| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Platform driver for the Synopsys DesignWare DMA Controller | |
| * | |
| * Copyright (C) 2007-2008 Atmel Corporation | |
| * Copyright (C) 2010-2011 ST Microelectronics | |
| * Copyright (C) 2013 Intel Corporation | |
| * | |
| * Some parts of this driver are derived from the original dw_dmac. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/clk.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/of.h> | |
| #include <linux/of_dma.h> | |
| #include <linux/acpi.h> | |
| #include <linux/acpi_dma.h> | |
| #include "internal.h" | |
| #define DRV_NAME "dw_dmac" | |
| static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec, | |
| struct of_dma *ofdma) | |
| { | |
| struct dw_dma *dw = ofdma->of_dma_data; | |
| struct dw_dma_slave slave = { | |
| .dma_dev = dw->dma.dev, | |
| }; | |
| dma_cap_mask_t cap; | |
| if (dma_spec->args_count != 3) | |
| return NULL; | |
| slave.src_id = dma_spec->args[0]; | |
| slave.dst_id = dma_spec->args[0]; | |
| slave.m_master = dma_spec->args[1]; | |
| slave.p_master = dma_spec->args[2]; | |
| if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS || | |
| slave.dst_id >= DW_DMA_MAX_NR_REQUESTS || | |
| slave.m_master >= dw->pdata->nr_masters || | |
| slave.p_master >= dw->pdata->nr_masters)) | |
| return NULL; | |
| dma_cap_zero(cap); | |
| dma_cap_set(DMA_SLAVE, cap); | |
| /* TODO: there should be a simpler way to do this */ | |
| return dma_request_channel(cap, dw_dma_filter, &slave); | |
| } | |
| #ifdef CONFIG_ACPI | |
| static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param) | |
| { | |
| struct acpi_dma_spec *dma_spec = param; | |
| struct dw_dma_slave slave = { | |
| .dma_dev = dma_spec->dev, | |
| .src_id = dma_spec->slave_id, | |
| .dst_id = dma_spec->slave_id, | |
| .m_master = 0, | |
| .p_master = 1, | |
| }; | |
| return dw_dma_filter(chan, &slave); | |
| } | |
| static void dw_dma_acpi_controller_register(struct dw_dma *dw) | |
| { | |
| struct device *dev = dw->dma.dev; | |
| struct acpi_dma_filter_info *info; | |
| int ret; | |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return; | |
| dma_cap_zero(info->dma_cap); | |
| dma_cap_set(DMA_SLAVE, info->dma_cap); | |
| info->filter_fn = dw_dma_acpi_filter; | |
| ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate, | |
| info); | |
| if (ret) | |
| dev_err(dev, "could not register acpi_dma_controller\n"); | |
| } | |
| #else /* !CONFIG_ACPI */ | |
| static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {} | |
| #endif /* !CONFIG_ACPI */ | |
| #ifdef CONFIG_OF | |
| static struct dw_dma_platform_data * | |
| dw_dma_parse_dt(struct platform_device *pdev) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct dw_dma_platform_data *pdata; | |
| u32 tmp, arr[DW_DMA_MAX_NR_MASTERS], mb[DW_DMA_MAX_NR_CHANNELS]; | |
| u32 nr_masters; | |
| u32 nr_channels; | |
| if (!np) { | |
| dev_err(&pdev->dev, "Missing DT data\n"); | |
| return NULL; | |
| } | |
| if (of_property_read_u32(np, "dma-masters", &nr_masters)) | |
| return NULL; | |
| if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS) | |
| return NULL; | |
| if (of_property_read_u32(np, "dma-channels", &nr_channels)) | |
| return NULL; | |
| if (nr_channels > DW_DMA_MAX_NR_CHANNELS) | |
| return NULL; | |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return NULL; | |
| pdata->nr_masters = nr_masters; | |
| pdata->nr_channels = nr_channels; | |
| if (!of_property_read_u32(np, "chan_allocation_order", &tmp)) | |
| pdata->chan_allocation_order = (unsigned char)tmp; | |
| if (!of_property_read_u32(np, "chan_priority", &tmp)) | |
| pdata->chan_priority = tmp; | |
| if (!of_property_read_u32(np, "block_size", &tmp)) | |
| pdata->block_size = tmp; | |
| if (!of_property_read_u32_array(np, "data-width", arr, nr_masters)) { | |
| for (tmp = 0; tmp < nr_masters; tmp++) | |
| pdata->data_width[tmp] = arr[tmp]; | |
| } else if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) { | |
| for (tmp = 0; tmp < nr_masters; tmp++) | |
| pdata->data_width[tmp] = BIT(arr[tmp] & 0x07); | |
| } | |
| if (!of_property_read_u32_array(np, "multi-block", mb, nr_channels)) { | |
| for (tmp = 0; tmp < nr_channels; tmp++) | |
| pdata->multi_block[tmp] = mb[tmp]; | |
| } else { | |
| for (tmp = 0; tmp < nr_channels; tmp++) | |
| pdata->multi_block[tmp] = 1; | |
| } | |
| if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) { | |
| if (tmp > CHAN_PROTCTL_MASK) | |
| return NULL; | |
| pdata->protctl = tmp; | |
| } | |
| return pdata; | |
| } | |
| #else | |
| static inline struct dw_dma_platform_data * | |
| dw_dma_parse_dt(struct platform_device *pdev) | |
| { | |
| return NULL; | |
| } | |
| #endif | |
| static int dw_probe(struct platform_device *pdev) | |
| { | |
| struct dw_dma_chip *chip; | |
| struct device *dev = &pdev->dev; | |
| struct resource *mem; | |
| const struct dw_dma_platform_data *pdata; | |
| int err; | |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| chip->irq = platform_get_irq(pdev, 0); | |
| if (chip->irq < 0) | |
| return chip->irq; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| chip->regs = devm_ioremap_resource(dev, mem); | |
| if (IS_ERR(chip->regs)) | |
| return PTR_ERR(chip->regs); | |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (err) | |
| return err; | |
| pdata = dev_get_platdata(dev); | |
| if (!pdata) | |
| pdata = dw_dma_parse_dt(pdev); | |
| chip->dev = dev; | |
| chip->id = pdev->id; | |
| chip->pdata = pdata; | |
| chip->clk = devm_clk_get(chip->dev, "hclk"); | |
| if (IS_ERR(chip->clk)) | |
| return PTR_ERR(chip->clk); | |
| err = clk_prepare_enable(chip->clk); | |
| if (err) | |
| return err; | |
| pm_runtime_enable(&pdev->dev); | |
| err = dw_dma_probe(chip); | |
| if (err) | |
| goto err_dw_dma_probe; | |
| platform_set_drvdata(pdev, chip); | |
| if (pdev->dev.of_node) { | |
| err = of_dma_controller_register(pdev->dev.of_node, | |
| dw_dma_of_xlate, chip->dw); | |
| if (err) | |
| dev_err(&pdev->dev, | |
| "could not register of_dma_controller\n"); | |
| } | |
| if (ACPI_HANDLE(&pdev->dev)) | |
| dw_dma_acpi_controller_register(chip->dw); | |
| return 0; | |
| err_dw_dma_probe: | |
| pm_runtime_disable(&pdev->dev); | |
| clk_disable_unprepare(chip->clk); | |
| return err; | |
| } | |
| static int dw_remove(struct platform_device *pdev) | |
| { | |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); | |
| if (pdev->dev.of_node) | |
| of_dma_controller_free(pdev->dev.of_node); | |
| dw_dma_remove(chip); | |
| pm_runtime_disable(&pdev->dev); | |
| clk_disable_unprepare(chip->clk); | |
| return 0; | |
| } | |
| static void dw_shutdown(struct platform_device *pdev) | |
| { | |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); | |
| /* | |
| * We have to call do_dw_dma_disable() to stop any ongoing transfer. On | |
| * some platforms we can't do that since DMA device is powered off. | |
| * Moreover we have no possibility to check if the platform is affected | |
| * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() | |
| * unconditionally. On the other hand we can't use | |
| * pm_runtime_suspended() because runtime PM framework is not fully | |
| * used by the driver. | |
| */ | |
| pm_runtime_get_sync(chip->dev); | |
| do_dw_dma_disable(chip); | |
| pm_runtime_put_sync_suspend(chip->dev); | |
| clk_disable_unprepare(chip->clk); | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id dw_dma_of_id_table[] = { | |
| { .compatible = "snps,dma-spear1340" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); | |
| #endif | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id dw_dma_acpi_id_table[] = { | |
| { "INTL9C60", 0 }, | |
| { "80862286", 0 }, | |
| { "808622C0", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); | |
| #endif | |
| #ifdef CONFIG_PM_SLEEP | |
| static int dw_suspend_late(struct device *dev) | |
| { | |
| struct dw_dma_chip *chip = dev_get_drvdata(dev); | |
| do_dw_dma_disable(chip); | |
| clk_disable_unprepare(chip->clk); | |
| return 0; | |
| } | |
| static int dw_resume_early(struct device *dev) | |
| { | |
| struct dw_dma_chip *chip = dev_get_drvdata(dev); | |
| int ret; | |
| ret = clk_prepare_enable(chip->clk); | |
| if (ret) | |
| return ret; | |
| return do_dw_dma_enable(chip); | |
| } | |
| #endif /* CONFIG_PM_SLEEP */ | |
| static const struct dev_pm_ops dw_dev_pm_ops = { | |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early) | |
| }; | |
| static struct platform_driver dw_driver = { | |
| .probe = dw_probe, | |
| .remove = dw_remove, | |
| .shutdown = dw_shutdown, | |
| .driver = { | |
| .name = DRV_NAME, | |
| .pm = &dw_dev_pm_ops, | |
| .of_match_table = of_match_ptr(dw_dma_of_id_table), | |
| .acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table), | |
| }, | |
| }; | |
| static int __init dw_init(void) | |
| { | |
| return platform_driver_register(&dw_driver); | |
| } | |
| subsys_initcall(dw_init); | |
| static void __exit dw_exit(void) | |
| { | |
| platform_driver_unregister(&dw_driver); | |
| } | |
| module_exit(dw_exit); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller platform driver"); | |
| MODULE_ALIAS("platform:" DRV_NAME); |