| /* |
| * Copyright 2022 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| |
| #include "reg_helper.h" |
| #include "resource.h" |
| #include "mcif_wb.h" |
| #include "dcn32_mmhubbub.h" |
| |
| |
| #define REG(reg)\ |
| mcif_wb30->mcif_wb_regs->reg |
| |
| #define CTX \ |
| mcif_wb30->base.ctx |
| |
| #undef FN |
| #define FN(reg_name, field_name) \ |
| mcif_wb30->mcif_wb_shift->field_name, mcif_wb30->mcif_wb_mask->field_name |
| |
| #define MCIF_ADDR(addr) (((unsigned long long)addr & 0xffffffffff) + 0xFE) >> 8 |
| #define MCIF_ADDR_HIGH(addr) (unsigned long long)addr >> 40 |
| |
| /* wbif programming guide: |
| * 1. set up wbif parameter: |
| * unsigned long long luma_address[4]; //4 frame buffer |
| * unsigned long long chroma_address[4]; |
| * unsigned int luma_pitch; |
| * unsigned int chroma_pitch; |
| * unsigned int warmup_pitch=0x10; //256B align, the page size is 4KB when it is 0x10 |
| * unsigned int slice_lines; //slice size |
| * unsigned int time_per_pixel; // time per pixel, in ns |
| * unsigned int arbitration_slice; // 0: 2048 bytes 1: 4096 bytes 2: 8192 Bytes |
| * unsigned int max_scaled_time; // used for QOS generation |
| * unsigned int swlock=0x0; |
| * unsigned int cli_watermark[4]; //4 group urgent watermark |
| * unsigned int pstate_watermark[4]; //4 group pstate watermark |
| * unsigned int sw_int_en; // Software interrupt enable, frame end and overflow |
| * unsigned int sw_slice_int_en; // slice end interrupt enable |
| * unsigned int sw_overrun_int_en; // overrun error interrupt enable |
| * unsigned int vce_int_en; // VCE interrupt enable, frame end and overflow |
| * unsigned int vce_slice_int_en; // VCE slice end interrupt enable, frame end and overflow |
| * |
| * 2. configure wbif register |
| * a. call mmhubbub_config_wbif() |
| * |
| * 3. Enable wbif |
| * call set_wbif_bufmgr_enable(); |
| * |
| * 4. wbif_dump_status(), option, for debug purpose |
| * the bufmgr status can show the progress of write back, can be used for debug purpose |
| */ |
| |
| static void mmhubbub32_warmup_mcif(struct mcif_wb *mcif_wb, |
| struct mcif_warmup_params *params) |
| { |
| struct dcn30_mmhubbub *mcif_wb30 = TO_DCN30_MMHUBBUB(mcif_wb); |
| union large_integer start_address_shift = {.quad_part = params->start_address.quad_part >> 5}; |
| |
| /* Set base address and region size for warmup */ |
| REG_SET(MMHUBBUB_WARMUP_BASE_ADDR_HIGH, 0, MMHUBBUB_WARMUP_BASE_ADDR_HIGH, start_address_shift.high_part); |
| REG_SET(MMHUBBUB_WARMUP_BASE_ADDR_LOW, 0, MMHUBBUB_WARMUP_BASE_ADDR_LOW, start_address_shift.low_part); |
| REG_SET(MMHUBBUB_WARMUP_ADDR_REGION, 0, MMHUBBUB_WARMUP_ADDR_REGION, params->region_size >> 5); |
| // REG_SET(MMHUBBUB_WARMUP_P_VMID, 0, MMHUBBUB_WARMUP_P_VMID, params->p_vmid); |
| |
| /* Set address increment and enable warmup */ |
| REG_SET_3(MMHUBBUB_WARMUP_CONTROL_STATUS, 0, MMHUBBUB_WARMUP_EN, true, |
| MMHUBBUB_WARMUP_SW_INT_EN, true, |
| MMHUBBUB_WARMUP_INC_ADDR, params->address_increment >> 5); |
| |
| /* Wait for an interrupt to signal warmup is completed */ |
| REG_WAIT(MMHUBBUB_WARMUP_CONTROL_STATUS, MMHUBBUB_WARMUP_SW_INT_STATUS, 1, 20, 100); |
| |
| /* Acknowledge interrupt */ |
| REG_UPDATE(MMHUBBUB_WARMUP_CONTROL_STATUS, MMHUBBUB_WARMUP_SW_INT_ACK, 1); |
| |
| /* Disable warmup */ |
| REG_UPDATE(MMHUBBUB_WARMUP_CONTROL_STATUS, MMHUBBUB_WARMUP_EN, false); |
| } |
| |
| void mmhubbub32_config_mcif_buf(struct mcif_wb *mcif_wb, |
| struct mcif_buf_params *params, |
| unsigned int dest_height) |
| { |
| struct dcn30_mmhubbub *mcif_wb30 = TO_DCN30_MMHUBBUB(mcif_wb); |
| |
| /* buffer address for packing mode or Luma in planar mode */ |
| REG_UPDATE(MCIF_WB_BUF_1_ADDR_Y, MCIF_WB_BUF_1_ADDR_Y, MCIF_ADDR(params->luma_address[0])); |
| REG_UPDATE(MCIF_WB_BUF_1_ADDR_Y_HIGH, MCIF_WB_BUF_1_ADDR_Y_HIGH, MCIF_ADDR_HIGH(params->luma_address[0])); |
| |
| /* buffer address for Chroma in planar mode (unused in packing mode) */ |
| REG_UPDATE(MCIF_WB_BUF_1_ADDR_C, MCIF_WB_BUF_1_ADDR_C, MCIF_ADDR(params->chroma_address[0])); |
| REG_UPDATE(MCIF_WB_BUF_1_ADDR_C_HIGH, MCIF_WB_BUF_1_ADDR_C_HIGH, MCIF_ADDR_HIGH(params->chroma_address[0])); |
| |
| /* buffer address for packing mode or Luma in planar mode */ |
| REG_UPDATE(MCIF_WB_BUF_2_ADDR_Y, MCIF_WB_BUF_2_ADDR_Y, MCIF_ADDR(params->luma_address[1])); |
| REG_UPDATE(MCIF_WB_BUF_2_ADDR_Y_HIGH, MCIF_WB_BUF_2_ADDR_Y_HIGH, MCIF_ADDR_HIGH(params->luma_address[1])); |
| |
| /* buffer address for Chroma in planar mode (unused in packing mode) */ |
| REG_UPDATE(MCIF_WB_BUF_2_ADDR_C, MCIF_WB_BUF_2_ADDR_C, MCIF_ADDR(params->chroma_address[1])); |
| REG_UPDATE(MCIF_WB_BUF_2_ADDR_C_HIGH, MCIF_WB_BUF_2_ADDR_C_HIGH, MCIF_ADDR_HIGH(params->chroma_address[1])); |
| |
| /* buffer address for packing mode or Luma in planar mode */ |
| REG_UPDATE(MCIF_WB_BUF_3_ADDR_Y, MCIF_WB_BUF_3_ADDR_Y, MCIF_ADDR(params->luma_address[2])); |
| REG_UPDATE(MCIF_WB_BUF_3_ADDR_Y_HIGH, MCIF_WB_BUF_3_ADDR_Y_HIGH, MCIF_ADDR_HIGH(params->luma_address[2])); |
| |
| /* buffer address for Chroma in planar mode (unused in packing mode) */ |
| REG_UPDATE(MCIF_WB_BUF_3_ADDR_C, MCIF_WB_BUF_3_ADDR_C, MCIF_ADDR(params->chroma_address[2])); |
| REG_UPDATE(MCIF_WB_BUF_3_ADDR_C_HIGH, MCIF_WB_BUF_3_ADDR_C_HIGH, MCIF_ADDR_HIGH(params->chroma_address[2])); |
| |
| /* buffer address for packing mode or Luma in planar mode */ |
| REG_UPDATE(MCIF_WB_BUF_4_ADDR_Y, MCIF_WB_BUF_4_ADDR_Y, MCIF_ADDR(params->luma_address[3])); |
| REG_UPDATE(MCIF_WB_BUF_4_ADDR_Y_HIGH, MCIF_WB_BUF_4_ADDR_Y_HIGH, MCIF_ADDR_HIGH(params->luma_address[3])); |
| |
| /* buffer address for Chroma in planar mode (unused in packing mode) */ |
| REG_UPDATE(MCIF_WB_BUF_4_ADDR_C, MCIF_WB_BUF_4_ADDR_C, MCIF_ADDR(params->chroma_address[3])); |
| REG_UPDATE(MCIF_WB_BUF_4_ADDR_C_HIGH, MCIF_WB_BUF_4_ADDR_C_HIGH, MCIF_ADDR_HIGH(params->chroma_address[3])); |
| |
| /* setup luma & chroma size |
| * should be enough to contain a whole frame Luma data, |
| * the programmed value is frame buffer size [27:8], 256-byte aligned |
| */ |
| REG_UPDATE(MCIF_WB_BUF_LUMA_SIZE, MCIF_WB_BUF_LUMA_SIZE, (params->luma_pitch>>8) * dest_height); |
| REG_UPDATE(MCIF_WB_BUF_CHROMA_SIZE, MCIF_WB_BUF_CHROMA_SIZE, (params->chroma_pitch>>8) * dest_height); |
| |
| /* enable address fence */ |
| REG_UPDATE(MCIF_WB_BUFMGR_SW_CONTROL, MCIF_WB_BUF_ADDR_FENCE_EN, 1); |
| |
| /* setup pitch, the programmed value is [15:8], 256B align */ |
| REG_UPDATE_2(MCIF_WB_BUF_PITCH, MCIF_WB_BUF_LUMA_PITCH, params->luma_pitch >> 8, |
| MCIF_WB_BUF_CHROMA_PITCH, params->chroma_pitch >> 8); |
| } |
| |
| static void mmhubbub32_config_mcif_arb(struct mcif_wb *mcif_wb, |
| struct mcif_arb_params *params) |
| { |
| struct dcn30_mmhubbub *mcif_wb30 = TO_DCN30_MMHUBBUB(mcif_wb); |
| |
| /* Programmed by the video driver based on the CRTC timing (for DWB) */ |
| REG_UPDATE(MCIF_WB_ARBITRATION_CONTROL, MCIF_WB_TIME_PER_PIXEL, params->time_per_pixel); |
| |
| /* Programming dwb watermark */ |
| /* Watermark to generate urgent in MCIF_WB_CLI, value is determined by MCIF_WB_CLI_WATERMARK_MASK. */ |
| /* Program in ns. A formula will be provided in the pseudo code to calculate the value. */ |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK_MASK, 0x0); |
| /* urgent_watermarkA */ |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK, params->cli_watermark[0]); |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK_MASK, 0x1); |
| /* urgent_watermarkB */ |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK, params->cli_watermark[1]); |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK_MASK, 0x2); |
| /* urgent_watermarkC */ |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK, params->cli_watermark[2]); |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK_MASK, 0x3); |
| /* urgent_watermarkD */ |
| REG_UPDATE(MCIF_WB_WATERMARK, MCIF_WB_CLI_WATERMARK, params->cli_watermark[3]); |
| |
| /* Programming nb pstate watermark */ |
| /* nbp_state_change_watermarkA */ |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, NB_PSTATE_CHANGE_WATERMARK_MASK, 0x0); |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, |
| NB_PSTATE_CHANGE_REFRESH_WATERMARK, params->pstate_watermark[0]); |
| /* nbp_state_change_watermarkB */ |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, NB_PSTATE_CHANGE_WATERMARK_MASK, 0x1); |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, |
| NB_PSTATE_CHANGE_REFRESH_WATERMARK, params->pstate_watermark[1]); |
| /* nbp_state_change_watermarkC */ |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, NB_PSTATE_CHANGE_WATERMARK_MASK, 0x2); |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, |
| NB_PSTATE_CHANGE_REFRESH_WATERMARK, params->pstate_watermark[2]); |
| /* nbp_state_change_watermarkD */ |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, NB_PSTATE_CHANGE_WATERMARK_MASK, 0x3); |
| REG_UPDATE(MCIF_WB_NB_PSTATE_LATENCY_WATERMARK, |
| NB_PSTATE_CHANGE_REFRESH_WATERMARK, params->pstate_watermark[3]); |
| |
| /* dram_speed_change_duration - register removed */ |
| //REG_UPDATE(MCIF_WB_DRAM_SPEED_CHANGE_DURATION_VBI, |
| // MCIF_WB_DRAM_SPEED_CHANGE_DURATION_VBI, params->dram_speed_change_duration); |
| |
| /* max_scaled_time */ |
| REG_UPDATE(MULTI_LEVEL_QOS_CTRL, MAX_SCALED_TIME_TO_URGENT, params->max_scaled_time); |
| |
| /* slice_lines */ |
| REG_UPDATE(MCIF_WB_BUFMGR_VCE_CONTROL, MCIF_WB_BUFMGR_SLICE_SIZE, params->slice_lines-1); |
| |
| /* Set arbitration unit for Luma/Chroma */ |
| /* arb_unit=2 should be chosen for more efficiency */ |
| /* Arbitration size, 0: 2048 bytes 1: 4096 bytes 2: 8192 Bytes */ |
| REG_UPDATE(MCIF_WB_ARBITRATION_CONTROL, MCIF_WB_CLIENT_ARBITRATION_SLICE, params->arbitration_slice); |
| } |
| |
| const struct mcif_wb_funcs dcn32_mmhubbub_funcs = { |
| .warmup_mcif = mmhubbub32_warmup_mcif, |
| .enable_mcif = mmhubbub2_enable_mcif, |
| .disable_mcif = mmhubbub2_disable_mcif, |
| .config_mcif_buf = mmhubbub32_config_mcif_buf, |
| .config_mcif_arb = mmhubbub32_config_mcif_arb, |
| .config_mcif_irq = mmhubbub2_config_mcif_irq, |
| .dump_frame = mcifwb2_dump_frame, |
| }; |
| |
| void dcn32_mmhubbub_construct(struct dcn30_mmhubbub *mcif_wb30, |
| struct dc_context *ctx, |
| const struct dcn30_mmhubbub_registers *mcif_wb_regs, |
| const struct dcn30_mmhubbub_shift *mcif_wb_shift, |
| const struct dcn30_mmhubbub_mask *mcif_wb_mask, |
| int inst) |
| { |
| mcif_wb30->base.ctx = ctx; |
| |
| mcif_wb30->base.inst = inst; |
| mcif_wb30->base.funcs = &dcn32_mmhubbub_funcs; |
| |
| mcif_wb30->mcif_wb_regs = mcif_wb_regs; |
| mcif_wb30->mcif_wb_shift = mcif_wb_shift; |
| mcif_wb30->mcif_wb_mask = mcif_wb_mask; |
| } |