| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2018 Intel Corp |
| * |
| * Author: |
| * Manasi Navare <manasi.d.navare@intel.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/byteorder/generic.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_dp_helper.h> |
| #include <drm/drm_dsc.h> |
| |
| /** |
| * DOC: dsc helpers |
| * |
| * VESA specification for DP 1.4 adds a new feature called Display Stream |
| * Compression (DSC) used to compress the pixel bits before sending it on |
| * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing |
| * display interfaces can support high resolutions at higher frames rates uisng |
| * the maximum available link capacity of these interfaces. |
| * |
| * These functions contain some common logic and helpers to deal with VESA |
| * Display Stream Compression standard required for DSC on Display Port/eDP or |
| * MIPI display interfaces. |
| */ |
| |
| /** |
| * drm_dsc_dp_pps_header_init() - Initializes the PPS Header |
| * for DisplayPort as per the DP 1.4 spec. |
| * @pps_header: Secondary data packet header for DSC Picture |
| * Parameter Set as defined in &struct dp_sdp_header |
| * |
| * DP 1.4 spec defines the secondary data packet for sending the |
| * picture parameter infoframes from the source to the sink. |
| * This function populates the SDP header defined in |
| * &struct dp_sdp_header. |
| */ |
| void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header) |
| { |
| memset(pps_header, 0, sizeof(*pps_header)); |
| |
| pps_header->HB1 = DP_SDP_PPS; |
| pps_header->HB2 = DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1; |
| } |
| EXPORT_SYMBOL(drm_dsc_dp_pps_header_init); |
| |
| /** |
| * drm_dsc_dp_rc_buffer_size - get rc buffer size in bytes |
| * @rc_buffer_block_size: block size code, according to DPCD offset 62h |
| * @rc_buffer_size: number of blocks - 1, according to DPCD offset 63h |
| * |
| * return: |
| * buffer size in bytes, or 0 on invalid input |
| */ |
| int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size) |
| { |
| int size = 1024 * (rc_buffer_size + 1); |
| |
| switch (rc_buffer_block_size) { |
| case DP_DSC_RC_BUF_BLK_SIZE_1: |
| return 1 * size; |
| case DP_DSC_RC_BUF_BLK_SIZE_4: |
| return 4 * size; |
| case DP_DSC_RC_BUF_BLK_SIZE_16: |
| return 16 * size; |
| case DP_DSC_RC_BUF_BLK_SIZE_64: |
| return 64 * size; |
| default: |
| return 0; |
| } |
| } |
| EXPORT_SYMBOL(drm_dsc_dp_rc_buffer_size); |
| |
| /** |
| * drm_dsc_pps_payload_pack() - Populates the DSC PPS |
| * |
| * @pps_payload: |
| * Bitwise struct for DSC Picture Parameter Set. This is defined |
| * by &struct drm_dsc_picture_parameter_set |
| * @dsc_cfg: |
| * DSC Configuration data filled by driver as defined by |
| * &struct drm_dsc_config |
| * |
| * DSC source device sends a picture parameter set (PPS) containing the |
| * information required by the sink to decode the compressed frame. Driver |
| * populates the DSC PPS struct using the DSC configuration parameters in |
| * the order expected by the DSC Display Sink device. For the DSC, the sink |
| * device expects the PPS payload in big endian format for fields |
| * that span more than 1 byte. |
| */ |
| void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload, |
| const struct drm_dsc_config *dsc_cfg) |
| { |
| int i; |
| |
| /* Protect against someone accidentally changing struct size */ |
| BUILD_BUG_ON(sizeof(*pps_payload) != |
| DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 + 1); |
| |
| memset(pps_payload, 0, sizeof(*pps_payload)); |
| |
| /* PPS 0 */ |
| pps_payload->dsc_version = |
| dsc_cfg->dsc_version_minor | |
| dsc_cfg->dsc_version_major << DSC_PPS_VERSION_MAJOR_SHIFT; |
| |
| /* PPS 1, 2 is 0 */ |
| |
| /* PPS 3 */ |
| pps_payload->pps_3 = |
| dsc_cfg->line_buf_depth | |
| dsc_cfg->bits_per_component << DSC_PPS_BPC_SHIFT; |
| |
| /* PPS 4 */ |
| pps_payload->pps_4 = |
| ((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >> |
| DSC_PPS_MSB_SHIFT) | |
| dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT | |
| dsc_cfg->simple_422 << DSC_PPS_SIMPLE422_SHIFT | |
| dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT | |
| dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT; |
| |
| /* PPS 5 */ |
| pps_payload->bits_per_pixel_low = |
| (dsc_cfg->bits_per_pixel & DSC_PPS_LSB_MASK); |
| |
| /* |
| * The DSC panel expects the PPS packet to have big endian format |
| * for data spanning 2 bytes. Use a macro cpu_to_be16() to convert |
| * to big endian format. If format is little endian, it will swap |
| * bytes to convert to Big endian else keep it unchanged. |
| */ |
| |
| /* PPS 6, 7 */ |
| pps_payload->pic_height = cpu_to_be16(dsc_cfg->pic_height); |
| |
| /* PPS 8, 9 */ |
| pps_payload->pic_width = cpu_to_be16(dsc_cfg->pic_width); |
| |
| /* PPS 10, 11 */ |
| pps_payload->slice_height = cpu_to_be16(dsc_cfg->slice_height); |
| |
| /* PPS 12, 13 */ |
| pps_payload->slice_width = cpu_to_be16(dsc_cfg->slice_width); |
| |
| /* PPS 14, 15 */ |
| pps_payload->chunk_size = cpu_to_be16(dsc_cfg->slice_chunk_size); |
| |
| /* PPS 16 */ |
| pps_payload->initial_xmit_delay_high = |
| ((dsc_cfg->initial_xmit_delay & |
| DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK) >> |
| DSC_PPS_MSB_SHIFT); |
| |
| /* PPS 17 */ |
| pps_payload->initial_xmit_delay_low = |
| (dsc_cfg->initial_xmit_delay & DSC_PPS_LSB_MASK); |
| |
| /* PPS 18, 19 */ |
| pps_payload->initial_dec_delay = |
| cpu_to_be16(dsc_cfg->initial_dec_delay); |
| |
| /* PPS 20 is 0 */ |
| |
| /* PPS 21 */ |
| pps_payload->initial_scale_value = |
| dsc_cfg->initial_scale_value; |
| |
| /* PPS 22, 23 */ |
| pps_payload->scale_increment_interval = |
| cpu_to_be16(dsc_cfg->scale_increment_interval); |
| |
| /* PPS 24 */ |
| pps_payload->scale_decrement_interval_high = |
| ((dsc_cfg->scale_decrement_interval & |
| DSC_PPS_SCALE_DEC_INT_HIGH_MASK) >> |
| DSC_PPS_MSB_SHIFT); |
| |
| /* PPS 25 */ |
| pps_payload->scale_decrement_interval_low = |
| (dsc_cfg->scale_decrement_interval & DSC_PPS_LSB_MASK); |
| |
| /* PPS 26[7:0], PPS 27[7:5] RESERVED */ |
| |
| /* PPS 27 */ |
| pps_payload->first_line_bpg_offset = |
| dsc_cfg->first_line_bpg_offset; |
| |
| /* PPS 28, 29 */ |
| pps_payload->nfl_bpg_offset = |
| cpu_to_be16(dsc_cfg->nfl_bpg_offset); |
| |
| /* PPS 30, 31 */ |
| pps_payload->slice_bpg_offset = |
| cpu_to_be16(dsc_cfg->slice_bpg_offset); |
| |
| /* PPS 32, 33 */ |
| pps_payload->initial_offset = |
| cpu_to_be16(dsc_cfg->initial_offset); |
| |
| /* PPS 34, 35 */ |
| pps_payload->final_offset = cpu_to_be16(dsc_cfg->final_offset); |
| |
| /* PPS 36 */ |
| pps_payload->flatness_min_qp = dsc_cfg->flatness_min_qp; |
| |
| /* PPS 37 */ |
| pps_payload->flatness_max_qp = dsc_cfg->flatness_max_qp; |
| |
| /* PPS 38, 39 */ |
| pps_payload->rc_model_size = cpu_to_be16(dsc_cfg->rc_model_size); |
| |
| /* PPS 40 */ |
| pps_payload->rc_edge_factor = DSC_RC_EDGE_FACTOR_CONST; |
| |
| /* PPS 41 */ |
| pps_payload->rc_quant_incr_limit0 = |
| dsc_cfg->rc_quant_incr_limit0; |
| |
| /* PPS 42 */ |
| pps_payload->rc_quant_incr_limit1 = |
| dsc_cfg->rc_quant_incr_limit1; |
| |
| /* PPS 43 */ |
| pps_payload->rc_tgt_offset = DSC_RC_TGT_OFFSET_LO_CONST | |
| DSC_RC_TGT_OFFSET_HI_CONST << DSC_PPS_RC_TGT_OFFSET_HI_SHIFT; |
| |
| /* PPS 44 - 57 */ |
| for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) |
| pps_payload->rc_buf_thresh[i] = |
| dsc_cfg->rc_buf_thresh[i]; |
| |
| /* PPS 58 - 87 */ |
| /* |
| * For DSC sink programming the RC Range parameter fields |
| * are as follows: Min_qp[15:11], max_qp[10:6], offset[5:0] |
| */ |
| for (i = 0; i < DSC_NUM_BUF_RANGES; i++) { |
| pps_payload->rc_range_parameters[i] = |
| cpu_to_be16((dsc_cfg->rc_range_params[i].range_min_qp << |
| DSC_PPS_RC_RANGE_MINQP_SHIFT) | |
| (dsc_cfg->rc_range_params[i].range_max_qp << |
| DSC_PPS_RC_RANGE_MAXQP_SHIFT) | |
| (dsc_cfg->rc_range_params[i].range_bpg_offset)); |
| } |
| |
| /* PPS 88 */ |
| pps_payload->native_422_420 = dsc_cfg->native_422 | |
| dsc_cfg->native_420 << DSC_PPS_NATIVE_420_SHIFT; |
| |
| /* PPS 89 */ |
| pps_payload->second_line_bpg_offset = |
| dsc_cfg->second_line_bpg_offset; |
| |
| /* PPS 90, 91 */ |
| pps_payload->nsl_bpg_offset = |
| cpu_to_be16(dsc_cfg->nsl_bpg_offset); |
| |
| /* PPS 92, 93 */ |
| pps_payload->second_line_offset_adj = |
| cpu_to_be16(dsc_cfg->second_line_offset_adj); |
| |
| /* PPS 94 - 127 are O */ |
| } |
| EXPORT_SYMBOL(drm_dsc_pps_payload_pack); |
| |
| /** |
| * drm_dsc_compute_rc_parameters() - Write rate control |
| * parameters to the dsc configuration defined in |
| * &struct drm_dsc_config in accordance with the DSC 1.2 |
| * specification. Some configuration fields must be present |
| * beforehand. |
| * |
| * @vdsc_cfg: |
| * DSC Configuration data partially filled by driver |
| */ |
| int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg) |
| { |
| unsigned long groups_per_line = 0; |
| unsigned long groups_total = 0; |
| unsigned long num_extra_mux_bits = 0; |
| unsigned long slice_bits = 0; |
| unsigned long hrd_delay = 0; |
| unsigned long final_scale = 0; |
| unsigned long rbs_min = 0; |
| |
| if (vdsc_cfg->native_420 || vdsc_cfg->native_422) { |
| /* Number of groups used to code each line of a slice */ |
| groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width / 2, |
| DSC_RC_PIXELS_PER_GROUP); |
| |
| /* chunksize in Bytes */ |
| vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width / 2 * |
| vdsc_cfg->bits_per_pixel, |
| (8 * 16)); |
| } else { |
| /* Number of groups used to code each line of a slice */ |
| groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width, |
| DSC_RC_PIXELS_PER_GROUP); |
| |
| /* chunksize in Bytes */ |
| vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width * |
| vdsc_cfg->bits_per_pixel, |
| (8 * 16)); |
| } |
| |
| if (vdsc_cfg->convert_rgb) |
| num_extra_mux_bits = 3 * (vdsc_cfg->mux_word_size + |
| (4 * vdsc_cfg->bits_per_component + 4) |
| - 2); |
| else if (vdsc_cfg->native_422) |
| num_extra_mux_bits = 4 * vdsc_cfg->mux_word_size + |
| (4 * vdsc_cfg->bits_per_component + 4) + |
| 3 * (4 * vdsc_cfg->bits_per_component) - 2; |
| else |
| num_extra_mux_bits = 3 * vdsc_cfg->mux_word_size + |
| (4 * vdsc_cfg->bits_per_component + 4) + |
| 2 * (4 * vdsc_cfg->bits_per_component) - 2; |
| /* Number of bits in one Slice */ |
| slice_bits = 8 * vdsc_cfg->slice_chunk_size * vdsc_cfg->slice_height; |
| |
| while ((num_extra_mux_bits > 0) && |
| ((slice_bits - num_extra_mux_bits) % vdsc_cfg->mux_word_size)) |
| num_extra_mux_bits--; |
| |
| if (groups_per_line < vdsc_cfg->initial_scale_value - 8) |
| vdsc_cfg->initial_scale_value = groups_per_line + 8; |
| |
| /* scale_decrement_interval calculation according to DSC spec 1.11 */ |
| if (vdsc_cfg->initial_scale_value > 8) |
| vdsc_cfg->scale_decrement_interval = groups_per_line / |
| (vdsc_cfg->initial_scale_value - 8); |
| else |
| vdsc_cfg->scale_decrement_interval = DSC_SCALE_DECREMENT_INTERVAL_MAX; |
| |
| vdsc_cfg->final_offset = vdsc_cfg->rc_model_size - |
| (vdsc_cfg->initial_xmit_delay * |
| vdsc_cfg->bits_per_pixel + 8) / 16 + num_extra_mux_bits; |
| |
| if (vdsc_cfg->final_offset >= vdsc_cfg->rc_model_size) { |
| DRM_DEBUG_KMS("FinalOfs < RcModelSze for this InitialXmitDelay\n"); |
| return -ERANGE; |
| } |
| |
| final_scale = (vdsc_cfg->rc_model_size * 8) / |
| (vdsc_cfg->rc_model_size - vdsc_cfg->final_offset); |
| if (vdsc_cfg->slice_height > 1) |
| /* |
| * NflBpgOffset is 16 bit value with 11 fractional bits |
| * hence we multiply by 2^11 for preserving the |
| * fractional part |
| */ |
| vdsc_cfg->nfl_bpg_offset = DIV_ROUND_UP((vdsc_cfg->first_line_bpg_offset << 11), |
| (vdsc_cfg->slice_height - 1)); |
| else |
| vdsc_cfg->nfl_bpg_offset = 0; |
| |
| /* Number of groups used to code the entire slice */ |
| groups_total = groups_per_line * vdsc_cfg->slice_height; |
| |
| /* slice_bpg_offset is 16 bit value with 11 fractional bits */ |
| vdsc_cfg->slice_bpg_offset = DIV_ROUND_UP(((vdsc_cfg->rc_model_size - |
| vdsc_cfg->initial_offset + |
| num_extra_mux_bits) << 11), |
| groups_total); |
| |
| if (final_scale > 9) { |
| /* |
| * ScaleIncrementInterval = |
| * finaloffset/((NflBpgOffset + SliceBpgOffset)*8(finalscale - 1.125)) |
| * as (NflBpgOffset + SliceBpgOffset) has 11 bit fractional value, |
| * we need divide by 2^11 from pstDscCfg values |
| */ |
| vdsc_cfg->scale_increment_interval = |
| (vdsc_cfg->final_offset * (1 << 11)) / |
| ((vdsc_cfg->nfl_bpg_offset + |
| vdsc_cfg->slice_bpg_offset) * |
| (final_scale - 9)); |
| } else { |
| /* |
| * If finalScaleValue is less than or equal to 9, a value of 0 should |
| * be used to disable the scale increment at the end of the slice |
| */ |
| vdsc_cfg->scale_increment_interval = 0; |
| } |
| |
| /* |
| * DSC spec mentions that bits_per_pixel specifies the target |
| * bits/pixel (bpp) rate that is used by the encoder, |
| * in steps of 1/16 of a bit per pixel |
| */ |
| rbs_min = vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset + |
| DIV_ROUND_UP(vdsc_cfg->initial_xmit_delay * |
| vdsc_cfg->bits_per_pixel, 16) + |
| groups_per_line * vdsc_cfg->first_line_bpg_offset; |
| |
| hrd_delay = DIV_ROUND_UP((rbs_min * 16), vdsc_cfg->bits_per_pixel); |
| vdsc_cfg->rc_bits = (hrd_delay * vdsc_cfg->bits_per_pixel) / 16; |
| vdsc_cfg->initial_dec_delay = hrd_delay - vdsc_cfg->initial_xmit_delay; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dsc_compute_rc_parameters); |