| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * MediaTek USB3.1 gen2 xsphy Driver | |
| * | |
| * Copyright (c) 2018 MediaTek Inc. | |
| * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> | |
| * | |
| */ | |
| #include <dt-bindings/phy/phy.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/module.h> | |
| #include <linux/of_address.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| /* u2 phy banks */ | |
| #define SSUSB_SIFSLV_MISC 0x000 | |
| #define SSUSB_SIFSLV_U2FREQ 0x100 | |
| #define SSUSB_SIFSLV_U2PHY_COM 0x300 | |
| /* u3 phy shared banks */ | |
| #define SSPXTP_SIFSLV_DIG_GLB 0x000 | |
| #define SSPXTP_SIFSLV_PHYA_GLB 0x100 | |
| /* u3 phy banks */ | |
| #define SSPXTP_SIFSLV_DIG_LN_TOP 0x000 | |
| #define SSPXTP_SIFSLV_DIG_LN_TX0 0x100 | |
| #define SSPXTP_SIFSLV_DIG_LN_RX0 0x200 | |
| #define SSPXTP_SIFSLV_DIG_LN_DAIF 0x300 | |
| #define SSPXTP_SIFSLV_PHYA_LN 0x400 | |
| #define XSP_U2FREQ_FMCR0 ((SSUSB_SIFSLV_U2FREQ) + 0x00) | |
| #define P2F_RG_FREQDET_EN BIT(24) | |
| #define P2F_RG_CYCLECNT GENMASK(23, 0) | |
| #define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) | |
| #define XSP_U2FREQ_MMONR0 ((SSUSB_SIFSLV_U2FREQ) + 0x0c) | |
| #define XSP_U2FREQ_FMMONR1 ((SSUSB_SIFSLV_U2FREQ) + 0x10) | |
| #define P2F_RG_FRCK_EN BIT(8) | |
| #define P2F_USB_FM_VALID BIT(0) | |
| #define XSP_USBPHYACR0 ((SSUSB_SIFSLV_U2PHY_COM) + 0x00) | |
| #define P2A0_RG_INTR_EN BIT(5) | |
| #define XSP_USBPHYACR1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x04) | |
| #define P2A1_RG_INTR_CAL GENMASK(23, 19) | |
| #define P2A1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) | |
| #define P2A1_RG_VRT_SEL GENMASK(14, 12) | |
| #define P2A1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) | |
| #define P2A1_RG_TERM_SEL GENMASK(10, 8) | |
| #define P2A1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) | |
| #define XSP_USBPHYACR5 ((SSUSB_SIFSLV_U2PHY_COM) + 0x014) | |
| #define P2A5_RG_HSTX_SRCAL_EN BIT(15) | |
| #define P2A5_RG_HSTX_SRCTRL GENMASK(14, 12) | |
| #define P2A5_RG_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) | |
| #define XSP_USBPHYACR6 ((SSUSB_SIFSLV_U2PHY_COM) + 0x018) | |
| #define P2A6_RG_BC11_SW_EN BIT(23) | |
| #define P2A6_RG_OTG_VBUSCMP_EN BIT(20) | |
| #define XSP_U2PHYDTM1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x06C) | |
| #define P2D_FORCE_IDDIG BIT(9) | |
| #define P2D_RG_VBUSVALID BIT(5) | |
| #define P2D_RG_SESSEND BIT(4) | |
| #define P2D_RG_AVALID BIT(2) | |
| #define P2D_RG_IDDIG BIT(1) | |
| #define SSPXTP_PHYA_GLB_00 ((SSPXTP_SIFSLV_PHYA_GLB) + 0x00) | |
| #define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(21, 16) | |
| #define RG_XTP_GLB_BIAS_INTR_CTRL_VAL(x) ((0x3f & (x)) << 16) | |
| #define SSPXTP_PHYA_LN_04 ((SSPXTP_SIFSLV_PHYA_LN) + 0x04) | |
| #define RG_XTP_LN0_TX_IMPSEL GENMASK(4, 0) | |
| #define RG_XTP_LN0_TX_IMPSEL_VAL(x) (0x1f & (x)) | |
| #define SSPXTP_PHYA_LN_14 ((SSPXTP_SIFSLV_PHYA_LN) + 0x014) | |
| #define RG_XTP_LN0_RX_IMPSEL GENMASK(4, 0) | |
| #define RG_XTP_LN0_RX_IMPSEL_VAL(x) (0x1f & (x)) | |
| #define XSP_REF_CLK 26 /* MHZ */ | |
| #define XSP_SLEW_RATE_COEF 17 | |
| #define XSP_SR_COEF_DIVISOR 1000 | |
| #define XSP_FM_DET_CYCLE_CNT 1024 | |
| struct xsphy_instance { | |
| struct phy *phy; | |
| void __iomem *port_base; | |
| struct clk *ref_clk; /* reference clock of anolog phy */ | |
| u32 index; | |
| u32 type; | |
| /* only for HQA test */ | |
| int efuse_intr; | |
| int efuse_tx_imp; | |
| int efuse_rx_imp; | |
| /* u2 eye diagram */ | |
| int eye_src; | |
| int eye_vrt; | |
| int eye_term; | |
| }; | |
| struct mtk_xsphy { | |
| struct device *dev; | |
| void __iomem *glb_base; /* only shared u3 sif */ | |
| struct xsphy_instance **phys; | |
| int nphys; | |
| int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ | |
| int src_coef; /* coefficient for slew rate calibrate */ | |
| }; | |
| static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| int calib_val; | |
| int fm_out; | |
| u32 tmp; | |
| /* use force value */ | |
| if (inst->eye_src) | |
| return; | |
| /* enable USB ring oscillator */ | |
| tmp = readl(pbase + XSP_USBPHYACR5); | |
| tmp |= P2A5_RG_HSTX_SRCAL_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR5); | |
| udelay(1); /* wait clock stable */ | |
| /* enable free run clock */ | |
| tmp = readl(pbase + XSP_U2FREQ_FMMONR1); | |
| tmp |= P2F_RG_FRCK_EN; | |
| writel(tmp, pbase + XSP_U2FREQ_FMMONR1); | |
| /* set cycle count as 1024 */ | |
| tmp = readl(pbase + XSP_U2FREQ_FMCR0); | |
| tmp &= ~(P2F_RG_CYCLECNT); | |
| tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT); | |
| writel(tmp, pbase + XSP_U2FREQ_FMCR0); | |
| /* enable frequency meter */ | |
| tmp = readl(pbase + XSP_U2FREQ_FMCR0); | |
| tmp |= P2F_RG_FREQDET_EN; | |
| writel(tmp, pbase + XSP_U2FREQ_FMCR0); | |
| /* ignore return value */ | |
| readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp, | |
| (tmp & P2F_USB_FM_VALID), 10, 200); | |
| fm_out = readl(pbase + XSP_U2FREQ_MMONR0); | |
| /* disable frequency meter */ | |
| tmp = readl(pbase + XSP_U2FREQ_FMCR0); | |
| tmp &= ~P2F_RG_FREQDET_EN; | |
| writel(tmp, pbase + XSP_U2FREQ_FMCR0); | |
| /* disable free run clock */ | |
| tmp = readl(pbase + XSP_U2FREQ_FMMONR1); | |
| tmp &= ~P2F_RG_FRCK_EN; | |
| writel(tmp, pbase + XSP_U2FREQ_FMMONR1); | |
| if (fm_out) { | |
| /* (1024 / FM_OUT) x reference clock frequency x coefficient */ | |
| tmp = xsphy->src_ref_clk * xsphy->src_coef; | |
| tmp = (tmp * XSP_FM_DET_CYCLE_CNT) / fm_out; | |
| calib_val = DIV_ROUND_CLOSEST(tmp, XSP_SR_COEF_DIVISOR); | |
| } else { | |
| /* if FM detection fail, set default value */ | |
| calib_val = 3; | |
| } | |
| dev_dbg(xsphy->dev, "phy.%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", | |
| inst->index, fm_out, calib_val, | |
| xsphy->src_ref_clk, xsphy->src_coef); | |
| /* set HS slew rate */ | |
| tmp = readl(pbase + XSP_USBPHYACR5); | |
| tmp &= ~P2A5_RG_HSTX_SRCTRL; | |
| tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val); | |
| writel(tmp, pbase + XSP_USBPHYACR5); | |
| /* disable USB ring oscillator */ | |
| tmp = readl(pbase + XSP_USBPHYACR5); | |
| tmp &= ~P2A5_RG_HSTX_SRCAL_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR5); | |
| } | |
| static void u2_phy_instance_init(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| u32 tmp; | |
| /* DP/DM BC1.1 path Disable */ | |
| tmp = readl(pbase + XSP_USBPHYACR6); | |
| tmp &= ~P2A6_RG_BC11_SW_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR6); | |
| tmp = readl(pbase + XSP_USBPHYACR0); | |
| tmp |= P2A0_RG_INTR_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR0); | |
| } | |
| static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| u32 index = inst->index; | |
| u32 tmp; | |
| tmp = readl(pbase + XSP_USBPHYACR6); | |
| tmp |= P2A6_RG_OTG_VBUSCMP_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR6); | |
| tmp = readl(pbase + XSP_U2PHYDTM1); | |
| tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID; | |
| tmp &= ~P2D_RG_SESSEND; | |
| writel(tmp, pbase + XSP_U2PHYDTM1); | |
| dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); | |
| } | |
| static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| u32 index = inst->index; | |
| u32 tmp; | |
| tmp = readl(pbase + XSP_USBPHYACR6); | |
| tmp &= ~P2A6_RG_OTG_VBUSCMP_EN; | |
| writel(tmp, pbase + XSP_USBPHYACR6); | |
| tmp = readl(pbase + XSP_U2PHYDTM1); | |
| tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID); | |
| tmp |= P2D_RG_SESSEND; | |
| writel(tmp, pbase + XSP_U2PHYDTM1); | |
| dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); | |
| } | |
| static void u2_phy_instance_set_mode(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst, | |
| enum phy_mode mode) | |
| { | |
| u32 tmp; | |
| tmp = readl(inst->port_base + XSP_U2PHYDTM1); | |
| switch (mode) { | |
| case PHY_MODE_USB_DEVICE: | |
| tmp |= P2D_FORCE_IDDIG | P2D_RG_IDDIG; | |
| break; | |
| case PHY_MODE_USB_HOST: | |
| tmp |= P2D_FORCE_IDDIG; | |
| tmp &= ~P2D_RG_IDDIG; | |
| break; | |
| case PHY_MODE_USB_OTG: | |
| tmp &= ~(P2D_FORCE_IDDIG | P2D_RG_IDDIG); | |
| break; | |
| default: | |
| return; | |
| } | |
| writel(tmp, inst->port_base + XSP_U2PHYDTM1); | |
| } | |
| static void phy_parse_property(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| struct device *dev = &inst->phy->dev; | |
| switch (inst->type) { | |
| case PHY_TYPE_USB2: | |
| device_property_read_u32(dev, "mediatek,efuse-intr", | |
| &inst->efuse_intr); | |
| device_property_read_u32(dev, "mediatek,eye-src", | |
| &inst->eye_src); | |
| device_property_read_u32(dev, "mediatek,eye-vrt", | |
| &inst->eye_vrt); | |
| device_property_read_u32(dev, "mediatek,eye-term", | |
| &inst->eye_term); | |
| dev_dbg(dev, "intr:%d, src:%d, vrt:%d, term:%d\n", | |
| inst->efuse_intr, inst->eye_src, | |
| inst->eye_vrt, inst->eye_term); | |
| break; | |
| case PHY_TYPE_USB3: | |
| device_property_read_u32(dev, "mediatek,efuse-intr", | |
| &inst->efuse_intr); | |
| device_property_read_u32(dev, "mediatek,efuse-tx-imp", | |
| &inst->efuse_tx_imp); | |
| device_property_read_u32(dev, "mediatek,efuse-rx-imp", | |
| &inst->efuse_rx_imp); | |
| dev_dbg(dev, "intr:%d, tx-imp:%d, rx-imp:%d\n", | |
| inst->efuse_intr, inst->efuse_tx_imp, | |
| inst->efuse_rx_imp); | |
| break; | |
| default: | |
| dev_err(xsphy->dev, "incompatible phy type\n"); | |
| return; | |
| } | |
| } | |
| static void u2_phy_props_set(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| u32 tmp; | |
| if (inst->efuse_intr) { | |
| tmp = readl(pbase + XSP_USBPHYACR1); | |
| tmp &= ~P2A1_RG_INTR_CAL; | |
| tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr); | |
| writel(tmp, pbase + XSP_USBPHYACR1); | |
| } | |
| if (inst->eye_src) { | |
| tmp = readl(pbase + XSP_USBPHYACR5); | |
| tmp &= ~P2A5_RG_HSTX_SRCTRL; | |
| tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src); | |
| writel(tmp, pbase + XSP_USBPHYACR5); | |
| } | |
| if (inst->eye_vrt) { | |
| tmp = readl(pbase + XSP_USBPHYACR1); | |
| tmp &= ~P2A1_RG_VRT_SEL; | |
| tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt); | |
| writel(tmp, pbase + XSP_USBPHYACR1); | |
| } | |
| if (inst->eye_term) { | |
| tmp = readl(pbase + XSP_USBPHYACR1); | |
| tmp &= ~P2A1_RG_TERM_SEL; | |
| tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term); | |
| writel(tmp, pbase + XSP_USBPHYACR1); | |
| } | |
| } | |
| static void u3_phy_props_set(struct mtk_xsphy *xsphy, | |
| struct xsphy_instance *inst) | |
| { | |
| void __iomem *pbase = inst->port_base; | |
| u32 tmp; | |
| if (inst->efuse_intr) { | |
| tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00); | |
| tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL; | |
| tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr); | |
| writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00); | |
| } | |
| if (inst->efuse_tx_imp) { | |
| tmp = readl(pbase + SSPXTP_PHYA_LN_04); | |
| tmp &= ~RG_XTP_LN0_TX_IMPSEL; | |
| tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp); | |
| writel(tmp, pbase + SSPXTP_PHYA_LN_04); | |
| } | |
| if (inst->efuse_rx_imp) { | |
| tmp = readl(pbase + SSPXTP_PHYA_LN_14); | |
| tmp &= ~RG_XTP_LN0_RX_IMPSEL; | |
| tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp); | |
| writel(tmp, pbase + SSPXTP_PHYA_LN_14); | |
| } | |
| } | |
| static int mtk_phy_init(struct phy *phy) | |
| { | |
| struct xsphy_instance *inst = phy_get_drvdata(phy); | |
| struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); | |
| int ret; | |
| ret = clk_prepare_enable(inst->ref_clk); | |
| if (ret) { | |
| dev_err(xsphy->dev, "failed to enable ref_clk\n"); | |
| return ret; | |
| } | |
| switch (inst->type) { | |
| case PHY_TYPE_USB2: | |
| u2_phy_instance_init(xsphy, inst); | |
| u2_phy_props_set(xsphy, inst); | |
| break; | |
| case PHY_TYPE_USB3: | |
| u3_phy_props_set(xsphy, inst); | |
| break; | |
| default: | |
| dev_err(xsphy->dev, "incompatible phy type\n"); | |
| clk_disable_unprepare(inst->ref_clk); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int mtk_phy_power_on(struct phy *phy) | |
| { | |
| struct xsphy_instance *inst = phy_get_drvdata(phy); | |
| struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); | |
| if (inst->type == PHY_TYPE_USB2) { | |
| u2_phy_instance_power_on(xsphy, inst); | |
| u2_phy_slew_rate_calibrate(xsphy, inst); | |
| } | |
| return 0; | |
| } | |
| static int mtk_phy_power_off(struct phy *phy) | |
| { | |
| struct xsphy_instance *inst = phy_get_drvdata(phy); | |
| struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); | |
| if (inst->type == PHY_TYPE_USB2) | |
| u2_phy_instance_power_off(xsphy, inst); | |
| return 0; | |
| } | |
| static int mtk_phy_exit(struct phy *phy) | |
| { | |
| struct xsphy_instance *inst = phy_get_drvdata(phy); | |
| clk_disable_unprepare(inst->ref_clk); | |
| return 0; | |
| } | |
| static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) | |
| { | |
| struct xsphy_instance *inst = phy_get_drvdata(phy); | |
| struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); | |
| if (inst->type == PHY_TYPE_USB2) | |
| u2_phy_instance_set_mode(xsphy, inst, mode); | |
| return 0; | |
| } | |
| static struct phy *mtk_phy_xlate(struct device *dev, | |
| struct of_phandle_args *args) | |
| { | |
| struct mtk_xsphy *xsphy = dev_get_drvdata(dev); | |
| struct xsphy_instance *inst = NULL; | |
| struct device_node *phy_np = args->np; | |
| int index; | |
| if (args->args_count != 1) { | |
| dev_err(dev, "invalid number of cells in 'phy' property\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| for (index = 0; index < xsphy->nphys; index++) | |
| if (phy_np == xsphy->phys[index]->phy->dev.of_node) { | |
| inst = xsphy->phys[index]; | |
| break; | |
| } | |
| if (!inst) { | |
| dev_err(dev, "failed to find appropriate phy\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| inst->type = args->args[0]; | |
| if (!(inst->type == PHY_TYPE_USB2 || | |
| inst->type == PHY_TYPE_USB3)) { | |
| dev_err(dev, "unsupported phy type: %d\n", inst->type); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| phy_parse_property(xsphy, inst); | |
| return inst->phy; | |
| } | |
| static const struct phy_ops mtk_xsphy_ops = { | |
| .init = mtk_phy_init, | |
| .exit = mtk_phy_exit, | |
| .power_on = mtk_phy_power_on, | |
| .power_off = mtk_phy_power_off, | |
| .set_mode = mtk_phy_set_mode, | |
| .owner = THIS_MODULE, | |
| }; | |
| static const struct of_device_id mtk_xsphy_id_table[] = { | |
| { .compatible = "mediatek,xsphy", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, mtk_xsphy_id_table); | |
| static int mtk_xsphy_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct device_node *child_np; | |
| struct phy_provider *provider; | |
| struct resource *glb_res; | |
| struct mtk_xsphy *xsphy; | |
| struct resource res; | |
| int port, retval; | |
| xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL); | |
| if (!xsphy) | |
| return -ENOMEM; | |
| xsphy->nphys = of_get_child_count(np); | |
| xsphy->phys = devm_kcalloc(dev, xsphy->nphys, | |
| sizeof(*xsphy->phys), GFP_KERNEL); | |
| if (!xsphy->phys) | |
| return -ENOMEM; | |
| xsphy->dev = dev; | |
| platform_set_drvdata(pdev, xsphy); | |
| glb_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| /* optional, may not exist if no u3 phys */ | |
| if (glb_res) { | |
| /* get banks shared by multiple u3 phys */ | |
| xsphy->glb_base = devm_ioremap_resource(dev, glb_res); | |
| if (IS_ERR(xsphy->glb_base)) { | |
| dev_err(dev, "failed to remap glb regs\n"); | |
| return PTR_ERR(xsphy->glb_base); | |
| } | |
| } | |
| xsphy->src_ref_clk = XSP_REF_CLK; | |
| xsphy->src_coef = XSP_SLEW_RATE_COEF; | |
| /* update parameters of slew rate calibrate if exist */ | |
| device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", | |
| &xsphy->src_ref_clk); | |
| device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef); | |
| port = 0; | |
| for_each_child_of_node(np, child_np) { | |
| struct xsphy_instance *inst; | |
| struct phy *phy; | |
| inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); | |
| if (!inst) { | |
| retval = -ENOMEM; | |
| goto put_child; | |
| } | |
| xsphy->phys[port] = inst; | |
| phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops); | |
| if (IS_ERR(phy)) { | |
| dev_err(dev, "failed to create phy\n"); | |
| retval = PTR_ERR(phy); | |
| goto put_child; | |
| } | |
| retval = of_address_to_resource(child_np, 0, &res); | |
| if (retval) { | |
| dev_err(dev, "failed to get address resource(id-%d)\n", | |
| port); | |
| goto put_child; | |
| } | |
| inst->port_base = devm_ioremap_resource(&phy->dev, &res); | |
| if (IS_ERR(inst->port_base)) { | |
| dev_err(dev, "failed to remap phy regs\n"); | |
| retval = PTR_ERR(inst->port_base); | |
| goto put_child; | |
| } | |
| inst->phy = phy; | |
| inst->index = port; | |
| phy_set_drvdata(phy, inst); | |
| port++; | |
| inst->ref_clk = devm_clk_get(&phy->dev, "ref"); | |
| if (IS_ERR(inst->ref_clk)) { | |
| dev_err(dev, "failed to get ref_clk(id-%d)\n", port); | |
| retval = PTR_ERR(inst->ref_clk); | |
| goto put_child; | |
| } | |
| } | |
| provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); | |
| return PTR_ERR_OR_ZERO(provider); | |
| put_child: | |
| of_node_put(child_np); | |
| return retval; | |
| } | |
| static struct platform_driver mtk_xsphy_driver = { | |
| .probe = mtk_xsphy_probe, | |
| .driver = { | |
| .name = "mtk-xsphy", | |
| .of_match_table = mtk_xsphy_id_table, | |
| }, | |
| }; | |
| module_platform_driver(mtk_xsphy_driver); | |
| MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); | |
| MODULE_DESCRIPTION("MediaTek USB XS-PHY driver"); | |
| MODULE_LICENSE("GPL v2"); |