| // SPDX-License-Identifier: GPL-2.0-or-later | |
| // | |
| // Copyright (C) 2018 ROHM Semiconductors | |
| // | |
| // RTC driver for ROHM BD70528 PMIC | |
| #include <linux/bcd.h> | |
| #include <linux/mfd/rohm-bd70528.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/rtc.h> | |
| /* | |
| * We read regs RTC_SEC => RTC_YEAR | |
| * this struct is ordered according to chip registers. | |
| * Keep it u8 only to avoid padding issues. | |
| */ | |
| struct bd70528_rtc_day { | |
| u8 sec; | |
| u8 min; | |
| u8 hour; | |
| } __packed; | |
| struct bd70528_rtc_data { | |
| struct bd70528_rtc_day time; | |
| u8 week; | |
| u8 day; | |
| u8 month; | |
| u8 year; | |
| } __packed; | |
| struct bd70528_rtc_wake { | |
| struct bd70528_rtc_day time; | |
| u8 ctrl; | |
| } __packed; | |
| struct bd70528_rtc_alm { | |
| struct bd70528_rtc_data data; | |
| u8 alm_mask; | |
| u8 alm_repeat; | |
| } __packed; | |
| struct bd70528_rtc { | |
| struct rohm_regmap_dev *mfd; | |
| struct device *dev; | |
| }; | |
| static int bd70528_set_wake(struct rohm_regmap_dev *bd70528, | |
| int enable, int *old_state) | |
| { | |
| int ret; | |
| unsigned int ctrl_reg; | |
| ret = regmap_read(bd70528->regmap, BD70528_REG_WAKE_EN, &ctrl_reg); | |
| if (ret) | |
| return ret; | |
| if (old_state) { | |
| if (ctrl_reg & BD70528_MASK_WAKE_EN) | |
| *old_state |= BD70528_WAKE_STATE_BIT; | |
| else | |
| *old_state &= ~BD70528_WAKE_STATE_BIT; | |
| if (!enable == !(*old_state & BD70528_WAKE_STATE_BIT)) | |
| return 0; | |
| } | |
| if (enable) | |
| ctrl_reg |= BD70528_MASK_WAKE_EN; | |
| else | |
| ctrl_reg &= ~BD70528_MASK_WAKE_EN; | |
| return regmap_write(bd70528->regmap, BD70528_REG_WAKE_EN, | |
| ctrl_reg); | |
| } | |
| static int bd70528_set_elapsed_tmr(struct rohm_regmap_dev *bd70528, | |
| int enable, int *old_state) | |
| { | |
| int ret; | |
| unsigned int ctrl_reg; | |
| /* | |
| * TBD | |
| * What is the purpose of elapsed timer ? | |
| * Is the timeout registers counting down, or is the disable - re-enable | |
| * going to restart the elapsed-time counting? If counting is restarted | |
| * the timeout should be decreased by the amount of time that has | |
| * elapsed since starting the timer. Maybe we should store the monotonic | |
| * clock value when timer is started so that if RTC is set while timer | |
| * is armed we could do the compensation. This is a hack if RTC/system | |
| * clk are drifting. OTOH, RTC controlled via I2C is in any case | |
| * inaccurate... | |
| */ | |
| ret = regmap_read(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, | |
| &ctrl_reg); | |
| if (ret) | |
| return ret; | |
| if (old_state) { | |
| if (ctrl_reg & BD70528_MASK_ELAPSED_TIMER_EN) | |
| *old_state |= BD70528_ELAPSED_STATE_BIT; | |
| else | |
| *old_state &= ~BD70528_ELAPSED_STATE_BIT; | |
| if ((!enable) == (!(*old_state & BD70528_ELAPSED_STATE_BIT))) | |
| return 0; | |
| } | |
| if (enable) | |
| ctrl_reg |= BD70528_MASK_ELAPSED_TIMER_EN; | |
| else | |
| ctrl_reg &= ~BD70528_MASK_ELAPSED_TIMER_EN; | |
| return regmap_write(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, | |
| ctrl_reg); | |
| } | |
| static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state, | |
| int *old_state) | |
| { | |
| int ret; | |
| ret = bd70528_wdt_set(r->mfd, new_state & BD70528_WDT_STATE_BIT, | |
| old_state); | |
| if (ret) { | |
| dev_err(r->dev, | |
| "Failed to disable WDG for RTC setting (%d)\n", ret); | |
| return ret; | |
| } | |
| ret = bd70528_set_elapsed_tmr(r->mfd, | |
| new_state & BD70528_ELAPSED_STATE_BIT, | |
| old_state); | |
| if (ret) { | |
| dev_err(r->dev, | |
| "Failed to disable 'elapsed timer' for RTC setting\n"); | |
| return ret; | |
| } | |
| ret = bd70528_set_wake(r->mfd, new_state & BD70528_WAKE_STATE_BIT, | |
| old_state); | |
| if (ret) { | |
| dev_err(r->dev, | |
| "Failed to disable 'wake timer' for RTC setting\n"); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r, | |
| int old_state) | |
| { | |
| return bd70528_set_rtc_based_timers(r, old_state, NULL); | |
| } | |
| static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r, | |
| int *old_state) | |
| { | |
| return bd70528_set_rtc_based_timers(r, 0, old_state); | |
| } | |
| static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) | |
| { | |
| d->sec &= ~BD70528_MASK_RTC_SEC; | |
| d->min &= ~BD70528_MASK_RTC_MINUTE; | |
| d->hour &= ~BD70528_MASK_RTC_HOUR; | |
| d->sec |= bin2bcd(t->tm_sec); | |
| d->min |= bin2bcd(t->tm_min); | |
| d->hour |= bin2bcd(t->tm_hour); | |
| } | |
| static inline void tm2rtc(struct rtc_time *t, struct bd70528_rtc_data *r) | |
| { | |
| r->day &= ~BD70528_MASK_RTC_DAY; | |
| r->week &= ~BD70528_MASK_RTC_WEEK; | |
| r->month &= ~BD70528_MASK_RTC_MONTH; | |
| /* | |
| * PM and 24H bits are not used by Wake - thus we clear them | |
| * here and not in tmday2rtc() which is also used by wake. | |
| */ | |
| r->time.hour &= ~(BD70528_MASK_RTC_HOUR_PM | BD70528_MASK_RTC_HOUR_24H); | |
| tmday2rtc(t, &r->time); | |
| /* | |
| * We do always set time in 24H mode. | |
| */ | |
| r->time.hour |= BD70528_MASK_RTC_HOUR_24H; | |
| r->day |= bin2bcd(t->tm_mday); | |
| r->week |= bin2bcd(t->tm_wday); | |
| r->month |= bin2bcd(t->tm_mon + 1); | |
| r->year = bin2bcd(t->tm_year - 100); | |
| } | |
| static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t) | |
| { | |
| t->tm_sec = bcd2bin(r->time.sec & BD70528_MASK_RTC_SEC); | |
| t->tm_min = bcd2bin(r->time.min & BD70528_MASK_RTC_MINUTE); | |
| t->tm_hour = bcd2bin(r->time.hour & BD70528_MASK_RTC_HOUR); | |
| /* | |
| * If RTC is in 12H mode, then bit BD70528_MASK_RTC_HOUR_PM | |
| * is not BCD value but tells whether it is AM or PM | |
| */ | |
| if (!(r->time.hour & BD70528_MASK_RTC_HOUR_24H)) { | |
| t->tm_hour %= 12; | |
| if (r->time.hour & BD70528_MASK_RTC_HOUR_PM) | |
| t->tm_hour += 12; | |
| } | |
| t->tm_mday = bcd2bin(r->day & BD70528_MASK_RTC_DAY); | |
| t->tm_mon = bcd2bin(r->month & BD70528_MASK_RTC_MONTH) - 1; | |
| t->tm_year = 100 + bcd2bin(r->year & BD70528_MASK_RTC_YEAR); | |
| t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK); | |
| } | |
| static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) | |
| { | |
| struct bd70528_rtc_wake wake; | |
| struct bd70528_rtc_alm alm; | |
| int ret; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| struct rohm_regmap_dev *bd70528 = r->mfd; | |
| ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_WAKE_START, | |
| &wake, sizeof(wake)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read wake regs\n"); | |
| return ret; | |
| } | |
| ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, | |
| &alm, sizeof(alm)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read alarm regs\n"); | |
| return ret; | |
| } | |
| tm2rtc(&a->time, &alm.data); | |
| tmday2rtc(&a->time, &wake.time); | |
| if (a->enabled) { | |
| alm.alm_mask &= ~BD70528_MASK_ALM_EN; | |
| wake.ctrl |= BD70528_MASK_WAKE_EN; | |
| } else { | |
| alm.alm_mask |= BD70528_MASK_ALM_EN; | |
| wake.ctrl &= ~BD70528_MASK_WAKE_EN; | |
| } | |
| ret = regmap_bulk_write(bd70528->regmap, | |
| BD70528_REG_RTC_WAKE_START, &wake, | |
| sizeof(wake)); | |
| if (ret) { | |
| dev_err(dev, "Failed to set wake time\n"); | |
| return ret; | |
| } | |
| ret = regmap_bulk_write(bd70528->regmap, BD70528_REG_RTC_ALM_START, | |
| &alm, sizeof(alm)); | |
| if (ret) | |
| dev_err(dev, "Failed to set alarm time\n"); | |
| return ret; | |
| } | |
| static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a) | |
| { | |
| struct bd70528_rtc_alm alm; | |
| int ret; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| struct rohm_regmap_dev *bd70528 = r->mfd; | |
| ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, | |
| &alm, sizeof(alm)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read alarm regs\n"); | |
| return ret; | |
| } | |
| rtc2tm(&alm.data, &a->time); | |
| a->time.tm_mday = -1; | |
| a->time.tm_mon = -1; | |
| a->time.tm_year = -1; | |
| a->enabled = !(alm.alm_mask & BD70528_MASK_ALM_EN); | |
| a->pending = 0; | |
| return 0; | |
| } | |
| static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) | |
| { | |
| int ret, tmpret, old_states; | |
| struct bd70528_rtc_data rtc_data; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| struct rohm_regmap_dev *bd70528 = r->mfd; | |
| ret = bd70528_disable_rtc_based_timers(r, &old_states); | |
| if (ret) | |
| return ret; | |
| tmpret = regmap_bulk_read(bd70528->regmap, | |
| BD70528_REG_RTC_START, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (tmpret) { | |
| dev_err(dev, "Failed to read RTC time registers\n"); | |
| goto renable_out; | |
| } | |
| tm2rtc(t, &rtc_data); | |
| tmpret = regmap_bulk_write(bd70528->regmap, | |
| BD70528_REG_RTC_START, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (tmpret) { | |
| dev_err(dev, "Failed to set RTC time\n"); | |
| goto renable_out; | |
| } | |
| renable_out: | |
| ret = bd70528_re_enable_rtc_based_timers(r, old_states); | |
| if (tmpret) | |
| ret = tmpret; | |
| return ret; | |
| } | |
| static int bd70528_set_time(struct device *dev, struct rtc_time *t) | |
| { | |
| int ret; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| bd70528_wdt_lock(r->mfd); | |
| ret = bd70528_set_time_locked(dev, t); | |
| bd70528_wdt_unlock(r->mfd); | |
| return ret; | |
| } | |
| static int bd70528_get_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| struct rohm_regmap_dev *bd70528 = r->mfd; | |
| struct bd70528_rtc_data rtc_data; | |
| int ret; | |
| /* read the RTC date and time registers all at once */ | |
| ret = regmap_bulk_read(bd70528->regmap, | |
| BD70528_REG_RTC_START, &rtc_data, | |
| sizeof(rtc_data)); | |
| if (ret) { | |
| dev_err(dev, "Failed to read RTC time (err %d)\n", ret); | |
| return ret; | |
| } | |
| rtc2tm(&rtc_data, t); | |
| return 0; | |
| } | |
| static int bd70528_alm_enable(struct device *dev, unsigned int enabled) | |
| { | |
| int ret; | |
| unsigned int enableval = BD70528_MASK_ALM_EN; | |
| struct bd70528_rtc *r = dev_get_drvdata(dev); | |
| if (enabled) | |
| enableval = 0; | |
| bd70528_wdt_lock(r->mfd); | |
| ret = bd70528_set_wake(r->mfd, enabled, NULL); | |
| if (ret) { | |
| dev_err(dev, "Failed to change wake state\n"); | |
| goto out_unlock; | |
| } | |
| ret = regmap_update_bits(r->mfd->regmap, BD70528_REG_RTC_ALM_MASK, | |
| BD70528_MASK_ALM_EN, enableval); | |
| if (ret) | |
| dev_err(dev, "Failed to change alarm state\n"); | |
| out_unlock: | |
| bd70528_wdt_unlock(r->mfd); | |
| return ret; | |
| } | |
| static const struct rtc_class_ops bd70528_rtc_ops = { | |
| .read_time = bd70528_get_time, | |
| .set_time = bd70528_set_time, | |
| .read_alarm = bd70528_read_alarm, | |
| .set_alarm = bd70528_set_alarm, | |
| .alarm_irq_enable = bd70528_alm_enable, | |
| }; | |
| static irqreturn_t alm_hndlr(int irq, void *data) | |
| { | |
| struct rtc_device *rtc = data; | |
| rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF | RTC_PF); | |
| return IRQ_HANDLED; | |
| } | |
| static int bd70528_probe(struct platform_device *pdev) | |
| { | |
| struct bd70528_rtc *bd_rtc; | |
| struct rohm_regmap_dev *mfd; | |
| int ret; | |
| struct rtc_device *rtc; | |
| int irq; | |
| unsigned int hr; | |
| mfd = dev_get_drvdata(pdev->dev.parent); | |
| if (!mfd) { | |
| dev_err(&pdev->dev, "No MFD driver data\n"); | |
| return -EINVAL; | |
| } | |
| bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); | |
| if (!bd_rtc) | |
| return -ENOMEM; | |
| bd_rtc->mfd = mfd; | |
| bd_rtc->dev = &pdev->dev; | |
| irq = platform_get_irq_byname(pdev, "bd70528-rtc-alm"); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "Failed to get irq\n"); | |
| return irq; | |
| } | |
| platform_set_drvdata(pdev, bd_rtc); | |
| ret = regmap_read(mfd->regmap, BD70528_REG_RTC_HOUR, &hr); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to reag RTC clock\n"); | |
| return ret; | |
| } | |
| if (!(hr & BD70528_MASK_RTC_HOUR_24H)) { | |
| struct rtc_time t; | |
| ret = bd70528_get_time(&pdev->dev, &t); | |
| if (!ret) | |
| ret = bd70528_set_time(&pdev->dev, &t); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Setting 24H clock for RTC failed\n"); | |
| return ret; | |
| } | |
| } | |
| device_set_wakeup_capable(&pdev->dev, true); | |
| device_wakeup_enable(&pdev->dev); | |
| rtc = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(rtc)) { | |
| dev_err(&pdev->dev, "RTC device creation failed\n"); | |
| return PTR_ERR(rtc); | |
| } | |
| rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; | |
| rtc->range_max = RTC_TIMESTAMP_END_2099; | |
| rtc->ops = &bd70528_rtc_ops; | |
| /* Request alarm IRQ prior to registerig the RTC */ | |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr, | |
| IRQF_ONESHOT, "bd70528-rtc", rtc); | |
| if (ret) | |
| return ret; | |
| /* | |
| * BD70528 irq controller is not touching the main mask register. | |
| * So enable the RTC block interrupts at main level. We can just | |
| * leave them enabled as irq-controller should disable irqs | |
| * from sub-registers when IRQ is disabled or freed. | |
| */ | |
| ret = regmap_update_bits(mfd->regmap, | |
| BD70528_REG_INT_MAIN_MASK, | |
| BD70528_INT_RTC_MASK, 0); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to enable RTC interrupts\n"); | |
| return ret; | |
| } | |
| ret = rtc_register_device(rtc); | |
| if (ret) | |
| dev_err(&pdev->dev, "Registering RTC failed\n"); | |
| return ret; | |
| } | |
| static struct platform_driver bd70528_rtc = { | |
| .driver = { | |
| .name = "bd70528-rtc" | |
| }, | |
| .probe = bd70528_probe, | |
| }; | |
| module_platform_driver(bd70528_rtc); | |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); | |
| MODULE_DESCRIPTION("BD70528 RTC driver"); | |
| MODULE_LICENSE("GPL"); |