| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * drivers/net/phy/smsc.c | |
| * | |
| * Driver for SMSC PHYs | |
| * | |
| * Author: Herbert Valerio Riedel | |
| * | |
| * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org> | |
| * | |
| * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/of.h> | |
| #include <linux/phy.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/smscphy.h> | |
| struct smsc_hw_stat { | |
| const char *string; | |
| u8 reg; | |
| u8 bits; | |
| }; | |
| static struct smsc_hw_stat smsc_hw_stats[] = { | |
| { "phy_symbol_errors", 26, 16}, | |
| }; | |
| struct smsc_phy_priv { | |
| bool energy_enable; | |
| }; | |
| static int smsc_phy_config_intr(struct phy_device *phydev) | |
| { | |
| int rc = phy_write (phydev, MII_LAN83C185_IM, | |
| ((PHY_INTERRUPT_ENABLED == phydev->interrupts) | |
| ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS | |
| : 0)); | |
| return rc < 0 ? rc : 0; | |
| } | |
| static int smsc_phy_ack_interrupt(struct phy_device *phydev) | |
| { | |
| int rc = phy_read (phydev, MII_LAN83C185_ISF); | |
| return rc < 0 ? rc : 0; | |
| } | |
| static int smsc_phy_config_init(struct phy_device *phydev) | |
| { | |
| struct smsc_phy_priv *priv = phydev->priv; | |
| int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); | |
| if (rc < 0) | |
| return rc; | |
| if (priv->energy_enable) { | |
| /* Enable energy detect mode for this SMSC Transceivers */ | |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, | |
| rc | MII_LAN83C185_EDPWRDOWN); | |
| if (rc < 0) | |
| return rc; | |
| } | |
| return smsc_phy_ack_interrupt(phydev); | |
| } | |
| static int smsc_phy_reset(struct phy_device *phydev) | |
| { | |
| int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); | |
| if (rc < 0) | |
| return rc; | |
| /* If the SMSC PHY is in power down mode, then set it | |
| * in all capable mode before using it. | |
| */ | |
| if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { | |
| /* set "all capable" mode */ | |
| rc |= MII_LAN83C185_MODE_ALL; | |
| phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); | |
| } | |
| /* reset the phy */ | |
| return genphy_soft_reset(phydev); | |
| } | |
| static int lan911x_config_init(struct phy_device *phydev) | |
| { | |
| return smsc_phy_ack_interrupt(phydev); | |
| } | |
| /* | |
| * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable | |
| * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to | |
| * unstable detection of plugging in Ethernet cable. | |
| * This workaround disables Energy Detect Power-Down mode and waiting for | |
| * response on link pulses to detect presence of plugged Ethernet cable. | |
| * The Energy Detect Power-Down mode is enabled again in the end of procedure to | |
| * save approximately 220 mW of power if cable is unplugged. | |
| */ | |
| static int lan87xx_read_status(struct phy_device *phydev) | |
| { | |
| struct smsc_phy_priv *priv = phydev->priv; | |
| int err = genphy_read_status(phydev); | |
| if (!phydev->link && priv->energy_enable) { | |
| int i; | |
| /* Disable EDPD to wake up PHY */ | |
| int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); | |
| if (rc < 0) | |
| return rc; | |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, | |
| rc & ~MII_LAN83C185_EDPWRDOWN); | |
| if (rc < 0) | |
| return rc; | |
| /* Wait max 640 ms to detect energy */ | |
| for (i = 0; i < 64; i++) { | |
| /* Sleep to allow link test pulses to be sent */ | |
| msleep(10); | |
| rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); | |
| if (rc < 0) | |
| return rc; | |
| if (rc & MII_LAN83C185_ENERGYON) | |
| break; | |
| } | |
| /* Re-enable EDPD */ | |
| rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); | |
| if (rc < 0) | |
| return rc; | |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, | |
| rc | MII_LAN83C185_EDPWRDOWN); | |
| if (rc < 0) | |
| return rc; | |
| } | |
| return err; | |
| } | |
| static int smsc_get_sset_count(struct phy_device *phydev) | |
| { | |
| return ARRAY_SIZE(smsc_hw_stats); | |
| } | |
| static void smsc_get_strings(struct phy_device *phydev, u8 *data) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) { | |
| strncpy(data + i * ETH_GSTRING_LEN, | |
| smsc_hw_stats[i].string, ETH_GSTRING_LEN); | |
| } | |
| } | |
| static u64 smsc_get_stat(struct phy_device *phydev, int i) | |
| { | |
| struct smsc_hw_stat stat = smsc_hw_stats[i]; | |
| int val; | |
| u64 ret; | |
| val = phy_read(phydev, stat.reg); | |
| if (val < 0) | |
| ret = U64_MAX; | |
| else | |
| ret = val; | |
| return ret; | |
| } | |
| static void smsc_get_stats(struct phy_device *phydev, | |
| struct ethtool_stats *stats, u64 *data) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) | |
| data[i] = smsc_get_stat(phydev, i); | |
| } | |
| static int smsc_phy_probe(struct phy_device *phydev) | |
| { | |
| struct device *dev = &phydev->mdio.dev; | |
| struct device_node *of_node = dev->of_node; | |
| struct smsc_phy_priv *priv; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->energy_enable = true; | |
| if (of_property_read_bool(of_node, "smsc,disable-energy-detect")) | |
| priv->energy_enable = false; | |
| phydev->priv = priv; | |
| return 0; | |
| } | |
| static struct phy_driver smsc_phy_driver[] = { | |
| { | |
| .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN83C185", | |
| /* PHY_BASIC_FEATURES */ | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .config_init = smsc_phy_config_init, | |
| .soft_reset = smsc_phy_reset, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| }, { | |
| .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN8187", | |
| /* PHY_BASIC_FEATURES */ | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .config_init = smsc_phy_config_init, | |
| .soft_reset = smsc_phy_reset, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| /* Statistics */ | |
| .get_sset_count = smsc_get_sset_count, | |
| .get_strings = smsc_get_strings, | |
| .get_stats = smsc_get_stats, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| }, { | |
| .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN8700", | |
| /* PHY_BASIC_FEATURES */ | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .read_status = lan87xx_read_status, | |
| .config_init = smsc_phy_config_init, | |
| .soft_reset = smsc_phy_reset, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| /* Statistics */ | |
| .get_sset_count = smsc_get_sset_count, | |
| .get_strings = smsc_get_strings, | |
| .get_stats = smsc_get_stats, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| }, { | |
| .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN911x Internal PHY", | |
| /* PHY_BASIC_FEATURES */ | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .config_init = lan911x_config_init, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| }, { | |
| .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN8710/LAN8720", | |
| /* PHY_BASIC_FEATURES */ | |
| .flags = PHY_RST_AFTER_CLK_EN, | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .read_status = lan87xx_read_status, | |
| .config_init = smsc_phy_config_init, | |
| .soft_reset = smsc_phy_reset, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| /* Statistics */ | |
| .get_sset_count = smsc_get_sset_count, | |
| .get_strings = smsc_get_strings, | |
| .get_stats = smsc_get_stats, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| }, { | |
| .phy_id = 0x0007c110, | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "SMSC LAN8740", | |
| /* PHY_BASIC_FEATURES */ | |
| .probe = smsc_phy_probe, | |
| /* basic functions */ | |
| .read_status = lan87xx_read_status, | |
| .config_init = smsc_phy_config_init, | |
| .soft_reset = smsc_phy_reset, | |
| /* IRQ related */ | |
| .ack_interrupt = smsc_phy_ack_interrupt, | |
| .config_intr = smsc_phy_config_intr, | |
| /* Statistics */ | |
| .get_sset_count = smsc_get_sset_count, | |
| .get_strings = smsc_get_strings, | |
| .get_stats = smsc_get_stats, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| } }; | |
| module_phy_driver(smsc_phy_driver); | |
| MODULE_DESCRIPTION("SMSC PHY driver"); | |
| MODULE_AUTHOR("Herbert Valerio Riedel"); | |
| MODULE_LICENSE("GPL"); | |
| static struct mdio_device_id __maybe_unused smsc_tbl[] = { | |
| { 0x0007c0a0, 0xfffffff0 }, | |
| { 0x0007c0b0, 0xfffffff0 }, | |
| { 0x0007c0c0, 0xfffffff0 }, | |
| { 0x0007c0d0, 0xfffffff0 }, | |
| { 0x0007c0f0, 0xfffffff0 }, | |
| { 0x0007c110, 0xfffffff0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(mdio, smsc_tbl); |