| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * f_eem.c -- USB CDC Ethernet (EEM) link function driver | |
| * | |
| * Copyright (C) 2003-2005,2008 David Brownell | |
| * Copyright (C) 2008 Nokia Corporation | |
| * Copyright (C) 2009 EF Johnson Technologies | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/crc32.h> | |
| #include <linux/slab.h> | |
| #include "u_ether.h" | |
| #include "u_ether_configfs.h" | |
| #include "u_eem.h" | |
| #define EEM_HLEN 2 | |
| /* | |
| * This function is a "CDC Ethernet Emulation Model" (CDC EEM) | |
| * Ethernet link. | |
| */ | |
| struct f_eem { | |
| struct gether port; | |
| u8 ctrl_id; | |
| }; | |
| static inline struct f_eem *func_to_eem(struct usb_function *f) | |
| { | |
| return container_of(f, struct f_eem, port.func); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* interface descriptor: */ | |
| static struct usb_interface_descriptor eem_intf = { | |
| .bLength = sizeof eem_intf, | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| /* .bInterfaceNumber = DYNAMIC */ | |
| .bNumEndpoints = 2, | |
| .bInterfaceClass = USB_CLASS_COMM, | |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_EEM, | |
| .bInterfaceProtocol = USB_CDC_PROTO_EEM, | |
| /* .iInterface = DYNAMIC */ | |
| }; | |
| /* full speed support: */ | |
| static struct usb_endpoint_descriptor eem_fs_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| }; | |
| static struct usb_endpoint_descriptor eem_fs_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| }; | |
| static struct usb_descriptor_header *eem_fs_function[] = { | |
| /* CDC EEM control descriptors */ | |
| (struct usb_descriptor_header *) &eem_intf, | |
| (struct usb_descriptor_header *) &eem_fs_in_desc, | |
| (struct usb_descriptor_header *) &eem_fs_out_desc, | |
| NULL, | |
| }; | |
| /* high speed support: */ | |
| static struct usb_endpoint_descriptor eem_hs_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| }; | |
| static struct usb_endpoint_descriptor eem_hs_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| }; | |
| static struct usb_descriptor_header *eem_hs_function[] = { | |
| /* CDC EEM control descriptors */ | |
| (struct usb_descriptor_header *) &eem_intf, | |
| (struct usb_descriptor_header *) &eem_hs_in_desc, | |
| (struct usb_descriptor_header *) &eem_hs_out_desc, | |
| NULL, | |
| }; | |
| /* super speed support: */ | |
| static struct usb_endpoint_descriptor eem_ss_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_endpoint_descriptor eem_ss_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc = { | |
| .bLength = sizeof eem_ss_bulk_comp_desc, | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| /* the following 2 values can be tweaked if necessary */ | |
| /* .bMaxBurst = 0, */ | |
| /* .bmAttributes = 0, */ | |
| }; | |
| static struct usb_descriptor_header *eem_ss_function[] = { | |
| /* CDC EEM control descriptors */ | |
| (struct usb_descriptor_header *) &eem_intf, | |
| (struct usb_descriptor_header *) &eem_ss_in_desc, | |
| (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, | |
| (struct usb_descriptor_header *) &eem_ss_out_desc, | |
| (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, | |
| NULL, | |
| }; | |
| /* string descriptors: */ | |
| static struct usb_string eem_string_defs[] = { | |
| [0].s = "CDC Ethernet Emulation Model (EEM)", | |
| { } /* end of list */ | |
| }; | |
| static struct usb_gadget_strings eem_string_table = { | |
| .language = 0x0409, /* en-us */ | |
| .strings = eem_string_defs, | |
| }; | |
| static struct usb_gadget_strings *eem_strings[] = { | |
| &eem_string_table, | |
| NULL, | |
| }; | |
| /*-------------------------------------------------------------------------*/ | |
| static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) | |
| { | |
| struct usb_composite_dev *cdev = f->config->cdev; | |
| u16 w_index = le16_to_cpu(ctrl->wIndex); | |
| u16 w_value = le16_to_cpu(ctrl->wValue); | |
| u16 w_length = le16_to_cpu(ctrl->wLength); | |
| DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", | |
| ctrl->bRequestType, ctrl->bRequest, | |
| w_value, w_index, w_length); | |
| /* device either stalls (value < 0) or reports success */ | |
| return -EOPNOTSUPP; | |
| } | |
| static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt) | |
| { | |
| struct f_eem *eem = func_to_eem(f); | |
| struct usb_composite_dev *cdev = f->config->cdev; | |
| struct net_device *net; | |
| /* we know alt == 0, so this is an activation or a reset */ | |
| if (alt != 0) | |
| goto fail; | |
| if (intf == eem->ctrl_id) { | |
| DBG(cdev, "reset eem\n"); | |
| gether_disconnect(&eem->port); | |
| if (!eem->port.in_ep->desc || !eem->port.out_ep->desc) { | |
| DBG(cdev, "init eem\n"); | |
| if (config_ep_by_speed(cdev->gadget, f, | |
| eem->port.in_ep) || | |
| config_ep_by_speed(cdev->gadget, f, | |
| eem->port.out_ep)) { | |
| eem->port.in_ep->desc = NULL; | |
| eem->port.out_ep->desc = NULL; | |
| goto fail; | |
| } | |
| } | |
| /* zlps should not occur because zero-length EEM packets | |
| * will be inserted in those cases where they would occur | |
| */ | |
| eem->port.is_zlp_ok = 1; | |
| eem->port.cdc_filter = DEFAULT_FILTER; | |
| DBG(cdev, "activate eem\n"); | |
| net = gether_connect(&eem->port); | |
| if (IS_ERR(net)) | |
| return PTR_ERR(net); | |
| } else | |
| goto fail; | |
| return 0; | |
| fail: | |
| return -EINVAL; | |
| } | |
| static void eem_disable(struct usb_function *f) | |
| { | |
| struct f_eem *eem = func_to_eem(f); | |
| struct usb_composite_dev *cdev = f->config->cdev; | |
| DBG(cdev, "eem deactivated\n"); | |
| if (eem->port.in_ep->enabled) | |
| gether_disconnect(&eem->port); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* EEM function driver setup/binding */ | |
| static int eem_bind(struct usb_configuration *c, struct usb_function *f) | |
| { | |
| struct usb_composite_dev *cdev = c->cdev; | |
| struct f_eem *eem = func_to_eem(f); | |
| struct usb_string *us; | |
| int status; | |
| struct usb_ep *ep; | |
| struct f_eem_opts *eem_opts; | |
| eem_opts = container_of(f->fi, struct f_eem_opts, func_inst); | |
| /* | |
| * in drivers/usb/gadget/configfs.c:configfs_composite_bind() | |
| * configurations are bound in sequence with list_for_each_entry, | |
| * in each configuration its functions are bound in sequence | |
| * with list_for_each_entry, so we assume no race condition | |
| * with regard to eem_opts->bound access | |
| */ | |
| if (!eem_opts->bound) { | |
| mutex_lock(&eem_opts->lock); | |
| gether_set_gadget(eem_opts->net, cdev->gadget); | |
| status = gether_register_netdev(eem_opts->net); | |
| mutex_unlock(&eem_opts->lock); | |
| if (status) | |
| return status; | |
| eem_opts->bound = true; | |
| } | |
| us = usb_gstrings_attach(cdev, eem_strings, | |
| ARRAY_SIZE(eem_string_defs)); | |
| if (IS_ERR(us)) | |
| return PTR_ERR(us); | |
| eem_intf.iInterface = us[0].id; | |
| /* allocate instance-specific interface IDs */ | |
| status = usb_interface_id(c, f); | |
| if (status < 0) | |
| goto fail; | |
| eem->ctrl_id = status; | |
| eem_intf.bInterfaceNumber = status; | |
| status = -ENODEV; | |
| /* allocate instance-specific endpoints */ | |
| ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc); | |
| if (!ep) | |
| goto fail; | |
| eem->port.in_ep = ep; | |
| ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc); | |
| if (!ep) | |
| goto fail; | |
| eem->port.out_ep = ep; | |
| status = -ENOMEM; | |
| /* support all relevant hardware speeds... we expect that when | |
| * hardware is dual speed, all bulk-capable endpoints work at | |
| * both speeds | |
| */ | |
| eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; | |
| eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; | |
| eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; | |
| eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; | |
| status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function, | |
| eem_ss_function, NULL); | |
| if (status) | |
| goto fail; | |
| DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n", | |
| gadget_is_superspeed(c->cdev->gadget) ? "super" : | |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", | |
| eem->port.in_ep->name, eem->port.out_ep->name); | |
| return 0; | |
| fail: | |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); | |
| return status; | |
| } | |
| static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *)req->context; | |
| dev_kfree_skb_any(skb); | |
| } | |
| /* | |
| * Add the EEM header and ethernet checksum. | |
| * We currently do not attempt to put multiple ethernet frames | |
| * into a single USB transfer | |
| */ | |
| static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) | |
| { | |
| struct sk_buff *skb2 = NULL; | |
| struct usb_ep *in = port->in_ep; | |
| int headroom, tailroom, padlen = 0; | |
| u16 len; | |
| if (!skb) | |
| return NULL; | |
| len = skb->len; | |
| headroom = skb_headroom(skb); | |
| tailroom = skb_tailroom(skb); | |
| /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0, | |
| * stick two bytes of zero-length EEM packet on the end. | |
| */ | |
| if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0) | |
| padlen += 2; | |
| if ((tailroom >= (ETH_FCS_LEN + padlen)) && | |
| (headroom >= EEM_HLEN) && !skb_cloned(skb)) | |
| goto done; | |
| skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC); | |
| dev_kfree_skb_any(skb); | |
| skb = skb2; | |
| if (!skb) | |
| return skb; | |
| done: | |
| /* use the "no CRC" option */ | |
| put_unaligned_be32(0xdeadbeef, skb_put(skb, 4)); | |
| /* EEM packet header format: | |
| * b0..13: length of ethernet frame | |
| * b14: bmCRC (0 == sentinel CRC) | |
| * b15: bmType (0 == data) | |
| */ | |
| len = skb->len; | |
| put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); | |
| /* add a zero-length EEM packet, if needed */ | |
| if (padlen) | |
| put_unaligned_le16(0, skb_put(skb, 2)); | |
| return skb; | |
| } | |
| /* | |
| * Remove the EEM header. Note that there can be many EEM packets in a single | |
| * USB transfer, so we need to break them out and handle them independently. | |
| */ | |
| static int eem_unwrap(struct gether *port, | |
| struct sk_buff *skb, | |
| struct sk_buff_head *list) | |
| { | |
| struct usb_composite_dev *cdev = port->func.config->cdev; | |
| int status = 0; | |
| do { | |
| struct sk_buff *skb2; | |
| u16 header; | |
| u16 len = 0; | |
| if (skb->len < EEM_HLEN) { | |
| status = -EINVAL; | |
| DBG(cdev, "invalid EEM header\n"); | |
| goto error; | |
| } | |
| /* remove the EEM header */ | |
| header = get_unaligned_le16(skb->data); | |
| skb_pull(skb, EEM_HLEN); | |
| /* EEM packet header format: | |
| * b0..14: EEM type dependent (data or command) | |
| * b15: bmType (0 == data, 1 == command) | |
| */ | |
| if (header & BIT(15)) { | |
| struct usb_request *req = cdev->req; | |
| u16 bmEEMCmd; | |
| /* EEM command packet format: | |
| * b0..10: bmEEMCmdParam | |
| * b11..13: bmEEMCmd | |
| * b14: reserved (must be zero) | |
| * b15: bmType (1 == command) | |
| */ | |
| if (header & BIT(14)) | |
| continue; | |
| bmEEMCmd = (header >> 11) & 0x7; | |
| switch (bmEEMCmd) { | |
| case 0: /* echo */ | |
| len = header & 0x7FF; | |
| if (skb->len < len) { | |
| status = -EOVERFLOW; | |
| goto error; | |
| } | |
| skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (unlikely(!skb2)) { | |
| DBG(cdev, "EEM echo response error\n"); | |
| goto next; | |
| } | |
| skb_trim(skb2, len); | |
| put_unaligned_le16(BIT(15) | BIT(11) | len, | |
| skb_push(skb2, 2)); | |
| skb_copy_bits(skb2, 0, req->buf, skb2->len); | |
| req->length = skb2->len; | |
| req->complete = eem_cmd_complete; | |
| req->zero = 1; | |
| req->context = skb2; | |
| if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC)) | |
| DBG(cdev, "echo response queue fail\n"); | |
| break; | |
| case 1: /* echo response */ | |
| case 2: /* suspend hint */ | |
| case 3: /* response hint */ | |
| case 4: /* response complete hint */ | |
| case 5: /* tickle */ | |
| default: /* reserved */ | |
| continue; | |
| } | |
| } else { | |
| u32 crc, crc2; | |
| struct sk_buff *skb3; | |
| /* check for zero-length EEM packet */ | |
| if (header == 0) | |
| continue; | |
| /* EEM data packet format: | |
| * b0..13: length of ethernet frame | |
| * b14: bmCRC (0 == sentinel, 1 == calculated) | |
| * b15: bmType (0 == data) | |
| */ | |
| len = header & 0x3FFF; | |
| if ((skb->len < len) | |
| || (len < (ETH_HLEN + ETH_FCS_LEN))) { | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| /* validate CRC */ | |
| if (header & BIT(14)) { | |
| crc = get_unaligned_le32(skb->data + len | |
| - ETH_FCS_LEN); | |
| crc2 = ~crc32_le(~0, | |
| skb->data, len - ETH_FCS_LEN); | |
| } else { | |
| crc = get_unaligned_be32(skb->data + len | |
| - ETH_FCS_LEN); | |
| crc2 = 0xdeadbeef; | |
| } | |
| if (crc != crc2) { | |
| DBG(cdev, "invalid EEM CRC\n"); | |
| goto next; | |
| } | |
| skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (unlikely(!skb2)) { | |
| DBG(cdev, "unable to unframe EEM packet\n"); | |
| continue; | |
| } | |
| skb_trim(skb2, len - ETH_FCS_LEN); | |
| skb3 = skb_copy_expand(skb2, | |
| NET_IP_ALIGN, | |
| 0, | |
| GFP_ATOMIC); | |
| if (unlikely(!skb3)) { | |
| dev_kfree_skb_any(skb2); | |
| continue; | |
| } | |
| dev_kfree_skb_any(skb2); | |
| skb_queue_tail(list, skb3); | |
| } | |
| next: | |
| skb_pull(skb, len); | |
| } while (skb->len); | |
| error: | |
| dev_kfree_skb_any(skb); | |
| return status; | |
| } | |
| static inline struct f_eem_opts *to_f_eem_opts(struct config_item *item) | |
| { | |
| return container_of(to_config_group(item), struct f_eem_opts, | |
| func_inst.group); | |
| } | |
| /* f_eem_item_ops */ | |
| USB_ETHERNET_CONFIGFS_ITEM(eem); | |
| /* f_eem_opts_dev_addr */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(eem); | |
| /* f_eem_opts_host_addr */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(eem); | |
| /* f_eem_opts_qmult */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(eem); | |
| /* f_eem_opts_ifname */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(eem); | |
| static struct configfs_attribute *eem_attrs[] = { | |
| &eem_opts_attr_dev_addr, | |
| &eem_opts_attr_host_addr, | |
| &eem_opts_attr_qmult, | |
| &eem_opts_attr_ifname, | |
| NULL, | |
| }; | |
| static const struct config_item_type eem_func_type = { | |
| .ct_item_ops = &eem_item_ops, | |
| .ct_attrs = eem_attrs, | |
| .ct_owner = THIS_MODULE, | |
| }; | |
| static void eem_free_inst(struct usb_function_instance *f) | |
| { | |
| struct f_eem_opts *opts; | |
| opts = container_of(f, struct f_eem_opts, func_inst); | |
| if (opts->bound) | |
| gether_cleanup(netdev_priv(opts->net)); | |
| else | |
| free_netdev(opts->net); | |
| kfree(opts); | |
| } | |
| static struct usb_function_instance *eem_alloc_inst(void) | |
| { | |
| struct f_eem_opts *opts; | |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); | |
| if (!opts) | |
| return ERR_PTR(-ENOMEM); | |
| mutex_init(&opts->lock); | |
| opts->func_inst.free_func_inst = eem_free_inst; | |
| opts->net = gether_setup_default(); | |
| if (IS_ERR(opts->net)) { | |
| struct net_device *net = opts->net; | |
| kfree(opts); | |
| return ERR_CAST(net); | |
| } | |
| config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type); | |
| return &opts->func_inst; | |
| } | |
| static void eem_free(struct usb_function *f) | |
| { | |
| struct f_eem *eem; | |
| struct f_eem_opts *opts; | |
| eem = func_to_eem(f); | |
| opts = container_of(f->fi, struct f_eem_opts, func_inst); | |
| kfree(eem); | |
| mutex_lock(&opts->lock); | |
| opts->refcnt--; | |
| mutex_unlock(&opts->lock); | |
| } | |
| static void eem_unbind(struct usb_configuration *c, struct usb_function *f) | |
| { | |
| DBG(c->cdev, "eem unbind\n"); | |
| usb_free_all_descriptors(f); | |
| } | |
| static struct usb_function *eem_alloc(struct usb_function_instance *fi) | |
| { | |
| struct f_eem *eem; | |
| struct f_eem_opts *opts; | |
| /* allocate and initialize one new instance */ | |
| eem = kzalloc(sizeof(*eem), GFP_KERNEL); | |
| if (!eem) | |
| return ERR_PTR(-ENOMEM); | |
| opts = container_of(fi, struct f_eem_opts, func_inst); | |
| mutex_lock(&opts->lock); | |
| opts->refcnt++; | |
| eem->port.ioport = netdev_priv(opts->net); | |
| mutex_unlock(&opts->lock); | |
| eem->port.cdc_filter = DEFAULT_FILTER; | |
| eem->port.func.name = "cdc_eem"; | |
| /* descriptors are per-instance copies */ | |
| eem->port.func.bind = eem_bind; | |
| eem->port.func.unbind = eem_unbind; | |
| eem->port.func.set_alt = eem_set_alt; | |
| eem->port.func.setup = eem_setup; | |
| eem->port.func.disable = eem_disable; | |
| eem->port.func.free_func = eem_free; | |
| eem->port.wrap = eem_wrap; | |
| eem->port.unwrap = eem_unwrap; | |
| eem->port.header_len = EEM_HLEN; | |
| return &eem->port.func; | |
| } | |
| DECLARE_USB_FUNCTION_INIT(eem, eem_alloc_inst, eem_alloc); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("David Brownell"); |