| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) | |
| /* | |
| * platform.c - DesignWare HS OTG Controller platform driver | |
| * | |
| * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. The names of the above-listed copyright holders may not be used | |
| * to endorse or promote products derived from this software without | |
| * specific prior written permission. | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/clk.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/of_device.h> | |
| #include <linux/mutex.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_data/s3c-hsotg.h> | |
| #include <linux/reset.h> | |
| #include <linux/usb/of.h> | |
| #include "core.h" | |
| #include "hcd.h" | |
| #include "debug.h" | |
| static const char dwc2_driver_name[] = "dwc2"; | |
| /* | |
| * Check the dr_mode against the module configuration and hardware | |
| * capabilities. | |
| * | |
| * The hardware, module, and dr_mode, can each be set to host, device, | |
| * or otg. Check that all these values are compatible and adjust the | |
| * value of dr_mode if possible. | |
| * | |
| * actual | |
| * HW MOD dr_mode dr_mode | |
| * ------------------------------ | |
| * HST HST any : HST | |
| * HST DEV any : --- | |
| * HST OTG any : HST | |
| * | |
| * DEV HST any : --- | |
| * DEV DEV any : DEV | |
| * DEV OTG any : DEV | |
| * | |
| * OTG HST any : HST | |
| * OTG DEV any : DEV | |
| * OTG OTG any : dr_mode | |
| */ | |
| static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) | |
| { | |
| enum usb_dr_mode mode; | |
| hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); | |
| if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) | |
| hsotg->dr_mode = USB_DR_MODE_OTG; | |
| mode = hsotg->dr_mode; | |
| if (dwc2_hw_is_device(hsotg)) { | |
| if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { | |
| dev_err(hsotg->dev, | |
| "Controller does not support host mode.\n"); | |
| return -EINVAL; | |
| } | |
| mode = USB_DR_MODE_PERIPHERAL; | |
| } else if (dwc2_hw_is_host(hsotg)) { | |
| if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { | |
| dev_err(hsotg->dev, | |
| "Controller does not support device mode.\n"); | |
| return -EINVAL; | |
| } | |
| mode = USB_DR_MODE_HOST; | |
| } else { | |
| if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) | |
| mode = USB_DR_MODE_HOST; | |
| else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) | |
| mode = USB_DR_MODE_PERIPHERAL; | |
| } | |
| if (mode != hsotg->dr_mode) { | |
| dev_warn(hsotg->dev, | |
| "Configuration mismatch. dr_mode forced to %s\n", | |
| mode == USB_DR_MODE_HOST ? "host" : "device"); | |
| hsotg->dr_mode = mode; | |
| } | |
| return 0; | |
| } | |
| static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) | |
| { | |
| struct platform_device *pdev = to_platform_device(hsotg->dev); | |
| int ret; | |
| ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), | |
| hsotg->supplies); | |
| if (ret) | |
| return ret; | |
| if (hsotg->clk) { | |
| ret = clk_prepare_enable(hsotg->clk); | |
| if (ret) | |
| return ret; | |
| } | |
| if (hsotg->uphy) { | |
| ret = usb_phy_init(hsotg->uphy); | |
| } else if (hsotg->plat && hsotg->plat->phy_init) { | |
| ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); | |
| } else { | |
| ret = phy_power_on(hsotg->phy); | |
| if (ret == 0) | |
| ret = phy_init(hsotg->phy); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources | |
| * @hsotg: The driver state | |
| * | |
| * A wrapper for platform code responsible for controlling | |
| * low-level USB platform resources (phy, clock, regulators) | |
| */ | |
| int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) | |
| { | |
| int ret = __dwc2_lowlevel_hw_enable(hsotg); | |
| if (ret == 0) | |
| hsotg->ll_hw_enabled = true; | |
| return ret; | |
| } | |
| static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) | |
| { | |
| struct platform_device *pdev = to_platform_device(hsotg->dev); | |
| int ret = 0; | |
| if (hsotg->uphy) { | |
| usb_phy_shutdown(hsotg->uphy); | |
| } else if (hsotg->plat && hsotg->plat->phy_exit) { | |
| ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); | |
| } else { | |
| ret = phy_exit(hsotg->phy); | |
| if (ret == 0) | |
| ret = phy_power_off(hsotg->phy); | |
| } | |
| if (ret) | |
| return ret; | |
| if (hsotg->clk) | |
| clk_disable_unprepare(hsotg->clk); | |
| ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), | |
| hsotg->supplies); | |
| return ret; | |
| } | |
| /** | |
| * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources | |
| * @hsotg: The driver state | |
| * | |
| * A wrapper for platform code responsible for controlling | |
| * low-level USB platform resources (phy, clock, regulators) | |
| */ | |
| int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) | |
| { | |
| int ret = __dwc2_lowlevel_hw_disable(hsotg); | |
| if (ret == 0) | |
| hsotg->ll_hw_enabled = false; | |
| return ret; | |
| } | |
| static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) | |
| { | |
| int i, ret; | |
| hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); | |
| if (IS_ERR(hsotg->reset)) { | |
| ret = PTR_ERR(hsotg->reset); | |
| dev_err(hsotg->dev, "error getting reset control %d\n", ret); | |
| return ret; | |
| } | |
| reset_control_deassert(hsotg->reset); | |
| hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc"); | |
| if (IS_ERR(hsotg->reset_ecc)) { | |
| ret = PTR_ERR(hsotg->reset_ecc); | |
| dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret); | |
| return ret; | |
| } | |
| reset_control_deassert(hsotg->reset_ecc); | |
| /* | |
| * Attempt to find a generic PHY, then look for an old style | |
| * USB PHY and then fall back to pdata | |
| */ | |
| hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); | |
| if (IS_ERR(hsotg->phy)) { | |
| ret = PTR_ERR(hsotg->phy); | |
| switch (ret) { | |
| case -ENODEV: | |
| case -ENOSYS: | |
| hsotg->phy = NULL; | |
| break; | |
| case -EPROBE_DEFER: | |
| return ret; | |
| default: | |
| dev_err(hsotg->dev, "error getting phy %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| if (!hsotg->phy) { | |
| hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); | |
| if (IS_ERR(hsotg->uphy)) { | |
| ret = PTR_ERR(hsotg->uphy); | |
| switch (ret) { | |
| case -ENODEV: | |
| case -ENXIO: | |
| hsotg->uphy = NULL; | |
| break; | |
| case -EPROBE_DEFER: | |
| return ret; | |
| default: | |
| dev_err(hsotg->dev, "error getting usb phy %d\n", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| } | |
| hsotg->plat = dev_get_platdata(hsotg->dev); | |
| /* Clock */ | |
| hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg"); | |
| if (IS_ERR(hsotg->clk)) { | |
| dev_err(hsotg->dev, "cannot get otg clock\n"); | |
| return PTR_ERR(hsotg->clk); | |
| } | |
| /* Regulators */ | |
| for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) | |
| hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i]; | |
| ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies), | |
| hsotg->supplies); | |
| if (ret) { | |
| dev_err(hsotg->dev, "failed to request supplies: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the | |
| * DWC_otg driver | |
| * | |
| * @dev: Platform device | |
| * | |
| * This routine is called, for example, when the rmmod command is executed. The | |
| * device may or may not be electrically present. If it is present, the driver | |
| * stops device processing. Any resources used on behalf of this device are | |
| * freed. | |
| */ | |
| static int dwc2_driver_remove(struct platform_device *dev) | |
| { | |
| struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); | |
| dwc2_debugfs_exit(hsotg); | |
| if (hsotg->hcd_enabled) | |
| dwc2_hcd_remove(hsotg); | |
| if (hsotg->gadget_enabled) | |
| dwc2_hsotg_remove(hsotg); | |
| if (hsotg->ll_hw_enabled) | |
| dwc2_lowlevel_hw_disable(hsotg); | |
| reset_control_assert(hsotg->reset); | |
| reset_control_assert(hsotg->reset_ecc); | |
| return 0; | |
| } | |
| /** | |
| * dwc2_driver_shutdown() - Called on device shutdown | |
| * | |
| * @dev: Platform device | |
| * | |
| * In specific conditions (involving usb hubs) dwc2 devices can create a | |
| * lot of interrupts, even to the point of overwhelming devices running | |
| * at low frequencies. Some devices need to do special clock handling | |
| * at shutdown-time which may bring the system clock below the threshold | |
| * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs | |
| * prevents reboots/poweroffs from getting stuck in such cases. | |
| */ | |
| static void dwc2_driver_shutdown(struct platform_device *dev) | |
| { | |
| struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); | |
| disable_irq(hsotg->irq); | |
| } | |
| /** | |
| * dwc2_check_core_endianness() - Returns true if core and AHB have | |
| * opposite endianness. | |
| * @hsotg: Programming view of the DWC_otg controller. | |
| */ | |
| static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 snpsid; | |
| snpsid = ioread32(hsotg->regs + GSNPSID); | |
| if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID || | |
| (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID || | |
| (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg | |
| * driver | |
| * | |
| * @dev: Platform device | |
| * | |
| * This routine creates the driver components required to control the device | |
| * (core, HCD, and PCD) and initializes the device. The driver components are | |
| * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved | |
| * in the device private data. This allows the driver to access the dwc2_hsotg | |
| * structure on subsequent calls to driver methods for this device. | |
| */ | |
| static int dwc2_driver_probe(struct platform_device *dev) | |
| { | |
| struct dwc2_hsotg *hsotg; | |
| struct resource *res; | |
| int retval; | |
| hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); | |
| if (!hsotg) | |
| return -ENOMEM; | |
| hsotg->dev = &dev->dev; | |
| /* | |
| * Use reasonable defaults so platforms don't have to provide these. | |
| */ | |
| if (!dev->dev.dma_mask) | |
| dev->dev.dma_mask = &dev->dev.coherent_dma_mask; | |
| retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); | |
| if (retval) { | |
| dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval); | |
| return retval; | |
| } | |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); | |
| hsotg->regs = devm_ioremap_resource(&dev->dev, res); | |
| if (IS_ERR(hsotg->regs)) | |
| return PTR_ERR(hsotg->regs); | |
| dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", | |
| (unsigned long)res->start, hsotg->regs); | |
| retval = dwc2_lowlevel_hw_init(hsotg); | |
| if (retval) | |
| return retval; | |
| spin_lock_init(&hsotg->lock); | |
| hsotg->irq = platform_get_irq(dev, 0); | |
| if (hsotg->irq < 0) { | |
| dev_err(&dev->dev, "missing IRQ resource\n"); | |
| return hsotg->irq; | |
| } | |
| dev_dbg(hsotg->dev, "registering common handler for irq%d\n", | |
| hsotg->irq); | |
| retval = devm_request_irq(hsotg->dev, hsotg->irq, | |
| dwc2_handle_common_intr, IRQF_SHARED, | |
| dev_name(hsotg->dev), hsotg); | |
| if (retval) | |
| return retval; | |
| hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus"); | |
| if (IS_ERR(hsotg->vbus_supply)) { | |
| retval = PTR_ERR(hsotg->vbus_supply); | |
| hsotg->vbus_supply = NULL; | |
| if (retval != -ENODEV) | |
| return retval; | |
| } | |
| retval = dwc2_lowlevel_hw_enable(hsotg); | |
| if (retval) | |
| return retval; | |
| hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); | |
| retval = dwc2_get_dr_mode(hsotg); | |
| if (retval) | |
| goto error; | |
| hsotg->need_phy_for_wake = | |
| of_property_read_bool(dev->dev.of_node, | |
| "snps,need-phy-for-wake"); | |
| /* | |
| * Reset before dwc2_get_hwparams() then it could get power-on real | |
| * reset value form registers. | |
| */ | |
| retval = dwc2_core_reset(hsotg, false); | |
| if (retval) | |
| goto error; | |
| /* Detect config values from hardware */ | |
| retval = dwc2_get_hwparams(hsotg); | |
| if (retval) | |
| goto error; | |
| /* | |
| * For OTG cores, set the force mode bits to reflect the value | |
| * of dr_mode. Force mode bits should not be touched at any | |
| * other time after this. | |
| */ | |
| dwc2_force_dr_mode(hsotg); | |
| retval = dwc2_init_params(hsotg); | |
| if (retval) | |
| goto error; | |
| if (hsotg->dr_mode != USB_DR_MODE_HOST) { | |
| retval = dwc2_gadget_init(hsotg); | |
| if (retval) | |
| goto error; | |
| hsotg->gadget_enabled = 1; | |
| } | |
| /* | |
| * If we need PHY for wakeup we must be wakeup capable. | |
| * When we have a device that can wake without the PHY we | |
| * can adjust this condition. | |
| */ | |
| if (hsotg->need_phy_for_wake) | |
| device_set_wakeup_capable(&dev->dev, true); | |
| hsotg->reset_phy_on_wake = | |
| of_property_read_bool(dev->dev.of_node, | |
| "snps,reset-phy-on-wake"); | |
| if (hsotg->reset_phy_on_wake && !hsotg->phy) { | |
| dev_warn(hsotg->dev, | |
| "Quirk reset-phy-on-wake only supports generic PHYs\n"); | |
| hsotg->reset_phy_on_wake = false; | |
| } | |
| if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { | |
| retval = dwc2_hcd_init(hsotg); | |
| if (retval) { | |
| if (hsotg->gadget_enabled) | |
| dwc2_hsotg_remove(hsotg); | |
| goto error; | |
| } | |
| hsotg->hcd_enabled = 1; | |
| } | |
| platform_set_drvdata(dev, hsotg); | |
| hsotg->hibernated = 0; | |
| dwc2_debugfs_init(hsotg); | |
| /* Gadget code manages lowlevel hw on its own */ | |
| if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) | |
| dwc2_lowlevel_hw_disable(hsotg); | |
| return 0; | |
| error: | |
| dwc2_lowlevel_hw_disable(hsotg); | |
| return retval; | |
| } | |
| static int __maybe_unused dwc2_suspend(struct device *dev) | |
| { | |
| struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); | |
| bool is_device_mode = dwc2_is_device_mode(dwc2); | |
| int ret = 0; | |
| if (is_device_mode) | |
| dwc2_hsotg_suspend(dwc2); | |
| if (dwc2->ll_hw_enabled && | |
| (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) { | |
| ret = __dwc2_lowlevel_hw_disable(dwc2); | |
| dwc2->phy_off_for_suspend = true; | |
| } | |
| return ret; | |
| } | |
| static int __maybe_unused dwc2_resume(struct device *dev) | |
| { | |
| struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); | |
| int ret = 0; | |
| if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) { | |
| ret = __dwc2_lowlevel_hw_enable(dwc2); | |
| if (ret) | |
| return ret; | |
| } | |
| dwc2->phy_off_for_suspend = false; | |
| if (dwc2_is_device_mode(dwc2)) | |
| ret = dwc2_hsotg_resume(dwc2); | |
| return ret; | |
| } | |
| static const struct dev_pm_ops dwc2_dev_pm_ops = { | |
| SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) | |
| }; | |
| static struct platform_driver dwc2_platform_driver = { | |
| .driver = { | |
| .name = dwc2_driver_name, | |
| .of_match_table = dwc2_of_match_table, | |
| .pm = &dwc2_dev_pm_ops, | |
| }, | |
| .probe = dwc2_driver_probe, | |
| .remove = dwc2_driver_remove, | |
| .shutdown = dwc2_driver_shutdown, | |
| }; | |
| module_platform_driver(dwc2_platform_driver); | |
| MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue"); | |
| MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |