| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018 NXP |
| * Author: Dong Aisheng <aisheng.dong@nxp.com> |
| * |
| * Implementation of the SCU IPC functions using MUs (client side). |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/firmware/imx/types.h> |
| #include <linux/firmware/imx/ipc.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/mailbox_client.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| |
| #define SCU_MU_CHAN_NUM 8 |
| #define MAX_RX_TIMEOUT (msecs_to_jiffies(30)) |
| |
| struct imx_sc_chan { |
| struct imx_sc_ipc *sc_ipc; |
| |
| struct mbox_client cl; |
| struct mbox_chan *ch; |
| int idx; |
| }; |
| |
| struct imx_sc_ipc { |
| /* SCU uses 4 Tx and 4 Rx channels */ |
| struct imx_sc_chan chans[SCU_MU_CHAN_NUM]; |
| struct device *dev; |
| struct mutex lock; |
| struct completion done; |
| |
| /* temporarily store the SCU msg */ |
| u32 *msg; |
| u8 rx_size; |
| u8 count; |
| }; |
| |
| /* |
| * This type is used to indicate error response for most functions. |
| */ |
| enum imx_sc_error_codes { |
| IMX_SC_ERR_NONE = 0, /* Success */ |
| IMX_SC_ERR_VERSION = 1, /* Incompatible API version */ |
| IMX_SC_ERR_CONFIG = 2, /* Configuration error */ |
| IMX_SC_ERR_PARM = 3, /* Bad parameter */ |
| IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */ |
| IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */ |
| IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */ |
| IMX_SC_ERR_NOTFOUND = 7, /* Not found */ |
| IMX_SC_ERR_NOPOWER = 8, /* No power */ |
| IMX_SC_ERR_IPC = 9, /* Generic IPC error */ |
| IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */ |
| IMX_SC_ERR_FAIL = 11, /* General I/O failure */ |
| IMX_SC_ERR_LAST |
| }; |
| |
| static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = { |
| 0, /* IMX_SC_ERR_NONE */ |
| -EINVAL, /* IMX_SC_ERR_VERSION */ |
| -EINVAL, /* IMX_SC_ERR_CONFIG */ |
| -EINVAL, /* IMX_SC_ERR_PARM */ |
| -EACCES, /* IMX_SC_ERR_NOACCESS */ |
| -EACCES, /* IMX_SC_ERR_LOCKED */ |
| -ERANGE, /* IMX_SC_ERR_UNAVAILABLE */ |
| -EEXIST, /* IMX_SC_ERR_NOTFOUND */ |
| -EPERM, /* IMX_SC_ERR_NOPOWER */ |
| -EPIPE, /* IMX_SC_ERR_IPC */ |
| -EBUSY, /* IMX_SC_ERR_BUSY */ |
| -EIO, /* IMX_SC_ERR_FAIL */ |
| }; |
| |
| static struct imx_sc_ipc *imx_sc_ipc_handle; |
| |
| static inline int imx_sc_to_linux_errno(int errno) |
| { |
| if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST) |
| return imx_sc_linux_errmap[errno]; |
| return -EIO; |
| } |
| |
| /* |
| * Get the default handle used by SCU |
| */ |
| int imx_scu_get_handle(struct imx_sc_ipc **ipc) |
| { |
| if (!imx_sc_ipc_handle) |
| return -EPROBE_DEFER; |
| |
| *ipc = imx_sc_ipc_handle; |
| return 0; |
| } |
| EXPORT_SYMBOL(imx_scu_get_handle); |
| |
| static void imx_scu_rx_callback(struct mbox_client *c, void *msg) |
| { |
| struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl); |
| struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc; |
| struct imx_sc_rpc_msg *hdr; |
| u32 *data = msg; |
| |
| if (sc_chan->idx == 0) { |
| hdr = msg; |
| sc_ipc->rx_size = hdr->size; |
| dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size); |
| if (sc_ipc->rx_size > 4) |
| dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n", |
| sc_ipc->rx_size); |
| } |
| |
| sc_ipc->msg[sc_chan->idx] = *data; |
| sc_ipc->count++; |
| |
| dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx, |
| sc_ipc->count, *data); |
| |
| if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size)) |
| complete(&sc_ipc->done); |
| } |
| |
| static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg) |
| { |
| struct imx_sc_rpc_msg *hdr = msg; |
| struct imx_sc_chan *sc_chan; |
| u32 *data = msg; |
| int ret; |
| int i; |
| |
| /* Check size */ |
| if (hdr->size > IMX_SC_RPC_MAX_MSG) |
| return -EINVAL; |
| |
| dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc, |
| hdr->func, hdr->size); |
| |
| for (i = 0; i < hdr->size; i++) { |
| sc_chan = &sc_ipc->chans[i % 4]; |
| ret = mbox_send_message(sc_chan->ch, &data[i]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * RPC command/response |
| */ |
| int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) |
| { |
| struct imx_sc_rpc_msg *hdr; |
| int ret; |
| |
| if (WARN_ON(!sc_ipc || !msg)) |
| return -EINVAL; |
| |
| mutex_lock(&sc_ipc->lock); |
| reinit_completion(&sc_ipc->done); |
| |
| sc_ipc->msg = msg; |
| sc_ipc->count = 0; |
| ret = imx_scu_ipc_write(sc_ipc, msg); |
| if (ret < 0) { |
| dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret); |
| goto out; |
| } |
| |
| if (have_resp) { |
| if (!wait_for_completion_timeout(&sc_ipc->done, |
| MAX_RX_TIMEOUT)) { |
| dev_err(sc_ipc->dev, "RPC send msg timeout\n"); |
| mutex_unlock(&sc_ipc->lock); |
| return -ETIMEDOUT; |
| } |
| |
| /* response status is stored in hdr->func field */ |
| hdr = msg; |
| ret = hdr->func; |
| } |
| |
| out: |
| mutex_unlock(&sc_ipc->lock); |
| |
| dev_dbg(sc_ipc->dev, "RPC SVC done\n"); |
| |
| return imx_sc_to_linux_errno(ret); |
| } |
| EXPORT_SYMBOL(imx_scu_call_rpc); |
| |
| static int imx_scu_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct imx_sc_ipc *sc_ipc; |
| struct imx_sc_chan *sc_chan; |
| struct mbox_client *cl; |
| char *chan_name; |
| int ret; |
| int i; |
| |
| sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL); |
| if (!sc_ipc) |
| return -ENOMEM; |
| |
| for (i = 0; i < SCU_MU_CHAN_NUM; i++) { |
| if (i < 4) |
| chan_name = kasprintf(GFP_KERNEL, "tx%d", i); |
| else |
| chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4); |
| |
| if (!chan_name) |
| return -ENOMEM; |
| |
| sc_chan = &sc_ipc->chans[i]; |
| cl = &sc_chan->cl; |
| cl->dev = dev; |
| cl->tx_block = false; |
| cl->knows_txdone = true; |
| cl->rx_callback = imx_scu_rx_callback; |
| |
| sc_chan->sc_ipc = sc_ipc; |
| sc_chan->idx = i % 4; |
| sc_chan->ch = mbox_request_channel_byname(cl, chan_name); |
| if (IS_ERR(sc_chan->ch)) { |
| ret = PTR_ERR(sc_chan->ch); |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Failed to request mbox chan %s ret %d\n", |
| chan_name, ret); |
| return ret; |
| } |
| |
| dev_dbg(dev, "request mbox chan %s\n", chan_name); |
| /* chan_name is not used anymore by framework */ |
| kfree(chan_name); |
| } |
| |
| sc_ipc->dev = dev; |
| mutex_init(&sc_ipc->lock); |
| init_completion(&sc_ipc->done); |
| |
| imx_sc_ipc_handle = sc_ipc; |
| |
| dev_info(dev, "NXP i.MX SCU Initialized\n"); |
| |
| return devm_of_platform_populate(dev); |
| } |
| |
| static const struct of_device_id imx_scu_match[] = { |
| { .compatible = "fsl,imx-scu", }, |
| { /* Sentinel */ } |
| }; |
| |
| static struct platform_driver imx_scu_driver = { |
| .driver = { |
| .name = "imx-scu", |
| .of_match_table = imx_scu_match, |
| }, |
| .probe = imx_scu_probe, |
| }; |
| builtin_platform_driver(imx_scu_driver); |
| |
| MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>"); |
| MODULE_DESCRIPTION("IMX SCU firmware protocol driver"); |
| MODULE_LICENSE("GPL v2"); |