| /* |
| Frontend/Card driver for TwinHan DST Frontend |
| Copyright (C) 2003 Jamie Honan |
| Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| #include <asm/div64.h> |
| #include "dvb_frontend.h" |
| #include "dst_priv.h" |
| #include "dst_common.h" |
| |
| static unsigned int verbose = 1; |
| module_param(verbose, int, 0644); |
| MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); |
| |
| static unsigned int dst_addons; |
| module_param(dst_addons, int, 0644); |
| MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)"); |
| |
| #define HAS_LOCK 1 |
| #define ATTEMPT_TUNE 2 |
| #define HAS_POWER 4 |
| |
| #define DST_ERROR 0 |
| #define DST_NOTICE 1 |
| #define DST_INFO 2 |
| #define DST_DEBUG 3 |
| |
| #define dprintk(x, y, z, format, arg...) do { \ |
| if (z) { \ |
| if ((x > DST_ERROR) && (x > y)) \ |
| printk(KERN_ERR "%s: " format "\n", __FUNCTION__ , ##arg); \ |
| else if ((x > DST_NOTICE) && (x > y)) \ |
| printk(KERN_NOTICE "%s: " format "\n", __FUNCTION__ , ##arg); \ |
| else if ((x > DST_INFO) && (x > y)) \ |
| printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##arg); \ |
| else if ((x > DST_DEBUG) && (x > y)) \ |
| printk(KERN_DEBUG "%s: " format "\n", __FUNCTION__ , ##arg); \ |
| } else { \ |
| if (x > y) \ |
| printk(format, ##arg); \ |
| } \ |
| } while(0) |
| |
| |
| static void dst_packsize(struct dst_state *state, int psize) |
| { |
| union dst_gpio_packet bits; |
| |
| bits.psize = psize; |
| bt878_device_control(state->bt, DST_IG_TS, &bits); |
| } |
| |
| int dst_gpio_outb(struct dst_state *state, u32 mask, u32 enbb, u32 outhigh, int delay) |
| { |
| union dst_gpio_packet enb; |
| union dst_gpio_packet bits; |
| int err; |
| |
| enb.enb.mask = mask; |
| enb.enb.enable = enbb; |
| |
| dprintk(verbose, DST_INFO, 1, "mask=[%04x], enbb=[%04x], outhigh=[%04x]", mask, enbb, outhigh); |
| if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)", err, mask, enbb); |
| return -EREMOTEIO; |
| } |
| udelay(1000); |
| /* because complete disabling means no output, no need to do output packet */ |
| if (enbb == 0) |
| return 0; |
| if (delay) |
| msleep(10); |
| bits.outp.mask = enbb; |
| bits.outp.highvals = outhigh; |
| if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)", err, enbb, outhigh); |
| return -EREMOTEIO; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_gpio_outb); |
| |
| int dst_gpio_inb(struct dst_state *state, u8 *result) |
| { |
| union dst_gpio_packet rd_packet; |
| int err; |
| |
| *result = 0; |
| if ((err = bt878_device_control(state->bt, DST_IG_READ, &rd_packet)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb error (err == %i)\n", err); |
| return -EREMOTEIO; |
| } |
| *result = (u8) rd_packet.rd.value; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_gpio_inb); |
| |
| int rdc_reset_state(struct dst_state *state) |
| { |
| dprintk(verbose, DST_INFO, 1, "Resetting state machine"); |
| if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| return -1; |
| } |
| msleep(10); |
| if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| msleep(10); |
| return -1; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rdc_reset_state); |
| |
| int rdc_8820_reset(struct dst_state *state) |
| { |
| dprintk(verbose, DST_DEBUG, 1, "Resetting DST"); |
| if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| return -1; |
| } |
| udelay(1000); |
| if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rdc_8820_reset); |
| |
| int dst_pio_enable(struct dst_state *state) |
| { |
| if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| return -1; |
| } |
| udelay(1000); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_pio_enable); |
| |
| int dst_pio_disable(struct dst_state *state) |
| { |
| if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); |
| return -1; |
| } |
| if (state->type_flags & DST_TYPE_HAS_FW_1) |
| udelay(1000); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_pio_disable); |
| |
| int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode) |
| { |
| u8 reply; |
| int i; |
| |
| for (i = 0; i < 200; i++) { |
| if (dst_gpio_inb(state, &reply) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb ERROR !"); |
| return -1; |
| } |
| if ((reply & RDC_8820_PIO_0_ENABLE) == 0) { |
| dprintk(verbose, DST_INFO, 1, "dst wait ready after %d", i); |
| return 1; |
| } |
| msleep(10); |
| } |
| dprintk(verbose, DST_NOTICE, 1, "dst wait NOT ready after %d", i); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_wait_dst_ready); |
| |
| int dst_error_recovery(struct dst_state *state) |
| { |
| dprintk(verbose, DST_NOTICE, 1, "Trying to return from previous errors."); |
| dst_pio_disable(state); |
| msleep(10); |
| dst_pio_enable(state); |
| msleep(10); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_error_recovery); |
| |
| int dst_error_bailout(struct dst_state *state) |
| { |
| dprintk(verbose, DST_INFO, 1, "Trying to bailout from previous error."); |
| rdc_8820_reset(state); |
| dst_pio_disable(state); |
| msleep(10); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_error_bailout); |
| |
| int dst_comm_init(struct dst_state *state) |
| { |
| dprintk(verbose, DST_INFO, 1, "Initializing DST."); |
| if ((dst_pio_enable(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "PIO Enable Failed"); |
| return -1; |
| } |
| if ((rdc_reset_state(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "RDC 8820 State RESET Failed."); |
| return -1; |
| } |
| if (state->type_flags & DST_TYPE_HAS_FW_1) |
| msleep(100); |
| else |
| msleep(5); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dst_comm_init); |
| |
| int write_dst(struct dst_state *state, u8 *data, u8 len) |
| { |
| struct i2c_msg msg = { |
| .addr = state->config->demod_address, |
| .flags = 0, |
| .buf = data, |
| .len = len |
| }; |
| |
| int err; |
| u8 cnt, i; |
| |
| dprintk(verbose, DST_NOTICE, 0, "writing [ "); |
| for (i = 0; i < len; i++) |
| dprintk(verbose, DST_NOTICE, 0, "%02x ", data[i]); |
| dprintk(verbose, DST_NOTICE, 0, "]\n"); |
| |
| for (cnt = 0; cnt < 2; cnt++) { |
| if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "_write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, data[0]); |
| dst_error_recovery(state); |
| continue; |
| } else |
| break; |
| } |
| if (cnt >= 2) { |
| dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); |
| dst_error_bailout(state); |
| |
| return -1; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(write_dst); |
| |
| int read_dst(struct dst_state *state, u8 *ret, u8 len) |
| { |
| struct i2c_msg msg = { |
| .addr = state->config->demod_address, |
| .flags = I2C_M_RD, |
| .buf = ret, |
| .len = len |
| }; |
| |
| int err; |
| int cnt; |
| |
| for (cnt = 0; cnt < 2; cnt++) { |
| if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, ret[0]); |
| dst_error_recovery(state); |
| continue; |
| } else |
| break; |
| } |
| if (cnt >= 2) { |
| dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); |
| dst_error_bailout(state); |
| |
| return -1; |
| } |
| dprintk(verbose, DST_DEBUG, 1, "reply is 0x%x", ret[0]); |
| for (err = 1; err < len; err++) |
| dprintk(verbose, DST_DEBUG, 0, " 0x%x", ret[err]); |
| if (err > 1) |
| dprintk(verbose, DST_DEBUG, 0, "\n"); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(read_dst); |
| |
| static int dst_set_polarization(struct dst_state *state) |
| { |
| switch (state->voltage) { |
| case SEC_VOLTAGE_13: /* Vertical */ |
| dprintk(verbose, DST_INFO, 1, "Polarization=[Vertical]"); |
| state->tx_tuna[8] &= ~0x40; |
| break; |
| case SEC_VOLTAGE_18: /* Horizontal */ |
| dprintk(verbose, DST_INFO, 1, "Polarization=[Horizontal]"); |
| state->tx_tuna[8] |= 0x40; |
| break; |
| case SEC_VOLTAGE_OFF: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int dst_set_freq(struct dst_state *state, u32 freq) |
| { |
| state->frequency = freq; |
| dprintk(verbose, DST_INFO, 1, "set Frequency %u", freq); |
| |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| freq = freq / 1000; |
| if (freq < 950 || freq > 2150) |
| return -EINVAL; |
| state->tx_tuna[2] = (freq >> 8); |
| state->tx_tuna[3] = (u8) freq; |
| state->tx_tuna[4] = 0x01; |
| state->tx_tuna[8] &= ~0x04; |
| if (state->type_flags & DST_TYPE_HAS_OBS_REGS) { |
| if (freq < 1531) |
| state->tx_tuna[8] |= 0x04; |
| } |
| } else if (state->dst_type == DST_TYPE_IS_TERR) { |
| freq = freq / 1000; |
| if (freq < 137000 || freq > 858000) |
| return -EINVAL; |
| state->tx_tuna[2] = (freq >> 16) & 0xff; |
| state->tx_tuna[3] = (freq >> 8) & 0xff; |
| state->tx_tuna[4] = (u8) freq; |
| } else if (state->dst_type == DST_TYPE_IS_CABLE) { |
| freq = freq / 1000; |
| state->tx_tuna[2] = (freq >> 16) & 0xff; |
| state->tx_tuna[3] = (freq >> 8) & 0xff; |
| state->tx_tuna[4] = (u8) freq; |
| } else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int dst_set_bandwidth(struct dst_state *state, fe_bandwidth_t bandwidth) |
| { |
| state->bandwidth = bandwidth; |
| |
| if (state->dst_type != DST_TYPE_IS_TERR) |
| return 0; |
| |
| switch (bandwidth) { |
| case BANDWIDTH_6_MHZ: |
| if (state->dst_hw_cap & DST_TYPE_HAS_CA) |
| state->tx_tuna[7] = 0x06; |
| else { |
| state->tx_tuna[6] = 0x06; |
| state->tx_tuna[7] = 0x00; |
| } |
| break; |
| case BANDWIDTH_7_MHZ: |
| if (state->dst_hw_cap & DST_TYPE_HAS_CA) |
| state->tx_tuna[7] = 0x07; |
| else { |
| state->tx_tuna[6] = 0x07; |
| state->tx_tuna[7] = 0x00; |
| } |
| break; |
| case BANDWIDTH_8_MHZ: |
| if (state->dst_hw_cap & DST_TYPE_HAS_CA) |
| state->tx_tuna[7] = 0x08; |
| else { |
| state->tx_tuna[6] = 0x08; |
| state->tx_tuna[7] = 0x00; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int dst_set_inversion(struct dst_state *state, fe_spectral_inversion_t inversion) |
| { |
| state->inversion = inversion; |
| switch (inversion) { |
| case INVERSION_OFF: /* Inversion = Normal */ |
| state->tx_tuna[8] &= ~0x80; |
| break; |
| case INVERSION_ON: |
| state->tx_tuna[8] |= 0x80; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int dst_set_fec(struct dst_state *state, fe_code_rate_t fec) |
| { |
| state->fec = fec; |
| return 0; |
| } |
| |
| static fe_code_rate_t dst_get_fec(struct dst_state *state) |
| { |
| return state->fec; |
| } |
| |
| static int dst_set_symbolrate(struct dst_state *state, u32 srate) |
| { |
| u32 symcalc; |
| u64 sval; |
| |
| state->symbol_rate = srate; |
| if (state->dst_type == DST_TYPE_IS_TERR) { |
| return 0; |
| } |
| dprintk(verbose, DST_INFO, 1, "set symrate %u", srate); |
| srate /= 1000; |
| if (state->type_flags & DST_TYPE_HAS_SYMDIV) { |
| sval = srate; |
| sval <<= 20; |
| do_div(sval, 88000); |
| symcalc = (u32) sval; |
| dprintk(verbose, DST_INFO, 1, "set symcalc %u", symcalc); |
| state->tx_tuna[5] = (u8) (symcalc >> 12); |
| state->tx_tuna[6] = (u8) (symcalc >> 4); |
| state->tx_tuna[7] = (u8) (symcalc << 4); |
| } else { |
| state->tx_tuna[5] = (u8) (srate >> 16) & 0x7f; |
| state->tx_tuna[6] = (u8) (srate >> 8); |
| state->tx_tuna[7] = (u8) srate; |
| } |
| state->tx_tuna[8] &= ~0x20; |
| if (state->type_flags & DST_TYPE_HAS_OBS_REGS) { |
| if (srate > 8000) |
| state->tx_tuna[8] |= 0x20; |
| } |
| return 0; |
| } |
| |
| |
| static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation) |
| { |
| if (state->dst_type != DST_TYPE_IS_CABLE) |
| return 0; |
| |
| state->modulation = modulation; |
| switch (modulation) { |
| case QAM_16: |
| state->tx_tuna[8] = 0x10; |
| break; |
| case QAM_32: |
| state->tx_tuna[8] = 0x20; |
| break; |
| case QAM_64: |
| state->tx_tuna[8] = 0x40; |
| break; |
| case QAM_128: |
| state->tx_tuna[8] = 0x80; |
| break; |
| case QAM_256: |
| state->tx_tuna[8] = 0x00; |
| break; |
| case QPSK: |
| case QAM_AUTO: |
| case VSB_8: |
| case VSB_16: |
| default: |
| return -EINVAL; |
| |
| } |
| |
| return 0; |
| } |
| |
| static fe_modulation_t dst_get_modulation(struct dst_state *state) |
| { |
| return state->modulation; |
| } |
| |
| |
| u8 dst_check_sum(u8 *buf, u32 len) |
| { |
| u32 i; |
| u8 val = 0; |
| if (!len) |
| return 0; |
| for (i = 0; i < len; i++) { |
| val += buf[i]; |
| } |
| return ((~val) + 1); |
| } |
| EXPORT_SYMBOL(dst_check_sum); |
| |
| static void dst_type_flags_print(u32 type_flags) |
| { |
| dprintk(verbose, DST_ERROR, 0, "DST type flags :"); |
| if (type_flags & DST_TYPE_HAS_NEWTUNE) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner", DST_TYPE_HAS_NEWTUNE); |
| if (type_flags & DST_TYPE_HAS_TS204) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x ts204", DST_TYPE_HAS_TS204); |
| if (type_flags & DST_TYPE_HAS_SYMDIV) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x symdiv", DST_TYPE_HAS_SYMDIV); |
| if (type_flags & DST_TYPE_HAS_FW_1) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 1", DST_TYPE_HAS_FW_1); |
| if (type_flags & DST_TYPE_HAS_FW_2) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 2", DST_TYPE_HAS_FW_2); |
| if (type_flags & DST_TYPE_HAS_FW_3) |
| dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 3", DST_TYPE_HAS_FW_3); |
| dprintk(verbose, DST_ERROR, 0, "\n"); |
| } |
| |
| |
| static int dst_type_print(u8 type) |
| { |
| char *otype; |
| switch (type) { |
| case DST_TYPE_IS_SAT: |
| otype = "satellite"; |
| break; |
| |
| case DST_TYPE_IS_TERR: |
| otype = "terrestrial"; |
| break; |
| |
| case DST_TYPE_IS_CABLE: |
| otype = "cable"; |
| break; |
| |
| default: |
| dprintk(verbose, DST_INFO, 1, "invalid dst type %d", type); |
| return -EINVAL; |
| } |
| dprintk(verbose, DST_INFO, 1, "DST type: %s", otype); |
| |
| return 0; |
| } |
| |
| /* |
| Known cards list |
| Satellite |
| ------------------- |
| 200103A |
| VP-1020 DST-MOT LG(old), TS=188 |
| |
| VP-1020 DST-03T LG(new), TS=204 |
| VP-1022 DST-03T LG(new), TS=204 |
| VP-1025 DST-03T LG(new), TS=204 |
| |
| VP-1030 DSTMCI, LG(new), TS=188 |
| VP-1032 DSTMCI, LG(new), TS=188 |
| |
| Cable |
| ------------------- |
| VP-2030 DCT-CI, Samsung, TS=204 |
| VP-2021 DCT-CI, Unknown, TS=204 |
| VP-2031 DCT-CI, Philips, TS=188 |
| VP-2040 DCT-CI, Philips, TS=188, with CA daughter board |
| VP-2040 DCT-CI, Philips, TS=204, without CA daughter board |
| |
| Terrestrial |
| ------------------- |
| VP-3050 DTTNXT TS=188 |
| VP-3040 DTT-CI, Philips, TS=188 |
| VP-3040 DTT-CI, Philips, TS=204 |
| |
| ATSC |
| ------------------- |
| VP-3220 ATSCDI, TS=188 |
| VP-3250 ATSCAD, TS=188 |
| |
| */ |
| |
| static struct dst_types dst_tlist[] = { |
| { |
| .device_id = "200103A", |
| .offset = 0, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_OBS_REGS, |
| .dst_feature = 0 |
| }, /* obsolete */ |
| |
| { |
| .device_id = "DST-020", |
| .offset = 0, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, |
| .dst_feature = 0 |
| }, /* obsolete */ |
| |
| { |
| .device_id = "DST-030", |
| .offset = 0, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, |
| .dst_feature = 0 |
| }, /* obsolete */ |
| |
| { |
| .device_id = "DST-03T", |
| .offset = 0, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2, |
| .dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5 |
| | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO |
| }, |
| |
| { |
| .device_id = "DST-MOT", |
| .offset = 0, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, |
| .dst_feature = 0 |
| }, /* obsolete */ |
| |
| { |
| .device_id = "DST-CI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, |
| .dst_feature = DST_TYPE_HAS_CA |
| }, /* An OEM board */ |
| |
| { |
| .device_id = "DSTMCI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_INC_COUNT, |
| .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 |
| | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC |
| }, |
| |
| { |
| .device_id = "DSTFCI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_SAT, |
| .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, |
| .dst_feature = 0 |
| }, /* unknown to vendor */ |
| |
| { |
| .device_id = "DCT-CI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_CABLE, |
| .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1 |
| | DST_TYPE_HAS_FW_2, |
| .dst_feature = DST_TYPE_HAS_CA |
| }, |
| |
| { |
| .device_id = "DCTNEW", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_CABLE, |
| .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_3 | DST_TYPE_HAS_FW_BUILD, |
| .dst_feature = 0 |
| }, |
| |
| { |
| .device_id = "DTT-CI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_TERR, |
| .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_MULTI_FE, |
| .dst_feature = DST_TYPE_HAS_CA |
| }, |
| |
| { |
| .device_id = "DTTDIG", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_TERR, |
| .type_flags = DST_TYPE_HAS_FW_2, |
| .dst_feature = 0 |
| }, |
| |
| { |
| .device_id = "DTTNXT", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_TERR, |
| .type_flags = DST_TYPE_HAS_FW_2, |
| .dst_feature = DST_TYPE_HAS_ANALOG |
| }, |
| |
| { |
| .device_id = "ATSCDI", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_ATSC, |
| .type_flags = DST_TYPE_HAS_FW_2, |
| .dst_feature = 0 |
| }, |
| |
| { |
| .device_id = "ATSCAD", |
| .offset = 1, |
| .dst_type = DST_TYPE_IS_ATSC, |
| .type_flags = DST_TYPE_HAS_FW_2, |
| .dst_feature = 0 |
| }, |
| |
| { } |
| |
| }; |
| |
| static int dst_get_mac(struct dst_state *state) |
| { |
| u8 get_mac[] = { 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| get_mac[7] = dst_check_sum(get_mac, 7); |
| if (dst_command(state, get_mac, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| memset(&state->mac_address, '\0', 8); |
| memcpy(&state->mac_address, &state->rxbuffer, 6); |
| dprintk(verbose, DST_ERROR, 1, "MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]", |
| state->mac_address[0], state->mac_address[1], state->mac_address[2], |
| state->mac_address[4], state->mac_address[5], state->mac_address[6]); |
| |
| return 0; |
| } |
| |
| static int dst_fw_ver(struct dst_state *state) |
| { |
| u8 get_ver[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| get_ver[7] = dst_check_sum(get_ver, 7); |
| if (dst_command(state, get_ver, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| memset(&state->fw_version, '\0', 8); |
| memcpy(&state->fw_version, &state->rxbuffer, 8); |
| dprintk(verbose, DST_ERROR, 1, "Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x", |
| state->fw_version[0] >> 4, state->fw_version[0] & 0x0f, |
| state->fw_version[1], |
| state->fw_version[5], state->fw_version[6], |
| state->fw_version[4], state->fw_version[3], state->fw_version[2]); |
| |
| return 0; |
| } |
| |
| static int dst_card_type(struct dst_state *state) |
| { |
| u8 get_type[] = { 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| get_type[7] = dst_check_sum(get_type, 7); |
| if (dst_command(state, get_type, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| memset(&state->card_info, '\0', 8); |
| memcpy(&state->card_info, &state->rxbuffer, 8); |
| dprintk(verbose, DST_ERROR, 1, "Device Model=[%s]", &state->card_info[0]); |
| |
| return 0; |
| } |
| |
| static int dst_get_vendor(struct dst_state *state) |
| { |
| u8 get_vendor[] = { 0x00, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| get_vendor[7] = dst_check_sum(get_vendor, 7); |
| if (dst_command(state, get_vendor, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| memset(&state->vendor, '\0', 8); |
| memcpy(&state->vendor, &state->rxbuffer, 8); |
| dprintk(verbose, DST_ERROR, 1, "Vendor=[%s]", &state->vendor[0]); |
| |
| return 0; |
| } |
| |
| static int dst_get_tuner_info(struct dst_state *state) |
| { |
| u8 get_tuner_1[] = { 0x00, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| u8 get_tuner_2[] = { 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| |
| get_tuner_1[7] = dst_check_sum(get_tuner_1, 7); |
| get_tuner_2[7] = dst_check_sum(get_tuner_2, 7); |
| if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { |
| if (dst_command(state, get_tuner_2, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| } else { |
| if (dst_command(state, get_tuner_1, 8) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Unsupported Command"); |
| return -1; |
| } |
| } |
| memset(&state->board_info, '\0', 8); |
| memcpy(&state->board_info, &state->rxbuffer, 8); |
| if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { |
| if (state->board_info[1] == 0x0b) { |
| if (state->type_flags & DST_TYPE_HAS_TS204) |
| state->type_flags &= ~DST_TYPE_HAS_TS204; |
| state->type_flags |= DST_TYPE_HAS_NEWTUNE; |
| dprintk(verbose, DST_INFO, 1, "DST type has TS=188"); |
| } else { |
| if (state->type_flags & DST_TYPE_HAS_NEWTUNE) |
| state->type_flags &= ~DST_TYPE_HAS_NEWTUNE; |
| state->type_flags |= DST_TYPE_HAS_TS204; |
| dprintk(verbose, DST_INFO, 1, "DST type has TS=204"); |
| } |
| } else { |
| if (state->board_info[0] == 0xbc) { |
| if (state->type_flags & DST_TYPE_HAS_TS204) |
| state->type_flags &= ~DST_TYPE_HAS_TS204; |
| state->type_flags |= DST_TYPE_HAS_NEWTUNE; |
| dprintk(verbose, DST_INFO, 1, "DST type has TS=188, Daughterboard=[%d]", state->board_info[1]); |
| |
| } else if (state->board_info[0] == 0xcc) { |
| if (state->type_flags & DST_TYPE_HAS_NEWTUNE) |
| state->type_flags &= ~DST_TYPE_HAS_NEWTUNE; |
| state->type_flags |= DST_TYPE_HAS_TS204; |
| dprintk(verbose, DST_INFO, 1, "DST type has TS=204 Daughterboard=[%d]", state->board_info[1]); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dst_get_device_id(struct dst_state *state) |
| { |
| u8 reply; |
| |
| int i; |
| struct dst_types *p_dst_type; |
| u8 use_dst_type = 0; |
| u32 use_type_flags = 0; |
| |
| static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; |
| |
| device_type[7] = dst_check_sum(device_type, 7); |
| |
| if (write_dst(state, device_type, FIXED_COMM)) |
| return -1; /* Write failed */ |
| if ((dst_pio_disable(state)) < 0) |
| return -1; |
| if (read_dst(state, &reply, GET_ACK)) |
| return -1; /* Read failure */ |
| if (reply != ACK) { |
| dprintk(verbose, DST_INFO, 1, "Write not Acknowledged! [Reply=0x%02x]", reply); |
| return -1; /* Unack'd write */ |
| } |
| if (!dst_wait_dst_ready(state, DEVICE_INIT)) |
| return -1; /* DST not ready yet */ |
| if (read_dst(state, state->rxbuffer, FIXED_COMM)) |
| return -1; |
| |
| dst_pio_disable(state); |
| if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { |
| dprintk(verbose, DST_INFO, 1, "Checksum failure!"); |
| return -1; /* Checksum failure */ |
| } |
| state->rxbuffer[7] = '\0'; |
| |
| for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE(dst_tlist); i++, p_dst_type++) { |
| if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) { |
| use_type_flags = p_dst_type->type_flags; |
| use_dst_type = p_dst_type->dst_type; |
| |
| /* Card capabilities */ |
| state->dst_hw_cap = p_dst_type->dst_feature; |
| dprintk(verbose, DST_ERROR, 1, "Recognise [%s]\n", p_dst_type->device_id); |
| |
| break; |
| } |
| } |
| |
| if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) { |
| dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]); |
| dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in"); |
| use_dst_type = DST_TYPE_IS_SAT; |
| use_type_flags = DST_TYPE_HAS_SYMDIV; |
| } |
| dst_type_print(use_dst_type); |
| state->type_flags = use_type_flags; |
| state->dst_type = use_dst_type; |
| dst_type_flags_print(state->type_flags); |
| |
| return 0; |
| } |
| |
| static int dst_probe(struct dst_state *state) |
| { |
| mutex_init(&state->dst_mutex); |
| if ((rdc_8820_reset(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed."); |
| return -1; |
| } |
| if (dst_addons & DST_TYPE_HAS_CA) |
| msleep(4000); |
| else |
| msleep(100); |
| |
| if ((dst_comm_init(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "DST Initialization Failed."); |
| return -1; |
| } |
| msleep(100); |
| if (dst_get_device_id(state) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "unknown device."); |
| return -1; |
| } |
| if (dst_get_mac(state) < 0) { |
| dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command"); |
| return 0; |
| } |
| if ((state->type_flags & DST_TYPE_HAS_MULTI_FE) || (state->type_flags & DST_TYPE_HAS_FW_BUILD)) { |
| if (dst_get_tuner_info(state) < 0) |
| dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command"); |
| } |
| if (state->type_flags & DST_TYPE_HAS_TS204) { |
| dst_packsize(state, 204); |
| } |
| if (state->type_flags & DST_TYPE_HAS_FW_BUILD) { |
| if (dst_fw_ver(state) < 0) { |
| dprintk(verbose, DST_INFO, 1, "FW: Unsupported command"); |
| return 0; |
| } |
| if (dst_card_type(state) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Card: Unsupported command"); |
| return 0; |
| } |
| if (dst_get_vendor(state) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Vendor: Unsupported command"); |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int dst_command(struct dst_state *state, u8 *data, u8 len) |
| { |
| u8 reply; |
| |
| mutex_lock(&state->dst_mutex); |
| if ((dst_comm_init(state)) < 0) { |
| dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed."); |
| goto error; |
| } |
| if (write_dst(state, data, len)) { |
| dprintk(verbose, DST_INFO, 1, "Tring to recover.. "); |
| if ((dst_error_recovery(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); |
| goto error; |
| } |
| goto error; |
| } |
| if ((dst_pio_disable(state)) < 0) { |
| dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed."); |
| goto error; |
| } |
| if (state->type_flags & DST_TYPE_HAS_FW_1) |
| udelay(3000); |
| if (read_dst(state, &reply, GET_ACK)) { |
| dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); |
| if ((dst_error_recovery(state)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Recovery Failed."); |
| goto error; |
| } |
| goto error; |
| } |
| if (reply != ACK) { |
| dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply); |
| goto error; |
| } |
| if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3)) |
| goto error; |
| if (state->type_flags & DST_TYPE_HAS_FW_1) |
| udelay(3000); |
| else |
| udelay(2000); |
| if (!dst_wait_dst_ready(state, NO_DELAY)) |
| goto error; |
| if (read_dst(state, state->rxbuffer, FIXED_COMM)) { |
| dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); |
| if ((dst_error_recovery(state)) < 0) { |
| dprintk(verbose, DST_INFO, 1, "Recovery failed."); |
| goto error; |
| } |
| goto error; |
| } |
| if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { |
| dprintk(verbose, DST_INFO, 1, "checksum failure"); |
| goto error; |
| } |
| mutex_unlock(&state->dst_mutex); |
| return 0; |
| |
| error: |
| mutex_unlock(&state->dst_mutex); |
| return -EIO; |
| |
| } |
| EXPORT_SYMBOL(dst_command); |
| |
| static int dst_get_signal(struct dst_state *state) |
| { |
| int retval; |
| u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb }; |
| //dprintk("%s: Getting Signal strength and other parameters\n", __FUNCTION__); |
| if ((state->diseq_flags & ATTEMPT_TUNE) == 0) { |
| state->decode_lock = state->decode_strength = state->decode_snr = 0; |
| return 0; |
| } |
| if (0 == (state->diseq_flags & HAS_LOCK)) { |
| state->decode_lock = state->decode_strength = state->decode_snr = 0; |
| return 0; |
| } |
| if (time_after_eq(jiffies, state->cur_jiff + (HZ / 5))) { |
| retval = dst_command(state, get_signal, 8); |
| if (retval < 0) |
| return retval; |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| state->decode_lock = ((state->rxbuffer[6] & 0x10) == 0) ? 1 : 0; |
| state->decode_strength = state->rxbuffer[5] << 8; |
| state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3]; |
| } else if ((state->dst_type == DST_TYPE_IS_TERR) || (state->dst_type == DST_TYPE_IS_CABLE)) { |
| state->decode_lock = (state->rxbuffer[1]) ? 1 : 0; |
| state->decode_strength = state->rxbuffer[4] << 8; |
| state->decode_snr = state->rxbuffer[3] << 8; |
| } |
| state->cur_jiff = jiffies; |
| } |
| return 0; |
| } |
| |
| static int dst_tone_power_cmd(struct dst_state *state) |
| { |
| u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; |
| |
| if (state->dst_type == DST_TYPE_IS_TERR) |
| return 0; |
| paket[4] = state->tx_tuna[4]; |
| paket[2] = state->tx_tuna[2]; |
| paket[3] = state->tx_tuna[3]; |
| paket[7] = dst_check_sum (paket, 7); |
| dst_command(state, paket, 8); |
| |
| return 0; |
| } |
| |
| static int dst_get_tuna(struct dst_state *state) |
| { |
| int retval; |
| |
| if ((state->diseq_flags & ATTEMPT_TUNE) == 0) |
| return 0; |
| state->diseq_flags &= ~(HAS_LOCK); |
| if (!dst_wait_dst_ready(state, NO_DELAY)) |
| return -EIO; |
| if (state->type_flags & DST_TYPE_HAS_NEWTUNE) |
| /* how to get variable length reply ???? */ |
| retval = read_dst(state, state->rx_tuna, 10); |
| else |
| retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM); |
| if (retval < 0) { |
| dprintk(verbose, DST_DEBUG, 1, "read not successful"); |
| return retval; |
| } |
| if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { |
| if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) { |
| dprintk(verbose, DST_INFO, 1, "checksum failure ? "); |
| return -EIO; |
| } |
| } else { |
| if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) { |
| dprintk(verbose, DST_INFO, 1, "checksum failure? "); |
| return -EIO; |
| } |
| } |
| if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0) |
| return 0; |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3]; |
| } else { |
| state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 16) + (state->rx_tuna[3] << 8) + state->rx_tuna[4]; |
| } |
| state->decode_freq = state->decode_freq * 1000; |
| state->decode_lock = 1; |
| state->diseq_flags |= HAS_LOCK; |
| |
| return 1; |
| } |
| |
| static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); |
| |
| static int dst_write_tuna(struct dvb_frontend *fe) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| int retval; |
| u8 reply; |
| |
| dprintk(verbose, DST_INFO, 1, "type_flags 0x%x ", state->type_flags); |
| state->decode_freq = 0; |
| state->decode_lock = state->decode_strength = state->decode_snr = 0; |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| if (!(state->diseq_flags & HAS_POWER)) |
| dst_set_voltage(fe, SEC_VOLTAGE_13); |
| } |
| state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE); |
| mutex_lock(&state->dst_mutex); |
| if ((dst_comm_init(state)) < 0) { |
| dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed."); |
| goto error; |
| } |
| if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { |
| state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9); |
| retval = write_dst(state, &state->tx_tuna[0], 10); |
| } else { |
| state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7); |
| retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM); |
| } |
| if (retval < 0) { |
| dst_pio_disable(state); |
| dprintk(verbose, DST_DEBUG, 1, "write not successful"); |
| goto werr; |
| } |
| if ((dst_pio_disable(state)) < 0) { |
| dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !"); |
| goto error; |
| } |
| if ((read_dst(state, &reply, GET_ACK) < 0)) { |
| dprintk(verbose, DST_DEBUG, 1, "read verify not successful."); |
| goto error; |
| } |
| if (reply != ACK) { |
| dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply); |
| goto error; |
| } |
| state->diseq_flags |= ATTEMPT_TUNE; |
| retval = dst_get_tuna(state); |
| werr: |
| mutex_unlock(&state->dst_mutex); |
| return retval; |
| |
| error: |
| mutex_unlock(&state->dst_mutex); |
| return -EIO; |
| } |
| |
| /* |
| * line22k0 0x00, 0x09, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00 |
| * line22k1 0x00, 0x09, 0x01, 0xff, 0x01, 0x00, 0x00, 0x00 |
| * line22k2 0x00, 0x09, 0x02, 0xff, 0x01, 0x00, 0x00, 0x00 |
| * tone 0x00, 0x09, 0xff, 0x00, 0x01, 0x00, 0x00, 0x00 |
| * data 0x00, 0x09, 0xff, 0x01, 0x01, 0x00, 0x00, 0x00 |
| * power_off 0x00, 0x09, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 |
| * power_on 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 |
| * Diseqc 1 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec |
| * Diseqc 2 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf4, 0xe8 |
| * Diseqc 3 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf8, 0xe4 |
| * Diseqc 4 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xfc, 0xe0 |
| */ |
| |
| static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; |
| |
| if (state->dst_type != DST_TYPE_IS_SAT) |
| return 0; |
| if (cmd->msg_len == 0 || cmd->msg_len > 4) |
| return -EINVAL; |
| memcpy(&paket[3], cmd->msg, cmd->msg_len); |
| paket[7] = dst_check_sum(&paket[0], 7); |
| dst_command(state, paket, 8); |
| return 0; |
| } |
| |
| static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| int need_cmd; |
| struct dst_state *state = fe->demodulator_priv; |
| |
| state->voltage = voltage; |
| if (state->dst_type != DST_TYPE_IS_SAT) |
| return 0; |
| |
| need_cmd = 0; |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| case SEC_VOLTAGE_18: |
| if ((state->diseq_flags & HAS_POWER) == 0) |
| need_cmd = 1; |
| state->diseq_flags |= HAS_POWER; |
| state->tx_tuna[4] = 0x01; |
| break; |
| case SEC_VOLTAGE_OFF: |
| need_cmd = 1; |
| state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); |
| state->tx_tuna[4] = 0x00; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (need_cmd) |
| dst_tone_power_cmd(state); |
| |
| return 0; |
| } |
| |
| static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| state->tone = tone; |
| if (state->dst_type != DST_TYPE_IS_SAT) |
| return 0; |
| |
| switch (tone) { |
| case SEC_TONE_OFF: |
| if (state->type_flags & DST_TYPE_HAS_OBS_REGS) |
| state->tx_tuna[2] = 0x00; |
| else |
| state->tx_tuna[2] = 0xff; |
| break; |
| |
| case SEC_TONE_ON: |
| state->tx_tuna[2] = 0x02; |
| break; |
| default: |
| return -EINVAL; |
| } |
| dst_tone_power_cmd(state); |
| |
| return 0; |
| } |
| |
| static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| if (state->dst_type != DST_TYPE_IS_SAT) |
| return 0; |
| state->minicmd = minicmd; |
| switch (minicmd) { |
| case SEC_MINI_A: |
| state->tx_tuna[3] = 0x02; |
| break; |
| case SEC_MINI_B: |
| state->tx_tuna[3] = 0xff; |
| break; |
| } |
| dst_tone_power_cmd(state); |
| |
| return 0; |
| } |
| |
| |
| static int dst_init(struct dvb_frontend *fe) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| static u8 sat_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x00, 0x73, 0x21, 0x00, 0x00 }; |
| static u8 sat_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x55, 0xbd, 0x50, 0x00, 0x00 }; |
| static u8 ter_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; |
| static u8 ter_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; |
| static u8 cab_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; |
| static u8 cab_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 }; |
| |
| state->inversion = INVERSION_OFF; |
| state->voltage = SEC_VOLTAGE_13; |
| state->tone = SEC_TONE_OFF; |
| state->diseq_flags = 0; |
| state->k22 = 0x02; |
| state->bandwidth = BANDWIDTH_7_MHZ; |
| state->cur_jiff = jiffies; |
| if (state->dst_type == DST_TYPE_IS_SAT) |
| memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_NEWTUNE) ? sat_tuna_188 : sat_tuna_204), sizeof (sat_tuna_204)); |
| else if (state->dst_type == DST_TYPE_IS_TERR) |
| memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_NEWTUNE) ? ter_tuna_188 : ter_tuna_204), sizeof (ter_tuna_204)); |
| else if (state->dst_type == DST_TYPE_IS_CABLE) |
| memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_NEWTUNE) ? cab_tuna_188 : cab_tuna_204), sizeof (cab_tuna_204)); |
| |
| return 0; |
| } |
| |
| static int dst_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| *status = 0; |
| if (state->diseq_flags & HAS_LOCK) { |
| // dst_get_signal(state); // don't require(?) to ask MCU |
| if (state->decode_lock) |
| *status |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC | FE_HAS_VITERBI; |
| } |
| |
| return 0; |
| } |
| |
| static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| dst_get_signal(state); |
| *strength = state->decode_strength; |
| |
| return 0; |
| } |
| |
| static int dst_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| dst_get_signal(state); |
| *snr = state->decode_snr; |
| |
| return 0; |
| } |
| |
| static int dst_set_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters* p, |
| unsigned int mode_flags, |
| int *delay, |
| fe_status_t *status) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| if (p != NULL) { |
| dst_set_freq(state, p->frequency); |
| dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); |
| |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| if (state->type_flags & DST_TYPE_HAS_OBS_REGS) |
| dst_set_inversion(state, p->inversion); |
| dst_set_fec(state, p->u.qpsk.fec_inner); |
| dst_set_symbolrate(state, p->u.qpsk.symbol_rate); |
| dst_set_polarization(state); |
| dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->u.qpsk.symbol_rate); |
| |
| } else if (state->dst_type == DST_TYPE_IS_TERR) |
| dst_set_bandwidth(state, p->u.ofdm.bandwidth); |
| else if (state->dst_type == DST_TYPE_IS_CABLE) { |
| dst_set_fec(state, p->u.qam.fec_inner); |
| dst_set_symbolrate(state, p->u.qam.symbol_rate); |
| dst_set_modulation(state, p->u.qam.modulation); |
| } |
| dst_write_tuna(fe); |
| } |
| |
| if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) |
| dst_read_status(fe, status); |
| |
| *delay = HZ/10; |
| return 0; |
| } |
| |
| static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| |
| p->frequency = state->decode_freq; |
| if (state->dst_type == DST_TYPE_IS_SAT) { |
| if (state->type_flags & DST_TYPE_HAS_OBS_REGS) |
| p->inversion = state->inversion; |
| p->u.qpsk.symbol_rate = state->symbol_rate; |
| p->u.qpsk.fec_inner = dst_get_fec(state); |
| } else if (state->dst_type == DST_TYPE_IS_TERR) { |
| p->u.ofdm.bandwidth = state->bandwidth; |
| } else if (state->dst_type == DST_TYPE_IS_CABLE) { |
| p->u.qam.symbol_rate = state->symbol_rate; |
| p->u.qam.fec_inner = dst_get_fec(state); |
| p->u.qam.modulation = dst_get_modulation(state); |
| } |
| |
| return 0; |
| } |
| |
| static void dst_release(struct dvb_frontend *fe) |
| { |
| struct dst_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops dst_dvbt_ops; |
| static struct dvb_frontend_ops dst_dvbs_ops; |
| static struct dvb_frontend_ops dst_dvbc_ops; |
| |
| struct dst_state *dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter) |
| { |
| /* check if the ASIC is there */ |
| if (dst_probe(state) < 0) { |
| kfree(state); |
| return NULL; |
| } |
| /* determine settings based on type */ |
| /* create dvb_frontend */ |
| switch (state->dst_type) { |
| case DST_TYPE_IS_TERR: |
| memcpy(&state->frontend.ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops)); |
| break; |
| case DST_TYPE_IS_CABLE: |
| memcpy(&state->frontend.ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops)); |
| break; |
| case DST_TYPE_IS_SAT: |
| memcpy(&state->frontend.ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops)); |
| break; |
| default: |
| dprintk(verbose, DST_ERROR, 1, "unknown DST type. please report to the LinuxTV.org DVB mailinglist."); |
| kfree(state); |
| return NULL; |
| } |
| state->frontend.demodulator_priv = state; |
| |
| return state; /* Manu (DST is a card not a frontend) */ |
| } |
| |
| EXPORT_SYMBOL(dst_attach); |
| |
| static struct dvb_frontend_ops dst_dvbt_ops = { |
| |
| .info = { |
| .name = "DST DVB-T", |
| .type = FE_OFDM, |
| .frequency_min = 137000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 166667, |
| .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
| }, |
| |
| .release = dst_release, |
| .init = dst_init, |
| .tune = dst_set_frontend, |
| .get_frontend = dst_get_frontend, |
| .read_status = dst_read_status, |
| .read_signal_strength = dst_read_signal_strength, |
| .read_snr = dst_read_snr, |
| }; |
| |
| static struct dvb_frontend_ops dst_dvbs_ops = { |
| |
| .info = { |
| .name = "DST DVB-S", |
| .type = FE_QPSK, |
| .frequency_min = 950000, |
| .frequency_max = 2150000, |
| .frequency_stepsize = 1000, /* kHz for QPSK frontends */ |
| .frequency_tolerance = 29500, |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 45000000, |
| /* . symbol_rate_tolerance = ???,*/ |
| .caps = FE_CAN_FEC_AUTO | FE_CAN_QPSK |
| }, |
| |
| .release = dst_release, |
| .init = dst_init, |
| .tune = dst_set_frontend, |
| .get_frontend = dst_get_frontend, |
| .read_status = dst_read_status, |
| .read_signal_strength = dst_read_signal_strength, |
| .read_snr = dst_read_snr, |
| .diseqc_send_burst = dst_send_burst, |
| .diseqc_send_master_cmd = dst_set_diseqc, |
| .set_voltage = dst_set_voltage, |
| .set_tone = dst_set_tone, |
| }; |
| |
| static struct dvb_frontend_ops dst_dvbc_ops = { |
| |
| .info = { |
| .name = "DST DVB-C", |
| .type = FE_QAM, |
| .frequency_stepsize = 62500, |
| .frequency_min = 51000000, |
| .frequency_max = 858000000, |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 45000000, |
| /* . symbol_rate_tolerance = ???,*/ |
| .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO |
| }, |
| |
| .release = dst_release, |
| .init = dst_init, |
| .tune = dst_set_frontend, |
| .get_frontend = dst_get_frontend, |
| .read_status = dst_read_status, |
| .read_signal_strength = dst_read_signal_strength, |
| .read_snr = dst_read_snr, |
| }; |
| |
| MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver"); |
| MODULE_AUTHOR("Jamie Honan, Manu Abraham"); |
| MODULE_LICENSE("GPL"); |