| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Qualcomm MSM vibrator driver | |
| * | |
| * Copyright (c) 2018 Brian Masney <masneyb@onstation.org> | |
| * | |
| * Based on qcom,pwm-vibrator.c from: | |
| * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca> | |
| * | |
| * Based on msm_pwm_vibrator.c from downstream Android sources: | |
| * Copyright (C) 2009-2014 LGE, Inc. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/input.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #define REG_CMD_RCGR 0x00 | |
| #define REG_CFG_RCGR 0x04 | |
| #define REG_M 0x08 | |
| #define REG_N 0x0C | |
| #define REG_D 0x10 | |
| #define REG_CBCR 0x24 | |
| #define MMSS_CC_M_DEFAULT 1 | |
| struct msm_vibrator { | |
| struct input_dev *input; | |
| struct mutex mutex; | |
| struct work_struct worker; | |
| void __iomem *base; | |
| struct regulator *vcc; | |
| struct clk *clk; | |
| struct gpio_desc *enable_gpio; | |
| u16 magnitude; | |
| bool enabled; | |
| }; | |
| static void msm_vibrator_write(struct msm_vibrator *vibrator, int offset, | |
| u32 value) | |
| { | |
| writel(value, vibrator->base + offset); | |
| } | |
| static int msm_vibrator_start(struct msm_vibrator *vibrator) | |
| { | |
| int d_reg_val, ret = 0; | |
| mutex_lock(&vibrator->mutex); | |
| if (!vibrator->enabled) { | |
| ret = clk_set_rate(vibrator->clk, 24000); | |
| if (ret) { | |
| dev_err(&vibrator->input->dev, | |
| "Failed to set clock rate: %d\n", ret); | |
| goto unlock; | |
| } | |
| ret = clk_prepare_enable(vibrator->clk); | |
| if (ret) { | |
| dev_err(&vibrator->input->dev, | |
| "Failed to enable clock: %d\n", ret); | |
| goto unlock; | |
| } | |
| ret = regulator_enable(vibrator->vcc); | |
| if (ret) { | |
| dev_err(&vibrator->input->dev, | |
| "Failed to enable regulator: %d\n", ret); | |
| clk_disable(vibrator->clk); | |
| goto unlock; | |
| } | |
| gpiod_set_value_cansleep(vibrator->enable_gpio, 1); | |
| vibrator->enabled = true; | |
| } | |
| d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff); | |
| msm_vibrator_write(vibrator, REG_CFG_RCGR, | |
| (2 << 12) | /* dual edge mode */ | |
| (0 << 8) | /* cxo */ | |
| (7 << 0)); | |
| msm_vibrator_write(vibrator, REG_M, 1); | |
| msm_vibrator_write(vibrator, REG_N, 128); | |
| msm_vibrator_write(vibrator, REG_D, d_reg_val); | |
| msm_vibrator_write(vibrator, REG_CMD_RCGR, 1); | |
| msm_vibrator_write(vibrator, REG_CBCR, 1); | |
| unlock: | |
| mutex_unlock(&vibrator->mutex); | |
| return ret; | |
| } | |
| static void msm_vibrator_stop(struct msm_vibrator *vibrator) | |
| { | |
| mutex_lock(&vibrator->mutex); | |
| if (vibrator->enabled) { | |
| gpiod_set_value_cansleep(vibrator->enable_gpio, 0); | |
| regulator_disable(vibrator->vcc); | |
| clk_disable(vibrator->clk); | |
| vibrator->enabled = false; | |
| } | |
| mutex_unlock(&vibrator->mutex); | |
| } | |
| static void msm_vibrator_worker(struct work_struct *work) | |
| { | |
| struct msm_vibrator *vibrator = container_of(work, | |
| struct msm_vibrator, | |
| worker); | |
| if (vibrator->magnitude) | |
| msm_vibrator_start(vibrator); | |
| else | |
| msm_vibrator_stop(vibrator); | |
| } | |
| static int msm_vibrator_play_effect(struct input_dev *dev, void *data, | |
| struct ff_effect *effect) | |
| { | |
| struct msm_vibrator *vibrator = input_get_drvdata(dev); | |
| mutex_lock(&vibrator->mutex); | |
| if (effect->u.rumble.strong_magnitude > 0) | |
| vibrator->magnitude = effect->u.rumble.strong_magnitude; | |
| else | |
| vibrator->magnitude = effect->u.rumble.weak_magnitude; | |
| mutex_unlock(&vibrator->mutex); | |
| schedule_work(&vibrator->worker); | |
| return 0; | |
| } | |
| static void msm_vibrator_close(struct input_dev *input) | |
| { | |
| struct msm_vibrator *vibrator = input_get_drvdata(input); | |
| cancel_work_sync(&vibrator->worker); | |
| msm_vibrator_stop(vibrator); | |
| } | |
| static int msm_vibrator_probe(struct platform_device *pdev) | |
| { | |
| struct msm_vibrator *vibrator; | |
| struct resource *res; | |
| int ret; | |
| vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL); | |
| if (!vibrator) | |
| return -ENOMEM; | |
| vibrator->input = devm_input_allocate_device(&pdev->dev); | |
| if (!vibrator->input) | |
| return -ENOMEM; | |
| vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); | |
| if (IS_ERR(vibrator->vcc)) { | |
| if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, "Failed to get regulator: %ld\n", | |
| PTR_ERR(vibrator->vcc)); | |
| return PTR_ERR(vibrator->vcc); | |
| } | |
| vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(vibrator->enable_gpio)) { | |
| if (PTR_ERR(vibrator->enable_gpio) != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n", | |
| PTR_ERR(vibrator->enable_gpio)); | |
| return PTR_ERR(vibrator->enable_gpio); | |
| } | |
| vibrator->clk = devm_clk_get(&pdev->dev, "pwm"); | |
| if (IS_ERR(vibrator->clk)) { | |
| if (PTR_ERR(vibrator->clk) != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n", | |
| PTR_ERR(vibrator->clk)); | |
| return PTR_ERR(vibrator->clk); | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "Failed to get platform resource\n"); | |
| return -ENODEV; | |
| } | |
| vibrator->base = devm_ioremap(&pdev->dev, res->start, | |
| resource_size(res)); | |
| if (!vibrator->base) { | |
| dev_err(&pdev->dev, "Failed to iomap resource.\n"); | |
| return -ENOMEM; | |
| } | |
| vibrator->enabled = false; | |
| mutex_init(&vibrator->mutex); | |
| INIT_WORK(&vibrator->worker, msm_vibrator_worker); | |
| vibrator->input->name = "msm-vibrator"; | |
| vibrator->input->id.bustype = BUS_HOST; | |
| vibrator->input->close = msm_vibrator_close; | |
| input_set_drvdata(vibrator->input, vibrator); | |
| input_set_capability(vibrator->input, EV_FF, FF_RUMBLE); | |
| ret = input_ff_create_memless(vibrator->input, NULL, | |
| msm_vibrator_play_effect); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to create ff memless: %d", ret); | |
| return ret; | |
| } | |
| ret = input_register_device(vibrator->input); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to register input device: %d", ret); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, vibrator); | |
| return 0; | |
| } | |
| static int __maybe_unused msm_vibrator_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct msm_vibrator *vibrator = platform_get_drvdata(pdev); | |
| cancel_work_sync(&vibrator->worker); | |
| if (vibrator->enabled) | |
| msm_vibrator_stop(vibrator); | |
| return 0; | |
| } | |
| static int __maybe_unused msm_vibrator_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct msm_vibrator *vibrator = platform_get_drvdata(pdev); | |
| if (vibrator->enabled) | |
| msm_vibrator_start(vibrator); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend, | |
| msm_vibrator_resume); | |
| static const struct of_device_id msm_vibrator_of_match[] = { | |
| { .compatible = "qcom,msm8226-vibrator" }, | |
| { .compatible = "qcom,msm8974-vibrator" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, msm_vibrator_of_match); | |
| static struct platform_driver msm_vibrator_driver = { | |
| .probe = msm_vibrator_probe, | |
| .driver = { | |
| .name = "msm-vibrator", | |
| .pm = &msm_vibrator_pm_ops, | |
| .of_match_table = of_match_ptr(msm_vibrator_of_match), | |
| }, | |
| }; | |
| module_platform_driver(msm_vibrator_driver); | |
| MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>"); | |
| MODULE_DESCRIPTION("Qualcomm MSM vibrator driver"); | |
| MODULE_LICENSE("GPL"); |