| // SPDX-License-Identifier: GPL-2.0 | |
| /* Copyright(c) 2018 Intel Corporation. All rights reserved. */ | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/ndctl.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/mm.h> | |
| #include <linux/cred.h> | |
| #include <linux/key.h> | |
| #include <linux/key-type.h> | |
| #include <keys/user-type.h> | |
| #include <keys/encrypted-type.h> | |
| #include "nd-core.h" | |
| #include "nd.h" | |
| #define NVDIMM_BASE_KEY 0 | |
| #define NVDIMM_NEW_KEY 1 | |
| static bool key_revalidate = true; | |
| module_param(key_revalidate, bool, 0444); | |
| MODULE_PARM_DESC(key_revalidate, "Require key validation at init."); | |
| static const char zero_key[NVDIMM_PASSPHRASE_LEN]; | |
| static void *key_data(struct key *key) | |
| { | |
| struct encrypted_key_payload *epayload = dereference_key_locked(key); | |
| lockdep_assert_held_read(&key->sem); | |
| return epayload->decrypted_data; | |
| } | |
| static void nvdimm_put_key(struct key *key) | |
| { | |
| if (!key) | |
| return; | |
| up_read(&key->sem); | |
| key_put(key); | |
| } | |
| /* | |
| * Retrieve kernel key for DIMM and request from user space if | |
| * necessary. Returns a key held for read and must be put by | |
| * nvdimm_put_key() before the usage goes out of scope. | |
| */ | |
| static struct key *nvdimm_request_key(struct nvdimm *nvdimm) | |
| { | |
| struct key *key = NULL; | |
| static const char NVDIMM_PREFIX[] = "nvdimm:"; | |
| char desc[NVDIMM_KEY_DESC_LEN + sizeof(NVDIMM_PREFIX)]; | |
| struct device *dev = &nvdimm->dev; | |
| sprintf(desc, "%s%s", NVDIMM_PREFIX, nvdimm->dimm_id); | |
| key = request_key(&key_type_encrypted, desc, ""); | |
| if (IS_ERR(key)) { | |
| if (PTR_ERR(key) == -ENOKEY) | |
| dev_dbg(dev, "request_key() found no key\n"); | |
| else | |
| dev_dbg(dev, "request_key() upcall failed\n"); | |
| key = NULL; | |
| } else { | |
| struct encrypted_key_payload *epayload; | |
| down_read(&key->sem); | |
| epayload = dereference_key_locked(key); | |
| if (epayload->decrypted_datalen != NVDIMM_PASSPHRASE_LEN) { | |
| up_read(&key->sem); | |
| key_put(key); | |
| key = NULL; | |
| } | |
| } | |
| return key; | |
| } | |
| static const void *nvdimm_get_key_payload(struct nvdimm *nvdimm, | |
| struct key **key) | |
| { | |
| *key = nvdimm_request_key(nvdimm); | |
| if (!*key) | |
| return zero_key; | |
| return key_data(*key); | |
| } | |
| static struct key *nvdimm_lookup_user_key(struct nvdimm *nvdimm, | |
| key_serial_t id, int subclass) | |
| { | |
| key_ref_t keyref; | |
| struct key *key; | |
| struct encrypted_key_payload *epayload; | |
| struct device *dev = &nvdimm->dev; | |
| keyref = lookup_user_key(id, 0, 0); | |
| if (IS_ERR(keyref)) | |
| return NULL; | |
| key = key_ref_to_ptr(keyref); | |
| if (key->type != &key_type_encrypted) { | |
| key_put(key); | |
| return NULL; | |
| } | |
| dev_dbg(dev, "%s: key found: %#x\n", __func__, key_serial(key)); | |
| down_read_nested(&key->sem, subclass); | |
| epayload = dereference_key_locked(key); | |
| if (epayload->decrypted_datalen != NVDIMM_PASSPHRASE_LEN) { | |
| up_read(&key->sem); | |
| key_put(key); | |
| key = NULL; | |
| } | |
| return key; | |
| } | |
| static const void *nvdimm_get_user_key_payload(struct nvdimm *nvdimm, | |
| key_serial_t id, int subclass, struct key **key) | |
| { | |
| *key = NULL; | |
| if (id == 0) { | |
| if (subclass == NVDIMM_BASE_KEY) | |
| return zero_key; | |
| else | |
| return NULL; | |
| } | |
| *key = nvdimm_lookup_user_key(nvdimm, id, subclass); | |
| if (!*key) | |
| return NULL; | |
| return key_data(*key); | |
| } | |
| static int nvdimm_key_revalidate(struct nvdimm *nvdimm) | |
| { | |
| struct key *key; | |
| int rc; | |
| const void *data; | |
| if (!nvdimm->sec.ops->change_key) | |
| return -EOPNOTSUPP; | |
| data = nvdimm_get_key_payload(nvdimm, &key); | |
| /* | |
| * Send the same key to the hardware as new and old key to | |
| * verify that the key is good. | |
| */ | |
| rc = nvdimm->sec.ops->change_key(nvdimm, data, data, NVDIMM_USER); | |
| if (rc < 0) { | |
| nvdimm_put_key(key); | |
| return rc; | |
| } | |
| nvdimm_put_key(key); | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, NVDIMM_USER); | |
| return 0; | |
| } | |
| static int __nvdimm_security_unlock(struct nvdimm *nvdimm) | |
| { | |
| struct device *dev = &nvdimm->dev; | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); | |
| struct key *key; | |
| const void *data; | |
| int rc; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->unlock | |
| || nvdimm->sec.state < 0) | |
| return -EIO; | |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { | |
| dev_dbg(dev, "Security operation in progress.\n"); | |
| return -EBUSY; | |
| } | |
| /* | |
| * If the pre-OS has unlocked the DIMM, attempt to send the key | |
| * from request_key() to the hardware for verification. Failure | |
| * to revalidate the key against the hardware results in a | |
| * freeze of the security configuration. I.e. if the OS does not | |
| * have the key, security is being managed pre-OS. | |
| */ | |
| if (nvdimm->sec.state == NVDIMM_SECURITY_UNLOCKED) { | |
| if (!key_revalidate) | |
| return 0; | |
| return nvdimm_key_revalidate(nvdimm); | |
| } else | |
| data = nvdimm_get_key_payload(nvdimm, &key); | |
| rc = nvdimm->sec.ops->unlock(nvdimm, data); | |
| dev_dbg(dev, "key: %d unlock: %s\n", key_serial(key), | |
| rc == 0 ? "success" : "fail"); | |
| nvdimm_put_key(key); | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, NVDIMM_USER); | |
| return rc; | |
| } | |
| int nvdimm_security_unlock(struct device *dev) | |
| { | |
| struct nvdimm *nvdimm = to_nvdimm(dev); | |
| int rc; | |
| nvdimm_bus_lock(dev); | |
| rc = __nvdimm_security_unlock(nvdimm); | |
| nvdimm_bus_unlock(dev); | |
| return rc; | |
| } | |
| int nvdimm_security_disable(struct nvdimm *nvdimm, unsigned int keyid) | |
| { | |
| struct device *dev = &nvdimm->dev; | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); | |
| struct key *key; | |
| int rc; | |
| const void *data; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->disable | |
| || nvdimm->sec.state < 0) | |
| return -EOPNOTSUPP; | |
| if (nvdimm->sec.state >= NVDIMM_SECURITY_FROZEN) { | |
| dev_dbg(dev, "Incorrect security state: %d\n", | |
| nvdimm->sec.state); | |
| return -EIO; | |
| } | |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { | |
| dev_dbg(dev, "Security operation in progress.\n"); | |
| return -EBUSY; | |
| } | |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, | |
| NVDIMM_BASE_KEY, &key); | |
| if (!data) | |
| return -ENOKEY; | |
| rc = nvdimm->sec.ops->disable(nvdimm, data); | |
| dev_dbg(dev, "key: %d disable: %s\n", key_serial(key), | |
| rc == 0 ? "success" : "fail"); | |
| nvdimm_put_key(key); | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, NVDIMM_USER); | |
| return rc; | |
| } | |
| int nvdimm_security_update(struct nvdimm *nvdimm, unsigned int keyid, | |
| unsigned int new_keyid, | |
| enum nvdimm_passphrase_type pass_type) | |
| { | |
| struct device *dev = &nvdimm->dev; | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); | |
| struct key *key, *newkey; | |
| int rc; | |
| const void *data, *newdata; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->change_key | |
| || nvdimm->sec.state < 0) | |
| return -EOPNOTSUPP; | |
| if (nvdimm->sec.state >= NVDIMM_SECURITY_FROZEN) { | |
| dev_dbg(dev, "Incorrect security state: %d\n", | |
| nvdimm->sec.state); | |
| return -EIO; | |
| } | |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, | |
| NVDIMM_BASE_KEY, &key); | |
| if (!data) | |
| return -ENOKEY; | |
| newdata = nvdimm_get_user_key_payload(nvdimm, new_keyid, | |
| NVDIMM_NEW_KEY, &newkey); | |
| if (!newdata) { | |
| nvdimm_put_key(key); | |
| return -ENOKEY; | |
| } | |
| rc = nvdimm->sec.ops->change_key(nvdimm, data, newdata, pass_type); | |
| dev_dbg(dev, "key: %d %d update%s: %s\n", | |
| key_serial(key), key_serial(newkey), | |
| pass_type == NVDIMM_MASTER ? "(master)" : "(user)", | |
| rc == 0 ? "success" : "fail"); | |
| nvdimm_put_key(newkey); | |
| nvdimm_put_key(key); | |
| if (pass_type == NVDIMM_MASTER) | |
| nvdimm->sec.ext_state = nvdimm_security_state(nvdimm, | |
| NVDIMM_MASTER); | |
| else | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, | |
| NVDIMM_USER); | |
| return rc; | |
| } | |
| int nvdimm_security_erase(struct nvdimm *nvdimm, unsigned int keyid, | |
| enum nvdimm_passphrase_type pass_type) | |
| { | |
| struct device *dev = &nvdimm->dev; | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); | |
| struct key *key = NULL; | |
| int rc; | |
| const void *data; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->erase | |
| || nvdimm->sec.state < 0) | |
| return -EOPNOTSUPP; | |
| if (atomic_read(&nvdimm->busy)) { | |
| dev_dbg(dev, "Unable to secure erase while DIMM active.\n"); | |
| return -EBUSY; | |
| } | |
| if (nvdimm->sec.state >= NVDIMM_SECURITY_FROZEN) { | |
| dev_dbg(dev, "Incorrect security state: %d\n", | |
| nvdimm->sec.state); | |
| return -EIO; | |
| } | |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { | |
| dev_dbg(dev, "Security operation in progress.\n"); | |
| return -EBUSY; | |
| } | |
| if (nvdimm->sec.ext_state != NVDIMM_SECURITY_UNLOCKED | |
| && pass_type == NVDIMM_MASTER) { | |
| dev_dbg(dev, | |
| "Attempt to secure erase in wrong master state.\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, | |
| NVDIMM_BASE_KEY, &key); | |
| if (!data) | |
| return -ENOKEY; | |
| rc = nvdimm->sec.ops->erase(nvdimm, data, pass_type); | |
| dev_dbg(dev, "key: %d erase%s: %s\n", key_serial(key), | |
| pass_type == NVDIMM_MASTER ? "(master)" : "(user)", | |
| rc == 0 ? "success" : "fail"); | |
| nvdimm_put_key(key); | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, NVDIMM_USER); | |
| return rc; | |
| } | |
| int nvdimm_security_overwrite(struct nvdimm *nvdimm, unsigned int keyid) | |
| { | |
| struct device *dev = &nvdimm->dev; | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); | |
| struct key *key = NULL; | |
| int rc; | |
| const void *data; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->overwrite | |
| || nvdimm->sec.state < 0) | |
| return -EOPNOTSUPP; | |
| if (atomic_read(&nvdimm->busy)) { | |
| dev_dbg(dev, "Unable to overwrite while DIMM active.\n"); | |
| return -EBUSY; | |
| } | |
| if (dev->driver == NULL) { | |
| dev_dbg(dev, "Unable to overwrite while DIMM active.\n"); | |
| return -EINVAL; | |
| } | |
| if (nvdimm->sec.state >= NVDIMM_SECURITY_FROZEN) { | |
| dev_dbg(dev, "Incorrect security state: %d\n", | |
| nvdimm->sec.state); | |
| return -EIO; | |
| } | |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { | |
| dev_dbg(dev, "Security operation in progress.\n"); | |
| return -EBUSY; | |
| } | |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, | |
| NVDIMM_BASE_KEY, &key); | |
| if (!data) | |
| return -ENOKEY; | |
| rc = nvdimm->sec.ops->overwrite(nvdimm, data); | |
| dev_dbg(dev, "key: %d overwrite submission: %s\n", key_serial(key), | |
| rc == 0 ? "success" : "fail"); | |
| nvdimm_put_key(key); | |
| if (rc == 0) { | |
| set_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags); | |
| set_bit(NDD_WORK_PENDING, &nvdimm->flags); | |
| nvdimm->sec.state = NVDIMM_SECURITY_OVERWRITE; | |
| /* | |
| * Make sure we don't lose device while doing overwrite | |
| * query. | |
| */ | |
| get_device(dev); | |
| queue_delayed_work(system_wq, &nvdimm->dwork, 0); | |
| } | |
| return rc; | |
| } | |
| void __nvdimm_security_overwrite_query(struct nvdimm *nvdimm) | |
| { | |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(&nvdimm->dev); | |
| int rc; | |
| unsigned int tmo; | |
| /* The bus lock should be held at the top level of the call stack */ | |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); | |
| /* | |
| * Abort and release device if we no longer have the overwrite | |
| * flag set. It means the work has been canceled. | |
| */ | |
| if (!test_bit(NDD_WORK_PENDING, &nvdimm->flags)) | |
| return; | |
| tmo = nvdimm->sec.overwrite_tmo; | |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->query_overwrite | |
| || nvdimm->sec.state < 0) | |
| return; | |
| rc = nvdimm->sec.ops->query_overwrite(nvdimm); | |
| if (rc == -EBUSY) { | |
| /* setup delayed work again */ | |
| tmo += 10; | |
| queue_delayed_work(system_wq, &nvdimm->dwork, tmo * HZ); | |
| nvdimm->sec.overwrite_tmo = min(15U * 60U, tmo); | |
| return; | |
| } | |
| if (rc < 0) | |
| dev_dbg(&nvdimm->dev, "overwrite failed\n"); | |
| else | |
| dev_dbg(&nvdimm->dev, "overwrite completed\n"); | |
| if (nvdimm->sec.overwrite_state) | |
| sysfs_notify_dirent(nvdimm->sec.overwrite_state); | |
| nvdimm->sec.overwrite_tmo = 0; | |
| clear_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags); | |
| clear_bit(NDD_WORK_PENDING, &nvdimm->flags); | |
| put_device(&nvdimm->dev); | |
| nvdimm->sec.state = nvdimm_security_state(nvdimm, NVDIMM_USER); | |
| nvdimm->sec.ext_state = nvdimm_security_state(nvdimm, NVDIMM_MASTER); | |
| } | |
| void nvdimm_security_overwrite_query(struct work_struct *work) | |
| { | |
| struct nvdimm *nvdimm = | |
| container_of(work, typeof(*nvdimm), dwork.work); | |
| nvdimm_bus_lock(&nvdimm->dev); | |
| __nvdimm_security_overwrite_query(nvdimm); | |
| nvdimm_bus_unlock(&nvdimm->dev); | |
| } |