| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Driver for Intel MSIC | |
| * | |
| * Copyright (C) 2011, Intel Corporation | |
| * Author: Mika Westerberg <mika.westerberg@linux.intel.com> | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/io.h> | |
| #include <linux/init.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/mfd/intel_msic.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <asm/intel_scu_ipc.h> | |
| #define MSIC_VENDOR(id) ((id >> 6) & 3) | |
| #define MSIC_VERSION(id) (id & 0x3f) | |
| #define MSIC_MAJOR(id) ('A' + ((id >> 3) & 7)) | |
| #define MSIC_MINOR(id) (id & 7) | |
| /* | |
| * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE. | |
| * Since IRQ block starts from address 0x002 we need to subtract that from | |
| * the actual IRQ status register address. | |
| */ | |
| #define MSIC_IRQ_STATUS(x) (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2)) | |
| #define MSIC_IRQ_STATUS_ACCDET MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET) | |
| /* | |
| * The SCU hardware has limitation of 16 bytes per read/write buffer on | |
| * Medfield. | |
| */ | |
| #define SCU_IPC_RWBUF_LIMIT 16 | |
| /** | |
| * struct intel_msic - an MSIC MFD instance | |
| * @pdev: pointer to the platform device | |
| * @vendor: vendor ID | |
| * @version: chip version | |
| * @irq_base: base address of the mapped MSIC SRAM interrupt tree | |
| */ | |
| struct intel_msic { | |
| struct platform_device *pdev; | |
| unsigned vendor; | |
| unsigned version; | |
| void __iomem *irq_base; | |
| }; | |
| static struct resource msic_touch_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_adc_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_battery_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_gpio_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_audio_resources[] = { | |
| DEFINE_RES_IRQ_NAMED(0, "IRQ"), | |
| /* | |
| * We will pass IRQ_BASE to the driver now but this can be removed | |
| * when/if the driver starts to use intel_msic_irq_read(). | |
| */ | |
| DEFINE_RES_MEM_NAMED(MSIC_IRQ_STATUS_ACCDET, 1, "IRQ_BASE"), | |
| }; | |
| static struct resource msic_hdmi_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_thermal_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_power_btn_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| static struct resource msic_ocd_resources[] = { | |
| DEFINE_RES_IRQ(0), | |
| }; | |
| /* | |
| * Devices that are part of the MSIC and are available via firmware | |
| * populated SFI DEVS table. | |
| */ | |
| static struct mfd_cell msic_devs[] = { | |
| [INTEL_MSIC_BLOCK_TOUCH] = { | |
| .name = "msic_touch", | |
| .num_resources = ARRAY_SIZE(msic_touch_resources), | |
| .resources = msic_touch_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_ADC] = { | |
| .name = "msic_adc", | |
| .num_resources = ARRAY_SIZE(msic_adc_resources), | |
| .resources = msic_adc_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_BATTERY] = { | |
| .name = "msic_battery", | |
| .num_resources = ARRAY_SIZE(msic_battery_resources), | |
| .resources = msic_battery_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_GPIO] = { | |
| .name = "msic_gpio", | |
| .num_resources = ARRAY_SIZE(msic_gpio_resources), | |
| .resources = msic_gpio_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_AUDIO] = { | |
| .name = "msic_audio", | |
| .num_resources = ARRAY_SIZE(msic_audio_resources), | |
| .resources = msic_audio_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_HDMI] = { | |
| .name = "msic_hdmi", | |
| .num_resources = ARRAY_SIZE(msic_hdmi_resources), | |
| .resources = msic_hdmi_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_THERMAL] = { | |
| .name = "msic_thermal", | |
| .num_resources = ARRAY_SIZE(msic_thermal_resources), | |
| .resources = msic_thermal_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_POWER_BTN] = { | |
| .name = "msic_power_btn", | |
| .num_resources = ARRAY_SIZE(msic_power_btn_resources), | |
| .resources = msic_power_btn_resources, | |
| }, | |
| [INTEL_MSIC_BLOCK_OCD] = { | |
| .name = "msic_ocd", | |
| .num_resources = ARRAY_SIZE(msic_ocd_resources), | |
| .resources = msic_ocd_resources, | |
| }, | |
| }; | |
| /* | |
| * Other MSIC related devices which are not directly available via SFI DEVS | |
| * table. These can be pseudo devices, regulators etc. which are needed for | |
| * different purposes. | |
| * | |
| * These devices appear only after the MSIC driver itself is initialized so | |
| * we can guarantee that the SCU IPC interface is ready. | |
| */ | |
| static const struct mfd_cell msic_other_devs[] = { | |
| /* Audio codec in the MSIC */ | |
| { | |
| .id = -1, | |
| .name = "sn95031", | |
| }, | |
| }; | |
| /** | |
| * intel_msic_reg_read - read a single MSIC register | |
| * @reg: register to read | |
| * @val: register value is placed here | |
| * | |
| * Read a single register from MSIC. Returns %0 on success and negative | |
| * errno in case of failure. | |
| * | |
| * Function may sleep. | |
| */ | |
| int intel_msic_reg_read(unsigned short reg, u8 *val) | |
| { | |
| return intel_scu_ipc_ioread8(reg, val); | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_reg_read); | |
| /** | |
| * intel_msic_reg_write - write a single MSIC register | |
| * @reg: register to write | |
| * @val: value to write to that register | |
| * | |
| * Write a single MSIC register. Returns 0 on success and negative | |
| * errno in case of failure. | |
| * | |
| * Function may sleep. | |
| */ | |
| int intel_msic_reg_write(unsigned short reg, u8 val) | |
| { | |
| return intel_scu_ipc_iowrite8(reg, val); | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_reg_write); | |
| /** | |
| * intel_msic_reg_update - update a single MSIC register | |
| * @reg: register to update | |
| * @val: value to write to the register | |
| * @mask: specifies which of the bits are updated (%0 = don't update, | |
| * %1 = update) | |
| * | |
| * Perform an update to a register @reg. @mask is used to specify which | |
| * bits are updated. Returns %0 in case of success and negative errno in | |
| * case of failure. | |
| * | |
| * Function may sleep. | |
| */ | |
| int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask) | |
| { | |
| return intel_scu_ipc_update_register(reg, val, mask); | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_reg_update); | |
| /** | |
| * intel_msic_bulk_read - read an array of registers | |
| * @reg: array of register addresses to read | |
| * @buf: array where the read values are placed | |
| * @count: number of registers to read | |
| * | |
| * Function reads @count registers from the MSIC using addresses passed in | |
| * @reg. Read values are placed in @buf. Reads are performed atomically | |
| * wrt. MSIC. | |
| * | |
| * Returns %0 in case of success and negative errno in case of failure. | |
| * | |
| * Function may sleep. | |
| */ | |
| int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count) | |
| { | |
| if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT)) | |
| return -EINVAL; | |
| return intel_scu_ipc_readv(reg, buf, count); | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_bulk_read); | |
| /** | |
| * intel_msic_bulk_write - write an array of values to the MSIC registers | |
| * @reg: array of registers to write | |
| * @buf: values to write to each register | |
| * @count: number of registers to write | |
| * | |
| * Function writes @count registers in @buf to MSIC. Writes are performed | |
| * atomically wrt MSIC. Returns %0 in case of success and negative errno in | |
| * case of failure. | |
| * | |
| * Function may sleep. | |
| */ | |
| int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count) | |
| { | |
| if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT)) | |
| return -EINVAL; | |
| return intel_scu_ipc_writev(reg, buf, count); | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_bulk_write); | |
| /** | |
| * intel_msic_irq_read - read a register from an MSIC interrupt tree | |
| * @msic: MSIC instance | |
| * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and | |
| * %INTEL_MSIC_RESETIRQ2) | |
| * @val: value of the register is placed here | |
| * | |
| * This function can be used by an MSIC subdevice interrupt handler to read | |
| * a register value from the MSIC interrupt tree. In this way subdevice | |
| * drivers don't have to map in the interrupt tree themselves but can just | |
| * call this function instead. | |
| * | |
| * Function doesn't sleep and is callable from interrupt context. | |
| * | |
| * Returns %-EINVAL if @reg is outside of the allowed register region. | |
| */ | |
| int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val) | |
| { | |
| if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2)) | |
| return -EINVAL; | |
| *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1)); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(intel_msic_irq_read); | |
| static int intel_msic_init_devices(struct intel_msic *msic) | |
| { | |
| struct platform_device *pdev = msic->pdev; | |
| struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| int ret, i; | |
| if (pdata->gpio) { | |
| struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO]; | |
| cell->platform_data = pdata->gpio; | |
| cell->pdata_size = sizeof(*pdata->gpio); | |
| } | |
| if (pdata->ocd) { | |
| unsigned gpio = pdata->ocd->gpio; | |
| ret = devm_gpio_request_one(&pdev->dev, gpio, | |
| GPIOF_IN, "ocd_gpio"); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to register OCD GPIO\n"); | |
| return ret; | |
| } | |
| ret = gpio_to_irq(gpio); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n"); | |
| return ret; | |
| } | |
| /* Update the IRQ number for the OCD */ | |
| pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(msic_devs); i++) { | |
| if (!pdata->irq[i]) | |
| continue; | |
| ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL, | |
| pdata->irq[i], NULL); | |
| if (ret) | |
| goto fail; | |
| } | |
| ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs, | |
| ARRAY_SIZE(msic_other_devs), NULL, 0, NULL); | |
| if (ret) | |
| goto fail; | |
| return 0; | |
| fail: | |
| mfd_remove_devices(&pdev->dev); | |
| return ret; | |
| } | |
| static void intel_msic_remove_devices(struct intel_msic *msic) | |
| { | |
| struct platform_device *pdev = msic->pdev; | |
| mfd_remove_devices(&pdev->dev); | |
| } | |
| static int intel_msic_probe(struct platform_device *pdev) | |
| { | |
| struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct intel_msic *msic; | |
| struct resource *res; | |
| u8 id0, id1; | |
| int ret; | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "no platform data passed\n"); | |
| return -EINVAL; | |
| } | |
| /* First validate that we have an MSIC in place */ | |
| ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n"); | |
| return -ENXIO; | |
| } | |
| ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n"); | |
| return -ENXIO; | |
| } | |
| if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) { | |
| dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1); | |
| return -ENXIO; | |
| } | |
| msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL); | |
| if (!msic) | |
| return -ENOMEM; | |
| msic->vendor = MSIC_VENDOR(id0); | |
| msic->version = MSIC_VERSION(id0); | |
| msic->pdev = pdev; | |
| /* | |
| * Map in the MSIC interrupt tree area in SRAM. This is exposed to | |
| * the clients via intel_msic_irq_read(). | |
| */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| msic->irq_base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(msic->irq_base)) | |
| return PTR_ERR(msic->irq_base); | |
| platform_set_drvdata(pdev, msic); | |
| ret = intel_msic_init_devices(msic); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize MSIC devices\n"); | |
| return ret; | |
| } | |
| dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n", | |
| MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version), | |
| msic->vendor); | |
| return 0; | |
| } | |
| static int intel_msic_remove(struct platform_device *pdev) | |
| { | |
| struct intel_msic *msic = platform_get_drvdata(pdev); | |
| intel_msic_remove_devices(msic); | |
| return 0; | |
| } | |
| static struct platform_driver intel_msic_driver = { | |
| .probe = intel_msic_probe, | |
| .remove = intel_msic_remove, | |
| .driver = { | |
| .name = "intel_msic", | |
| }, | |
| }; | |
| builtin_platform_driver(intel_msic_driver); |