| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (c) 2014 Ezequiel Garcia | |
| * Copyright (c) 2011 Free Electrons | |
| * | |
| * Driver parameter handling strongly based on drivers/mtd/ubi/build.c | |
| * Copyright (c) International Business Machines Corp., 2006 | |
| * Copyright (c) Nokia Corporation, 2007 | |
| * Authors: Artem Bityutskiy, Frank Haverkamp | |
| */ | |
| /* | |
| * Read-only block devices on top of UBI volumes | |
| * | |
| * A simple implementation to allow a block device to be layered on top of a | |
| * UBI volume. The implementation is provided by creating a static 1-to-1 | |
| * mapping between the block device and the UBI volume. | |
| * | |
| * The addressed byte is obtained from the addressed block sector, which is | |
| * mapped linearly into the corresponding LEB: | |
| * | |
| * LEB number = addressed byte / LEB size | |
| * | |
| * This feature is compiled in the UBI core, and adds a 'block' parameter | |
| * to allow early creation of block devices on top of UBI volumes. Runtime | |
| * block creation/removal for UBI volumes is provided through two UBI ioctls: | |
| * UBI_IOCVOLCRBLK and UBI_IOCVOLRMBLK. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/mutex.h> | |
| #include <linux/slab.h> | |
| #include <linux/mtd/ubi.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/blk-mq.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/idr.h> | |
| #include <asm/div64.h> | |
| #include "ubi-media.h" | |
| #include "ubi.h" | |
| /* Maximum number of supported devices */ | |
| #define UBIBLOCK_MAX_DEVICES 32 | |
| /* Maximum length of the 'block=' parameter */ | |
| #define UBIBLOCK_PARAM_LEN 63 | |
| /* Maximum number of comma-separated items in the 'block=' parameter */ | |
| #define UBIBLOCK_PARAM_COUNT 2 | |
| struct ubiblock_param { | |
| int ubi_num; | |
| int vol_id; | |
| char name[UBIBLOCK_PARAM_LEN+1]; | |
| }; | |
| struct ubiblock_pdu { | |
| struct work_struct work; | |
| struct ubi_sgl usgl; | |
| }; | |
| /* Numbers of elements set in the @ubiblock_param array */ | |
| static int ubiblock_devs __initdata; | |
| /* MTD devices specification parameters */ | |
| static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata; | |
| struct ubiblock { | |
| struct ubi_volume_desc *desc; | |
| int ubi_num; | |
| int vol_id; | |
| int refcnt; | |
| int leb_size; | |
| struct gendisk *gd; | |
| struct request_queue *rq; | |
| struct workqueue_struct *wq; | |
| struct mutex dev_mutex; | |
| struct list_head list; | |
| struct blk_mq_tag_set tag_set; | |
| }; | |
| /* Linked list of all ubiblock instances */ | |
| static LIST_HEAD(ubiblock_devices); | |
| static DEFINE_IDR(ubiblock_minor_idr); | |
| /* Protects ubiblock_devices and ubiblock_minor_idr */ | |
| static DEFINE_MUTEX(devices_mutex); | |
| static int ubiblock_major; | |
| static int __init ubiblock_set_param(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| int i, ret; | |
| size_t len; | |
| struct ubiblock_param *param; | |
| char buf[UBIBLOCK_PARAM_LEN]; | |
| char *pbuf = &buf[0]; | |
| char *tokens[UBIBLOCK_PARAM_COUNT]; | |
| if (!val) | |
| return -EINVAL; | |
| len = strnlen(val, UBIBLOCK_PARAM_LEN); | |
| if (len == 0) { | |
| pr_warn("UBI: block: empty 'block=' parameter - ignored\n"); | |
| return 0; | |
| } | |
| if (len == UBIBLOCK_PARAM_LEN) { | |
| pr_err("UBI: block: parameter \"%s\" is too long, max. is %d\n", | |
| val, UBIBLOCK_PARAM_LEN); | |
| return -EINVAL; | |
| } | |
| strcpy(buf, val); | |
| /* Get rid of the final newline */ | |
| if (buf[len - 1] == '\n') | |
| buf[len - 1] = '\0'; | |
| for (i = 0; i < UBIBLOCK_PARAM_COUNT; i++) | |
| tokens[i] = strsep(&pbuf, ","); | |
| param = &ubiblock_param[ubiblock_devs]; | |
| if (tokens[1]) { | |
| /* Two parameters: can be 'ubi, vol_id' or 'ubi, vol_name' */ | |
| ret = kstrtoint(tokens[0], 10, ¶m->ubi_num); | |
| if (ret < 0) | |
| return -EINVAL; | |
| /* Second param can be a number or a name */ | |
| ret = kstrtoint(tokens[1], 10, ¶m->vol_id); | |
| if (ret < 0) { | |
| param->vol_id = -1; | |
| strcpy(param->name, tokens[1]); | |
| } | |
| } else { | |
| /* One parameter: must be device path */ | |
| strcpy(param->name, tokens[0]); | |
| param->ubi_num = -1; | |
| param->vol_id = -1; | |
| } | |
| ubiblock_devs++; | |
| return 0; | |
| } | |
| static const struct kernel_param_ops ubiblock_param_ops = { | |
| .set = ubiblock_set_param, | |
| }; | |
| module_param_cb(block, &ubiblock_param_ops, NULL, 0); | |
| MODULE_PARM_DESC(block, "Attach block devices to UBI volumes. Parameter format: block=<path|dev,num|dev,name>.\n" | |
| "Multiple \"block\" parameters may be specified.\n" | |
| "UBI volumes may be specified by their number, name, or path to the device node.\n" | |
| "Examples\n" | |
| "Using the UBI volume path:\n" | |
| "ubi.block=/dev/ubi0_0\n" | |
| "Using the UBI device, and the volume name:\n" | |
| "ubi.block=0,rootfs\n" | |
| "Using both UBI device number and UBI volume number:\n" | |
| "ubi.block=0,0\n"); | |
| static struct ubiblock *find_dev_nolock(int ubi_num, int vol_id) | |
| { | |
| struct ubiblock *dev; | |
| list_for_each_entry(dev, &ubiblock_devices, list) | |
| if (dev->ubi_num == ubi_num && dev->vol_id == vol_id) | |
| return dev; | |
| return NULL; | |
| } | |
| static int ubiblock_read(struct ubiblock_pdu *pdu) | |
| { | |
| int ret, leb, offset, bytes_left, to_read; | |
| u64 pos; | |
| struct request *req = blk_mq_rq_from_pdu(pdu); | |
| struct ubiblock *dev = req->q->queuedata; | |
| to_read = blk_rq_bytes(req); | |
| pos = blk_rq_pos(req) << 9; | |
| /* Get LEB:offset address to read from */ | |
| offset = do_div(pos, dev->leb_size); | |
| leb = pos; | |
| bytes_left = to_read; | |
| while (bytes_left) { | |
| /* | |
| * We can only read one LEB at a time. Therefore if the read | |
| * length is larger than one LEB size, we split the operation. | |
| */ | |
| if (offset + to_read > dev->leb_size) | |
| to_read = dev->leb_size - offset; | |
| ret = ubi_read_sg(dev->desc, leb, &pdu->usgl, offset, to_read); | |
| if (ret < 0) | |
| return ret; | |
| bytes_left -= to_read; | |
| to_read = bytes_left; | |
| leb += 1; | |
| offset = 0; | |
| } | |
| return 0; | |
| } | |
| static int ubiblock_open(struct block_device *bdev, fmode_t mode) | |
| { | |
| struct ubiblock *dev = bdev->bd_disk->private_data; | |
| int ret; | |
| mutex_lock(&dev->dev_mutex); | |
| if (dev->refcnt > 0) { | |
| /* | |
| * The volume is already open, just increase the reference | |
| * counter. | |
| */ | |
| goto out_done; | |
| } | |
| /* | |
| * We want users to be aware they should only mount us as read-only. | |
| * It's just a paranoid check, as write requests will get rejected | |
| * in any case. | |
| */ | |
| if (mode & FMODE_WRITE) { | |
| ret = -EROFS; | |
| goto out_unlock; | |
| } | |
| dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id, UBI_READONLY); | |
| if (IS_ERR(dev->desc)) { | |
| dev_err(disk_to_dev(dev->gd), "failed to open ubi volume %d_%d", | |
| dev->ubi_num, dev->vol_id); | |
| ret = PTR_ERR(dev->desc); | |
| dev->desc = NULL; | |
| goto out_unlock; | |
| } | |
| out_done: | |
| dev->refcnt++; | |
| mutex_unlock(&dev->dev_mutex); | |
| return 0; | |
| out_unlock: | |
| mutex_unlock(&dev->dev_mutex); | |
| return ret; | |
| } | |
| static void ubiblock_release(struct gendisk *gd, fmode_t mode) | |
| { | |
| struct ubiblock *dev = gd->private_data; | |
| mutex_lock(&dev->dev_mutex); | |
| dev->refcnt--; | |
| if (dev->refcnt == 0) { | |
| ubi_close_volume(dev->desc); | |
| dev->desc = NULL; | |
| } | |
| mutex_unlock(&dev->dev_mutex); | |
| } | |
| static int ubiblock_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
| { | |
| /* Some tools might require this information */ | |
| geo->heads = 1; | |
| geo->cylinders = 1; | |
| geo->sectors = get_capacity(bdev->bd_disk); | |
| geo->start = 0; | |
| return 0; | |
| } | |
| static const struct block_device_operations ubiblock_ops = { | |
| .owner = THIS_MODULE, | |
| .open = ubiblock_open, | |
| .release = ubiblock_release, | |
| .getgeo = ubiblock_getgeo, | |
| }; | |
| static void ubiblock_do_work(struct work_struct *work) | |
| { | |
| int ret; | |
| struct ubiblock_pdu *pdu = container_of(work, struct ubiblock_pdu, work); | |
| struct request *req = blk_mq_rq_from_pdu(pdu); | |
| blk_mq_start_request(req); | |
| /* | |
| * It is safe to ignore the return value of blk_rq_map_sg() because | |
| * the number of sg entries is limited to UBI_MAX_SG_COUNT | |
| * and ubi_read_sg() will check that limit. | |
| */ | |
| blk_rq_map_sg(req->q, req, pdu->usgl.sg); | |
| ret = ubiblock_read(pdu); | |
| rq_flush_dcache_pages(req); | |
| blk_mq_end_request(req, errno_to_blk_status(ret)); | |
| } | |
| static blk_status_t ubiblock_queue_rq(struct blk_mq_hw_ctx *hctx, | |
| const struct blk_mq_queue_data *bd) | |
| { | |
| struct request *req = bd->rq; | |
| struct ubiblock *dev = hctx->queue->queuedata; | |
| struct ubiblock_pdu *pdu = blk_mq_rq_to_pdu(req); | |
| switch (req_op(req)) { | |
| case REQ_OP_READ: | |
| ubi_sgl_init(&pdu->usgl); | |
| queue_work(dev->wq, &pdu->work); | |
| return BLK_STS_OK; | |
| default: | |
| return BLK_STS_IOERR; | |
| } | |
| } | |
| static int ubiblock_init_request(struct blk_mq_tag_set *set, | |
| struct request *req, unsigned int hctx_idx, | |
| unsigned int numa_node) | |
| { | |
| struct ubiblock_pdu *pdu = blk_mq_rq_to_pdu(req); | |
| sg_init_table(pdu->usgl.sg, UBI_MAX_SG_COUNT); | |
| INIT_WORK(&pdu->work, ubiblock_do_work); | |
| return 0; | |
| } | |
| static const struct blk_mq_ops ubiblock_mq_ops = { | |
| .queue_rq = ubiblock_queue_rq, | |
| .init_request = ubiblock_init_request, | |
| }; | |
| int ubiblock_create(struct ubi_volume_info *vi) | |
| { | |
| struct ubiblock *dev; | |
| struct gendisk *gd; | |
| u64 disk_capacity = vi->used_bytes >> 9; | |
| int ret; | |
| if ((sector_t)disk_capacity != disk_capacity) | |
| return -EFBIG; | |
| /* Check that the volume isn't already handled */ | |
| mutex_lock(&devices_mutex); | |
| if (find_dev_nolock(vi->ubi_num, vi->vol_id)) { | |
| ret = -EEXIST; | |
| goto out_unlock; | |
| } | |
| dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL); | |
| if (!dev) { | |
| ret = -ENOMEM; | |
| goto out_unlock; | |
| } | |
| mutex_init(&dev->dev_mutex); | |
| dev->ubi_num = vi->ubi_num; | |
| dev->vol_id = vi->vol_id; | |
| dev->leb_size = vi->usable_leb_size; | |
| /* Initialize the gendisk of this ubiblock device */ | |
| gd = alloc_disk(1); | |
| if (!gd) { | |
| pr_err("UBI: block: alloc_disk failed\n"); | |
| ret = -ENODEV; | |
| goto out_free_dev; | |
| } | |
| gd->fops = &ubiblock_ops; | |
| gd->major = ubiblock_major; | |
| gd->first_minor = idr_alloc(&ubiblock_minor_idr, dev, 0, 0, GFP_KERNEL); | |
| if (gd->first_minor < 0) { | |
| dev_err(disk_to_dev(gd), | |
| "block: dynamic minor allocation failed"); | |
| ret = -ENODEV; | |
| goto out_put_disk; | |
| } | |
| gd->private_data = dev; | |
| sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id); | |
| set_capacity(gd, disk_capacity); | |
| dev->gd = gd; | |
| dev->tag_set.ops = &ubiblock_mq_ops; | |
| dev->tag_set.queue_depth = 64; | |
| dev->tag_set.numa_node = NUMA_NO_NODE; | |
| dev->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; | |
| dev->tag_set.cmd_size = sizeof(struct ubiblock_pdu); | |
| dev->tag_set.driver_data = dev; | |
| dev->tag_set.nr_hw_queues = 1; | |
| ret = blk_mq_alloc_tag_set(&dev->tag_set); | |
| if (ret) { | |
| dev_err(disk_to_dev(dev->gd), "blk_mq_alloc_tag_set failed"); | |
| goto out_remove_minor; | |
| } | |
| dev->rq = blk_mq_init_queue(&dev->tag_set); | |
| if (IS_ERR(dev->rq)) { | |
| dev_err(disk_to_dev(gd), "blk_mq_init_queue failed"); | |
| ret = PTR_ERR(dev->rq); | |
| goto out_free_tags; | |
| } | |
| blk_queue_max_segments(dev->rq, UBI_MAX_SG_COUNT); | |
| dev->rq->queuedata = dev; | |
| dev->gd->queue = dev->rq; | |
| /* | |
| * Create one workqueue per volume (per registered block device). | |
| * Rembember workqueues are cheap, they're not threads. | |
| */ | |
| dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name); | |
| if (!dev->wq) { | |
| ret = -ENOMEM; | |
| goto out_free_queue; | |
| } | |
| list_add_tail(&dev->list, &ubiblock_devices); | |
| /* Must be the last step: anyone can call file ops from now on */ | |
| add_disk(dev->gd); | |
| dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)", | |
| dev->ubi_num, dev->vol_id, vi->name); | |
| mutex_unlock(&devices_mutex); | |
| return 0; | |
| out_free_queue: | |
| blk_cleanup_queue(dev->rq); | |
| out_free_tags: | |
| blk_mq_free_tag_set(&dev->tag_set); | |
| out_remove_minor: | |
| idr_remove(&ubiblock_minor_idr, gd->first_minor); | |
| out_put_disk: | |
| put_disk(dev->gd); | |
| out_free_dev: | |
| kfree(dev); | |
| out_unlock: | |
| mutex_unlock(&devices_mutex); | |
| return ret; | |
| } | |
| static void ubiblock_cleanup(struct ubiblock *dev) | |
| { | |
| /* Stop new requests to arrive */ | |
| del_gendisk(dev->gd); | |
| /* Flush pending work */ | |
| destroy_workqueue(dev->wq); | |
| /* Finally destroy the blk queue */ | |
| blk_cleanup_queue(dev->rq); | |
| blk_mq_free_tag_set(&dev->tag_set); | |
| dev_info(disk_to_dev(dev->gd), "released"); | |
| idr_remove(&ubiblock_minor_idr, dev->gd->first_minor); | |
| put_disk(dev->gd); | |
| } | |
| int ubiblock_remove(struct ubi_volume_info *vi) | |
| { | |
| struct ubiblock *dev; | |
| int ret; | |
| mutex_lock(&devices_mutex); | |
| dev = find_dev_nolock(vi->ubi_num, vi->vol_id); | |
| if (!dev) { | |
| ret = -ENODEV; | |
| goto out_unlock; | |
| } | |
| /* Found a device, let's lock it so we can check if it's busy */ | |
| mutex_lock(&dev->dev_mutex); | |
| if (dev->refcnt > 0) { | |
| ret = -EBUSY; | |
| goto out_unlock_dev; | |
| } | |
| /* Remove from device list */ | |
| list_del(&dev->list); | |
| ubiblock_cleanup(dev); | |
| mutex_unlock(&dev->dev_mutex); | |
| mutex_unlock(&devices_mutex); | |
| kfree(dev); | |
| return 0; | |
| out_unlock_dev: | |
| mutex_unlock(&dev->dev_mutex); | |
| out_unlock: | |
| mutex_unlock(&devices_mutex); | |
| return ret; | |
| } | |
| static int ubiblock_resize(struct ubi_volume_info *vi) | |
| { | |
| struct ubiblock *dev; | |
| u64 disk_capacity = vi->used_bytes >> 9; | |
| /* | |
| * Need to lock the device list until we stop using the device, | |
| * otherwise the device struct might get released in | |
| * 'ubiblock_remove()'. | |
| */ | |
| mutex_lock(&devices_mutex); | |
| dev = find_dev_nolock(vi->ubi_num, vi->vol_id); | |
| if (!dev) { | |
| mutex_unlock(&devices_mutex); | |
| return -ENODEV; | |
| } | |
| if ((sector_t)disk_capacity != disk_capacity) { | |
| mutex_unlock(&devices_mutex); | |
| dev_warn(disk_to_dev(dev->gd), "the volume is too big (%d LEBs), cannot resize", | |
| vi->size); | |
| return -EFBIG; | |
| } | |
| mutex_lock(&dev->dev_mutex); | |
| if (get_capacity(dev->gd) != disk_capacity) { | |
| set_capacity(dev->gd, disk_capacity); | |
| dev_info(disk_to_dev(dev->gd), "resized to %lld bytes", | |
| vi->used_bytes); | |
| } | |
| mutex_unlock(&dev->dev_mutex); | |
| mutex_unlock(&devices_mutex); | |
| return 0; | |
| } | |
| static int ubiblock_notify(struct notifier_block *nb, | |
| unsigned long notification_type, void *ns_ptr) | |
| { | |
| struct ubi_notification *nt = ns_ptr; | |
| switch (notification_type) { | |
| case UBI_VOLUME_ADDED: | |
| /* | |
| * We want to enforce explicit block device creation for | |
| * volumes, so when a volume is added we do nothing. | |
| */ | |
| break; | |
| case UBI_VOLUME_REMOVED: | |
| ubiblock_remove(&nt->vi); | |
| break; | |
| case UBI_VOLUME_RESIZED: | |
| ubiblock_resize(&nt->vi); | |
| break; | |
| case UBI_VOLUME_UPDATED: | |
| /* | |
| * If the volume is static, a content update might mean the | |
| * size (i.e. used_bytes) was also changed. | |
| */ | |
| if (nt->vi.vol_type == UBI_STATIC_VOLUME) | |
| ubiblock_resize(&nt->vi); | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block ubiblock_notifier = { | |
| .notifier_call = ubiblock_notify, | |
| }; | |
| static struct ubi_volume_desc * __init | |
| open_volume_desc(const char *name, int ubi_num, int vol_id) | |
| { | |
| if (ubi_num == -1) | |
| /* No ubi num, name must be a vol device path */ | |
| return ubi_open_volume_path(name, UBI_READONLY); | |
| else if (vol_id == -1) | |
| /* No vol_id, must be vol_name */ | |
| return ubi_open_volume_nm(ubi_num, name, UBI_READONLY); | |
| else | |
| return ubi_open_volume(ubi_num, vol_id, UBI_READONLY); | |
| } | |
| static void __init ubiblock_create_from_param(void) | |
| { | |
| int i, ret = 0; | |
| struct ubiblock_param *p; | |
| struct ubi_volume_desc *desc; | |
| struct ubi_volume_info vi; | |
| /* | |
| * If there is an error creating one of the ubiblocks, continue on to | |
| * create the following ubiblocks. This helps in a circumstance where | |
| * the kernel command-line specifies multiple block devices and some | |
| * may be broken, but we still want the working ones to come up. | |
| */ | |
| for (i = 0; i < ubiblock_devs; i++) { | |
| p = &ubiblock_param[i]; | |
| desc = open_volume_desc(p->name, p->ubi_num, p->vol_id); | |
| if (IS_ERR(desc)) { | |
| pr_err( | |
| "UBI: block: can't open volume on ubi%d_%d, err=%ld\n", | |
| p->ubi_num, p->vol_id, PTR_ERR(desc)); | |
| continue; | |
| } | |
| ubi_get_volume_info(desc, &vi); | |
| ubi_close_volume(desc); | |
| ret = ubiblock_create(&vi); | |
| if (ret) { | |
| pr_err( | |
| "UBI: block: can't add '%s' volume on ubi%d_%d, err=%d\n", | |
| vi.name, p->ubi_num, p->vol_id, ret); | |
| continue; | |
| } | |
| } | |
| } | |
| static void ubiblock_remove_all(void) | |
| { | |
| struct ubiblock *next; | |
| struct ubiblock *dev; | |
| mutex_lock(&devices_mutex); | |
| list_for_each_entry_safe(dev, next, &ubiblock_devices, list) { | |
| /* The module is being forcefully removed */ | |
| WARN_ON(dev->desc); | |
| /* Remove from device list */ | |
| list_del(&dev->list); | |
| ubiblock_cleanup(dev); | |
| kfree(dev); | |
| } | |
| mutex_unlock(&devices_mutex); | |
| } | |
| int __init ubiblock_init(void) | |
| { | |
| int ret; | |
| ubiblock_major = register_blkdev(0, "ubiblock"); | |
| if (ubiblock_major < 0) | |
| return ubiblock_major; | |
| /* | |
| * Attach block devices from 'block=' module param. | |
| * Even if one block device in the param list fails to come up, | |
| * still allow the module to load and leave any others up. | |
| */ | |
| ubiblock_create_from_param(); | |
| /* | |
| * Block devices are only created upon user requests, so we ignore | |
| * existing volumes. | |
| */ | |
| ret = ubi_register_volume_notifier(&ubiblock_notifier, 1); | |
| if (ret) | |
| goto err_unreg; | |
| return 0; | |
| err_unreg: | |
| unregister_blkdev(ubiblock_major, "ubiblock"); | |
| ubiblock_remove_all(); | |
| return ret; | |
| } | |
| void __exit ubiblock_exit(void) | |
| { | |
| ubi_unregister_volume_notifier(&ubiblock_notifier); | |
| ubiblock_remove_all(); | |
| unregister_blkdev(ubiblock_major, "ubiblock"); | |
| } |