| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * GPIO based serio bus driver for bit banging the PS/2 protocol | |
| * | |
| * Author: Danilo Krummrich <danilokrummrich@dk-develop.de> | |
| */ | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/serio.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/completion.h> | |
| #include <linux/mutex.h> | |
| #include <linux/preempt.h> | |
| #include <linux/property.h> | |
| #include <linux/of.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/delay.h> | |
| #define DRIVER_NAME "ps2-gpio" | |
| #define PS2_MODE_RX 0 | |
| #define PS2_MODE_TX 1 | |
| #define PS2_START_BIT 0 | |
| #define PS2_DATA_BIT0 1 | |
| #define PS2_DATA_BIT1 2 | |
| #define PS2_DATA_BIT2 3 | |
| #define PS2_DATA_BIT3 4 | |
| #define PS2_DATA_BIT4 5 | |
| #define PS2_DATA_BIT5 6 | |
| #define PS2_DATA_BIT6 7 | |
| #define PS2_DATA_BIT7 8 | |
| #define PS2_PARITY_BIT 9 | |
| #define PS2_STOP_BIT 10 | |
| #define PS2_TX_TIMEOUT 11 | |
| #define PS2_ACK_BIT 12 | |
| #define PS2_DEV_RET_ACK 0xfa | |
| #define PS2_DEV_RET_NACK 0xfe | |
| #define PS2_CMD_RESEND 0xfe | |
| struct ps2_gpio_data { | |
| struct device *dev; | |
| struct serio *serio; | |
| unsigned char mode; | |
| struct gpio_desc *gpio_clk; | |
| struct gpio_desc *gpio_data; | |
| bool write_enable; | |
| int irq; | |
| unsigned char rx_cnt; | |
| unsigned char rx_byte; | |
| unsigned char tx_cnt; | |
| unsigned char tx_byte; | |
| struct completion tx_done; | |
| struct mutex tx_mutex; | |
| struct delayed_work tx_work; | |
| }; | |
| static int ps2_gpio_open(struct serio *serio) | |
| { | |
| struct ps2_gpio_data *drvdata = serio->port_data; | |
| enable_irq(drvdata->irq); | |
| return 0; | |
| } | |
| static void ps2_gpio_close(struct serio *serio) | |
| { | |
| struct ps2_gpio_data *drvdata = serio->port_data; | |
| flush_delayed_work(&drvdata->tx_work); | |
| disable_irq(drvdata->irq); | |
| } | |
| static int __ps2_gpio_write(struct serio *serio, unsigned char val) | |
| { | |
| struct ps2_gpio_data *drvdata = serio->port_data; | |
| disable_irq_nosync(drvdata->irq); | |
| gpiod_direction_output(drvdata->gpio_clk, 0); | |
| drvdata->mode = PS2_MODE_TX; | |
| drvdata->tx_byte = val; | |
| schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); | |
| return 0; | |
| } | |
| static int ps2_gpio_write(struct serio *serio, unsigned char val) | |
| { | |
| struct ps2_gpio_data *drvdata = serio->port_data; | |
| int ret = 0; | |
| if (in_task()) { | |
| mutex_lock(&drvdata->tx_mutex); | |
| __ps2_gpio_write(serio, val); | |
| if (!wait_for_completion_timeout(&drvdata->tx_done, | |
| msecs_to_jiffies(10000))) | |
| ret = SERIO_TIMEOUT; | |
| mutex_unlock(&drvdata->tx_mutex); | |
| } else { | |
| __ps2_gpio_write(serio, val); | |
| } | |
| return ret; | |
| } | |
| static void ps2_gpio_tx_work_fn(struct work_struct *work) | |
| { | |
| struct delayed_work *dwork = to_delayed_work(work); | |
| struct ps2_gpio_data *drvdata = container_of(dwork, | |
| struct ps2_gpio_data, | |
| tx_work); | |
| enable_irq(drvdata->irq); | |
| gpiod_direction_output(drvdata->gpio_data, 0); | |
| gpiod_direction_input(drvdata->gpio_clk); | |
| } | |
| static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) | |
| { | |
| unsigned char byte, cnt; | |
| int data; | |
| int rxflags = 0; | |
| static unsigned long old_jiffies; | |
| byte = drvdata->rx_byte; | |
| cnt = drvdata->rx_cnt; | |
| if (old_jiffies == 0) | |
| old_jiffies = jiffies; | |
| if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { | |
| dev_err(drvdata->dev, | |
| "RX: timeout, probably we missed an interrupt\n"); | |
| goto err; | |
| } | |
| old_jiffies = jiffies; | |
| data = gpiod_get_value(drvdata->gpio_data); | |
| if (unlikely(data < 0)) { | |
| dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n", | |
| data); | |
| goto err; | |
| } | |
| switch (cnt) { | |
| case PS2_START_BIT: | |
| /* start bit should be low */ | |
| if (unlikely(data)) { | |
| dev_err(drvdata->dev, "RX: start bit should be low\n"); | |
| goto err; | |
| } | |
| break; | |
| case PS2_DATA_BIT0: | |
| case PS2_DATA_BIT1: | |
| case PS2_DATA_BIT2: | |
| case PS2_DATA_BIT3: | |
| case PS2_DATA_BIT4: | |
| case PS2_DATA_BIT5: | |
| case PS2_DATA_BIT6: | |
| case PS2_DATA_BIT7: | |
| /* processing data bits */ | |
| if (data) | |
| byte |= (data << (cnt - 1)); | |
| break; | |
| case PS2_PARITY_BIT: | |
| /* check odd parity */ | |
| if (!((hweight8(byte) & 1) ^ data)) { | |
| rxflags |= SERIO_PARITY; | |
| dev_warn(drvdata->dev, "RX: parity error\n"); | |
| if (!drvdata->write_enable) | |
| goto err; | |
| } | |
| /* Do not send spurious ACK's and NACK's when write fn is | |
| * not provided. | |
| */ | |
| if (!drvdata->write_enable) { | |
| if (byte == PS2_DEV_RET_NACK) | |
| goto err; | |
| else if (byte == PS2_DEV_RET_ACK) | |
| break; | |
| } | |
| /* Let's send the data without waiting for the stop bit to be | |
| * sent. It may happen that we miss the stop bit. When this | |
| * happens we have no way to recover from this, certainly | |
| * missing the parity bit would be recognized when processing | |
| * the stop bit. When missing both, data is lost. | |
| */ | |
| serio_interrupt(drvdata->serio, byte, rxflags); | |
| dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); | |
| break; | |
| case PS2_STOP_BIT: | |
| /* stop bit should be high */ | |
| if (unlikely(!data)) { | |
| dev_err(drvdata->dev, "RX: stop bit should be high\n"); | |
| goto err; | |
| } | |
| cnt = byte = 0; | |
| old_jiffies = 0; | |
| goto end; /* success */ | |
| default: | |
| dev_err(drvdata->dev, "RX: got out of sync with the device\n"); | |
| goto err; | |
| } | |
| cnt++; | |
| goto end; /* success */ | |
| err: | |
| cnt = byte = 0; | |
| old_jiffies = 0; | |
| __ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); | |
| end: | |
| drvdata->rx_cnt = cnt; | |
| drvdata->rx_byte = byte; | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) | |
| { | |
| unsigned char byte, cnt; | |
| int data; | |
| static unsigned long old_jiffies; | |
| cnt = drvdata->tx_cnt; | |
| byte = drvdata->tx_byte; | |
| if (old_jiffies == 0) | |
| old_jiffies = jiffies; | |
| if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { | |
| dev_err(drvdata->dev, | |
| "TX: timeout, probably we missed an interrupt\n"); | |
| goto err; | |
| } | |
| old_jiffies = jiffies; | |
| switch (cnt) { | |
| case PS2_START_BIT: | |
| /* should never happen */ | |
| dev_err(drvdata->dev, | |
| "TX: start bit should have been sent already\n"); | |
| goto err; | |
| case PS2_DATA_BIT0: | |
| case PS2_DATA_BIT1: | |
| case PS2_DATA_BIT2: | |
| case PS2_DATA_BIT3: | |
| case PS2_DATA_BIT4: | |
| case PS2_DATA_BIT5: | |
| case PS2_DATA_BIT6: | |
| case PS2_DATA_BIT7: | |
| data = byte & BIT(cnt - 1); | |
| gpiod_set_value(drvdata->gpio_data, data); | |
| break; | |
| case PS2_PARITY_BIT: | |
| /* do odd parity */ | |
| data = !(hweight8(byte) & 1); | |
| gpiod_set_value(drvdata->gpio_data, data); | |
| break; | |
| case PS2_STOP_BIT: | |
| /* release data line to generate stop bit */ | |
| gpiod_direction_input(drvdata->gpio_data); | |
| break; | |
| case PS2_TX_TIMEOUT: | |
| /* Devices generate one extra clock pulse before sending the | |
| * acknowledgment. | |
| */ | |
| break; | |
| case PS2_ACK_BIT: | |
| gpiod_direction_input(drvdata->gpio_data); | |
| data = gpiod_get_value(drvdata->gpio_data); | |
| if (data) { | |
| dev_warn(drvdata->dev, "TX: received NACK, retry\n"); | |
| goto err; | |
| } | |
| drvdata->mode = PS2_MODE_RX; | |
| complete(&drvdata->tx_done); | |
| cnt = 1; | |
| old_jiffies = 0; | |
| goto end; /* success */ | |
| default: | |
| /* Probably we missed the stop bit. Therefore we release data | |
| * line and try again. | |
| */ | |
| gpiod_direction_input(drvdata->gpio_data); | |
| dev_err(drvdata->dev, "TX: got out of sync with the device\n"); | |
| goto err; | |
| } | |
| cnt++; | |
| goto end; /* success */ | |
| err: | |
| cnt = 1; | |
| old_jiffies = 0; | |
| gpiod_direction_input(drvdata->gpio_data); | |
| __ps2_gpio_write(drvdata->serio, drvdata->tx_byte); | |
| end: | |
| drvdata->tx_cnt = cnt; | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) | |
| { | |
| struct ps2_gpio_data *drvdata = dev_id; | |
| return drvdata->mode ? ps2_gpio_irq_tx(drvdata) : | |
| ps2_gpio_irq_rx(drvdata); | |
| } | |
| static int ps2_gpio_get_props(struct device *dev, | |
| struct ps2_gpio_data *drvdata) | |
| { | |
| drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); | |
| if (IS_ERR(drvdata->gpio_data)) { | |
| dev_err(dev, "failed to request data gpio: %ld", | |
| PTR_ERR(drvdata->gpio_data)); | |
| return PTR_ERR(drvdata->gpio_data); | |
| } | |
| drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); | |
| if (IS_ERR(drvdata->gpio_clk)) { | |
| dev_err(dev, "failed to request clock gpio: %ld", | |
| PTR_ERR(drvdata->gpio_clk)); | |
| return PTR_ERR(drvdata->gpio_clk); | |
| } | |
| drvdata->write_enable = device_property_read_bool(dev, | |
| "write-enable"); | |
| return 0; | |
| } | |
| static int ps2_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct ps2_gpio_data *drvdata; | |
| struct serio *serio; | |
| struct device *dev = &pdev->dev; | |
| int error; | |
| drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL); | |
| serio = kzalloc(sizeof(struct serio), GFP_KERNEL); | |
| if (!drvdata || !serio) { | |
| error = -ENOMEM; | |
| goto err_free_serio; | |
| } | |
| error = ps2_gpio_get_props(dev, drvdata); | |
| if (error) | |
| goto err_free_serio; | |
| if (gpiod_cansleep(drvdata->gpio_data) || | |
| gpiod_cansleep(drvdata->gpio_clk)) { | |
| dev_err(dev, "GPIO data or clk are connected via slow bus\n"); | |
| error = -EINVAL; | |
| goto err_free_serio; | |
| } | |
| drvdata->irq = platform_get_irq(pdev, 0); | |
| if (drvdata->irq < 0) { | |
| dev_err(dev, "failed to get irq from platform resource: %d\n", | |
| drvdata->irq); | |
| error = drvdata->irq; | |
| goto err_free_serio; | |
| } | |
| error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, | |
| IRQF_NO_THREAD, DRIVER_NAME, drvdata); | |
| if (error) { | |
| dev_err(dev, "failed to request irq %d: %d\n", | |
| drvdata->irq, error); | |
| goto err_free_serio; | |
| } | |
| /* Keep irq disabled until serio->open is called. */ | |
| disable_irq(drvdata->irq); | |
| serio->id.type = SERIO_8042; | |
| serio->open = ps2_gpio_open; | |
| serio->close = ps2_gpio_close; | |
| /* Write can be enabled in platform/dt data, but possibly it will not | |
| * work because of the tough timings. | |
| */ | |
| serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; | |
| serio->port_data = drvdata; | |
| serio->dev.parent = dev; | |
| strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); | |
| strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); | |
| drvdata->serio = serio; | |
| drvdata->dev = dev; | |
| drvdata->mode = PS2_MODE_RX; | |
| /* Tx count always starts at 1, as the start bit is sent implicitly by | |
| * host-to-device communication initialization. | |
| */ | |
| drvdata->tx_cnt = 1; | |
| INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); | |
| init_completion(&drvdata->tx_done); | |
| mutex_init(&drvdata->tx_mutex); | |
| serio_register_port(serio); | |
| platform_set_drvdata(pdev, drvdata); | |
| return 0; /* success */ | |
| err_free_serio: | |
| kfree(serio); | |
| return error; | |
| } | |
| static int ps2_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev); | |
| serio_unregister_port(drvdata->serio); | |
| return 0; | |
| } | |
| #if defined(CONFIG_OF) | |
| static const struct of_device_id ps2_gpio_match[] = { | |
| { .compatible = "ps2-gpio", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ps2_gpio_match); | |
| #endif | |
| static struct platform_driver ps2_gpio_driver = { | |
| .probe = ps2_gpio_probe, | |
| .remove = ps2_gpio_remove, | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .of_match_table = of_match_ptr(ps2_gpio_match), | |
| }, | |
| }; | |
| module_platform_driver(ps2_gpio_driver); | |
| MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>"); | |
| MODULE_DESCRIPTION("GPIO PS2 driver"); | |
| MODULE_LICENSE("GPL v2"); |