|  | /* orinoco_nortel.c | 
|  | * | 
|  | * Driver for Prism II devices which would usually be driven by orinoco_cs, | 
|  | * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in | 
|  | * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. | 
|  | * | 
|  | * Copyright (C) 2002 Tobias Hoffmann | 
|  | *           (C) 2003 Christoph Jungegger <disdos@traum404.de> | 
|  | * | 
|  | * Some of this code is borrowed from orinoco_plx.c | 
|  | *	Copyright (C) 2001 Daniel Barlow | 
|  | * Some of this code is borrowed from orinoco_pci.c | 
|  | *  Copyright (C) 2001 Jean Tourrilhes | 
|  | * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing | 
|  | * has been copied from it. linux-wlan-ng-0.1.10 is originally : | 
|  | *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved. | 
|  | * | 
|  | * The contents of this file are subject to the Mozilla Public License | 
|  | * Version 1.1 (the "License"); you may not use this file except in | 
|  | * compliance with the License. You may obtain a copy of the License | 
|  | * at http://www.mozilla.org/MPL/ | 
|  | * | 
|  | * Software distributed under the License is distributed on an "AS IS" | 
|  | * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See | 
|  | * the License for the specific language governing rights and | 
|  | * limitations under the License. | 
|  | * | 
|  | * Alternatively, the contents of this file may be used under the | 
|  | * terms of the GNU General Public License version 2 (the "GPL"), in | 
|  | * which case the provisions of the GPL are applicable instead of the | 
|  | * above.  If you wish to allow the use of your version of this file | 
|  | * only under the terms of the GPL and not to allow others to use your | 
|  | * version of this file under the MPL, indicate your decision by | 
|  | * deleting the provisions above and replace them with the notice and | 
|  | * other provisions required by the GPL.  If you do not delete the | 
|  | * provisions above, a recipient may use your version of this file | 
|  | * under either the MPL or the GPL. | 
|  | */ | 
|  |  | 
|  | #define DRIVER_NAME "orinoco_nortel" | 
|  | #define PFX DRIVER_NAME ": " | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pci.h> | 
|  | #include <pcmcia/cisreg.h> | 
|  |  | 
|  | #include "orinoco.h" | 
|  | #include "orinoco_pci.h" | 
|  |  | 
|  | #define COR_OFFSET    (0xe0)	/* COR attribute offset of Prism2 PC card */ | 
|  | #define COR_VALUE     (COR_LEVEL_REQ | COR_FUNC_ENA)	/* Enable PC card with interrupt in level trigger */ | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Do a soft reset of the card using the Configuration Option Register | 
|  | * We need this to get going... | 
|  | * This is the part of the code that is strongly inspired from wlan-ng | 
|  | * | 
|  | * Note bis : Don't try to access HERMES_CMD during the reset phase. | 
|  | * It just won't work ! | 
|  | */ | 
|  | static int orinoco_nortel_cor_reset(struct orinoco_private *priv) | 
|  | { | 
|  | struct orinoco_pci_card *card = priv->card; | 
|  |  | 
|  | /* Assert the reset until the card notices */ | 
|  | iowrite16(8, card->bridge_io + 2); | 
|  | ioread16(card->attr_io + COR_OFFSET); | 
|  | iowrite16(0x80, card->attr_io + COR_OFFSET); | 
|  | mdelay(1); | 
|  |  | 
|  | /* Give time for the card to recover from this hard effort */ | 
|  | iowrite16(0, card->attr_io + COR_OFFSET); | 
|  | iowrite16(0, card->attr_io + COR_OFFSET); | 
|  | mdelay(1); | 
|  |  | 
|  | /* Set COR as usual */ | 
|  | iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); | 
|  | iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); | 
|  | mdelay(1); | 
|  |  | 
|  | iowrite16(0x228, card->bridge_io + 2); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) | 
|  | { | 
|  | int i; | 
|  | u32 reg; | 
|  |  | 
|  | /* Setup bridge */ | 
|  | if (ioread16(card->bridge_io) & 1) { | 
|  | printk(KERN_ERR PFX "brg1 answer1 wrong\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | iowrite16(0x118, card->bridge_io + 2); | 
|  | iowrite16(0x108, card->bridge_io + 2); | 
|  | mdelay(30); | 
|  | iowrite16(0x8, card->bridge_io + 2); | 
|  | for (i = 0; i < 30; i++) { | 
|  | mdelay(30); | 
|  | if (ioread16(card->bridge_io) & 0x10) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (i == 30) { | 
|  | printk(KERN_ERR PFX "brg1 timed out\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | if (ioread16(card->attr_io + COR_OFFSET) & 1) { | 
|  | printk(KERN_ERR PFX "brg2 answer1 wrong\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { | 
|  | printk(KERN_ERR PFX "brg2 answer2 wrong\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { | 
|  | printk(KERN_ERR PFX "brg2 answer3 wrong\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Set the PCMCIA COR register */ | 
|  | iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); | 
|  | mdelay(1); | 
|  | reg = ioread16(card->attr_io + COR_OFFSET); | 
|  | if (reg != COR_VALUE) { | 
|  | printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", | 
|  | reg); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Set LEDs */ | 
|  | iowrite16(1, card->bridge_io + 10); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int orinoco_nortel_init_one(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | int err; | 
|  | struct orinoco_private *priv; | 
|  | struct orinoco_pci_card *card; | 
|  | struct net_device *dev; | 
|  | void __iomem *hermes_io, *bridge_io, *attr_io; | 
|  |  | 
|  | err = pci_enable_device(pdev); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Cannot enable PCI device\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = pci_request_regions(pdev, DRIVER_NAME); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); | 
|  | goto fail_resources; | 
|  | } | 
|  |  | 
|  | bridge_io = pci_iomap(pdev, 0, 0); | 
|  | if (!bridge_io) { | 
|  | printk(KERN_ERR PFX "Cannot map bridge registers\n"); | 
|  | err = -EIO; | 
|  | goto fail_map_bridge; | 
|  | } | 
|  |  | 
|  | attr_io = pci_iomap(pdev, 1, 0); | 
|  | if (!attr_io) { | 
|  | printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); | 
|  | err = -EIO; | 
|  | goto fail_map_attr; | 
|  | } | 
|  |  | 
|  | hermes_io = pci_iomap(pdev, 2, 0); | 
|  | if (!hermes_io) { | 
|  | printk(KERN_ERR PFX "Cannot map chipset registers\n"); | 
|  | err = -EIO; | 
|  | goto fail_map_hermes; | 
|  | } | 
|  |  | 
|  | /* Allocate network device */ | 
|  | dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset); | 
|  | if (!dev) { | 
|  | printk(KERN_ERR PFX "Cannot allocate network device\n"); | 
|  | err = -ENOMEM; | 
|  | goto fail_alloc; | 
|  | } | 
|  |  | 
|  | priv = netdev_priv(dev); | 
|  | card = priv->card; | 
|  | card->bridge_io = bridge_io; | 
|  | card->attr_io = attr_io; | 
|  | SET_NETDEV_DEV(dev, &pdev->dev); | 
|  |  | 
|  | hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); | 
|  |  | 
|  | err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, | 
|  | dev->name, dev); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); | 
|  | err = -EBUSY; | 
|  | goto fail_irq; | 
|  | } | 
|  |  | 
|  | err = orinoco_nortel_hw_init(card); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Hardware initialization failed\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | err = orinoco_nortel_cor_reset(priv); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Initial reset failed\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | err = register_netdev(dev); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Cannot register network device\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, dev); | 
|  | printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, | 
|  | pci_name(pdev)); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | free_irq(pdev->irq, dev); | 
|  |  | 
|  | fail_irq: | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | free_orinocodev(dev); | 
|  |  | 
|  | fail_alloc: | 
|  | pci_iounmap(pdev, hermes_io); | 
|  |  | 
|  | fail_map_hermes: | 
|  | pci_iounmap(pdev, attr_io); | 
|  |  | 
|  | fail_map_attr: | 
|  | pci_iounmap(pdev, bridge_io); | 
|  |  | 
|  | fail_map_bridge: | 
|  | pci_release_regions(pdev); | 
|  |  | 
|  | fail_resources: | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct orinoco_private *priv = netdev_priv(dev); | 
|  | struct orinoco_pci_card *card = priv->card; | 
|  |  | 
|  | /* Clear LEDs */ | 
|  | iowrite16(0, card->bridge_io + 10); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  | free_irq(pdev->irq, dev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | free_orinocodev(dev); | 
|  | pci_iounmap(pdev, priv->hw.iobase); | 
|  | pci_iounmap(pdev, card->attr_io); | 
|  | pci_iounmap(pdev, card->bridge_io); | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | } | 
|  |  | 
|  | static struct pci_device_id orinoco_nortel_id_table[] = { | 
|  | /* Nortel emobility PCI */ | 
|  | {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, | 
|  | /* Symbol LA-4123 PCI */ | 
|  | {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, | 
|  | {0,}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); | 
|  |  | 
|  | static struct pci_driver orinoco_nortel_driver = { | 
|  | .name		= DRIVER_NAME, | 
|  | .id_table	= orinoco_nortel_id_table, | 
|  | .probe		= orinoco_nortel_init_one, | 
|  | .remove		= __devexit_p(orinoco_nortel_remove_one), | 
|  | .suspend	= orinoco_pci_suspend, | 
|  | .resume		= orinoco_pci_resume, | 
|  | }; | 
|  |  | 
|  | static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION | 
|  | " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; | 
|  | MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); | 
|  | MODULE_DESCRIPTION | 
|  | ("Driver for wireless LAN cards using the Nortel PCI bridge"); | 
|  | MODULE_LICENSE("Dual MPL/GPL"); | 
|  |  | 
|  | static int __init orinoco_nortel_init(void) | 
|  | { | 
|  | printk(KERN_DEBUG "%s\n", version); | 
|  | return pci_register_driver(&orinoco_nortel_driver); | 
|  | } | 
|  |  | 
|  | static void __exit orinoco_nortel_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&orinoco_nortel_driver); | 
|  | } | 
|  |  | 
|  | module_init(orinoco_nortel_init); | 
|  | module_exit(orinoco_nortel_exit); | 
|  |  | 
|  | /* | 
|  | * Local variables: | 
|  | *  c-indent-level: 8 | 
|  | *  c-basic-offset: 8 | 
|  | *  tab-width: 8 | 
|  | * End: | 
|  | */ |