| /* |
| * Copyright 2016 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| #include <linux/delay.h> |
| |
| #include "dm_services.h" |
| #include "dm_helpers.h" |
| #include "core_types.h" |
| #include "resource.h" |
| #include "dcn20/dcn20_resource.h" |
| #include "dce110/dce110_hw_sequencer.h" |
| #include "dcn10/dcn10_hw_sequencer.h" |
| #include "dcn20_hwseq.h" |
| #include "dce/dce_hwseq.h" |
| #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT |
| #include "dcn20/dcn20_dsc.h" |
| #endif |
| #include "abm.h" |
| #include "clk_mgr.h" |
| #include "dmcu.h" |
| #include "hubp.h" |
| #include "timing_generator.h" |
| #include "opp.h" |
| #include "ipp.h" |
| #include "mpc.h" |
| #include "mcif_wb.h" |
| #include "reg_helper.h" |
| #include "dcn10/dcn10_cm_common.h" |
| #include "dcn10/dcn10_hubbub.h" |
| #include "dcn10/dcn10_optc.h" |
| #include "dc_link_dp.h" |
| #include "vm_helper.h" |
| #include "dccg.h" |
| |
| #define DC_LOGGER_INIT(logger) |
| |
| #define CTX \ |
| hws->ctx |
| #define REG(reg)\ |
| hws->regs->reg |
| |
| #undef FN |
| #define FN(reg_name, field_name) \ |
| hws->shifts->field_name, hws->masks->field_name |
| |
| static void bios_golden_init(struct dc *dc) |
| { |
| struct dc_bios *bp = dc->ctx->dc_bios; |
| int i; |
| |
| /* initialize dcn global */ |
| bp->funcs->enable_disp_power_gating(bp, |
| CONTROLLER_ID_D0, ASIC_PIPE_INIT); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| /* initialize dcn per pipe */ |
| bp->funcs->enable_disp_power_gating(bp, |
| CONTROLLER_ID_D0 + i, ASIC_PIPE_DISABLE); |
| } |
| } |
| |
| static void enable_power_gating_plane( |
| struct dce_hwseq *hws, |
| bool enable) |
| { |
| bool force_on = 1; /* disable power gating */ |
| |
| if (enable) |
| force_on = 0; |
| |
| /* DCHUBP0/1/2/3/4/5 */ |
| REG_UPDATE(DOMAIN0_PG_CONFIG, DOMAIN0_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN2_PG_CONFIG, DOMAIN2_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN4_PG_CONFIG, DOMAIN4_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN6_PG_CONFIG, DOMAIN6_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN8_PG_CONFIG, DOMAIN8_POWER_FORCEON, force_on); |
| /*Do not power gate DCHUB5, should be left at HW default, power on permanently*/ |
| /*REG_UPDATE(DOMAIN10_PG_CONFIG, DOMAIN10_POWER_FORCEON, force_on);*/ |
| |
| /* DPP0/1/2/3/4/5 */ |
| REG_UPDATE(DOMAIN1_PG_CONFIG, DOMAIN1_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN3_PG_CONFIG, DOMAIN3_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN5_PG_CONFIG, DOMAIN5_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN7_PG_CONFIG, DOMAIN7_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN9_PG_CONFIG, DOMAIN9_POWER_FORCEON, force_on); |
| /*Do not power gate DPP5, should be left at HW default, power on permanently*/ |
| /*REG_UPDATE(DOMAIN11_PG_CONFIG, DOMAIN11_POWER_FORCEON, force_on);*/ |
| |
| REG_UPDATE(DOMAIN16_PG_CONFIG, DOMAIN16_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN17_PG_CONFIG, DOMAIN17_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN18_PG_CONFIG, DOMAIN18_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN19_PG_CONFIG, DOMAIN19_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN20_PG_CONFIG, DOMAIN20_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN21_PG_CONFIG, DOMAIN21_POWER_FORCEON, force_on); |
| } |
| |
| static void dcn20_dccg_init(struct dce_hwseq *hws) |
| { |
| /* |
| * set MICROSECOND_TIME_BASE_DIV |
| * 100Mhz refclk -> 0x120264 |
| * 27Mhz refclk -> 0x12021b |
| * 48Mhz refclk -> 0x120230 |
| * |
| */ |
| REG_WRITE(MICROSECOND_TIME_BASE_DIV, 0x120264); |
| |
| /* |
| * set MILLISECOND_TIME_BASE_DIV |
| * 100Mhz refclk -> 0x1186a0 |
| * 27Mhz refclk -> 0x106978 |
| * 48Mhz refclk -> 0x10bb80 |
| * |
| */ |
| REG_WRITE(MILLISECOND_TIME_BASE_DIV, 0x1186a0); |
| |
| /* This value is dependent on the hardware pipeline delay so set once per SOC */ |
| REG_WRITE(DISPCLK_FREQ_CHANGE_CNTL, 0x801003c); |
| } |
| |
| static void disable_vga( |
| struct dce_hwseq *hws) |
| { |
| REG_WRITE(D1VGA_CONTROL, 0); |
| REG_WRITE(D2VGA_CONTROL, 0); |
| REG_WRITE(D3VGA_CONTROL, 0); |
| REG_WRITE(D4VGA_CONTROL, 0); |
| REG_WRITE(D5VGA_CONTROL, 0); |
| REG_WRITE(D6VGA_CONTROL, 0); |
| } |
| |
| void dcn20_program_tripleBuffer( |
| const struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| bool enableTripleBuffer) |
| { |
| if (pipe_ctx->plane_res.hubp && pipe_ctx->plane_res.hubp->funcs) { |
| pipe_ctx->plane_res.hubp->funcs->hubp_enable_tripleBuffer( |
| pipe_ctx->plane_res.hubp, |
| enableTripleBuffer); |
| } |
| } |
| |
| /* Blank pixel data during initialization */ |
| static void dcn20_init_blank( |
| struct dc *dc, |
| struct timing_generator *tg) |
| { |
| enum dc_color_space color_space; |
| struct tg_color black_color = {0}; |
| struct output_pixel_processor *opp = NULL; |
| struct output_pixel_processor *bottom_opp = NULL; |
| uint32_t num_opps, opp_id_src0, opp_id_src1; |
| uint32_t otg_active_width, otg_active_height; |
| |
| /* program opp dpg blank color */ |
| color_space = COLOR_SPACE_SRGB; |
| color_space_to_black_color(dc, color_space, &black_color); |
| |
| /* get the OTG active size */ |
| tg->funcs->get_otg_active_size(tg, |
| &otg_active_width, |
| &otg_active_height); |
| |
| /* get the OPTC source */ |
| tg->funcs->get_optc_source(tg, &num_opps, &opp_id_src0, &opp_id_src1); |
| ASSERT(opp_id_src0 < dc->res_pool->res_cap->num_opp); |
| opp = dc->res_pool->opps[opp_id_src0]; |
| |
| if (num_opps == 2) { |
| otg_active_width = otg_active_width / 2; |
| ASSERT(opp_id_src1 < dc->res_pool->res_cap->num_opp); |
| bottom_opp = dc->res_pool->opps[opp_id_src1]; |
| } |
| |
| opp->funcs->opp_set_disp_pattern_generator( |
| opp, |
| CONTROLLER_DP_TEST_PATTERN_SOLID_COLOR, |
| COLOR_DEPTH_UNDEFINED, |
| &black_color, |
| otg_active_width, |
| otg_active_height); |
| |
| if (num_opps == 2) { |
| bottom_opp->funcs->opp_set_disp_pattern_generator( |
| bottom_opp, |
| CONTROLLER_DP_TEST_PATTERN_SOLID_COLOR, |
| COLOR_DEPTH_UNDEFINED, |
| &black_color, |
| otg_active_width, |
| otg_active_height); |
| } |
| |
| dcn20_hwss_wait_for_blank_complete(opp); |
| } |
| |
| #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT |
| static void dcn20_dsc_pg_control( |
| struct dce_hwseq *hws, |
| unsigned int dsc_inst, |
| bool power_on) |
| { |
| uint32_t power_gate = power_on ? 0 : 1; |
| uint32_t pwr_status = power_on ? 0 : 2; |
| uint32_t org_ip_request_cntl = 0; |
| |
| if (hws->ctx->dc->debug.disable_dsc_power_gate) |
| return; |
| |
| if (REG(DOMAIN16_PG_CONFIG) == 0) |
| return; |
| |
| REG_GET(DC_IP_REQUEST_CNTL, IP_REQUEST_EN, &org_ip_request_cntl); |
| if (org_ip_request_cntl == 0) |
| REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 1); |
| |
| switch (dsc_inst) { |
| case 0: /* DSC0 */ |
| REG_UPDATE(DOMAIN16_PG_CONFIG, |
| DOMAIN16_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN16_PG_STATUS, |
| DOMAIN16_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 1: /* DSC1 */ |
| REG_UPDATE(DOMAIN17_PG_CONFIG, |
| DOMAIN17_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN17_PG_STATUS, |
| DOMAIN17_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 2: /* DSC2 */ |
| REG_UPDATE(DOMAIN18_PG_CONFIG, |
| DOMAIN18_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN18_PG_STATUS, |
| DOMAIN18_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 3: /* DSC3 */ |
| REG_UPDATE(DOMAIN19_PG_CONFIG, |
| DOMAIN19_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN19_PG_STATUS, |
| DOMAIN19_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 4: /* DSC4 */ |
| REG_UPDATE(DOMAIN20_PG_CONFIG, |
| DOMAIN20_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN20_PG_STATUS, |
| DOMAIN20_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 5: /* DSC5 */ |
| REG_UPDATE(DOMAIN21_PG_CONFIG, |
| DOMAIN21_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN21_PG_STATUS, |
| DOMAIN21_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| |
| if (org_ip_request_cntl == 0) |
| REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 0); |
| } |
| #endif |
| |
| static void dcn20_dpp_pg_control( |
| struct dce_hwseq *hws, |
| unsigned int dpp_inst, |
| bool power_on) |
| { |
| uint32_t power_gate = power_on ? 0 : 1; |
| uint32_t pwr_status = power_on ? 0 : 2; |
| |
| if (hws->ctx->dc->debug.disable_dpp_power_gate) |
| return; |
| if (REG(DOMAIN1_PG_CONFIG) == 0) |
| return; |
| |
| switch (dpp_inst) { |
| case 0: /* DPP0 */ |
| REG_UPDATE(DOMAIN1_PG_CONFIG, |
| DOMAIN1_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN1_PG_STATUS, |
| DOMAIN1_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 1: /* DPP1 */ |
| REG_UPDATE(DOMAIN3_PG_CONFIG, |
| DOMAIN3_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN3_PG_STATUS, |
| DOMAIN3_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 2: /* DPP2 */ |
| REG_UPDATE(DOMAIN5_PG_CONFIG, |
| DOMAIN5_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN5_PG_STATUS, |
| DOMAIN5_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 3: /* DPP3 */ |
| REG_UPDATE(DOMAIN7_PG_CONFIG, |
| DOMAIN7_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN7_PG_STATUS, |
| DOMAIN7_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 4: /* DPP4 */ |
| REG_UPDATE(DOMAIN9_PG_CONFIG, |
| DOMAIN9_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN9_PG_STATUS, |
| DOMAIN9_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 5: /* DPP5 */ |
| /* |
| * Do not power gate DPP5, should be left at HW default, power on permanently. |
| * PG on Pipe5 is De-featured, attempting to put it to PG state may result in hard |
| * reset. |
| * REG_UPDATE(DOMAIN11_PG_CONFIG, |
| * DOMAIN11_POWER_GATE, power_gate); |
| * |
| * REG_WAIT(DOMAIN11_PG_STATUS, |
| * DOMAIN11_PGFSM_PWR_STATUS, pwr_status, |
| * 1, 1000); |
| */ |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| } |
| |
| |
| static void dcn20_hubp_pg_control( |
| struct dce_hwseq *hws, |
| unsigned int hubp_inst, |
| bool power_on) |
| { |
| uint32_t power_gate = power_on ? 0 : 1; |
| uint32_t pwr_status = power_on ? 0 : 2; |
| |
| if (hws->ctx->dc->debug.disable_hubp_power_gate) |
| return; |
| if (REG(DOMAIN0_PG_CONFIG) == 0) |
| return; |
| |
| switch (hubp_inst) { |
| case 0: /* DCHUBP0 */ |
| REG_UPDATE(DOMAIN0_PG_CONFIG, |
| DOMAIN0_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN0_PG_STATUS, |
| DOMAIN0_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 1: /* DCHUBP1 */ |
| REG_UPDATE(DOMAIN2_PG_CONFIG, |
| DOMAIN2_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN2_PG_STATUS, |
| DOMAIN2_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 2: /* DCHUBP2 */ |
| REG_UPDATE(DOMAIN4_PG_CONFIG, |
| DOMAIN4_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN4_PG_STATUS, |
| DOMAIN4_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 3: /* DCHUBP3 */ |
| REG_UPDATE(DOMAIN6_PG_CONFIG, |
| DOMAIN6_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN6_PG_STATUS, |
| DOMAIN6_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 4: /* DCHUBP4 */ |
| REG_UPDATE(DOMAIN8_PG_CONFIG, |
| DOMAIN8_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN8_PG_STATUS, |
| DOMAIN8_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 5: /* DCHUBP5 */ |
| /* |
| * Do not power gate DCHUB5, should be left at HW default, power on permanently. |
| * PG on Pipe5 is De-featured, attempting to put it to PG state may result in hard |
| * reset. |
| * REG_UPDATE(DOMAIN10_PG_CONFIG, |
| * DOMAIN10_POWER_GATE, power_gate); |
| * |
| * REG_WAIT(DOMAIN10_PG_STATUS, |
| * DOMAIN10_PGFSM_PWR_STATUS, pwr_status, |
| * 1, 1000); |
| */ |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| } |
| |
| |
| |
| static void dcn20_plane_atomic_power_down(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dpp *dpp = pipe_ctx->plane_res.dpp; |
| |
| DC_LOGGER_INIT(dc->ctx->logger); |
| |
| if (REG(DC_IP_REQUEST_CNTL)) { |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| dcn20_dpp_pg_control(hws, dpp->inst, false); |
| dcn20_hubp_pg_control(hws, pipe_ctx->plane_res.hubp->inst, false); |
| dpp->funcs->dpp_reset(dpp); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| DC_LOG_DEBUG( |
| "Power gated front end %d\n", pipe_ctx->pipe_idx); |
| } |
| } |
| |
| |
| |
| /* disable HW used by plane. |
| * note: cannot disable until disconnect is complete |
| */ |
| static void dcn20_plane_atomic_disable(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| struct dpp *dpp = pipe_ctx->plane_res.dpp; |
| |
| dc->hwss.wait_for_mpcc_disconnect(dc, dc->res_pool, pipe_ctx); |
| |
| /* In flip immediate with pipe splitting case GSL is used for |
| * synchronization so we must disable it when the plane is disabled. |
| */ |
| if (pipe_ctx->stream_res.gsl_group != 0) |
| dcn20_setup_gsl_group_as_lock(dc, pipe_ctx, false); |
| |
| dc->hwss.set_flip_control_gsl(pipe_ctx, false); |
| |
| hubp->funcs->hubp_clk_cntl(hubp, false); |
| |
| dpp->funcs->dpp_dppclk_control(dpp, false, false); |
| |
| hubp->power_gated = true; |
| dc->optimized_required = false; /* We're powering off, no need to optimize */ |
| |
| dcn20_plane_atomic_power_down(dc, pipe_ctx); |
| |
| pipe_ctx->stream = NULL; |
| memset(&pipe_ctx->stream_res, 0, sizeof(pipe_ctx->stream_res)); |
| memset(&pipe_ctx->plane_res, 0, sizeof(pipe_ctx->plane_res)); |
| pipe_ctx->top_pipe = NULL; |
| pipe_ctx->bottom_pipe = NULL; |
| pipe_ctx->plane_state = NULL; |
| } |
| |
| |
| void dcn20_disable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| DC_LOGGER_INIT(dc->ctx->logger); |
| |
| if (!pipe_ctx->plane_res.hubp || pipe_ctx->plane_res.hubp->power_gated) |
| return; |
| |
| dcn20_plane_atomic_disable(dc, pipe_ctx); |
| |
| DC_LOG_DC("Power down front end %d\n", |
| pipe_ctx->pipe_idx); |
| } |
| |
| static void dcn20_init_hw(struct dc *dc) |
| { |
| int i, j; |
| struct abm *abm = dc->res_pool->abm; |
| struct dmcu *dmcu = dc->res_pool->dmcu; |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dc_bios *dcb = dc->ctx->dc_bios; |
| struct resource_pool *res_pool = dc->res_pool; |
| struct dc_state *context = dc->current_state; |
| struct dc_firmware_info fw_info = { { 0 } }; |
| |
| if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks) |
| dc->clk_mgr->funcs->init_clocks(dc->clk_mgr); |
| |
| // Initialize the dccg |
| if (res_pool->dccg->funcs->dccg_init) |
| res_pool->dccg->funcs->dccg_init(res_pool->dccg); |
| |
| //Enable ability to power gate / don't force power on permanently |
| enable_power_gating_plane(dc->hwseq, true); |
| |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| REG_WRITE(RBBMIF_TIMEOUT_DIS, 0xFFFFFFFF); |
| REG_WRITE(RBBMIF_TIMEOUT_DIS_2, 0xFFFFFFFF); |
| |
| dcn20_dccg_init(hws); |
| |
| REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2); |
| REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1); |
| REG_WRITE(REFCLK_CNTL, 0); |
| } else { |
| if (!dcb->funcs->is_accelerated_mode(dcb)) { |
| bios_golden_init(dc); |
| if (dc->ctx->dc_bios->funcs->get_firmware_info( |
| dc->ctx->dc_bios, &fw_info) == BP_RESULT_OK) { |
| res_pool->ref_clocks.xtalin_clock_inKhz = fw_info.pll_info.crystal_frequency; |
| |
| if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| if (res_pool->dccg && res_pool->hubbub) { |
| |
| (res_pool->dccg->funcs->get_dccg_ref_freq)(res_pool->dccg, |
| fw_info.pll_info.crystal_frequency, |
| &res_pool->ref_clocks.dccg_ref_clock_inKhz); |
| |
| (res_pool->hubbub->funcs->get_dchub_ref_freq)(res_pool->hubbub, |
| res_pool->ref_clocks.dccg_ref_clock_inKhz, |
| &res_pool->ref_clocks.dchub_ref_clock_inKhz); |
| } else { |
| // Not all ASICs have DCCG sw component |
| res_pool->ref_clocks.dccg_ref_clock_inKhz = |
| res_pool->ref_clocks.xtalin_clock_inKhz; |
| res_pool->ref_clocks.dchub_ref_clock_inKhz = |
| res_pool->ref_clocks.xtalin_clock_inKhz; |
| } |
| } |
| } else |
| ASSERT_CRITICAL(false); |
| disable_vga(dc->hwseq); |
| } |
| |
| for (i = 0; i < dc->link_count; i++) { |
| /* Power up AND update implementation according to the |
| * required signal (which may be different from the |
| * default signal on connector). |
| */ |
| struct dc_link *link = dc->links[i]; |
| |
| link->link_enc->funcs->hw_init(link->link_enc); |
| } |
| } |
| |
| /* Blank pixel data with OPP DPG */ |
| for (i = 0; i < dc->res_pool->timing_generator_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) { |
| dcn20_init_blank(dc, tg); |
| } |
| } |
| |
| for (i = 0; i < res_pool->timing_generator_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) |
| tg->funcs->lock(tg); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct dpp *dpp = res_pool->dpps[i]; |
| |
| dpp->funcs->dpp_reset(dpp); |
| } |
| |
| /* Reset all MPCC muxes */ |
| res_pool->mpc->funcs->mpc_init(res_pool->mpc); |
| |
| /* initialize OPP mpc_tree parameter */ |
| for (i = 0; i < dc->res_pool->res_cap->num_opp; i++) { |
| res_pool->opps[i]->mpc_tree_params.opp_id = res_pool->opps[i]->inst; |
| res_pool->opps[i]->mpc_tree_params.opp_list = NULL; |
| for (j = 0; j < MAX_PIPES; j++) |
| res_pool->opps[i]->mpcc_disconnect_pending[j] = false; |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| struct hubp *hubp = dc->res_pool->hubps[i]; |
| struct dpp *dpp = dc->res_pool->dpps[i]; |
| |
| pipe_ctx->stream_res.tg = tg; |
| pipe_ctx->pipe_idx = i; |
| |
| pipe_ctx->plane_res.hubp = hubp; |
| pipe_ctx->plane_res.dpp = dpp; |
| pipe_ctx->plane_res.mpcc_inst = dpp->inst; |
| hubp->mpcc_id = dpp->inst; |
| hubp->opp_id = OPP_ID_INVALID; |
| hubp->power_gated = false; |
| pipe_ctx->stream_res.opp = NULL; |
| |
| hubp->funcs->hubp_init(hubp); |
| |
| //dc->res_pool->opps[i]->mpc_tree_params.opp_id = dc->res_pool->opps[i]->inst; |
| //dc->res_pool->opps[i]->mpc_tree_params.opp_list = NULL; |
| dc->res_pool->opps[i]->mpcc_disconnect_pending[pipe_ctx->plane_res.mpcc_inst] = true; |
| pipe_ctx->stream_res.opp = dc->res_pool->opps[i]; |
| /*to do*/ |
| hwss1_plane_atomic_disconnect(dc, pipe_ctx); |
| } |
| |
| /* initialize DWB pointer to MCIF_WB */ |
| for (i = 0; i < res_pool->res_cap->num_dwb; i++) |
| res_pool->dwbc[i]->mcif = res_pool->mcif_wb[i]; |
| |
| for (i = 0; i < dc->res_pool->timing_generator_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) |
| tg->funcs->unlock(tg); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| dc->hwss.disable_plane(dc, pipe_ctx); |
| |
| pipe_ctx->stream_res.tg = NULL; |
| pipe_ctx->plane_res.hubp = NULL; |
| } |
| |
| for (i = 0; i < dc->res_pool->timing_generator_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| tg->funcs->tg_init(tg); |
| } |
| |
| /* end of FPGA. Below if real ASIC */ |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) |
| return; |
| |
| |
| for (i = 0; i < res_pool->audio_count; i++) { |
| struct audio *audio = res_pool->audios[i]; |
| |
| audio->funcs->hw_init(audio); |
| } |
| |
| if (abm != NULL) { |
| abm->funcs->init_backlight(abm); |
| abm->funcs->abm_init(abm); |
| } |
| |
| if (dmcu != NULL) |
| dmcu->funcs->dmcu_init(dmcu); |
| |
| if (abm != NULL && dmcu != NULL) |
| abm->dmcu_is_running = dmcu->funcs->is_dmcu_initialized(dmcu); |
| |
| /* power AFMT HDMI memory TODO: may move to dis/en output save power*/ |
| REG_WRITE(DIO_MEM_PWR_CTRL, 0); |
| |
| if (!dc->debug.disable_clock_gate) { |
| /* enable all DCN clock gating */ |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0); |
| |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0); |
| |
| REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); |
| } |
| |
| } |
| |
| enum dc_status dcn20_enable_stream_timing( |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context, |
| struct dc *dc) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct drr_params params = {0}; |
| unsigned int event_triggers = 0; |
| |
| |
| #if defined(CONFIG_DRM_AMD_DC_DCN2_0) |
| struct pipe_ctx *odm_pipe = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| #endif |
| |
| /* by upper caller loop, pipe0 is parent pipe and be called first. |
| * back end is set up by for pipe0. Other children pipe share back end |
| * with pipe 0. No program is needed. |
| */ |
| if (pipe_ctx->top_pipe != NULL) |
| return DC_OK; |
| |
| /* TODO check if timing_changed, disable stream if timing changed */ |
| |
| if (odm_pipe) |
| pipe_ctx->stream_res.tg->funcs->set_odm_combine( |
| pipe_ctx->stream_res.tg, |
| odm_pipe->stream_res.opp->inst, |
| pipe_ctx->stream->timing.h_addressable/2, |
| pipe_ctx->stream->timing.pixel_encoding); |
| /* HW program guide assume display already disable |
| * by unplug sequence. OTG assume stop. |
| */ |
| pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, true); |
| |
| if (false == pipe_ctx->clock_source->funcs->program_pix_clk( |
| pipe_ctx->clock_source, |
| &pipe_ctx->stream_res.pix_clk_params, |
| &pipe_ctx->pll_settings)) { |
| BREAK_TO_DEBUGGER(); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| pipe_ctx->stream_res.tg->funcs->program_timing( |
| pipe_ctx->stream_res.tg, |
| &stream->timing, |
| pipe_ctx->pipe_dlg_param.vready_offset, |
| pipe_ctx->pipe_dlg_param.vstartup_start, |
| pipe_ctx->pipe_dlg_param.vupdate_offset, |
| pipe_ctx->pipe_dlg_param.vupdate_width, |
| pipe_ctx->stream->signal, |
| true); |
| |
| if (pipe_ctx->stream_res.tg->funcs->setup_global_lock) |
| pipe_ctx->stream_res.tg->funcs->setup_global_lock( |
| pipe_ctx->stream_res.tg); |
| |
| if (odm_pipe) |
| odm_pipe->stream_res.opp->funcs->opp_pipe_clock_control( |
| odm_pipe->stream_res.opp, |
| true); |
| |
| pipe_ctx->stream_res.opp->funcs->opp_pipe_clock_control( |
| pipe_ctx->stream_res.opp, |
| true); |
| |
| dc->hwss.blank_pixel_data(dc, pipe_ctx, true); |
| |
| /* VTG is within DCHUB command block. DCFCLK is always on */ |
| if (false == pipe_ctx->stream_res.tg->funcs->enable_crtc(pipe_ctx->stream_res.tg)) { |
| BREAK_TO_DEBUGGER(); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| dcn20_hwss_wait_for_blank_complete(pipe_ctx->stream_res.opp); |
| |
| params.vertical_total_min = stream->adjust.v_total_min; |
| params.vertical_total_max = stream->adjust.v_total_max; |
| if (pipe_ctx->stream_res.tg->funcs->set_drr) |
| pipe_ctx->stream_res.tg->funcs->set_drr( |
| pipe_ctx->stream_res.tg, ¶ms); |
| |
| // DRR should set trigger event to monitor surface update event |
| if (stream->adjust.v_total_min != 0 && stream->adjust.v_total_max != 0) |
| event_triggers = 0x80; |
| if (pipe_ctx->stream_res.tg->funcs->set_static_screen_control) |
| pipe_ctx->stream_res.tg->funcs->set_static_screen_control( |
| pipe_ctx->stream_res.tg, event_triggers); |
| |
| /* TODO program crtc source select for non-virtual signal*/ |
| /* TODO program FMT */ |
| /* TODO setup link_enc */ |
| /* TODO set stream attributes */ |
| /* TODO program audio */ |
| /* TODO enable stream if timing changed */ |
| /* TODO unblank stream if DP */ |
| |
| return DC_OK; |
| } |
| |
| void dcn20_program_output_csc(struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| enum dc_color_space colorspace, |
| uint16_t *matrix, |
| int opp_id) |
| { |
| struct mpc *mpc = dc->res_pool->mpc; |
| enum mpc_output_csc_mode ocsc_mode = MPC_OUTPUT_CSC_COEF_A; |
| |
| if (pipe_ctx->stream->csc_color_matrix.enable_adjustment == true) { |
| if (mpc->funcs->set_output_csc != NULL) |
| mpc->funcs->set_output_csc(mpc, |
| opp_id, |
| matrix, |
| ocsc_mode); |
| } else { |
| if (mpc->funcs->set_ocsc_default != NULL) |
| mpc->funcs->set_ocsc_default(mpc, |
| opp_id, |
| colorspace, |
| ocsc_mode); |
| } |
| } |
| |
| bool dcn20_set_output_transfer_func(struct pipe_ctx *pipe_ctx, |
| const struct dc_stream_state *stream) |
| { |
| int mpcc_id = pipe_ctx->plane_res.hubp->inst; |
| struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; |
| struct pwl_params *params = NULL; |
| /* |
| * program OGAM only for the top pipe |
| * if there is a pipe split then fix diagnostic is required: |
| * how to pass OGAM parameter for stream. |
| * if programming for all pipes is required then remove condition |
| * pipe_ctx->top_pipe == NULL ,but then fix the diagnostic. |
| */ |
| if ((pipe_ctx->top_pipe == NULL || dc_res_is_odm_head_pipe(pipe_ctx)) |
| && mpc->funcs->set_output_gamma && stream->out_transfer_func) { |
| if (stream->out_transfer_func->type == TF_TYPE_HWPWL) |
| params = &stream->out_transfer_func->pwl; |
| else if (pipe_ctx->stream->out_transfer_func->type == |
| TF_TYPE_DISTRIBUTED_POINTS && |
| cm_helper_translate_curve_to_hw_format( |
| stream->out_transfer_func, |
| &mpc->blender_params, false)) |
| params = &mpc->blender_params; |
| /* |
| * there is no ROM |
| */ |
| if (stream->out_transfer_func->type == TF_TYPE_PREDEFINED) |
| BREAK_TO_DEBUGGER(); |
| } |
| /* |
| * if above if is not executed then 'params' equal to 0 and set in bypass |
| */ |
| mpc->funcs->set_output_gamma(mpc, mpcc_id, params); |
| |
| return true; |
| } |
| |
| static bool dcn20_set_blend_lut( |
| struct pipe_ctx *pipe_ctx, const struct dc_plane_state *plane_state) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| bool result = true; |
| struct pwl_params *blend_lut = NULL; |
| |
| if (plane_state->blend_tf) { |
| if (plane_state->blend_tf->type == TF_TYPE_HWPWL) |
| blend_lut = &plane_state->blend_tf->pwl; |
| else if (plane_state->blend_tf->type == TF_TYPE_DISTRIBUTED_POINTS) { |
| cm_helper_translate_curve_to_hw_format( |
| plane_state->blend_tf, |
| &dpp_base->regamma_params, false); |
| blend_lut = &dpp_base->regamma_params; |
| } |
| } |
| result = dpp_base->funcs->dpp_program_blnd_lut(dpp_base, blend_lut); |
| |
| return result; |
| } |
| |
| static bool dcn20_set_shaper_3dlut( |
| struct pipe_ctx *pipe_ctx, const struct dc_plane_state *plane_state) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| bool result = true; |
| struct pwl_params *shaper_lut = NULL; |
| |
| if (plane_state->in_shaper_func) { |
| if (plane_state->in_shaper_func->type == TF_TYPE_HWPWL) |
| shaper_lut = &plane_state->in_shaper_func->pwl; |
| else if (plane_state->in_shaper_func->type == TF_TYPE_DISTRIBUTED_POINTS) { |
| cm_helper_translate_curve_to_hw_format( |
| plane_state->in_shaper_func, |
| &dpp_base->shaper_params, true); |
| shaper_lut = &dpp_base->shaper_params; |
| } |
| } |
| |
| result = dpp_base->funcs->dpp_program_shaper_lut(dpp_base, shaper_lut); |
| if (plane_state->lut3d_func && |
| plane_state->lut3d_func->initialized == true) |
| result = dpp_base->funcs->dpp_program_3dlut(dpp_base, |
| &plane_state->lut3d_func->lut_3d); |
| else |
| result = dpp_base->funcs->dpp_program_3dlut(dpp_base, NULL); |
| |
| if (plane_state->lut3d_func && |
| plane_state->lut3d_func->initialized == true && |
| plane_state->lut3d_func->hdr_multiplier != 0) |
| dpp_base->funcs->dpp_set_hdr_multiplier(dpp_base, |
| plane_state->lut3d_func->hdr_multiplier); |
| else |
| dpp_base->funcs->dpp_set_hdr_multiplier(dpp_base, 0x1f000); |
| |
| return result; |
| } |
| |
| bool dcn20_set_input_transfer_func(struct pipe_ctx *pipe_ctx, |
| const struct dc_plane_state *plane_state) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| const struct dc_transfer_func *tf = NULL; |
| bool result = true; |
| bool use_degamma_ram = false; |
| |
| if (dpp_base == NULL || plane_state == NULL) |
| return false; |
| |
| dcn20_set_shaper_3dlut(pipe_ctx, plane_state); |
| dcn20_set_blend_lut(pipe_ctx, plane_state); |
| |
| if (plane_state->in_transfer_func) |
| tf = plane_state->in_transfer_func; |
| |
| |
| if (tf == NULL) { |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_BYPASS); |
| return true; |
| } |
| |
| if (tf->type == TF_TYPE_HWPWL || tf->type == TF_TYPE_DISTRIBUTED_POINTS) |
| use_degamma_ram = true; |
| |
| if (use_degamma_ram == true) { |
| if (tf->type == TF_TYPE_HWPWL) |
| dpp_base->funcs->dpp_program_degamma_pwl(dpp_base, |
| &tf->pwl); |
| else if (tf->type == TF_TYPE_DISTRIBUTED_POINTS) { |
| cm_helper_translate_curve_to_degamma_hw_format(tf, |
| &dpp_base->degamma_params); |
| dpp_base->funcs->dpp_program_degamma_pwl(dpp_base, |
| &dpp_base->degamma_params); |
| } |
| return true; |
| } |
| /* handle here the optimized cases when de-gamma ROM could be used. |
| * |
| */ |
| if (tf->type == TF_TYPE_PREDEFINED) { |
| switch (tf->tf) { |
| case TRANSFER_FUNCTION_SRGB: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_HW_sRGB); |
| break; |
| case TRANSFER_FUNCTION_BT709: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_HW_xvYCC); |
| break; |
| case TRANSFER_FUNCTION_LINEAR: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_BYPASS); |
| break; |
| case TRANSFER_FUNCTION_PQ: |
| default: |
| result = false; |
| break; |
| } |
| } else if (tf->type == TF_TYPE_BYPASS) |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_BYPASS); |
| else { |
| /* |
| * if we are here, we did not handle correctly. |
| * fix is required for this use case |
| */ |
| BREAK_TO_DEBUGGER(); |
| dpp_base->funcs->dpp_set_degamma(dpp_base, |
| IPP_DEGAMMA_MODE_BYPASS); |
| } |
| |
| return result; |
| } |
| |
| static void dcn20_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx *pipe_ctx) |
| { |
| struct pipe_ctx *combine_pipe = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| |
| if (combine_pipe) |
| pipe_ctx->stream_res.tg->funcs->set_odm_combine( |
| pipe_ctx->stream_res.tg, |
| combine_pipe->stream_res.opp->inst, |
| pipe_ctx->plane_res.scl_data.h_active, |
| pipe_ctx->stream->timing.pixel_encoding); |
| else |
| pipe_ctx->stream_res.tg->funcs->set_odm_bypass( |
| pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); |
| } |
| |
| void dcn20_blank_pixel_data( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| bool blank) |
| { |
| struct tg_color black_color = {0}; |
| struct stream_resource *stream_res = &pipe_ctx->stream_res; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| enum dc_color_space color_space = stream->output_color_space; |
| enum controller_dp_test_pattern test_pattern = CONTROLLER_DP_TEST_PATTERN_SOLID_COLOR; |
| struct pipe_ctx *bot_odm_pipe = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| |
| int width = stream->timing.h_addressable + stream->timing.h_border_left + stream->timing.h_border_right; |
| int height = stream->timing.v_addressable + stream->timing.v_border_bottom + stream->timing.v_border_top; |
| |
| /* get opp dpg blank color */ |
| color_space_to_black_color(dc, color_space, &black_color); |
| |
| if (bot_odm_pipe) |
| width = width / 2; |
| |
| if (blank) { |
| if (stream_res->abm) |
| stream_res->abm->funcs->set_abm_immediate_disable(stream_res->abm); |
| |
| if (dc->debug.visual_confirm != VISUAL_CONFIRM_DISABLE) |
| test_pattern = CONTROLLER_DP_TEST_PATTERN_COLORSQUARES; |
| } else { |
| test_pattern = CONTROLLER_DP_TEST_PATTERN_VIDEOMODE; |
| } |
| |
| stream_res->opp->funcs->opp_set_disp_pattern_generator( |
| stream_res->opp, |
| test_pattern, |
| stream->timing.display_color_depth, |
| &black_color, |
| width, |
| height); |
| |
| if (bot_odm_pipe) { |
| bot_odm_pipe->stream_res.opp->funcs->opp_set_disp_pattern_generator( |
| bot_odm_pipe->stream_res.opp, |
| dc->debug.visual_confirm != VISUAL_CONFIRM_DISABLE ? |
| CONTROLLER_DP_TEST_PATTERN_COLORRAMP : test_pattern, |
| stream->timing.display_color_depth, |
| &black_color, |
| width, |
| height); |
| } |
| |
| if (!blank) |
| if (stream_res->abm) { |
| stream_res->abm->funcs->set_pipe(stream_res->abm, stream_res->tg->inst + 1); |
| stream_res->abm->funcs->set_abm_level(stream_res->abm, stream->abm_level); |
| } |
| } |
| |
| |
| static void dcn20_power_on_plane( |
| struct dce_hwseq *hws, |
| struct pipe_ctx *pipe_ctx) |
| { |
| DC_LOGGER_INIT(hws->ctx->logger); |
| if (REG(DC_IP_REQUEST_CNTL)) { |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| dcn20_dpp_pg_control(hws, pipe_ctx->plane_res.dpp->inst, true); |
| dcn20_hubp_pg_control(hws, pipe_ctx->plane_res.hubp->inst, true); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| DC_LOG_DEBUG( |
| "Un-gated front end for pipe %d\n", pipe_ctx->plane_res.hubp->inst); |
| } |
| } |
| |
| void dcn20_enable_plane( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| //if (dc->debug.sanity_checks) { |
| // dcn10_verify_allow_pstate_change_high(dc); |
| //} |
| dcn20_power_on_plane(dc->hwseq, pipe_ctx); |
| |
| /* enable DCFCLK current DCHUB */ |
| pipe_ctx->plane_res.hubp->funcs->hubp_clk_cntl(pipe_ctx->plane_res.hubp, true); |
| |
| /* make sure OPP_PIPE_CLOCK_EN = 1 */ |
| pipe_ctx->stream_res.opp->funcs->opp_pipe_clock_control( |
| pipe_ctx->stream_res.opp, |
| true); |
| |
| /* TODO: enable/disable in dm as per update type. |
| if (plane_state) { |
| DC_LOG_DC(dc->ctx->logger, |
| "Pipe:%d 0x%x: addr hi:0x%x, " |
| "addr low:0x%x, " |
| "src: %d, %d, %d," |
| " %d; dst: %d, %d, %d, %d;\n", |
| pipe_ctx->pipe_idx, |
| plane_state, |
| plane_state->address.grph.addr.high_part, |
| plane_state->address.grph.addr.low_part, |
| plane_state->src_rect.x, |
| plane_state->src_rect.y, |
| plane_state->src_rect.width, |
| plane_state->src_rect.height, |
| plane_state->dst_rect.x, |
| plane_state->dst_rect.y, |
| plane_state->dst_rect.width, |
| plane_state->dst_rect.height); |
| |
| DC_LOG_DC(dc->ctx->logger, |
| "Pipe %d: width, height, x, y format:%d\n" |
| "viewport:%d, %d, %d, %d\n" |
| "recout: %d, %d, %d, %d\n", |
| pipe_ctx->pipe_idx, |
| plane_state->format, |
| pipe_ctx->plane_res.scl_data.viewport.width, |
| pipe_ctx->plane_res.scl_data.viewport.height, |
| pipe_ctx->plane_res.scl_data.viewport.x, |
| pipe_ctx->plane_res.scl_data.viewport.y, |
| pipe_ctx->plane_res.scl_data.recout.width, |
| pipe_ctx->plane_res.scl_data.recout.height, |
| pipe_ctx->plane_res.scl_data.recout.x, |
| pipe_ctx->plane_res.scl_data.recout.y); |
| print_rq_dlg_ttu(dc, pipe_ctx); |
| } |
| */ |
| if (dc->vm_pa_config.valid) { |
| struct vm_system_aperture_param apt; |
| |
| apt.sys_default.quad_part = 0; |
| |
| apt.sys_low.quad_part = dc->vm_pa_config.system_aperture.start_addr; |
| apt.sys_high.quad_part = dc->vm_pa_config.system_aperture.end_addr; |
| |
| // Program system aperture settings |
| pipe_ctx->plane_res.hubp->funcs->hubp_set_vm_system_aperture_settings(pipe_ctx->plane_res.hubp, &apt); |
| } |
| |
| // if (dc->debug.sanity_checks) { |
| // dcn10_verify_allow_pstate_change_high(dc); |
| // } |
| } |
| |
| |
| static void dcn20_program_pipe( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| pipe_ctx->plane_state->update_flags.bits.full_update = |
| context->commit_hints.full_update_needed ? 1 : pipe_ctx->plane_state->update_flags.bits.full_update; |
| |
| if (pipe_ctx->plane_state->update_flags.bits.full_update) |
| dcn20_enable_plane(dc, pipe_ctx, context); |
| |
| update_dchubp_dpp(dc, pipe_ctx, context); |
| |
| set_hdr_multiplier(pipe_ctx); |
| |
| if (pipe_ctx->plane_state->update_flags.bits.full_update || |
| pipe_ctx->plane_state->update_flags.bits.in_transfer_func_change || |
| pipe_ctx->plane_state->update_flags.bits.gamma_change) |
| dc->hwss.set_input_transfer_func(pipe_ctx, pipe_ctx->plane_state); |
| |
| /* dcn10_translate_regamma_to_hw_format takes 750us to finish |
| * only do gamma programming for full update. |
| * TODO: This can be further optimized/cleaned up |
| * Always call this for now since it does memcmp inside before |
| * doing heavy calculation and programming |
| */ |
| if (pipe_ctx->plane_state->update_flags.bits.full_update) |
| dc->hwss.set_output_transfer_func(pipe_ctx, pipe_ctx->stream); |
| } |
| |
| static void dcn20_program_all_pipe_in_tree( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| if (pipe_ctx->top_pipe == NULL) { |
| bool blank = !is_pipe_tree_visible(pipe_ctx); |
| |
| pipe_ctx->stream_res.tg->funcs->program_global_sync( |
| pipe_ctx->stream_res.tg, |
| pipe_ctx->pipe_dlg_param.vready_offset, |
| pipe_ctx->pipe_dlg_param.vstartup_start, |
| pipe_ctx->pipe_dlg_param.vupdate_offset, |
| pipe_ctx->pipe_dlg_param.vupdate_width); |
| |
| pipe_ctx->stream_res.tg->funcs->set_vtg_params( |
| pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); |
| |
| dc->hwss.blank_pixel_data(dc, pipe_ctx, blank); |
| |
| if (dc->hwss.update_odm) |
| dc->hwss.update_odm(dc, context, pipe_ctx); |
| } |
| |
| if (pipe_ctx->plane_state != NULL) |
| dcn20_program_pipe(dc, pipe_ctx, context); |
| |
| if (pipe_ctx->bottom_pipe != NULL && pipe_ctx->bottom_pipe != pipe_ctx) |
| dcn20_program_all_pipe_in_tree(dc, pipe_ctx->bottom_pipe, context); |
| } |
| |
| void dcn20_pipe_control_lock_global( |
| struct dc *dc, |
| struct pipe_ctx *pipe, |
| bool lock) |
| { |
| if (lock) { |
| pipe->stream_res.tg->funcs->lock_doublebuffer_enable( |
| pipe->stream_res.tg); |
| pipe->stream_res.tg->funcs->lock(pipe->stream_res.tg); |
| } else { |
| pipe->stream_res.tg->funcs->unlock(pipe->stream_res.tg); |
| pipe->stream_res.tg->funcs->wait_for_state(pipe->stream_res.tg, |
| CRTC_STATE_VACTIVE); |
| pipe->stream_res.tg->funcs->wait_for_state(pipe->stream_res.tg, |
| CRTC_STATE_VBLANK); |
| pipe->stream_res.tg->funcs->wait_for_state(pipe->stream_res.tg, |
| CRTC_STATE_VACTIVE); |
| pipe->stream_res.tg->funcs->lock_doublebuffer_disable( |
| pipe->stream_res.tg); |
| } |
| } |
| |
| void dcn20_pipe_control_lock( |
| struct dc *dc, |
| struct pipe_ctx *pipe, |
| bool lock) |
| { |
| bool flip_immediate = false; |
| |
| /* use TG master update lock to lock everything on the TG |
| * therefore only top pipe need to lock |
| */ |
| if (pipe->top_pipe) |
| return; |
| |
| if (pipe->plane_state != NULL) |
| flip_immediate = pipe->plane_state->flip_immediate; |
| |
| if (flip_immediate && lock) { |
| while (pipe->plane_res.hubp->funcs->hubp_is_flip_pending(pipe->plane_res.hubp)) { |
| udelay(1); |
| } |
| |
| if (pipe->bottom_pipe != NULL) |
| while (pipe->bottom_pipe->plane_res.hubp->funcs->hubp_is_flip_pending(pipe->bottom_pipe->plane_res.hubp)) { |
| udelay(1); |
| } |
| } |
| |
| /* In flip immediate and pipe splitting case, we need to use GSL |
| * for synchronization. Only do setup on locking and on flip type change. |
| */ |
| if (lock && pipe->bottom_pipe != NULL) |
| if ((flip_immediate && pipe->stream_res.gsl_group == 0) || |
| (!flip_immediate && pipe->stream_res.gsl_group > 0)) |
| dcn20_setup_gsl_group_as_lock(dc, pipe, flip_immediate); |
| |
| if (pipe->plane_state != NULL && pipe->plane_state->triplebuffer_flips) { |
| if (lock) |
| pipe->stream_res.tg->funcs->triplebuffer_lock(pipe->stream_res.tg); |
| else |
| pipe->stream_res.tg->funcs->triplebuffer_unlock(pipe->stream_res.tg); |
| } else { |
| if (lock) |
| pipe->stream_res.tg->funcs->lock(pipe->stream_res.tg); |
| else |
| pipe->stream_res.tg->funcs->unlock(pipe->stream_res.tg); |
| } |
| } |
| |
| static void dcn20_apply_ctx_for_surface( |
| struct dc *dc, |
| const struct dc_stream_state *stream, |
| int num_planes, |
| struct dc_state *context) |
| { |
| |
| int i; |
| struct timing_generator *tg; |
| bool removed_pipe[6] = { false }; |
| bool interdependent_update = false; |
| struct pipe_ctx *top_pipe_to_program = |
| find_top_pipe_for_stream(dc, context, stream); |
| DC_LOGGER_INIT(dc->ctx->logger); |
| |
| if (!top_pipe_to_program) |
| return; |
| |
| tg = top_pipe_to_program->stream_res.tg; |
| |
| interdependent_update = top_pipe_to_program->plane_state && |
| top_pipe_to_program->plane_state->update_flags.bits.full_update; |
| |
| if (interdependent_update) |
| lock_all_pipes(dc, context, true); |
| else |
| dcn20_pipe_control_lock(dc, top_pipe_to_program, true); |
| |
| if (num_planes == 0) { |
| /* OTG blank before remove all front end */ |
| dc->hwss.blank_pixel_data(dc, top_pipe_to_program, true); |
| } |
| |
| /* Disconnect unused mpcc */ |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *old_pipe_ctx = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| /* |
| * Powergate reused pipes that are not powergated |
| * fairly hacky right now, using opp_id as indicator |
| * TODO: After move dc_post to dc_update, this will |
| * be removed. |
| */ |
| if (pipe_ctx->plane_state && !old_pipe_ctx->plane_state) { |
| if (old_pipe_ctx->stream_res.tg == tg && |
| old_pipe_ctx->plane_res.hubp && |
| old_pipe_ctx->plane_res.hubp->opp_id != OPP_ID_INVALID) |
| dcn20_disable_plane(dc, old_pipe_ctx); |
| } |
| |
| if ((!pipe_ctx->plane_state || |
| pipe_ctx->stream_res.tg != old_pipe_ctx->stream_res.tg) && |
| old_pipe_ctx->plane_state && |
| old_pipe_ctx->stream_res.tg == tg) { |
| |
| dc->hwss.plane_atomic_disconnect(dc, old_pipe_ctx); |
| removed_pipe[i] = true; |
| |
| DC_LOG_DC("Reset mpcc for pipe %d\n", |
| old_pipe_ctx->pipe_idx); |
| } |
| } |
| |
| if (num_planes > 0) |
| dcn20_program_all_pipe_in_tree(dc, top_pipe_to_program, context); |
| |
| /* Program secondary blending tree and writeback pipes */ |
| if ((stream->num_wb_info > 0) && (dc->hwss.program_all_writeback_pipes_in_tree)) |
| dc->hwss.program_all_writeback_pipes_in_tree(dc, stream, context); |
| |
| if (interdependent_update) |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| /* Skip inactive pipes and ones already updated */ |
| if (!pipe_ctx->stream || pipe_ctx->stream == stream || |
| !pipe_ctx->plane_state || !tg->funcs->is_tg_enabled(tg)) |
| continue; |
| |
| pipe_ctx->plane_res.hubp->funcs->hubp_setup_interdependent( |
| pipe_ctx->plane_res.hubp, |
| &pipe_ctx->dlg_regs, |
| &pipe_ctx->ttu_regs); |
| } |
| |
| if (interdependent_update) |
| lock_all_pipes(dc, context, false); |
| else |
| dcn20_pipe_control_lock(dc, top_pipe_to_program, false); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) |
| if (removed_pipe[i]) |
| dcn20_disable_plane(dc, &dc->current_state->res_ctx.pipe_ctx[i]); |
| } |
| |
| |
| void dcn20_prepare_bandwidth( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| struct hubbub *hubbub = dc->res_pool->hubbub; |
| |
| /* program dchubbub watermarks */ |
| hubbub->funcs->program_watermarks(hubbub, |
| &context->bw_ctx.bw.dcn.watermarks, |
| dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000, |
| false); |
| |
| dc->clk_mgr->funcs->update_clocks( |
| dc->clk_mgr, |
| context, |
| false); |
| } |
| |
| void dcn20_optimize_bandwidth( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| struct hubbub *hubbub = dc->res_pool->hubbub; |
| |
| /* program dchubbub watermarks */ |
| hubbub->funcs->program_watermarks(hubbub, |
| &context->bw_ctx.bw.dcn.watermarks, |
| dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000, |
| true); |
| |
| dc->clk_mgr->funcs->update_clocks( |
| dc->clk_mgr, |
| context, |
| true); |
| } |
| |
| bool dcn20_update_bandwidth( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| int i; |
| |
| /* recalculate DML parameters */ |
| if (!dc->res_pool->funcs->validate_bandwidth(dc, context, false)) |
| return false; |
| |
| /* apply updated bandwidth parameters */ |
| dc->hwss.prepare_bandwidth(dc, context); |
| |
| /* update hubp configs for all pipes */ |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| if (pipe_ctx->plane_state == NULL) |
| continue; |
| |
| if (pipe_ctx->top_pipe == NULL) { |
| bool blank = !is_pipe_tree_visible(pipe_ctx); |
| |
| pipe_ctx->stream_res.tg->funcs->program_global_sync( |
| pipe_ctx->stream_res.tg, |
| pipe_ctx->pipe_dlg_param.vready_offset, |
| pipe_ctx->pipe_dlg_param.vstartup_start, |
| pipe_ctx->pipe_dlg_param.vupdate_offset, |
| pipe_ctx->pipe_dlg_param.vupdate_width); |
| |
| pipe_ctx->stream_res.tg->funcs->set_vtg_params( |
| pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); |
| |
| dc->hwss.blank_pixel_data(dc, pipe_ctx, blank); |
| } |
| |
| pipe_ctx->plane_res.hubp->funcs->hubp_setup( |
| pipe_ctx->plane_res.hubp, |
| &pipe_ctx->dlg_regs, |
| &pipe_ctx->ttu_regs, |
| &pipe_ctx->rq_regs, |
| &pipe_ctx->pipe_dlg_param); |
| } |
| |
| return true; |
| } |
| |
| static void dcn20_enable_writeback( |
| struct dc *dc, |
| const struct dc_stream_status *stream_status, |
| struct dc_writeback_info *wb_info) |
| { |
| struct dwbc *dwb; |
| struct mcif_wb *mcif_wb; |
| struct timing_generator *optc; |
| |
| ASSERT(wb_info->dwb_pipe_inst < MAX_DWB_PIPES); |
| ASSERT(wb_info->wb_enabled); |
| dwb = dc->res_pool->dwbc[wb_info->dwb_pipe_inst]; |
| mcif_wb = dc->res_pool->mcif_wb[wb_info->dwb_pipe_inst]; |
| |
| /* set the OPTC source mux */ |
| ASSERT(stream_status->primary_otg_inst < MAX_PIPES); |
| optc = dc->res_pool->timing_generators[stream_status->primary_otg_inst]; |
| optc->funcs->set_dwb_source(optc, wb_info->dwb_pipe_inst); |
| /* set MCIF_WB buffer and arbitration configuration */ |
| mcif_wb->funcs->config_mcif_buf(mcif_wb, &wb_info->mcif_buf_params, wb_info->dwb_params.dest_height); |
| mcif_wb->funcs->config_mcif_arb(mcif_wb, &dc->current_state->bw_ctx.bw.dcn.bw_writeback.mcif_wb_arb[wb_info->dwb_pipe_inst]); |
| /* Enable MCIF_WB */ |
| mcif_wb->funcs->enable_mcif(mcif_wb); |
| /* Enable DWB */ |
| dwb->funcs->enable(dwb, &wb_info->dwb_params); |
| /* TODO: add sequence to enable/disable warmup */ |
| } |
| |
| void dcn20_disable_writeback( |
| struct dc *dc, |
| unsigned int dwb_pipe_inst) |
| { |
| struct dwbc *dwb; |
| struct mcif_wb *mcif_wb; |
| |
| ASSERT(dwb_pipe_inst < MAX_DWB_PIPES); |
| dwb = dc->res_pool->dwbc[dwb_pipe_inst]; |
| mcif_wb = dc->res_pool->mcif_wb[dwb_pipe_inst]; |
| |
| dwb->funcs->disable(dwb); |
| mcif_wb->funcs->disable_mcif(mcif_wb); |
| } |
| |
| bool dcn20_hwss_wait_for_blank_complete( |
| struct output_pixel_processor *opp) |
| { |
| int counter; |
| |
| for (counter = 0; counter < 1000; counter++) { |
| if (opp->funcs->dpg_is_blanked(opp)) |
| break; |
| |
| udelay(100); |
| } |
| |
| if (counter == 1000) { |
| dm_error("DC: failed to blank crtc!\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool dcn20_dmdata_status_done(struct pipe_ctx *pipe_ctx) |
| { |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| |
| if (!hubp) |
| return false; |
| return hubp->funcs->dmdata_status_done(hubp); |
| } |
| |
| static void dcn20_disable_stream_gating(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT |
| struct dce_hwseq *hws = dc->hwseq; |
| struct pipe_ctx *bot_odm_pipe = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| |
| if (pipe_ctx->stream_res.dsc) { |
| dcn20_dsc_pg_control(hws, pipe_ctx->stream_res.dsc->inst, true); |
| if (bot_odm_pipe) |
| dcn20_dsc_pg_control(hws, bot_odm_pipe->stream_res.dsc->inst, true); |
| } |
| #endif |
| } |
| |
| static void dcn20_enable_stream_gating(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT |
| struct dce_hwseq *hws = dc->hwseq; |
| struct pipe_ctx *bot_odm_pipe = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| |
| if (pipe_ctx->stream_res.dsc) { |
| dcn20_dsc_pg_control(hws, pipe_ctx->stream_res.dsc->inst, false); |
| if (bot_odm_pipe) |
| dcn20_dsc_pg_control(hws, bot_odm_pipe->stream_res.dsc->inst, false); |
| } |
| #endif |
| } |
| |
| void dcn20_set_dmdata_attributes(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_dmdata_attributes attr = { 0 }; |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| |
| attr.dmdata_mode = DMDATA_HW_MODE; |
| attr.dmdata_size = |
| dc_is_hdmi_signal(pipe_ctx->stream->signal) ? 32 : 36; |
| attr.address.quad_part = |
| pipe_ctx->stream->dmdata_address.quad_part; |
| attr.dmdata_dl_delta = 0; |
| attr.dmdata_qos_mode = 0; |
| attr.dmdata_qos_level = 0; |
| attr.dmdata_repeat = 1; /* always repeat */ |
| attr.dmdata_updated = 1; |
| attr.dmdata_sw_data = NULL; |
| |
| hubp->funcs->dmdata_set_attributes(hubp, &attr); |
| } |
| |
| void dcn20_disable_stream(struct pipe_ctx *pipe_ctx, int option) |
| { |
| dce110_disable_stream(pipe_ctx, option); |
| } |
| |
| static void dcn20_init_vm_ctx( |
| struct dce_hwseq *hws, |
| struct dc *dc, |
| struct dc_virtual_addr_space_config *va_config, |
| int vmid) |
| { |
| struct dcn_hubbub_virt_addr_config config; |
| |
| if (vmid == 0) { |
| ASSERT(0); /* VMID cannot be 0 for vm context */ |
| return; |
| } |
| |
| config.page_table_start_addr = va_config->page_table_start_addr; |
| config.page_table_end_addr = va_config->page_table_end_addr; |
| config.page_table_block_size = va_config->page_table_block_size_in_bytes; |
| config.page_table_depth = va_config->page_table_depth; |
| config.page_table_base_addr = va_config->page_table_base_addr; |
| |
| dc->res_pool->hubbub->funcs->init_vm_ctx(dc->res_pool->hubbub, &config, vmid); |
| } |
| |
| static int dcn20_init_sys_ctx(struct dce_hwseq *hws, struct dc *dc, struct dc_phy_addr_space_config *pa_config) |
| { |
| struct dcn_hubbub_phys_addr_config config; |
| |
| config.system_aperture.fb_top = pa_config->system_aperture.fb_top; |
| config.system_aperture.fb_offset = pa_config->system_aperture.fb_offset; |
| config.system_aperture.fb_base = pa_config->system_aperture.fb_base; |
| config.system_aperture.agp_top = pa_config->system_aperture.agp_top; |
| config.system_aperture.agp_bot = pa_config->system_aperture.agp_bot; |
| config.system_aperture.agp_base = pa_config->system_aperture.agp_base; |
| config.gart_config.page_table_start_addr = pa_config->gart_config.page_table_start_addr; |
| config.gart_config.page_table_end_addr = pa_config->gart_config.page_table_end_addr; |
| config.gart_config.page_table_base_addr = pa_config->gart_config.page_table_base_addr; |
| |
| return dc->res_pool->hubbub->funcs->init_dchub_sys_ctx(dc->res_pool->hubbub, &config); |
| } |
| |
| static bool patch_address_for_sbs_tb_stereo( |
| struct pipe_ctx *pipe_ctx, PHYSICAL_ADDRESS_LOC *addr) |
| { |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| bool sec_split = pipe_ctx->top_pipe && |
| pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state; |
| if (sec_split && plane_state->address.type == PLN_ADDR_TYPE_GRPH_STEREO && |
| (pipe_ctx->stream->timing.timing_3d_format == |
| TIMING_3D_FORMAT_SIDE_BY_SIDE || |
| pipe_ctx->stream->timing.timing_3d_format == |
| TIMING_3D_FORMAT_TOP_AND_BOTTOM)) { |
| *addr = plane_state->address.grph_stereo.left_addr; |
| plane_state->address.grph_stereo.left_addr = |
| plane_state->address.grph_stereo.right_addr; |
| return true; |
| } |
| |
| if (pipe_ctx->stream->view_format != VIEW_3D_FORMAT_NONE && |
| plane_state->address.type != PLN_ADDR_TYPE_GRPH_STEREO) { |
| plane_state->address.type = PLN_ADDR_TYPE_GRPH_STEREO; |
| plane_state->address.grph_stereo.right_addr = |
| plane_state->address.grph_stereo.left_addr; |
| } |
| return false; |
| } |
| |
| |
| static void dcn20_update_plane_addr(const struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| bool addr_patched = false; |
| PHYSICAL_ADDRESS_LOC addr; |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| |
| if (plane_state == NULL) |
| return; |
| |
| addr_patched = patch_address_for_sbs_tb_stereo(pipe_ctx, &addr); |
| |
| // Call Helper to track VMID use |
| vm_helper_mark_vmid_used(dc->vm_helper, plane_state->address.vmid, pipe_ctx->plane_res.hubp->inst); |
| |
| pipe_ctx->plane_res.hubp->funcs->hubp_program_surface_flip_and_addr( |
| pipe_ctx->plane_res.hubp, |
| &plane_state->address, |
| plane_state->flip_immediate); |
| |
| plane_state->status.requested_address = plane_state->address; |
| |
| if (plane_state->flip_immediate) |
| plane_state->status.current_address = plane_state->address; |
| |
| if (addr_patched) |
| pipe_ctx->plane_state->address.grph_stereo.left_addr = addr; |
| } |
| |
| void dcn20_unblank_stream(struct pipe_ctx *pipe_ctx, |
| struct dc_link_settings *link_settings) |
| { |
| struct encoder_unblank_param params = { { 0 } }; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| params.odm = dc_res_get_odm_bottom_pipe(pipe_ctx); |
| |
| /* only 3 items below are used by unblank */ |
| params.timing = pipe_ctx->stream->timing; |
| |
| params.link_settings.link_rate = link_settings->link_rate; |
| |
| if (dc_is_dp_signal(pipe_ctx->stream->signal)) { |
| if (optc1_is_two_pixels_per_containter(&stream->timing) || params.odm) |
| params.timing.pix_clk_100hz /= 2; |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_odm_combine( |
| pipe_ctx->stream_res.stream_enc, params.odm); |
| pipe_ctx->stream_res.stream_enc->funcs->dp_unblank(pipe_ctx->stream_res.stream_enc, ¶ms); |
| } |
| |
| if (link->local_sink && link->local_sink->sink_signal == SIGNAL_TYPE_EDP) { |
| link->dc->hwss.edp_backlight_control(link, true); |
| } |
| } |
| |
| void dcn20_setup_vupdate_interrupt(struct pipe_ctx *pipe_ctx) |
| { |
| struct timing_generator *tg = pipe_ctx->stream_res.tg; |
| int start_line = get_vupdate_offset_from_vsync(pipe_ctx); |
| |
| if (start_line < 0) |
| start_line = 0; |
| |
| if (tg->funcs->setup_vertical_interrupt2) |
| tg->funcs->setup_vertical_interrupt2(tg, start_line); |
| } |
| |
| static void dcn20_reset_back_end_for_pipe( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| int i; |
| DC_LOGGER_INIT(dc->ctx->logger); |
| if (pipe_ctx->stream_res.stream_enc == NULL) { |
| pipe_ctx->stream = NULL; |
| return; |
| } |
| |
| if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| /* DPMS may already disable */ |
| if (!pipe_ctx->stream->dpms_off) |
| core_link_disable_stream(pipe_ctx, FREE_ACQUIRED_RESOURCE); |
| else if (pipe_ctx->stream_res.audio) { |
| dc->hwss.disable_audio_stream(pipe_ctx, FREE_ACQUIRED_RESOURCE); |
| } |
| } |
| #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT |
| else if (pipe_ctx->stream_res.dsc) |
| dp_set_dsc_enable(pipe_ctx, false); |
| #endif |
| |
| /* by upper caller loop, parent pipe: pipe0, will be reset last. |
| * back end share by all pipes and will be disable only when disable |
| * parent pipe. |
| */ |
| if (pipe_ctx->top_pipe == NULL) { |
| pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg); |
| |
| pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, false); |
| if (pipe_ctx->stream_res.tg->funcs->set_odm_bypass) |
| pipe_ctx->stream_res.tg->funcs->set_odm_bypass( |
| pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) |
| if (&dc->current_state->res_ctx.pipe_ctx[i] == pipe_ctx) |
| break; |
| |
| if (i == dc->res_pool->pipe_count) |
| return; |
| |
| pipe_ctx->stream = NULL; |
| DC_LOG_DEBUG("Reset back end for pipe %d, tg:%d\n", |
| pipe_ctx->pipe_idx, pipe_ctx->stream_res.tg->inst); |
| } |
| |
| static void dcn20_reset_hw_ctx_wrap( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| int i; |
| |
| /* Reset Back End*/ |
| for (i = dc->res_pool->pipe_count - 1; i >= 0 ; i--) { |
| struct pipe_ctx *pipe_ctx_old = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| if (!pipe_ctx_old->stream) |
| continue; |
| |
| if (pipe_ctx_old->top_pipe) |
| continue; |
| |
| if (!pipe_ctx->stream || |
| pipe_need_reprogram(pipe_ctx_old, pipe_ctx)) { |
| struct clock_source *old_clk = pipe_ctx_old->clock_source; |
| |
| dcn20_reset_back_end_for_pipe(dc, pipe_ctx_old, dc->current_state); |
| if (dc->hwss.enable_stream_gating) |
| dc->hwss.enable_stream_gating(dc, pipe_ctx); |
| if (old_clk) |
| old_clk->funcs->cs_power_down(old_clk); |
| } |
| } |
| } |
| |
| static void dcn20_update_mpcc(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| struct mpcc_blnd_cfg blnd_cfg = { {0} }; |
| bool per_pixel_alpha = pipe_ctx->plane_state->per_pixel_alpha && pipe_ctx->bottom_pipe; |
| int mpcc_id; |
| struct mpcc *new_mpcc; |
| struct mpc *mpc = dc->res_pool->mpc; |
| struct mpc_tree *mpc_tree_params = &(pipe_ctx->stream_res.opp->mpc_tree_params); |
| |
| // input to MPCC is always RGB, by default leave black_color at 0 |
| if (dc->debug.visual_confirm == VISUAL_CONFIRM_HDR) { |
| dcn10_get_hdr_visual_confirm_color( |
| pipe_ctx, &blnd_cfg.black_color); |
| } else if (dc->debug.visual_confirm == VISUAL_CONFIRM_SURFACE) { |
| dcn10_get_surface_visual_confirm_color( |
| pipe_ctx, &blnd_cfg.black_color); |
| } |
| |
| if (per_pixel_alpha) |
| blnd_cfg.alpha_mode = MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA; |
| else |
| blnd_cfg.alpha_mode = MPCC_ALPHA_BLEND_MODE_GLOBAL_ALPHA; |
| |
| blnd_cfg.overlap_only = false; |
| blnd_cfg.global_gain = 0xff; |
| |
| if (pipe_ctx->plane_state->global_alpha) |
| blnd_cfg.global_alpha = pipe_ctx->plane_state->global_alpha_value; |
| else |
| blnd_cfg.global_alpha = 0xff; |
| |
| blnd_cfg.background_color_bpc = 4; |
| blnd_cfg.bottom_gain_mode = 0; |
| blnd_cfg.top_gain = 0x1f000; |
| blnd_cfg.bottom_inside_gain = 0x1f000; |
| blnd_cfg.bottom_outside_gain = 0x1f000; |
| blnd_cfg.pre_multiplied_alpha = per_pixel_alpha; |
| |
| /* |
| * TODO: remove hack |
| * Note: currently there is a bug in init_hw such that |
| * on resume from hibernate, BIOS sets up MPCC0, and |
| * we do mpcc_remove but the mpcc cannot go to idle |
| * after remove. This cause us to pick mpcc1 here, |
| * which causes a pstate hang for yet unknown reason. |
| */ |
| mpcc_id = hubp->inst; |
| |
| /* If there is no full update, don't need to touch MPC tree*/ |
| if (!pipe_ctx->plane_state->update_flags.bits.full_update) { |
| mpc->funcs->update_blending(mpc, &blnd_cfg, mpcc_id); |
| return; |
| } |
| |
| /* check if this MPCC is already being used */ |
| new_mpcc = mpc->funcs->get_mpcc_for_dpp(mpc_tree_params, mpcc_id); |
| /* remove MPCC if being used */ |
| if (new_mpcc != NULL) |
| mpc->funcs->remove_mpcc(mpc, mpc_tree_params, new_mpcc); |
| else |
| if (dc->debug.sanity_checks) |
| mpc->funcs->assert_mpcc_idle_before_connect( |
| dc->res_pool->mpc, mpcc_id); |
| |
| /* Call MPC to insert new plane */ |
| new_mpcc = mpc->funcs->insert_plane(dc->res_pool->mpc, |
| mpc_tree_params, |
| &blnd_cfg, |
| NULL, |
| NULL, |
| hubp->inst, |
| mpcc_id); |
| |
| ASSERT(new_mpcc != NULL); |
| hubp->opp_id = pipe_ctx->stream_res.opp->inst; |
| hubp->mpcc_id = mpcc_id; |
| } |
| |
| static int find_free_gsl_group(const struct dc *dc) |
| { |
| if (dc->res_pool->gsl_groups.gsl_0 == 0) |
| return 1; |
| if (dc->res_pool->gsl_groups.gsl_1 == 0) |
| return 2; |
| if (dc->res_pool->gsl_groups.gsl_2 == 0) |
| return 3; |
| |
| return 0; |
| } |
| |
| /* NOTE: This is not a generic setup_gsl function (hence the suffix as_lock) |
| * This is only used to lock pipes in pipe splitting case with immediate flip |
| * Ordinary MPC/OTG locks suppress VUPDATE which doesn't help with immediate, |
| * so we get tearing with freesync since we cannot flip multiple pipes |
| * atomically. |
| * We use GSL for this: |
| * - immediate flip: find first available GSL group if not already assigned |
| * program gsl with that group, set current OTG as master |
| * and always us 0x4 = AND of flip_ready from all pipes |
| * - vsync flip: disable GSL if used |
| * |
| * Groups in stream_res are stored as +1 from HW registers, i.e. |
| * gsl_0 <=> pipe_ctx->stream_res.gsl_group == 1 |
| * Using a magic value like -1 would require tracking all inits/resets |
| */ |
| void dcn20_setup_gsl_group_as_lock( |
| const struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| bool enable) |
| { |
| struct gsl_params gsl; |
| int group_idx; |
| |
| memset(&gsl, 0, sizeof(struct gsl_params)); |
| |
| if (enable) { |
| /* return if group already assigned since GSL was set up |
| * for vsync flip, we would unassign so it can't be "left over" |
| */ |
| if (pipe_ctx->stream_res.gsl_group > 0) |
| return; |
| |
| group_idx = find_free_gsl_group(dc); |
| ASSERT(group_idx != 0); |
| pipe_ctx->stream_res.gsl_group = group_idx; |
| |
| /* set gsl group reg field and mark resource used */ |
| switch (group_idx) { |
| case 1: |
| gsl.gsl0_en = 1; |
| dc->res_pool->gsl_groups.gsl_0 = 1; |
| break; |
| case 2: |
| gsl.gsl1_en = 1; |
| dc->res_pool->gsl_groups.gsl_1 = 1; |
| break; |
| case 3: |
| gsl.gsl2_en = 1; |
| dc->res_pool->gsl_groups.gsl_2 = 1; |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| return; // invalid case |
| } |
| gsl.gsl_master_en = 1; |
| } else { |
| group_idx = pipe_ctx->stream_res.gsl_group; |
| if (group_idx == 0) |
| return; // if not in use, just return |
| |
| pipe_ctx->stream_res.gsl_group = 0; |
| |
| /* unset gsl group reg field and mark resource free */ |
| switch (group_idx) { |
| case 1: |
| gsl.gsl0_en = 0; |
| dc->res_pool->gsl_groups.gsl_0 = 0; |
| break; |
| case 2: |
| gsl.gsl1_en = 0; |
| dc->res_pool->gsl_groups.gsl_1 = 0; |
| break; |
| case 3: |
| gsl.gsl2_en = 0; |
| dc->res_pool->gsl_groups.gsl_2 = 0; |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| return; |
| } |
| gsl.gsl_master_en = 0; |
| } |
| |
| /* at this point we want to program whether it's to enable or disable */ |
| if (pipe_ctx->stream_res.tg->funcs->set_gsl != NULL && |
| pipe_ctx->stream_res.tg->funcs->set_gsl_source_select != NULL) { |
| pipe_ctx->stream_res.tg->funcs->set_gsl( |
| pipe_ctx->stream_res.tg, |
| &gsl); |
| |
| pipe_ctx->stream_res.tg->funcs->set_gsl_source_select( |
| pipe_ctx->stream_res.tg, group_idx, enable ? 4 : 0); |
| } else |
| BREAK_TO_DEBUGGER(); |
| } |
| |
| static void dcn20_set_flip_control_gsl( |
| struct pipe_ctx *pipe_ctx, |
| bool flip_immediate) |
| { |
| if (pipe_ctx && pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_control_surface_gsl) |
| pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_control_surface_gsl( |
| pipe_ctx->plane_res.hubp, flip_immediate); |
| |
| } |
| |
| void dcn20_hw_sequencer_construct(struct dc *dc) |
| { |
| dcn10_hw_sequencer_construct(dc); |
| dc->hwss.init_hw = dcn20_init_hw; |
| dc->hwss.init_pipes = NULL; |
| dc->hwss.unblank_stream = dcn20_unblank_stream; |
| dc->hwss.update_plane_addr = dcn20_update_plane_addr; |
| dc->hwss.disable_plane = dcn20_disable_plane, |
| dc->hwss.enable_stream_timing = dcn20_enable_stream_timing; |
| dc->hwss.program_triplebuffer = dcn20_program_tripleBuffer; |
| dc->hwss.set_input_transfer_func = dcn20_set_input_transfer_func; |
| dc->hwss.set_output_transfer_func = dcn20_set_output_transfer_func; |
| dc->hwss.apply_ctx_for_surface = dcn20_apply_ctx_for_surface; |
| dc->hwss.pipe_control_lock = dcn20_pipe_control_lock; |
| dc->hwss.pipe_control_lock_global = dcn20_pipe_control_lock_global; |
| dc->hwss.optimize_bandwidth = dcn20_optimize_bandwidth; |
| dc->hwss.prepare_bandwidth = dcn20_prepare_bandwidth; |
| dc->hwss.update_bandwidth = dcn20_update_bandwidth; |
| dc->hwss.enable_writeback = dcn20_enable_writeback; |
| dc->hwss.disable_writeback = dcn20_disable_writeback; |
| dc->hwss.program_output_csc = dcn20_program_output_csc; |
| dc->hwss.update_odm = dcn20_update_odm; |
| dc->hwss.blank_pixel_data = dcn20_blank_pixel_data; |
| dc->hwss.dmdata_status_done = dcn20_dmdata_status_done; |
| dc->hwss.disable_stream = dcn20_disable_stream; |
| dc->hwss.init_sys_ctx = dcn20_init_sys_ctx; |
| dc->hwss.init_vm_ctx = dcn20_init_vm_ctx; |
| dc->hwss.disable_stream_gating = dcn20_disable_stream_gating; |
| dc->hwss.enable_stream_gating = dcn20_enable_stream_gating; |
| dc->hwss.setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt; |
| dc->hwss.reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap; |
| dc->hwss.update_mpcc = dcn20_update_mpcc; |
| dc->hwss.set_flip_control_gsl = dcn20_set_flip_control_gsl; |
| dc->hwss.did_underflow_occur = dcn10_did_underflow_occur; |
| } |