| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2017 Free Electrons |
| * Copyright (C) 2017 NextThing Co |
| * |
| * Author: Boris Brezillon <boris.brezillon@free-electrons.com> |
| */ |
| |
| #include "internals.h" |
| |
| /* Bit for detecting BENAND */ |
| #define TOSHIBA_NAND_ID4_IS_BENAND BIT(7) |
| |
| /* Recommended to rewrite for BENAND */ |
| #define TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED BIT(3) |
| |
| /* ECC Status Read Command for BENAND */ |
| #define TOSHIBA_NAND_CMD_ECC_STATUS_READ 0x7A |
| |
| /* ECC Status Mask for BENAND */ |
| #define TOSHIBA_NAND_ECC_STATUS_MASK 0x0F |
| |
| /* Uncorrectable Error for BENAND */ |
| #define TOSHIBA_NAND_ECC_STATUS_UNCORR 0x0F |
| |
| /* Max ECC Steps for BENAND */ |
| #define TOSHIBA_NAND_MAX_ECC_STEPS 8 |
| |
| static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip, |
| u8 *buf) |
| { |
| u8 *ecc_status = buf; |
| |
| if (nand_has_exec_op(chip)) { |
| const struct nand_sdr_timings *sdr = |
| nand_get_sdr_timings(nand_get_interface_config(chip)); |
| struct nand_op_instr instrs[] = { |
| NAND_OP_CMD(TOSHIBA_NAND_CMD_ECC_STATUS_READ, |
| PSEC_TO_NSEC(sdr->tADL_min)), |
| NAND_OP_8BIT_DATA_IN(chip->ecc.steps, ecc_status, 0), |
| }; |
| struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs); |
| |
| return nand_exec_op(chip, &op); |
| } |
| |
| return -ENOTSUPP; |
| } |
| |
| static int toshiba_nand_benand_eccstatus(struct nand_chip *chip) |
| { |
| struct mtd_info *mtd = nand_to_mtd(chip); |
| int ret; |
| unsigned int max_bitflips = 0; |
| u8 status, ecc_status[TOSHIBA_NAND_MAX_ECC_STEPS]; |
| |
| /* Check Status */ |
| ret = toshiba_nand_benand_read_eccstatus_op(chip, ecc_status); |
| if (!ret) { |
| unsigned int i, bitflips = 0; |
| |
| for (i = 0; i < chip->ecc.steps; i++) { |
| bitflips = ecc_status[i] & TOSHIBA_NAND_ECC_STATUS_MASK; |
| if (bitflips == TOSHIBA_NAND_ECC_STATUS_UNCORR) { |
| mtd->ecc_stats.failed++; |
| } else { |
| mtd->ecc_stats.corrected += bitflips; |
| max_bitflips = max(max_bitflips, bitflips); |
| } |
| } |
| |
| return max_bitflips; |
| } |
| |
| /* |
| * Fallback to regular status check if |
| * toshiba_nand_benand_read_eccstatus_op() failed. |
| */ |
| ret = nand_status_op(chip, &status); |
| if (ret) |
| return ret; |
| |
| if (status & NAND_STATUS_FAIL) { |
| /* uncorrected */ |
| mtd->ecc_stats.failed++; |
| } else if (status & TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED) { |
| /* corrected */ |
| max_bitflips = mtd->bitflip_threshold; |
| mtd->ecc_stats.corrected += max_bitflips; |
| } |
| |
| return max_bitflips; |
| } |
| |
| static int |
| toshiba_nand_read_page_benand(struct nand_chip *chip, uint8_t *buf, |
| int oob_required, int page) |
| { |
| int ret; |
| |
| ret = nand_read_page_raw(chip, buf, oob_required, page); |
| if (ret) |
| return ret; |
| |
| return toshiba_nand_benand_eccstatus(chip); |
| } |
| |
| static int |
| toshiba_nand_read_subpage_benand(struct nand_chip *chip, uint32_t data_offs, |
| uint32_t readlen, uint8_t *bufpoi, int page) |
| { |
| int ret; |
| |
| ret = nand_read_page_op(chip, page, data_offs, |
| bufpoi + data_offs, readlen); |
| if (ret) |
| return ret; |
| |
| return toshiba_nand_benand_eccstatus(chip); |
| } |
| |
| static void toshiba_nand_benand_init(struct nand_chip *chip) |
| { |
| struct mtd_info *mtd = nand_to_mtd(chip); |
| |
| /* |
| * On BENAND, the entire OOB region can be used by the MTD user. |
| * The calculated ECC bytes are stored into other isolated |
| * area which is not accessible to users. |
| * This is why chip->ecc.bytes = 0. |
| */ |
| chip->ecc.bytes = 0; |
| chip->ecc.size = 512; |
| chip->ecc.strength = 8; |
| chip->ecc.read_page = toshiba_nand_read_page_benand; |
| chip->ecc.read_subpage = toshiba_nand_read_subpage_benand; |
| chip->ecc.write_page = nand_write_page_raw; |
| chip->ecc.read_page_raw = nand_read_page_raw_notsupp; |
| chip->ecc.write_page_raw = nand_write_page_raw_notsupp; |
| |
| chip->options |= NAND_SUBPAGE_READ; |
| |
| mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout()); |
| } |
| |
| static void toshiba_nand_decode_id(struct nand_chip *chip) |
| { |
| struct nand_device *base = &chip->base; |
| struct nand_ecc_props requirements = {}; |
| struct mtd_info *mtd = nand_to_mtd(chip); |
| struct nand_memory_organization *memorg; |
| |
| memorg = nanddev_get_memorg(&chip->base); |
| |
| nand_decode_ext_id(chip); |
| |
| /* |
| * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per |
| * 512B page. For Toshiba SLC, we decode the 5th/6th byte as |
| * follows: |
| * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm, |
| * 110b -> 24nm |
| * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC |
| */ |
| if (chip->id.len >= 6 && nand_is_slc(chip) && |
| (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ && |
| !(chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND) /* !BENAND */) { |
| memorg->oobsize = 32 * memorg->pagesize >> 9; |
| mtd->oobsize = memorg->oobsize; |
| } |
| |
| /* |
| * Extract ECC requirements from 6th id byte. |
| * For Toshiba SLC, ecc requrements are as follows: |
| * - 43nm: 1 bit ECC for each 512Byte is required. |
| * - 32nm: 4 bit ECC for each 512Byte is required. |
| * - 24nm: 8 bit ECC for each 512Byte is required. |
| */ |
| if (chip->id.len >= 6 && nand_is_slc(chip)) { |
| requirements.step_size = 512; |
| switch (chip->id.data[5] & 0x7) { |
| case 0x4: |
| requirements.strength = 1; |
| break; |
| case 0x5: |
| requirements.strength = 4; |
| break; |
| case 0x6: |
| requirements.strength = 8; |
| break; |
| default: |
| WARN(1, "Could not get ECC info"); |
| requirements.step_size = 0; |
| break; |
| } |
| } |
| |
| nanddev_set_ecc_requirements(base, &requirements); |
| } |
| |
| static int |
| tc58teg5dclta00_choose_interface_config(struct nand_chip *chip, |
| struct nand_interface_config *iface) |
| { |
| onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 5); |
| |
| return nand_choose_best_sdr_timings(chip, iface, NULL); |
| } |
| |
| static int |
| tc58nvg0s3e_choose_interface_config(struct nand_chip *chip, |
| struct nand_interface_config *iface) |
| { |
| onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 2); |
| |
| return nand_choose_best_sdr_timings(chip, iface, NULL); |
| } |
| |
| static int |
| th58nvg2s3hbai4_choose_interface_config(struct nand_chip *chip, |
| struct nand_interface_config *iface) |
| { |
| struct nand_sdr_timings *sdr = &iface->timings.sdr; |
| |
| /* Start with timings from the closest timing mode, mode 4. */ |
| onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4); |
| |
| /* Patch timings that differ from mode 4. */ |
| sdr->tALS_min = 12000; |
| sdr->tCHZ_max = 20000; |
| sdr->tCLS_min = 12000; |
| sdr->tCOH_min = 0; |
| sdr->tDS_min = 12000; |
| sdr->tRHOH_min = 25000; |
| sdr->tRHW_min = 30000; |
| sdr->tRHZ_max = 60000; |
| sdr->tWHR_min = 60000; |
| |
| /* Patch timings not part of onfi timing mode. */ |
| sdr->tPROG_max = 700000000; |
| sdr->tBERS_max = 5000000000; |
| |
| return nand_choose_best_sdr_timings(chip, iface, sdr); |
| } |
| |
| static int tc58teg5dclta00_init(struct nand_chip *chip) |
| { |
| struct mtd_info *mtd = nand_to_mtd(chip); |
| |
| chip->ops.choose_interface_config = |
| &tc58teg5dclta00_choose_interface_config; |
| chip->options |= NAND_NEED_SCRAMBLING; |
| mtd_set_pairing_scheme(mtd, &dist3_pairing_scheme); |
| |
| return 0; |
| } |
| |
| static int tc58nvg0s3e_init(struct nand_chip *chip) |
| { |
| chip->ops.choose_interface_config = |
| &tc58nvg0s3e_choose_interface_config; |
| |
| return 0; |
| } |
| |
| static int th58nvg2s3hbai4_init(struct nand_chip *chip) |
| { |
| chip->ops.choose_interface_config = |
| &th58nvg2s3hbai4_choose_interface_config; |
| |
| return 0; |
| } |
| |
| static int toshiba_nand_init(struct nand_chip *chip) |
| { |
| if (nand_is_slc(chip)) |
| chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE; |
| |
| /* Check that chip is BENAND and ECC mode is on-die */ |
| if (nand_is_slc(chip) && |
| chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE && |
| chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND) |
| toshiba_nand_benand_init(chip); |
| |
| if (!strcmp("TC58TEG5DCLTA00", chip->parameters.model)) |
| tc58teg5dclta00_init(chip); |
| if (!strncmp("TC58NVG0S3E", chip->parameters.model, |
| sizeof("TC58NVG0S3E") - 1)) |
| tc58nvg0s3e_init(chip); |
| if (!strncmp("TH58NVG2S3HBAI4", chip->parameters.model, |
| sizeof("TH58NVG2S3HBAI4") - 1)) |
| th58nvg2s3hbai4_init(chip); |
| |
| return 0; |
| } |
| |
| const struct nand_manufacturer_ops toshiba_nand_manuf_ops = { |
| .detect = toshiba_nand_decode_id, |
| .init = toshiba_nand_init, |
| }; |