| // SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause | |
| /* | |
| * Northstar Plus switch SerDes/SGMII PHY main logic | |
| * | |
| * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/delay.h> | |
| #include <linux/kernel.h> | |
| #include <linux/phy.h> | |
| #include <linux/phylink.h> | |
| #include <net/dsa.h> | |
| #include "b53_priv.h" | |
| #include "b53_serdes.h" | |
| #include "b53_regs.h" | |
| static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block, | |
| u16 value) | |
| { | |
| b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); | |
| b53_write16(dev, B53_SERDES_PAGE, offset, value); | |
| } | |
| static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block) | |
| { | |
| u16 value; | |
| b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); | |
| b53_read16(dev, B53_SERDES_PAGE, offset, &value); | |
| return value; | |
| } | |
| static void b53_serdes_set_lane(struct b53_device *dev, u8 lane) | |
| { | |
| if (dev->serdes_lane == lane) | |
| return; | |
| WARN_ON(lane > 1); | |
| b53_serdes_write_blk(dev, B53_SERDES_LANE, | |
| SERDES_XGXSBLK0_BLOCKADDRESS, lane); | |
| dev->serdes_lane = lane; | |
| } | |
| static void b53_serdes_write(struct b53_device *dev, u8 lane, | |
| u8 offset, u16 block, u16 value) | |
| { | |
| b53_serdes_set_lane(dev, lane); | |
| b53_serdes_write_blk(dev, offset, block, value); | |
| } | |
| static u16 b53_serdes_read(struct b53_device *dev, u8 lane, | |
| u8 offset, u16 block) | |
| { | |
| b53_serdes_set_lane(dev, lane); | |
| return b53_serdes_read_blk(dev, offset, block); | |
| } | |
| void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode, | |
| const struct phylink_link_state *state) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| u16 reg; | |
| if (lane == B53_INVALID_LANE) | |
| return; | |
| reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), | |
| SERDES_DIGITAL_BLK); | |
| if (state->interface == PHY_INTERFACE_MODE_1000BASEX) | |
| reg |= FIBER_MODE_1000X; | |
| else | |
| reg &= ~FIBER_MODE_1000X; | |
| b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), | |
| SERDES_DIGITAL_BLK, reg); | |
| } | |
| EXPORT_SYMBOL(b53_serdes_config); | |
| void b53_serdes_an_restart(struct b53_device *dev, int port) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| u16 reg; | |
| if (lane == B53_INVALID_LANE) | |
| return; | |
| reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), | |
| SERDES_MII_BLK); | |
| reg |= BMCR_ANRESTART; | |
| b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), | |
| SERDES_MII_BLK, reg); | |
| } | |
| EXPORT_SYMBOL(b53_serdes_an_restart); | |
| int b53_serdes_link_state(struct b53_device *dev, int port, | |
| struct phylink_link_state *state) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| u16 dig, bmsr; | |
| if (lane == B53_INVALID_LANE) | |
| return 1; | |
| dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS, | |
| SERDES_DIGITAL_BLK); | |
| bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR), | |
| SERDES_MII_BLK); | |
| switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) { | |
| case SPEED_STATUS_10: | |
| state->speed = SPEED_10; | |
| break; | |
| case SPEED_STATUS_100: | |
| state->speed = SPEED_100; | |
| break; | |
| case SPEED_STATUS_1000: | |
| state->speed = SPEED_1000; | |
| break; | |
| default: | |
| case SPEED_STATUS_2500: | |
| state->speed = SPEED_2500; | |
| break; | |
| } | |
| state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF; | |
| state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); | |
| state->link = !!(dig & LINK_STATUS); | |
| if (dig & PAUSE_RESOLUTION_RX_SIDE) | |
| state->pause |= MLO_PAUSE_RX; | |
| if (dig & PAUSE_RESOLUTION_TX_SIDE) | |
| state->pause |= MLO_PAUSE_TX; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(b53_serdes_link_state); | |
| void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, | |
| phy_interface_t interface, bool link_up) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| u16 reg; | |
| if (lane == B53_INVALID_LANE) | |
| return; | |
| reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), | |
| SERDES_MII_BLK); | |
| if (link_up) | |
| reg &= ~BMCR_PDOWN; | |
| else | |
| reg |= BMCR_PDOWN; | |
| b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), | |
| SERDES_MII_BLK, reg); | |
| } | |
| EXPORT_SYMBOL(b53_serdes_link_set); | |
| void b53_serdes_phylink_validate(struct b53_device *dev, int port, | |
| unsigned long *supported, | |
| struct phylink_link_state *state) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| if (lane == B53_INVALID_LANE) | |
| return; | |
| switch (lane) { | |
| case 0: | |
| phylink_set(supported, 2500baseX_Full); | |
| /* fallthrough */ | |
| case 1: | |
| phylink_set(supported, 1000baseX_Full); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL(b53_serdes_phylink_validate); | |
| int b53_serdes_init(struct b53_device *dev, int port) | |
| { | |
| u8 lane = b53_serdes_map_lane(dev, port); | |
| u16 id0, msb, lsb; | |
| if (lane == B53_INVALID_LANE) | |
| return -EINVAL; | |
| id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0); | |
| msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1), | |
| SERDES_MII_BLK); | |
| lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2), | |
| SERDES_MII_BLK); | |
| if (id0 == 0 || id0 == 0xffff) { | |
| dev_err(dev->dev, "SerDes not initialized, check settings\n"); | |
| return -ENODEV; | |
| } | |
| dev_info(dev->dev, | |
| "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n", | |
| lane, id0 & SERDES_ID0_MODEL_MASK, | |
| (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41, | |
| (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK, | |
| (u32)msb << 16 | lsb); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(b53_serdes_init); | |
| MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); | |
| MODULE_DESCRIPTION("B53 Switch SerDes driver"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |