| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2016, Semihalf |
| * Author: Tomasz Nowicki <tn@semihalf.com> |
| * |
| * This file implements early detection/parsing of I/O mapping |
| * reported to OS through firmware via I/O Remapping Table (IORT) |
| * IORT document number: ARM DEN 0049A |
| */ |
| |
| #define pr_fmt(fmt) "ACPI: IORT: " fmt |
| |
| #include <linux/acpi_iort.h> |
| #include <linux/iommu.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #define IORT_TYPE_MASK(type) (1 << (type)) |
| #define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP) |
| #define IORT_IOMMU_TYPE ((1 << ACPI_IORT_NODE_SMMU) | \ |
| (1 << ACPI_IORT_NODE_SMMU_V3)) |
| |
| struct iort_its_msi_chip { |
| struct list_head list; |
| struct fwnode_handle *fw_node; |
| phys_addr_t base_addr; |
| u32 translation_id; |
| }; |
| |
| struct iort_fwnode { |
| struct list_head list; |
| struct acpi_iort_node *iort_node; |
| struct fwnode_handle *fwnode; |
| }; |
| static LIST_HEAD(iort_fwnode_list); |
| static DEFINE_SPINLOCK(iort_fwnode_lock); |
| |
| /** |
| * iort_set_fwnode() - Create iort_fwnode and use it to register |
| * iommu data in the iort_fwnode_list |
| * |
| * @node: IORT table node associated with the IOMMU |
| * @fwnode: fwnode associated with the IORT node |
| * |
| * Returns: 0 on success |
| * <0 on failure |
| */ |
| static inline int iort_set_fwnode(struct acpi_iort_node *iort_node, |
| struct fwnode_handle *fwnode) |
| { |
| struct iort_fwnode *np; |
| |
| np = kzalloc(sizeof(struct iort_fwnode), GFP_ATOMIC); |
| |
| if (WARN_ON(!np)) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&np->list); |
| np->iort_node = iort_node; |
| np->fwnode = fwnode; |
| |
| spin_lock(&iort_fwnode_lock); |
| list_add_tail(&np->list, &iort_fwnode_list); |
| spin_unlock(&iort_fwnode_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * iort_get_fwnode() - Retrieve fwnode associated with an IORT node |
| * |
| * @node: IORT table node to be looked-up |
| * |
| * Returns: fwnode_handle pointer on success, NULL on failure |
| */ |
| static inline struct fwnode_handle *iort_get_fwnode( |
| struct acpi_iort_node *node) |
| { |
| struct iort_fwnode *curr; |
| struct fwnode_handle *fwnode = NULL; |
| |
| spin_lock(&iort_fwnode_lock); |
| list_for_each_entry(curr, &iort_fwnode_list, list) { |
| if (curr->iort_node == node) { |
| fwnode = curr->fwnode; |
| break; |
| } |
| } |
| spin_unlock(&iort_fwnode_lock); |
| |
| return fwnode; |
| } |
| |
| /** |
| * iort_delete_fwnode() - Delete fwnode associated with an IORT node |
| * |
| * @node: IORT table node associated with fwnode to delete |
| */ |
| static inline void iort_delete_fwnode(struct acpi_iort_node *node) |
| { |
| struct iort_fwnode *curr, *tmp; |
| |
| spin_lock(&iort_fwnode_lock); |
| list_for_each_entry_safe(curr, tmp, &iort_fwnode_list, list) { |
| if (curr->iort_node == node) { |
| list_del(&curr->list); |
| kfree(curr); |
| break; |
| } |
| } |
| spin_unlock(&iort_fwnode_lock); |
| } |
| |
| /** |
| * iort_get_iort_node() - Retrieve iort_node associated with an fwnode |
| * |
| * @fwnode: fwnode associated with device to be looked-up |
| * |
| * Returns: iort_node pointer on success, NULL on failure |
| */ |
| static inline struct acpi_iort_node *iort_get_iort_node( |
| struct fwnode_handle *fwnode) |
| { |
| struct iort_fwnode *curr; |
| struct acpi_iort_node *iort_node = NULL; |
| |
| spin_lock(&iort_fwnode_lock); |
| list_for_each_entry(curr, &iort_fwnode_list, list) { |
| if (curr->fwnode == fwnode) { |
| iort_node = curr->iort_node; |
| break; |
| } |
| } |
| spin_unlock(&iort_fwnode_lock); |
| |
| return iort_node; |
| } |
| |
| typedef acpi_status (*iort_find_node_callback) |
| (struct acpi_iort_node *node, void *context); |
| |
| /* Root pointer to the mapped IORT table */ |
| static struct acpi_table_header *iort_table; |
| |
| static LIST_HEAD(iort_msi_chip_list); |
| static DEFINE_SPINLOCK(iort_msi_chip_lock); |
| |
| /** |
| * iort_register_domain_token() - register domain token along with related |
| * ITS ID and base address to the list from where we can get it back later on. |
| * @trans_id: ITS ID. |
| * @base: ITS base address. |
| * @fw_node: Domain token. |
| * |
| * Returns: 0 on success, -ENOMEM if no memory when allocating list element |
| */ |
| int iort_register_domain_token(int trans_id, phys_addr_t base, |
| struct fwnode_handle *fw_node) |
| { |
| struct iort_its_msi_chip *its_msi_chip; |
| |
| its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); |
| if (!its_msi_chip) |
| return -ENOMEM; |
| |
| its_msi_chip->fw_node = fw_node; |
| its_msi_chip->translation_id = trans_id; |
| its_msi_chip->base_addr = base; |
| |
| spin_lock(&iort_msi_chip_lock); |
| list_add(&its_msi_chip->list, &iort_msi_chip_list); |
| spin_unlock(&iort_msi_chip_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * iort_deregister_domain_token() - Deregister domain token based on ITS ID |
| * @trans_id: ITS ID. |
| * |
| * Returns: none. |
| */ |
| void iort_deregister_domain_token(int trans_id) |
| { |
| struct iort_its_msi_chip *its_msi_chip, *t; |
| |
| spin_lock(&iort_msi_chip_lock); |
| list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { |
| if (its_msi_chip->translation_id == trans_id) { |
| list_del(&its_msi_chip->list); |
| kfree(its_msi_chip); |
| break; |
| } |
| } |
| spin_unlock(&iort_msi_chip_lock); |
| } |
| |
| /** |
| * iort_find_domain_token() - Find domain token based on given ITS ID |
| * @trans_id: ITS ID. |
| * |
| * Returns: domain token when find on the list, NULL otherwise |
| */ |
| struct fwnode_handle *iort_find_domain_token(int trans_id) |
| { |
| struct fwnode_handle *fw_node = NULL; |
| struct iort_its_msi_chip *its_msi_chip; |
| |
| spin_lock(&iort_msi_chip_lock); |
| list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { |
| if (its_msi_chip->translation_id == trans_id) { |
| fw_node = its_msi_chip->fw_node; |
| break; |
| } |
| } |
| spin_unlock(&iort_msi_chip_lock); |
| |
| return fw_node; |
| } |
| |
| static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type, |
| iort_find_node_callback callback, |
| void *context) |
| { |
| struct acpi_iort_node *iort_node, *iort_end; |
| struct acpi_table_iort *iort; |
| int i; |
| |
| if (!iort_table) |
| return NULL; |
| |
| /* Get the first IORT node */ |
| iort = (struct acpi_table_iort *)iort_table; |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, |
| iort->node_offset); |
| iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, |
| iort_table->length); |
| |
| for (i = 0; i < iort->node_count; i++) { |
| if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, |
| "IORT node pointer overflows, bad table!\n")) |
| return NULL; |
| |
| if (iort_node->type == type && |
| ACPI_SUCCESS(callback(iort_node, context))) |
| return iort_node; |
| |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, |
| iort_node->length); |
| } |
| |
| return NULL; |
| } |
| |
| static acpi_status iort_match_node_callback(struct acpi_iort_node *node, |
| void *context) |
| { |
| struct device *dev = context; |
| acpi_status status = AE_NOT_FOUND; |
| |
| if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) { |
| struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_device *adev = to_acpi_device_node(dev->fwnode); |
| struct acpi_iort_named_component *ncomp; |
| |
| if (!adev) |
| goto out; |
| |
| status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf); |
| if (ACPI_FAILURE(status)) { |
| dev_warn(dev, "Can't get device full path name\n"); |
| goto out; |
| } |
| |
| ncomp = (struct acpi_iort_named_component *)node->node_data; |
| status = !strcmp(ncomp->device_name, buf.pointer) ? |
| AE_OK : AE_NOT_FOUND; |
| acpi_os_free(buf.pointer); |
| } else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { |
| struct acpi_iort_root_complex *pci_rc; |
| struct pci_bus *bus; |
| |
| bus = to_pci_bus(dev); |
| pci_rc = (struct acpi_iort_root_complex *)node->node_data; |
| |
| /* |
| * It is assumed that PCI segment numbers maps one-to-one |
| * with root complexes. Each segment number can represent only |
| * one root complex. |
| */ |
| status = pci_rc->pci_segment_number == pci_domain_nr(bus) ? |
| AE_OK : AE_NOT_FOUND; |
| } |
| out: |
| return status; |
| } |
| |
| static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, |
| u32 *rid_out) |
| { |
| /* Single mapping does not care for input id */ |
| if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { |
| if (type == ACPI_IORT_NODE_NAMED_COMPONENT || |
| type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { |
| *rid_out = map->output_base; |
| return 0; |
| } |
| |
| pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", |
| map, type); |
| return -ENXIO; |
| } |
| |
| if (rid_in < map->input_base || |
| (rid_in >= map->input_base + map->id_count)) |
| return -ENXIO; |
| |
| *rid_out = map->output_base + (rid_in - map->input_base); |
| return 0; |
| } |
| |
| static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, |
| u32 *id_out, int index) |
| { |
| struct acpi_iort_node *parent; |
| struct acpi_iort_id_mapping *map; |
| |
| if (!node->mapping_offset || !node->mapping_count || |
| index >= node->mapping_count) |
| return NULL; |
| |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, |
| node->mapping_offset + index * sizeof(*map)); |
| |
| /* Firmware bug! */ |
| if (!map->output_reference) { |
| pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", |
| node, node->type); |
| return NULL; |
| } |
| |
| parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, |
| map->output_reference); |
| |
| if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { |
| if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || |
| node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || |
| node->type == ACPI_IORT_NODE_SMMU_V3 || |
| node->type == ACPI_IORT_NODE_PMCG) { |
| *id_out = map->output_base; |
| return parent; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static int iort_get_id_mapping_index(struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu_v3 *smmu; |
| |
| switch (node->type) { |
| case ACPI_IORT_NODE_SMMU_V3: |
| /* |
| * SMMUv3 dev ID mapping index was introduced in revision 1 |
| * table, not available in revision 0 |
| */ |
| if (node->revision < 1) |
| return -EINVAL; |
| |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; |
| /* |
| * ID mapping index is only ignored if all interrupts are |
| * GSIV based |
| */ |
| if (smmu->event_gsiv && smmu->pri_gsiv && smmu->gerr_gsiv |
| && smmu->sync_gsiv) |
| return -EINVAL; |
| |
| if (smmu->id_mapping_index >= node->mapping_count) { |
| pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", |
| node, node->type); |
| return -EINVAL; |
| } |
| |
| return smmu->id_mapping_index; |
| case ACPI_IORT_NODE_PMCG: |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, |
| u32 id_in, u32 *id_out, |
| u8 type_mask) |
| { |
| u32 id = id_in; |
| |
| /* Parse the ID mapping tree to find specified node type */ |
| while (node) { |
| struct acpi_iort_id_mapping *map; |
| int i, index; |
| |
| if (IORT_TYPE_MASK(node->type) & type_mask) { |
| if (id_out) |
| *id_out = id; |
| return node; |
| } |
| |
| if (!node->mapping_offset || !node->mapping_count) |
| goto fail_map; |
| |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, |
| node->mapping_offset); |
| |
| /* Firmware bug! */ |
| if (!map->output_reference) { |
| pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", |
| node, node->type); |
| goto fail_map; |
| } |
| |
| /* |
| * Get the special ID mapping index (if any) and skip its |
| * associated ID map to prevent erroneous multi-stage |
| * IORT ID translations. |
| */ |
| index = iort_get_id_mapping_index(node); |
| |
| /* Do the ID translation */ |
| for (i = 0; i < node->mapping_count; i++, map++) { |
| /* if it is special mapping index, skip it */ |
| if (i == index) |
| continue; |
| |
| if (!iort_id_map(map, node->type, id, &id)) |
| break; |
| } |
| |
| if (i == node->mapping_count) |
| goto fail_map; |
| |
| node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, |
| map->output_reference); |
| } |
| |
| fail_map: |
| /* Map input ID to output ID unchanged on mapping failure */ |
| if (id_out) |
| *id_out = id_in; |
| |
| return NULL; |
| } |
| |
| static struct acpi_iort_node *iort_node_map_platform_id( |
| struct acpi_iort_node *node, u32 *id_out, u8 type_mask, |
| int index) |
| { |
| struct acpi_iort_node *parent; |
| u32 id; |
| |
| /* step 1: retrieve the initial dev id */ |
| parent = iort_node_get_id(node, &id, index); |
| if (!parent) |
| return NULL; |
| |
| /* |
| * optional step 2: map the initial dev id if its parent is not |
| * the target type we want, map it again for the use cases such |
| * as NC (named component) -> SMMU -> ITS. If the type is matched, |
| * return the initial dev id and its parent pointer directly. |
| */ |
| if (!(IORT_TYPE_MASK(parent->type) & type_mask)) |
| parent = iort_node_map_id(parent, id, id_out, type_mask); |
| else |
| if (id_out) |
| *id_out = id; |
| |
| return parent; |
| } |
| |
| static struct acpi_iort_node *iort_find_dev_node(struct device *dev) |
| { |
| struct pci_bus *pbus; |
| |
| if (!dev_is_pci(dev)) { |
| struct acpi_iort_node *node; |
| /* |
| * scan iort_fwnode_list to see if it's an iort platform |
| * device (such as SMMU, PMCG),its iort node already cached |
| * and associated with fwnode when iort platform devices |
| * were initialized. |
| */ |
| node = iort_get_iort_node(dev->fwnode); |
| if (node) |
| return node; |
| |
| /* |
| * if not, then it should be a platform device defined in |
| * DSDT/SSDT (with Named Component node in IORT) |
| */ |
| return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, |
| iort_match_node_callback, dev); |
| } |
| |
| /* Find a PCI root bus */ |
| pbus = to_pci_dev(dev)->bus; |
| while (!pci_is_root_bus(pbus)) |
| pbus = pbus->parent; |
| |
| return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, |
| iort_match_node_callback, &pbus->dev); |
| } |
| |
| /** |
| * iort_msi_map_rid() - Map a MSI requester ID for a device |
| * @dev: The device for which the mapping is to be done. |
| * @req_id: The device requester ID. |
| * |
| * Returns: mapped MSI RID on success, input requester ID otherwise |
| */ |
| u32 iort_msi_map_rid(struct device *dev, u32 req_id) |
| { |
| struct acpi_iort_node *node; |
| u32 dev_id; |
| |
| node = iort_find_dev_node(dev); |
| if (!node) |
| return req_id; |
| |
| iort_node_map_id(node, req_id, &dev_id, IORT_MSI_TYPE); |
| return dev_id; |
| } |
| |
| /** |
| * iort_pmsi_get_dev_id() - Get the device id for a device |
| * @dev: The device for which the mapping is to be done. |
| * @dev_id: The device ID found. |
| * |
| * Returns: 0 for successful find a dev id, -ENODEV on error |
| */ |
| int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id) |
| { |
| int i, index; |
| struct acpi_iort_node *node; |
| |
| node = iort_find_dev_node(dev); |
| if (!node) |
| return -ENODEV; |
| |
| index = iort_get_id_mapping_index(node); |
| /* if there is a valid index, go get the dev_id directly */ |
| if (index >= 0) { |
| if (iort_node_get_id(node, dev_id, index)) |
| return 0; |
| } else { |
| for (i = 0; i < node->mapping_count; i++) { |
| if (iort_node_map_platform_id(node, dev_id, |
| IORT_MSI_TYPE, i)) |
| return 0; |
| } |
| } |
| |
| return -ENODEV; |
| } |
| |
| static int __maybe_unused iort_find_its_base(u32 its_id, phys_addr_t *base) |
| { |
| struct iort_its_msi_chip *its_msi_chip; |
| int ret = -ENODEV; |
| |
| spin_lock(&iort_msi_chip_lock); |
| list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { |
| if (its_msi_chip->translation_id == its_id) { |
| *base = its_msi_chip->base_addr; |
| ret = 0; |
| break; |
| } |
| } |
| spin_unlock(&iort_msi_chip_lock); |
| |
| return ret; |
| } |
| |
| /** |
| * iort_dev_find_its_id() - Find the ITS identifier for a device |
| * @dev: The device. |
| * @req_id: Device's requester ID |
| * @idx: Index of the ITS identifier list. |
| * @its_id: ITS identifier. |
| * |
| * Returns: 0 on success, appropriate error value otherwise |
| */ |
| static int iort_dev_find_its_id(struct device *dev, u32 req_id, |
| unsigned int idx, int *its_id) |
| { |
| struct acpi_iort_its_group *its; |
| struct acpi_iort_node *node; |
| |
| node = iort_find_dev_node(dev); |
| if (!node) |
| return -ENXIO; |
| |
| node = iort_node_map_id(node, req_id, NULL, IORT_MSI_TYPE); |
| if (!node) |
| return -ENXIO; |
| |
| /* Move to ITS specific data */ |
| its = (struct acpi_iort_its_group *)node->node_data; |
| if (idx >= its->its_count) { |
| dev_err(dev, "requested ITS ID index [%d] overruns ITS entries [%d]\n", |
| idx, its->its_count); |
| return -ENXIO; |
| } |
| |
| *its_id = its->identifiers[idx]; |
| return 0; |
| } |
| |
| /** |
| * iort_get_device_domain() - Find MSI domain related to a device |
| * @dev: The device. |
| * @req_id: Requester ID for the device. |
| * |
| * Returns: the MSI domain for this device, NULL otherwise |
| */ |
| struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id) |
| { |
| struct fwnode_handle *handle; |
| int its_id; |
| |
| if (iort_dev_find_its_id(dev, req_id, 0, &its_id)) |
| return NULL; |
| |
| handle = iort_find_domain_token(its_id); |
| if (!handle) |
| return NULL; |
| |
| return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); |
| } |
| |
| static void iort_set_device_domain(struct device *dev, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_its_group *its; |
| struct acpi_iort_node *msi_parent; |
| struct acpi_iort_id_mapping *map; |
| struct fwnode_handle *iort_fwnode; |
| struct irq_domain *domain; |
| int index; |
| |
| index = iort_get_id_mapping_index(node); |
| if (index < 0) |
| return; |
| |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, |
| node->mapping_offset + index * sizeof(*map)); |
| |
| /* Firmware bug! */ |
| if (!map->output_reference || |
| !(map->flags & ACPI_IORT_ID_SINGLE_MAPPING)) { |
| pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", |
| node, node->type); |
| return; |
| } |
| |
| msi_parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, |
| map->output_reference); |
| |
| if (!msi_parent || msi_parent->type != ACPI_IORT_NODE_ITS_GROUP) |
| return; |
| |
| /* Move to ITS specific data */ |
| its = (struct acpi_iort_its_group *)msi_parent->node_data; |
| |
| iort_fwnode = iort_find_domain_token(its->identifiers[0]); |
| if (!iort_fwnode) |
| return; |
| |
| domain = irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); |
| if (domain) |
| dev_set_msi_domain(dev, domain); |
| } |
| |
| /** |
| * iort_get_platform_device_domain() - Find MSI domain related to a |
| * platform device |
| * @dev: the dev pointer associated with the platform device |
| * |
| * Returns: the MSI domain for this device, NULL otherwise |
| */ |
| static struct irq_domain *iort_get_platform_device_domain(struct device *dev) |
| { |
| struct acpi_iort_node *node, *msi_parent = NULL; |
| struct fwnode_handle *iort_fwnode; |
| struct acpi_iort_its_group *its; |
| int i; |
| |
| /* find its associated iort node */ |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, |
| iort_match_node_callback, dev); |
| if (!node) |
| return NULL; |
| |
| /* then find its msi parent node */ |
| for (i = 0; i < node->mapping_count; i++) { |
| msi_parent = iort_node_map_platform_id(node, NULL, |
| IORT_MSI_TYPE, i); |
| if (msi_parent) |
| break; |
| } |
| |
| if (!msi_parent) |
| return NULL; |
| |
| /* Move to ITS specific data */ |
| its = (struct acpi_iort_its_group *)msi_parent->node_data; |
| |
| iort_fwnode = iort_find_domain_token(its->identifiers[0]); |
| if (!iort_fwnode) |
| return NULL; |
| |
| return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); |
| } |
| |
| void acpi_configure_pmsi_domain(struct device *dev) |
| { |
| struct irq_domain *msi_domain; |
| |
| msi_domain = iort_get_platform_device_domain(dev); |
| if (msi_domain) |
| dev_set_msi_domain(dev, msi_domain); |
| } |
| |
| static int __maybe_unused __get_pci_rid(struct pci_dev *pdev, u16 alias, |
| void *data) |
| { |
| u32 *rid = data; |
| |
| *rid = alias; |
| return 0; |
| } |
| |
| #ifdef CONFIG_IOMMU_API |
| static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev) |
| { |
| struct acpi_iort_node *iommu; |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); |
| |
| iommu = iort_get_iort_node(fwspec->iommu_fwnode); |
| |
| if (iommu && (iommu->type == ACPI_IORT_NODE_SMMU_V3)) { |
| struct acpi_iort_smmu_v3 *smmu; |
| |
| smmu = (struct acpi_iort_smmu_v3 *)iommu->node_data; |
| if (smmu->model == ACPI_IORT_SMMU_V3_HISILICON_HI161X) |
| return iommu; |
| } |
| |
| return NULL; |
| } |
| |
| static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) |
| { |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); |
| |
| return (fwspec && fwspec->ops) ? fwspec->ops : NULL; |
| } |
| |
| static inline int iort_add_device_replay(const struct iommu_ops *ops, |
| struct device *dev) |
| { |
| int err = 0; |
| |
| if (dev->bus && !device_iommu_mapped(dev)) |
| err = iommu_probe_device(dev); |
| |
| return err; |
| } |
| |
| /** |
| * iort_iommu_msi_get_resv_regions - Reserved region driver helper |
| * @dev: Device from iommu_get_resv_regions() |
| * @head: Reserved region list from iommu_get_resv_regions() |
| * |
| * Returns: Number of msi reserved regions on success (0 if platform |
| * doesn't require the reservation or no associated msi regions), |
| * appropriate error value otherwise. The ITS interrupt translation |
| * spaces (ITS_base + SZ_64K, SZ_64K) associated with the device |
| * are the msi reserved regions. |
| */ |
| int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) |
| { |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); |
| struct acpi_iort_its_group *its; |
| struct acpi_iort_node *iommu_node, *its_node = NULL; |
| int i, resv = 0; |
| |
| iommu_node = iort_get_msi_resv_iommu(dev); |
| if (!iommu_node) |
| return 0; |
| |
| /* |
| * Current logic to reserve ITS regions relies on HW topologies |
| * where a given PCI or named component maps its IDs to only one |
| * ITS group; if a PCI or named component can map its IDs to |
| * different ITS groups through IORT mappings this function has |
| * to be reworked to ensure we reserve regions for all ITS groups |
| * a given PCI or named component may map IDs to. |
| */ |
| |
| for (i = 0; i < fwspec->num_ids; i++) { |
| its_node = iort_node_map_id(iommu_node, |
| fwspec->ids[i], |
| NULL, IORT_MSI_TYPE); |
| if (its_node) |
| break; |
| } |
| |
| if (!its_node) |
| return 0; |
| |
| /* Move to ITS specific data */ |
| its = (struct acpi_iort_its_group *)its_node->node_data; |
| |
| for (i = 0; i < its->its_count; i++) { |
| phys_addr_t base; |
| |
| if (!iort_find_its_base(its->identifiers[i], &base)) { |
| int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO; |
| struct iommu_resv_region *region; |
| |
| region = iommu_alloc_resv_region(base + SZ_64K, SZ_64K, |
| prot, IOMMU_RESV_MSI); |
| if (region) { |
| list_add_tail(®ion->list, head); |
| resv++; |
| } |
| } |
| } |
| |
| return (resv == its->its_count) ? resv : -ENODEV; |
| } |
| |
| static inline bool iort_iommu_driver_enabled(u8 type) |
| { |
| switch (type) { |
| case ACPI_IORT_NODE_SMMU_V3: |
| return IS_BUILTIN(CONFIG_ARM_SMMU_V3); |
| case ACPI_IORT_NODE_SMMU: |
| return IS_BUILTIN(CONFIG_ARM_SMMU); |
| default: |
| pr_warn("IORT node type %u does not describe an SMMU\n", type); |
| return false; |
| } |
| } |
| |
| static int arm_smmu_iort_xlate(struct device *dev, u32 streamid, |
| struct fwnode_handle *fwnode, |
| const struct iommu_ops *ops) |
| { |
| int ret = iommu_fwspec_init(dev, fwnode, ops); |
| |
| if (!ret) |
| ret = iommu_fwspec_add_ids(dev, &streamid, 1); |
| |
| return ret; |
| } |
| |
| static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node) |
| { |
| struct acpi_iort_root_complex *pci_rc; |
| |
| pci_rc = (struct acpi_iort_root_complex *)node->node_data; |
| return pci_rc->ats_attribute & ACPI_IORT_ATS_SUPPORTED; |
| } |
| |
| static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node, |
| u32 streamid) |
| { |
| const struct iommu_ops *ops; |
| struct fwnode_handle *iort_fwnode; |
| |
| if (!node) |
| return -ENODEV; |
| |
| iort_fwnode = iort_get_fwnode(node); |
| if (!iort_fwnode) |
| return -ENODEV; |
| |
| /* |
| * If the ops look-up fails, this means that either |
| * the SMMU drivers have not been probed yet or that |
| * the SMMU drivers are not built in the kernel; |
| * Depending on whether the SMMU drivers are built-in |
| * in the kernel or not, defer the IOMMU configuration |
| * or just abort it. |
| */ |
| ops = iommu_ops_from_fwnode(iort_fwnode); |
| if (!ops) |
| return iort_iommu_driver_enabled(node->type) ? |
| -EPROBE_DEFER : -ENODEV; |
| |
| return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops); |
| } |
| |
| struct iort_pci_alias_info { |
| struct device *dev; |
| struct acpi_iort_node *node; |
| }; |
| |
| static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data) |
| { |
| struct iort_pci_alias_info *info = data; |
| struct acpi_iort_node *parent; |
| u32 streamid; |
| |
| parent = iort_node_map_id(info->node, alias, &streamid, |
| IORT_IOMMU_TYPE); |
| return iort_iommu_xlate(info->dev, parent, streamid); |
| } |
| |
| /** |
| * iort_iommu_configure - Set-up IOMMU configuration for a device. |
| * |
| * @dev: device to configure |
| * |
| * Returns: iommu_ops pointer on configuration success |
| * NULL on configuration failure |
| */ |
| const struct iommu_ops *iort_iommu_configure(struct device *dev) |
| { |
| struct acpi_iort_node *node, *parent; |
| const struct iommu_ops *ops; |
| u32 streamid = 0; |
| int err = -ENODEV; |
| |
| /* |
| * If we already translated the fwspec there |
| * is nothing left to do, return the iommu_ops. |
| */ |
| ops = iort_fwspec_iommu_ops(dev); |
| if (ops) |
| return ops; |
| |
| if (dev_is_pci(dev)) { |
| struct pci_bus *bus = to_pci_dev(dev)->bus; |
| struct iort_pci_alias_info info = { .dev = dev }; |
| |
| node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, |
| iort_match_node_callback, &bus->dev); |
| if (!node) |
| return NULL; |
| |
| info.node = node; |
| err = pci_for_each_dma_alias(to_pci_dev(dev), |
| iort_pci_iommu_init, &info); |
| |
| if (!err && iort_pci_rc_supports_ats(node)) |
| dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS; |
| } else { |
| int i = 0; |
| |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, |
| iort_match_node_callback, dev); |
| if (!node) |
| return NULL; |
| |
| do { |
| parent = iort_node_map_platform_id(node, &streamid, |
| IORT_IOMMU_TYPE, |
| i++); |
| |
| if (parent) |
| err = iort_iommu_xlate(dev, parent, streamid); |
| } while (parent && !err); |
| } |
| |
| /* |
| * If we have reason to believe the IOMMU driver missed the initial |
| * add_device callback for dev, replay it to get things in order. |
| */ |
| if (!err) { |
| ops = iort_fwspec_iommu_ops(dev); |
| err = iort_add_device_replay(ops, dev); |
| } |
| |
| /* Ignore all other errors apart from EPROBE_DEFER */ |
| if (err == -EPROBE_DEFER) { |
| ops = ERR_PTR(err); |
| } else if (err) { |
| dev_dbg(dev, "Adding to IOMMU failed: %d\n", err); |
| ops = NULL; |
| } |
| |
| return ops; |
| } |
| #else |
| static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) |
| { return NULL; } |
| static inline int iort_add_device_replay(const struct iommu_ops *ops, |
| struct device *dev) |
| { return 0; } |
| int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) |
| { return 0; } |
| const struct iommu_ops *iort_iommu_configure(struct device *dev) |
| { return NULL; } |
| #endif |
| |
| static int nc_dma_get_range(struct device *dev, u64 *size) |
| { |
| struct acpi_iort_node *node; |
| struct acpi_iort_named_component *ncomp; |
| |
| node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT, |
| iort_match_node_callback, dev); |
| if (!node) |
| return -ENODEV; |
| |
| ncomp = (struct acpi_iort_named_component *)node->node_data; |
| |
| *size = ncomp->memory_address_limit >= 64 ? U64_MAX : |
| 1ULL<<ncomp->memory_address_limit; |
| |
| return 0; |
| } |
| |
| static int rc_dma_get_range(struct device *dev, u64 *size) |
| { |
| struct acpi_iort_node *node; |
| struct acpi_iort_root_complex *rc; |
| struct pci_bus *pbus = to_pci_dev(dev)->bus; |
| |
| node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, |
| iort_match_node_callback, &pbus->dev); |
| if (!node || node->revision < 1) |
| return -ENODEV; |
| |
| rc = (struct acpi_iort_root_complex *)node->node_data; |
| |
| *size = rc->memory_address_limit >= 64 ? U64_MAX : |
| 1ULL<<rc->memory_address_limit; |
| |
| return 0; |
| } |
| |
| /** |
| * iort_dma_setup() - Set-up device DMA parameters. |
| * |
| * @dev: device to configure |
| * @dma_addr: device DMA address result pointer |
| * @size: DMA range size result pointer |
| */ |
| void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) |
| { |
| u64 mask, dmaaddr = 0, size = 0, offset = 0; |
| int ret, msb; |
| |
| /* |
| * If @dev is expected to be DMA-capable then the bus code that created |
| * it should have initialised its dma_mask pointer by this point. For |
| * now, we'll continue the legacy behaviour of coercing it to the |
| * coherent mask if not, but we'll no longer do so quietly. |
| */ |
| if (!dev->dma_mask) { |
| dev_warn(dev, "DMA mask not set\n"); |
| dev->dma_mask = &dev->coherent_dma_mask; |
| } |
| |
| if (dev->coherent_dma_mask) |
| size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); |
| else |
| size = 1ULL << 32; |
| |
| if (dev_is_pci(dev)) { |
| ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size); |
| if (ret == -ENODEV) |
| ret = rc_dma_get_range(dev, &size); |
| } else { |
| ret = nc_dma_get_range(dev, &size); |
| } |
| |
| if (!ret) { |
| msb = fls64(dmaaddr + size - 1); |
| /* |
| * Round-up to the power-of-two mask or set |
| * the mask to the whole 64-bit address space |
| * in case the DMA region covers the full |
| * memory window. |
| */ |
| mask = msb == 64 ? U64_MAX : (1ULL << msb) - 1; |
| /* |
| * Limit coherent and dma mask based on size |
| * retrieved from firmware. |
| */ |
| dev->bus_dma_mask = mask; |
| dev->coherent_dma_mask = mask; |
| *dev->dma_mask = mask; |
| } |
| |
| *dma_addr = dmaaddr; |
| *dma_size = size; |
| |
| dev->dma_pfn_offset = PFN_DOWN(offset); |
| dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset); |
| } |
| |
| static void __init acpi_iort_register_irq(int hwirq, const char *name, |
| int trigger, |
| struct resource *res) |
| { |
| int irq = acpi_register_gsi(NULL, hwirq, trigger, |
| ACPI_ACTIVE_HIGH); |
| |
| if (irq <= 0) { |
| pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, |
| name); |
| return; |
| } |
| |
| res->start = irq; |
| res->end = irq; |
| res->flags = IORESOURCE_IRQ; |
| res->name = name; |
| } |
| |
| static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu_v3 *smmu; |
| /* Always present mem resource */ |
| int num_res = 1; |
| |
| /* Retrieve SMMUv3 specific data */ |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; |
| |
| if (smmu->event_gsiv) |
| num_res++; |
| |
| if (smmu->pri_gsiv) |
| num_res++; |
| |
| if (smmu->gerr_gsiv) |
| num_res++; |
| |
| if (smmu->sync_gsiv) |
| num_res++; |
| |
| return num_res; |
| } |
| |
| static bool arm_smmu_v3_is_combined_irq(struct acpi_iort_smmu_v3 *smmu) |
| { |
| /* |
| * Cavium ThunderX2 implementation doesn't not support unique |
| * irq line. Use single irq line for all the SMMUv3 interrupts. |
| */ |
| if (smmu->model != ACPI_IORT_SMMU_V3_CAVIUM_CN99XX) |
| return false; |
| |
| /* |
| * ThunderX2 doesn't support MSIs from the SMMU, so we're checking |
| * SPI numbers here. |
| */ |
| return smmu->event_gsiv == smmu->pri_gsiv && |
| smmu->event_gsiv == smmu->gerr_gsiv && |
| smmu->event_gsiv == smmu->sync_gsiv; |
| } |
| |
| static unsigned long arm_smmu_v3_resource_size(struct acpi_iort_smmu_v3 *smmu) |
| { |
| /* |
| * Override the size, for Cavium ThunderX2 implementation |
| * which doesn't support the page 1 SMMU register space. |
| */ |
| if (smmu->model == ACPI_IORT_SMMU_V3_CAVIUM_CN99XX) |
| return SZ_64K; |
| |
| return SZ_128K; |
| } |
| |
| static void __init arm_smmu_v3_init_resources(struct resource *res, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu_v3 *smmu; |
| int num_res = 0; |
| |
| /* Retrieve SMMUv3 specific data */ |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; |
| |
| res[num_res].start = smmu->base_address; |
| res[num_res].end = smmu->base_address + |
| arm_smmu_v3_resource_size(smmu) - 1; |
| res[num_res].flags = IORESOURCE_MEM; |
| |
| num_res++; |
| if (arm_smmu_v3_is_combined_irq(smmu)) { |
| if (smmu->event_gsiv) |
| acpi_iort_register_irq(smmu->event_gsiv, "combined", |
| ACPI_EDGE_SENSITIVE, |
| &res[num_res++]); |
| } else { |
| |
| if (smmu->event_gsiv) |
| acpi_iort_register_irq(smmu->event_gsiv, "eventq", |
| ACPI_EDGE_SENSITIVE, |
| &res[num_res++]); |
| |
| if (smmu->pri_gsiv) |
| acpi_iort_register_irq(smmu->pri_gsiv, "priq", |
| ACPI_EDGE_SENSITIVE, |
| &res[num_res++]); |
| |
| if (smmu->gerr_gsiv) |
| acpi_iort_register_irq(smmu->gerr_gsiv, "gerror", |
| ACPI_EDGE_SENSITIVE, |
| &res[num_res++]); |
| |
| if (smmu->sync_gsiv) |
| acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync", |
| ACPI_EDGE_SENSITIVE, |
| &res[num_res++]); |
| } |
| } |
| |
| static void __init arm_smmu_v3_dma_configure(struct device *dev, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu_v3 *smmu; |
| enum dev_dma_attr attr; |
| |
| /* Retrieve SMMUv3 specific data */ |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; |
| |
| attr = (smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE) ? |
| DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT; |
| |
| /* We expect the dma masks to be equivalent for all SMMUv3 set-ups */ |
| dev->dma_mask = &dev->coherent_dma_mask; |
| |
| /* Configure DMA for the page table walker */ |
| acpi_dma_configure(dev, attr); |
| } |
| |
| #if defined(CONFIG_ACPI_NUMA) |
| /* |
| * set numa proximity domain for smmuv3 device |
| */ |
| static int __init arm_smmu_v3_set_proximity(struct device *dev, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu_v3 *smmu; |
| |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; |
| if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { |
| int node = acpi_map_pxm_to_node(smmu->pxm); |
| |
| if (node != NUMA_NO_NODE && !node_online(node)) |
| return -EINVAL; |
| |
| set_dev_node(dev, node); |
| pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", |
| smmu->base_address, |
| smmu->pxm); |
| } |
| return 0; |
| } |
| #else |
| #define arm_smmu_v3_set_proximity NULL |
| #endif |
| |
| static int __init arm_smmu_count_resources(struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu *smmu; |
| |
| /* Retrieve SMMU specific data */ |
| smmu = (struct acpi_iort_smmu *)node->node_data; |
| |
| /* |
| * Only consider the global fault interrupt and ignore the |
| * configuration access interrupt. |
| * |
| * MMIO address and global fault interrupt resources are always |
| * present so add them to the context interrupt count as a static |
| * value. |
| */ |
| return smmu->context_interrupt_count + 2; |
| } |
| |
| static void __init arm_smmu_init_resources(struct resource *res, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu *smmu; |
| int i, hw_irq, trigger, num_res = 0; |
| u64 *ctx_irq, *glb_irq; |
| |
| /* Retrieve SMMU specific data */ |
| smmu = (struct acpi_iort_smmu *)node->node_data; |
| |
| res[num_res].start = smmu->base_address; |
| res[num_res].end = smmu->base_address + smmu->span - 1; |
| res[num_res].flags = IORESOURCE_MEM; |
| num_res++; |
| |
| glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset); |
| /* Global IRQs */ |
| hw_irq = IORT_IRQ_MASK(glb_irq[0]); |
| trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[0]); |
| |
| acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger, |
| &res[num_res++]); |
| |
| /* Context IRQs */ |
| ctx_irq = ACPI_ADD_PTR(u64, node, smmu->context_interrupt_offset); |
| for (i = 0; i < smmu->context_interrupt_count; i++) { |
| hw_irq = IORT_IRQ_MASK(ctx_irq[i]); |
| trigger = IORT_IRQ_TRIGGER_MASK(ctx_irq[i]); |
| |
| acpi_iort_register_irq(hw_irq, "arm-smmu-context", trigger, |
| &res[num_res++]); |
| } |
| } |
| |
| static void __init arm_smmu_dma_configure(struct device *dev, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_smmu *smmu; |
| enum dev_dma_attr attr; |
| |
| /* Retrieve SMMU specific data */ |
| smmu = (struct acpi_iort_smmu *)node->node_data; |
| |
| attr = (smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK) ? |
| DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT; |
| |
| /* We expect the dma masks to be equivalent for SMMU set-ups */ |
| dev->dma_mask = &dev->coherent_dma_mask; |
| |
| /* Configure DMA for the page table walker */ |
| acpi_dma_configure(dev, attr); |
| } |
| |
| static int __init arm_smmu_v3_pmcg_count_resources(struct acpi_iort_node *node) |
| { |
| struct acpi_iort_pmcg *pmcg; |
| |
| /* Retrieve PMCG specific data */ |
| pmcg = (struct acpi_iort_pmcg *)node->node_data; |
| |
| /* |
| * There are always 2 memory resources. |
| * If the overflow_gsiv is present then add that for a total of 3. |
| */ |
| return pmcg->overflow_gsiv ? 3 : 2; |
| } |
| |
| static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res, |
| struct acpi_iort_node *node) |
| { |
| struct acpi_iort_pmcg *pmcg; |
| |
| /* Retrieve PMCG specific data */ |
| pmcg = (struct acpi_iort_pmcg *)node->node_data; |
| |
| res[0].start = pmcg->page0_base_address; |
| res[0].end = pmcg->page0_base_address + SZ_4K - 1; |
| res[0].flags = IORESOURCE_MEM; |
| res[1].start = pmcg->page1_base_address; |
| res[1].end = pmcg->page1_base_address + SZ_4K - 1; |
| res[1].flags = IORESOURCE_MEM; |
| |
| if (pmcg->overflow_gsiv) |
| acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow", |
| ACPI_EDGE_SENSITIVE, &res[2]); |
| } |
| |
| static struct acpi_platform_list pmcg_plat_info[] __initdata = { |
| /* HiSilicon Hip08 Platform */ |
| {"HISI ", "HIP08 ", 0, ACPI_SIG_IORT, greater_than_or_equal, |
| "Erratum #162001800", IORT_SMMU_V3_PMCG_HISI_HIP08}, |
| { } |
| }; |
| |
| static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev) |
| { |
| u32 model; |
| int idx; |
| |
| idx = acpi_match_platform_list(pmcg_plat_info); |
| if (idx >= 0) |
| model = pmcg_plat_info[idx].data; |
| else |
| model = IORT_SMMU_V3_PMCG_GENERIC; |
| |
| return platform_device_add_data(pdev, &model, sizeof(model)); |
| } |
| |
| struct iort_dev_config { |
| const char *name; |
| int (*dev_init)(struct acpi_iort_node *node); |
| void (*dev_dma_configure)(struct device *dev, |
| struct acpi_iort_node *node); |
| int (*dev_count_resources)(struct acpi_iort_node *node); |
| void (*dev_init_resources)(struct resource *res, |
| struct acpi_iort_node *node); |
| int (*dev_set_proximity)(struct device *dev, |
| struct acpi_iort_node *node); |
| int (*dev_add_platdata)(struct platform_device *pdev); |
| }; |
| |
| static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = { |
| .name = "arm-smmu-v3", |
| .dev_dma_configure = arm_smmu_v3_dma_configure, |
| .dev_count_resources = arm_smmu_v3_count_resources, |
| .dev_init_resources = arm_smmu_v3_init_resources, |
| .dev_set_proximity = arm_smmu_v3_set_proximity, |
| }; |
| |
| static const struct iort_dev_config iort_arm_smmu_cfg __initconst = { |
| .name = "arm-smmu", |
| .dev_dma_configure = arm_smmu_dma_configure, |
| .dev_count_resources = arm_smmu_count_resources, |
| .dev_init_resources = arm_smmu_init_resources, |
| }; |
| |
| static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = { |
| .name = "arm-smmu-v3-pmcg", |
| .dev_count_resources = arm_smmu_v3_pmcg_count_resources, |
| .dev_init_resources = arm_smmu_v3_pmcg_init_resources, |
| .dev_add_platdata = arm_smmu_v3_pmcg_add_platdata, |
| }; |
| |
| static __init const struct iort_dev_config *iort_get_dev_cfg( |
| struct acpi_iort_node *node) |
| { |
| switch (node->type) { |
| case ACPI_IORT_NODE_SMMU_V3: |
| return &iort_arm_smmu_v3_cfg; |
| case ACPI_IORT_NODE_SMMU: |
| return &iort_arm_smmu_cfg; |
| case ACPI_IORT_NODE_PMCG: |
| return &iort_arm_smmu_v3_pmcg_cfg; |
| default: |
| return NULL; |
| } |
| } |
| |
| /** |
| * iort_add_platform_device() - Allocate a platform device for IORT node |
| * @node: Pointer to device ACPI IORT node |
| * |
| * Returns: 0 on success, <0 failure |
| */ |
| static int __init iort_add_platform_device(struct acpi_iort_node *node, |
| const struct iort_dev_config *ops) |
| { |
| struct fwnode_handle *fwnode; |
| struct platform_device *pdev; |
| struct resource *r; |
| int ret, count; |
| |
| pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO); |
| if (!pdev) |
| return -ENOMEM; |
| |
| if (ops->dev_set_proximity) { |
| ret = ops->dev_set_proximity(&pdev->dev, node); |
| if (ret) |
| goto dev_put; |
| } |
| |
| count = ops->dev_count_resources(node); |
| |
| r = kcalloc(count, sizeof(*r), GFP_KERNEL); |
| if (!r) { |
| ret = -ENOMEM; |
| goto dev_put; |
| } |
| |
| ops->dev_init_resources(r, node); |
| |
| ret = platform_device_add_resources(pdev, r, count); |
| /* |
| * Resources are duplicated in platform_device_add_resources, |
| * free their allocated memory |
| */ |
| kfree(r); |
| |
| if (ret) |
| goto dev_put; |
| |
| /* |
| * Platform devices based on PMCG nodes uses platform_data to |
| * pass the hardware model info to the driver. For others, add |
| * a copy of IORT node pointer to platform_data to be used to |
| * retrieve IORT data information. |
| */ |
| if (ops->dev_add_platdata) |
| ret = ops->dev_add_platdata(pdev); |
| else |
| ret = platform_device_add_data(pdev, &node, sizeof(node)); |
| |
| if (ret) |
| goto dev_put; |
| |
| fwnode = iort_get_fwnode(node); |
| |
| if (!fwnode) { |
| ret = -ENODEV; |
| goto dev_put; |
| } |
| |
| pdev->dev.fwnode = fwnode; |
| |
| if (ops->dev_dma_configure) |
| ops->dev_dma_configure(&pdev->dev, node); |
| |
| iort_set_device_domain(&pdev->dev, node); |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| goto dma_deconfigure; |
| |
| return 0; |
| |
| dma_deconfigure: |
| arch_teardown_dma_ops(&pdev->dev); |
| dev_put: |
| platform_device_put(pdev); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PCI |
| static void __init iort_enable_acs(struct acpi_iort_node *iort_node) |
| { |
| static bool acs_enabled __initdata; |
| |
| if (acs_enabled) |
| return; |
| |
| if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { |
| struct acpi_iort_node *parent; |
| struct acpi_iort_id_mapping *map; |
| int i; |
| |
| map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, iort_node, |
| iort_node->mapping_offset); |
| |
| for (i = 0; i < iort_node->mapping_count; i++, map++) { |
| if (!map->output_reference) |
| continue; |
| |
| parent = ACPI_ADD_PTR(struct acpi_iort_node, |
| iort_table, map->output_reference); |
| /* |
| * If we detect a RC->SMMU mapping, make sure |
| * we enable ACS on the system. |
| */ |
| if ((parent->type == ACPI_IORT_NODE_SMMU) || |
| (parent->type == ACPI_IORT_NODE_SMMU_V3)) { |
| pci_request_acs(); |
| acs_enabled = true; |
| return; |
| } |
| } |
| } |
| } |
| #else |
| static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { } |
| #endif |
| |
| static void __init iort_init_platform_devices(void) |
| { |
| struct acpi_iort_node *iort_node, *iort_end; |
| struct acpi_table_iort *iort; |
| struct fwnode_handle *fwnode; |
| int i, ret; |
| const struct iort_dev_config *ops; |
| |
| /* |
| * iort_table and iort both point to the start of IORT table, but |
| * have different struct types |
| */ |
| iort = (struct acpi_table_iort *)iort_table; |
| |
| /* Get the first IORT node */ |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, |
| iort->node_offset); |
| iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort, |
| iort_table->length); |
| |
| for (i = 0; i < iort->node_count; i++) { |
| if (iort_node >= iort_end) { |
| pr_err("iort node pointer overflows, bad table\n"); |
| return; |
| } |
| |
| iort_enable_acs(iort_node); |
| |
| ops = iort_get_dev_cfg(iort_node); |
| if (ops) { |
| fwnode = acpi_alloc_fwnode_static(); |
| if (!fwnode) |
| return; |
| |
| iort_set_fwnode(iort_node, fwnode); |
| |
| ret = iort_add_platform_device(iort_node, ops); |
| if (ret) { |
| iort_delete_fwnode(iort_node); |
| acpi_free_fwnode_static(fwnode); |
| return; |
| } |
| } |
| |
| iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, |
| iort_node->length); |
| } |
| } |
| |
| void __init acpi_iort_init(void) |
| { |
| acpi_status status; |
| |
| status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); |
| if (ACPI_FAILURE(status)) { |
| if (status != AE_NOT_FOUND) { |
| const char *msg = acpi_format_exception(status); |
| |
| pr_err("Failed to get table, %s\n", msg); |
| } |
| |
| return; |
| } |
| |
| iort_init_platform_devices(); |
| } |