| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Released under the GPLv2 only. | |
| */ | |
| #include <linux/usb.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/hcd.h> | |
| #include <linux/usb/quirks.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/device.h> | |
| #include <asm/byteorder.h> | |
| #include "usb.h" | |
| #define USB_MAXALTSETTING 128 /* Hard limit */ | |
| #define USB_MAXCONFIG 8 /* Arbitrary limit */ | |
| static inline const char *plural(int n) | |
| { | |
| return (n == 1 ? "" : "s"); | |
| } | |
| static int find_next_descriptor(unsigned char *buffer, int size, | |
| int dt1, int dt2, int *num_skipped) | |
| { | |
| struct usb_descriptor_header *h; | |
| int n = 0; | |
| unsigned char *buffer0 = buffer; | |
| /* Find the next descriptor of type dt1 or dt2 */ | |
| while (size > 0) { | |
| h = (struct usb_descriptor_header *) buffer; | |
| if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2) | |
| break; | |
| buffer += h->bLength; | |
| size -= h->bLength; | |
| ++n; | |
| } | |
| /* Store the number of descriptors skipped and return the | |
| * number of bytes skipped */ | |
| if (num_skipped) | |
| *num_skipped = n; | |
| return buffer - buffer0; | |
| } | |
| static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev, | |
| int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, | |
| unsigned char *buffer, int size) | |
| { | |
| struct usb_ssp_isoc_ep_comp_descriptor *desc; | |
| /* | |
| * The SuperSpeedPlus Isoc endpoint companion descriptor immediately | |
| * follows the SuperSpeed Endpoint Companion descriptor | |
| */ | |
| desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer; | |
| if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP || | |
| size < USB_DT_SSP_ISOC_EP_COMP_SIZE) { | |
| dev_warn(ddev, "Invalid SuperSpeedPlus isoc endpoint companion" | |
| "for config %d interface %d altsetting %d ep %d.\n", | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| return; | |
| } | |
| memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE); | |
| } | |
| static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, | |
| int inum, int asnum, struct usb_host_endpoint *ep, | |
| unsigned char *buffer, int size) | |
| { | |
| struct usb_ss_ep_comp_descriptor *desc; | |
| int max_tx; | |
| /* The SuperSpeed endpoint companion descriptor is supposed to | |
| * be the first thing immediately following the endpoint descriptor. | |
| */ | |
| desc = (struct usb_ss_ep_comp_descriptor *) buffer; | |
| if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP || | |
| size < USB_DT_SS_EP_COMP_SIZE) { | |
| dev_warn(ddev, "No SuperSpeed endpoint companion for config %d " | |
| " interface %d altsetting %d ep %d: " | |
| "using minimum values\n", | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| /* Fill in some default values. | |
| * Leave bmAttributes as zero, which will mean no streams for | |
| * bulk, and isoc won't support multiple bursts of packets. | |
| * With bursts of only one packet, and a Mult of 1, the max | |
| * amount of data moved per endpoint service interval is one | |
| * packet. | |
| */ | |
| ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE; | |
| ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; | |
| if (usb_endpoint_xfer_isoc(&ep->desc) || | |
| usb_endpoint_xfer_int(&ep->desc)) | |
| ep->ss_ep_comp.wBytesPerInterval = | |
| ep->desc.wMaxPacketSize; | |
| return; | |
| } | |
| buffer += desc->bLength; | |
| size -= desc->bLength; | |
| memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE); | |
| /* Check the various values */ | |
| if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) { | |
| dev_warn(ddev, "Control endpoint with bMaxBurst = %d in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to zero\n", desc->bMaxBurst, | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| ep->ss_ep_comp.bMaxBurst = 0; | |
| } else if (desc->bMaxBurst > 15) { | |
| dev_warn(ddev, "Endpoint with bMaxBurst = %d in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to 15\n", desc->bMaxBurst, | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| ep->ss_ep_comp.bMaxBurst = 15; | |
| } | |
| if ((usb_endpoint_xfer_control(&ep->desc) || | |
| usb_endpoint_xfer_int(&ep->desc)) && | |
| desc->bmAttributes != 0) { | |
| dev_warn(ddev, "%s endpoint with bmAttributes = %d in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to zero\n", | |
| usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk", | |
| desc->bmAttributes, | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| ep->ss_ep_comp.bmAttributes = 0; | |
| } else if (usb_endpoint_xfer_bulk(&ep->desc) && | |
| desc->bmAttributes > 16) { | |
| dev_warn(ddev, "Bulk endpoint with more than 65536 streams in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to max\n", | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| ep->ss_ep_comp.bmAttributes = 16; | |
| } else if (usb_endpoint_xfer_isoc(&ep->desc) && | |
| !USB_SS_SSP_ISOC_COMP(desc->bmAttributes) && | |
| USB_SS_MULT(desc->bmAttributes) > 3) { | |
| dev_warn(ddev, "Isoc endpoint has Mult of %d in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to 3\n", | |
| USB_SS_MULT(desc->bmAttributes), | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress); | |
| ep->ss_ep_comp.bmAttributes = 2; | |
| } | |
| if (usb_endpoint_xfer_isoc(&ep->desc)) | |
| max_tx = (desc->bMaxBurst + 1) * | |
| (USB_SS_MULT(desc->bmAttributes)) * | |
| usb_endpoint_maxp(&ep->desc); | |
| else if (usb_endpoint_xfer_int(&ep->desc)) | |
| max_tx = usb_endpoint_maxp(&ep->desc) * | |
| (desc->bMaxBurst + 1); | |
| else | |
| max_tx = 999999; | |
| if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) { | |
| dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in " | |
| "config %d interface %d altsetting %d ep %d: " | |
| "setting to %d\n", | |
| usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int", | |
| le16_to_cpu(desc->wBytesPerInterval), | |
| cfgno, inum, asnum, ep->desc.bEndpointAddress, | |
| max_tx); | |
| ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx); | |
| } | |
| /* Parse a possible SuperSpeedPlus isoc ep companion descriptor */ | |
| if (usb_endpoint_xfer_isoc(&ep->desc) && | |
| USB_SS_SSP_ISOC_COMP(desc->bmAttributes)) | |
| usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum, | |
| ep, buffer, size); | |
| } | |
| static const unsigned short low_speed_maxpacket_maxes[4] = { | |
| [USB_ENDPOINT_XFER_CONTROL] = 8, | |
| [USB_ENDPOINT_XFER_ISOC] = 0, | |
| [USB_ENDPOINT_XFER_BULK] = 0, | |
| [USB_ENDPOINT_XFER_INT] = 8, | |
| }; | |
| static const unsigned short full_speed_maxpacket_maxes[4] = { | |
| [USB_ENDPOINT_XFER_CONTROL] = 64, | |
| [USB_ENDPOINT_XFER_ISOC] = 1023, | |
| [USB_ENDPOINT_XFER_BULK] = 64, | |
| [USB_ENDPOINT_XFER_INT] = 64, | |
| }; | |
| static const unsigned short high_speed_maxpacket_maxes[4] = { | |
| [USB_ENDPOINT_XFER_CONTROL] = 64, | |
| [USB_ENDPOINT_XFER_ISOC] = 1024, | |
| /* Bulk should be 512, but some devices use 1024: we will warn below */ | |
| [USB_ENDPOINT_XFER_BULK] = 1024, | |
| [USB_ENDPOINT_XFER_INT] = 1024, | |
| }; | |
| static const unsigned short super_speed_maxpacket_maxes[4] = { | |
| [USB_ENDPOINT_XFER_CONTROL] = 512, | |
| [USB_ENDPOINT_XFER_ISOC] = 1024, | |
| [USB_ENDPOINT_XFER_BULK] = 1024, | |
| [USB_ENDPOINT_XFER_INT] = 1024, | |
| }; | |
| static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, | |
| int asnum, struct usb_host_interface *ifp, int num_ep, | |
| unsigned char *buffer, int size) | |
| { | |
| unsigned char *buffer0 = buffer; | |
| struct usb_endpoint_descriptor *d; | |
| struct usb_host_endpoint *endpoint; | |
| int n, i, j, retval; | |
| unsigned int maxp; | |
| const unsigned short *maxpacket_maxes; | |
| d = (struct usb_endpoint_descriptor *) buffer; | |
| buffer += d->bLength; | |
| size -= d->bLength; | |
| if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE) | |
| n = USB_DT_ENDPOINT_AUDIO_SIZE; | |
| else if (d->bLength >= USB_DT_ENDPOINT_SIZE) | |
| n = USB_DT_ENDPOINT_SIZE; | |
| else { | |
| dev_warn(ddev, "config %d interface %d altsetting %d has an " | |
| "invalid endpoint descriptor of length %d, skipping\n", | |
| cfgno, inum, asnum, d->bLength); | |
| goto skip_to_next_endpoint_or_interface_descriptor; | |
| } | |
| i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK; | |
| if (i >= 16 || i == 0) { | |
| dev_warn(ddev, "config %d interface %d altsetting %d has an " | |
| "invalid endpoint with address 0x%X, skipping\n", | |
| cfgno, inum, asnum, d->bEndpointAddress); | |
| goto skip_to_next_endpoint_or_interface_descriptor; | |
| } | |
| /* Only store as many endpoints as we have room for */ | |
| if (ifp->desc.bNumEndpoints >= num_ep) | |
| goto skip_to_next_endpoint_or_interface_descriptor; | |
| /* Check for duplicate endpoint addresses */ | |
| for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { | |
| if (ifp->endpoint[i].desc.bEndpointAddress == | |
| d->bEndpointAddress) { | |
| dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", | |
| cfgno, inum, asnum, d->bEndpointAddress); | |
| goto skip_to_next_endpoint_or_interface_descriptor; | |
| } | |
| } | |
| endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; | |
| ++ifp->desc.bNumEndpoints; | |
| memcpy(&endpoint->desc, d, n); | |
| INIT_LIST_HEAD(&endpoint->urb_list); | |
| /* | |
| * Fix up bInterval values outside the legal range. | |
| * Use 10 or 8 ms if no proper value can be guessed. | |
| */ | |
| i = 0; /* i = min, j = max, n = default */ | |
| j = 255; | |
| if (usb_endpoint_xfer_int(d)) { | |
| i = 1; | |
| switch (to_usb_device(ddev)->speed) { | |
| case USB_SPEED_SUPER_PLUS: | |
| case USB_SPEED_SUPER: | |
| case USB_SPEED_HIGH: | |
| /* | |
| * Many device manufacturers are using full-speed | |
| * bInterval values in high-speed interrupt endpoint | |
| * descriptors. Try to fix those and fall back to an | |
| * 8-ms default value otherwise. | |
| */ | |
| n = fls(d->bInterval*8); | |
| if (n == 0) | |
| n = 7; /* 8 ms = 2^(7-1) uframes */ | |
| j = 16; | |
| /* | |
| * Adjust bInterval for quirked devices. | |
| */ | |
| /* | |
| * This quirk fixes bIntervals reported in ms. | |
| */ | |
| if (to_usb_device(ddev)->quirks & | |
| USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) { | |
| n = clamp(fls(d->bInterval) + 3, i, j); | |
| i = j = n; | |
| } | |
| /* | |
| * This quirk fixes bIntervals reported in | |
| * linear microframes. | |
| */ | |
| if (to_usb_device(ddev)->quirks & | |
| USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) { | |
| n = clamp(fls(d->bInterval), i, j); | |
| i = j = n; | |
| } | |
| break; | |
| default: /* USB_SPEED_FULL or _LOW */ | |
| /* | |
| * For low-speed, 10 ms is the official minimum. | |
| * But some "overclocked" devices might want faster | |
| * polling so we'll allow it. | |
| */ | |
| n = 10; | |
| break; | |
| } | |
| } else if (usb_endpoint_xfer_isoc(d)) { | |
| i = 1; | |
| j = 16; | |
| switch (to_usb_device(ddev)->speed) { | |
| case USB_SPEED_HIGH: | |
| n = 7; /* 8 ms = 2^(7-1) uframes */ | |
| break; | |
| default: /* USB_SPEED_FULL */ | |
| n = 4; /* 8 ms = 2^(4-1) frames */ | |
| break; | |
| } | |
| } | |
| if (d->bInterval < i || d->bInterval > j) { | |
| dev_warn(ddev, "config %d interface %d altsetting %d " | |
| "endpoint 0x%X has an invalid bInterval %d, " | |
| "changing to %d\n", | |
| cfgno, inum, asnum, | |
| d->bEndpointAddress, d->bInterval, n); | |
| endpoint->desc.bInterval = n; | |
| } | |
| /* Some buggy low-speed devices have Bulk endpoints, which is | |
| * explicitly forbidden by the USB spec. In an attempt to make | |
| * them usable, we will try treating them as Interrupt endpoints. | |
| */ | |
| if (to_usb_device(ddev)->speed == USB_SPEED_LOW && | |
| usb_endpoint_xfer_bulk(d)) { | |
| dev_warn(ddev, "config %d interface %d altsetting %d " | |
| "endpoint 0x%X is Bulk; changing to Interrupt\n", | |
| cfgno, inum, asnum, d->bEndpointAddress); | |
| endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; | |
| endpoint->desc.bInterval = 1; | |
| if (usb_endpoint_maxp(&endpoint->desc) > 8) | |
| endpoint->desc.wMaxPacketSize = cpu_to_le16(8); | |
| } | |
| /* Validate the wMaxPacketSize field */ | |
| maxp = usb_endpoint_maxp(&endpoint->desc); | |
| /* Find the highest legal maxpacket size for this endpoint */ | |
| i = 0; /* additional transactions per microframe */ | |
| switch (to_usb_device(ddev)->speed) { | |
| case USB_SPEED_LOW: | |
| maxpacket_maxes = low_speed_maxpacket_maxes; | |
| break; | |
| case USB_SPEED_FULL: | |
| maxpacket_maxes = full_speed_maxpacket_maxes; | |
| break; | |
| case USB_SPEED_HIGH: | |
| /* Bits 12..11 are allowed only for HS periodic endpoints */ | |
| if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { | |
| i = maxp & (BIT(12) | BIT(11)); | |
| maxp &= ~i; | |
| } | |
| /* fallthrough */ | |
| default: | |
| maxpacket_maxes = high_speed_maxpacket_maxes; | |
| break; | |
| case USB_SPEED_SUPER: | |
| case USB_SPEED_SUPER_PLUS: | |
| maxpacket_maxes = super_speed_maxpacket_maxes; | |
| break; | |
| } | |
| j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; | |
| if (maxp > j) { | |
| dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", | |
| cfgno, inum, asnum, d->bEndpointAddress, maxp, j); | |
| maxp = j; | |
| endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); | |
| } | |
| /* | |
| * Some buggy high speed devices have bulk endpoints using | |
| * maxpacket sizes other than 512. High speed HCDs may not | |
| * be able to handle that particular bug, so let's warn... | |
| */ | |
| if (to_usb_device(ddev)->speed == USB_SPEED_HIGH | |
| && usb_endpoint_xfer_bulk(d)) { | |
| if (maxp != 512) | |
| dev_warn(ddev, "config %d interface %d altsetting %d " | |
| "bulk endpoint 0x%X has invalid maxpacket %d\n", | |
| cfgno, inum, asnum, d->bEndpointAddress, | |
| maxp); | |
| } | |
| /* Parse a possible SuperSpeed endpoint companion descriptor */ | |
| if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER) | |
| usb_parse_ss_endpoint_companion(ddev, cfgno, | |
| inum, asnum, endpoint, buffer, size); | |
| /* Skip over any Class Specific or Vendor Specific descriptors; | |
| * find the next endpoint or interface descriptor */ | |
| endpoint->extra = buffer; | |
| i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | |
| USB_DT_INTERFACE, &n); | |
| endpoint->extralen = i; | |
| retval = buffer - buffer0 + i; | |
| if (n > 0) | |
| dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | |
| n, plural(n), "endpoint"); | |
| return retval; | |
| skip_to_next_endpoint_or_interface_descriptor: | |
| i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | |
| USB_DT_INTERFACE, NULL); | |
| return buffer - buffer0 + i; | |
| } | |
| void usb_release_interface_cache(struct kref *ref) | |
| { | |
| struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); | |
| int j; | |
| for (j = 0; j < intfc->num_altsetting; j++) { | |
| struct usb_host_interface *alt = &intfc->altsetting[j]; | |
| kfree(alt->endpoint); | |
| kfree(alt->string); | |
| } | |
| kfree(intfc); | |
| } | |
| static int usb_parse_interface(struct device *ddev, int cfgno, | |
| struct usb_host_config *config, unsigned char *buffer, int size, | |
| u8 inums[], u8 nalts[]) | |
| { | |
| unsigned char *buffer0 = buffer; | |
| struct usb_interface_descriptor *d; | |
| int inum, asnum; | |
| struct usb_interface_cache *intfc; | |
| struct usb_host_interface *alt; | |
| int i, n; | |
| int len, retval; | |
| int num_ep, num_ep_orig; | |
| d = (struct usb_interface_descriptor *) buffer; | |
| buffer += d->bLength; | |
| size -= d->bLength; | |
| if (d->bLength < USB_DT_INTERFACE_SIZE) | |
| goto skip_to_next_interface_descriptor; | |
| /* Which interface entry is this? */ | |
| intfc = NULL; | |
| inum = d->bInterfaceNumber; | |
| for (i = 0; i < config->desc.bNumInterfaces; ++i) { | |
| if (inums[i] == inum) { | |
| intfc = config->intf_cache[i]; | |
| break; | |
| } | |
| } | |
| if (!intfc || intfc->num_altsetting >= nalts[i]) | |
| goto skip_to_next_interface_descriptor; | |
| /* Check for duplicate altsetting entries */ | |
| asnum = d->bAlternateSetting; | |
| for ((i = 0, alt = &intfc->altsetting[0]); | |
| i < intfc->num_altsetting; | |
| (++i, ++alt)) { | |
| if (alt->desc.bAlternateSetting == asnum) { | |
| dev_warn(ddev, "Duplicate descriptor for config %d " | |
| "interface %d altsetting %d, skipping\n", | |
| cfgno, inum, asnum); | |
| goto skip_to_next_interface_descriptor; | |
| } | |
| } | |
| ++intfc->num_altsetting; | |
| memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE); | |
| /* Skip over any Class Specific or Vendor Specific descriptors; | |
| * find the first endpoint or interface descriptor */ | |
| alt->extra = buffer; | |
| i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | |
| USB_DT_INTERFACE, &n); | |
| alt->extralen = i; | |
| if (n > 0) | |
| dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | |
| n, plural(n), "interface"); | |
| buffer += i; | |
| size -= i; | |
| /* Allocate space for the right(?) number of endpoints */ | |
| num_ep = num_ep_orig = alt->desc.bNumEndpoints; | |
| alt->desc.bNumEndpoints = 0; /* Use as a counter */ | |
| if (num_ep > USB_MAXENDPOINTS) { | |
| dev_warn(ddev, "too many endpoints for config %d interface %d " | |
| "altsetting %d: %d, using maximum allowed: %d\n", | |
| cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS); | |
| num_ep = USB_MAXENDPOINTS; | |
| } | |
| if (num_ep > 0) { | |
| /* Can't allocate 0 bytes */ | |
| len = sizeof(struct usb_host_endpoint) * num_ep; | |
| alt->endpoint = kzalloc(len, GFP_KERNEL); | |
| if (!alt->endpoint) | |
| return -ENOMEM; | |
| } | |
| /* Parse all the endpoint descriptors */ | |
| n = 0; | |
| while (size > 0) { | |
| if (((struct usb_descriptor_header *) buffer)->bDescriptorType | |
| == USB_DT_INTERFACE) | |
| break; | |
| retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt, | |
| num_ep, buffer, size); | |
| if (retval < 0) | |
| return retval; | |
| ++n; | |
| buffer += retval; | |
| size -= retval; | |
| } | |
| if (n != num_ep_orig) | |
| dev_warn(ddev, "config %d interface %d altsetting %d has %d " | |
| "endpoint descriptor%s, different from the interface " | |
| "descriptor's value: %d\n", | |
| cfgno, inum, asnum, n, plural(n), num_ep_orig); | |
| return buffer - buffer0; | |
| skip_to_next_interface_descriptor: | |
| i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | |
| USB_DT_INTERFACE, NULL); | |
| return buffer - buffer0 + i; | |
| } | |
| static int usb_parse_configuration(struct usb_device *dev, int cfgidx, | |
| struct usb_host_config *config, unsigned char *buffer, int size) | |
| { | |
| struct device *ddev = &dev->dev; | |
| unsigned char *buffer0 = buffer; | |
| int cfgno; | |
| int nintf, nintf_orig; | |
| int i, j, n; | |
| struct usb_interface_cache *intfc; | |
| unsigned char *buffer2; | |
| int size2; | |
| struct usb_descriptor_header *header; | |
| int retval; | |
| u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES]; | |
| unsigned iad_num = 0; | |
| memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); | |
| nintf = nintf_orig = config->desc.bNumInterfaces; | |
| config->desc.bNumInterfaces = 0; // Adjusted later | |
| if (config->desc.bDescriptorType != USB_DT_CONFIG || | |
| config->desc.bLength < USB_DT_CONFIG_SIZE || | |
| config->desc.bLength > size) { | |
| dev_err(ddev, "invalid descriptor for config index %d: " | |
| "type = 0x%X, length = %d\n", cfgidx, | |
| config->desc.bDescriptorType, config->desc.bLength); | |
| return -EINVAL; | |
| } | |
| cfgno = config->desc.bConfigurationValue; | |
| buffer += config->desc.bLength; | |
| size -= config->desc.bLength; | |
| if (nintf > USB_MAXINTERFACES) { | |
| dev_warn(ddev, "config %d has too many interfaces: %d, " | |
| "using maximum allowed: %d\n", | |
| cfgno, nintf, USB_MAXINTERFACES); | |
| nintf = USB_MAXINTERFACES; | |
| } | |
| /* Go through the descriptors, checking their length and counting the | |
| * number of altsettings for each interface */ | |
| n = 0; | |
| for ((buffer2 = buffer, size2 = size); | |
| size2 > 0; | |
| (buffer2 += header->bLength, size2 -= header->bLength)) { | |
| if (size2 < sizeof(struct usb_descriptor_header)) { | |
| dev_warn(ddev, "config %d descriptor has %d excess " | |
| "byte%s, ignoring\n", | |
| cfgno, size2, plural(size2)); | |
| break; | |
| } | |
| header = (struct usb_descriptor_header *) buffer2; | |
| if ((header->bLength > size2) || (header->bLength < 2)) { | |
| dev_warn(ddev, "config %d has an invalid descriptor " | |
| "of length %d, skipping remainder of the config\n", | |
| cfgno, header->bLength); | |
| break; | |
| } | |
| if (header->bDescriptorType == USB_DT_INTERFACE) { | |
| struct usb_interface_descriptor *d; | |
| int inum; | |
| d = (struct usb_interface_descriptor *) header; | |
| if (d->bLength < USB_DT_INTERFACE_SIZE) { | |
| dev_warn(ddev, "config %d has an invalid " | |
| "interface descriptor of length %d, " | |
| "skipping\n", cfgno, d->bLength); | |
| continue; | |
| } | |
| inum = d->bInterfaceNumber; | |
| if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) && | |
| n >= nintf_orig) { | |
| dev_warn(ddev, "config %d has more interface " | |
| "descriptors, than it declares in " | |
| "bNumInterfaces, ignoring interface " | |
| "number: %d\n", cfgno, inum); | |
| continue; | |
| } | |
| if (inum >= nintf_orig) | |
| dev_warn(ddev, "config %d has an invalid " | |
| "interface number: %d but max is %d\n", | |
| cfgno, inum, nintf_orig - 1); | |
| /* Have we already encountered this interface? | |
| * Count its altsettings */ | |
| for (i = 0; i < n; ++i) { | |
| if (inums[i] == inum) | |
| break; | |
| } | |
| if (i < n) { | |
| if (nalts[i] < 255) | |
| ++nalts[i]; | |
| } else if (n < USB_MAXINTERFACES) { | |
| inums[n] = inum; | |
| nalts[n] = 1; | |
| ++n; | |
| } | |
| } else if (header->bDescriptorType == | |
| USB_DT_INTERFACE_ASSOCIATION) { | |
| struct usb_interface_assoc_descriptor *d; | |
| d = (struct usb_interface_assoc_descriptor *)header; | |
| if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) { | |
| dev_warn(ddev, | |
| "config %d has an invalid interface association descriptor of length %d, skipping\n", | |
| cfgno, d->bLength); | |
| continue; | |
| } | |
| if (iad_num == USB_MAXIADS) { | |
| dev_warn(ddev, "found more Interface " | |
| "Association Descriptors " | |
| "than allocated for in " | |
| "configuration %d\n", cfgno); | |
| } else { | |
| config->intf_assoc[iad_num] = d; | |
| iad_num++; | |
| } | |
| } else if (header->bDescriptorType == USB_DT_DEVICE || | |
| header->bDescriptorType == USB_DT_CONFIG) | |
| dev_warn(ddev, "config %d contains an unexpected " | |
| "descriptor of type 0x%X, skipping\n", | |
| cfgno, header->bDescriptorType); | |
| } /* for ((buffer2 = buffer, size2 = size); ...) */ | |
| size = buffer2 - buffer; | |
| config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0); | |
| if (n != nintf) | |
| dev_warn(ddev, "config %d has %d interface%s, different from " | |
| "the descriptor's value: %d\n", | |
| cfgno, n, plural(n), nintf_orig); | |
| else if (n == 0) | |
| dev_warn(ddev, "config %d has no interfaces?\n", cfgno); | |
| config->desc.bNumInterfaces = nintf = n; | |
| /* Check for missing interface numbers */ | |
| for (i = 0; i < nintf; ++i) { | |
| for (j = 0; j < nintf; ++j) { | |
| if (inums[j] == i) | |
| break; | |
| } | |
| if (j >= nintf) | |
| dev_warn(ddev, "config %d has no interface number " | |
| "%d\n", cfgno, i); | |
| } | |
| /* Allocate the usb_interface_caches and altsetting arrays */ | |
| for (i = 0; i < nintf; ++i) { | |
| j = nalts[i]; | |
| if (j > USB_MAXALTSETTING) { | |
| dev_warn(ddev, "too many alternate settings for " | |
| "config %d interface %d: %d, " | |
| "using maximum allowed: %d\n", | |
| cfgno, inums[i], j, USB_MAXALTSETTING); | |
| nalts[i] = j = USB_MAXALTSETTING; | |
| } | |
| intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL); | |
| config->intf_cache[i] = intfc; | |
| if (!intfc) | |
| return -ENOMEM; | |
| kref_init(&intfc->ref); | |
| } | |
| /* FIXME: parse the BOS descriptor */ | |
| /* Skip over any Class Specific or Vendor Specific descriptors; | |
| * find the first interface descriptor */ | |
| config->extra = buffer; | |
| i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | |
| USB_DT_INTERFACE, &n); | |
| config->extralen = i; | |
| if (n > 0) | |
| dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | |
| n, plural(n), "configuration"); | |
| buffer += i; | |
| size -= i; | |
| /* Parse all the interface/altsetting descriptors */ | |
| while (size > 0) { | |
| retval = usb_parse_interface(ddev, cfgno, config, | |
| buffer, size, inums, nalts); | |
| if (retval < 0) | |
| return retval; | |
| buffer += retval; | |
| size -= retval; | |
| } | |
| /* Check for missing altsettings */ | |
| for (i = 0; i < nintf; ++i) { | |
| intfc = config->intf_cache[i]; | |
| for (j = 0; j < intfc->num_altsetting; ++j) { | |
| for (n = 0; n < intfc->num_altsetting; ++n) { | |
| if (intfc->altsetting[n].desc. | |
| bAlternateSetting == j) | |
| break; | |
| } | |
| if (n >= intfc->num_altsetting) | |
| dev_warn(ddev, "config %d interface %d has no " | |
| "altsetting %d\n", cfgno, inums[i], j); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* hub-only!! ... and only exported for reset/reinit path. | |
| * otherwise used internally on disconnect/destroy path | |
| */ | |
| void usb_destroy_configuration(struct usb_device *dev) | |
| { | |
| int c, i; | |
| if (!dev->config) | |
| return; | |
| if (dev->rawdescriptors) { | |
| for (i = 0; i < dev->descriptor.bNumConfigurations; i++) | |
| kfree(dev->rawdescriptors[i]); | |
| kfree(dev->rawdescriptors); | |
| dev->rawdescriptors = NULL; | |
| } | |
| for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { | |
| struct usb_host_config *cf = &dev->config[c]; | |
| kfree(cf->string); | |
| for (i = 0; i < cf->desc.bNumInterfaces; i++) { | |
| if (cf->intf_cache[i]) | |
| kref_put(&cf->intf_cache[i]->ref, | |
| usb_release_interface_cache); | |
| } | |
| } | |
| kfree(dev->config); | |
| dev->config = NULL; | |
| } | |
| /* | |
| * Get the USB config descriptors, cache and parse'em | |
| * | |
| * hub-only!! ... and only in reset path, or usb_new_device() | |
| * (used by real hubs and virtual root hubs) | |
| */ | |
| int usb_get_configuration(struct usb_device *dev) | |
| { | |
| struct device *ddev = &dev->dev; | |
| int ncfg = dev->descriptor.bNumConfigurations; | |
| int result = -ENOMEM; | |
| unsigned int cfgno, length; | |
| unsigned char *bigbuffer; | |
| struct usb_config_descriptor *desc; | |
| if (ncfg > USB_MAXCONFIG) { | |
| dev_warn(ddev, "too many configurations: %d, " | |
| "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG); | |
| dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG; | |
| } | |
| if (ncfg < 1) { | |
| dev_err(ddev, "no configurations\n"); | |
| return -EINVAL; | |
| } | |
| length = ncfg * sizeof(struct usb_host_config); | |
| dev->config = kzalloc(length, GFP_KERNEL); | |
| if (!dev->config) | |
| goto err2; | |
| length = ncfg * sizeof(char *); | |
| dev->rawdescriptors = kzalloc(length, GFP_KERNEL); | |
| if (!dev->rawdescriptors) | |
| goto err2; | |
| desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); | |
| if (!desc) | |
| goto err2; | |
| for (cfgno = 0; cfgno < ncfg; cfgno++) { | |
| /* We grab just the first descriptor so we know how long | |
| * the whole configuration is */ | |
| result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | |
| desc, USB_DT_CONFIG_SIZE); | |
| if (result < 0) { | |
| dev_err(ddev, "unable to read config index %d " | |
| "descriptor/%s: %d\n", cfgno, "start", result); | |
| if (result != -EPIPE) | |
| goto err; | |
| dev_err(ddev, "chopping to %d config(s)\n", cfgno); | |
| dev->descriptor.bNumConfigurations = cfgno; | |
| break; | |
| } else if (result < 4) { | |
| dev_err(ddev, "config index %d descriptor too short " | |
| "(expected %i, got %i)\n", cfgno, | |
| USB_DT_CONFIG_SIZE, result); | |
| result = -EINVAL; | |
| goto err; | |
| } | |
| length = max((int) le16_to_cpu(desc->wTotalLength), | |
| USB_DT_CONFIG_SIZE); | |
| /* Now that we know the length, get the whole thing */ | |
| bigbuffer = kmalloc(length, GFP_KERNEL); | |
| if (!bigbuffer) { | |
| result = -ENOMEM; | |
| goto err; | |
| } | |
| if (dev->quirks & USB_QUIRK_DELAY_INIT) | |
| msleep(200); | |
| result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | |
| bigbuffer, length); | |
| if (result < 0) { | |
| dev_err(ddev, "unable to read config index %d " | |
| "descriptor/%s\n", cfgno, "all"); | |
| kfree(bigbuffer); | |
| goto err; | |
| } | |
| if (result < length) { | |
| dev_warn(ddev, "config index %d descriptor too short " | |
| "(expected %i, got %i)\n", cfgno, length, result); | |
| length = result; | |
| } | |
| dev->rawdescriptors[cfgno] = bigbuffer; | |
| result = usb_parse_configuration(dev, cfgno, | |
| &dev->config[cfgno], bigbuffer, length); | |
| if (result < 0) { | |
| ++cfgno; | |
| goto err; | |
| } | |
| } | |
| err: | |
| kfree(desc); | |
| dev->descriptor.bNumConfigurations = cfgno; | |
| err2: | |
| if (result == -ENOMEM) | |
| dev_err(ddev, "out of memory\n"); | |
| return result; | |
| } | |
| void usb_release_bos_descriptor(struct usb_device *dev) | |
| { | |
| if (dev->bos) { | |
| kfree(dev->bos->desc); | |
| kfree(dev->bos); | |
| dev->bos = NULL; | |
| } | |
| } | |
| static const __u8 bos_desc_len[256] = { | |
| [USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE, | |
| [USB_CAP_TYPE_EXT] = USB_DT_USB_EXT_CAP_SIZE, | |
| [USB_SS_CAP_TYPE] = USB_DT_USB_SS_CAP_SIZE, | |
| [USB_SSP_CAP_TYPE] = USB_DT_USB_SSP_CAP_SIZE(1), | |
| [CONTAINER_ID_TYPE] = USB_DT_USB_SS_CONTN_ID_SIZE, | |
| [USB_PTM_CAP_TYPE] = USB_DT_USB_PTM_ID_SIZE, | |
| }; | |
| /* Get BOS descriptor set */ | |
| int usb_get_bos_descriptor(struct usb_device *dev) | |
| { | |
| struct device *ddev = &dev->dev; | |
| struct usb_bos_descriptor *bos; | |
| struct usb_dev_cap_header *cap; | |
| struct usb_ssp_cap_descriptor *ssp_cap; | |
| unsigned char *buffer; | |
| int length, total_len, num, i, ssac; | |
| __u8 cap_type; | |
| int ret; | |
| bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL); | |
| if (!bos) | |
| return -ENOMEM; | |
| /* Get BOS descriptor */ | |
| ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); | |
| if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) { | |
| dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n"); | |
| if (ret >= 0) | |
| ret = -ENOMSG; | |
| kfree(bos); | |
| return ret; | |
| } | |
| length = bos->bLength; | |
| total_len = le16_to_cpu(bos->wTotalLength); | |
| num = bos->bNumDeviceCaps; | |
| kfree(bos); | |
| if (total_len < length) | |
| return -EINVAL; | |
| dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL); | |
| if (!dev->bos) | |
| return -ENOMEM; | |
| /* Now let's get the whole BOS descriptor set */ | |
| buffer = kzalloc(total_len, GFP_KERNEL); | |
| if (!buffer) { | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| dev->bos->desc = (struct usb_bos_descriptor *)buffer; | |
| ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len); | |
| if (ret < total_len) { | |
| dev_err(ddev, "unable to get BOS descriptor set\n"); | |
| if (ret >= 0) | |
| ret = -ENOMSG; | |
| goto err; | |
| } | |
| total_len -= length; | |
| for (i = 0; i < num; i++) { | |
| buffer += length; | |
| cap = (struct usb_dev_cap_header *)buffer; | |
| if (total_len < sizeof(*cap) || total_len < cap->bLength) { | |
| dev->bos->desc->bNumDeviceCaps = i; | |
| break; | |
| } | |
| cap_type = cap->bDevCapabilityType; | |
| length = cap->bLength; | |
| if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) { | |
| dev->bos->desc->bNumDeviceCaps = i; | |
| break; | |
| } | |
| total_len -= length; | |
| if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { | |
| dev_warn(ddev, "descriptor type invalid, skip\n"); | |
| continue; | |
| } | |
| switch (cap_type) { | |
| case USB_CAP_TYPE_WIRELESS_USB: | |
| /* Wireless USB cap descriptor is handled by wusb */ | |
| break; | |
| case USB_CAP_TYPE_EXT: | |
| dev->bos->ext_cap = | |
| (struct usb_ext_cap_descriptor *)buffer; | |
| break; | |
| case USB_SS_CAP_TYPE: | |
| dev->bos->ss_cap = | |
| (struct usb_ss_cap_descriptor *)buffer; | |
| break; | |
| case USB_SSP_CAP_TYPE: | |
| ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; | |
| ssac = (le32_to_cpu(ssp_cap->bmAttributes) & | |
| USB_SSP_SUBLINK_SPEED_ATTRIBS); | |
| if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) | |
| dev->bos->ssp_cap = ssp_cap; | |
| break; | |
| case CONTAINER_ID_TYPE: | |
| dev->bos->ss_id = | |
| (struct usb_ss_container_id_descriptor *)buffer; | |
| break; | |
| case USB_PTM_CAP_TYPE: | |
| dev->bos->ptm_cap = | |
| (struct usb_ptm_cap_descriptor *)buffer; | |
| default: | |
| break; | |
| } | |
| } | |
| return 0; | |
| err: | |
| usb_release_bos_descriptor(dev); | |
| return ret; | |
| } |