| /* |
| * Renesas - AP-325RXA |
| * (Compatible with Algo System ., LTD. - AP-320A) |
| * |
| * Copyright (C) 2008 Renesas Solutions Corp. |
| * Author : Yusuke Goda <goda.yuske@renesas.com> |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mtd/sh_flctl.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/smsc911x.h> |
| #include <linux/gpio.h> |
| #include <linux/videodev2.h> |
| #include <linux/sh_intc.h> |
| #include <media/ov772x.h> |
| #include <media/soc_camera.h> |
| #include <media/soc_camera_platform.h> |
| #include <media/sh_mobile_ceu.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <asm/io.h> |
| #include <asm/clock.h> |
| #include <asm/suspend.h> |
| #include <cpu/sh7723.h> |
| |
| /* Dummy supplies, where voltage doesn't matter */ |
| static struct regulator_consumer_supply dummy_supplies[] = { |
| REGULATOR_SUPPLY("vddvario", "smsc911x"), |
| REGULATOR_SUPPLY("vdd33a", "smsc911x"), |
| }; |
| |
| static struct smsc911x_platform_config smsc911x_config = { |
| .phy_interface = PHY_INTERFACE_MODE_MII, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, |
| .flags = SMSC911X_USE_32BIT, |
| }; |
| |
| static struct resource smsc9118_resources[] = { |
| [0] = { |
| .start = 0xb6080000, |
| .end = 0xb60fffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x660), |
| .end = evt2irq(0x660), |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device smsc9118_device = { |
| .name = "smsc911x", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(smsc9118_resources), |
| .resource = smsc9118_resources, |
| .dev = { |
| .platform_data = &smsc911x_config, |
| }, |
| }; |
| |
| /* |
| * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF). |
| * If this area erased, this board can not boot. |
| */ |
| static struct mtd_partition ap325rxa_nor_flash_partitions[] = { |
| { |
| .name = "uboot", |
| .offset = 0, |
| .size = (1 * 1024 * 1024), |
| .mask_flags = MTD_WRITEABLE, /* Read-only */ |
| }, { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = (2 * 1024 * 1024), |
| }, { |
| .name = "free-area0", |
| .offset = MTDPART_OFS_APPEND, |
| .size = ((7 * 1024 * 1024) + (512 * 1024)), |
| }, { |
| .name = "CPLD-Data", |
| .offset = MTDPART_OFS_APPEND, |
| .mask_flags = MTD_WRITEABLE, /* Read-only */ |
| .size = (1024 * 128 * 2), |
| }, { |
| .name = "free-area1", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data ap325rxa_nor_flash_data = { |
| .width = 2, |
| .parts = ap325rxa_nor_flash_partitions, |
| .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), |
| }; |
| |
| static struct resource ap325rxa_nor_flash_resources[] = { |
| [0] = { |
| .name = "NOR Flash", |
| .start = 0x00000000, |
| .end = 0x00ffffff, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device ap325rxa_nor_flash_device = { |
| .name = "physmap-flash", |
| .resource = ap325rxa_nor_flash_resources, |
| .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), |
| .dev = { |
| .platform_data = &ap325rxa_nor_flash_data, |
| }, |
| }; |
| |
| static struct mtd_partition nand_partition_info[] = { |
| { |
| .name = "nand_data", |
| .offset = 0, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct resource nand_flash_resources[] = { |
| [0] = { |
| .start = 0xa4530000, |
| .end = 0xa45300ff, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct sh_flctl_platform_data nand_flash_data = { |
| .parts = nand_partition_info, |
| .nr_parts = ARRAY_SIZE(nand_partition_info), |
| .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E, |
| .has_hwecc = 1, |
| }; |
| |
| static struct platform_device nand_flash_device = { |
| .name = "sh_flctl", |
| .resource = nand_flash_resources, |
| .num_resources = ARRAY_SIZE(nand_flash_resources), |
| .dev = { |
| .platform_data = &nand_flash_data, |
| }, |
| }; |
| |
| #define FPGA_LCDREG 0xB4100180 |
| #define FPGA_BKLREG 0xB4100212 |
| #define FPGA_LCDREG_VAL 0x0018 |
| #define PORT_MSELCRB 0xA4050182 |
| #define PORT_HIZCRC 0xA405015C |
| #define PORT_DRVCRA 0xA405018A |
| #define PORT_DRVCRB 0xA405018C |
| |
| static int ap320_wvga_set_brightness(int brightness) |
| { |
| if (brightness) { |
| gpio_set_value(GPIO_PTS3, 0); |
| __raw_writew(0x100, FPGA_BKLREG); |
| } else { |
| __raw_writew(0, FPGA_BKLREG); |
| gpio_set_value(GPIO_PTS3, 1); |
| } |
| |
| return 0; |
| } |
| |
| static void ap320_wvga_power_on(void) |
| { |
| msleep(100); |
| |
| /* ASD AP-320/325 LCD ON */ |
| __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG); |
| } |
| |
| static void ap320_wvga_power_off(void) |
| { |
| /* ASD AP-320/325 LCD OFF */ |
| __raw_writew(0, FPGA_LCDREG); |
| } |
| |
| static const struct fb_videomode ap325rxa_lcdc_modes[] = { |
| { |
| .name = "LB070WV1", |
| .xres = 800, |
| .yres = 480, |
| .left_margin = 32, |
| .right_margin = 160, |
| .hsync_len = 8, |
| .upper_margin = 63, |
| .lower_margin = 80, |
| .vsync_len = 1, |
| .sync = 0, /* hsync and vsync are active low */ |
| }, |
| }; |
| |
| static struct sh_mobile_lcdc_info lcdc_info = { |
| .clock_source = LCDC_CLK_EXTERNAL, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .interface_type = RGB18, |
| .clock_divider = 1, |
| .lcd_modes = ap325rxa_lcdc_modes, |
| .num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes), |
| .panel_cfg = { |
| .width = 152, /* 7.0 inch */ |
| .height = 91, |
| .display_on = ap320_wvga_power_on, |
| .display_off = ap320_wvga_power_off, |
| }, |
| .bl_info = { |
| .name = "sh_mobile_lcdc_bl", |
| .max_brightness = 1, |
| .set_brightness = ap320_wvga_set_brightness, |
| }, |
| } |
| }; |
| |
| static struct resource lcdc_resources[] = { |
| [0] = { |
| .name = "LCDC", |
| .start = 0xfe940000, /* P4-only space */ |
| .end = 0xfe942fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x580), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device lcdc_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(lcdc_resources), |
| .resource = lcdc_resources, |
| .dev = { |
| .platform_data = &lcdc_info, |
| }, |
| }; |
| |
| static void camera_power(int val) |
| { |
| gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */ |
| mdelay(10); |
| } |
| |
| #ifdef CONFIG_I2C |
| /* support for the old ncm03j camera */ |
| static unsigned char camera_ncm03j_magic[] = |
| { |
| 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, |
| 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, |
| 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, |
| 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, |
| 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, |
| 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, |
| 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, |
| 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, |
| 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, |
| 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, |
| 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, |
| 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, |
| 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, |
| 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, |
| 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, |
| 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, |
| }; |
| |
| static int camera_probe(void) |
| { |
| struct i2c_adapter *a = i2c_get_adapter(0); |
| struct i2c_msg msg; |
| int ret; |
| |
| if (!a) |
| return -ENODEV; |
| |
| camera_power(1); |
| msg.addr = 0x6e; |
| msg.buf = camera_ncm03j_magic; |
| msg.len = 2; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| camera_power(0); |
| |
| return ret; |
| } |
| |
| static int camera_set_capture(struct soc_camera_platform_info *info, |
| int enable) |
| { |
| struct i2c_adapter *a = i2c_get_adapter(0); |
| struct i2c_msg msg; |
| int ret = 0; |
| int i; |
| |
| camera_power(0); |
| if (!enable) |
| return 0; /* no disable for now */ |
| |
| camera_power(1); |
| for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { |
| u_int8_t buf[8]; |
| |
| msg.addr = 0x6e; |
| msg.buf = buf; |
| msg.len = 2; |
| msg.flags = 0; |
| |
| buf[0] = camera_ncm03j_magic[i]; |
| buf[1] = camera_ncm03j_magic[i + 1]; |
| |
| ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); |
| } |
| |
| return ret; |
| } |
| |
| static int ap325rxa_camera_add(struct soc_camera_device *icd); |
| static void ap325rxa_camera_del(struct soc_camera_device *icd); |
| |
| static struct soc_camera_platform_info camera_info = { |
| .format_name = "UYVY", |
| .format_depth = 16, |
| .format = { |
| .code = MEDIA_BUS_FMT_UYVY8_2X8, |
| .colorspace = V4L2_COLORSPACE_SMPTE170M, |
| .field = V4L2_FIELD_NONE, |
| .width = 640, |
| .height = 480, |
| }, |
| .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | |
| V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | |
| V4L2_MBUS_DATA_ACTIVE_HIGH, |
| .mbus_type = V4L2_MBUS_PARALLEL, |
| .set_capture = camera_set_capture, |
| }; |
| |
| static struct soc_camera_link camera_link = { |
| .bus_id = 0, |
| .add_device = ap325rxa_camera_add, |
| .del_device = ap325rxa_camera_del, |
| .module_name = "soc_camera_platform", |
| .priv = &camera_info, |
| }; |
| |
| static struct platform_device *camera_device; |
| |
| static void ap325rxa_camera_release(struct device *dev) |
| { |
| soc_camera_platform_release(&camera_device); |
| } |
| |
| static int ap325rxa_camera_add(struct soc_camera_device *icd) |
| { |
| int ret = soc_camera_platform_add(icd, &camera_device, &camera_link, |
| ap325rxa_camera_release, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = camera_probe(); |
| if (ret < 0) |
| soc_camera_platform_del(icd, camera_device, &camera_link); |
| |
| return ret; |
| } |
| |
| static void ap325rxa_camera_del(struct soc_camera_device *icd) |
| { |
| soc_camera_platform_del(icd, camera_device, &camera_link); |
| } |
| #endif /* CONFIG_I2C */ |
| |
| static int ov7725_power(struct device *dev, int mode) |
| { |
| camera_power(0); |
| if (mode) |
| camera_power(1); |
| |
| return 0; |
| } |
| |
| static struct sh_mobile_ceu_info sh_mobile_ceu_info = { |
| .flags = SH_CEU_FLAG_USE_8BIT_BUS, |
| }; |
| |
| static struct resource ceu_resources[] = { |
| [0] = { |
| .name = "CEU", |
| .start = 0xfe910000, |
| .end = 0xfe91009f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x880), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| /* place holder for contiguous memory */ |
| }, |
| }; |
| |
| static struct platform_device ceu_device = { |
| .name = "sh_mobile_ceu", |
| .id = 0, /* "ceu0" clock */ |
| .num_resources = ARRAY_SIZE(ceu_resources), |
| .resource = ceu_resources, |
| .dev = { |
| .platform_data = &sh_mobile_ceu_info, |
| }, |
| }; |
| |
| /* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ |
| static struct regulator_consumer_supply fixed3v3_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), |
| }; |
| |
| static struct resource sdhi0_cn3_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0x04ce0000, |
| .end = 0x04ce00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0xe80), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mobile_sdhi_info sdhi0_cn3_data = { |
| .tmio_caps = MMC_CAP_SDIO_IRQ, |
| }; |
| |
| static struct platform_device sdhi0_cn3_device = { |
| .name = "sh_mobile_sdhi", |
| .id = 0, /* "sdhi0" clock */ |
| .num_resources = ARRAY_SIZE(sdhi0_cn3_resources), |
| .resource = sdhi0_cn3_resources, |
| .dev = { |
| .platform_data = &sdhi0_cn3_data, |
| }, |
| }; |
| |
| static struct resource sdhi1_cn7_resources[] = { |
| [0] = { |
| .name = "SDHI1", |
| .start = 0x04cf0000, |
| .end = 0x04cf00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x4e0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mobile_sdhi_info sdhi1_cn7_data = { |
| .tmio_caps = MMC_CAP_SDIO_IRQ, |
| }; |
| |
| static struct platform_device sdhi1_cn7_device = { |
| .name = "sh_mobile_sdhi", |
| .id = 1, /* "sdhi1" clock */ |
| .num_resources = ARRAY_SIZE(sdhi1_cn7_resources), |
| .resource = sdhi1_cn7_resources, |
| .dev = { |
| .platform_data = &sdhi1_cn7_data, |
| }, |
| }; |
| |
| static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { |
| { |
| I2C_BOARD_INFO("pcf8563", 0x51), |
| }, |
| }; |
| |
| static struct i2c_board_info ap325rxa_i2c_camera[] = { |
| { |
| I2C_BOARD_INFO("ov772x", 0x21), |
| }, |
| }; |
| |
| static struct ov772x_camera_info ov7725_info = { |
| .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, |
| .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), |
| }; |
| |
| static struct soc_camera_link ov7725_link = { |
| .bus_id = 0, |
| .power = ov7725_power, |
| .board_info = &ap325rxa_i2c_camera[0], |
| .i2c_adapter_id = 0, |
| .priv = &ov7725_info, |
| }; |
| |
| static struct platform_device ap325rxa_camera[] = { |
| { |
| .name = "soc-camera-pdrv", |
| .id = 0, |
| .dev = { |
| .platform_data = &ov7725_link, |
| }, |
| }, { |
| .name = "soc-camera-pdrv", |
| .id = 1, |
| .dev = { |
| .platform_data = &camera_link, |
| }, |
| }, |
| }; |
| |
| static struct platform_device *ap325rxa_devices[] __initdata = { |
| &smsc9118_device, |
| &ap325rxa_nor_flash_device, |
| &lcdc_device, |
| &ceu_device, |
| &nand_flash_device, |
| &sdhi0_cn3_device, |
| &sdhi1_cn7_device, |
| &ap325rxa_camera[0], |
| &ap325rxa_camera[1], |
| }; |
| |
| extern char ap325rxa_sdram_enter_start; |
| extern char ap325rxa_sdram_enter_end; |
| extern char ap325rxa_sdram_leave_start; |
| extern char ap325rxa_sdram_leave_end; |
| |
| static int __init ap325rxa_devices_setup(void) |
| { |
| /* register board specific self-refresh code */ |
| sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, |
| &ap325rxa_sdram_enter_start, |
| &ap325rxa_sdram_enter_end, |
| &ap325rxa_sdram_leave_start, |
| &ap325rxa_sdram_leave_end); |
| |
| regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, |
| ARRAY_SIZE(fixed3v3_power_consumers), 3300000); |
| regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
| |
| /* LD3 and LD4 LEDs */ |
| gpio_request(GPIO_PTX5, NULL); /* RUN */ |
| gpio_direction_output(GPIO_PTX5, 1); |
| gpio_export(GPIO_PTX5, 0); |
| |
| gpio_request(GPIO_PTX4, NULL); /* INDICATOR */ |
| gpio_direction_output(GPIO_PTX4, 0); |
| gpio_export(GPIO_PTX4, 0); |
| |
| /* SW1 input */ |
| gpio_request(GPIO_PTF7, NULL); /* MODE */ |
| gpio_direction_input(GPIO_PTF7); |
| gpio_export(GPIO_PTF7, 0); |
| |
| /* LCDC */ |
| gpio_request(GPIO_FN_LCDD15, NULL); |
| gpio_request(GPIO_FN_LCDD14, NULL); |
| gpio_request(GPIO_FN_LCDD13, NULL); |
| gpio_request(GPIO_FN_LCDD12, NULL); |
| gpio_request(GPIO_FN_LCDD11, NULL); |
| gpio_request(GPIO_FN_LCDD10, NULL); |
| gpio_request(GPIO_FN_LCDD9, NULL); |
| gpio_request(GPIO_FN_LCDD8, NULL); |
| gpio_request(GPIO_FN_LCDD7, NULL); |
| gpio_request(GPIO_FN_LCDD6, NULL); |
| gpio_request(GPIO_FN_LCDD5, NULL); |
| gpio_request(GPIO_FN_LCDD4, NULL); |
| gpio_request(GPIO_FN_LCDD3, NULL); |
| gpio_request(GPIO_FN_LCDD2, NULL); |
| gpio_request(GPIO_FN_LCDD1, NULL); |
| gpio_request(GPIO_FN_LCDD0, NULL); |
| gpio_request(GPIO_FN_LCDLCLK_PTR, NULL); |
| gpio_request(GPIO_FN_LCDDCK, NULL); |
| gpio_request(GPIO_FN_LCDVEPWC, NULL); |
| gpio_request(GPIO_FN_LCDVCPWC, NULL); |
| gpio_request(GPIO_FN_LCDVSYN, NULL); |
| gpio_request(GPIO_FN_LCDHSYN, NULL); |
| gpio_request(GPIO_FN_LCDDISP, NULL); |
| gpio_request(GPIO_FN_LCDDON, NULL); |
| |
| /* LCD backlight */ |
| gpio_request(GPIO_PTS3, NULL); |
| gpio_direction_output(GPIO_PTS3, 1); |
| |
| /* CEU */ |
| gpio_request(GPIO_FN_VIO_CLK2, NULL); |
| gpio_request(GPIO_FN_VIO_VD2, NULL); |
| gpio_request(GPIO_FN_VIO_HD2, NULL); |
| gpio_request(GPIO_FN_VIO_FLD, NULL); |
| gpio_request(GPIO_FN_VIO_CKO, NULL); |
| gpio_request(GPIO_FN_VIO_D15, NULL); |
| gpio_request(GPIO_FN_VIO_D14, NULL); |
| gpio_request(GPIO_FN_VIO_D13, NULL); |
| gpio_request(GPIO_FN_VIO_D12, NULL); |
| gpio_request(GPIO_FN_VIO_D11, NULL); |
| gpio_request(GPIO_FN_VIO_D10, NULL); |
| gpio_request(GPIO_FN_VIO_D9, NULL); |
| gpio_request(GPIO_FN_VIO_D8, NULL); |
| |
| gpio_request(GPIO_PTZ7, NULL); |
| gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */ |
| gpio_request(GPIO_PTZ6, NULL); |
| gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */ |
| gpio_request(GPIO_PTZ5, NULL); |
| gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */ |
| gpio_request(GPIO_PTZ4, NULL); |
| gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */ |
| |
| __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); |
| |
| /* FLCTL */ |
| gpio_request(GPIO_FN_FCE, NULL); |
| gpio_request(GPIO_FN_NAF7, NULL); |
| gpio_request(GPIO_FN_NAF6, NULL); |
| gpio_request(GPIO_FN_NAF5, NULL); |
| gpio_request(GPIO_FN_NAF4, NULL); |
| gpio_request(GPIO_FN_NAF3, NULL); |
| gpio_request(GPIO_FN_NAF2, NULL); |
| gpio_request(GPIO_FN_NAF1, NULL); |
| gpio_request(GPIO_FN_NAF0, NULL); |
| gpio_request(GPIO_FN_FCDE, NULL); |
| gpio_request(GPIO_FN_FOE, NULL); |
| gpio_request(GPIO_FN_FSC, NULL); |
| gpio_request(GPIO_FN_FWE, NULL); |
| gpio_request(GPIO_FN_FRB, NULL); |
| |
| __raw_writew(0, PORT_HIZCRC); |
| __raw_writew(0xFFFF, PORT_DRVCRA); |
| __raw_writew(0xFFFF, PORT_DRVCRB); |
| |
| platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); |
| |
| /* SDHI0 - CN3 - SD CARD */ |
| gpio_request(GPIO_FN_SDHI0CD_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0WP_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0D3_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0D2_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0D1_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0D0_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL); |
| gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL); |
| |
| /* SDHI1 - CN7 - MICRO SD CARD */ |
| gpio_request(GPIO_FN_SDHI1CD, NULL); |
| gpio_request(GPIO_FN_SDHI1D3, NULL); |
| gpio_request(GPIO_FN_SDHI1D2, NULL); |
| gpio_request(GPIO_FN_SDHI1D1, NULL); |
| gpio_request(GPIO_FN_SDHI1D0, NULL); |
| gpio_request(GPIO_FN_SDHI1CMD, NULL); |
| gpio_request(GPIO_FN_SDHI1CLK, NULL); |
| |
| i2c_register_board_info(0, ap325rxa_i2c_devices, |
| ARRAY_SIZE(ap325rxa_i2c_devices)); |
| |
| return platform_add_devices(ap325rxa_devices, |
| ARRAY_SIZE(ap325rxa_devices)); |
| } |
| arch_initcall(ap325rxa_devices_setup); |
| |
| /* Return the board specific boot mode pin configuration */ |
| static int ap325rxa_mode_pins(void) |
| { |
| /* MD0=0, MD1=0, MD2=0: Clock Mode 0 |
| * MD3=0: 16-bit Area0 Bus Width |
| * MD5=1: Little Endian |
| * TSTMD=1, MD8=1: Test Mode Disabled |
| */ |
| return MODE_PIN5 | MODE_PIN8; |
| } |
| |
| static struct sh_machine_vector mv_ap325rxa __initmv = { |
| .mv_name = "AP-325RXA", |
| .mv_mode_pins = ap325rxa_mode_pins, |
| }; |