| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/sysfs.h> | |
| #include "siox.h" | |
| /* | |
| * The lowest bit in the SIOX status word signals if the in-device watchdog is | |
| * ok. If the bit is set, the device is functional. | |
| * | |
| * On writing the watchdog timer is reset when this bit toggles. | |
| */ | |
| #define SIOX_STATUS_WDG 0x01 | |
| /* | |
| * Bits 1 to 3 of the status word read as the bitwise negation of what was | |
| * clocked in before. The value clocked in is changed in each cycle and so | |
| * allows to detect transmit/receive problems. | |
| */ | |
| #define SIOX_STATUS_COUNTER 0x0e | |
| /* | |
| * Each Siox-Device has a 4 bit type number that is neither 0 nor 15. This is | |
| * available in the upper nibble of the read status. | |
| * | |
| * On write these bits are DC. | |
| */ | |
| #define SIOX_STATUS_TYPE 0xf0 | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/siox.h> | |
| static bool siox_is_registered; | |
| static void siox_master_lock(struct siox_master *smaster) | |
| { | |
| mutex_lock(&smaster->lock); | |
| } | |
| static void siox_master_unlock(struct siox_master *smaster) | |
| { | |
| mutex_unlock(&smaster->lock); | |
| } | |
| static inline u8 siox_status_clean(u8 status_read, u8 status_written) | |
| { | |
| /* | |
| * bits 3:1 of status sample the respective bit in the status | |
| * byte written in the previous cycle but inverted. So if you wrote the | |
| * status word as 0xa before (counter = 0b101), it is expected to get | |
| * back the counter bits as 0b010. | |
| * | |
| * So given the last status written this function toggles the there | |
| * unset counter bits in the read value such that the counter bits in | |
| * the return value are all zero iff the bits were read as expected to | |
| * simplify error detection. | |
| */ | |
| return status_read ^ (~status_written & 0xe); | |
| } | |
| static bool siox_device_counter_error(struct siox_device *sdevice, | |
| u8 status_clean) | |
| { | |
| return (status_clean & SIOX_STATUS_COUNTER) != 0; | |
| } | |
| static bool siox_device_type_error(struct siox_device *sdevice, u8 status_clean) | |
| { | |
| u8 statustype = (status_clean & SIOX_STATUS_TYPE) >> 4; | |
| /* | |
| * If the device knows which value the type bits should have, check | |
| * against this value otherwise just rule out the invalid values 0b0000 | |
| * and 0b1111. | |
| */ | |
| if (sdevice->statustype) { | |
| if (statustype != sdevice->statustype) | |
| return true; | |
| } else { | |
| switch (statustype) { | |
| case 0: | |
| case 0xf: | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static bool siox_device_wdg_error(struct siox_device *sdevice, u8 status_clean) | |
| { | |
| return (status_clean & SIOX_STATUS_WDG) == 0; | |
| } | |
| /* | |
| * If there is a type or counter error the device is called "unsynced". | |
| */ | |
| bool siox_device_synced(struct siox_device *sdevice) | |
| { | |
| if (siox_device_type_error(sdevice, sdevice->status_read_clean)) | |
| return false; | |
| return !siox_device_counter_error(sdevice, sdevice->status_read_clean); | |
| } | |
| EXPORT_SYMBOL_GPL(siox_device_synced); | |
| /* | |
| * A device is called "connected" if it is synced and the watchdog is not | |
| * asserted. | |
| */ | |
| bool siox_device_connected(struct siox_device *sdevice) | |
| { | |
| if (!siox_device_synced(sdevice)) | |
| return false; | |
| return !siox_device_wdg_error(sdevice, sdevice->status_read_clean); | |
| } | |
| EXPORT_SYMBOL_GPL(siox_device_connected); | |
| static void siox_poll(struct siox_master *smaster) | |
| { | |
| struct siox_device *sdevice; | |
| size_t i = smaster->setbuf_len; | |
| unsigned int devno = 0; | |
| int unsync_error = 0; | |
| smaster->last_poll = jiffies; | |
| /* | |
| * The counter bits change in each second cycle, the watchdog bit | |
| * toggles each time. | |
| * The counter bits hold values from [0, 6]. 7 would be possible | |
| * theoretically but the protocol designer considered that a bad idea | |
| * for reasons unknown today. (Maybe that's because then the status read | |
| * back has only zeros in the counter bits then which might be confused | |
| * with a stuck-at-0 error. But for the same reason (with s/0/1/) 0 | |
| * could be skipped.) | |
| */ | |
| if (++smaster->status > 0x0d) | |
| smaster->status = 0; | |
| memset(smaster->buf, 0, smaster->setbuf_len); | |
| /* prepare data pushed out to devices in buf[0..setbuf_len) */ | |
| list_for_each_entry(sdevice, &smaster->devices, node) { | |
| struct siox_driver *sdriver = | |
| to_siox_driver(sdevice->dev.driver); | |
| sdevice->status_written = smaster->status; | |
| i -= sdevice->inbytes; | |
| /* | |
| * If the device or a previous one is unsynced, don't pet the | |
| * watchdog. This is done to ensure that the device is kept in | |
| * reset when something is wrong. | |
| */ | |
| if (!siox_device_synced(sdevice)) | |
| unsync_error = 1; | |
| if (sdriver && !unsync_error) | |
| sdriver->set_data(sdevice, sdevice->status_written, | |
| &smaster->buf[i + 1]); | |
| else | |
| /* | |
| * Don't trigger watchdog if there is no driver or a | |
| * sync problem | |
| */ | |
| sdevice->status_written &= ~SIOX_STATUS_WDG; | |
| smaster->buf[i] = sdevice->status_written; | |
| trace_siox_set_data(smaster, sdevice, devno, i); | |
| devno++; | |
| } | |
| smaster->pushpull(smaster, smaster->setbuf_len, smaster->buf, | |
| smaster->getbuf_len, | |
| smaster->buf + smaster->setbuf_len); | |
| unsync_error = 0; | |
| /* interpret data pulled in from devices in buf[setbuf_len..] */ | |
| devno = 0; | |
| i = smaster->setbuf_len; | |
| list_for_each_entry(sdevice, &smaster->devices, node) { | |
| struct siox_driver *sdriver = | |
| to_siox_driver(sdevice->dev.driver); | |
| u8 status = smaster->buf[i + sdevice->outbytes - 1]; | |
| u8 status_clean; | |
| u8 prev_status_clean = sdevice->status_read_clean; | |
| bool synced = true; | |
| bool connected = true; | |
| if (!siox_device_synced(sdevice)) | |
| unsync_error = 1; | |
| /* | |
| * If the watchdog bit wasn't toggled in this cycle, report the | |
| * watchdog as active to give a consistent view for drivers and | |
| * sysfs consumers. | |
| */ | |
| if (!sdriver || unsync_error) | |
| status &= ~SIOX_STATUS_WDG; | |
| status_clean = | |
| siox_status_clean(status, | |
| sdevice->status_written_lastcycle); | |
| /* Check counter and type bits */ | |
| if (siox_device_counter_error(sdevice, status_clean) || | |
| siox_device_type_error(sdevice, status_clean)) { | |
| bool prev_error; | |
| synced = false; | |
| /* only report a new error if the last cycle was ok */ | |
| prev_error = | |
| siox_device_counter_error(sdevice, | |
| prev_status_clean) || | |
| siox_device_type_error(sdevice, | |
| prev_status_clean); | |
| if (!prev_error) { | |
| sdevice->status_errors++; | |
| sysfs_notify_dirent(sdevice->status_errors_kn); | |
| } | |
| } | |
| /* If the device is unsynced report the watchdog as active */ | |
| if (!synced) { | |
| status &= ~SIOX_STATUS_WDG; | |
| status_clean &= ~SIOX_STATUS_WDG; | |
| } | |
| if (siox_device_wdg_error(sdevice, status_clean)) | |
| connected = false; | |
| /* The watchdog state changed just now */ | |
| if ((status_clean ^ prev_status_clean) & SIOX_STATUS_WDG) { | |
| sysfs_notify_dirent(sdevice->watchdog_kn); | |
| if (siox_device_wdg_error(sdevice, status_clean)) { | |
| struct kernfs_node *wd_errs = | |
| sdevice->watchdog_errors_kn; | |
| sdevice->watchdog_errors++; | |
| sysfs_notify_dirent(wd_errs); | |
| } | |
| } | |
| if (connected != sdevice->connected) | |
| sysfs_notify_dirent(sdevice->connected_kn); | |
| sdevice->status_read_clean = status_clean; | |
| sdevice->status_written_lastcycle = sdevice->status_written; | |
| sdevice->connected = connected; | |
| trace_siox_get_data(smaster, sdevice, devno, status_clean, i); | |
| /* only give data read to driver if the device is connected */ | |
| if (sdriver && connected) | |
| sdriver->get_data(sdevice, &smaster->buf[i]); | |
| devno++; | |
| i += sdevice->outbytes; | |
| } | |
| } | |
| static int siox_poll_thread(void *data) | |
| { | |
| struct siox_master *smaster = data; | |
| signed long timeout = 0; | |
| get_device(&smaster->dev); | |
| for (;;) { | |
| if (kthread_should_stop()) { | |
| put_device(&smaster->dev); | |
| return 0; | |
| } | |
| siox_master_lock(smaster); | |
| if (smaster->active) { | |
| unsigned long next_poll = | |
| smaster->last_poll + smaster->poll_interval; | |
| if (time_is_before_eq_jiffies(next_poll)) | |
| siox_poll(smaster); | |
| timeout = smaster->poll_interval - | |
| (jiffies - smaster->last_poll); | |
| } else { | |
| timeout = MAX_SCHEDULE_TIMEOUT; | |
| } | |
| /* | |
| * Set the task to idle while holding the lock. This makes sure | |
| * that we don't sleep too long when the bus is reenabled before | |
| * schedule_timeout is reached. | |
| */ | |
| if (timeout > 0) | |
| set_current_state(TASK_IDLE); | |
| siox_master_unlock(smaster); | |
| if (timeout > 0) | |
| schedule_timeout(timeout); | |
| /* | |
| * I'm not clear if/why it is important to set the state to | |
| * RUNNING again, but it fixes a "do not call blocking ops when | |
| * !TASK_RUNNING;"-warning. | |
| */ | |
| set_current_state(TASK_RUNNING); | |
| } | |
| } | |
| static int __siox_start(struct siox_master *smaster) | |
| { | |
| if (!(smaster->setbuf_len + smaster->getbuf_len)) | |
| return -ENODEV; | |
| if (!smaster->buf) | |
| return -ENOMEM; | |
| if (smaster->active) | |
| return 0; | |
| smaster->active = 1; | |
| wake_up_process(smaster->poll_thread); | |
| return 1; | |
| } | |
| static int siox_start(struct siox_master *smaster) | |
| { | |
| int ret; | |
| siox_master_lock(smaster); | |
| ret = __siox_start(smaster); | |
| siox_master_unlock(smaster); | |
| return ret; | |
| } | |
| static int __siox_stop(struct siox_master *smaster) | |
| { | |
| if (smaster->active) { | |
| struct siox_device *sdevice; | |
| smaster->active = 0; | |
| list_for_each_entry(sdevice, &smaster->devices, node) { | |
| if (sdevice->connected) | |
| sysfs_notify_dirent(sdevice->connected_kn); | |
| sdevice->connected = false; | |
| } | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int siox_stop(struct siox_master *smaster) | |
| { | |
| int ret; | |
| siox_master_lock(smaster); | |
| ret = __siox_stop(smaster); | |
| siox_master_unlock(smaster); | |
| return ret; | |
| } | |
| static ssize_t type_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| return sprintf(buf, "%s\n", sdev->type); | |
| } | |
| static DEVICE_ATTR_RO(type); | |
| static ssize_t inbytes_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| return sprintf(buf, "%zu\n", sdev->inbytes); | |
| } | |
| static DEVICE_ATTR_RO(inbytes); | |
| static ssize_t outbytes_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| return sprintf(buf, "%zu\n", sdev->outbytes); | |
| } | |
| static DEVICE_ATTR_RO(outbytes); | |
| static ssize_t status_errors_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| unsigned int status_errors; | |
| siox_master_lock(sdev->smaster); | |
| status_errors = sdev->status_errors; | |
| siox_master_unlock(sdev->smaster); | |
| return sprintf(buf, "%u\n", status_errors); | |
| } | |
| static DEVICE_ATTR_RO(status_errors); | |
| static ssize_t connected_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| bool connected; | |
| siox_master_lock(sdev->smaster); | |
| connected = sdev->connected; | |
| siox_master_unlock(sdev->smaster); | |
| return sprintf(buf, "%u\n", connected); | |
| } | |
| static DEVICE_ATTR_RO(connected); | |
| static ssize_t watchdog_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| u8 status; | |
| siox_master_lock(sdev->smaster); | |
| status = sdev->status_read_clean; | |
| siox_master_unlock(sdev->smaster); | |
| return sprintf(buf, "%d\n", status & SIOX_STATUS_WDG); | |
| } | |
| static DEVICE_ATTR_RO(watchdog); | |
| static ssize_t watchdog_errors_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_device *sdev = to_siox_device(dev); | |
| unsigned int watchdog_errors; | |
| siox_master_lock(sdev->smaster); | |
| watchdog_errors = sdev->watchdog_errors; | |
| siox_master_unlock(sdev->smaster); | |
| return sprintf(buf, "%u\n", watchdog_errors); | |
| } | |
| static DEVICE_ATTR_RO(watchdog_errors); | |
| static struct attribute *siox_device_attrs[] = { | |
| &dev_attr_type.attr, | |
| &dev_attr_inbytes.attr, | |
| &dev_attr_outbytes.attr, | |
| &dev_attr_status_errors.attr, | |
| &dev_attr_connected.attr, | |
| &dev_attr_watchdog.attr, | |
| &dev_attr_watchdog_errors.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(siox_device); | |
| static void siox_device_release(struct device *dev) | |
| { | |
| struct siox_device *sdevice = to_siox_device(dev); | |
| kfree(sdevice); | |
| } | |
| static struct device_type siox_device_type = { | |
| .groups = siox_device_groups, | |
| .release = siox_device_release, | |
| }; | |
| static int siox_match(struct device *dev, struct device_driver *drv) | |
| { | |
| if (dev->type != &siox_device_type) | |
| return 0; | |
| /* up to now there is only a single driver so keeping this simple */ | |
| return 1; | |
| } | |
| static struct bus_type siox_bus_type = { | |
| .name = "siox", | |
| .match = siox_match, | |
| }; | |
| static int siox_driver_probe(struct device *dev) | |
| { | |
| struct siox_driver *sdriver = to_siox_driver(dev->driver); | |
| struct siox_device *sdevice = to_siox_device(dev); | |
| int ret; | |
| ret = sdriver->probe(sdevice); | |
| return ret; | |
| } | |
| static int siox_driver_remove(struct device *dev) | |
| { | |
| struct siox_driver *sdriver = | |
| container_of(dev->driver, struct siox_driver, driver); | |
| struct siox_device *sdevice = to_siox_device(dev); | |
| int ret; | |
| ret = sdriver->remove(sdevice); | |
| return ret; | |
| } | |
| static void siox_driver_shutdown(struct device *dev) | |
| { | |
| struct siox_driver *sdriver = | |
| container_of(dev->driver, struct siox_driver, driver); | |
| struct siox_device *sdevice = to_siox_device(dev); | |
| sdriver->shutdown(sdevice); | |
| } | |
| static ssize_t active_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| return sprintf(buf, "%d\n", smaster->active); | |
| } | |
| static ssize_t active_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| int ret; | |
| int active; | |
| ret = kstrtoint(buf, 0, &active); | |
| if (ret < 0) | |
| return ret; | |
| if (active) | |
| ret = siox_start(smaster); | |
| else | |
| ret = siox_stop(smaster); | |
| if (ret < 0) | |
| return ret; | |
| return count; | |
| } | |
| static DEVICE_ATTR_RW(active); | |
| static struct siox_device *siox_device_add(struct siox_master *smaster, | |
| const char *type, size_t inbytes, | |
| size_t outbytes, u8 statustype); | |
| static ssize_t device_add_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| int ret; | |
| char type[20] = ""; | |
| size_t inbytes = 0, outbytes = 0; | |
| u8 statustype = 0; | |
| ret = sscanf(buf, "%19s %zu %zu %hhu", type, &inbytes, | |
| &outbytes, &statustype); | |
| if (ret != 3 && ret != 4) | |
| return -EINVAL; | |
| if (strcmp(type, "siox-12x8") || inbytes != 2 || outbytes != 4) | |
| return -EINVAL; | |
| siox_device_add(smaster, "siox-12x8", inbytes, outbytes, statustype); | |
| return count; | |
| } | |
| static DEVICE_ATTR_WO(device_add); | |
| static void siox_device_remove(struct siox_master *smaster); | |
| static ssize_t device_remove_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| /* XXX? require to write <type> <inbytes> <outbytes> */ | |
| siox_device_remove(smaster); | |
| return count; | |
| } | |
| static DEVICE_ATTR_WO(device_remove); | |
| static ssize_t poll_interval_ns_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| return sprintf(buf, "%lld\n", jiffies_to_nsecs(smaster->poll_interval)); | |
| } | |
| static ssize_t poll_interval_ns_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| int ret; | |
| u64 val; | |
| ret = kstrtou64(buf, 0, &val); | |
| if (ret < 0) | |
| return ret; | |
| siox_master_lock(smaster); | |
| smaster->poll_interval = nsecs_to_jiffies(val); | |
| siox_master_unlock(smaster); | |
| return count; | |
| } | |
| static DEVICE_ATTR_RW(poll_interval_ns); | |
| static struct attribute *siox_master_attrs[] = { | |
| &dev_attr_active.attr, | |
| &dev_attr_device_add.attr, | |
| &dev_attr_device_remove.attr, | |
| &dev_attr_poll_interval_ns.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(siox_master); | |
| static void siox_master_release(struct device *dev) | |
| { | |
| struct siox_master *smaster = to_siox_master(dev); | |
| kfree(smaster); | |
| } | |
| static struct device_type siox_master_type = { | |
| .groups = siox_master_groups, | |
| .release = siox_master_release, | |
| }; | |
| struct siox_master *siox_master_alloc(struct device *dev, | |
| size_t size) | |
| { | |
| struct siox_master *smaster; | |
| if (!dev) | |
| return NULL; | |
| smaster = kzalloc(sizeof(*smaster) + size, GFP_KERNEL); | |
| if (!smaster) | |
| return NULL; | |
| device_initialize(&smaster->dev); | |
| smaster->busno = -1; | |
| smaster->dev.bus = &siox_bus_type; | |
| smaster->dev.type = &siox_master_type; | |
| smaster->dev.parent = dev; | |
| smaster->poll_interval = DIV_ROUND_UP(HZ, 40); | |
| dev_set_drvdata(&smaster->dev, &smaster[1]); | |
| return smaster; | |
| } | |
| EXPORT_SYMBOL_GPL(siox_master_alloc); | |
| int siox_master_register(struct siox_master *smaster) | |
| { | |
| int ret; | |
| if (!siox_is_registered) | |
| return -EPROBE_DEFER; | |
| if (!smaster->pushpull) | |
| return -EINVAL; | |
| dev_set_name(&smaster->dev, "siox-%d", smaster->busno); | |
| mutex_init(&smaster->lock); | |
| INIT_LIST_HEAD(&smaster->devices); | |
| smaster->last_poll = jiffies; | |
| smaster->poll_thread = kthread_run(siox_poll_thread, smaster, | |
| "siox-%d", smaster->busno); | |
| if (IS_ERR(smaster->poll_thread)) { | |
| smaster->active = 0; | |
| return PTR_ERR(smaster->poll_thread); | |
| } | |
| ret = device_add(&smaster->dev); | |
| if (ret) | |
| kthread_stop(smaster->poll_thread); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(siox_master_register); | |
| void siox_master_unregister(struct siox_master *smaster) | |
| { | |
| /* remove device */ | |
| device_del(&smaster->dev); | |
| siox_master_lock(smaster); | |
| __siox_stop(smaster); | |
| while (smaster->num_devices) { | |
| struct siox_device *sdevice; | |
| sdevice = container_of(smaster->devices.prev, | |
| struct siox_device, node); | |
| list_del(&sdevice->node); | |
| smaster->num_devices--; | |
| siox_master_unlock(smaster); | |
| device_unregister(&sdevice->dev); | |
| siox_master_lock(smaster); | |
| } | |
| siox_master_unlock(smaster); | |
| put_device(&smaster->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(siox_master_unregister); | |
| static struct siox_device *siox_device_add(struct siox_master *smaster, | |
| const char *type, size_t inbytes, | |
| size_t outbytes, u8 statustype) | |
| { | |
| struct siox_device *sdevice; | |
| int ret; | |
| size_t buf_len; | |
| sdevice = kzalloc(sizeof(*sdevice), GFP_KERNEL); | |
| if (!sdevice) | |
| return ERR_PTR(-ENOMEM); | |
| sdevice->type = type; | |
| sdevice->inbytes = inbytes; | |
| sdevice->outbytes = outbytes; | |
| sdevice->statustype = statustype; | |
| sdevice->smaster = smaster; | |
| sdevice->dev.parent = &smaster->dev; | |
| sdevice->dev.bus = &siox_bus_type; | |
| sdevice->dev.type = &siox_device_type; | |
| siox_master_lock(smaster); | |
| dev_set_name(&sdevice->dev, "siox-%d-%d", | |
| smaster->busno, smaster->num_devices); | |
| buf_len = smaster->setbuf_len + inbytes + | |
| smaster->getbuf_len + outbytes; | |
| if (smaster->buf_len < buf_len) { | |
| u8 *buf = krealloc(smaster->buf, buf_len, GFP_KERNEL); | |
| if (!buf) { | |
| dev_err(&smaster->dev, | |
| "failed to realloc buffer to %zu\n", buf_len); | |
| ret = -ENOMEM; | |
| goto err_buf_alloc; | |
| } | |
| smaster->buf_len = buf_len; | |
| smaster->buf = buf; | |
| } | |
| ret = device_register(&sdevice->dev); | |
| if (ret) { | |
| dev_err(&smaster->dev, "failed to register device: %d\n", ret); | |
| goto err_device_register; | |
| } | |
| smaster->num_devices++; | |
| list_add_tail(&sdevice->node, &smaster->devices); | |
| smaster->setbuf_len += sdevice->inbytes; | |
| smaster->getbuf_len += sdevice->outbytes; | |
| sdevice->status_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | |
| "status_errors"); | |
| sdevice->watchdog_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | |
| "watchdog"); | |
| sdevice->watchdog_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | |
| "watchdog_errors"); | |
| sdevice->connected_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | |
| "connected"); | |
| siox_master_unlock(smaster); | |
| return sdevice; | |
| err_device_register: | |
| /* don't care to make the buffer smaller again */ | |
| err_buf_alloc: | |
| siox_master_unlock(smaster); | |
| kfree(sdevice); | |
| return ERR_PTR(ret); | |
| } | |
| static void siox_device_remove(struct siox_master *smaster) | |
| { | |
| struct siox_device *sdevice; | |
| siox_master_lock(smaster); | |
| if (!smaster->num_devices) { | |
| siox_master_unlock(smaster); | |
| return; | |
| } | |
| sdevice = container_of(smaster->devices.prev, struct siox_device, node); | |
| list_del(&sdevice->node); | |
| smaster->num_devices--; | |
| smaster->setbuf_len -= sdevice->inbytes; | |
| smaster->getbuf_len -= sdevice->outbytes; | |
| if (!smaster->num_devices) | |
| __siox_stop(smaster); | |
| siox_master_unlock(smaster); | |
| /* | |
| * This must be done without holding the master lock because we're | |
| * called from device_remove_store which also holds a sysfs mutex. | |
| * device_unregister tries to aquire the same lock. | |
| */ | |
| device_unregister(&sdevice->dev); | |
| } | |
| int __siox_driver_register(struct siox_driver *sdriver, struct module *owner) | |
| { | |
| int ret; | |
| if (unlikely(!siox_is_registered)) | |
| return -EPROBE_DEFER; | |
| if (!sdriver->set_data && !sdriver->get_data) { | |
| pr_err("Driver %s doesn't provide needed callbacks\n", | |
| sdriver->driver.name); | |
| return -EINVAL; | |
| } | |
| sdriver->driver.owner = owner; | |
| sdriver->driver.bus = &siox_bus_type; | |
| if (sdriver->probe) | |
| sdriver->driver.probe = siox_driver_probe; | |
| if (sdriver->remove) | |
| sdriver->driver.remove = siox_driver_remove; | |
| if (sdriver->shutdown) | |
| sdriver->driver.shutdown = siox_driver_shutdown; | |
| ret = driver_register(&sdriver->driver); | |
| if (ret) | |
| pr_err("Failed to register siox driver %s (%d)\n", | |
| sdriver->driver.name, ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__siox_driver_register); | |
| static int __init siox_init(void) | |
| { | |
| int ret; | |
| ret = bus_register(&siox_bus_type); | |
| if (ret) { | |
| pr_err("Registration of SIOX bus type failed: %d\n", ret); | |
| return ret; | |
| } | |
| siox_is_registered = true; | |
| return 0; | |
| } | |
| subsys_initcall(siox_init); | |
| static void __exit siox_exit(void) | |
| { | |
| bus_unregister(&siox_bus_type); | |
| } | |
| module_exit(siox_exit); | |
| MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); | |
| MODULE_DESCRIPTION("Eckelmann SIOX driver core"); | |
| MODULE_LICENSE("GPL v2"); |