| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define SWSMU_CODE_LAYER_L2 |
| |
| #include <linux/firmware.h> |
| #include <linux/pci.h> |
| #include <linux/i2c.h> |
| #include "amdgpu.h" |
| #include "amdgpu_dpm.h" |
| #include "amdgpu_smu.h" |
| #include "atomfirmware.h" |
| #include "amdgpu_atomfirmware.h" |
| #include "amdgpu_atombios.h" |
| #include "smu_v11_0.h" |
| #include "smu11_driver_if_sienna_cichlid.h" |
| #include "soc15_common.h" |
| #include "atom.h" |
| #include "sienna_cichlid_ppt.h" |
| #include "smu_v11_0_7_pptable.h" |
| #include "smu_v11_0_7_ppsmc.h" |
| #include "nbio/nbio_2_3_offset.h" |
| #include "nbio/nbio_2_3_sh_mask.h" |
| #include "thm/thm_11_0_2_offset.h" |
| #include "thm/thm_11_0_2_sh_mask.h" |
| #include "mp/mp_11_0_offset.h" |
| #include "mp/mp_11_0_sh_mask.h" |
| |
| #include "asic_reg/mp/mp_11_0_sh_mask.h" |
| #include "amdgpu_ras.h" |
| #include "smu_cmn.h" |
| |
| /* |
| * DO NOT use these for err/warn/info/debug messages. |
| * Use dev_err, dev_warn, dev_info and dev_dbg instead. |
| * They are more MGPU friendly. |
| */ |
| #undef pr_err |
| #undef pr_warn |
| #undef pr_info |
| #undef pr_debug |
| |
| #define FEATURE_MASK(feature) (1ULL << feature) |
| #define SMC_DPM_FEATURE ( \ |
| FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_UCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_LINK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_FCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT)) |
| |
| #define SMU_11_0_7_GFX_BUSY_THRESHOLD 15 |
| |
| #define GET_PPTABLE_MEMBER(field, member) do {\ |
| if (smu->adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 13))\ |
| (*member) = (smu->smu_table.driver_pptable + offsetof(PPTable_beige_goby_t, field));\ |
| else\ |
| (*member) = (smu->smu_table.driver_pptable + offsetof(PPTable_t, field));\ |
| } while(0) |
| |
| /* STB FIFO depth is in 64bit units */ |
| #define SIENNA_CICHLID_STB_DEPTH_UNIT_BYTES 8 |
| |
| /* |
| * SMU support ECCTABLE since version 58.70.0, |
| * use this to check whether ECCTABLE feature is supported. |
| */ |
| #define SUPPORT_ECCTABLE_SMU_VERSION 0x003a4600 |
| |
| static int get_table_size(struct smu_context *smu) |
| { |
| if (smu->adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 13)) |
| return sizeof(PPTable_beige_goby_t); |
| else |
| return sizeof(PPTable_t); |
| } |
| |
| static struct cmn2asic_msg_mapping sienna_cichlid_message_map[SMU_MSG_MAX_COUNT] = { |
| MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 1), |
| MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 1), |
| MSG_MAP(GetDriverIfVersion, PPSMC_MSG_GetDriverIfVersion, 1), |
| MSG_MAP(SetAllowedFeaturesMaskLow, PPSMC_MSG_SetAllowedFeaturesMaskLow, 0), |
| MSG_MAP(SetAllowedFeaturesMaskHigh, PPSMC_MSG_SetAllowedFeaturesMaskHigh, 0), |
| MSG_MAP(EnableAllSmuFeatures, PPSMC_MSG_EnableAllSmuFeatures, 0), |
| MSG_MAP(DisableAllSmuFeatures, PPSMC_MSG_DisableAllSmuFeatures, 0), |
| MSG_MAP(EnableSmuFeaturesLow, PPSMC_MSG_EnableSmuFeaturesLow, 1), |
| MSG_MAP(EnableSmuFeaturesHigh, PPSMC_MSG_EnableSmuFeaturesHigh, 1), |
| MSG_MAP(DisableSmuFeaturesLow, PPSMC_MSG_DisableSmuFeaturesLow, 1), |
| MSG_MAP(DisableSmuFeaturesHigh, PPSMC_MSG_DisableSmuFeaturesHigh, 1), |
| MSG_MAP(GetEnabledSmuFeaturesLow, PPSMC_MSG_GetRunningSmuFeaturesLow, 1), |
| MSG_MAP(GetEnabledSmuFeaturesHigh, PPSMC_MSG_GetRunningSmuFeaturesHigh, 1), |
| MSG_MAP(SetWorkloadMask, PPSMC_MSG_SetWorkloadMask, 1), |
| MSG_MAP(SetPptLimit, PPSMC_MSG_SetPptLimit, 0), |
| MSG_MAP(SetDriverDramAddrHigh, PPSMC_MSG_SetDriverDramAddrHigh, 1), |
| MSG_MAP(SetDriverDramAddrLow, PPSMC_MSG_SetDriverDramAddrLow, 1), |
| MSG_MAP(SetToolsDramAddrHigh, PPSMC_MSG_SetToolsDramAddrHigh, 0), |
| MSG_MAP(SetToolsDramAddrLow, PPSMC_MSG_SetToolsDramAddrLow, 0), |
| MSG_MAP(TransferTableSmu2Dram, PPSMC_MSG_TransferTableSmu2Dram, 1), |
| MSG_MAP(TransferTableDram2Smu, PPSMC_MSG_TransferTableDram2Smu, 0), |
| MSG_MAP(UseDefaultPPTable, PPSMC_MSG_UseDefaultPPTable, 0), |
| MSG_MAP(RunDcBtc, PPSMC_MSG_RunDcBtc, 0), |
| MSG_MAP(EnterBaco, PPSMC_MSG_EnterBaco, 0), |
| MSG_MAP(SetSoftMinByFreq, PPSMC_MSG_SetSoftMinByFreq, 1), |
| MSG_MAP(SetSoftMaxByFreq, PPSMC_MSG_SetSoftMaxByFreq, 1), |
| MSG_MAP(SetHardMinByFreq, PPSMC_MSG_SetHardMinByFreq, 1), |
| MSG_MAP(SetHardMaxByFreq, PPSMC_MSG_SetHardMaxByFreq, 0), |
| MSG_MAP(GetMinDpmFreq, PPSMC_MSG_GetMinDpmFreq, 1), |
| MSG_MAP(GetMaxDpmFreq, PPSMC_MSG_GetMaxDpmFreq, 1), |
| MSG_MAP(GetDpmFreqByIndex, PPSMC_MSG_GetDpmFreqByIndex, 1), |
| MSG_MAP(SetGeminiMode, PPSMC_MSG_SetGeminiMode, 0), |
| MSG_MAP(SetGeminiApertureHigh, PPSMC_MSG_SetGeminiApertureHigh, 0), |
| MSG_MAP(SetGeminiApertureLow, PPSMC_MSG_SetGeminiApertureLow, 0), |
| MSG_MAP(OverridePcieParameters, PPSMC_MSG_OverridePcieParameters, 0), |
| MSG_MAP(ReenableAcDcInterrupt, PPSMC_MSG_ReenableAcDcInterrupt, 0), |
| MSG_MAP(NotifyPowerSource, PPSMC_MSG_NotifyPowerSource, 0), |
| MSG_MAP(SetUclkFastSwitch, PPSMC_MSG_SetUclkFastSwitch, 0), |
| MSG_MAP(SetVideoFps, PPSMC_MSG_SetVideoFps, 0), |
| MSG_MAP(PrepareMp1ForUnload, PPSMC_MSG_PrepareMp1ForUnload, 1), |
| MSG_MAP(AllowGfxOff, PPSMC_MSG_AllowGfxOff, 0), |
| MSG_MAP(DisallowGfxOff, PPSMC_MSG_DisallowGfxOff, 0), |
| MSG_MAP(GetPptLimit, PPSMC_MSG_GetPptLimit, 0), |
| MSG_MAP(GetDcModeMaxDpmFreq, PPSMC_MSG_GetDcModeMaxDpmFreq, 1), |
| MSG_MAP(ExitBaco, PPSMC_MSG_ExitBaco, 0), |
| MSG_MAP(PowerUpVcn, PPSMC_MSG_PowerUpVcn, 0), |
| MSG_MAP(PowerDownVcn, PPSMC_MSG_PowerDownVcn, 0), |
| MSG_MAP(PowerUpJpeg, PPSMC_MSG_PowerUpJpeg, 0), |
| MSG_MAP(PowerDownJpeg, PPSMC_MSG_PowerDownJpeg, 0), |
| MSG_MAP(BacoAudioD3PME, PPSMC_MSG_BacoAudioD3PME, 0), |
| MSG_MAP(ArmD3, PPSMC_MSG_ArmD3, 0), |
| MSG_MAP(Mode1Reset, PPSMC_MSG_Mode1Reset, 0), |
| MSG_MAP(SetMGpuFanBoostLimitRpm, PPSMC_MSG_SetMGpuFanBoostLimitRpm, 0), |
| MSG_MAP(SetGpoFeaturePMask, PPSMC_MSG_SetGpoFeaturePMask, 0), |
| MSG_MAP(DisallowGpo, PPSMC_MSG_DisallowGpo, 0), |
| MSG_MAP(Enable2ndUSB20Port, PPSMC_MSG_Enable2ndUSB20Port, 0), |
| }; |
| |
| static struct cmn2asic_mapping sienna_cichlid_clk_map[SMU_CLK_COUNT] = { |
| CLK_MAP(GFXCLK, PPCLK_GFXCLK), |
| CLK_MAP(SCLK, PPCLK_GFXCLK), |
| CLK_MAP(SOCCLK, PPCLK_SOCCLK), |
| CLK_MAP(FCLK, PPCLK_FCLK), |
| CLK_MAP(UCLK, PPCLK_UCLK), |
| CLK_MAP(MCLK, PPCLK_UCLK), |
| CLK_MAP(DCLK, PPCLK_DCLK_0), |
| CLK_MAP(DCLK1, PPCLK_DCLK_1), |
| CLK_MAP(VCLK, PPCLK_VCLK_0), |
| CLK_MAP(VCLK1, PPCLK_VCLK_1), |
| CLK_MAP(DCEFCLK, PPCLK_DCEFCLK), |
| CLK_MAP(DISPCLK, PPCLK_DISPCLK), |
| CLK_MAP(PIXCLK, PPCLK_PIXCLK), |
| CLK_MAP(PHYCLK, PPCLK_PHYCLK), |
| }; |
| |
| static struct cmn2asic_mapping sienna_cichlid_feature_mask_map[SMU_FEATURE_COUNT] = { |
| FEA_MAP(DPM_PREFETCHER), |
| FEA_MAP(DPM_GFXCLK), |
| FEA_MAP(DPM_GFX_GPO), |
| FEA_MAP(DPM_UCLK), |
| FEA_MAP(DPM_FCLK), |
| FEA_MAP(DPM_SOCCLK), |
| FEA_MAP(DPM_MP0CLK), |
| FEA_MAP(DPM_LINK), |
| FEA_MAP(DPM_DCEFCLK), |
| FEA_MAP(DPM_XGMI), |
| FEA_MAP(MEM_VDDCI_SCALING), |
| FEA_MAP(MEM_MVDD_SCALING), |
| FEA_MAP(DS_GFXCLK), |
| FEA_MAP(DS_SOCCLK), |
| FEA_MAP(DS_FCLK), |
| FEA_MAP(DS_LCLK), |
| FEA_MAP(DS_DCEFCLK), |
| FEA_MAP(DS_UCLK), |
| FEA_MAP(GFX_ULV), |
| FEA_MAP(FW_DSTATE), |
| FEA_MAP(GFXOFF), |
| FEA_MAP(BACO), |
| FEA_MAP(MM_DPM_PG), |
| FEA_MAP(RSMU_SMN_CG), |
| FEA_MAP(PPT), |
| FEA_MAP(TDC), |
| FEA_MAP(APCC_PLUS), |
| FEA_MAP(GTHR), |
| FEA_MAP(ACDC), |
| FEA_MAP(VR0HOT), |
| FEA_MAP(VR1HOT), |
| FEA_MAP(FW_CTF), |
| FEA_MAP(FAN_CONTROL), |
| FEA_MAP(THERMAL), |
| FEA_MAP(GFX_DCS), |
| FEA_MAP(RM), |
| FEA_MAP(LED_DISPLAY), |
| FEA_MAP(GFX_SS), |
| FEA_MAP(OUT_OF_BAND_MONITOR), |
| FEA_MAP(TEMP_DEPENDENT_VMIN), |
| FEA_MAP(MMHUB_PG), |
| FEA_MAP(ATHUB_PG), |
| FEA_MAP(APCC_DFLL), |
| }; |
| |
| static struct cmn2asic_mapping sienna_cichlid_table_map[SMU_TABLE_COUNT] = { |
| TAB_MAP(PPTABLE), |
| TAB_MAP(WATERMARKS), |
| TAB_MAP(AVFS_PSM_DEBUG), |
| TAB_MAP(AVFS_FUSE_OVERRIDE), |
| TAB_MAP(PMSTATUSLOG), |
| TAB_MAP(SMU_METRICS), |
| TAB_MAP(DRIVER_SMU_CONFIG), |
| TAB_MAP(ACTIVITY_MONITOR_COEFF), |
| TAB_MAP(OVERDRIVE), |
| TAB_MAP(I2C_COMMANDS), |
| TAB_MAP(PACE), |
| TAB_MAP(ECCINFO), |
| }; |
| |
| static struct cmn2asic_mapping sienna_cichlid_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { |
| PWR_MAP(AC), |
| PWR_MAP(DC), |
| }; |
| |
| static struct cmn2asic_mapping sienna_cichlid_workload_map[PP_SMC_POWER_PROFILE_COUNT] = { |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT, WORKLOAD_PPLIB_DEFAULT_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_FULLSCREEN3D, WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_POWERSAVING, WORKLOAD_PPLIB_POWER_SAVING_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VIDEO, WORKLOAD_PPLIB_VIDEO_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VR, WORKLOAD_PPLIB_VR_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_COMPUTE, WORKLOAD_PPLIB_COMPUTE_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_CUSTOM, WORKLOAD_PPLIB_CUSTOM_BIT), |
| }; |
| |
| static const uint8_t sienna_cichlid_throttler_map[] = { |
| [THROTTLER_TEMP_EDGE_BIT] = (SMU_THROTTLER_TEMP_EDGE_BIT), |
| [THROTTLER_TEMP_HOTSPOT_BIT] = (SMU_THROTTLER_TEMP_HOTSPOT_BIT), |
| [THROTTLER_TEMP_MEM_BIT] = (SMU_THROTTLER_TEMP_MEM_BIT), |
| [THROTTLER_TEMP_VR_GFX_BIT] = (SMU_THROTTLER_TEMP_VR_GFX_BIT), |
| [THROTTLER_TEMP_VR_MEM0_BIT] = (SMU_THROTTLER_TEMP_VR_MEM0_BIT), |
| [THROTTLER_TEMP_VR_MEM1_BIT] = (SMU_THROTTLER_TEMP_VR_MEM1_BIT), |
| [THROTTLER_TEMP_VR_SOC_BIT] = (SMU_THROTTLER_TEMP_VR_SOC_BIT), |
| [THROTTLER_TEMP_LIQUID0_BIT] = (SMU_THROTTLER_TEMP_LIQUID0_BIT), |
| [THROTTLER_TEMP_LIQUID1_BIT] = (SMU_THROTTLER_TEMP_LIQUID1_BIT), |
| [THROTTLER_TDC_GFX_BIT] = (SMU_THROTTLER_TDC_GFX_BIT), |
| [THROTTLER_TDC_SOC_BIT] = (SMU_THROTTLER_TDC_SOC_BIT), |
| [THROTTLER_PPT0_BIT] = (SMU_THROTTLER_PPT0_BIT), |
| [THROTTLER_PPT1_BIT] = (SMU_THROTTLER_PPT1_BIT), |
| [THROTTLER_PPT2_BIT] = (SMU_THROTTLER_PPT2_BIT), |
| [THROTTLER_PPT3_BIT] = (SMU_THROTTLER_PPT3_BIT), |
| [THROTTLER_FIT_BIT] = (SMU_THROTTLER_FIT_BIT), |
| [THROTTLER_PPM_BIT] = (SMU_THROTTLER_PPM_BIT), |
| [THROTTLER_APCC_BIT] = (SMU_THROTTLER_APCC_BIT), |
| }; |
| |
| static int |
| sienna_cichlid_get_allowed_feature_mask(struct smu_context *smu, |
| uint32_t *feature_mask, uint32_t num) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| memset(feature_mask, 0, sizeof(uint32_t) * num); |
| |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) |
| | FEATURE_MASK(FEATURE_DPM_FCLK_BIT) |
| | FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_SOCCLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_DCEFCLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_FCLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_UCLK_BIT) |
| | FEATURE_MASK(FEATURE_FW_DSTATE_BIT) |
| | FEATURE_MASK(FEATURE_DF_CSTATE_BIT) |
| | FEATURE_MASK(FEATURE_RSMU_SMN_CG_BIT) |
| | FEATURE_MASK(FEATURE_GFX_SS_BIT) |
| | FEATURE_MASK(FEATURE_VR0HOT_BIT) |
| | FEATURE_MASK(FEATURE_PPT_BIT) |
| | FEATURE_MASK(FEATURE_TDC_BIT) |
| | FEATURE_MASK(FEATURE_BACO_BIT) |
| | FEATURE_MASK(FEATURE_APCC_DFLL_BIT) |
| | FEATURE_MASK(FEATURE_FW_CTF_BIT) |
| | FEATURE_MASK(FEATURE_FAN_CONTROL_BIT) |
| | FEATURE_MASK(FEATURE_THERMAL_BIT) |
| | FEATURE_MASK(FEATURE_OUT_OF_BAND_MONITOR_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DPM_MASK) { |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT); |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_GFX_GPO_BIT); |
| } |
| |
| if ((adev->pm.pp_feature & PP_GFX_DCS_MASK) && |
| (adev->ip_versions[MP1_HWIP][0] > IP_VERSION(11, 0, 7)) && |
| !(adev->flags & AMD_IS_APU)) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFX_DCS_BIT); |
| |
| if (adev->pm.pp_feature & PP_MCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_UCLK_BIT) |
| | FEATURE_MASK(FEATURE_MEM_VDDCI_SCALING_BIT) |
| | FEATURE_MASK(FEATURE_MEM_MVDD_SCALING_BIT); |
| |
| if (adev->pm.pp_feature & PP_PCIE_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_LINK_BIT); |
| |
| if (adev->pm.pp_feature & PP_DCEFCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_SOCCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_ULV_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFX_ULV_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DEEP_SLEEP_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DS_GFXCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_GFXOFF_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFXOFF_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_ATHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_ATHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_MMHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_MMHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_VCN || |
| smu->adev->pg_flags & AMD_PG_SUPPORT_JPEG) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_MM_DPM_PG_BIT); |
| |
| if (smu->dc_controlled_by_gpio) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_ACDC_BIT); |
| |
| if (amdgpu_device_should_use_aspm(adev)) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DS_LCLK_BIT); |
| |
| return 0; |
| } |
| |
| static void sienna_cichlid_check_bxco_support(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_7_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| struct smu_baco_context *smu_baco = &smu->smu_baco; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t val; |
| |
| if (powerplay_table->platform_caps & SMU_11_0_7_PP_PLATFORM_CAP_BACO) { |
| val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0); |
| smu_baco->platform_support = |
| (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : |
| false; |
| } |
| } |
| |
| static void sienna_cichlid_check_fan_support(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| uint64_t features = *(uint64_t *) pptable->FeaturesToRun; |
| |
| /* Fan control is not possible if PPTable has it disabled */ |
| smu->adev->pm.no_fan = |
| !(features & (1ULL << FEATURE_FAN_CONTROL_BIT)); |
| if (smu->adev->pm.no_fan) |
| dev_info_once(smu->adev->dev, |
| "PMFW based fan control disabled"); |
| } |
| |
| static int sienna_cichlid_check_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_7_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| |
| if (powerplay_table->platform_caps & SMU_11_0_7_PP_PLATFORM_CAP_HARDWAREDC) |
| smu->dc_controlled_by_gpio = true; |
| |
| sienna_cichlid_check_bxco_support(smu); |
| sienna_cichlid_check_fan_support(smu); |
| |
| table_context->thermal_controller_type = |
| powerplay_table->thermal_controller_type; |
| |
| /* |
| * Instead of having its own buffer space and get overdrive_table copied, |
| * smu->od_settings just points to the actual overdrive_table |
| */ |
| smu->od_settings = &powerplay_table->overdrive_table; |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_append_powerplay_table(struct smu_context *smu) |
| { |
| struct atom_smc_dpm_info_v4_9 *smc_dpm_table; |
| int index, ret; |
| I2cControllerConfig_t *table_member; |
| |
| index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, |
| smc_dpm_info); |
| |
| ret = amdgpu_atombios_get_data_table(smu->adev, index, NULL, NULL, NULL, |
| (uint8_t **)&smc_dpm_table); |
| if (ret) |
| return ret; |
| GET_PPTABLE_MEMBER(I2cControllers, &table_member); |
| memcpy(table_member, smc_dpm_table->I2cControllers, |
| sizeof(*smc_dpm_table) - sizeof(smc_dpm_table->table_header)); |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_store_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_7_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| int table_size; |
| |
| table_size = get_table_size(smu); |
| memcpy(table_context->driver_pptable, &powerplay_table->smc_pptable, |
| table_size); |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_patch_pptable_quirk(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t *board_reserved; |
| uint16_t *freq_table_gfx; |
| uint32_t i; |
| |
| /* Fix some OEM SKU specific stability issues */ |
| GET_PPTABLE_MEMBER(BoardReserved, &board_reserved); |
| if ((adev->pdev->device == 0x73DF) && |
| (adev->pdev->revision == 0XC3) && |
| (adev->pdev->subsystem_device == 0x16C2) && |
| (adev->pdev->subsystem_vendor == 0x1043)) |
| board_reserved[0] = 1387; |
| |
| GET_PPTABLE_MEMBER(FreqTableGfx, &freq_table_gfx); |
| if ((adev->pdev->device == 0x73DF) && |
| (adev->pdev->revision == 0XC3) && |
| ((adev->pdev->subsystem_device == 0x16C2) || |
| (adev->pdev->subsystem_device == 0x133C)) && |
| (adev->pdev->subsystem_vendor == 0x1043)) { |
| for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) { |
| if (freq_table_gfx[i] > 2500) |
| freq_table_gfx[i] = 2500; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_setup_pptable(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_v11_0_setup_pptable(smu); |
| if (ret) |
| return ret; |
| |
| ret = sienna_cichlid_store_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = sienna_cichlid_append_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = sienna_cichlid_check_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| return sienna_cichlid_patch_pptable_quirk(smu); |
| } |
| |
| static int sienna_cichlid_tables_init(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *tables = smu_table->tables; |
| int table_size; |
| |
| table_size = get_table_size(smu); |
| SMU_TABLE_INIT(tables, SMU_TABLE_PPTABLE, table_size, |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetricsExternal_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_I2C_COMMANDS, sizeof(SwI2cRequest_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_OVERDRIVE, sizeof(OverDriveTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_PMSTATUSLOG, SMU11_TOOL_SIZE, |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| sizeof(DpmActivityMonitorCoeffIntExternal_t), PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_ECCINFO, sizeof(EccInfoTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_DRIVER_SMU_CONFIG, sizeof(DriverSmuConfigExternal_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| smu_table->metrics_table = kzalloc(sizeof(SmuMetricsExternal_t), GFP_KERNEL); |
| if (!smu_table->metrics_table) |
| goto err0_out; |
| smu_table->metrics_time = 0; |
| |
| smu_table->gpu_metrics_table_size = sizeof(struct gpu_metrics_v1_3); |
| smu_table->gpu_metrics_table = kzalloc(smu_table->gpu_metrics_table_size, GFP_KERNEL); |
| if (!smu_table->gpu_metrics_table) |
| goto err1_out; |
| |
| smu_table->watermarks_table = kzalloc(sizeof(Watermarks_t), GFP_KERNEL); |
| if (!smu_table->watermarks_table) |
| goto err2_out; |
| |
| smu_table->ecc_table = kzalloc(tables[SMU_TABLE_ECCINFO].size, GFP_KERNEL); |
| if (!smu_table->ecc_table) |
| goto err3_out; |
| |
| smu_table->driver_smu_config_table = |
| kzalloc(tables[SMU_TABLE_DRIVER_SMU_CONFIG].size, GFP_KERNEL); |
| if (!smu_table->driver_smu_config_table) |
| goto err4_out; |
| |
| return 0; |
| |
| err4_out: |
| kfree(smu_table->ecc_table); |
| err3_out: |
| kfree(smu_table->watermarks_table); |
| err2_out: |
| kfree(smu_table->gpu_metrics_table); |
| err1_out: |
| kfree(smu_table->metrics_table); |
| err0_out: |
| return -ENOMEM; |
| } |
| |
| static uint32_t sienna_cichlid_get_throttler_status_locked(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table= &smu->smu_table; |
| SmuMetricsExternal_t *metrics_ext = |
| (SmuMetricsExternal_t *)(smu_table->metrics_table); |
| uint32_t throttler_status = 0; |
| int i; |
| |
| if ((smu->adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && |
| (smu->smc_fw_version >= 0x3A4900)) { |
| for (i = 0; i < THROTTLER_COUNT; i++) |
| throttler_status |= |
| (metrics_ext->SmuMetrics_V3.ThrottlingPercentage[i] ? 1U << i : 0); |
| } else if ((smu->adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && |
| (smu->smc_fw_version >= 0x3A4300)) { |
| for (i = 0; i < THROTTLER_COUNT; i++) |
| throttler_status |= |
| (metrics_ext->SmuMetrics_V2.ThrottlingPercentage[i] ? 1U << i : 0); |
| } else { |
| throttler_status = metrics_ext->SmuMetrics.ThrottlerStatus; |
| } |
| |
| return throttler_status; |
| } |
| |
| static int sienna_cichlid_get_power_limit(struct smu_context *smu, |
| uint32_t *current_power_limit, |
| uint32_t *default_power_limit, |
| uint32_t *max_power_limit) |
| { |
| struct smu_11_0_7_powerplay_table *powerplay_table = |
| (struct smu_11_0_7_powerplay_table *)smu->smu_table.power_play_table; |
| uint32_t power_limit, od_percent; |
| uint16_t *table_member; |
| |
| GET_PPTABLE_MEMBER(SocketPowerLimitAc, &table_member); |
| |
| if (smu_v11_0_get_current_power_limit(smu, &power_limit)) { |
| power_limit = |
| table_member[PPT_THROTTLER_PPT0]; |
| } |
| |
| if (current_power_limit) |
| *current_power_limit = power_limit; |
| if (default_power_limit) |
| *default_power_limit = power_limit; |
| |
| if (max_power_limit) { |
| if (smu->od_enabled) { |
| od_percent = |
| le32_to_cpu(powerplay_table->overdrive_table.max[ |
| SMU_11_0_7_ODSETTING_POWERPERCENTAGE]); |
| |
| dev_dbg(smu->adev->dev, "ODSETTING_POWERPERCENTAGE: %d (default: %d)\n", |
| od_percent, power_limit); |
| |
| power_limit *= (100 + od_percent); |
| power_limit /= 100; |
| } |
| *max_power_limit = power_limit; |
| } |
| |
| return 0; |
| } |
| |
| static void sienna_cichlid_get_smartshift_power_percentage(struct smu_context *smu, |
| uint32_t *apu_percent, |
| uint32_t *dgpu_percent) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| SmuMetrics_V4_t *metrics_v4 = |
| &(((SmuMetricsExternal_t *)(smu_table->metrics_table))->SmuMetrics_V4); |
| uint16_t powerRatio = 0; |
| uint16_t apu_power_limit = 0; |
| uint16_t dgpu_power_limit = 0; |
| uint32_t apu_boost = 0; |
| uint32_t dgpu_boost = 0; |
| uint32_t cur_power_limit; |
| |
| if (metrics_v4->ApuSTAPMSmartShiftLimit != 0) { |
| sienna_cichlid_get_power_limit(smu, &cur_power_limit, NULL, NULL); |
| apu_power_limit = metrics_v4->ApuSTAPMLimit; |
| dgpu_power_limit = cur_power_limit; |
| powerRatio = (((apu_power_limit + |
| dgpu_power_limit) * 100) / |
| metrics_v4->ApuSTAPMSmartShiftLimit); |
| if (powerRatio > 100) { |
| apu_power_limit = (apu_power_limit * 100) / |
| powerRatio; |
| dgpu_power_limit = (dgpu_power_limit * 100) / |
| powerRatio; |
| } |
| if (metrics_v4->AverageApuSocketPower > apu_power_limit && |
| apu_power_limit != 0) { |
| apu_boost = ((metrics_v4->AverageApuSocketPower - |
| apu_power_limit) * 100) / |
| apu_power_limit; |
| if (apu_boost > 100) |
| apu_boost = 100; |
| } |
| |
| if (metrics_v4->AverageSocketPower > dgpu_power_limit && |
| dgpu_power_limit != 0) { |
| dgpu_boost = ((metrics_v4->AverageSocketPower - |
| dgpu_power_limit) * 100) / |
| dgpu_power_limit; |
| if (dgpu_boost > 100) |
| dgpu_boost = 100; |
| } |
| |
| if (dgpu_boost >= apu_boost) |
| apu_boost = 0; |
| else |
| dgpu_boost = 0; |
| } |
| *apu_percent = apu_boost; |
| *dgpu_percent = dgpu_boost; |
| } |
| |
| static int sienna_cichlid_get_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table= &smu->smu_table; |
| SmuMetrics_t *metrics = |
| &(((SmuMetricsExternal_t *)(smu_table->metrics_table))->SmuMetrics); |
| SmuMetrics_V2_t *metrics_v2 = |
| &(((SmuMetricsExternal_t *)(smu_table->metrics_table))->SmuMetrics_V2); |
| SmuMetrics_V3_t *metrics_v3 = |
| &(((SmuMetricsExternal_t *)(smu_table->metrics_table))->SmuMetrics_V3); |
| bool use_metrics_v2 = false; |
| bool use_metrics_v3 = false; |
| uint16_t average_gfx_activity; |
| int ret = 0; |
| uint32_t apu_percent = 0; |
| uint32_t dgpu_percent = 0; |
| |
| switch (smu->adev->ip_versions[MP1_HWIP][0]) { |
| case IP_VERSION(11, 0, 7): |
| if (smu->smc_fw_version >= 0x3A4900) |
| use_metrics_v3 = true; |
| else if (smu->smc_fw_version >= 0x3A4300) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 11): |
| if (smu->smc_fw_version >= 0x412D00) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 12): |
| if (smu->smc_fw_version >= 0x3B2300) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 13): |
| if (smu->smc_fw_version >= 0x491100) |
| use_metrics_v2 = true; |
| break; |
| default: |
| break; |
| } |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| false); |
| if (ret) |
| return ret; |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_GFXCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_GFXCLK] : |
| metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_SOCCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_SOCCLK] : |
| metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_UCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_UCLK] : |
| metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_VCLK_0] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_VCLK_0] : |
| metrics->CurrClock[PPCLK_VCLK_0]; |
| break; |
| case METRICS_CURR_VCLK1: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_VCLK_1] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_VCLK_1] : |
| metrics->CurrClock[PPCLK_VCLK_1]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_DCLK_0] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_DCLK_0] : |
| metrics->CurrClock[PPCLK_DCLK_0]; |
| break; |
| case METRICS_CURR_DCLK1: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_DCLK_1] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_DCLK_1] : |
| metrics->CurrClock[PPCLK_DCLK_1]; |
| break; |
| case METRICS_CURR_DCEFCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_DCEFCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_DCEFCLK] : |
| metrics->CurrClock[PPCLK_DCEFCLK]; |
| break; |
| case METRICS_CURR_FCLK: |
| *value = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_FCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_FCLK] : |
| metrics->CurrClock[PPCLK_FCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| average_gfx_activity = use_metrics_v3 ? metrics_v3->AverageGfxActivity : |
| use_metrics_v2 ? metrics_v2->AverageGfxActivity : |
| metrics->AverageGfxActivity; |
| if (average_gfx_activity <= SMU_11_0_7_GFX_BUSY_THRESHOLD) |
| *value = use_metrics_v3 ? metrics_v3->AverageGfxclkFrequencyPostDs : |
| use_metrics_v2 ? metrics_v2->AverageGfxclkFrequencyPostDs : |
| metrics->AverageGfxclkFrequencyPostDs; |
| else |
| *value = use_metrics_v3 ? metrics_v3->AverageGfxclkFrequencyPreDs : |
| use_metrics_v2 ? metrics_v2->AverageGfxclkFrequencyPreDs : |
| metrics->AverageGfxclkFrequencyPreDs; |
| break; |
| case METRICS_AVERAGE_FCLK: |
| *value = use_metrics_v3 ? metrics_v3->AverageFclkFrequencyPostDs : |
| use_metrics_v2 ? metrics_v2->AverageFclkFrequencyPostDs : |
| metrics->AverageFclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = use_metrics_v3 ? metrics_v3->AverageUclkFrequencyPostDs : |
| use_metrics_v2 ? metrics_v2->AverageUclkFrequencyPostDs : |
| metrics->AverageUclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = use_metrics_v3 ? metrics_v3->AverageGfxActivity : |
| use_metrics_v2 ? metrics_v2->AverageGfxActivity : |
| metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = use_metrics_v3 ? metrics_v3->AverageUclkActivity : |
| use_metrics_v2 ? metrics_v2->AverageUclkActivity : |
| metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = use_metrics_v3 ? metrics_v3->AverageSocketPower << 8 : |
| use_metrics_v2 ? metrics_v2->AverageSocketPower << 8 : |
| metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = (use_metrics_v3 ? metrics_v3->TemperatureEdge : |
| use_metrics_v2 ? metrics_v2->TemperatureEdge : |
| metrics->TemperatureEdge) * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = (use_metrics_v3 ? metrics_v3->TemperatureHotspot : |
| use_metrics_v2 ? metrics_v2->TemperatureHotspot : |
| metrics->TemperatureHotspot) * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = (use_metrics_v3 ? metrics_v3->TemperatureMem : |
| use_metrics_v2 ? metrics_v2->TemperatureMem : |
| metrics->TemperatureMem) * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = (use_metrics_v3 ? metrics_v3->TemperatureVrGfx : |
| use_metrics_v2 ? metrics_v2->TemperatureVrGfx : |
| metrics->TemperatureVrGfx) * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = (use_metrics_v3 ? metrics_v3->TemperatureVrSoc : |
| use_metrics_v2 ? metrics_v2->TemperatureVrSoc : |
| metrics->TemperatureVrSoc) * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = sienna_cichlid_get_throttler_status_locked(smu); |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = use_metrics_v3 ? metrics_v3->CurrFanSpeed : |
| use_metrics_v2 ? metrics_v2->CurrFanSpeed : metrics->CurrFanSpeed; |
| break; |
| case METRICS_UNIQUE_ID_UPPER32: |
| /* Only supported in 0x3A5300+, metrics_v3 requires 0x3A4900+ */ |
| *value = use_metrics_v3 ? metrics_v3->PublicSerialNumUpper32 : 0; |
| break; |
| case METRICS_UNIQUE_ID_LOWER32: |
| /* Only supported in 0x3A5300+, metrics_v3 requires 0x3A4900+ */ |
| *value = use_metrics_v3 ? metrics_v3->PublicSerialNumLower32 : 0; |
| break; |
| case METRICS_SS_APU_SHARE: |
| sienna_cichlid_get_smartshift_power_percentage(smu, &apu_percent, &dgpu_percent); |
| *value = apu_percent; |
| break; |
| case METRICS_SS_DGPU_SHARE: |
| sienna_cichlid_get_smartshift_power_percentage(smu, &apu_percent, &dgpu_percent); |
| *value = dgpu_percent; |
| break; |
| |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| return ret; |
| |
| } |
| |
| static int sienna_cichlid_allocate_dpm_context(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| |
| smu_dpm->dpm_context = kzalloc(sizeof(struct smu_11_0_dpm_context), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_context) |
| return -ENOMEM; |
| |
| smu_dpm->dpm_context_size = sizeof(struct smu_11_0_dpm_context); |
| |
| return 0; |
| } |
| |
| static void sienna_cichlid_stb_init(struct smu_context *smu); |
| |
| static int sienna_cichlid_init_smc_tables(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| ret = sienna_cichlid_tables_init(smu); |
| if (ret) |
| return ret; |
| |
| ret = sienna_cichlid_allocate_dpm_context(smu); |
| if (ret) |
| return ret; |
| |
| if (!amdgpu_sriov_vf(adev)) |
| sienna_cichlid_stb_init(smu); |
| |
| return smu_v11_0_init_smc_tables(smu); |
| } |
| |
| static int sienna_cichlid_set_default_dpm_table(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| struct smu_11_0_dpm_table *dpm_table; |
| struct amdgpu_device *adev = smu->adev; |
| int i, ret = 0; |
| DpmDescriptor_t *table_member; |
| |
| /* socclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.soc_table; |
| GET_PPTABLE_MEMBER(DpmDescriptor, &table_member); |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_SOCCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_SOCCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.socclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* gfxclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.gfx_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_GFXCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_GFXCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.gfxclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* uclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.uclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_UCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_UCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.uclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* fclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.fclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_FCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_FCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_FCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.fclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* vclk0/1 dpm table setup */ |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { |
| if (adev->vcn.harvest_config & (1 << i)) |
| continue; |
| |
| dpm_table = &dpm_context->dpm_tables.vclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_MM_DPM_PG_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| i ? SMU_VCLK1 : SMU_VCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[i ? PPCLK_VCLK_1 : PPCLK_VCLK_0].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.vclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| } |
| |
| /* dclk0/1 dpm table setup */ |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { |
| if (adev->vcn.harvest_config & (1 << i)) |
| continue; |
| dpm_table = &dpm_context->dpm_tables.dclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_MM_DPM_PG_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| i ? SMU_DCLK1 : SMU_DCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[i ? PPCLK_DCLK_1 : PPCLK_DCLK_0].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| } |
| |
| /* dcefclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.dcef_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_DCEFCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_DCEFCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* pixelclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.pixel_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_PIXCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_PIXCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* displayclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.display_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_DISPCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_DISPCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* phyclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.phy_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_PHYCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !table_member[PPCLK_PHYCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_dpm_set_vcn_enable(struct smu_context *smu, bool enable) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int i, ret = 0; |
| |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { |
| if (adev->vcn.harvest_config & (1 << i)) |
| continue; |
| /* vcn dpm on is a prerequisite for vcn power gate messages */ |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_MM_DPM_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, enable ? |
| SMU_MSG_PowerUpVcn : SMU_MSG_PowerDownVcn, |
| 0x10000 * i, NULL); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_dpm_set_jpeg_enable(struct smu_context *smu, bool enable) |
| { |
| int ret = 0; |
| |
| if (enable) { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_MM_DPM_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_PowerUpJpeg, 0, NULL); |
| if (ret) |
| return ret; |
| } |
| } else { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_MM_DPM_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_PowerDownJpeg, 0, NULL); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_get_current_clk_freq_by_table(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *value) |
| { |
| MetricsMember_t member_type; |
| int clk_id = 0; |
| |
| clk_id = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_CLK, |
| clk_type); |
| if (clk_id < 0) |
| return clk_id; |
| |
| switch (clk_id) { |
| case PPCLK_GFXCLK: |
| member_type = METRICS_CURR_GFXCLK; |
| break; |
| case PPCLK_UCLK: |
| member_type = METRICS_CURR_UCLK; |
| break; |
| case PPCLK_SOCCLK: |
| member_type = METRICS_CURR_SOCCLK; |
| break; |
| case PPCLK_FCLK: |
| member_type = METRICS_CURR_FCLK; |
| break; |
| case PPCLK_VCLK_0: |
| member_type = METRICS_CURR_VCLK; |
| break; |
| case PPCLK_VCLK_1: |
| member_type = METRICS_CURR_VCLK1; |
| break; |
| case PPCLK_DCLK_0: |
| member_type = METRICS_CURR_DCLK; |
| break; |
| case PPCLK_DCLK_1: |
| member_type = METRICS_CURR_DCLK1; |
| break; |
| case PPCLK_DCEFCLK: |
| member_type = METRICS_CURR_DCEFCLK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return sienna_cichlid_get_smu_metrics_data(smu, |
| member_type, |
| value); |
| |
| } |
| |
| static bool sienna_cichlid_is_support_fine_grained_dpm(struct smu_context *smu, enum smu_clk_type clk_type) |
| { |
| DpmDescriptor_t *dpm_desc = NULL; |
| DpmDescriptor_t *table_member; |
| uint32_t clk_index = 0; |
| |
| GET_PPTABLE_MEMBER(DpmDescriptor, &table_member); |
| clk_index = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_CLK, |
| clk_type); |
| dpm_desc = &table_member[clk_index]; |
| |
| /* 0 - Fine grained DPM, 1 - Discrete DPM */ |
| return dpm_desc->SnapToDiscrete == 0; |
| } |
| |
| static bool sienna_cichlid_is_od_feature_supported(struct smu_11_0_7_overdrive_table *od_table, |
| enum SMU_11_0_7_ODFEATURE_CAP cap) |
| { |
| return od_table->cap[cap]; |
| } |
| |
| static void sienna_cichlid_get_od_setting_range(struct smu_11_0_7_overdrive_table *od_table, |
| enum SMU_11_0_7_ODSETTING_ID setting, |
| uint32_t *min, uint32_t *max) |
| { |
| if (min) |
| *min = od_table->min[setting]; |
| if (max) |
| *max = od_table->max[setting]; |
| } |
| |
| static int sienna_cichlid_print_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, char *buf) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| uint16_t *table_member; |
| |
| struct smu_11_0_7_overdrive_table *od_settings = smu->od_settings; |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)table_context->overdrive_table; |
| int i, size = 0, ret = 0; |
| uint32_t cur_value = 0, value = 0, count = 0; |
| uint32_t freq_values[3] = {0}; |
| uint32_t mark_index = 0; |
| uint32_t gen_speed, lane_width; |
| uint32_t min_value, max_value; |
| uint32_t smu_version; |
| |
| smu_cmn_get_sysfs_buf(&buf, &size); |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| case SMU_VCLK: |
| case SMU_VCLK1: |
| case SMU_DCLK: |
| case SMU_DCLK1: |
| case SMU_DCEFCLK: |
| ret = sienna_cichlid_get_current_clk_freq_by_table(smu, clk_type, &cur_value); |
| if (ret) |
| goto print_clk_out; |
| |
| ret = smu_v11_0_get_dpm_level_count(smu, clk_type, &count); |
| if (ret) |
| goto print_clk_out; |
| |
| if (!sienna_cichlid_is_support_fine_grained_dpm(smu, clk_type)) { |
| for (i = 0; i < count; i++) { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, i, &value); |
| if (ret) |
| goto print_clk_out; |
| |
| size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, value, |
| cur_value == value ? "*" : ""); |
| } |
| } else { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, 0, &freq_values[0]); |
| if (ret) |
| goto print_clk_out; |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, count - 1, &freq_values[2]); |
| if (ret) |
| goto print_clk_out; |
| |
| freq_values[1] = cur_value; |
| mark_index = cur_value == freq_values[0] ? 0 : |
| cur_value == freq_values[2] ? 2 : 1; |
| |
| count = 3; |
| if (mark_index != 1) { |
| count = 2; |
| freq_values[1] = freq_values[2]; |
| } |
| |
| for (i = 0; i < count; i++) { |
| size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, freq_values[i], |
| cur_value == freq_values[i] ? "*" : ""); |
| } |
| |
| } |
| break; |
| case SMU_PCIE: |
| gen_speed = smu_v11_0_get_current_pcie_link_speed_level(smu); |
| lane_width = smu_v11_0_get_current_pcie_link_width_level(smu); |
| GET_PPTABLE_MEMBER(LclkFreq, &table_member); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| size += sysfs_emit_at(buf, size, "%d: %s %s %dMhz %s\n", i, |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 0) ? "2.5GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 1) ? "5.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 2) ? "8.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 3) ? "16.0GT/s," : "", |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 1) ? "x1" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 2) ? "x2" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 3) ? "x4" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 4) ? "x8" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 5) ? "x12" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 6) ? "x16" : "", |
| table_member[i], |
| (gen_speed == dpm_context->dpm_tables.pcie_table.pcie_gen[i]) && |
| (lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ? |
| "*" : ""); |
| break; |
| case SMU_OD_SCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| |
| if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) |
| break; |
| |
| size += sysfs_emit_at(buf, size, "OD_SCLK:\n"); |
| size += sysfs_emit_at(buf, size, "0: %uMhz\n1: %uMhz\n", od_table->GfxclkFmin, od_table->GfxclkFmax); |
| break; |
| |
| case SMU_OD_MCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| |
| if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) |
| break; |
| |
| size += sysfs_emit_at(buf, size, "OD_MCLK:\n"); |
| size += sysfs_emit_at(buf, size, "0: %uMhz\n1: %uMHz\n", od_table->UclkFmin, od_table->UclkFmax); |
| break; |
| |
| case SMU_OD_VDDGFX_OFFSET: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| |
| /* |
| * OD GFX Voltage Offset functionality is supported only by 58.41.0 |
| * and onwards SMU firmwares. |
| */ |
| smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && |
| (smu_version < 0x003a2900)) |
| break; |
| |
| size += sysfs_emit_at(buf, size, "OD_VDDGFX_OFFSET:\n"); |
| size += sysfs_emit_at(buf, size, "%dmV\n", od_table->VddGfxOffset); |
| break; |
| |
| case SMU_OD_RANGE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| |
| size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE"); |
| |
| if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) { |
| sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMIN, |
| &min_value, NULL); |
| sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_GFXCLKFMAX, |
| NULL, &max_value); |
| size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) { |
| sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMIN, |
| &min_value, NULL); |
| sienna_cichlid_get_od_setting_range(od_settings, SMU_11_0_7_ODSETTING_UCLKFMAX, |
| NULL, &max_value); |
| size += sysfs_emit_at(buf, size, "MCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| print_clk_out: |
| return size; |
| } |
| |
| static int sienna_cichlid_force_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, uint32_t mask) |
| { |
| int ret = 0; |
| uint32_t soft_min_level = 0, soft_max_level = 0, min_freq = 0, max_freq = 0; |
| |
| soft_min_level = mask ? (ffs(mask) - 1) : 0; |
| soft_max_level = mask ? (fls(mask) - 1) : 0; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| /* There is only 2 levels for fine grained DPM */ |
| if (sienna_cichlid_is_support_fine_grained_dpm(smu, clk_type)) { |
| soft_max_level = (soft_max_level >= 1 ? 1 : 0); |
| soft_min_level = (soft_min_level >= 1 ? 1 : 0); |
| } |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, soft_min_level, &min_freq); |
| if (ret) |
| goto forec_level_out; |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, soft_max_level, &max_freq); |
| if (ret) |
| goto forec_level_out; |
| |
| ret = smu_v11_0_set_soft_freq_limited_range(smu, clk_type, min_freq, max_freq); |
| if (ret) |
| goto forec_level_out; |
| break; |
| case SMU_DCEFCLK: |
| dev_info(smu->adev->dev,"Setting DCEFCLK min/max dpm level is not supported!\n"); |
| break; |
| default: |
| break; |
| } |
| |
| forec_level_out: |
| return 0; |
| } |
| |
| static int sienna_cichlid_populate_umd_state_clk(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = |
| smu->smu_dpm.dpm_context; |
| struct smu_11_0_dpm_table *gfx_table = |
| &dpm_context->dpm_tables.gfx_table; |
| struct smu_11_0_dpm_table *mem_table = |
| &dpm_context->dpm_tables.uclk_table; |
| struct smu_11_0_dpm_table *soc_table = |
| &dpm_context->dpm_tables.soc_table; |
| struct smu_umd_pstate_table *pstate_table = |
| &smu->pstate_table; |
| struct amdgpu_device *adev = smu->adev; |
| |
| pstate_table->gfxclk_pstate.min = gfx_table->min; |
| pstate_table->gfxclk_pstate.peak = gfx_table->max; |
| |
| pstate_table->uclk_pstate.min = mem_table->min; |
| pstate_table->uclk_pstate.peak = mem_table->max; |
| |
| pstate_table->socclk_pstate.min = soc_table->min; |
| pstate_table->socclk_pstate.peak = soc_table->max; |
| |
| switch (adev->ip_versions[MP1_HWIP][0]) { |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 11): |
| pstate_table->gfxclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_GFXCLK; |
| pstate_table->uclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_MEMCLK; |
| pstate_table->socclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_SOCCLK; |
| break; |
| case IP_VERSION(11, 0, 12): |
| pstate_table->gfxclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_GFXCLK; |
| pstate_table->uclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_MEMCLK; |
| pstate_table->socclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_SOCCLK; |
| break; |
| case IP_VERSION(11, 0, 13): |
| pstate_table->gfxclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_GFXCLK; |
| pstate_table->uclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_MEMCLK; |
| pstate_table->socclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_SOCCLK; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_pre_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t max_freq = 0; |
| |
| /* Sienna_Cichlid do not support to change display num currently */ |
| return 0; |
| #if 0 |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, 0, NULL); |
| if (ret) |
| return ret; |
| #endif |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_get_dpm_ultimate_freq(smu, SMU_UCLK, NULL, &max_freq); |
| if (ret) |
| return ret; |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, 0, max_freq); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT) && |
| smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| #if 0 |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, |
| smu->display_config->num_display, |
| NULL); |
| #endif |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static bool sienna_cichlid_is_dpm_running(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint64_t feature_enabled; |
| |
| ret = smu_cmn_get_enabled_mask(smu, &feature_enabled); |
| if (ret) |
| return false; |
| |
| return !!(feature_enabled & SMC_DPM_FEATURE); |
| } |
| |
| static int sienna_cichlid_get_fan_speed_rpm(struct smu_context *smu, |
| uint32_t *speed) |
| { |
| if (!speed) |
| return -EINVAL; |
| |
| /* |
| * For Sienna_Cichlid and later, the fan speed(rpm) reported |
| * by pmfw is always trustable(even when the fan control feature |
| * disabled or 0 RPM kicked in). |
| */ |
| return sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_CURR_FANSPEED, |
| speed); |
| } |
| |
| static int sienna_cichlid_get_fan_parameters(struct smu_context *smu) |
| { |
| uint16_t *table_member; |
| |
| GET_PPTABLE_MEMBER(FanMaximumRpm, &table_member); |
| smu->fan_max_rpm = *table_member; |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_get_power_profile_mode(struct smu_context *smu, char *buf) |
| { |
| DpmActivityMonitorCoeffIntExternal_t activity_monitor_external; |
| DpmActivityMonitorCoeffInt_t *activity_monitor = |
| &(activity_monitor_external.DpmActivityMonitorCoeffInt); |
| uint32_t i, size = 0; |
| int16_t workload_type = 0; |
| static const char *title[] = { |
| "PROFILE_INDEX(NAME)", |
| "CLOCK_TYPE(NAME)", |
| "FPS", |
| "MinFreqType", |
| "MinActiveFreqType", |
| "MinActiveFreq", |
| "BoosterFreqType", |
| "BoosterFreq", |
| "PD_Data_limit_c", |
| "PD_Data_error_coeff", |
| "PD_Data_error_rate_coeff"}; |
| int result = 0; |
| |
| if (!buf) |
| return -EINVAL; |
| |
| size += sysfs_emit_at(buf, size, "%16s %s %s %s %s %s %s %s %s %s %s\n", |
| title[0], title[1], title[2], title[3], title[4], title[5], |
| title[6], title[7], title[8], title[9], title[10]); |
| |
| for (i = 0; i <= PP_SMC_POWER_PROFILE_CUSTOM; i++) { |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| i); |
| if (workload_type < 0) |
| return -EINVAL; |
| |
| result = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, workload_type, |
| (void *)(&activity_monitor_external), false); |
| if (result) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return result; |
| } |
| |
| size += sysfs_emit_at(buf, size, "%2d %14s%s:\n", |
| i, amdgpu_pp_profile_name[i], (i == smu->power_profile_mode) ? "*" : " "); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 0, |
| "GFXCLK", |
| activity_monitor->Gfx_FPS, |
| activity_monitor->Gfx_MinFreqStep, |
| activity_monitor->Gfx_MinActiveFreqType, |
| activity_monitor->Gfx_MinActiveFreq, |
| activity_monitor->Gfx_BoosterFreqType, |
| activity_monitor->Gfx_BoosterFreq, |
| activity_monitor->Gfx_PD_Data_limit_c, |
| activity_monitor->Gfx_PD_Data_error_coeff, |
| activity_monitor->Gfx_PD_Data_error_rate_coeff); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 1, |
| "SOCCLK", |
| activity_monitor->Fclk_FPS, |
| activity_monitor->Fclk_MinFreqStep, |
| activity_monitor->Fclk_MinActiveFreqType, |
| activity_monitor->Fclk_MinActiveFreq, |
| activity_monitor->Fclk_BoosterFreqType, |
| activity_monitor->Fclk_BoosterFreq, |
| activity_monitor->Fclk_PD_Data_limit_c, |
| activity_monitor->Fclk_PD_Data_error_coeff, |
| activity_monitor->Fclk_PD_Data_error_rate_coeff); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 2, |
| "MEMLK", |
| activity_monitor->Mem_FPS, |
| activity_monitor->Mem_MinFreqStep, |
| activity_monitor->Mem_MinActiveFreqType, |
| activity_monitor->Mem_MinActiveFreq, |
| activity_monitor->Mem_BoosterFreqType, |
| activity_monitor->Mem_BoosterFreq, |
| activity_monitor->Mem_PD_Data_limit_c, |
| activity_monitor->Mem_PD_Data_error_coeff, |
| activity_monitor->Mem_PD_Data_error_rate_coeff); |
| } |
| |
| return size; |
| } |
| |
| static int sienna_cichlid_set_power_profile_mode(struct smu_context *smu, long *input, uint32_t size) |
| { |
| |
| DpmActivityMonitorCoeffIntExternal_t activity_monitor_external; |
| DpmActivityMonitorCoeffInt_t *activity_monitor = |
| &(activity_monitor_external.DpmActivityMonitorCoeffInt); |
| int workload_type, ret = 0; |
| |
| smu->power_profile_mode = input[size]; |
| |
| if (smu->power_profile_mode > PP_SMC_POWER_PROFILE_CUSTOM) { |
| dev_err(smu->adev->dev, "Invalid power profile mode %d\n", smu->power_profile_mode); |
| return -EINVAL; |
| } |
| |
| if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_CUSTOM) { |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor_external), false); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return ret; |
| } |
| |
| switch (input[0]) { |
| case 0: /* Gfxclk */ |
| activity_monitor->Gfx_FPS = input[1]; |
| activity_monitor->Gfx_MinFreqStep = input[2]; |
| activity_monitor->Gfx_MinActiveFreqType = input[3]; |
| activity_monitor->Gfx_MinActiveFreq = input[4]; |
| activity_monitor->Gfx_BoosterFreqType = input[5]; |
| activity_monitor->Gfx_BoosterFreq = input[6]; |
| activity_monitor->Gfx_PD_Data_limit_c = input[7]; |
| activity_monitor->Gfx_PD_Data_error_coeff = input[8]; |
| activity_monitor->Gfx_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 1: /* Socclk */ |
| activity_monitor->Fclk_FPS = input[1]; |
| activity_monitor->Fclk_MinFreqStep = input[2]; |
| activity_monitor->Fclk_MinActiveFreqType = input[3]; |
| activity_monitor->Fclk_MinActiveFreq = input[4]; |
| activity_monitor->Fclk_BoosterFreqType = input[5]; |
| activity_monitor->Fclk_BoosterFreq = input[6]; |
| activity_monitor->Fclk_PD_Data_limit_c = input[7]; |
| activity_monitor->Fclk_PD_Data_error_coeff = input[8]; |
| activity_monitor->Fclk_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 2: /* Memlk */ |
| activity_monitor->Mem_FPS = input[1]; |
| activity_monitor->Mem_MinFreqStep = input[2]; |
| activity_monitor->Mem_MinActiveFreqType = input[3]; |
| activity_monitor->Mem_MinActiveFreq = input[4]; |
| activity_monitor->Mem_BoosterFreqType = input[5]; |
| activity_monitor->Mem_BoosterFreq = input[6]; |
| activity_monitor->Mem_PD_Data_limit_c = input[7]; |
| activity_monitor->Mem_PD_Data_error_coeff = input[8]; |
| activity_monitor->Mem_PD_Data_error_rate_coeff = input[9]; |
| break; |
| } |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor_external), true); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to set activity monitor!", __func__); |
| return ret; |
| } |
| } |
| |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| smu->power_profile_mode); |
| if (workload_type < 0) |
| return -EINVAL; |
| smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, |
| 1 << workload_type, NULL); |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_notify_smc_display_config(struct smu_context *smu) |
| { |
| struct smu_clocks min_clocks = {0}; |
| struct pp_display_clock_request clock_req; |
| int ret = 0; |
| |
| min_clocks.dcef_clock = smu->display_config->min_dcef_set_clk; |
| min_clocks.dcef_clock_in_sr = smu->display_config->min_dcef_deep_sleep_set_clk; |
| min_clocks.memory_clock = smu->display_config->min_mem_set_clock; |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| clock_req.clock_type = amd_pp_dcef_clock; |
| clock_req.clock_freq_in_khz = min_clocks.dcef_clock * 10; |
| |
| ret = smu_v11_0_display_clock_voltage_request(smu, &clock_req); |
| if (!ret) { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DS_DCEFCLK_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetMinDeepSleepDcefclk, |
| min_clocks.dcef_clock_in_sr/100, |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to set divider for DCEFCLK Failed!"); |
| return ret; |
| } |
| } |
| } else { |
| dev_info(smu->adev->dev, "Attempt to set Hard Min for DCEFCLK Failed!"); |
| } |
| } |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, min_clocks.memory_clock/100, 0); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Set hard min uclk failed!", __func__); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_set_watermarks_table(struct smu_context *smu, |
| struct pp_smu_wm_range_sets *clock_ranges) |
| { |
| Watermarks_t *table = smu->smu_table.watermarks_table; |
| int ret = 0; |
| int i; |
| |
| if (clock_ranges) { |
| if (clock_ranges->num_reader_wm_sets > NUM_WM_RANGES || |
| clock_ranges->num_writer_wm_sets > NUM_WM_RANGES) |
| return -EINVAL; |
| |
| for (i = 0; i < clock_ranges->num_reader_wm_sets; i++) { |
| table->WatermarkRow[WM_DCEFCLK][i].MinClock = |
| clock_ranges->reader_wm_sets[i].min_drain_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MaxClock = |
| clock_ranges->reader_wm_sets[i].max_drain_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MinUclk = |
| clock_ranges->reader_wm_sets[i].min_fill_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MaxUclk = |
| clock_ranges->reader_wm_sets[i].max_fill_clk_mhz; |
| |
| table->WatermarkRow[WM_DCEFCLK][i].WmSetting = |
| clock_ranges->reader_wm_sets[i].wm_inst; |
| } |
| |
| for (i = 0; i < clock_ranges->num_writer_wm_sets; i++) { |
| table->WatermarkRow[WM_SOCCLK][i].MinClock = |
| clock_ranges->writer_wm_sets[i].min_fill_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MaxClock = |
| clock_ranges->writer_wm_sets[i].max_fill_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MinUclk = |
| clock_ranges->writer_wm_sets[i].min_drain_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MaxUclk = |
| clock_ranges->writer_wm_sets[i].max_drain_clk_mhz; |
| |
| table->WatermarkRow[WM_SOCCLK][i].WmSetting = |
| clock_ranges->writer_wm_sets[i].wm_inst; |
| } |
| |
| smu->watermarks_bitmap |= WATERMARKS_EXIST; |
| } |
| |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| !(smu->watermarks_bitmap & WATERMARKS_LOADED)) { |
| ret = smu_cmn_write_watermarks_table(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to update WMTABLE!"); |
| return ret; |
| } |
| smu->watermarks_bitmap |= WATERMARKS_LOADED; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_read_sensor(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| void *data, uint32_t *size) |
| { |
| int ret = 0; |
| uint16_t *temp; |
| struct amdgpu_device *adev = smu->adev; |
| |
| if(!data || !size) |
| return -EINVAL; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_MAX_FAN_RPM: |
| GET_PPTABLE_MEMBER(FanMaximumRpm, &temp); |
| *(uint16_t *)data = *temp; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_MEMACTIVITY, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_GFXACTIVITY, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_POWER: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_SOCKETPOWER, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_HOTSPOT, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_EDGE, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_MEM, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_MCLK: |
| ret = sienna_cichlid_get_current_clk_freq_by_table(smu, SMU_UCLK, (uint32_t *)data); |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_SCLK: |
| ret = sienna_cichlid_get_current_clk_freq_by_table(smu, SMU_GFXCLK, (uint32_t *)data); |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_VDDGFX: |
| ret = smu_v11_0_get_gfx_vdd(smu, (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_SS_APU_SHARE: |
| if (adev->ip_versions[MP1_HWIP][0] != IP_VERSION(11, 0, 7)) { |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_SS_APU_SHARE, (uint32_t *)data); |
| *size = 4; |
| } else { |
| ret = -EOPNOTSUPP; |
| } |
| break; |
| case AMDGPU_PP_SENSOR_SS_DGPU_SHARE: |
| if (adev->ip_versions[MP1_HWIP][0] != IP_VERSION(11, 0, 7)) { |
| ret = sienna_cichlid_get_smu_metrics_data(smu, |
| METRICS_SS_DGPU_SHARE, (uint32_t *)data); |
| *size = 4; |
| } else { |
| ret = -EOPNOTSUPP; |
| } |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void sienna_cichlid_get_unique_id(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t upper32 = 0, lower32 = 0; |
| |
| /* Only supported as of version 0.58.83.0 and only on Sienna Cichlid */ |
| if (smu->smc_fw_version < 0x3A5300 || |
| smu->adev->ip_versions[MP1_HWIP][0] != IP_VERSION(11, 0, 7)) |
| return; |
| |
| if (sienna_cichlid_get_smu_metrics_data(smu, METRICS_UNIQUE_ID_UPPER32, &upper32)) |
| goto out; |
| if (sienna_cichlid_get_smu_metrics_data(smu, METRICS_UNIQUE_ID_LOWER32, &lower32)) |
| goto out; |
| |
| out: |
| |
| adev->unique_id = ((uint64_t)upper32 << 32) | lower32; |
| if (adev->serial[0] == '\0') |
| sprintf(adev->serial, "%016llx", adev->unique_id); |
| } |
| |
| static int sienna_cichlid_get_uclk_dpm_states(struct smu_context *smu, uint32_t *clocks_in_khz, uint32_t *num_states) |
| { |
| uint32_t num_discrete_levels = 0; |
| uint16_t *dpm_levels = NULL; |
| uint16_t i = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| DpmDescriptor_t *table_member1; |
| uint16_t *table_member2; |
| |
| if (!clocks_in_khz || !num_states || !table_context->driver_pptable) |
| return -EINVAL; |
| |
| GET_PPTABLE_MEMBER(DpmDescriptor, &table_member1); |
| num_discrete_levels = table_member1[PPCLK_UCLK].NumDiscreteLevels; |
| GET_PPTABLE_MEMBER(FreqTableUclk, &table_member2); |
| dpm_levels = table_member2; |
| |
| if (num_discrete_levels == 0 || dpm_levels == NULL) |
| return -EINVAL; |
| |
| *num_states = num_discrete_levels; |
| for (i = 0; i < num_discrete_levels; i++) { |
| /* convert to khz */ |
| *clocks_in_khz = (*dpm_levels) * 1000; |
| clocks_in_khz++; |
| dpm_levels++; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_get_thermal_temperature_range(struct smu_context *smu, |
| struct smu_temperature_range *range) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_7_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| uint16_t *table_member; |
| uint16_t temp_edge, temp_hotspot, temp_mem; |
| |
| if (!range) |
| return -EINVAL; |
| |
| memcpy(range, &smu11_thermal_policy[0], sizeof(struct smu_temperature_range)); |
| |
| GET_PPTABLE_MEMBER(TemperatureLimit, &table_member); |
| temp_edge = table_member[TEMP_EDGE]; |
| temp_hotspot = table_member[TEMP_HOTSPOT]; |
| temp_mem = table_member[TEMP_MEM]; |
| |
| range->max = temp_edge * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->edge_emergency_max = (temp_edge + CTF_OFFSET_EDGE) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_crit_max = temp_hotspot * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_emergency_max = (temp_hotspot + CTF_OFFSET_HOTSPOT) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_crit_max = temp_mem * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_emergency_max = (temp_mem + CTF_OFFSET_MEM)* |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| |
| range->software_shutdown_temp = powerplay_table->software_shutdown_temp; |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_display_disable_memory_clock_switch(struct smu_context *smu, |
| bool disable_memory_clock_switch) |
| { |
| int ret = 0; |
| struct smu_11_0_max_sustainable_clocks *max_sustainable_clocks = |
| (struct smu_11_0_max_sustainable_clocks *) |
| smu->smu_table.max_sustainable_clocks; |
| uint32_t min_memory_clock = smu->hard_min_uclk_req_from_dal; |
| uint32_t max_memory_clock = max_sustainable_clocks->uclock; |
| |
| if(smu->disable_uclk_switch == disable_memory_clock_switch) |
| return 0; |
| |
| if(disable_memory_clock_switch) |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, max_memory_clock, 0); |
| else |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, min_memory_clock, 0); |
| |
| if(!ret) |
| smu->disable_uclk_switch = disable_memory_clock_switch; |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_update_pcie_parameters(struct smu_context *smu, |
| uint32_t pcie_gen_cap, |
| uint32_t pcie_width_cap) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| |
| uint32_t smu_pcie_arg; |
| uint8_t *table_member1, *table_member2; |
| int ret, i; |
| |
| GET_PPTABLE_MEMBER(PcieGenSpeed, &table_member1); |
| GET_PPTABLE_MEMBER(PcieLaneCount, &table_member2); |
| |
| /* lclk dpm table setup */ |
| for (i = 0; i < MAX_PCIE_CONF; i++) { |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = table_member1[i]; |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = table_member2[i]; |
| } |
| |
| for (i = 0; i < NUM_LINK_LEVELS; i++) { |
| smu_pcie_arg = (i << 16) | |
| ((table_member1[i] <= pcie_gen_cap) ? |
| (table_member1[i] << 8) : |
| (pcie_gen_cap << 8)) | |
| ((table_member2[i] <= pcie_width_cap) ? |
| table_member2[i] : |
| pcie_width_cap); |
| |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_OverridePcieParameters, |
| smu_pcie_arg, |
| NULL); |
| if (ret) |
| return ret; |
| |
| if (table_member1[i] > pcie_gen_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = pcie_gen_cap; |
| if (table_member2[i] > pcie_width_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = pcie_width_cap; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_get_dpm_ultimate_freq(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *min, uint32_t *max) |
| { |
| return smu_v11_0_get_dpm_ultimate_freq(smu, clk_type, min, max); |
| } |
| |
| static void sienna_cichlid_dump_od_table(struct smu_context *smu, |
| OverDriveTable_t *od_table) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t smu_version; |
| |
| dev_dbg(smu->adev->dev, "OD: Gfxclk: (%d, %d)\n", od_table->GfxclkFmin, |
| od_table->GfxclkFmax); |
| dev_dbg(smu->adev->dev, "OD: Uclk: (%d, %d)\n", od_table->UclkFmin, |
| od_table->UclkFmax); |
| |
| smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (!((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && |
| (smu_version < 0x003a2900))) |
| dev_dbg(smu->adev->dev, "OD: VddGfxOffset: %d\n", od_table->VddGfxOffset); |
| } |
| |
| static int sienna_cichlid_set_default_od_settings(struct smu_context *smu) |
| { |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)smu->smu_table.overdrive_table; |
| OverDriveTable_t *boot_od_table = |
| (OverDriveTable_t *)smu->smu_table.boot_overdrive_table; |
| OverDriveTable_t *user_od_table = |
| (OverDriveTable_t *)smu->smu_table.user_overdrive_table; |
| int ret = 0; |
| |
| /* |
| * For S3/S4/Runpm resume, no need to setup those overdrive tables again as |
| * - either they already have the default OD settings got during cold bootup |
| * - or they have some user customized OD settings which cannot be overwritten |
| */ |
| if (smu->adev->in_suspend) |
| return 0; |
| |
| ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE, |
| 0, (void *)boot_od_table, false); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get overdrive table!\n"); |
| return ret; |
| } |
| |
| sienna_cichlid_dump_od_table(smu, boot_od_table); |
| |
| memcpy(od_table, boot_od_table, sizeof(OverDriveTable_t)); |
| memcpy(user_od_table, boot_od_table, sizeof(OverDriveTable_t)); |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_od_setting_check_range(struct smu_context *smu, |
| struct smu_11_0_7_overdrive_table *od_table, |
| enum SMU_11_0_7_ODSETTING_ID setting, |
| uint32_t value) |
| { |
| if (value < od_table->min[setting]) { |
| dev_warn(smu->adev->dev, "OD setting (%d, %d) is less than the minimum allowed (%d)\n", |
| setting, value, od_table->min[setting]); |
| return -EINVAL; |
| } |
| if (value > od_table->max[setting]) { |
| dev_warn(smu->adev->dev, "OD setting (%d, %d) is greater than the maximum allowed (%d)\n", |
| setting, value, od_table->max[setting]); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu, |
| enum PP_OD_DPM_TABLE_COMMAND type, |
| long input[], uint32_t size) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)table_context->overdrive_table; |
| struct smu_11_0_7_overdrive_table *od_settings = |
| (struct smu_11_0_7_overdrive_table *)smu->od_settings; |
| struct amdgpu_device *adev = smu->adev; |
| enum SMU_11_0_7_ODSETTING_ID freq_setting; |
| uint16_t *freq_ptr; |
| int i, ret = 0; |
| uint32_t smu_version; |
| |
| if (!smu->od_enabled) { |
| dev_warn(smu->adev->dev, "OverDrive is not enabled!\n"); |
| return -EINVAL; |
| } |
| |
| if (!smu->od_settings) { |
| dev_err(smu->adev->dev, "OD board limits are not set!\n"); |
| return -ENOENT; |
| } |
| |
| if (!(table_context->overdrive_table && table_context->boot_overdrive_table)) { |
| dev_err(smu->adev->dev, "Overdrive table was not initialized!\n"); |
| return -EINVAL; |
| } |
| |
| switch (type) { |
| case PP_OD_EDIT_SCLK_VDDC_TABLE: |
| if (!sienna_cichlid_is_od_feature_supported(od_settings, |
| SMU_11_0_7_ODCAP_GFXCLK_LIMITS)) { |
| dev_warn(smu->adev->dev, "GFXCLK_LIMITS not supported!\n"); |
| return -ENOTSUPP; |
| } |
| |
| for (i = 0; i < size; i += 2) { |
| if (i + 2 > size) { |
| dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size); |
| return -EINVAL; |
| } |
| |
| switch (input[i]) { |
| case 0: |
| if (input[i + 1] > od_table->GfxclkFmax) { |
| dev_info(smu->adev->dev, "GfxclkFmin (%ld) must be <= GfxclkFmax (%u)!\n", |
| input[i + 1], od_table->GfxclkFmax); |
| return -EINVAL; |
| } |
| |
| freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMIN; |
| freq_ptr = &od_table->GfxclkFmin; |
| break; |
| |
| case 1: |
| if (input[i + 1] < od_table->GfxclkFmin) { |
| dev_info(smu->adev->dev, "GfxclkFmax (%ld) must be >= GfxclkFmin (%u)!\n", |
| input[i + 1], od_table->GfxclkFmin); |
| return -EINVAL; |
| } |
| |
| freq_setting = SMU_11_0_7_ODSETTING_GFXCLKFMAX; |
| freq_ptr = &od_table->GfxclkFmax; |
| break; |
| |
| default: |
| dev_info(smu->adev->dev, "Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]); |
| dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n"); |
| return -EINVAL; |
| } |
| |
| ret = sienna_cichlid_od_setting_check_range(smu, od_settings, |
| freq_setting, input[i + 1]); |
| if (ret) |
| return ret; |
| |
| *freq_ptr = (uint16_t)input[i + 1]; |
| } |
| break; |
| |
| case PP_OD_EDIT_MCLK_VDDC_TABLE: |
| if (!sienna_cichlid_is_od_feature_supported(od_settings, SMU_11_0_7_ODCAP_UCLK_LIMITS)) { |
| dev_warn(smu->adev->dev, "UCLK_LIMITS not supported!\n"); |
| return -ENOTSUPP; |
| } |
| |
| for (i = 0; i < size; i += 2) { |
| if (i + 2 > size) { |
| dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size); |
| return -EINVAL; |
| } |
| |
| switch (input[i]) { |
| case 0: |
| if (input[i + 1] > od_table->UclkFmax) { |
| dev_info(smu->adev->dev, "UclkFmin (%ld) must be <= UclkFmax (%u)!\n", |
| input[i + 1], od_table->UclkFmax); |
| return -EINVAL; |
| } |
| |
| freq_setting = SMU_11_0_7_ODSETTING_UCLKFMIN; |
| freq_ptr = &od_table->UclkFmin; |
| break; |
| |
| case 1: |
| if (input[i + 1] < od_table->UclkFmin) { |
| dev_info(smu->adev->dev, "UclkFmax (%ld) must be >= UclkFmin (%u)!\n", |
| input[i + 1], od_table->UclkFmin); |
| return -EINVAL; |
| } |
| |
| freq_setting = SMU_11_0_7_ODSETTING_UCLKFMAX; |
| freq_ptr = &od_table->UclkFmax; |
| break; |
| |
| default: |
| dev_info(smu->adev->dev, "Invalid MCLK_VDDC_TABLE index: %ld\n", input[i]); |
| dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n"); |
| return -EINVAL; |
| } |
| |
| ret = sienna_cichlid_od_setting_check_range(smu, od_settings, |
| freq_setting, input[i + 1]); |
| if (ret) |
| return ret; |
| |
| *freq_ptr = (uint16_t)input[i + 1]; |
| } |
| break; |
| |
| case PP_OD_RESTORE_DEFAULT_TABLE: |
| memcpy(table_context->overdrive_table, |
| table_context->boot_overdrive_table, |
| sizeof(OverDriveTable_t)); |
| fallthrough; |
| |
| case PP_OD_COMMIT_DPM_TABLE: |
| if (memcmp(od_table, table_context->user_overdrive_table, sizeof(OverDriveTable_t))) { |
| sienna_cichlid_dump_od_table(smu, od_table); |
| ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE, 0, (void *)od_table, true); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to import overdrive table!\n"); |
| return ret; |
| } |
| memcpy(table_context->user_overdrive_table, od_table, sizeof(OverDriveTable_t)); |
| smu->user_dpm_profile.user_od = true; |
| |
| if (!memcmp(table_context->user_overdrive_table, |
| table_context->boot_overdrive_table, |
| sizeof(OverDriveTable_t))) |
| smu->user_dpm_profile.user_od = false; |
| } |
| break; |
| |
| case PP_OD_EDIT_VDDGFX_OFFSET: |
| if (size != 1) { |
| dev_info(smu->adev->dev, "invalid number of parameters: %d\n", size); |
| return -EINVAL; |
| } |
| |
| /* |
| * OD GFX Voltage Offset functionality is supported only by 58.41.0 |
| * and onwards SMU firmwares. |
| */ |
| smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && |
| (smu_version < 0x003a2900)) { |
| dev_err(smu->adev->dev, "OD GFX Voltage offset functionality is supported " |
| "only by 58.41.0 and onwards SMU firmwares!\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| od_table->VddGfxOffset = (int16_t)input[0]; |
| |
| sienna_cichlid_dump_od_table(smu, od_table); |
| break; |
| |
| default: |
| return -ENOSYS; |
| } |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_run_btc(struct smu_context *smu) |
| { |
| int res; |
| |
| res = smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL); |
| if (res) |
| dev_err(smu->adev->dev, "RunDcBtc failed!\n"); |
| |
| return res; |
| } |
| |
| static int sienna_cichlid_baco_enter(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (adev->in_runpm && smu_cmn_is_audio_func_enabled(adev)) |
| return smu_v11_0_baco_set_armd3_sequence(smu, BACO_SEQ_BACO); |
| else |
| return smu_v11_0_baco_enter(smu); |
| } |
| |
| static int sienna_cichlid_baco_exit(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (adev->in_runpm && smu_cmn_is_audio_func_enabled(adev)) { |
| /* Wait for PMFW handling for the Dstate change */ |
| msleep(10); |
| return smu_v11_0_baco_set_armd3_sequence(smu, BACO_SEQ_ULPS); |
| } else { |
| return smu_v11_0_baco_exit(smu); |
| } |
| } |
| |
| static bool sienna_cichlid_is_mode1_reset_supported(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t val; |
| u32 smu_version; |
| |
| /** |
| * SRIOV env will not support SMU mode1 reset |
| * PM FW support mode1 reset from 58.26 |
| */ |
| smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (amdgpu_sriov_vf(adev) || (smu_version < 0x003a1a00)) |
| return false; |
| |
| /** |
| * mode1 reset relies on PSP, so we should check if |
| * PSP is alive. |
| */ |
| val = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81); |
| return val != 0x0; |
| } |
| |
| static void beige_goby_dump_pptable(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_beige_goby_t *pptable = table_context->driver_pptable; |
| int i; |
| |
| dev_info(smu->adev->dev, "Dumped PPTable:\n"); |
| |
| dev_info(smu->adev->dev, "Version = 0x%08x\n", pptable->Version); |
| dev_info(smu->adev->dev, "FeaturesToRun[0] = 0x%08x\n", pptable->FeaturesToRun[0]); |
| dev_info(smu->adev->dev, "FeaturesToRun[1] = 0x%08x\n", pptable->FeaturesToRun[1]); |
| |
| for (i = 0; i < PPT_THROTTLER_COUNT; i++) { |
| dev_info(smu->adev->dev, "SocketPowerLimitAc[%d] = 0x%x\n", i, pptable->SocketPowerLimitAc[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitAcTau[%d] = 0x%x\n", i, pptable->SocketPowerLimitAcTau[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitDc[%d] = 0x%x\n", i, pptable->SocketPowerLimitDc[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitDcTau[%d] = 0x%x\n", i, pptable->SocketPowerLimitDcTau[i]); |
| } |
| |
| for (i = 0; i < TDC_THROTTLER_COUNT; i++) { |
| dev_info(smu->adev->dev, "TdcLimit[%d] = 0x%x\n", i, pptable->TdcLimit[i]); |
| dev_info(smu->adev->dev, "TdcLimitTau[%d] = 0x%x\n", i, pptable->TdcLimitTau[i]); |
| } |
| |
| for (i = 0; i < TEMP_COUNT; i++) { |
| dev_info(smu->adev->dev, "TemperatureLimit[%d] = 0x%x\n", i, pptable->TemperatureLimit[i]); |
| } |
| |
| dev_info(smu->adev->dev, "FitLimit = 0x%x\n", pptable->FitLimit); |
| dev_info(smu->adev->dev, "TotalPowerConfig = 0x%x\n", pptable->TotalPowerConfig); |
| dev_info(smu->adev->dev, "TotalPowerPadding[0] = 0x%x\n", pptable->TotalPowerPadding[0]); |
| dev_info(smu->adev->dev, "TotalPowerPadding[1] = 0x%x\n", pptable->TotalPowerPadding[1]); |
| dev_info(smu->adev->dev, "TotalPowerPadding[2] = 0x%x\n", pptable->TotalPowerPadding[2]); |
| |
| dev_info(smu->adev->dev, "ApccPlusResidencyLimit = 0x%x\n", pptable->ApccPlusResidencyLimit); |
| for (i = 0; i < NUM_SMNCLK_DPM_LEVELS; i++) { |
| dev_info(smu->adev->dev, "SmnclkDpmFreq[%d] = 0x%x\n", i, pptable->SmnclkDpmFreq[i]); |
| dev_info(smu->adev->dev, "SmnclkDpmVoltage[%d] = 0x%x\n", i, pptable->SmnclkDpmVoltage[i]); |
| } |
| dev_info(smu->adev->dev, "ThrottlerControlMask = 0x%x\n", pptable->ThrottlerControlMask); |
| |
| dev_info(smu->adev->dev, "FwDStateMask = 0x%x\n", pptable->FwDStateMask); |
| |
| dev_info(smu->adev->dev, "UlvVoltageOffsetSoc = 0x%x\n", pptable->UlvVoltageOffsetSoc); |
| dev_info(smu->adev->dev, "UlvVoltageOffsetGfx = 0x%x\n", pptable->UlvVoltageOffsetGfx); |
| dev_info(smu->adev->dev, "MinVoltageUlvGfx = 0x%x\n", pptable->MinVoltageUlvGfx); |
| dev_info(smu->adev->dev, "MinVoltageUlvSoc = 0x%x\n", pptable->MinVoltageUlvSoc); |
| |
| dev_info(smu->adev->dev, "SocLIVmin = 0x%x\n", pptable->SocLIVmin); |
| |
| dev_info(smu->adev->dev, "GceaLinkMgrIdleThreshold = 0x%x\n", pptable->GceaLinkMgrIdleThreshold); |
| |
| dev_info(smu->adev->dev, "MinVoltageGfx = 0x%x\n", pptable->MinVoltageGfx); |
| dev_info(smu->adev->dev, "MinVoltageSoc = 0x%x\n", pptable->MinVoltageSoc); |
| dev_info(smu->adev->dev, "MaxVoltageGfx = 0x%x\n", pptable->MaxVoltageGfx); |
| dev_info(smu->adev->dev, "MaxVoltageSoc = 0x%x\n", pptable->MaxVoltageSoc); |
| |
| dev_info(smu->adev->dev, "LoadLineResistanceGfx = 0x%x\n", pptable->LoadLineResistanceGfx); |
| dev_info(smu->adev->dev, "LoadLineResistanceSoc = 0x%x\n", pptable->LoadLineResistanceSoc); |
| |
| dev_info(smu->adev->dev, "VDDGFX_TVmin = 0x%x\n", pptable->VDDGFX_TVmin); |
| dev_info(smu->adev->dev, "VDDSOC_TVmin = 0x%x\n", pptable->VDDSOC_TVmin); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_HiTemp = 0x%x\n", pptable->VDDGFX_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_LoTemp = 0x%x\n", pptable->VDDGFX_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_HiTemp = 0x%x\n", pptable->VDDSOC_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_LoTemp = 0x%x\n", pptable->VDDSOC_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDGFX_TVminHystersis = 0x%x\n", pptable->VDDGFX_TVminHystersis); |
| dev_info(smu->adev->dev, "VDDSOC_TVminHystersis = 0x%x\n", pptable->VDDSOC_TVminHystersis); |
| |
| dev_info(smu->adev->dev, "[PPCLK_GFXCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_GFXCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_SOCCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_SOCCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_UCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_UCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_UCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_UCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_UCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_UCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_FCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_FCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_FCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_FCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_FCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_FCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_DCLK_0]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_DCLK_0].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].Padding, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsFmin, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_VCLK_0]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_VCLK_0].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].Padding, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsFmin, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_DCLK_1]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_DCLK_1].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].Padding, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsFmin, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_VCLK_1]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_VCLK_1].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].Padding, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsFmin, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].Padding16); |
| |
| dev_info(smu->adev->dev, "FreqTableGfx\n"); |
| for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableGfx[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableVclk\n"); |
| for (i = 0; i < NUM_VCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableVclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableDclk\n"); |
| for (i = 0; i < NUM_DCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableDclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableSocclk\n"); |
| for (i = 0; i < NUM_SOCCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableSocclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableUclk\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableUclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableFclk\n"); |
| for (i = 0; i < NUM_FCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableFclk[i]); |
| |
| dev_info(smu->adev->dev, "DcModeMaxFreq\n"); |
| dev_info(smu->adev->dev, " .PPCLK_GFXCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_GFXCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_SOCCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_SOCCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_UCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_UCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_FCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_FCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_DCLK_0 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_DCLK_0]); |
| dev_info(smu->adev->dev, " .PPCLK_VCLK_0 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_VCLK_0]); |
| dev_info(smu->adev->dev, " .PPCLK_DCLK_1 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_DCLK_1]); |
| dev_info(smu->adev->dev, " .PPCLK_VCLK_1 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_VCLK_1]); |
| |
| dev_info(smu->adev->dev, "FreqTableUclkDiv\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FreqTableUclkDiv[i]); |
| |
| dev_info(smu->adev->dev, "FclkBoostFreq = 0x%x\n", pptable->FclkBoostFreq); |
| dev_info(smu->adev->dev, "FclkParamPadding = 0x%x\n", pptable->FclkParamPadding); |
| |
| dev_info(smu->adev->dev, "Mp0clkFreq\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->Mp0clkFreq[i]); |
| |
| dev_info(smu->adev->dev, "Mp0DpmVoltage\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->Mp0DpmVoltage[i]); |
| |
| dev_info(smu->adev->dev, "MemVddciVoltage\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->MemVddciVoltage[i]); |
| |
| dev_info(smu->adev->dev, "MemMvddVoltage\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->MemMvddVoltage[i]); |
| |
| dev_info(smu->adev->dev, "GfxclkFgfxoffEntry = 0x%x\n", pptable->GfxclkFgfxoffEntry); |
| dev_info(smu->adev->dev, "GfxclkFinit = 0x%x\n", pptable->GfxclkFinit); |
| dev_info(smu->adev->dev, "GfxclkFidle = 0x%x\n", pptable->GfxclkFidle); |
| dev_info(smu->adev->dev, "GfxclkSource = 0x%x\n", pptable->GfxclkSource); |
| dev_info(smu->adev->dev, "GfxclkPadding = 0x%x\n", pptable->GfxclkPadding); |
| |
| dev_info(smu->adev->dev, "GfxGpoSubFeatureMask = 0x%x\n", pptable->GfxGpoSubFeatureMask); |
| |
| dev_info(smu->adev->dev, "GfxGpoEnabledWorkPolicyMask = 0x%x\n", pptable->GfxGpoEnabledWorkPolicyMask); |
| dev_info(smu->adev->dev, "GfxGpoDisabledWorkPolicyMask = 0x%x\n", pptable->GfxGpoDisabledWorkPolicyMask); |
| dev_info(smu->adev->dev, "GfxGpoPadding[0] = 0x%x\n", pptable->GfxGpoPadding[0]); |
| dev_info(smu->adev->dev, "GfxGpoVotingAllow = 0x%x\n", pptable->GfxGpoVotingAllow); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[0] = 0x%x\n", pptable->GfxGpoPadding32[0]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[1] = 0x%x\n", pptable->GfxGpoPadding32[1]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[2] = 0x%x\n", pptable->GfxGpoPadding32[2]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[3] = 0x%x\n", pptable->GfxGpoPadding32[3]); |
| dev_info(smu->adev->dev, "GfxDcsFopt = 0x%x\n", pptable->GfxDcsFopt); |
| dev_info(smu->adev->dev, "GfxDcsFclkFopt = 0x%x\n", pptable->GfxDcsFclkFopt); |
| dev_info(smu->adev->dev, "GfxDcsUclkFopt = 0x%x\n", pptable->GfxDcsUclkFopt); |
| |
| dev_info(smu->adev->dev, "DcsGfxOffVoltage = 0x%x\n", pptable->DcsGfxOffVoltage); |
| dev_info(smu->adev->dev, "DcsMinGfxOffTime = 0x%x\n", pptable->DcsMinGfxOffTime); |
| dev_info(smu->adev->dev, "DcsMaxGfxOffTime = 0x%x\n", pptable->DcsMaxGfxOffTime); |
| dev_info(smu->adev->dev, "DcsMinCreditAccum = 0x%x\n", pptable->DcsMinCreditAccum); |
| dev_info(smu->adev->dev, "DcsExitHysteresis = 0x%x\n", pptable->DcsExitHysteresis); |
| dev_info(smu->adev->dev, "DcsTimeout = 0x%x\n", pptable->DcsTimeout); |
| |
| dev_info(smu->adev->dev, "DcsParamPadding[0] = 0x%x\n", pptable->DcsParamPadding[0]); |
| dev_info(smu->adev->dev, "DcsParamPadding[1] = 0x%x\n", pptable->DcsParamPadding[1]); |
| dev_info(smu->adev->dev, "DcsParamPadding[2] = 0x%x\n", pptable->DcsParamPadding[2]); |
| dev_info(smu->adev->dev, "DcsParamPadding[3] = 0x%x\n", pptable->DcsParamPadding[3]); |
| dev_info(smu->adev->dev, "DcsParamPadding[4] = 0x%x\n", pptable->DcsParamPadding[4]); |
| |
| dev_info(smu->adev->dev, "FlopsPerByteTable\n"); |
| for (i = 0; i < RLC_PACE_TABLE_NUM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FlopsPerByteTable[i]); |
| |
| dev_info(smu->adev->dev, "LowestUclkReservedForUlv = 0x%x\n", pptable->LowestUclkReservedForUlv); |
| dev_info(smu->adev->dev, "vddingMem[0] = 0x%x\n", pptable->PaddingMem[0]); |
| dev_info(smu->adev->dev, "vddingMem[1] = 0x%x\n", pptable->PaddingMem[1]); |
| dev_info(smu->adev->dev, "vddingMem[2] = 0x%x\n", pptable->PaddingMem[2]); |
| |
| dev_info(smu->adev->dev, "UclkDpmPstates\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->UclkDpmPstates[i]); |
| |
| dev_info(smu->adev->dev, "UclkDpmSrcFreqRange\n"); |
| dev_info(smu->adev->dev, " .Fmin = 0x%x\n", |
| pptable->UclkDpmSrcFreqRange.Fmin); |
| dev_info(smu->adev->dev, " .Fmax = 0x%x\n", |
| pptable->UclkDpmSrcFreqRange.Fmax); |
| dev_info(smu->adev->dev, "UclkDpmTargFreqRange\n"); |
| dev_info(smu->adev->dev, " .Fmin = 0x%x\n", |
| pptable->UclkDpmTargFreqRange.Fmin); |
| dev_info(smu->adev->dev, " .Fmax = 0x%x\n", |
| pptable->UclkDpmTargFreqRange.Fmax); |
| dev_info(smu->adev->dev, "UclkDpmMidstepFreq = 0x%x\n", pptable->UclkDpmMidstepFreq); |
| dev_info(smu->adev->dev, "UclkMidstepPadding = 0x%x\n", pptable->UclkMidstepPadding); |
| |
| dev_info(smu->adev->dev, "PcieGenSpeed\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->PcieGenSpeed[i]); |
| |
| dev_info(smu->adev->dev, "PcieLaneCount\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->PcieLaneCount[i]); |
| |
| dev_info(smu->adev->dev, "LclkFreq\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->LclkFreq[i]); |
| |
| dev_info(smu->adev->dev, "FanStopTemp = 0x%x\n", pptable->FanStopTemp); |
| dev_info(smu->adev->dev, "FanStartTemp = 0x%x\n", pptable->FanStartTemp); |
| |
| dev_info(smu->adev->dev, "FanGain\n"); |
| for (i = 0; i < TEMP_COUNT; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FanGain[i]); |
| |
| dev_info(smu->adev->dev, "FanPwmMin = 0x%x\n", pptable->FanPwmMin); |
| dev_info(smu->adev->dev, "FanAcousticLimitRpm = 0x%x\n", pptable->FanAcousticLimitRpm); |
| dev_info(smu->adev->dev, "FanThrottlingRpm = 0x%x\n", pptable->FanThrottlingRpm); |
| dev_info(smu->adev->dev, "FanMaximumRpm = 0x%x\n", pptable->FanMaximumRpm); |
| dev_info(smu->adev->dev, "MGpuFanBoostLimitRpm = 0x%x\n", pptable->MGpuFanBoostLimitRpm); |
| dev_info(smu->adev->dev, "FanTargetTemperature = 0x%x\n", pptable->FanTargetTemperature); |
| dev_info(smu->adev->dev, "FanTargetGfxclk = 0x%x\n", pptable->FanTargetGfxclk); |
| dev_info(smu->adev->dev, "FanPadding16 = 0x%x\n", pptable->FanPadding16); |
| dev_info(smu->adev->dev, "FanTempInputSelect = 0x%x\n", pptable->FanTempInputSelect); |
| dev_info(smu->adev->dev, "FanPadding = 0x%x\n", pptable->FanPadding); |
| dev_info(smu->adev->dev, "FanZeroRpmEnable = 0x%x\n", pptable->FanZeroRpmEnable); |
| dev_info(smu->adev->dev, "FanTachEdgePerRev = 0x%x\n", pptable->FanTachEdgePerRev); |
| |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorSetDelta = 0x%x\n", pptable->FuzzyFan_ErrorSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorRateSetDelta = 0x%x\n", pptable->FuzzyFan_ErrorRateSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_PwmSetDelta = 0x%x\n", pptable->FuzzyFan_PwmSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_Reserved = 0x%x\n", pptable->FuzzyFan_Reserved); |
| |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "dBtcGbGfxDfllModelSelect = 0x%x\n", pptable->dBtcGbGfxDfllModelSelect); |
| dev_info(smu->adev->dev, "Padding8_Avfs = 0x%x\n", pptable->Padding8_Avfs); |
| |
| dev_info(smu->adev->dev, "qAvfsGb[AVFS_VOLTAGE_GFX]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].a, |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].b, |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].c); |
| dev_info(smu->adev->dev, "qAvfsGb[AVFS_VOLTAGE_SOC]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].a, |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].b, |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].c); |
| dev_info(smu->adev->dev, "dBtcGbGfxPll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxPll.a, |
| pptable->dBtcGbGfxPll.b, |
| pptable->dBtcGbGfxPll.c); |
| dev_info(smu->adev->dev, "dBtcGbGfxAfll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxDfll.a, |
| pptable->dBtcGbGfxDfll.b, |
| pptable->dBtcGbGfxDfll.c); |
| dev_info(smu->adev->dev, "dBtcGbSoc{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbSoc.a, |
| pptable->dBtcGbSoc.b, |
| pptable->dBtcGbSoc.c); |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_GFX]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].b); |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_SOC]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].b); |
| |
| dev_info(smu->adev->dev, "PiecewiseLinearDroopIntGfxDfll\n"); |
| for (i = 0; i < NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS; i++) { |
| dev_info(smu->adev->dev, " Fset[%d] = 0x%x\n", |
| i, pptable->PiecewiseLinearDroopIntGfxDfll.Fset[i]); |
| dev_info(smu->adev->dev, " Vdroop[%d] = 0x%x\n", |
| i, pptable->PiecewiseLinearDroopIntGfxDfll.Vdroop[i]); |
| } |
| |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_GFX]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].c); |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_SOC]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].c); |
| |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[0] = 0x%x\n", pptable->Padding8_GfxBtc[0]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[1] = 0x%x\n", pptable->Padding8_GfxBtc[1]); |
| |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "XgmiDpmPstates\n"); |
| for (i = 0; i < NUM_XGMI_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiDpmPstates[i]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[0] = 0x%02x\n", pptable->XgmiDpmSpare[0]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[1] = 0x%02x\n", pptable->XgmiDpmSpare[1]); |
| |
| dev_info(smu->adev->dev, "DebugOverrides = 0x%x\n", pptable->DebugOverrides); |
| dev_info(smu->adev->dev, "ReservedEquation0{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation0.a, |
| pptable->ReservedEquation0.b, |
| pptable->ReservedEquation0.c); |
| dev_info(smu->adev->dev, "ReservedEquation1{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation1.a, |
| pptable->ReservedEquation1.b, |
| pptable->ReservedEquation1.c); |
| dev_info(smu->adev->dev, "ReservedEquation2{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation2.a, |
| pptable->ReservedEquation2.b, |
| pptable->ReservedEquation2.c); |
| dev_info(smu->adev->dev, "ReservedEquation3{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation3.a, |
| pptable->ReservedEquation3.b, |
| pptable->ReservedEquation3.c); |
| |
| dev_info(smu->adev->dev, "SkuReserved[0] = 0x%x\n", pptable->SkuReserved[0]); |
| dev_info(smu->adev->dev, "SkuReserved[1] = 0x%x\n", pptable->SkuReserved[1]); |
| dev_info(smu->adev->dev, "SkuReserved[2] = 0x%x\n", pptable->SkuReserved[2]); |
| dev_info(smu->adev->dev, "SkuReserved[3] = 0x%x\n", pptable->SkuReserved[3]); |
| dev_info(smu->adev->dev, "SkuReserved[4] = 0x%x\n", pptable->SkuReserved[4]); |
| dev_info(smu->adev->dev, "SkuReserved[5] = 0x%x\n", pptable->SkuReserved[5]); |
| dev_info(smu->adev->dev, "SkuReserved[6] = 0x%x\n", pptable->SkuReserved[6]); |
| dev_info(smu->adev->dev, "SkuReserved[7] = 0x%x\n", pptable->SkuReserved[7]); |
| |
| dev_info(smu->adev->dev, "GamingClk[0] = 0x%x\n", pptable->GamingClk[0]); |
| dev_info(smu->adev->dev, "GamingClk[1] = 0x%x\n", pptable->GamingClk[1]); |
| dev_info(smu->adev->dev, "GamingClk[2] = 0x%x\n", pptable->GamingClk[2]); |
| dev_info(smu->adev->dev, "GamingClk[3] = 0x%x\n", pptable->GamingClk[3]); |
| dev_info(smu->adev->dev, "GamingClk[4] = 0x%x\n", pptable->GamingClk[4]); |
| dev_info(smu->adev->dev, "GamingClk[5] = 0x%x\n", pptable->GamingClk[5]); |
| |
| for (i = 0; i < NUM_I2C_CONTROLLERS; i++) { |
| dev_info(smu->adev->dev, "I2cControllers[%d]:\n", i); |
| dev_info(smu->adev->dev, " .Enabled = 0x%x\n", |
| pptable->I2cControllers[i].Enabled); |
| dev_info(smu->adev->dev, " .Speed = 0x%x\n", |
| pptable->I2cControllers[i].Speed); |
| dev_info(smu->adev->dev, " .SlaveAddress = 0x%x\n", |
| pptable->I2cControllers[i].SlaveAddress); |
| dev_info(smu->adev->dev, " .ControllerPort = 0x%x\n", |
| pptable->I2cControllers[i].ControllerPort); |
| dev_info(smu->adev->dev, " .ControllerName = 0x%x\n", |
| pptable->I2cControllers[i].ControllerName); |
| dev_info(smu->adev->dev, " .ThermalThrottler = 0x%x\n", |
| pptable->I2cControllers[i].ThermalThrotter); |
| dev_info(smu->adev->dev, " .I2cProtocol = 0x%x\n", |
| pptable->I2cControllers[i].I2cProtocol); |
| dev_info(smu->adev->dev, " .PaddingConfig = 0x%x\n", |
| pptable->I2cControllers[i].PaddingConfig); |
| } |
| |
| dev_info(smu->adev->dev, "GpioScl = 0x%x\n", pptable->GpioScl); |
| dev_info(smu->adev->dev, "GpioSda = 0x%x\n", pptable->GpioSda); |
| dev_info(smu->adev->dev, "FchUsbPdSlaveAddr = 0x%x\n", pptable->FchUsbPdSlaveAddr); |
| dev_info(smu->adev->dev, "I2cSpare[0] = 0x%x\n", pptable->I2cSpare[0]); |
| |
| dev_info(smu->adev->dev, "Board Parameters:\n"); |
| dev_info(smu->adev->dev, "VddGfxVrMapping = 0x%x\n", pptable->VddGfxVrMapping); |
| dev_info(smu->adev->dev, "VddSocVrMapping = 0x%x\n", pptable->VddSocVrMapping); |
| dev_info(smu->adev->dev, "VddMem0VrMapping = 0x%x\n", pptable->VddMem0VrMapping); |
| dev_info(smu->adev->dev, "VddMem1VrMapping = 0x%x\n", pptable->VddMem1VrMapping); |
| dev_info(smu->adev->dev, "GfxUlvPhaseSheddingMask = 0x%x\n", pptable->GfxUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "SocUlvPhaseSheddingMask = 0x%x\n", pptable->SocUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "VddciUlvPhaseSheddingMask = 0x%x\n", pptable->VddciUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "MvddUlvPhaseSheddingMask = 0x%x\n", pptable->MvddUlvPhaseSheddingMask); |
| |
| dev_info(smu->adev->dev, "GfxMaxCurrent = 0x%x\n", pptable->GfxMaxCurrent); |
| dev_info(smu->adev->dev, "GfxOffset = 0x%x\n", pptable->GfxOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetryGfx = 0x%x\n", pptable->Padding_TelemetryGfx); |
| |
| dev_info(smu->adev->dev, "SocMaxCurrent = 0x%x\n", pptable->SocMaxCurrent); |
| dev_info(smu->adev->dev, "SocOffset = 0x%x\n", pptable->SocOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetrySoc = 0x%x\n", pptable->Padding_TelemetrySoc); |
| |
| dev_info(smu->adev->dev, "Mem0MaxCurrent = 0x%x\n", pptable->Mem0MaxCurrent); |
| dev_info(smu->adev->dev, "Mem0Offset = 0x%x\n", pptable->Mem0Offset); |
| dev_info(smu->adev->dev, "Padding_TelemetryMem0 = 0x%x\n", pptable->Padding_TelemetryMem0); |
| |
| dev_info(smu->adev->dev, "Mem1MaxCurrent = 0x%x\n", pptable->Mem1MaxCurrent); |
| dev_info(smu->adev->dev, "Mem1Offset = 0x%x\n", pptable->Mem1Offset); |
| dev_info(smu->adev->dev, "Padding_TelemetryMem1 = 0x%x\n", pptable->Padding_TelemetryMem1); |
| |
| dev_info(smu->adev->dev, "MvddRatio = 0x%x\n", pptable->MvddRatio); |
| |
| dev_info(smu->adev->dev, "AcDcGpio = 0x%x\n", pptable->AcDcGpio); |
| dev_info(smu->adev->dev, "AcDcPolarity = 0x%x\n", pptable->AcDcPolarity); |
| dev_info(smu->adev->dev, "VR0HotGpio = 0x%x\n", pptable->VR0HotGpio); |
| dev_info(smu->adev->dev, "VR0HotPolarity = 0x%x\n", pptable->VR0HotPolarity); |
| dev_info(smu->adev->dev, "VR1HotGpio = 0x%x\n", pptable->VR1HotGpio); |
| dev_info(smu->adev->dev, "VR1HotPolarity = 0x%x\n", pptable->VR1HotPolarity); |
| dev_info(smu->adev->dev, "GthrGpio = 0x%x\n", pptable->GthrGpio); |
| dev_info(smu->adev->dev, "GthrPolarity = 0x%x\n", pptable->GthrPolarity); |
| dev_info(smu->adev->dev, "LedPin0 = 0x%x\n", pptable->LedPin0); |
| dev_info(smu->adev->dev, "LedPin1 = 0x%x\n", pptable->LedPin1); |
| dev_info(smu->adev->dev, "LedPin2 = 0x%x\n", pptable->LedPin2); |
| dev_info(smu->adev->dev, "LedEnableMask = 0x%x\n", pptable->LedEnableMask); |
| dev_info(smu->adev->dev, "LedPcie = 0x%x\n", pptable->LedPcie); |
| dev_info(smu->adev->dev, "LedError = 0x%x\n", pptable->LedError); |
| dev_info(smu->adev->dev, "LedSpare1[0] = 0x%x\n", pptable->LedSpare1[0]); |
| dev_info(smu->adev->dev, "LedSpare1[1] = 0x%x\n", pptable->LedSpare1[1]); |
| |
| dev_info(smu->adev->dev, "PllGfxclkSpreadEnabled = 0x%x\n", pptable->PllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadPercent = 0x%x\n", pptable->PllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadFreq = 0x%x\n", pptable->PllGfxclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadEnabled = 0x%x\n", pptable->DfllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadPercent = 0x%x\n", pptable->DfllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadFreq = 0x%x\n", pptable->DfllGfxclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "UclkSpreadPadding = 0x%x\n", pptable->UclkSpreadPadding); |
| dev_info(smu->adev->dev, "UclkSpreadFreq = 0x%x\n", pptable->UclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "FclkSpreadEnabled = 0x%x\n", pptable->FclkSpreadEnabled); |
| dev_info(smu->adev->dev, "FclkSpreadPercent = 0x%x\n", pptable->FclkSpreadPercent); |
| dev_info(smu->adev->dev, "FclkSpreadFreq = 0x%x\n", pptable->FclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "MemoryChannelEnabled = 0x%x\n", pptable->MemoryChannelEnabled); |
| dev_info(smu->adev->dev, "DramBitWidth = 0x%x\n", pptable->DramBitWidth); |
| dev_info(smu->adev->dev, "PaddingMem1[0] = 0x%x\n", pptable->PaddingMem1[0]); |
| dev_info(smu->adev->dev, "PaddingMem1[1] = 0x%x\n", pptable->PaddingMem1[1]); |
| dev_info(smu->adev->dev, "PaddingMem1[2] = 0x%x\n", pptable->PaddingMem1[2]); |
| |
| dev_info(smu->adev->dev, "TotalBoardPower = 0x%x\n", pptable->TotalBoardPower); |
| dev_info(smu->adev->dev, "BoardPowerPadding = 0x%x\n", pptable->BoardPowerPadding); |
| |
| dev_info(smu->adev->dev, "XgmiLinkSpeed\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiLinkSpeed[i]); |
| dev_info(smu->adev->dev, "XgmiLinkWidth\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiLinkWidth[i]); |
| dev_info(smu->adev->dev, "XgmiFclkFreq\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiFclkFreq[i]); |
| dev_info(smu->adev->dev, "XgmiSocVoltage\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiSocVoltage[i]); |
| |
| dev_info(smu->adev->dev, "HsrEnabled = 0x%x\n", pptable->HsrEnabled); |
| dev_info(smu->adev->dev, "VddqOffEnabled = 0x%x\n", pptable->VddqOffEnabled); |
| dev_info(smu->adev->dev, "PaddingUmcFlags[0] = 0x%x\n", pptable->PaddingUmcFlags[0]); |
| dev_info(smu->adev->dev, "PaddingUmcFlags[1] = 0x%x\n", pptable->PaddingUmcFlags[1]); |
| |
| dev_info(smu->adev->dev, "BoardReserved[0] = 0x%x\n", pptable->BoardReserved[0]); |
| dev_info(smu->adev->dev, "BoardReserved[1] = 0x%x\n", pptable->BoardReserved[1]); |
| dev_info(smu->adev->dev, "BoardReserved[2] = 0x%x\n", pptable->BoardReserved[2]); |
| dev_info(smu->adev->dev, "BoardReserved[3] = 0x%x\n", pptable->BoardReserved[3]); |
| dev_info(smu->adev->dev, "BoardReserved[4] = 0x%x\n", pptable->BoardReserved[4]); |
| dev_info(smu->adev->dev, "BoardReserved[5] = 0x%x\n", pptable->BoardReserved[5]); |
| dev_info(smu->adev->dev, "BoardReserved[6] = 0x%x\n", pptable->BoardReserved[6]); |
| dev_info(smu->adev->dev, "BoardReserved[7] = 0x%x\n", pptable->BoardReserved[7]); |
| dev_info(smu->adev->dev, "BoardReserved[8] = 0x%x\n", pptable->BoardReserved[8]); |
| dev_info(smu->adev->dev, "BoardReserved[9] = 0x%x\n", pptable->BoardReserved[9]); |
| dev_info(smu->adev->dev, "BoardReserved[10] = 0x%x\n", pptable->BoardReserved[10]); |
| |
| dev_info(smu->adev->dev, "MmHubPadding[0] = 0x%x\n", pptable->MmHubPadding[0]); |
| dev_info(smu->adev->dev, "MmHubPadding[1] = 0x%x\n", pptable->MmHubPadding[1]); |
| dev_info(smu->adev->dev, "MmHubPadding[2] = 0x%x\n", pptable->MmHubPadding[2]); |
| dev_info(smu->adev->dev, "MmHubPadding[3] = 0x%x\n", pptable->MmHubPadding[3]); |
| dev_info(smu->adev->dev, "MmHubPadding[4] = 0x%x\n", pptable->MmHubPadding[4]); |
| dev_info(smu->adev->dev, "MmHubPadding[5] = 0x%x\n", pptable->MmHubPadding[5]); |
| dev_info(smu->adev->dev, "MmHubPadding[6] = 0x%x\n", pptable->MmHubPadding[6]); |
| dev_info(smu->adev->dev, "MmHubPadding[7] = 0x%x\n", pptable->MmHubPadding[7]); |
| } |
| |
| static void sienna_cichlid_dump_pptable(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| int i; |
| |
| if (smu->adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 13)) { |
| beige_goby_dump_pptable(smu); |
| return; |
| } |
| |
| dev_info(smu->adev->dev, "Dumped PPTable:\n"); |
| |
| dev_info(smu->adev->dev, "Version = 0x%08x\n", pptable->Version); |
| dev_info(smu->adev->dev, "FeaturesToRun[0] = 0x%08x\n", pptable->FeaturesToRun[0]); |
| dev_info(smu->adev->dev, "FeaturesToRun[1] = 0x%08x\n", pptable->FeaturesToRun[1]); |
| |
| for (i = 0; i < PPT_THROTTLER_COUNT; i++) { |
| dev_info(smu->adev->dev, "SocketPowerLimitAc[%d] = 0x%x\n", i, pptable->SocketPowerLimitAc[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitAcTau[%d] = 0x%x\n", i, pptable->SocketPowerLimitAcTau[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitDc[%d] = 0x%x\n", i, pptable->SocketPowerLimitDc[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitDcTau[%d] = 0x%x\n", i, pptable->SocketPowerLimitDcTau[i]); |
| } |
| |
| for (i = 0; i < TDC_THROTTLER_COUNT; i++) { |
| dev_info(smu->adev->dev, "TdcLimit[%d] = 0x%x\n", i, pptable->TdcLimit[i]); |
| dev_info(smu->adev->dev, "TdcLimitTau[%d] = 0x%x\n", i, pptable->TdcLimitTau[i]); |
| } |
| |
| for (i = 0; i < TEMP_COUNT; i++) { |
| dev_info(smu->adev->dev, "TemperatureLimit[%d] = 0x%x\n", i, pptable->TemperatureLimit[i]); |
| } |
| |
| dev_info(smu->adev->dev, "FitLimit = 0x%x\n", pptable->FitLimit); |
| dev_info(smu->adev->dev, "TotalPowerConfig = 0x%x\n", pptable->TotalPowerConfig); |
| dev_info(smu->adev->dev, "TotalPowerPadding[0] = 0x%x\n", pptable->TotalPowerPadding[0]); |
| dev_info(smu->adev->dev, "TotalPowerPadding[1] = 0x%x\n", pptable->TotalPowerPadding[1]); |
| dev_info(smu->adev->dev, "TotalPowerPadding[2] = 0x%x\n", pptable->TotalPowerPadding[2]); |
| |
| dev_info(smu->adev->dev, "ApccPlusResidencyLimit = 0x%x\n", pptable->ApccPlusResidencyLimit); |
| for (i = 0; i < NUM_SMNCLK_DPM_LEVELS; i++) { |
| dev_info(smu->adev->dev, "SmnclkDpmFreq[%d] = 0x%x\n", i, pptable->SmnclkDpmFreq[i]); |
| dev_info(smu->adev->dev, "SmnclkDpmVoltage[%d] = 0x%x\n", i, pptable->SmnclkDpmVoltage[i]); |
| } |
| dev_info(smu->adev->dev, "ThrottlerControlMask = 0x%x\n", pptable->ThrottlerControlMask); |
| |
| dev_info(smu->adev->dev, "FwDStateMask = 0x%x\n", pptable->FwDStateMask); |
| |
| dev_info(smu->adev->dev, "UlvVoltageOffsetSoc = 0x%x\n", pptable->UlvVoltageOffsetSoc); |
| dev_info(smu->adev->dev, "UlvVoltageOffsetGfx = 0x%x\n", pptable->UlvVoltageOffsetGfx); |
| dev_info(smu->adev->dev, "MinVoltageUlvGfx = 0x%x\n", pptable->MinVoltageUlvGfx); |
| dev_info(smu->adev->dev, "MinVoltageUlvSoc = 0x%x\n", pptable->MinVoltageUlvSoc); |
| |
| dev_info(smu->adev->dev, "SocLIVmin = 0x%x\n", pptable->SocLIVmin); |
| dev_info(smu->adev->dev, "PaddingLIVmin = 0x%x\n", pptable->PaddingLIVmin); |
| |
| dev_info(smu->adev->dev, "GceaLinkMgrIdleThreshold = 0x%x\n", pptable->GceaLinkMgrIdleThreshold); |
| dev_info(smu->adev->dev, "paddingRlcUlvParams[0] = 0x%x\n", pptable->paddingRlcUlvParams[0]); |
| dev_info(smu->adev->dev, "paddingRlcUlvParams[1] = 0x%x\n", pptable->paddingRlcUlvParams[1]); |
| dev_info(smu->adev->dev, "paddingRlcUlvParams[2] = 0x%x\n", pptable->paddingRlcUlvParams[2]); |
| |
| dev_info(smu->adev->dev, "MinVoltageGfx = 0x%x\n", pptable->MinVoltageGfx); |
| dev_info(smu->adev->dev, "MinVoltageSoc = 0x%x\n", pptable->MinVoltageSoc); |
| dev_info(smu->adev->dev, "MaxVoltageGfx = 0x%x\n", pptable->MaxVoltageGfx); |
| dev_info(smu->adev->dev, "MaxVoltageSoc = 0x%x\n", pptable->MaxVoltageSoc); |
| |
| dev_info(smu->adev->dev, "LoadLineResistanceGfx = 0x%x\n", pptable->LoadLineResistanceGfx); |
| dev_info(smu->adev->dev, "LoadLineResistanceSoc = 0x%x\n", pptable->LoadLineResistanceSoc); |
| |
| dev_info(smu->adev->dev, "VDDGFX_TVmin = 0x%x\n", pptable->VDDGFX_TVmin); |
| dev_info(smu->adev->dev, "VDDSOC_TVmin = 0x%x\n", pptable->VDDSOC_TVmin); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_HiTemp = 0x%x\n", pptable->VDDGFX_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_LoTemp = 0x%x\n", pptable->VDDGFX_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_HiTemp = 0x%x\n", pptable->VDDSOC_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_LoTemp = 0x%x\n", pptable->VDDSOC_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDGFX_TVminHystersis = 0x%x\n", pptable->VDDGFX_TVminHystersis); |
| dev_info(smu->adev->dev, "VDDSOC_TVminHystersis = 0x%x\n", pptable->VDDSOC_TVminHystersis); |
| |
| dev_info(smu->adev->dev, "[PPCLK_GFXCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_GFXCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_SOCCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_SOCCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_UCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_UCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_UCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_UCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_UCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_UCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_FCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_FCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_FCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_FCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_FCLK].Padding, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_FCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_DCLK_0]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_DCLK_0].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].Padding, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].SsFmin, |
| pptable->DpmDescriptor[PPCLK_DCLK_0].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_VCLK_0]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_VCLK_0].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].Padding, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].SsFmin, |
| pptable->DpmDescriptor[PPCLK_VCLK_0].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_DCLK_1]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_DCLK_1].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].Padding, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].SsFmin, |
| pptable->DpmDescriptor[PPCLK_DCLK_1].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_VCLK_1]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_VCLK_1].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].Padding, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].SsFmin, |
| pptable->DpmDescriptor[PPCLK_VCLK_1].Padding16); |
| |
| dev_info(smu->adev->dev, "FreqTableGfx\n"); |
| for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableGfx[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableVclk\n"); |
| for (i = 0; i < NUM_VCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableVclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableDclk\n"); |
| for (i = 0; i < NUM_DCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableDclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableSocclk\n"); |
| for (i = 0; i < NUM_SOCCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableSocclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableUclk\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableUclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableFclk\n"); |
| for (i = 0; i < NUM_FCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = 0x%x\n", i, pptable->FreqTableFclk[i]); |
| |
| dev_info(smu->adev->dev, "DcModeMaxFreq\n"); |
| dev_info(smu->adev->dev, " .PPCLK_GFXCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_GFXCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_SOCCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_SOCCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_UCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_UCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_FCLK = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_FCLK]); |
| dev_info(smu->adev->dev, " .PPCLK_DCLK_0 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_DCLK_0]); |
| dev_info(smu->adev->dev, " .PPCLK_VCLK_0 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_VCLK_0]); |
| dev_info(smu->adev->dev, " .PPCLK_DCLK_1 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_DCLK_1]); |
| dev_info(smu->adev->dev, " .PPCLK_VCLK_1 = 0x%x\n", pptable->DcModeMaxFreq[PPCLK_VCLK_1]); |
| |
| dev_info(smu->adev->dev, "FreqTableUclkDiv\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FreqTableUclkDiv[i]); |
| |
| dev_info(smu->adev->dev, "FclkBoostFreq = 0x%x\n", pptable->FclkBoostFreq); |
| dev_info(smu->adev->dev, "FclkParamPadding = 0x%x\n", pptable->FclkParamPadding); |
| |
| dev_info(smu->adev->dev, "Mp0clkFreq\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->Mp0clkFreq[i]); |
| |
| dev_info(smu->adev->dev, "Mp0DpmVoltage\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->Mp0DpmVoltage[i]); |
| |
| dev_info(smu->adev->dev, "MemVddciVoltage\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->MemVddciVoltage[i]); |
| |
| dev_info(smu->adev->dev, "MemMvddVoltage\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->MemMvddVoltage[i]); |
| |
| dev_info(smu->adev->dev, "GfxclkFgfxoffEntry = 0x%x\n", pptable->GfxclkFgfxoffEntry); |
| dev_info(smu->adev->dev, "GfxclkFinit = 0x%x\n", pptable->GfxclkFinit); |
| dev_info(smu->adev->dev, "GfxclkFidle = 0x%x\n", pptable->GfxclkFidle); |
| dev_info(smu->adev->dev, "GfxclkSource = 0x%x\n", pptable->GfxclkSource); |
| dev_info(smu->adev->dev, "GfxclkPadding = 0x%x\n", pptable->GfxclkPadding); |
| |
| dev_info(smu->adev->dev, "GfxGpoSubFeatureMask = 0x%x\n", pptable->GfxGpoSubFeatureMask); |
| |
| dev_info(smu->adev->dev, "GfxGpoEnabledWorkPolicyMask = 0x%x\n", pptable->GfxGpoEnabledWorkPolicyMask); |
| dev_info(smu->adev->dev, "GfxGpoDisabledWorkPolicyMask = 0x%x\n", pptable->GfxGpoDisabledWorkPolicyMask); |
| dev_info(smu->adev->dev, "GfxGpoPadding[0] = 0x%x\n", pptable->GfxGpoPadding[0]); |
| dev_info(smu->adev->dev, "GfxGpoVotingAllow = 0x%x\n", pptable->GfxGpoVotingAllow); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[0] = 0x%x\n", pptable->GfxGpoPadding32[0]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[1] = 0x%x\n", pptable->GfxGpoPadding32[1]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[2] = 0x%x\n", pptable->GfxGpoPadding32[2]); |
| dev_info(smu->adev->dev, "GfxGpoPadding32[3] = 0x%x\n", pptable->GfxGpoPadding32[3]); |
| dev_info(smu->adev->dev, "GfxDcsFopt = 0x%x\n", pptable->GfxDcsFopt); |
| dev_info(smu->adev->dev, "GfxDcsFclkFopt = 0x%x\n", pptable->GfxDcsFclkFopt); |
| dev_info(smu->adev->dev, "GfxDcsUclkFopt = 0x%x\n", pptable->GfxDcsUclkFopt); |
| |
| dev_info(smu->adev->dev, "DcsGfxOffVoltage = 0x%x\n", pptable->DcsGfxOffVoltage); |
| dev_info(smu->adev->dev, "DcsMinGfxOffTime = 0x%x\n", pptable->DcsMinGfxOffTime); |
| dev_info(smu->adev->dev, "DcsMaxGfxOffTime = 0x%x\n", pptable->DcsMaxGfxOffTime); |
| dev_info(smu->adev->dev, "DcsMinCreditAccum = 0x%x\n", pptable->DcsMinCreditAccum); |
| dev_info(smu->adev->dev, "DcsExitHysteresis = 0x%x\n", pptable->DcsExitHysteresis); |
| dev_info(smu->adev->dev, "DcsTimeout = 0x%x\n", pptable->DcsTimeout); |
| |
| dev_info(smu->adev->dev, "DcsParamPadding[0] = 0x%x\n", pptable->DcsParamPadding[0]); |
| dev_info(smu->adev->dev, "DcsParamPadding[1] = 0x%x\n", pptable->DcsParamPadding[1]); |
| dev_info(smu->adev->dev, "DcsParamPadding[2] = 0x%x\n", pptable->DcsParamPadding[2]); |
| dev_info(smu->adev->dev, "DcsParamPadding[3] = 0x%x\n", pptable->DcsParamPadding[3]); |
| dev_info(smu->adev->dev, "DcsParamPadding[4] = 0x%x\n", pptable->DcsParamPadding[4]); |
| |
| dev_info(smu->adev->dev, "FlopsPerByteTable\n"); |
| for (i = 0; i < RLC_PACE_TABLE_NUM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FlopsPerByteTable[i]); |
| |
| dev_info(smu->adev->dev, "LowestUclkReservedForUlv = 0x%x\n", pptable->LowestUclkReservedForUlv); |
| dev_info(smu->adev->dev, "vddingMem[0] = 0x%x\n", pptable->PaddingMem[0]); |
| dev_info(smu->adev->dev, "vddingMem[1] = 0x%x\n", pptable->PaddingMem[1]); |
| dev_info(smu->adev->dev, "vddingMem[2] = 0x%x\n", pptable->PaddingMem[2]); |
| |
| dev_info(smu->adev->dev, "UclkDpmPstates\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->UclkDpmPstates[i]); |
| |
| dev_info(smu->adev->dev, "UclkDpmSrcFreqRange\n"); |
| dev_info(smu->adev->dev, " .Fmin = 0x%x\n", |
| pptable->UclkDpmSrcFreqRange.Fmin); |
| dev_info(smu->adev->dev, " .Fmax = 0x%x\n", |
| pptable->UclkDpmSrcFreqRange.Fmax); |
| dev_info(smu->adev->dev, "UclkDpmTargFreqRange\n"); |
| dev_info(smu->adev->dev, " .Fmin = 0x%x\n", |
| pptable->UclkDpmTargFreqRange.Fmin); |
| dev_info(smu->adev->dev, " .Fmax = 0x%x\n", |
| pptable->UclkDpmTargFreqRange.Fmax); |
| dev_info(smu->adev->dev, "UclkDpmMidstepFreq = 0x%x\n", pptable->UclkDpmMidstepFreq); |
| dev_info(smu->adev->dev, "UclkMidstepPadding = 0x%x\n", pptable->UclkMidstepPadding); |
| |
| dev_info(smu->adev->dev, "PcieGenSpeed\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->PcieGenSpeed[i]); |
| |
| dev_info(smu->adev->dev, "PcieLaneCount\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->PcieLaneCount[i]); |
| |
| dev_info(smu->adev->dev, "LclkFreq\n"); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->LclkFreq[i]); |
| |
| dev_info(smu->adev->dev, "FanStopTemp = 0x%x\n", pptable->FanStopTemp); |
| dev_info(smu->adev->dev, "FanStartTemp = 0x%x\n", pptable->FanStartTemp); |
| |
| dev_info(smu->adev->dev, "FanGain\n"); |
| for (i = 0; i < TEMP_COUNT; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->FanGain[i]); |
| |
| dev_info(smu->adev->dev, "FanPwmMin = 0x%x\n", pptable->FanPwmMin); |
| dev_info(smu->adev->dev, "FanAcousticLimitRpm = 0x%x\n", pptable->FanAcousticLimitRpm); |
| dev_info(smu->adev->dev, "FanThrottlingRpm = 0x%x\n", pptable->FanThrottlingRpm); |
| dev_info(smu->adev->dev, "FanMaximumRpm = 0x%x\n", pptable->FanMaximumRpm); |
| dev_info(smu->adev->dev, "MGpuFanBoostLimitRpm = 0x%x\n", pptable->MGpuFanBoostLimitRpm); |
| dev_info(smu->adev->dev, "FanTargetTemperature = 0x%x\n", pptable->FanTargetTemperature); |
| dev_info(smu->adev->dev, "FanTargetGfxclk = 0x%x\n", pptable->FanTargetGfxclk); |
| dev_info(smu->adev->dev, "FanPadding16 = 0x%x\n", pptable->FanPadding16); |
| dev_info(smu->adev->dev, "FanTempInputSelect = 0x%x\n", pptable->FanTempInputSelect); |
| dev_info(smu->adev->dev, "FanPadding = 0x%x\n", pptable->FanPadding); |
| dev_info(smu->adev->dev, "FanZeroRpmEnable = 0x%x\n", pptable->FanZeroRpmEnable); |
| dev_info(smu->adev->dev, "FanTachEdgePerRev = 0x%x\n", pptable->FanTachEdgePerRev); |
| |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorSetDelta = 0x%x\n", pptable->FuzzyFan_ErrorSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorRateSetDelta = 0x%x\n", pptable->FuzzyFan_ErrorRateSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_PwmSetDelta = 0x%x\n", pptable->FuzzyFan_PwmSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_Reserved = 0x%x\n", pptable->FuzzyFan_Reserved); |
| |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "dBtcGbGfxDfllModelSelect = 0x%x\n", pptable->dBtcGbGfxDfllModelSelect); |
| dev_info(smu->adev->dev, "Padding8_Avfs = 0x%x\n", pptable->Padding8_Avfs); |
| |
| dev_info(smu->adev->dev, "qAvfsGb[AVFS_VOLTAGE_GFX]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].a, |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].b, |
| pptable->qAvfsGb[AVFS_VOLTAGE_GFX].c); |
| dev_info(smu->adev->dev, "qAvfsGb[AVFS_VOLTAGE_SOC]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].a, |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].b, |
| pptable->qAvfsGb[AVFS_VOLTAGE_SOC].c); |
| dev_info(smu->adev->dev, "dBtcGbGfxPll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxPll.a, |
| pptable->dBtcGbGfxPll.b, |
| pptable->dBtcGbGfxPll.c); |
| dev_info(smu->adev->dev, "dBtcGbGfxAfll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxDfll.a, |
| pptable->dBtcGbGfxDfll.b, |
| pptable->dBtcGbGfxDfll.c); |
| dev_info(smu->adev->dev, "dBtcGbSoc{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbSoc.a, |
| pptable->dBtcGbSoc.b, |
| pptable->dBtcGbSoc.c); |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_GFX]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].b); |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_SOC]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].b); |
| |
| dev_info(smu->adev->dev, "PiecewiseLinearDroopIntGfxDfll\n"); |
| for (i = 0; i < NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS; i++) { |
| dev_info(smu->adev->dev, " Fset[%d] = 0x%x\n", |
| i, pptable->PiecewiseLinearDroopIntGfxDfll.Fset[i]); |
| dev_info(smu->adev->dev, " Vdroop[%d] = 0x%x\n", |
| i, pptable->PiecewiseLinearDroopIntGfxDfll.Vdroop[i]); |
| } |
| |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_GFX]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].c); |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_SOC]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].c); |
| |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[0] = 0x%x\n", pptable->Padding8_GfxBtc[0]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[1] = 0x%x\n", pptable->Padding8_GfxBtc[1]); |
| |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "XgmiDpmPstates\n"); |
| for (i = 0; i < NUM_XGMI_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiDpmPstates[i]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[0] = 0x%02x\n", pptable->XgmiDpmSpare[0]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[1] = 0x%02x\n", pptable->XgmiDpmSpare[1]); |
| |
| dev_info(smu->adev->dev, "DebugOverrides = 0x%x\n", pptable->DebugOverrides); |
| dev_info(smu->adev->dev, "ReservedEquation0{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation0.a, |
| pptable->ReservedEquation0.b, |
| pptable->ReservedEquation0.c); |
| dev_info(smu->adev->dev, "ReservedEquation1{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation1.a, |
| pptable->ReservedEquation1.b, |
| pptable->ReservedEquation1.c); |
| dev_info(smu->adev->dev, "ReservedEquation2{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation2.a, |
| pptable->ReservedEquation2.b, |
| pptable->ReservedEquation2.c); |
| dev_info(smu->adev->dev, "ReservedEquation3{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation3.a, |
| pptable->ReservedEquation3.b, |
| pptable->ReservedEquation3.c); |
| |
| dev_info(smu->adev->dev, "SkuReserved[0] = 0x%x\n", pptable->SkuReserved[0]); |
| dev_info(smu->adev->dev, "SkuReserved[1] = 0x%x\n", pptable->SkuReserved[1]); |
| dev_info(smu->adev->dev, "SkuReserved[2] = 0x%x\n", pptable->SkuReserved[2]); |
| dev_info(smu->adev->dev, "SkuReserved[3] = 0x%x\n", pptable->SkuReserved[3]); |
| dev_info(smu->adev->dev, "SkuReserved[4] = 0x%x\n", pptable->SkuReserved[4]); |
| dev_info(smu->adev->dev, "SkuReserved[5] = 0x%x\n", pptable->SkuReserved[5]); |
| dev_info(smu->adev->dev, "SkuReserved[6] = 0x%x\n", pptable->SkuReserved[6]); |
| dev_info(smu->adev->dev, "SkuReserved[7] = 0x%x\n", pptable->SkuReserved[7]); |
| |
| dev_info(smu->adev->dev, "GamingClk[0] = 0x%x\n", pptable->GamingClk[0]); |
| dev_info(smu->adev->dev, "GamingClk[1] = 0x%x\n", pptable->GamingClk[1]); |
| dev_info(smu->adev->dev, "GamingClk[2] = 0x%x\n", pptable->GamingClk[2]); |
| dev_info(smu->adev->dev, "GamingClk[3] = 0x%x\n", pptable->GamingClk[3]); |
| dev_info(smu->adev->dev, "GamingClk[4] = 0x%x\n", pptable->GamingClk[4]); |
| dev_info(smu->adev->dev, "GamingClk[5] = 0x%x\n", pptable->GamingClk[5]); |
| |
| for (i = 0; i < NUM_I2C_CONTROLLERS; i++) { |
| dev_info(smu->adev->dev, "I2cControllers[%d]:\n", i); |
| dev_info(smu->adev->dev, " .Enabled = 0x%x\n", |
| pptable->I2cControllers[i].Enabled); |
| dev_info(smu->adev->dev, " .Speed = 0x%x\n", |
| pptable->I2cControllers[i].Speed); |
| dev_info(smu->adev->dev, " .SlaveAddress = 0x%x\n", |
| pptable->I2cControllers[i].SlaveAddress); |
| dev_info(smu->adev->dev, " .ControllerPort = 0x%x\n", |
| pptable->I2cControllers[i].ControllerPort); |
| dev_info(smu->adev->dev, " .ControllerName = 0x%x\n", |
| pptable->I2cControllers[i].ControllerName); |
| dev_info(smu->adev->dev, " .ThermalThrottler = 0x%x\n", |
| pptable->I2cControllers[i].ThermalThrotter); |
| dev_info(smu->adev->dev, " .I2cProtocol = 0x%x\n", |
| pptable->I2cControllers[i].I2cProtocol); |
| dev_info(smu->adev->dev, " .PaddingConfig = 0x%x\n", |
| pptable->I2cControllers[i].PaddingConfig); |
| } |
| |
| dev_info(smu->adev->dev, "GpioScl = 0x%x\n", pptable->GpioScl); |
| dev_info(smu->adev->dev, "GpioSda = 0x%x\n", pptable->GpioSda); |
| dev_info(smu->adev->dev, "FchUsbPdSlaveAddr = 0x%x\n", pptable->FchUsbPdSlaveAddr); |
| dev_info(smu->adev->dev, "I2cSpare[0] = 0x%x\n", pptable->I2cSpare[0]); |
| |
| dev_info(smu->adev->dev, "Board Parameters:\n"); |
| dev_info(smu->adev->dev, "VddGfxVrMapping = 0x%x\n", pptable->VddGfxVrMapping); |
| dev_info(smu->adev->dev, "VddSocVrMapping = 0x%x\n", pptable->VddSocVrMapping); |
| dev_info(smu->adev->dev, "VddMem0VrMapping = 0x%x\n", pptable->VddMem0VrMapping); |
| dev_info(smu->adev->dev, "VddMem1VrMapping = 0x%x\n", pptable->VddMem1VrMapping); |
| dev_info(smu->adev->dev, "GfxUlvPhaseSheddingMask = 0x%x\n", pptable->GfxUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "SocUlvPhaseSheddingMask = 0x%x\n", pptable->SocUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "VddciUlvPhaseSheddingMask = 0x%x\n", pptable->VddciUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "MvddUlvPhaseSheddingMask = 0x%x\n", pptable->MvddUlvPhaseSheddingMask); |
| |
| dev_info(smu->adev->dev, "GfxMaxCurrent = 0x%x\n", pptable->GfxMaxCurrent); |
| dev_info(smu->adev->dev, "GfxOffset = 0x%x\n", pptable->GfxOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetryGfx = 0x%x\n", pptable->Padding_TelemetryGfx); |
| |
| dev_info(smu->adev->dev, "SocMaxCurrent = 0x%x\n", pptable->SocMaxCurrent); |
| dev_info(smu->adev->dev, "SocOffset = 0x%x\n", pptable->SocOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetrySoc = 0x%x\n", pptable->Padding_TelemetrySoc); |
| |
| dev_info(smu->adev->dev, "Mem0MaxCurrent = 0x%x\n", pptable->Mem0MaxCurrent); |
| dev_info(smu->adev->dev, "Mem0Offset = 0x%x\n", pptable->Mem0Offset); |
| dev_info(smu->adev->dev, "Padding_TelemetryMem0 = 0x%x\n", pptable->Padding_TelemetryMem0); |
| |
| dev_info(smu->adev->dev, "Mem1MaxCurrent = 0x%x\n", pptable->Mem1MaxCurrent); |
| dev_info(smu->adev->dev, "Mem1Offset = 0x%x\n", pptable->Mem1Offset); |
| dev_info(smu->adev->dev, "Padding_TelemetryMem1 = 0x%x\n", pptable->Padding_TelemetryMem1); |
| |
| dev_info(smu->adev->dev, "MvddRatio = 0x%x\n", pptable->MvddRatio); |
| |
| dev_info(smu->adev->dev, "AcDcGpio = 0x%x\n", pptable->AcDcGpio); |
| dev_info(smu->adev->dev, "AcDcPolarity = 0x%x\n", pptable->AcDcPolarity); |
| dev_info(smu->adev->dev, "VR0HotGpio = 0x%x\n", pptable->VR0HotGpio); |
| dev_info(smu->adev->dev, "VR0HotPolarity = 0x%x\n", pptable->VR0HotPolarity); |
| dev_info(smu->adev->dev, "VR1HotGpio = 0x%x\n", pptable->VR1HotGpio); |
| dev_info(smu->adev->dev, "VR1HotPolarity = 0x%x\n", pptable->VR1HotPolarity); |
| dev_info(smu->adev->dev, "GthrGpio = 0x%x\n", pptable->GthrGpio); |
| dev_info(smu->adev->dev, "GthrPolarity = 0x%x\n", pptable->GthrPolarity); |
| dev_info(smu->adev->dev, "LedPin0 = 0x%x\n", pptable->LedPin0); |
| dev_info(smu->adev->dev, "LedPin1 = 0x%x\n", pptable->LedPin1); |
| dev_info(smu->adev->dev, "LedPin2 = 0x%x\n", pptable->LedPin2); |
| dev_info(smu->adev->dev, "LedEnableMask = 0x%x\n", pptable->LedEnableMask); |
| dev_info(smu->adev->dev, "LedPcie = 0x%x\n", pptable->LedPcie); |
| dev_info(smu->adev->dev, "LedError = 0x%x\n", pptable->LedError); |
| dev_info(smu->adev->dev, "LedSpare1[0] = 0x%x\n", pptable->LedSpare1[0]); |
| dev_info(smu->adev->dev, "LedSpare1[1] = 0x%x\n", pptable->LedSpare1[1]); |
| |
| dev_info(smu->adev->dev, "PllGfxclkSpreadEnabled = 0x%x\n", pptable->PllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadPercent = 0x%x\n", pptable->PllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadFreq = 0x%x\n", pptable->PllGfxclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadEnabled = 0x%x\n", pptable->DfllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadPercent = 0x%x\n", pptable->DfllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "DfllGfxclkSpreadFreq = 0x%x\n", pptable->DfllGfxclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "UclkSpreadPadding = 0x%x\n", pptable->UclkSpreadPadding); |
| dev_info(smu->adev->dev, "UclkSpreadFreq = 0x%x\n", pptable->UclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "FclkSpreadEnabled = 0x%x\n", pptable->FclkSpreadEnabled); |
| dev_info(smu->adev->dev, "FclkSpreadPercent = 0x%x\n", pptable->FclkSpreadPercent); |
| dev_info(smu->adev->dev, "FclkSpreadFreq = 0x%x\n", pptable->FclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "MemoryChannelEnabled = 0x%x\n", pptable->MemoryChannelEnabled); |
| dev_info(smu->adev->dev, "DramBitWidth = 0x%x\n", pptable->DramBitWidth); |
| dev_info(smu->adev->dev, "PaddingMem1[0] = 0x%x\n", pptable->PaddingMem1[0]); |
| dev_info(smu->adev->dev, "PaddingMem1[1] = 0x%x\n", pptable->PaddingMem1[1]); |
| dev_info(smu->adev->dev, "PaddingMem1[2] = 0x%x\n", pptable->PaddingMem1[2]); |
| |
| dev_info(smu->adev->dev, "TotalBoardPower = 0x%x\n", pptable->TotalBoardPower); |
| dev_info(smu->adev->dev, "BoardPowerPadding = 0x%x\n", pptable->BoardPowerPadding); |
| |
| dev_info(smu->adev->dev, "XgmiLinkSpeed\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiLinkSpeed[i]); |
| dev_info(smu->adev->dev, "XgmiLinkWidth\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiLinkWidth[i]); |
| dev_info(smu->adev->dev, "XgmiFclkFreq\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiFclkFreq[i]); |
| dev_info(smu->adev->dev, "XgmiSocVoltage\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = 0x%x\n", i, pptable->XgmiSocVoltage[i]); |
| |
| dev_info(smu->adev->dev, "HsrEnabled = 0x%x\n", pptable->HsrEnabled); |
| dev_info(smu->adev->dev, "VddqOffEnabled = 0x%x\n", pptable->VddqOffEnabled); |
| dev_info(smu->adev->dev, "PaddingUmcFlags[0] = 0x%x\n", pptable->PaddingUmcFlags[0]); |
| dev_info(smu->adev->dev, "PaddingUmcFlags[1] = 0x%x\n", pptable->PaddingUmcFlags[1]); |
| |
| dev_info(smu->adev->dev, "BoardReserved[0] = 0x%x\n", pptable->BoardReserved[0]); |
| dev_info(smu->adev->dev, "BoardReserved[1] = 0x%x\n", pptable->BoardReserved[1]); |
| dev_info(smu->adev->dev, "BoardReserved[2] = 0x%x\n", pptable->BoardReserved[2]); |
| dev_info(smu->adev->dev, "BoardReserved[3] = 0x%x\n", pptable->BoardReserved[3]); |
| dev_info(smu->adev->dev, "BoardReserved[4] = 0x%x\n", pptable->BoardReserved[4]); |
| dev_info(smu->adev->dev, "BoardReserved[5] = 0x%x\n", pptable->BoardReserved[5]); |
| dev_info(smu->adev->dev, "BoardReserved[6] = 0x%x\n", pptable->BoardReserved[6]); |
| dev_info(smu->adev->dev, "BoardReserved[7] = 0x%x\n", pptable->BoardReserved[7]); |
| dev_info(smu->adev->dev, "BoardReserved[8] = 0x%x\n", pptable->BoardReserved[8]); |
| dev_info(smu->adev->dev, "BoardReserved[9] = 0x%x\n", pptable->BoardReserved[9]); |
| dev_info(smu->adev->dev, "BoardReserved[10] = 0x%x\n", pptable->BoardReserved[10]); |
| |
| dev_info(smu->adev->dev, "MmHubPadding[0] = 0x%x\n", pptable->MmHubPadding[0]); |
| dev_info(smu->adev->dev, "MmHubPadding[1] = 0x%x\n", pptable->MmHubPadding[1]); |
| dev_info(smu->adev->dev, "MmHubPadding[2] = 0x%x\n", pptable->MmHubPadding[2]); |
| dev_info(smu->adev->dev, "MmHubPadding[3] = 0x%x\n", pptable->MmHubPadding[3]); |
| dev_info(smu->adev->dev, "MmHubPadding[4] = 0x%x\n", pptable->MmHubPadding[4]); |
| dev_info(smu->adev->dev, "MmHubPadding[5] = 0x%x\n", pptable->MmHubPadding[5]); |
| dev_info(smu->adev->dev, "MmHubPadding[6] = 0x%x\n", pptable->MmHubPadding[6]); |
| dev_info(smu->adev->dev, "MmHubPadding[7] = 0x%x\n", pptable->MmHubPadding[7]); |
| } |
| |
| static int sienna_cichlid_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msg, int num_msgs) |
| { |
| struct amdgpu_smu_i2c_bus *smu_i2c = i2c_get_adapdata(i2c_adap); |
| struct amdgpu_device *adev = smu_i2c->adev; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *table = &smu_table->driver_table; |
| SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr; |
| int i, j, r, c; |
| u16 dir; |
| |
| if (!adev->pm.dpm_enabled) |
| return -EBUSY; |
| |
| req = kzalloc(sizeof(*req), GFP_KERNEL); |
| if (!req) |
| return -ENOMEM; |
| |
| req->I2CcontrollerPort = smu_i2c->port; |
| req->I2CSpeed = I2C_SPEED_FAST_400K; |
| req->SlaveAddress = msg[0].addr << 1; /* wants an 8-bit address */ |
| dir = msg[0].flags & I2C_M_RD; |
| |
| for (c = i = 0; i < num_msgs; i++) { |
| for (j = 0; j < msg[i].len; j++, c++) { |
| SwI2cCmd_t *cmd = &req->SwI2cCmds[c]; |
| |
| if (!(msg[i].flags & I2C_M_RD)) { |
| /* write */ |
| cmd->CmdConfig |= CMDCONFIG_READWRITE_MASK; |
| cmd->ReadWriteData = msg[i].buf[j]; |
| } |
| |
| if ((dir ^ msg[i].flags) & I2C_M_RD) { |
| /* The direction changes. |
| */ |
| dir = msg[i].flags & I2C_M_RD; |
| cmd->CmdConfig |= CMDCONFIG_RESTART_MASK; |
| } |
| |
| req->NumCmds++; |
| |
| /* |
| * Insert STOP if we are at the last byte of either last |
| * message for the transaction or the client explicitly |
| * requires a STOP at this particular message. |
| */ |
| if ((j == msg[i].len - 1) && |
| ((i == num_msgs - 1) || (msg[i].flags & I2C_M_STOP))) { |
| cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK; |
| cmd->CmdConfig |= CMDCONFIG_STOP_MASK; |
| } |
| } |
| } |
| mutex_lock(&adev->pm.mutex); |
| r = smu_cmn_update_table(smu, SMU_TABLE_I2C_COMMANDS, 0, req, true); |
| mutex_unlock(&adev->pm.mutex); |
| if (r) |
| goto fail; |
| |
| for (c = i = 0; i < num_msgs; i++) { |
| if (!(msg[i].flags & I2C_M_RD)) { |
| c += msg[i].len; |
| continue; |
| } |
| for (j = 0; j < msg[i].len; j++, c++) { |
| SwI2cCmd_t *cmd = &res->SwI2cCmds[c]; |
| |
| msg[i].buf[j] = cmd->ReadWriteData; |
| } |
| } |
| r = num_msgs; |
| fail: |
| kfree(req); |
| return r; |
| } |
| |
| static u32 sienna_cichlid_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| |
| static const struct i2c_algorithm sienna_cichlid_i2c_algo = { |
| .master_xfer = sienna_cichlid_i2c_xfer, |
| .functionality = sienna_cichlid_i2c_func, |
| }; |
| |
| static const struct i2c_adapter_quirks sienna_cichlid_i2c_control_quirks = { |
| .flags = I2C_AQ_COMB | I2C_AQ_COMB_SAME_ADDR | I2C_AQ_NO_ZERO_LEN, |
| .max_read_len = MAX_SW_I2C_COMMANDS, |
| .max_write_len = MAX_SW_I2C_COMMANDS, |
| .max_comb_1st_msg_len = 2, |
| .max_comb_2nd_msg_len = MAX_SW_I2C_COMMANDS - 2, |
| }; |
| |
| static int sienna_cichlid_i2c_control_init(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int res, i; |
| |
| for (i = 0; i < MAX_SMU_I2C_BUSES; i++) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| smu_i2c->adev = adev; |
| smu_i2c->port = i; |
| mutex_init(&smu_i2c->mutex); |
| control->owner = THIS_MODULE; |
| control->class = I2C_CLASS_HWMON; |
| control->dev.parent = &adev->pdev->dev; |
| control->algo = &sienna_cichlid_i2c_algo; |
| snprintf(control->name, sizeof(control->name), "AMDGPU SMU %d", i); |
| control->quirks = &sienna_cichlid_i2c_control_quirks; |
| i2c_set_adapdata(control, smu_i2c); |
| |
| res = i2c_add_adapter(control); |
| if (res) { |
| DRM_ERROR("Failed to register hw i2c, err: %d\n", res); |
| goto Out_err; |
| } |
| } |
| /* assign the buses used for the FRU EEPROM and RAS EEPROM */ |
| /* XXX ideally this would be something in a vbios data table */ |
| adev->pm.ras_eeprom_i2c_bus = &adev->pm.smu_i2c[1].adapter; |
| adev->pm.fru_eeprom_i2c_bus = &adev->pm.smu_i2c[0].adapter; |
| |
| return 0; |
| Out_err: |
| for ( ; i >= 0; i--) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| i2c_del_adapter(control); |
| } |
| return res; |
| } |
| |
| static void sienna_cichlid_i2c_control_fini(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int i; |
| |
| for (i = 0; i < MAX_SMU_I2C_BUSES; i++) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| i2c_del_adapter(control); |
| } |
| adev->pm.ras_eeprom_i2c_bus = NULL; |
| adev->pm.fru_eeprom_i2c_bus = NULL; |
| } |
| |
| static ssize_t sienna_cichlid_get_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_3 *gpu_metrics = |
| (struct gpu_metrics_v1_3 *)smu_table->gpu_metrics_table; |
| SmuMetricsExternal_t metrics_external; |
| SmuMetrics_t *metrics = |
| &(metrics_external.SmuMetrics); |
| SmuMetrics_V2_t *metrics_v2 = |
| &(metrics_external.SmuMetrics_V2); |
| SmuMetrics_V3_t *metrics_v3 = |
| &(metrics_external.SmuMetrics_V3); |
| struct amdgpu_device *adev = smu->adev; |
| bool use_metrics_v2 = false; |
| bool use_metrics_v3 = false; |
| uint16_t average_gfx_activity; |
| int ret = 0; |
| |
| switch (smu->adev->ip_versions[MP1_HWIP][0]) { |
| case IP_VERSION(11, 0, 7): |
| if (smu->smc_fw_version >= 0x3A4900) |
| use_metrics_v3 = true; |
| else if (smu->smc_fw_version >= 0x3A4300) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 11): |
| if (smu->smc_fw_version >= 0x412D00) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 12): |
| if (smu->smc_fw_version >= 0x3B2300) |
| use_metrics_v2 = true; |
| break; |
| case IP_VERSION(11, 0, 13): |
| if (smu->smc_fw_version >= 0x491100) |
| use_metrics_v2 = true; |
| break; |
| default: |
| break; |
| } |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| &metrics_external, |
| true); |
| if (ret) |
| return ret; |
| |
| smu_cmn_init_soft_gpu_metrics(gpu_metrics, 1, 3); |
| |
| gpu_metrics->temperature_edge = use_metrics_v3 ? metrics_v3->TemperatureEdge : |
| use_metrics_v2 ? metrics_v2->TemperatureEdge : metrics->TemperatureEdge; |
| gpu_metrics->temperature_hotspot = use_metrics_v3 ? metrics_v3->TemperatureHotspot : |
| use_metrics_v2 ? metrics_v2->TemperatureHotspot : metrics->TemperatureHotspot; |
| gpu_metrics->temperature_mem = use_metrics_v3 ? metrics_v3->TemperatureMem : |
| use_metrics_v2 ? metrics_v2->TemperatureMem : metrics->TemperatureMem; |
| gpu_metrics->temperature_vrgfx = use_metrics_v3 ? metrics_v3->TemperatureVrGfx : |
| use_metrics_v2 ? metrics_v2->TemperatureVrGfx : metrics->TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = use_metrics_v3 ? metrics_v3->TemperatureVrSoc : |
| use_metrics_v2 ? metrics_v2->TemperatureVrSoc : metrics->TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = use_metrics_v3 ? metrics_v3->TemperatureVrMem0 : |
| use_metrics_v2 ? metrics_v2->TemperatureVrMem0 : metrics->TemperatureVrMem0; |
| |
| gpu_metrics->average_gfx_activity = use_metrics_v3 ? metrics_v3->AverageGfxActivity : |
| use_metrics_v2 ? metrics_v2->AverageGfxActivity : metrics->AverageGfxActivity; |
| gpu_metrics->average_umc_activity = use_metrics_v3 ? metrics_v3->AverageUclkActivity : |
| use_metrics_v2 ? metrics_v2->AverageUclkActivity : metrics->AverageUclkActivity; |
| gpu_metrics->average_mm_activity = use_metrics_v3 ? |
| (metrics_v3->VcnUsagePercentage0 + metrics_v3->VcnUsagePercentage1) / 2 : |
| use_metrics_v2 ? metrics_v2->VcnActivityPercentage : metrics->VcnActivityPercentage; |
| |
| gpu_metrics->average_socket_power = use_metrics_v3 ? metrics_v3->AverageSocketPower : |
| use_metrics_v2 ? metrics_v2->AverageSocketPower : metrics->AverageSocketPower; |
| gpu_metrics->energy_accumulator = use_metrics_v3 ? metrics_v3->EnergyAccumulator : |
| use_metrics_v2 ? metrics_v2->EnergyAccumulator : metrics->EnergyAccumulator; |
| |
| if (metrics->CurrGfxVoltageOffset) |
| gpu_metrics->voltage_gfx = |
| (155000 - 625 * metrics->CurrGfxVoltageOffset) / 100; |
| if (metrics->CurrMemVidOffset) |
| gpu_metrics->voltage_mem = |
| (155000 - 625 * metrics->CurrMemVidOffset) / 100; |
| if (metrics->CurrSocVoltageOffset) |
| gpu_metrics->voltage_soc = |
| (155000 - 625 * metrics->CurrSocVoltageOffset) / 100; |
| |
| average_gfx_activity = use_metrics_v3 ? metrics_v3->AverageGfxActivity : |
| use_metrics_v2 ? metrics_v2->AverageGfxActivity : metrics->AverageGfxActivity; |
| if (average_gfx_activity <= SMU_11_0_7_GFX_BUSY_THRESHOLD) |
| gpu_metrics->average_gfxclk_frequency = |
| use_metrics_v3 ? metrics_v3->AverageGfxclkFrequencyPostDs : |
| use_metrics_v2 ? metrics_v2->AverageGfxclkFrequencyPostDs : |
| metrics->AverageGfxclkFrequencyPostDs; |
| else |
| gpu_metrics->average_gfxclk_frequency = |
| use_metrics_v3 ? metrics_v3->AverageGfxclkFrequencyPreDs : |
| use_metrics_v2 ? metrics_v2->AverageGfxclkFrequencyPreDs : |
| metrics->AverageGfxclkFrequencyPreDs; |
| |
| gpu_metrics->average_uclk_frequency = |
| use_metrics_v3 ? metrics_v3->AverageUclkFrequencyPostDs : |
| use_metrics_v2 ? metrics_v2->AverageUclkFrequencyPostDs : |
| metrics->AverageUclkFrequencyPostDs; |
| gpu_metrics->average_vclk0_frequency = use_metrics_v3 ? metrics_v3->AverageVclk0Frequency : |
| use_metrics_v2 ? metrics_v2->AverageVclk0Frequency : metrics->AverageVclk0Frequency; |
| gpu_metrics->average_dclk0_frequency = use_metrics_v3 ? metrics_v3->AverageDclk0Frequency : |
| use_metrics_v2 ? metrics_v2->AverageDclk0Frequency : metrics->AverageDclk0Frequency; |
| gpu_metrics->average_vclk1_frequency = use_metrics_v3 ? metrics_v3->AverageVclk1Frequency : |
| use_metrics_v2 ? metrics_v2->AverageVclk1Frequency : metrics->AverageVclk1Frequency; |
| gpu_metrics->average_dclk1_frequency = use_metrics_v3 ? metrics_v3->AverageDclk1Frequency : |
| use_metrics_v2 ? metrics_v2->AverageDclk1Frequency : metrics->AverageDclk1Frequency; |
| |
| gpu_metrics->current_gfxclk = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_GFXCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_GFXCLK] : metrics->CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_SOCCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_SOCCLK] : metrics->CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_UCLK] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_UCLK] : metrics->CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_VCLK_0] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_VCLK_0] : metrics->CurrClock[PPCLK_VCLK_0]; |
| gpu_metrics->current_dclk0 = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_DCLK_0] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_DCLK_0] : metrics->CurrClock[PPCLK_DCLK_0]; |
| gpu_metrics->current_vclk1 = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_VCLK_1] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_VCLK_1] : metrics->CurrClock[PPCLK_VCLK_1]; |
| gpu_metrics->current_dclk1 = use_metrics_v3 ? metrics_v3->CurrClock[PPCLK_DCLK_1] : |
| use_metrics_v2 ? metrics_v2->CurrClock[PPCLK_DCLK_1] : metrics->CurrClock[PPCLK_DCLK_1]; |
| |
| gpu_metrics->throttle_status = sienna_cichlid_get_throttler_status_locked(smu); |
| gpu_metrics->indep_throttle_status = |
| smu_cmn_get_indep_throttler_status(gpu_metrics->throttle_status, |
| sienna_cichlid_throttler_map); |
| |
| gpu_metrics->current_fan_speed = use_metrics_v3 ? metrics_v3->CurrFanSpeed : |
| use_metrics_v2 ? metrics_v2->CurrFanSpeed : metrics->CurrFanSpeed; |
| |
| if (((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 7)) && smu->smc_fw_version > 0x003A1E00) || |
| ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(11, 0, 11)) && smu->smc_fw_version > 0x00410400)) { |
| gpu_metrics->pcie_link_width = use_metrics_v3 ? metrics_v3->PcieWidth : |
| use_metrics_v2 ? metrics_v2->PcieWidth : metrics->PcieWidth; |
| gpu_metrics->pcie_link_speed = link_speed[use_metrics_v3 ? metrics_v3->PcieRate : |
| use_metrics_v2 ? metrics_v2->PcieRate : metrics->PcieRate]; |
| } else { |
| gpu_metrics->pcie_link_width = |
| smu_v11_0_get_current_pcie_link_width(smu); |
| gpu_metrics->pcie_link_speed = |
| smu_v11_0_get_current_pcie_link_speed(smu); |
| } |
| |
| gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_3); |
| } |
| |
| static int sienna_cichlid_check_ecc_table_support(struct smu_context *smu) |
| { |
| uint32_t if_version = 0xff, smu_version = 0xff; |
| int ret = 0; |
| |
| ret = smu_cmn_get_smc_version(smu, &if_version, &smu_version); |
| if (ret) |
| return -EOPNOTSUPP; |
| |
| if (smu_version < SUPPORT_ECCTABLE_SMU_VERSION) |
| ret = -EOPNOTSUPP; |
| |
| return ret; |
| } |
| |
| static ssize_t sienna_cichlid_get_ecc_info(struct smu_context *smu, |
| void *table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| EccInfoTable_t *ecc_table = NULL; |
| struct ecc_info_per_ch *ecc_info_per_channel = NULL; |
| int i, ret = 0; |
| struct umc_ecc_info *eccinfo = (struct umc_ecc_info *)table; |
| |
| ret = sienna_cichlid_check_ecc_table_support(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ECCINFO, |
| 0, |
| smu_table->ecc_table, |
| false); |
| if (ret) { |
| dev_info(smu->adev->dev, "Failed to export SMU ecc table!\n"); |
| return ret; |
| } |
| |
| ecc_table = (EccInfoTable_t *)smu_table->ecc_table; |
| |
| for (i = 0; i < SIENNA_CICHLID_UMC_CHANNEL_NUM; i++) { |
| ecc_info_per_channel = &(eccinfo->ecc[i]); |
| ecc_info_per_channel->ce_count_lo_chip = |
| ecc_table->EccInfo[i].ce_count_lo_chip; |
| ecc_info_per_channel->ce_count_hi_chip = |
| ecc_table->EccInfo[i].ce_count_hi_chip; |
| ecc_info_per_channel->mca_umc_status = |
| ecc_table->EccInfo[i].mca_umc_status; |
| ecc_info_per_channel->mca_umc_addr = |
| ecc_table->EccInfo[i].mca_umc_addr; |
| } |
| |
| return ret; |
| } |
| static int sienna_cichlid_enable_mgpu_fan_boost(struct smu_context *smu) |
| { |
| uint16_t *mgpu_fan_boost_limit_rpm; |
| |
| GET_PPTABLE_MEMBER(MGpuFanBoostLimitRpm, &mgpu_fan_boost_limit_rpm); |
| /* |
| * Skip the MGpuFanBoost setting for those ASICs |
| * which do not support it |
| */ |
| if (*mgpu_fan_boost_limit_rpm == 0) |
| return 0; |
| |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetMGpuFanBoostLimitRpm, |
| 0, |
| NULL); |
| } |
| |
| static int sienna_cichlid_gpo_control(struct smu_context *smu, |
| bool enablement) |
| { |
| uint32_t smu_version; |
| int ret = 0; |
| |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFX_GPO_BIT)) { |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) |
| return ret; |
| |
| if (enablement) { |
| if (smu_version < 0x003a2500) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetGpoFeaturePMask, |
| GFX_GPO_PACE_MASK | GFX_GPO_DEM_MASK, |
| NULL); |
| } else { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_DisallowGpo, |
| 0, |
| NULL); |
| } |
| } else { |
| if (smu_version < 0x003a2500) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetGpoFeaturePMask, |
| 0, |
| NULL); |
| } else { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_DisallowGpo, |
| 1, |
| NULL); |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int sienna_cichlid_notify_2nd_usb20_port(struct smu_context *smu) |
| { |
| uint32_t smu_version; |
| int ret = 0; |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) |
| return ret; |
| |
| /* |
| * Message SMU_MSG_Enable2ndUSB20Port is supported by 58.45 |
| * onwards PMFWs. |
| */ |
| if (smu_version < 0x003A2D00) |
| return 0; |
| |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_Enable2ndUSB20Port, |
| smu->smu_table.boot_values.firmware_caps & ATOM_FIRMWARE_CAP_ENABLE_2ND_USB20PORT ? |
| 1 : 0, |
| NULL); |
| } |
| |
| static int sienna_cichlid_system_features_control(struct smu_context *smu, |
| bool en) |
| { |
| int ret = 0; |
| |
| if (en) { |
| ret = sienna_cichlid_notify_2nd_usb20_port(smu); |
| if (ret) |
| return ret; |
| } |
| |
| return smu_v11_0_system_features_control(smu, en); |
| } |
| |
| static int sienna_cichlid_set_mp1_state(struct smu_context *smu, |
| enum pp_mp1_state mp1_state) |
| { |
| int ret; |
| |
| switch (mp1_state) { |
| case PP_MP1_STATE_UNLOAD: |
| ret = smu_cmn_set_mp1_state(smu, mp1_state); |
| break; |
| default: |
| /* Ignore others */ |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static void sienna_cichlid_stb_init(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t reg; |
| |
| reg = RREG32_PCIE(MP1_Public | smnMP1_PMI_3_START); |
| smu->stb_context.enabled = REG_GET_FIELD(reg, MP1_PMI_3_START, ENABLE); |
| |
| /* STB is disabled */ |
| if (!smu->stb_context.enabled) |
| return; |
| |
| spin_lock_init(&smu->stb_context.lock); |
| |
| /* STB buffer size in bytes as function of FIFO depth */ |
| reg = RREG32_PCIE(MP1_Public | smnMP1_PMI_3_FIFO); |
| smu->stb_context.stb_buf_size = 1 << REG_GET_FIELD(reg, MP1_PMI_3_FIFO, DEPTH); |
| smu->stb_context.stb_buf_size *= SIENNA_CICHLID_STB_DEPTH_UNIT_BYTES; |
| |
| dev_info(smu->adev->dev, "STB initialized to %d entries", |
| smu->stb_context.stb_buf_size / SIENNA_CICHLID_STB_DEPTH_UNIT_BYTES); |
| |
| } |
| |
| static int sienna_cichlid_get_default_config_table_settings(struct smu_context *smu, |
| struct config_table_setting *table) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (!table) |
| return -EINVAL; |
| |
| table->gfxclk_average_tau = 10; |
| table->socclk_average_tau = 10; |
| table->fclk_average_tau = 10; |
| table->uclk_average_tau = 10; |
| table->gfx_activity_average_tau = 10; |
| table->mem_activity_average_tau = 10; |
| table->socket_power_average_tau = 100; |
| if (adev->ip_versions[MP1_HWIP][0] != IP_VERSION(11, 0, 7)) |
| table->apu_socket_power_average_tau = 100; |
| |
| return 0; |
| } |
| |
| static int sienna_cichlid_set_config_table(struct smu_context *smu, |
| struct config_table_setting *table) |
| { |
| DriverSmuConfigExternal_t driver_smu_config_table; |
| |
| if (!table) |
| return -EINVAL; |
| |
| memset(&driver_smu_config_table, |
| 0, |
| sizeof(driver_smu_config_table)); |
| driver_smu_config_table.DriverSmuConfig.GfxclkAverageLpfTau = |
| table->gfxclk_average_tau; |
| driver_smu_config_table.DriverSmuConfig.FclkAverageLpfTau = |
| table->fclk_average_tau; |
| driver_smu_config_table.DriverSmuConfig.UclkAverageLpfTau = |
| table->uclk_average_tau; |
| driver_smu_config_table.DriverSmuConfig.GfxActivityLpfTau = |
| table->gfx_activity_average_tau; |
| driver_smu_config_table.DriverSmuConfig.UclkActivityLpfTau = |
| table->mem_activity_average_tau; |
| driver_smu_config_table.DriverSmuConfig.SocketPowerLpfTau = |
| table->socket_power_average_tau; |
| |
| return smu_cmn_update_table(smu, |
| SMU_TABLE_DRIVER_SMU_CONFIG, |
| 0, |
| (void *)&driver_smu_config_table, |
| true); |
| } |
| |
| static int sienna_cichlid_stb_get_data_direct(struct smu_context *smu, |
| void *buf, |
| uint32_t size) |
| { |
| uint32_t *p = buf; |
| struct amdgpu_device *adev = smu->adev; |
| |
| /* No need to disable interrupts for now as we don't lock it yet from ISR */ |
| spin_lock(&smu->stb_context.lock); |
| |
| /* |
| * Read the STB FIFO in units of 32bit since this is the accessor window |
| * (register width) we have. |
| */ |
| buf = ((char *) buf) + size; |
| while ((void *)p < buf) |
| *p++ = cpu_to_le32(RREG32_PCIE(MP1_Public | smnMP1_PMI_3)); |
| |
| spin_unlock(&smu->stb_context.lock); |
| |
| return 0; |
| } |
| |
| static const struct pptable_funcs sienna_cichlid_ppt_funcs = { |
| .get_allowed_feature_mask = sienna_cichlid_get_allowed_feature_mask, |
| .set_default_dpm_table = sienna_cichlid_set_default_dpm_table, |
| .dpm_set_vcn_enable = sienna_cichlid_dpm_set_vcn_enable, |
| .dpm_set_jpeg_enable = sienna_cichlid_dpm_set_jpeg_enable, |
| .i2c_init = sienna_cichlid_i2c_control_init, |
| .i2c_fini = sienna_cichlid_i2c_control_fini, |
| .print_clk_levels = sienna_cichlid_print_clk_levels, |
| .force_clk_levels = sienna_cichlid_force_clk_levels, |
| .populate_umd_state_clk = sienna_cichlid_populate_umd_state_clk, |
| .pre_display_config_changed = sienna_cichlid_pre_display_config_changed, |
| .display_config_changed = sienna_cichlid_display_config_changed, |
| .notify_smc_display_config = sienna_cichlid_notify_smc_display_config, |
| .is_dpm_running = sienna_cichlid_is_dpm_running, |
| .get_fan_speed_pwm = smu_v11_0_get_fan_speed_pwm, |
| .get_fan_speed_rpm = sienna_cichlid_get_fan_speed_rpm, |
| .get_power_profile_mode = sienna_cichlid_get_power_profile_mode, |
| .set_power_profile_mode = sienna_cichlid_set_power_profile_mode, |
| .set_watermarks_table = sienna_cichlid_set_watermarks_table, |
| .read_sensor = sienna_cichlid_read_sensor, |
| .get_uclk_dpm_states = sienna_cichlid_get_uclk_dpm_states, |
| .set_performance_level = smu_v11_0_set_performance_level, |
| .get_thermal_temperature_range = sienna_cichlid_get_thermal_temperature_range, |
| .display_disable_memory_clock_switch = sienna_cichlid_display_disable_memory_clock_switch, |
| .get_power_limit = sienna_cichlid_get_power_limit, |
| .update_pcie_parameters = sienna_cichlid_update_pcie_parameters, |
| .dump_pptable = sienna_cichlid_dump_pptable, |
| .init_microcode = smu_v11_0_init_microcode, |
| .load_microcode = smu_v11_0_load_microcode, |
| .init_smc_tables = sienna_cichlid_init_smc_tables, |
| .fini_smc_tables = smu_v11_0_fini_smc_tables, |
| .init_power = smu_v11_0_init_power, |
| .fini_power = smu_v11_0_fini_power, |
| .check_fw_status = smu_v11_0_check_fw_status, |
| .setup_pptable = sienna_cichlid_setup_pptable, |
| .get_vbios_bootup_values = smu_v11_0_get_vbios_bootup_values, |
| .check_fw_version = smu_v11_0_check_fw_version, |
| .write_pptable = smu_cmn_write_pptable, |
| .set_driver_table_location = smu_v11_0_set_driver_table_location, |
| .set_tool_table_location = smu_v11_0_set_tool_table_location, |
| .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, |
| .system_features_control = sienna_cichlid_system_features_control, |
| .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param, |
| .send_smc_msg = smu_cmn_send_smc_msg, |
| .init_display_count = NULL, |
| .set_allowed_mask = smu_v11_0_set_allowed_mask, |
| .get_enabled_mask = smu_cmn_get_enabled_mask, |
| .feature_is_enabled = smu_cmn_feature_is_enabled, |
| .disable_all_features_with_exception = smu_cmn_disable_all_features_with_exception, |
| .notify_display_change = NULL, |
| .set_power_limit = smu_v11_0_set_power_limit, |
| .init_max_sustainable_clocks = smu_v11_0_init_max_sustainable_clocks, |
| .enable_thermal_alert = smu_v11_0_enable_thermal_alert, |
| .disable_thermal_alert = smu_v11_0_disable_thermal_alert, |
| .set_min_dcef_deep_sleep = NULL, |
| .display_clock_voltage_request = smu_v11_0_display_clock_voltage_request, |
| .get_fan_control_mode = smu_v11_0_get_fan_control_mode, |
| .set_fan_control_mode = smu_v11_0_set_fan_control_mode, |
| .set_fan_speed_pwm = smu_v11_0_set_fan_speed_pwm, |
| .set_fan_speed_rpm = smu_v11_0_set_fan_speed_rpm, |
| .set_xgmi_pstate = smu_v11_0_set_xgmi_pstate, |
| .gfx_off_control = smu_v11_0_gfx_off_control, |
| .register_irq_handler = smu_v11_0_register_irq_handler, |
| .set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme, |
| .get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc, |
| .baco_is_support = smu_v11_0_baco_is_support, |
| .baco_get_state = smu_v11_0_baco_get_state, |
| .baco_set_state = smu_v11_0_baco_set_state, |
| .baco_enter = sienna_cichlid_baco_enter, |
| .baco_exit = sienna_cichlid_baco_exit, |
| .mode1_reset_is_support = sienna_cichlid_is_mode1_reset_supported, |
| .mode1_reset = smu_v11_0_mode1_reset, |
| .get_dpm_ultimate_freq = sienna_cichlid_get_dpm_ultimate_freq, |
| .set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range, |
| .set_default_od_settings = sienna_cichlid_set_default_od_settings, |
| .od_edit_dpm_table = sienna_cichlid_od_edit_dpm_table, |
| .restore_user_od_settings = smu_v11_0_restore_user_od_settings, |
| .run_btc = sienna_cichlid_run_btc, |
| .set_power_source = smu_v11_0_set_power_source, |
| .get_pp_feature_mask = smu_cmn_get_pp_feature_mask, |
| .set_pp_feature_mask = smu_cmn_set_pp_feature_mask, |
| .get_gpu_metrics = sienna_cichlid_get_gpu_metrics, |
| .enable_mgpu_fan_boost = sienna_cichlid_enable_mgpu_fan_boost, |
| .gfx_ulv_control = smu_v11_0_gfx_ulv_control, |
| .deep_sleep_control = smu_v11_0_deep_sleep_control, |
| .get_fan_parameters = sienna_cichlid_get_fan_parameters, |
| .interrupt_work = smu_v11_0_interrupt_work, |
| .gpo_control = sienna_cichlid_gpo_control, |
| .set_mp1_state = sienna_cichlid_set_mp1_state, |
| .stb_collect_info = sienna_cichlid_stb_get_data_direct, |
| .get_ecc_info = sienna_cichlid_get_ecc_info, |
| .get_default_config_table_settings = sienna_cichlid_get_default_config_table_settings, |
| .set_config_table = sienna_cichlid_set_config_table, |
| .get_unique_id = sienna_cichlid_get_unique_id, |
| }; |
| |
| void sienna_cichlid_set_ppt_funcs(struct smu_context *smu) |
| { |
| smu->ppt_funcs = &sienna_cichlid_ppt_funcs; |
| smu->message_map = sienna_cichlid_message_map; |
| smu->clock_map = sienna_cichlid_clk_map; |
| smu->feature_map = sienna_cichlid_feature_mask_map; |
| smu->table_map = sienna_cichlid_table_map; |
| smu->pwr_src_map = sienna_cichlid_pwr_src_map; |
| smu->workload_map = sienna_cichlid_workload_map; |
| smu_v11_0_set_smu_mailbox_registers(smu); |
| } |