drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c - linux - Git at Google

 /*
  *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
  *
  *  Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include "mxl111sf-phy.h"
 #include "mxl111sf-reg.h"

 int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
 {
 	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
 		{0x07, 0xff, 0x0c},
 		{0x58, 0xff, 0x9d},
 		{0x09, 0xff, 0x00},
 		{0x06, 0xff, 0x06},
 		{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
 		{0x8d, 0x01, 0x01}, /* NEGATE_Q */
 		{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
 		{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
 		{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
 		{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
 		{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
 		{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
 		{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
 		{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
 		{0x00, 0xff, 0x01}, /* Change to page 1 */
 		{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
 		{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
 		{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
 		{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
 		{0x00, 0xff, 0x00}, /* Change to page 0 */
 		{0,    0,    0}
 	};

 	mxl_debug("()");

 	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
 }

 int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
 {
 	int ret;
 	mxl_debug("()");

 	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
 	if (mxl_fail(ret))
 		goto fail;
 	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
 	mxl_fail(ret);
 fail:
 	return ret;
 }

 int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
 {
 	int ret;

 	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
 		"MXL_SOC_MODE" : "MXL_TUNER_MODE");

 	/* set device mode */
 	ret = mxl111sf_write_reg(state, 0x03,
 				 MXL_SOC_MODE == mode ? 0x01 : 0x00);
 	if (mxl_fail(ret))
 		goto fail;

 	ret = mxl111sf_write_reg_mask(state,
 				      0x7d, 0x40, MXL_SOC_MODE == mode ?
 				      0x00 : /* enable impulse noise filter,
 						INF_BYP = 0 */
 				      0x40); /* disable impulse noise filter,
 						INF_BYP = 1 */
 	if (mxl_fail(ret))
 		goto fail;

 	state->device_mode = mode;
 fail:
 	return ret;
 }

 /* power up tuner */
 int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
 {
 	mxl_debug("(%d)", onoff);

 	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
 }

 int mxl111sf_disable_656_port(struct mxl111sf_state *state)
 {
 	mxl_debug("()");

 	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
 }

 int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
 {
 	mxl_debug("()");

 	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
 }

 /* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
 int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
 			    unsigned int parallel_serial,
 			    unsigned int msb_lsb_1st,
 			    unsigned int clock_phase,
 			    unsigned int mpeg_valid_pol,
 			    unsigned int mpeg_sync_pol)
 {
 	int ret;
 	u8 mode, tmp;

 	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
 		  clock_phase, mpeg_valid_pol, mpeg_sync_pol);

 	/* Enable PIN MUX */
 	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
 	mxl_fail(ret);

 	/* Configure MPEG Clock phase */
 	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);

 	if (clock_phase == TSIF_NORMAL)
 		mode &= ~V6_INVERTED_CLK_PHASE;
 	else
 		mode |= V6_INVERTED_CLK_PHASE;

 	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
 	mxl_fail(ret);

 	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
 	 * Get current configuration */
 	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
 	mxl_fail(ret);

 	/* Data Input mode */
 	if (parallel_serial == TSIF_INPUT_PARALLEL) {
 		/* Disable serial mode */
 		mode &= ~V6_MPEG_IN_DATA_SERIAL;

 		/* Enable Parallel mode */
 		mode |= V6_MPEG_IN_DATA_PARALLEL;
 	} else {
 		/* Disable Parallel mode */
 		mode &= ~V6_MPEG_IN_DATA_PARALLEL;

 		/* Enable Serial Mode */
 		mode |= V6_MPEG_IN_DATA_SERIAL;

 		/* If serial interface is chosen, configure
 		   MSB or LSB order in transmission */
 		ret = mxl111sf_read_reg(state,
 					V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 					&tmp);
 		mxl_fail(ret);

 		if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
 			tmp |= V6_MPEG_SER_MSB_FIRST;
 		else
 			tmp &= ~V6_MPEG_SER_MSB_FIRST;

 		ret = mxl111sf_write_reg(state,
 					 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 					 tmp);
 		mxl_fail(ret);
 	}

 	/* MPEG Sync polarity */
 	if (mpeg_sync_pol == TSIF_NORMAL)
 		mode &= ~V6_INVERTED_MPEG_SYNC;
 	else
 		mode |= V6_INVERTED_MPEG_SYNC;

 	/* MPEG Valid polarity */
 	if (mpeg_valid_pol == 0)
 		mode &= ~V6_INVERTED_MPEG_VALID;
 	else
 		mode |= V6_INVERTED_MPEG_VALID;

 	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
 	mxl_fail(ret);

 	return ret;
 }

 int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
 {
 	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
 		{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
 		{0x15, 0x60, 0x60}, /* Enable I2S */
 		{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
 				       Inverted 656 Clock, I2S_SOFT_RESET,
 				       0 : Normal operation, 1 : Reset State */
 #if 0
 		{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
 #endif
 		{0x00, 0xff, 0x02}, /* Change to Control Page */
 		{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
 		{0x00, 0xff, 0x00},
 		{0,    0,    0}
 	};
 	int ret;

 	mxl_debug("(0x%02x)", sample_size);

 	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
 	if (mxl_fail(ret))
 		goto fail;

 	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
 	mxl_fail(ret);
 fail:
 	return ret;
 }

 int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
 {
 	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
 		{0x15, 0x40, 0x00},
 		{0,    0,    0}
 	};

 	mxl_debug("()");

 	return mxl111sf_ctrl_program_regs(state, disable_i2s);
 }

 int mxl111sf_config_i2s(struct mxl111sf_state *state,
 			u8 msb_start_pos, u8 data_width)
 {
 	int ret;
 	u8 tmp;

 	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);

 	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
 	if (mxl_fail(ret))
 		goto fail;

 	tmp &= 0xe0;
 	tmp |= msb_start_pos;
 	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
 	if (mxl_fail(ret))
 		goto fail;

 	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
 	if (mxl_fail(ret))
 		goto fail;

 	tmp &= 0xe0;
 	tmp |= data_width;
 	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
 	mxl_fail(ret);
 fail:
 	return ret;
 }

 int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
 {
 	u8 val;
 	int ret;

 	mxl_debug("(%d)", onoff);

 	ret = mxl111sf_write_reg(state, 0x00, 0x02);
 	if (mxl_fail(ret))
 		goto fail;

 	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
 	if (mxl_fail(ret))
 		goto fail;

 	if (onoff)
 		val |= 0x04;
 	else
 		val &= ~0x04;

 	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
 	if (mxl_fail(ret))
 		goto fail;

 	ret = mxl111sf_write_reg(state, 0x00, 0x00);
 	mxl_fail(ret);
 fail:
 	return ret;
 }

 int mxl111sf_idac_config(struct mxl111sf_state *state,
 			 u8 control_mode, u8 current_setting,
 			 u8 current_value, u8 hysteresis_value)
 {
 	int ret;
 	u8 val;
 	/* current value will be set for both automatic & manual IDAC control */
 	val = current_value;

 	if (control_mode == IDAC_MANUAL_CONTROL) {
 		/* enable manual control of IDAC */
 		val |= IDAC_MANUAL_CONTROL_BIT_MASK;

 		if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
 			/* enable current sinking in manual mode */
 			val |= IDAC_CURRENT_SINKING_BIT_MASK;
 		else
 			/* disable current sinking in manual mode */
 			val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
 	} else {
 		/* disable manual control of IDAC */
 		val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;

 		/* set hysteresis value  reg: 0x0B<5:0> */
 		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
 					 (hysteresis_value & 0x3F));
 		mxl_fail(ret);
 	}

 	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
 	mxl_fail(ret);

 	return ret;
 }

 /*
  * Local variables:
  * c-basic-offset: 8
  * End:
  */
	/*
	* mxl111sf-phy.c - driver for the MaxLinear MXL111SF
	*
	* Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include "mxl111sf-phy.h"
	#include "mxl111sf-reg.h"

	int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
	{
	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
	{0x07, 0xff, 0x0c},
	{0x58, 0xff, 0x9d},
	{0x09, 0xff, 0x00},
	{0x06, 0xff, 0x06},
	{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
	{0x8d, 0x01, 0x01}, /* NEGATE_Q */
	{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
	{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
	{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
	{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
	{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
	{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
	{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
	{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
	{0x00, 0xff, 0x01}, /* Change to page 1 */
	{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
	{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
	{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
	{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
	{0x00, 0xff, 0x00}, /* Change to page 0 */
	{0, 0, 0}
	};

	mxl_debug("()");

	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
	}

	int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
	{
	int ret;
	mxl_debug("()");

	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
	if (mxl_fail(ret))
	goto fail;
	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
	mxl_fail(ret);
	fail:
	return ret;
	}

	int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
	{
	int ret;

	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
	"MXL_SOC_MODE" : "MXL_TUNER_MODE");

	/* set device mode */
	ret = mxl111sf_write_reg(state, 0x03,
	MXL_SOC_MODE == mode ? 0x01 : 0x00);
	if (mxl_fail(ret))
	goto fail;

	ret = mxl111sf_write_reg_mask(state,
	0x7d, 0x40, MXL_SOC_MODE == mode ?
	0x00 : /* enable impulse noise filter,
	INF_BYP = 0 */
	0x40); /* disable impulse noise filter,
	INF_BYP = 1 */
	if (mxl_fail(ret))
	goto fail;

	state->device_mode = mode;
	fail:
	return ret;
	}

	/* power up tuner */
	int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
	{
	mxl_debug("(%d)", onoff);

	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
	}

	int mxl111sf_disable_656_port(struct mxl111sf_state *state)
	{
	mxl_debug("()");

	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
	}

	int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
	{
	mxl_debug("()");

	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
	}

	/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
	int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
	unsigned int parallel_serial,
	unsigned int msb_lsb_1st,
	unsigned int clock_phase,
	unsigned int mpeg_valid_pol,
	unsigned int mpeg_sync_pol)
	{
	int ret;
	u8 mode, tmp;

	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
	clock_phase, mpeg_valid_pol, mpeg_sync_pol);

	/* Enable PIN MUX */
	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
	mxl_fail(ret);

	/* Configure MPEG Clock phase */
	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);

	if (clock_phase == TSIF_NORMAL)
	mode &= ~V6_INVERTED_CLK_PHASE;
	else
	mode \|= V6_INVERTED_CLK_PHASE;

	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
	mxl_fail(ret);

	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
	* Get current configuration */
	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
	mxl_fail(ret);

	/* Data Input mode */
	if (parallel_serial == TSIF_INPUT_PARALLEL) {
	/* Disable serial mode */
	mode &= ~V6_MPEG_IN_DATA_SERIAL;

	/* Enable Parallel mode */
	mode \|= V6_MPEG_IN_DATA_PARALLEL;
	} else {
	/* Disable Parallel mode */
	mode &= ~V6_MPEG_IN_DATA_PARALLEL;

	/* Enable Serial Mode */
	mode \|= V6_MPEG_IN_DATA_SERIAL;

	/* If serial interface is chosen, configure
	MSB or LSB order in transmission */
	ret = mxl111sf_read_reg(state,
	V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
	&tmp);
	mxl_fail(ret);

	if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
	tmp \|= V6_MPEG_SER_MSB_FIRST;
	else
	tmp &= ~V6_MPEG_SER_MSB_FIRST;

	ret = mxl111sf_write_reg(state,
	V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
	tmp);
	mxl_fail(ret);
	}

	/* MPEG Sync polarity */
	if (mpeg_sync_pol == TSIF_NORMAL)
	mode &= ~V6_INVERTED_MPEG_SYNC;
	else
	mode \|= V6_INVERTED_MPEG_SYNC;

	/* MPEG Valid polarity */
	if (mpeg_valid_pol == 0)
	mode &= ~V6_INVERTED_MPEG_VALID;
	else
	mode \|= V6_INVERTED_MPEG_VALID;

	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
	mxl_fail(ret);

	return ret;
	}

	int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
	{
	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
	{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
	{0x15, 0x60, 0x60}, /* Enable I2S */
	{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
	Inverted 656 Clock, I2S_SOFT_RESET,
	0 : Normal operation, 1 : Reset State */
	#if 0
	{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
	#endif
	{0x00, 0xff, 0x02}, /* Change to Control Page */
	{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
	{0x00, 0xff, 0x00},
	{0, 0, 0}
	};
	int ret;

	mxl_debug("(0x%02x)", sample_size);

	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
	if (mxl_fail(ret))
	goto fail;

	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
	mxl_fail(ret);
	fail:
	return ret;
	}

	int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
	{
	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
	{0x15, 0x40, 0x00},
	{0, 0, 0}
	};

	mxl_debug("()");

	return mxl111sf_ctrl_program_regs(state, disable_i2s);
	}

	int mxl111sf_config_i2s(struct mxl111sf_state *state,
	u8 msb_start_pos, u8 data_width)
	{
	int ret;
	u8 tmp;

	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);

	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
	if (mxl_fail(ret))
	goto fail;

	tmp &= 0xe0;
	tmp \|= msb_start_pos;
	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
	if (mxl_fail(ret))
	goto fail;

	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
	if (mxl_fail(ret))
	goto fail;

	tmp &= 0xe0;
	tmp \|= data_width;
	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
	mxl_fail(ret);
	fail:
	return ret;
	}

	int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
	{
	u8 val;
	int ret;

	mxl_debug("(%d)", onoff);

	ret = mxl111sf_write_reg(state, 0x00, 0x02);
	if (mxl_fail(ret))
	goto fail;

	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
	if (mxl_fail(ret))
	goto fail;

	if (onoff)
	val \|= 0x04;
	else
	val &= ~0x04;

	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
	if (mxl_fail(ret))
	goto fail;

	ret = mxl111sf_write_reg(state, 0x00, 0x00);
	mxl_fail(ret);
	fail:
	return ret;
	}

	int mxl111sf_idac_config(struct mxl111sf_state *state,
	u8 control_mode, u8 current_setting,
	u8 current_value, u8 hysteresis_value)
	{
	int ret;
	u8 val;
	/* current value will be set for both automatic & manual IDAC control */
	val = current_value;

	if (control_mode == IDAC_MANUAL_CONTROL) {
	/* enable manual control of IDAC */
	val \|= IDAC_MANUAL_CONTROL_BIT_MASK;

	if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
	/* enable current sinking in manual mode */
	val \|= IDAC_CURRENT_SINKING_BIT_MASK;
	else
	/* disable current sinking in manual mode */
	val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
	} else {
	/* disable manual control of IDAC */
	val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;

	/* set hysteresis value reg: 0x0B<5:0> */
	ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
	(hysteresis_value & 0x3F));
	mxl_fail(ret);
	}

	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
	mxl_fail(ret);

	return ret;
	}

	/*
	* Local variables:
	* c-basic-offset: 8
	* End:
	*/