| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Driver for a keypad w/16 buttons connected to a PCF8574 I2C I/O expander | |
| * | |
| * Copyright 2005-2008 Analog Devices Inc. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/input.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #define DRV_NAME "pcf8574_keypad" | |
| static const unsigned char pcf8574_kp_btncode[] = { | |
| [0] = KEY_RESERVED, | |
| [1] = KEY_ENTER, | |
| [2] = KEY_BACKSLASH, | |
| [3] = KEY_0, | |
| [4] = KEY_RIGHTBRACE, | |
| [5] = KEY_C, | |
| [6] = KEY_9, | |
| [7] = KEY_8, | |
| [8] = KEY_7, | |
| [9] = KEY_B, | |
| [10] = KEY_6, | |
| [11] = KEY_5, | |
| [12] = KEY_4, | |
| [13] = KEY_A, | |
| [14] = KEY_3, | |
| [15] = KEY_2, | |
| [16] = KEY_1 | |
| }; | |
| struct kp_data { | |
| unsigned short btncode[ARRAY_SIZE(pcf8574_kp_btncode)]; | |
| struct input_dev *idev; | |
| struct i2c_client *client; | |
| char name[64]; | |
| char phys[32]; | |
| unsigned char laststate; | |
| }; | |
| static short read_state(struct kp_data *lp) | |
| { | |
| unsigned char x, y, a, b; | |
| i2c_smbus_write_byte(lp->client, 240); | |
| x = 0xF & (~(i2c_smbus_read_byte(lp->client) >> 4)); | |
| i2c_smbus_write_byte(lp->client, 15); | |
| y = 0xF & (~i2c_smbus_read_byte(lp->client)); | |
| for (a = 0; x > 0; a++) | |
| x = x >> 1; | |
| for (b = 0; y > 0; b++) | |
| y = y >> 1; | |
| return ((a - 1) * 4) + b; | |
| } | |
| static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id) | |
| { | |
| struct kp_data *lp = dev_id; | |
| unsigned char nextstate = read_state(lp); | |
| if (lp->laststate != nextstate) { | |
| int key_down = nextstate < ARRAY_SIZE(lp->btncode); | |
| unsigned short keycode = key_down ? | |
| lp->btncode[nextstate] : lp->btncode[lp->laststate]; | |
| input_report_key(lp->idev, keycode, key_down); | |
| input_sync(lp->idev); | |
| lp->laststate = nextstate; | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_id *id) | |
| { | |
| int i, ret; | |
| struct input_dev *idev; | |
| struct kp_data *lp; | |
| if (i2c_smbus_write_byte(client, 240) < 0) { | |
| dev_err(&client->dev, "probe: write fail\n"); | |
| return -ENODEV; | |
| } | |
| lp = kzalloc(sizeof(*lp), GFP_KERNEL); | |
| if (!lp) | |
| return -ENOMEM; | |
| idev = input_allocate_device(); | |
| if (!idev) { | |
| dev_err(&client->dev, "Can't allocate input device\n"); | |
| ret = -ENOMEM; | |
| goto fail_allocate; | |
| } | |
| lp->idev = idev; | |
| lp->client = client; | |
| idev->evbit[0] = BIT_MASK(EV_KEY); | |
| idev->keycode = lp->btncode; | |
| idev->keycodesize = sizeof(lp->btncode[0]); | |
| idev->keycodemax = ARRAY_SIZE(lp->btncode); | |
| for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) { | |
| if (lp->btncode[i] <= KEY_MAX) { | |
| lp->btncode[i] = pcf8574_kp_btncode[i]; | |
| __set_bit(lp->btncode[i], idev->keybit); | |
| } | |
| } | |
| __clear_bit(KEY_RESERVED, idev->keybit); | |
| sprintf(lp->name, DRV_NAME); | |
| sprintf(lp->phys, "kp_data/input0"); | |
| idev->name = lp->name; | |
| idev->phys = lp->phys; | |
| idev->id.bustype = BUS_I2C; | |
| idev->id.vendor = 0x0001; | |
| idev->id.product = 0x0001; | |
| idev->id.version = 0x0100; | |
| lp->laststate = read_state(lp); | |
| ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler, | |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, | |
| DRV_NAME, lp); | |
| if (ret) { | |
| dev_err(&client->dev, "IRQ %d is not free\n", client->irq); | |
| goto fail_free_device; | |
| } | |
| ret = input_register_device(idev); | |
| if (ret) { | |
| dev_err(&client->dev, "input_register_device() failed\n"); | |
| goto fail_free_irq; | |
| } | |
| i2c_set_clientdata(client, lp); | |
| return 0; | |
| fail_free_irq: | |
| free_irq(client->irq, lp); | |
| fail_free_device: | |
| input_free_device(idev); | |
| fail_allocate: | |
| kfree(lp); | |
| return ret; | |
| } | |
| static int pcf8574_kp_remove(struct i2c_client *client) | |
| { | |
| struct kp_data *lp = i2c_get_clientdata(client); | |
| free_irq(client->irq, lp); | |
| input_unregister_device(lp->idev); | |
| kfree(lp); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int pcf8574_kp_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| enable_irq(client->irq); | |
| return 0; | |
| } | |
| static int pcf8574_kp_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| disable_irq(client->irq); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops pcf8574_kp_pm_ops = { | |
| .suspend = pcf8574_kp_suspend, | |
| .resume = pcf8574_kp_resume, | |
| }; | |
| #else | |
| # define pcf8574_kp_resume NULL | |
| # define pcf8574_kp_suspend NULL | |
| #endif | |
| static const struct i2c_device_id pcf8574_kp_id[] = { | |
| { DRV_NAME, 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id); | |
| static struct i2c_driver pcf8574_kp_driver = { | |
| .driver = { | |
| .name = DRV_NAME, | |
| #ifdef CONFIG_PM | |
| .pm = &pcf8574_kp_pm_ops, | |
| #endif | |
| }, | |
| .probe = pcf8574_kp_probe, | |
| .remove = pcf8574_kp_remove, | |
| .id_table = pcf8574_kp_id, | |
| }; | |
| module_i2c_driver(pcf8574_kp_driver); | |
| MODULE_AUTHOR("Michael Hennerich"); | |
| MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574"); | |
| MODULE_LICENSE("GPL"); |