| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * rtc-ds1390.c -- driver for the Dallas/Maxim DS1390/93/94 SPI RTC | |
| * | |
| * Copyright (C) 2008 Mercury IMC Ltd | |
| * Written by Mark Jackson <mpfj@mimc.co.uk> | |
| * | |
| * NOTE: Currently this driver only supports the bare minimum for read | |
| * and write the RTC. The extra features provided by the chip family | |
| * (alarms, trickle charger, different control registers) are unavailable. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/rtc.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/bcd.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| #define DS1390_REG_100THS 0x00 | |
| #define DS1390_REG_SECONDS 0x01 | |
| #define DS1390_REG_MINUTES 0x02 | |
| #define DS1390_REG_HOURS 0x03 | |
| #define DS1390_REG_DAY 0x04 | |
| #define DS1390_REG_DATE 0x05 | |
| #define DS1390_REG_MONTH_CENT 0x06 | |
| #define DS1390_REG_YEAR 0x07 | |
| #define DS1390_REG_ALARM_100THS 0x08 | |
| #define DS1390_REG_ALARM_SECONDS 0x09 | |
| #define DS1390_REG_ALARM_MINUTES 0x0A | |
| #define DS1390_REG_ALARM_HOURS 0x0B | |
| #define DS1390_REG_ALARM_DAY_DATE 0x0C | |
| #define DS1390_REG_CONTROL 0x0D | |
| #define DS1390_REG_STATUS 0x0E | |
| #define DS1390_REG_TRICKLE 0x0F | |
| #define DS1390_TRICKLE_CHARGER_ENABLE 0xA0 | |
| #define DS1390_TRICKLE_CHARGER_250_OHM 0x01 | |
| #define DS1390_TRICKLE_CHARGER_2K_OHM 0x02 | |
| #define DS1390_TRICKLE_CHARGER_4K_OHM 0x03 | |
| #define DS1390_TRICKLE_CHARGER_NO_DIODE 0x04 | |
| #define DS1390_TRICKLE_CHARGER_DIODE 0x08 | |
| struct ds1390 { | |
| struct rtc_device *rtc; | |
| u8 txrx_buf[9]; /* cmd + 8 registers */ | |
| }; | |
| static void ds1390_set_reg(struct device *dev, unsigned char address, | |
| unsigned char data) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| unsigned char buf[2]; | |
| /* MSB must be '1' to write */ | |
| buf[0] = address | 0x80; | |
| buf[1] = data; | |
| spi_write(spi, buf, 2); | |
| } | |
| static int ds1390_get_reg(struct device *dev, unsigned char address, | |
| unsigned char *data) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| struct ds1390 *chip = dev_get_drvdata(dev); | |
| int status; | |
| if (!data) | |
| return -EINVAL; | |
| /* Clear MSB to indicate read */ | |
| chip->txrx_buf[0] = address & 0x7f; | |
| /* do the i/o */ | |
| status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); | |
| if (status != 0) | |
| return status; | |
| *data = chip->txrx_buf[0]; | |
| return 0; | |
| } | |
| static void ds1390_trickle_of_init(struct spi_device *spi) | |
| { | |
| u32 ohms = 0; | |
| u8 value; | |
| if (of_property_read_u32(spi->dev.of_node, "trickle-resistor-ohms", | |
| &ohms)) | |
| goto out; | |
| /* Enable charger */ | |
| value = DS1390_TRICKLE_CHARGER_ENABLE; | |
| if (of_property_read_bool(spi->dev.of_node, "trickle-diode-disable")) | |
| value |= DS1390_TRICKLE_CHARGER_NO_DIODE; | |
| else | |
| value |= DS1390_TRICKLE_CHARGER_DIODE; | |
| /* Resistor select */ | |
| switch (ohms) { | |
| case 250: | |
| value |= DS1390_TRICKLE_CHARGER_250_OHM; | |
| break; | |
| case 2000: | |
| value |= DS1390_TRICKLE_CHARGER_2K_OHM; | |
| break; | |
| case 4000: | |
| value |= DS1390_TRICKLE_CHARGER_4K_OHM; | |
| break; | |
| default: | |
| dev_warn(&spi->dev, | |
| "Unsupported ohm value %02ux in dt\n", ohms); | |
| return; | |
| } | |
| ds1390_set_reg(&spi->dev, DS1390_REG_TRICKLE, value); | |
| out: | |
| return; | |
| } | |
| static int ds1390_read_time(struct device *dev, struct rtc_time *dt) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| struct ds1390 *chip = dev_get_drvdata(dev); | |
| int status; | |
| /* build the message */ | |
| chip->txrx_buf[0] = DS1390_REG_SECONDS; | |
| /* do the i/o */ | |
| status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); | |
| if (status != 0) | |
| return status; | |
| /* The chip sends data in this order: | |
| * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ | |
| dt->tm_sec = bcd2bin(chip->txrx_buf[0]); | |
| dt->tm_min = bcd2bin(chip->txrx_buf[1]); | |
| dt->tm_hour = bcd2bin(chip->txrx_buf[2]); | |
| dt->tm_wday = bcd2bin(chip->txrx_buf[3]); | |
| dt->tm_mday = bcd2bin(chip->txrx_buf[4]); | |
| /* mask off century bit */ | |
| dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; | |
| /* adjust for century bit */ | |
| dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); | |
| return 0; | |
| } | |
| static int ds1390_set_time(struct device *dev, struct rtc_time *dt) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| struct ds1390 *chip = dev_get_drvdata(dev); | |
| /* build the message */ | |
| chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; | |
| chip->txrx_buf[1] = bin2bcd(dt->tm_sec); | |
| chip->txrx_buf[2] = bin2bcd(dt->tm_min); | |
| chip->txrx_buf[3] = bin2bcd(dt->tm_hour); | |
| chip->txrx_buf[4] = bin2bcd(dt->tm_wday); | |
| chip->txrx_buf[5] = bin2bcd(dt->tm_mday); | |
| chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | | |
| ((dt->tm_year > 99) ? 0x80 : 0x00); | |
| chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); | |
| /* do the i/o */ | |
| return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); | |
| } | |
| static const struct rtc_class_ops ds1390_rtc_ops = { | |
| .read_time = ds1390_read_time, | |
| .set_time = ds1390_set_time, | |
| }; | |
| static int ds1390_probe(struct spi_device *spi) | |
| { | |
| unsigned char tmp; | |
| struct ds1390 *chip; | |
| int res; | |
| spi->mode = SPI_MODE_3; | |
| spi->bits_per_word = 8; | |
| spi_setup(spi); | |
| chip = devm_kzalloc(&spi->dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| spi_set_drvdata(spi, chip); | |
| res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); | |
| if (res != 0) { | |
| dev_err(&spi->dev, "unable to read device\n"); | |
| return res; | |
| } | |
| if (spi->dev.of_node) | |
| ds1390_trickle_of_init(spi); | |
| chip->rtc = devm_rtc_device_register(&spi->dev, "ds1390", | |
| &ds1390_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(chip->rtc)) { | |
| dev_err(&spi->dev, "unable to register device\n"); | |
| res = PTR_ERR(chip->rtc); | |
| } | |
| return res; | |
| } | |
| static const struct of_device_id ds1390_of_match[] = { | |
| { .compatible = "dallas,ds1390" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, ds1390_of_match); | |
| static struct spi_driver ds1390_driver = { | |
| .driver = { | |
| .name = "rtc-ds1390", | |
| .of_match_table = of_match_ptr(ds1390_of_match), | |
| }, | |
| .probe = ds1390_probe, | |
| }; | |
| module_spi_driver(ds1390_driver); | |
| MODULE_DESCRIPTION("Dallas/Maxim DS1390/93/94 SPI RTC driver"); | |
| MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("spi:rtc-ds1390"); |