| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Linux for s390 qdio support, buffer handling, qdio API and module support. |
| * |
| * Copyright IBM Corp. 2000, 2008 |
| * Author(s): Utz Bacher <utz.bacher@de.ibm.com> |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/gfp.h> |
| #include <linux/io.h> |
| #include <linux/atomic.h> |
| #include <asm/debug.h> |
| #include <asm/qdio.h> |
| #include <asm/ipl.h> |
| |
| #include "cio.h" |
| #include "css.h" |
| #include "device.h" |
| #include "qdio.h" |
| #include "qdio_debug.h" |
| |
| MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\ |
| "Jan Glauber <jang@linux.vnet.ibm.com>"); |
| MODULE_DESCRIPTION("QDIO base support"); |
| MODULE_LICENSE("GPL"); |
| |
| static inline int do_siga_sync(unsigned long schid, |
| unsigned int out_mask, unsigned int in_mask, |
| unsigned int fc) |
| { |
| register unsigned long __fc asm ("0") = fc; |
| register unsigned long __schid asm ("1") = schid; |
| register unsigned long out asm ("2") = out_mask; |
| register unsigned long in asm ("3") = in_mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); |
| return cc; |
| } |
| |
| static inline int do_siga_input(unsigned long schid, unsigned int mask, |
| unsigned int fc) |
| { |
| register unsigned long __fc asm ("0") = fc; |
| register unsigned long __schid asm ("1") = schid; |
| register unsigned long __mask asm ("2") = mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (__mask) : "cc"); |
| return cc; |
| } |
| |
| /** |
| * do_siga_output - perform SIGA-w/wt function |
| * @schid: subchannel id or in case of QEBSM the subchannel token |
| * @mask: which output queues to process |
| * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer |
| * @fc: function code to perform |
| * @aob: asynchronous operation block |
| * |
| * Returns condition code. |
| * Note: For IQDC unicast queues only the highest priority queue is processed. |
| */ |
| static inline int do_siga_output(unsigned long schid, unsigned long mask, |
| unsigned int *bb, unsigned int fc, |
| unsigned long aob) |
| { |
| register unsigned long __fc asm("0") = fc; |
| register unsigned long __schid asm("1") = schid; |
| register unsigned long __mask asm("2") = mask; |
| register unsigned long __aob asm("3") = aob; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc), "+d" (__fc), "+d" (__aob) |
| : "d" (__schid), "d" (__mask) |
| : "cc"); |
| *bb = __fc >> 31; |
| return cc; |
| } |
| |
| /** |
| * qdio_do_eqbs - extract buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: state of the extracted buffers |
| * @start: buffer number to start at |
| * @count: count of buffers to examine |
| * @auto_ack: automatically acknowledge buffers |
| * |
| * Returns the number of successfully extracted equal buffer states. |
| * Stops processing if a state is different from the last buffers state. |
| */ |
| static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, |
| int start, int count, int auto_ack) |
| { |
| int tmp_count = count, tmp_start = start, nr = q->nr; |
| unsigned int ccq = 0; |
| |
| qperf_inc(q, eqbs); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count, |
| auto_ack); |
| |
| switch (ccq) { |
| case 0: |
| case 32: |
| /* all done, or next buffer state different */ |
| return count - tmp_count; |
| case 96: |
| /* not all buffers processed */ |
| qperf_inc(q, eqbs_partial); |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS part:%02x", |
| tmp_count); |
| return count - tmp_count; |
| case 97: |
| /* no buffer processed */ |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq); |
| goto again; |
| default: |
| DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq); |
| DBF_ERROR("%4x EQBS ERROR", SCH_NO(q)); |
| DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_GET_BUF_STATE, q->nr, |
| q->first_to_kick, count, q->irq_ptr->int_parm); |
| return 0; |
| } |
| } |
| |
| /** |
| * qdio_do_sqbs - set buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: new state of the buffers |
| * @start: first buffer number to change |
| * @count: how many buffers to change |
| * |
| * Returns the number of successfully changed buffers. |
| * Does retrying until the specified count of buffer states is set or an |
| * error occurs. |
| */ |
| static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, |
| int count) |
| { |
| unsigned int ccq = 0; |
| int tmp_count = count, tmp_start = start; |
| int nr = q->nr; |
| |
| if (!count) |
| return 0; |
| qperf_inc(q, sqbs); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); |
| |
| switch (ccq) { |
| case 0: |
| case 32: |
| /* all done, or active buffer adapter-owned */ |
| WARN_ON_ONCE(tmp_count); |
| return count - tmp_count; |
| case 96: |
| /* not all buffers processed */ |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq); |
| qperf_inc(q, sqbs_partial); |
| goto again; |
| default: |
| DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq); |
| DBF_ERROR("%4x SQBS ERROR", SCH_NO(q)); |
| DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_SET_BUF_STATE, q->nr, |
| q->first_to_kick, count, q->irq_ptr->int_parm); |
| return 0; |
| } |
| } |
| |
| /* |
| * Returns number of examined buffers and their common state in *state. |
| * Requested number of buffers-to-examine must be > 0. |
| */ |
| static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state, unsigned int count, |
| int auto_ack, int merge_pending) |
| { |
| unsigned char __state = 0; |
| int i = 1; |
| |
| if (is_qebsm(q)) |
| return qdio_do_eqbs(q, state, bufnr, count, auto_ack); |
| |
| /* get initial state: */ |
| __state = q->slsb.val[bufnr]; |
| |
| /* Bail out early if there is no work on the queue: */ |
| if (__state & SLSB_OWNER_CU) |
| goto out; |
| |
| if (merge_pending && __state == SLSB_P_OUTPUT_PENDING) |
| __state = SLSB_P_OUTPUT_EMPTY; |
| |
| for (; i < count; i++) { |
| bufnr = next_buf(bufnr); |
| |
| /* merge PENDING into EMPTY: */ |
| if (merge_pending && |
| q->slsb.val[bufnr] == SLSB_P_OUTPUT_PENDING && |
| __state == SLSB_P_OUTPUT_EMPTY) |
| continue; |
| |
| /* stop if next state differs from initial state: */ |
| if (q->slsb.val[bufnr] != __state) |
| break; |
| } |
| |
| out: |
| *state = __state; |
| return i; |
| } |
| |
| static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state, int auto_ack) |
| { |
| return get_buf_states(q, bufnr, state, 1, auto_ack, 0); |
| } |
| |
| /* wrap-around safe setting of slsb states, returns number of changed buffers */ |
| static inline int set_buf_states(struct qdio_q *q, int bufnr, |
| unsigned char state, int count) |
| { |
| int i; |
| |
| if (is_qebsm(q)) |
| return qdio_do_sqbs(q, state, bufnr, count); |
| |
| for (i = 0; i < count; i++) { |
| xchg(&q->slsb.val[bufnr], state); |
| bufnr = next_buf(bufnr); |
| } |
| return count; |
| } |
| |
| static inline int set_buf_state(struct qdio_q *q, int bufnr, |
| unsigned char state) |
| { |
| return set_buf_states(q, bufnr, state, 1); |
| } |
| |
| /* set slsb states to initial state */ |
| static void qdio_init_buf_states(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| for_each_output_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| } |
| |
| static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output, |
| unsigned int input) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_SYNC; |
| int cc; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr); |
| qperf_inc(q, siga_sync); |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| |
| cc = do_siga_sync(schid, output, input, fc); |
| if (unlikely(cc)) |
| DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc); |
| return (cc) ? -EIO : 0; |
| } |
| |
| static inline int qdio_siga_sync_q(struct qdio_q *q) |
| { |
| if (q->is_input_q) |
| return qdio_siga_sync(q, 0, q->mask); |
| else |
| return qdio_siga_sync(q, q->mask, 0); |
| } |
| |
| static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit, |
| unsigned long aob) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_WRITE; |
| u64 start_time = 0; |
| int retries = 0, cc; |
| unsigned long laob = 0; |
| |
| if (aob) { |
| fc = QDIO_SIGA_WRITEQ; |
| laob = aob; |
| } |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| again: |
| cc = do_siga_output(schid, q->mask, busy_bit, fc, laob); |
| |
| /* hipersocket busy condition */ |
| if (unlikely(*busy_bit)) { |
| retries++; |
| |
| if (!start_time) { |
| start_time = get_tod_clock_fast(); |
| goto again; |
| } |
| if (get_tod_clock_fast() - start_time < QDIO_BUSY_BIT_PATIENCE) |
| goto again; |
| } |
| if (retries) { |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, |
| "%4x cc2 BB1:%1d", SCH_NO(q), q->nr); |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "count:%u", retries); |
| } |
| return cc; |
| } |
| |
| static inline int qdio_siga_input(struct qdio_q *q) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_READ; |
| int cc; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr); |
| qperf_inc(q, siga_read); |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| |
| cc = do_siga_input(schid, q->mask, fc); |
| if (unlikely(cc)) |
| DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc); |
| return (cc) ? -EIO : 0; |
| } |
| |
| #define qdio_siga_sync_out(q) qdio_siga_sync(q, ~0U, 0) |
| #define qdio_siga_sync_all(q) qdio_siga_sync(q, ~0U, ~0U) |
| |
| static inline void qdio_sync_queues(struct qdio_q *q) |
| { |
| /* PCI capable outbound queues will also be scanned so sync them too */ |
| if (pci_out_supported(q->irq_ptr)) |
| qdio_siga_sync_all(q); |
| else |
| qdio_siga_sync_q(q); |
| } |
| |
| int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state) |
| { |
| if (need_siga_sync(q)) |
| qdio_siga_sync_q(q); |
| return get_buf_state(q, bufnr, state, 0); |
| } |
| |
| static inline void qdio_stop_polling(struct qdio_q *q) |
| { |
| if (!q->u.in.polling) |
| return; |
| |
| q->u.in.polling = 0; |
| qperf_inc(q, stop_polling); |
| |
| /* show the card that we are not polling anymore */ |
| if (is_qebsm(q)) { |
| set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT, |
| q->u.in.ack_count); |
| q->u.in.ack_count = 0; |
| } else |
| set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT); |
| } |
| |
| static inline void account_sbals(struct qdio_q *q, unsigned int count) |
| { |
| int pos; |
| |
| q->q_stats.nr_sbal_total += count; |
| if (count == QDIO_MAX_BUFFERS_MASK) { |
| q->q_stats.nr_sbals[7]++; |
| return; |
| } |
| pos = ilog2(count); |
| q->q_stats.nr_sbals[pos]++; |
| } |
| |
| static void process_buffer_error(struct qdio_q *q, unsigned int start, |
| int count) |
| { |
| unsigned char state = (q->is_input_q) ? SLSB_P_INPUT_NOT_INIT : |
| SLSB_P_OUTPUT_NOT_INIT; |
| |
| q->qdio_error = QDIO_ERROR_SLSB_STATE; |
| |
| /* special handling for no target buffer empty */ |
| if (queue_type(q) == QDIO_IQDIO_QFMT && !q->is_input_q && |
| q->sbal[start]->element[15].sflags == 0x10) { |
| qperf_inc(q, target_full); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x", start); |
| goto set; |
| } |
| |
| DBF_ERROR("%4x BUF ERROR", SCH_NO(q)); |
| DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr); |
| DBF_ERROR("FTC:%3d C:%3d", start, count); |
| DBF_ERROR("F14:%2x F15:%2x", |
| q->sbal[start]->element[14].sflags, |
| q->sbal[start]->element[15].sflags); |
| |
| set: |
| /* |
| * Interrupts may be avoided as long as the error is present |
| * so change the buffer state immediately to avoid starvation. |
| */ |
| set_buf_states(q, start, state, count); |
| } |
| |
| static inline void inbound_primed(struct qdio_q *q, unsigned int start, |
| int count) |
| { |
| int new; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim:%1d %02x", q->nr, count); |
| |
| /* for QEBSM the ACK was already set by EQBS */ |
| if (is_qebsm(q)) { |
| if (!q->u.in.polling) { |
| q->u.in.polling = 1; |
| q->u.in.ack_count = count; |
| q->u.in.ack_start = start; |
| return; |
| } |
| |
| /* delete the previous ACK's */ |
| set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT, |
| q->u.in.ack_count); |
| q->u.in.ack_count = count; |
| q->u.in.ack_start = start; |
| return; |
| } |
| |
| /* |
| * ACK the newest buffer. The ACK will be removed in qdio_stop_polling |
| * or by the next inbound run. |
| */ |
| new = add_buf(start, count - 1); |
| if (q->u.in.polling) { |
| /* reset the previous ACK but first set the new one */ |
| set_buf_state(q, new, SLSB_P_INPUT_ACK); |
| set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT); |
| } else { |
| q->u.in.polling = 1; |
| set_buf_state(q, new, SLSB_P_INPUT_ACK); |
| } |
| |
| q->u.in.ack_start = new; |
| count--; |
| if (!count) |
| return; |
| /* need to change ALL buffers to get more interrupts */ |
| set_buf_states(q, start, SLSB_P_INPUT_NOT_INIT, count); |
| } |
| |
| static int get_inbound_buffer_frontier(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| int count; |
| |
| q->timestamp = get_tod_clock_fast(); |
| |
| /* |
| * Don't check 128 buffers, as otherwise qdio_inbound_q_moved |
| * would return 0. |
| */ |
| count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); |
| if (!count) |
| return 0; |
| |
| /* |
| * No siga sync here, as a PCI or we after a thin interrupt |
| * already sync'ed the queues. |
| */ |
| count = get_buf_states(q, start, &state, count, 1, 0); |
| if (!count) |
| return 0; |
| |
| switch (state) { |
| case SLSB_P_INPUT_PRIMED: |
| inbound_primed(q, start, count); |
| if (atomic_sub_return(count, &q->nr_buf_used) == 0) |
| qperf_inc(q, inbound_queue_full); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals(q, count); |
| return count; |
| case SLSB_P_INPUT_ERROR: |
| process_buffer_error(q, start, count); |
| if (atomic_sub_return(count, &q->nr_buf_used) == 0) |
| qperf_inc(q, inbound_queue_full); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals_error(q, count); |
| return count; |
| case SLSB_CU_INPUT_EMPTY: |
| case SLSB_P_INPUT_NOT_INIT: |
| case SLSB_P_INPUT_ACK: |
| if (q->irq_ptr->perf_stat_enabled) |
| q->q_stats.nr_sbal_nop++; |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in nop:%1d %#02x", |
| q->nr, start); |
| return 0; |
| default: |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| } |
| |
| static int qdio_inbound_q_moved(struct qdio_q *q, unsigned int start) |
| { |
| int count; |
| |
| count = get_inbound_buffer_frontier(q, start); |
| |
| if (count && !is_thinint_irq(q->irq_ptr) && MACHINE_IS_LPAR) |
| q->u.in.timestamp = get_tod_clock(); |
| |
| return count; |
| } |
| |
| static inline int qdio_inbound_q_done(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| |
| if (!atomic_read(&q->nr_buf_used)) |
| return 1; |
| |
| if (need_siga_sync(q)) |
| qdio_siga_sync_q(q); |
| get_buf_state(q, start, &state, 0); |
| |
| if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR) |
| /* more work coming */ |
| return 0; |
| |
| if (is_thinint_irq(q->irq_ptr)) |
| return 1; |
| |
| /* don't poll under z/VM */ |
| if (MACHINE_IS_VM) |
| return 1; |
| |
| /* |
| * At this point we know, that inbound first_to_check |
| * has (probably) not moved (see qdio_inbound_processing). |
| */ |
| if (get_tod_clock_fast() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) { |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in done:%02x", start); |
| return 1; |
| } else |
| return 0; |
| } |
| |
| static inline void qdio_handle_aobs(struct qdio_q *q, int start, int count) |
| { |
| unsigned char state = 0; |
| int j, b = start; |
| |
| for (j = 0; j < count; ++j) { |
| get_buf_state(q, b, &state, 0); |
| if (state == SLSB_P_OUTPUT_PENDING) { |
| struct qaob *aob = q->u.out.aobs[b]; |
| if (aob == NULL) |
| continue; |
| |
| q->u.out.sbal_state[b].flags |= |
| QDIO_OUTBUF_STATE_FLAG_PENDING; |
| q->u.out.aobs[b] = NULL; |
| } |
| b = next_buf(b); |
| } |
| } |
| |
| static inline unsigned long qdio_aob_for_buffer(struct qdio_output_q *q, |
| int bufnr) |
| { |
| unsigned long phys_aob = 0; |
| |
| if (!q->aobs[bufnr]) { |
| struct qaob *aob = qdio_allocate_aob(); |
| q->aobs[bufnr] = aob; |
| } |
| if (q->aobs[bufnr]) { |
| q->aobs[bufnr]->user1 = (u64) q->sbal_state[bufnr].user; |
| phys_aob = virt_to_phys(q->aobs[bufnr]); |
| WARN_ON_ONCE(phys_aob & 0xFF); |
| } |
| |
| q->sbal_state[bufnr].flags = 0; |
| return phys_aob; |
| } |
| |
| static void qdio_kick_handler(struct qdio_q *q, unsigned int count) |
| { |
| int start = q->first_to_kick; |
| |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| if (q->is_input_q) { |
| qperf_inc(q, inbound_handler); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count); |
| } else { |
| qperf_inc(q, outbound_handler); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x", |
| start, count); |
| if (q->u.out.use_cq) |
| qdio_handle_aobs(q, start, count); |
| } |
| |
| q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count, |
| q->irq_ptr->int_parm); |
| |
| /* for the next time */ |
| q->first_to_kick = add_buf(start, count); |
| q->qdio_error = 0; |
| } |
| |
| static inline int qdio_tasklet_schedule(struct qdio_q *q) |
| { |
| if (likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) { |
| tasklet_schedule(&q->tasklet); |
| return 0; |
| } |
| return -EPERM; |
| } |
| |
| static void __qdio_inbound_processing(struct qdio_q *q) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| qperf_inc(q, tasklet_inbound); |
| |
| count = qdio_inbound_q_moved(q, start); |
| if (count == 0) |
| return; |
| |
| start = add_buf(start, count); |
| q->first_to_check = start; |
| qdio_kick_handler(q, count); |
| |
| if (!qdio_inbound_q_done(q, start)) { |
| /* means poll time is not yet over */ |
| qperf_inc(q, tasklet_inbound_resched); |
| if (!qdio_tasklet_schedule(q)) |
| return; |
| } |
| |
| qdio_stop_polling(q); |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (!qdio_inbound_q_done(q, start)) { |
| qperf_inc(q, tasklet_inbound_resched2); |
| qdio_tasklet_schedule(q); |
| } |
| } |
| |
| void qdio_inbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_inbound_processing(q); |
| } |
| |
| static int get_outbound_buffer_frontier(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| int count; |
| |
| q->timestamp = get_tod_clock_fast(); |
| |
| if (need_siga_sync(q)) |
| if (((queue_type(q) != QDIO_IQDIO_QFMT) && |
| !pci_out_supported(q->irq_ptr)) || |
| (queue_type(q) == QDIO_IQDIO_QFMT && |
| multicast_outbound(q))) |
| qdio_siga_sync_q(q); |
| |
| count = atomic_read(&q->nr_buf_used); |
| if (!count) |
| return 0; |
| |
| count = get_buf_states(q, start, &state, count, 0, q->u.out.use_cq); |
| if (!count) |
| return 0; |
| |
| switch (state) { |
| case SLSB_P_OUTPUT_EMPTY: |
| case SLSB_P_OUTPUT_PENDING: |
| /* the adapter got it */ |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, |
| "out empty:%1d %02x", q->nr, count); |
| |
| atomic_sub(count, &q->nr_buf_used); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals(q, count); |
| return count; |
| case SLSB_P_OUTPUT_ERROR: |
| process_buffer_error(q, start, count); |
| atomic_sub(count, &q->nr_buf_used); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals_error(q, count); |
| return count; |
| case SLSB_CU_OUTPUT_PRIMED: |
| /* the adapter has not fetched the output yet */ |
| if (q->irq_ptr->perf_stat_enabled) |
| q->q_stats.nr_sbal_nop++; |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out primed:%1d", |
| q->nr); |
| return 0; |
| case SLSB_P_OUTPUT_NOT_INIT: |
| case SLSB_P_OUTPUT_HALTED: |
| return 0; |
| default: |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| } |
| |
| /* all buffers processed? */ |
| static inline int qdio_outbound_q_done(struct qdio_q *q) |
| { |
| return atomic_read(&q->nr_buf_used) == 0; |
| } |
| |
| static inline int qdio_outbound_q_moved(struct qdio_q *q, unsigned int start) |
| { |
| int count; |
| |
| count = get_outbound_buffer_frontier(q, start); |
| |
| if (count) |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out moved:%1d", q->nr); |
| |
| return count; |
| } |
| |
| static int qdio_kick_outbound_q(struct qdio_q *q, unsigned long aob) |
| { |
| int retries = 0, cc; |
| unsigned int busy_bit; |
| |
| if (!need_siga_out(q)) |
| return 0; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr); |
| retry: |
| qperf_inc(q, siga_write); |
| |
| cc = qdio_siga_output(q, &busy_bit, aob); |
| switch (cc) { |
| case 0: |
| break; |
| case 2: |
| if (busy_bit) { |
| while (++retries < QDIO_BUSY_BIT_RETRIES) { |
| mdelay(QDIO_BUSY_BIT_RETRY_DELAY); |
| goto retry; |
| } |
| DBF_ERROR("%4x cc2 BBC:%1d", SCH_NO(q), q->nr); |
| cc = -EBUSY; |
| } else { |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w cc2:%1d", q->nr); |
| cc = -ENOBUFS; |
| } |
| break; |
| case 1: |
| case 3: |
| DBF_ERROR("%4x SIGA-W:%1d", SCH_NO(q), cc); |
| cc = -EIO; |
| break; |
| } |
| if (retries) { |
| DBF_ERROR("%4x cc2 BB2:%1d", SCH_NO(q), q->nr); |
| DBF_ERROR("count:%u", retries); |
| } |
| return cc; |
| } |
| |
| static void __qdio_outbound_processing(struct qdio_q *q) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| qperf_inc(q, tasklet_outbound); |
| WARN_ON_ONCE(atomic_read(&q->nr_buf_used) < 0); |
| |
| count = qdio_outbound_q_moved(q, start); |
| if (count) { |
| q->first_to_check = add_buf(start, count); |
| qdio_kick_handler(q, count); |
| } |
| |
| if (queue_type(q) == QDIO_ZFCP_QFMT && !pci_out_supported(q->irq_ptr) && |
| !qdio_outbound_q_done(q)) |
| goto sched; |
| |
| if (q->u.out.pci_out_enabled) |
| return; |
| |
| /* |
| * Now we know that queue type is either qeth without pci enabled |
| * or HiperSockets. Make sure buffer switch from PRIMED to EMPTY |
| * is noticed and outbound_handler is called after some time. |
| */ |
| if (qdio_outbound_q_done(q)) |
| del_timer_sync(&q->u.out.timer); |
| else |
| if (!timer_pending(&q->u.out.timer) && |
| likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) |
| mod_timer(&q->u.out.timer, jiffies + 10 * HZ); |
| return; |
| |
| sched: |
| qdio_tasklet_schedule(q); |
| } |
| |
| /* outbound tasklet */ |
| void qdio_outbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_outbound_processing(q); |
| } |
| |
| void qdio_outbound_timer(struct timer_list *t) |
| { |
| struct qdio_q *q = from_timer(q, t, u.out.timer); |
| |
| qdio_tasklet_schedule(q); |
| } |
| |
| static inline void qdio_check_outbound_pci_queues(struct qdio_irq *irq) |
| { |
| struct qdio_q *out; |
| int i; |
| |
| if (!pci_out_supported(irq)) |
| return; |
| |
| for_each_output_queue(irq, out, i) |
| if (!qdio_outbound_q_done(out)) |
| qdio_tasklet_schedule(out); |
| } |
| |
| static void __tiqdio_inbound_processing(struct qdio_q *q) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| qperf_inc(q, tasklet_inbound); |
| if (need_siga_sync(q) && need_siga_sync_after_ai(q)) |
| qdio_sync_queues(q); |
| |
| /* The interrupt could be caused by a PCI request: */ |
| qdio_check_outbound_pci_queues(q->irq_ptr); |
| |
| count = qdio_inbound_q_moved(q, start); |
| if (count == 0) |
| return; |
| |
| start = add_buf(start, count); |
| q->first_to_check = start; |
| qdio_kick_handler(q, count); |
| |
| if (!qdio_inbound_q_done(q, start)) { |
| qperf_inc(q, tasklet_inbound_resched); |
| if (!qdio_tasklet_schedule(q)) |
| return; |
| } |
| |
| qdio_stop_polling(q); |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (!qdio_inbound_q_done(q, start)) { |
| qperf_inc(q, tasklet_inbound_resched2); |
| qdio_tasklet_schedule(q); |
| } |
| } |
| |
| void tiqdio_inbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __tiqdio_inbound_processing(q); |
| } |
| |
| static inline void qdio_set_state(struct qdio_irq *irq_ptr, |
| enum qdio_irq_states state) |
| { |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, "newstate: %1d", state); |
| |
| irq_ptr->state = state; |
| mb(); |
| } |
| |
| static void qdio_irq_check_sense(struct qdio_irq *irq_ptr, struct irb *irb) |
| { |
| if (irb->esw.esw0.erw.cons) { |
| DBF_ERROR("%4x sense:", irq_ptr->schid.sch_no); |
| DBF_ERROR_HEX(irb, 64); |
| DBF_ERROR_HEX(irb->ecw, 64); |
| } |
| } |
| |
| /* PCI interrupt handler */ |
| static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) |
| { |
| int i; |
| struct qdio_q *q; |
| |
| if (unlikely(irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| for_each_input_queue(irq_ptr, q, i) { |
| if (q->u.in.queue_start_poll) { |
| /* skip if polling is enabled or already in work */ |
| if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED, |
| &q->u.in.queue_irq_state)) { |
| qperf_inc(q, int_discarded); |
| continue; |
| } |
| q->u.in.queue_start_poll(q->irq_ptr->cdev, q->nr, |
| q->irq_ptr->int_parm); |
| } else { |
| tasklet_schedule(&q->tasklet); |
| } |
| } |
| |
| if (!pci_out_supported(irq_ptr)) |
| return; |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| if (qdio_outbound_q_done(q)) |
| continue; |
| if (need_siga_sync(q) && need_siga_sync_out_after_pci(q)) |
| qdio_siga_sync_q(q); |
| qdio_tasklet_schedule(q); |
| } |
| } |
| |
| static void qdio_handle_activate_check(struct ccw_device *cdev, |
| unsigned long intparm, int cstat, int dstat) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct qdio_q *q; |
| int count; |
| |
| DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no); |
| DBF_ERROR("intp :%lx", intparm); |
| DBF_ERROR("ds: %2x cs:%2x", dstat, cstat); |
| |
| if (irq_ptr->nr_input_qs) { |
| q = irq_ptr->input_qs[0]; |
| } else if (irq_ptr->nr_output_qs) { |
| q = irq_ptr->output_qs[0]; |
| } else { |
| dump_stack(); |
| goto no_handler; |
| } |
| |
| count = sub_buf(q->first_to_check, q->first_to_kick); |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE, |
| q->nr, q->first_to_kick, count, irq_ptr->int_parm); |
| no_handler: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| /* |
| * In case of z/VM LGR (Live Guest Migration) QDIO recovery will happen. |
| * Therefore we call the LGR detection function here. |
| */ |
| lgr_info_log(); |
| } |
| |
| static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat, |
| int dstat) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq"); |
| |
| if (cstat) |
| goto error; |
| if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END)) |
| goto error; |
| if (!(dstat & DEV_STAT_DEV_END)) |
| goto error; |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); |
| return; |
| |
| error: |
| DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no); |
| DBF_ERROR("ds: %2x cs:%2x", dstat, cstat); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| } |
| |
| /* qdio interrupt handler */ |
| void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, |
| struct irb *irb) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int cstat, dstat; |
| |
| if (!intparm || !irq_ptr) { |
| ccw_device_get_schid(cdev, &schid); |
| DBF_ERROR("qint:%4x", schid.sch_no); |
| return; |
| } |
| |
| if (irq_ptr->perf_stat_enabled) |
| irq_ptr->perf_stat.qdio_int++; |
| |
| if (IS_ERR(irb)) { |
| DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| wake_up(&cdev->private->wait_q); |
| return; |
| } |
| qdio_irq_check_sense(irq_ptr, irb); |
| cstat = irb->scsw.cmd.cstat; |
| dstat = irb->scsw.cmd.dstat; |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_INACTIVE: |
| qdio_establish_handle_irq(cdev, cstat, dstat); |
| break; |
| case QDIO_IRQ_STATE_CLEANUP: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| break; |
| case QDIO_IRQ_STATE_ESTABLISHED: |
| case QDIO_IRQ_STATE_ACTIVE: |
| if (cstat & SCHN_STAT_PCI) { |
| qdio_int_handler_pci(irq_ptr); |
| return; |
| } |
| if (cstat || dstat) |
| qdio_handle_activate_check(cdev, intparm, cstat, |
| dstat); |
| break; |
| case QDIO_IRQ_STATE_STOPPED: |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| wake_up(&cdev->private->wait_q); |
| } |
| |
| /** |
| * qdio_get_ssqd_desc - get qdio subchannel description |
| * @cdev: ccw device to get description for |
| * @data: where to store the ssqd |
| * |
| * Returns 0 or an error code. The results of the chsc are stored in the |
| * specified structure. |
| */ |
| int qdio_get_ssqd_desc(struct ccw_device *cdev, |
| struct qdio_ssqd_desc *data) |
| { |
| struct subchannel_id schid; |
| |
| if (!cdev || !cdev->private) |
| return -EINVAL; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("get ssqd:%4x", schid.sch_no); |
| return qdio_setup_get_ssqd(NULL, &schid, data); |
| } |
| EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); |
| |
| static void qdio_shutdown_queues(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| tasklet_kill(&q->tasklet); |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| del_timer_sync(&q->u.out.timer); |
| tasklet_kill(&q->tasklet); |
| } |
| } |
| |
| /** |
| * qdio_shutdown - shut down a qdio subchannel |
| * @cdev: associated ccw device |
| * @how: use halt or clear to shutdown |
| */ |
| int qdio_shutdown(struct ccw_device *cdev, int how) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int rc; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| WARN_ON_ONCE(irqs_disabled()); |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qshutdown:%4x", schid.sch_no); |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| /* |
| * Subchannel was already shot down. We cannot prevent being called |
| * twice since cio may trigger a shutdown asynchronously. |
| */ |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return 0; |
| } |
| |
| /* |
| * Indicate that the device is going down. Scheduling the queue |
| * tasklets is forbidden from here on. |
| */ |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| |
| tiqdio_remove_input_queues(irq_ptr); |
| qdio_shutdown_queues(cdev); |
| qdio_shutdown_debug_entries(irq_ptr); |
| |
| /* cleanup subchannel */ |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| |
| if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) |
| rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); |
| else |
| /* default behaviour is halt */ |
| rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); |
| if (rc) { |
| DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4d", rc); |
| goto no_cleanup; |
| } |
| |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, |
| 10 * HZ); |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| |
| no_cleanup: |
| qdio_shutdown_thinint(irq_ptr); |
| |
| /* restore interrupt handler */ |
| if ((void *)cdev->handler == (void *)qdio_int_handler) { |
| cdev->handler = irq_ptr->orig_handler; |
| cdev->private->intparm = 0; |
| } |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| if (rc) |
| return rc; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_shutdown); |
| |
| /** |
| * qdio_free - free data structures for a qdio subchannel |
| * @cdev: associated ccw device |
| */ |
| int qdio_free(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qfree:%4x", schid.sch_no); |
| DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf abandoned"); |
| mutex_lock(&irq_ptr->setup_mutex); |
| |
| irq_ptr->debug_area = NULL; |
| cdev->private->qdio_data = NULL; |
| mutex_unlock(&irq_ptr->setup_mutex); |
| |
| qdio_release_memory(irq_ptr); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_free); |
| |
| /** |
| * qdio_allocate - allocate qdio queues and associated data |
| * @init_data: initialization data |
| */ |
| int qdio_allocate(struct qdio_initialize *init_data) |
| { |
| struct subchannel_id schid; |
| struct qdio_irq *irq_ptr; |
| |
| ccw_device_get_schid(init_data->cdev, &schid); |
| DBF_EVENT("qallocate:%4x", schid.sch_no); |
| |
| if ((init_data->no_input_qs && !init_data->input_handler) || |
| (init_data->no_output_qs && !init_data->output_handler)) |
| return -EINVAL; |
| |
| if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) || |
| (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ)) |
| return -EINVAL; |
| |
| if ((!init_data->input_sbal_addr_array) || |
| (!init_data->output_sbal_addr_array)) |
| return -EINVAL; |
| |
| /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */ |
| irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr) |
| goto out_err; |
| |
| mutex_init(&irq_ptr->setup_mutex); |
| if (qdio_allocate_dbf(init_data, irq_ptr)) |
| goto out_rel; |
| |
| /* |
| * Allocate a page for the chsc calls in qdio_establish. |
| * Must be pre-allocated since a zfcp recovery will call |
| * qdio_establish. In case of low memory and swap on a zfcp disk |
| * we may not be able to allocate memory otherwise. |
| */ |
| irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL); |
| if (!irq_ptr->chsc_page) |
| goto out_rel; |
| |
| /* qdr is used in ccw1.cda which is u32 */ |
| irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr->qdr) |
| goto out_rel; |
| |
| if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs, |
| init_data->no_output_qs)) |
| goto out_rel; |
| |
| init_data->cdev->private->qdio_data = irq_ptr; |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| return 0; |
| out_rel: |
| qdio_release_memory(irq_ptr); |
| out_err: |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL_GPL(qdio_allocate); |
| |
| static void qdio_detect_hsicq(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q = irq_ptr->input_qs[0]; |
| int i, use_cq = 0; |
| |
| if (irq_ptr->nr_input_qs > 1 && queue_type(q) == QDIO_IQDIO_QFMT) |
| use_cq = 1; |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| if (use_cq) { |
| if (multicast_outbound(q)) |
| continue; |
| if (qdio_enable_async_operation(&q->u.out) < 0) { |
| use_cq = 0; |
| continue; |
| } |
| } else |
| qdio_disable_async_operation(&q->u.out); |
| } |
| DBF_EVENT("use_cq:%d", use_cq); |
| } |
| |
| /** |
| * qdio_establish - establish queues on a qdio subchannel |
| * @init_data: initialization data |
| */ |
| int qdio_establish(struct qdio_initialize *init_data) |
| { |
| struct ccw_device *cdev = init_data->cdev; |
| struct subchannel_id schid; |
| struct qdio_irq *irq_ptr; |
| int rc; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qestablish:%4x", schid.sch_no); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| qdio_setup_irq(init_data); |
| |
| rc = qdio_establish_thinint(irq_ptr); |
| if (rc) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return rc; |
| } |
| |
| /* establish q */ |
| irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->equeue.count; |
| irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); |
| |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| ccw_device_set_options_mask(cdev, 0); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| if (rc) { |
| DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4x", rc); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return rc; |
| } |
| |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ); |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return -EIO; |
| } |
| |
| qdio_setup_ssqd_info(irq_ptr); |
| |
| qdio_detect_hsicq(irq_ptr); |
| |
| /* qebsm is now setup if available, initialize buffer states */ |
| qdio_init_buf_states(irq_ptr); |
| |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_print_subchannel_info(irq_ptr, cdev); |
| qdio_setup_debug_entries(irq_ptr, cdev); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_establish); |
| |
| /** |
| * qdio_activate - activate queues on a qdio subchannel |
| * @cdev: associated cdev |
| */ |
| int qdio_activate(struct ccw_device *cdev) |
| { |
| struct subchannel_id schid; |
| struct qdio_irq *irq_ptr; |
| int rc; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qactivate:%4x", schid.sch_no); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->aqueue.count; |
| irq_ptr->ccw.cda = 0; |
| |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, |
| 0, DOIO_DENY_PREFETCH); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| if (rc) { |
| DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4x", rc); |
| goto out; |
| } |
| |
| if (is_thinint_irq(irq_ptr)) |
| tiqdio_add_input_queues(irq_ptr); |
| |
| /* wait for subchannel to become active */ |
| msleep(5); |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_STOPPED: |
| case QDIO_IRQ_STATE_ERR: |
| rc = -EIO; |
| break; |
| default: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); |
| rc = 0; |
| } |
| out: |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_activate); |
| |
| static inline int buf_in_between(int bufnr, int start, int count) |
| { |
| int end = add_buf(start, count); |
| |
| if (end > start) { |
| if (bufnr >= start && bufnr < end) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /* wrap-around case */ |
| if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) || |
| (bufnr < end)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /** |
| * handle_inbound - reset processed input buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are emptied |
| */ |
| static int handle_inbound(struct qdio_q *q, unsigned int callflags, |
| int bufnr, int count) |
| { |
| int diff; |
| |
| qperf_inc(q, inbound_call); |
| |
| if (!q->u.in.polling) |
| goto set; |
| |
| /* protect against stop polling setting an ACK for an emptied slsb */ |
| if (count == QDIO_MAX_BUFFERS_PER_Q) { |
| /* overwriting everything, just delete polling status */ |
| q->u.in.polling = 0; |
| q->u.in.ack_count = 0; |
| goto set; |
| } else if (buf_in_between(q->u.in.ack_start, bufnr, count)) { |
| if (is_qebsm(q)) { |
| /* partial overwrite, just update ack_start */ |
| diff = add_buf(bufnr, count); |
| diff = sub_buf(diff, q->u.in.ack_start); |
| q->u.in.ack_count -= diff; |
| if (q->u.in.ack_count <= 0) { |
| q->u.in.polling = 0; |
| q->u.in.ack_count = 0; |
| goto set; |
| } |
| q->u.in.ack_start = add_buf(q->u.in.ack_start, diff); |
| } |
| else |
| /* the only ACK will be deleted, so stop polling */ |
| q->u.in.polling = 0; |
| } |
| |
| set: |
| count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); |
| atomic_add(count, &q->nr_buf_used); |
| |
| if (need_siga_in(q)) |
| return qdio_siga_input(q); |
| |
| return 0; |
| } |
| |
| /** |
| * handle_outbound - process filled outbound buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are filled |
| */ |
| static int handle_outbound(struct qdio_q *q, unsigned int callflags, |
| int bufnr, int count) |
| { |
| unsigned char state = 0; |
| int used, rc = 0; |
| |
| qperf_inc(q, outbound_call); |
| |
| count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); |
| used = atomic_add_return(count, &q->nr_buf_used); |
| |
| if (used == QDIO_MAX_BUFFERS_PER_Q) |
| qperf_inc(q, outbound_queue_full); |
| |
| if (callflags & QDIO_FLAG_PCI_OUT) { |
| q->u.out.pci_out_enabled = 1; |
| qperf_inc(q, pci_request_int); |
| } else |
| q->u.out.pci_out_enabled = 0; |
| |
| if (queue_type(q) == QDIO_IQDIO_QFMT) { |
| unsigned long phys_aob = 0; |
| |
| /* One SIGA-W per buffer required for unicast HSI */ |
| WARN_ON_ONCE(count > 1 && !multicast_outbound(q)); |
| |
| if (q->u.out.use_cq) |
| phys_aob = qdio_aob_for_buffer(&q->u.out, bufnr); |
| |
| rc = qdio_kick_outbound_q(q, phys_aob); |
| } else if (need_siga_sync(q)) { |
| rc = qdio_siga_sync_q(q); |
| } else if (count < QDIO_MAX_BUFFERS_PER_Q && |
| get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 && |
| state == SLSB_CU_OUTPUT_PRIMED) { |
| /* The previous buffer is not processed yet, tack on. */ |
| qperf_inc(q, fast_requeue); |
| } else { |
| rc = qdio_kick_outbound_q(q, 0); |
| } |
| |
| /* in case of SIGA errors we must process the error immediately */ |
| if (used >= q->u.out.scan_threshold || rc) |
| qdio_tasklet_schedule(q); |
| else |
| /* free the SBALs in case of no further traffic */ |
| if (!timer_pending(&q->u.out.timer) && |
| likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) |
| mod_timer(&q->u.out.timer, jiffies + HZ); |
| return rc; |
| } |
| |
| /** |
| * do_QDIO - process input or output buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @callflags: input or output and special flags from the program |
| * @q_nr: queue number |
| * @bufnr: buffer number |
| * @count: how many buffers to process |
| */ |
| int do_QDIO(struct ccw_device *cdev, unsigned int callflags, |
| int q_nr, unsigned int bufnr, unsigned int count) |
| { |
| struct qdio_irq *irq_ptr; |
| |
| if (bufnr >= QDIO_MAX_BUFFERS_PER_Q || count > QDIO_MAX_BUFFERS_PER_Q) |
| return -EINVAL; |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, |
| "do%02x b:%02x c:%02x", callflags, bufnr, count); |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE) |
| return -EIO; |
| if (!count) |
| return 0; |
| if (callflags & QDIO_FLAG_SYNC_INPUT) |
| return handle_inbound(irq_ptr->input_qs[q_nr], |
| callflags, bufnr, count); |
| else if (callflags & QDIO_FLAG_SYNC_OUTPUT) |
| return handle_outbound(irq_ptr->output_qs[q_nr], |
| callflags, bufnr, count); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(do_QDIO); |
| |
| /** |
| * qdio_start_irq - process input buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @nr: input queue number |
| * |
| * Return codes |
| * 0 - success |
| * 1 - irqs not started since new data is available |
| */ |
| int qdio_start_irq(struct ccw_device *cdev, int nr) |
| { |
| struct qdio_q *q; |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| q = irq_ptr->input_qs[nr]; |
| |
| clear_nonshared_ind(irq_ptr); |
| qdio_stop_polling(q); |
| clear_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state); |
| |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (test_nonshared_ind(irq_ptr)) |
| goto rescan; |
| if (!qdio_inbound_q_done(q, q->first_to_check)) |
| goto rescan; |
| return 0; |
| |
| rescan: |
| if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED, |
| &q->u.in.queue_irq_state)) |
| return 0; |
| else |
| return 1; |
| |
| } |
| EXPORT_SYMBOL(qdio_start_irq); |
| |
| /** |
| * qdio_get_next_buffers - process input buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @nr: input queue number |
| * @bufnr: first filled buffer number |
| * @error: buffers are in error state |
| * |
| * Return codes |
| * < 0 - error |
| * = 0 - no new buffers found |
| * > 0 - number of processed buffers |
| */ |
| int qdio_get_next_buffers(struct ccw_device *cdev, int nr, int *bufnr, |
| int *error) |
| { |
| struct qdio_q *q; |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| unsigned int start; |
| int count; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| q = irq_ptr->input_qs[nr]; |
| start = q->first_to_check; |
| |
| /* |
| * Cannot rely on automatic sync after interrupt since queues may |
| * also be examined without interrupt. |
| */ |
| if (need_siga_sync(q)) |
| qdio_sync_queues(q); |
| |
| qdio_check_outbound_pci_queues(irq_ptr); |
| |
| count = qdio_inbound_q_moved(q, start); |
| if (count == 0) |
| return 0; |
| |
| start = add_buf(start, count); |
| q->first_to_check = start; |
| |
| /* Note: upper-layer MUST stop processing immediately here ... */ |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return -EIO; |
| |
| *bufnr = q->first_to_kick; |
| *error = q->qdio_error; |
| |
| /* for the next time */ |
| q->first_to_kick = add_buf(q->first_to_kick, count); |
| q->qdio_error = 0; |
| |
| return count; |
| } |
| EXPORT_SYMBOL(qdio_get_next_buffers); |
| |
| /** |
| * qdio_stop_irq - disable interrupt processing for the device |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @nr: input queue number |
| * |
| * Return codes |
| * 0 - interrupts were already disabled |
| * 1 - interrupts successfully disabled |
| */ |
| int qdio_stop_irq(struct ccw_device *cdev, int nr) |
| { |
| struct qdio_q *q; |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| q = irq_ptr->input_qs[nr]; |
| |
| if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED, |
| &q->u.in.queue_irq_state)) |
| return 0; |
| else |
| return 1; |
| } |
| EXPORT_SYMBOL(qdio_stop_irq); |
| |
| /** |
| * qdio_pnso_brinfo() - perform network subchannel op #0 - bridge info. |
| * @schid: Subchannel ID. |
| * @cnc: Boolean Change-Notification Control |
| * @response: Response code will be stored at this address |
| * @cb: Callback function will be executed for each element |
| * of the address list |
| * @priv: Pointer to pass to the callback function. |
| * |
| * Performs "Store-network-bridging-information list" operation and calls |
| * the callback function for every entry in the list. If "change- |
| * notification-control" is set, further changes in the address list |
| * will be reported via the IPA command. |
| */ |
| int qdio_pnso_brinfo(struct subchannel_id schid, |
| int cnc, u16 *response, |
| void (*cb)(void *priv, enum qdio_brinfo_entry_type type, |
| void *entry), |
| void *priv) |
| { |
| struct chsc_pnso_area *rr; |
| int rc; |
| u32 prev_instance = 0; |
| int isfirstblock = 1; |
| int i, size, elems; |
| |
| rr = (struct chsc_pnso_area *)get_zeroed_page(GFP_KERNEL); |
| if (rr == NULL) |
| return -ENOMEM; |
| do { |
| /* on the first iteration, naihdr.resume_token will be zero */ |
| rc = chsc_pnso_brinfo(schid, rr, rr->naihdr.resume_token, cnc); |
| if (rc != 0 && rc != -EBUSY) |
| goto out; |
| if (rr->response.code != 1) { |
| rc = -EIO; |
| continue; |
| } else |
| rc = 0; |
| |
| if (cb == NULL) |
| continue; |
| |
| size = rr->naihdr.naids; |
| elems = (rr->response.length - |
| sizeof(struct chsc_header) - |
| sizeof(struct chsc_brinfo_naihdr)) / |
| size; |
| |
| if (!isfirstblock && (rr->naihdr.instance != prev_instance)) { |
| /* Inform the caller that they need to scrap */ |
| /* the data that was already reported via cb */ |
| rc = -EAGAIN; |
| break; |
| } |
| isfirstblock = 0; |
| prev_instance = rr->naihdr.instance; |
| for (i = 0; i < elems; i++) |
| switch (size) { |
| case sizeof(struct qdio_brinfo_entry_l3_ipv6): |
| (*cb)(priv, l3_ipv6_addr, |
| &rr->entries.l3_ipv6[i]); |
| break; |
| case sizeof(struct qdio_brinfo_entry_l3_ipv4): |
| (*cb)(priv, l3_ipv4_addr, |
| &rr->entries.l3_ipv4[i]); |
| break; |
| case sizeof(struct qdio_brinfo_entry_l2): |
| (*cb)(priv, l2_addr_lnid, |
| &rr->entries.l2[i]); |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| rc = -EIO; |
| goto out; |
| } |
| } while (rr->response.code == 0x0107 || /* channel busy */ |
| (rr->response.code == 1 && /* list stored */ |
| /* resume token is non-zero => list incomplete */ |
| (rr->naihdr.resume_token.t1 || rr->naihdr.resume_token.t2))); |
| (*response) = rr->response.code; |
| |
| out: |
| free_page((unsigned long)rr); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_pnso_brinfo); |
| |
| static int __init init_QDIO(void) |
| { |
| int rc; |
| |
| rc = qdio_debug_init(); |
| if (rc) |
| return rc; |
| rc = qdio_setup_init(); |
| if (rc) |
| goto out_debug; |
| rc = tiqdio_allocate_memory(); |
| if (rc) |
| goto out_cache; |
| rc = tiqdio_register_thinints(); |
| if (rc) |
| goto out_ti; |
| return 0; |
| |
| out_ti: |
| tiqdio_free_memory(); |
| out_cache: |
| qdio_setup_exit(); |
| out_debug: |
| qdio_debug_exit(); |
| return rc; |
| } |
| |
| static void __exit exit_QDIO(void) |
| { |
| tiqdio_unregister_thinints(); |
| tiqdio_free_memory(); |
| qdio_setup_exit(); |
| qdio_debug_exit(); |
| } |
| |
| module_init(init_QDIO); |
| module_exit(exit_QDIO); |