drivers/mtd/spi-nor/micron-st.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005, Intec Automation Inc.
  * Copyright (C) 2014, Freescale Semiconductor, Inc.
  */

 #include <linux/mtd/spi-nor.h>

 #include "core.h"

 #define SPINOR_OP_MT_DTR_RD	0xfd	/* Fast Read opcode in DTR mode */
 #define SPINOR_OP_MT_RD_ANY_REG	0x85	/* Read volatile register */
 #define SPINOR_OP_MT_WR_ANY_REG	0x81	/* Write volatile register */
 #define SPINOR_REG_MT_CFR0V	0x00	/* For setting octal DTR mode */
 #define SPINOR_REG_MT_CFR1V	0x01	/* For setting dummy cycles */
 #define SPINOR_MT_OCT_DTR	0xe7	/* Enable Octal DTR. */
 #define SPINOR_MT_EXSPI		0xff	/* Enable Extended SPI (default) */

 static int spi_nor_micron_octal_dtr_enable(struct spi_nor *nor, bool enable)
 {
 	struct spi_mem_op op;
 	u8 *buf = nor->bouncebuf;
 	int ret;

 	if (enable) {
 		/* Use 20 dummy cycles for memory array reads. */
 		ret = spi_nor_write_enable(nor);
 		if (ret)
 			return ret;

 		*buf = 20;
 		op = (struct spi_mem_op)
 			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 1),
 				   SPI_MEM_OP_ADDR(3, SPINOR_REG_MT_CFR1V, 1),
 				   SPI_MEM_OP_NO_DUMMY,
 				   SPI_MEM_OP_DATA_OUT(1, buf, 1));

 		ret = spi_mem_exec_op(nor->spimem, &op);
 		if (ret)
 			return ret;

 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
 			return ret;
 	}

 	ret = spi_nor_write_enable(nor);
 	if (ret)
 		return ret;

 	if (enable)
 		*buf = SPINOR_MT_OCT_DTR;
 	else
 		*buf = SPINOR_MT_EXSPI;

 	op = (struct spi_mem_op)
 		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 1),
 			   SPI_MEM_OP_ADDR(enable ? 3 : 4,
 					   SPINOR_REG_MT_CFR0V, 1),
 			   SPI_MEM_OP_NO_DUMMY,
 			   SPI_MEM_OP_DATA_OUT(1, buf, 1));

 	if (!enable)
 		spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);

 	ret = spi_mem_exec_op(nor->spimem, &op);
 	if (ret)
 		return ret;

 	/* Read flash ID to make sure the switch was successful. */
 	op = (struct spi_mem_op)
 		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
 			   SPI_MEM_OP_NO_ADDR,
 			   SPI_MEM_OP_DUMMY(enable ? 8 : 0, 1),
 			   SPI_MEM_OP_DATA_IN(round_up(nor->info->id_len, 2),
 					      buf, 1));

 	if (enable)
 		spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);

 	ret = spi_mem_exec_op(nor->spimem, &op);
 	if (ret)
 		return ret;

 	if (memcmp(buf, nor->info->id, nor->info->id_len))
 		return -EINVAL;

 	return 0;
 }

 static void mt35xu512aba_default_init(struct spi_nor *nor)
 {
 	nor->params->octal_dtr_enable = spi_nor_micron_octal_dtr_enable;
 }

 static void mt35xu512aba_post_sfdp_fixup(struct spi_nor *nor)
 {
 	/* Set the Fast Read settings. */
 	nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
 	spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR],
 				  0, 20, SPINOR_OP_MT_DTR_RD,
 				  SNOR_PROTO_8_8_8_DTR);

 	nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
 	nor->params->rdsr_dummy = 8;
 	nor->params->rdsr_addr_nbytes = 0;

 	/*
 	 * The BFPT quad enable field is set to a reserved value so the quad
 	 * enable function is ignored by spi_nor_parse_bfpt(). Make sure we
 	 * disable it.
 	 */
 	nor->params->quad_enable = NULL;
 }

 static struct spi_nor_fixups mt35xu512aba_fixups = {
 	.default_init = mt35xu512aba_default_init,
 	.post_sfdp = mt35xu512aba_post_sfdp_fixup,
 };

 static const struct flash_info micron_parts[] = {
 	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
 			       SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
 			       SPI_NOR_4B_OPCODES | SPI_NOR_OCTAL_DTR_READ |
 			       SPI_NOR_OCTAL_DTR_PP |
 			       SPI_NOR_IO_MODE_EN_VOLATILE)
 	  .fixups = &mt35xu512aba_fixups},
 	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
 			    SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
 			    SPI_NOR_4B_OPCODES) },
 };

 static const struct flash_info st_parts[] = {
 	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32,
 			      SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64,
 			      SPI_NOR_QUAD_READ) },
 	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64,
 			      SPI_NOR_QUAD_READ) },
 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128,
 			      SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128,
 			      SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
 			      USE_FSR | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
 	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
 			      NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      NO_CHIP_ERASE) },
 	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      NO_CHIP_ERASE) },
 	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096,
 			      SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },

 	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
 	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
 	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
 	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
 	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
 	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
 	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
 	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
 	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },

 	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
 	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
 	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
 	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
 	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
 	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
 	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
 	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
 	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },

 	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
 	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
 	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },

 	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
 	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
 	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },

 	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
 	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
 	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
 	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
 	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
 	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
 };

 /**
  * st_micron_set_4byte_addr_mode() - Set 4-byte address mode for ST and Micron
  * flashes.
  * @nor:	pointer to 'struct spi_nor'.
  * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
  *		address mode.
  *
  * Return: 0 on success, -errno otherwise.
  */
 static int st_micron_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 {
 	int ret;

 	ret = spi_nor_write_enable(nor);
 	if (ret)
 		return ret;

 	ret = spi_nor_set_4byte_addr_mode(nor, enable);
 	if (ret)
 		return ret;

 	return spi_nor_write_disable(nor);
 }

 static void micron_st_default_init(struct spi_nor *nor)
 {
 	nor->flags |= SNOR_F_HAS_LOCK;
 	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
 	nor->params->quad_enable = NULL;
 	nor->params->set_4byte_addr_mode = st_micron_set_4byte_addr_mode;
 }

 static const struct spi_nor_fixups micron_st_fixups = {
 	.default_init = micron_st_default_init,
 };

 const struct spi_nor_manufacturer spi_nor_micron = {
 	.name = "micron",
 	.parts = micron_parts,
 	.nparts = ARRAY_SIZE(micron_parts),
 	.fixups = &micron_st_fixups,
 };

 const struct spi_nor_manufacturer spi_nor_st = {
 	.name = "st",
 	.parts = st_parts,
 	.nparts = ARRAY_SIZE(st_parts),
 	.fixups = &micron_st_fixups,
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (C) 2005, Intec Automation Inc.
	* Copyright (C) 2014, Freescale Semiconductor, Inc.
	*/

	#include <linux/mtd/spi-nor.h>

	#include "core.h"

	#define SPINOR_OP_MT_DTR_RD 0xfd /* Fast Read opcode in DTR mode */
	#define SPINOR_OP_MT_RD_ANY_REG 0x85 /* Read volatile register */
	#define SPINOR_OP_MT_WR_ANY_REG 0x81 /* Write volatile register */
	#define SPINOR_REG_MT_CFR0V 0x00 /* For setting octal DTR mode */
	#define SPINOR_REG_MT_CFR1V 0x01 /* For setting dummy cycles */
	#define SPINOR_MT_OCT_DTR 0xe7 /* Enable Octal DTR. */
	#define SPINOR_MT_EXSPI 0xff /* Enable Extended SPI (default) */

	static int spi_nor_micron_octal_dtr_enable(struct spi_nor *nor, bool enable)
	{
	struct spi_mem_op op;
	u8 *buf = nor->bouncebuf;
	int ret;

	if (enable) {
	/* Use 20 dummy cycles for memory array reads. */
	ret = spi_nor_write_enable(nor);
	if (ret)
	return ret;

	*buf = 20;
	op = (struct spi_mem_op)
	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 1),
	SPI_MEM_OP_ADDR(3, SPINOR_REG_MT_CFR1V, 1),
	SPI_MEM_OP_NO_DUMMY,
	SPI_MEM_OP_DATA_OUT(1, buf, 1));

	ret = spi_mem_exec_op(nor->spimem, &op);
	if (ret)
	return ret;

	ret = spi_nor_wait_till_ready(nor);
	if (ret)
	return ret;
	}

	ret = spi_nor_write_enable(nor);
	if (ret)
	return ret;

	if (enable)
	*buf = SPINOR_MT_OCT_DTR;
	else
	*buf = SPINOR_MT_EXSPI;

	op = (struct spi_mem_op)
	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 1),
	SPI_MEM_OP_ADDR(enable ? 3 : 4,
	SPINOR_REG_MT_CFR0V, 1),
	SPI_MEM_OP_NO_DUMMY,
	SPI_MEM_OP_DATA_OUT(1, buf, 1));

	if (!enable)
	spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);

	ret = spi_mem_exec_op(nor->spimem, &op);
	if (ret)
	return ret;

	/* Read flash ID to make sure the switch was successful. */
	op = (struct spi_mem_op)
	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
	SPI_MEM_OP_NO_ADDR,
	SPI_MEM_OP_DUMMY(enable ? 8 : 0, 1),
	SPI_MEM_OP_DATA_IN(round_up(nor->info->id_len, 2),
	buf, 1));

	if (enable)
	spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);

	ret = spi_mem_exec_op(nor->spimem, &op);
	if (ret)
	return ret;

	if (memcmp(buf, nor->info->id, nor->info->id_len))
	return -EINVAL;

	return 0;
	}

	static void mt35xu512aba_default_init(struct spi_nor *nor)
	{
	nor->params->octal_dtr_enable = spi_nor_micron_octal_dtr_enable;
	}

	static void mt35xu512aba_post_sfdp_fixup(struct spi_nor *nor)
	{
	/* Set the Fast Read settings. */
	nor->params->hwcaps.mask \|= SNOR_HWCAPS_READ_8_8_8_DTR;
	spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR],
	0, 20, SPINOR_OP_MT_DTR_RD,
	SNOR_PROTO_8_8_8_DTR);

	nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
	nor->params->rdsr_dummy = 8;
	nor->params->rdsr_addr_nbytes = 0;

	/*
	* The BFPT quad enable field is set to a reserved value so the quad
	* enable function is ignored by spi_nor_parse_bfpt(). Make sure we
	* disable it.
	*/
	nor->params->quad_enable = NULL;
	}

	static struct spi_nor_fixups mt35xu512aba_fixups = {
	.default_init = mt35xu512aba_default_init,
	.post_sfdp = mt35xu512aba_post_sfdp_fixup,
	};

	static const struct flash_info micron_parts[] = {
	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
	SECT_4K \| USE_FSR \| SPI_NOR_OCTAL_READ \|
	SPI_NOR_4B_OPCODES \| SPI_NOR_OCTAL_DTR_READ \|
	SPI_NOR_OCTAL_DTR_PP \|
	SPI_NOR_IO_MODE_EN_VOLATILE)
	.fixups = &mt35xu512aba_fixups},
	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
	SECT_4K \| USE_FSR \| SPI_NOR_OCTAL_READ \|
	SPI_NOR_4B_OPCODES) },
	};

	static const struct flash_info st_parts[] = {
	{ "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32,
	SECT_4K \| SPI_NOR_QUAD_READ) },
	{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64,
	SPI_NOR_QUAD_READ) },
	{ "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64,
	SPI_NOR_QUAD_READ) },
	{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128,
	SECT_4K \| SPI_NOR_QUAD_READ) },
	{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128,
	SECT_4K \| SPI_NOR_QUAD_READ) },
	{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB \|
	SPI_NOR_4BIT_BP \| SPI_NOR_BP3_SR_BIT6) },
	{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB \|
	SPI_NOR_4BIT_BP \| SPI_NOR_BP3_SR_BIT6) },
	{ "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
	SECT_4K \| USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ \| SPI_NOR_4B_OPCODES) },
	{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K \|
	USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ) },
	{ "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512,
	SECT_4K \| USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ \| SPI_NOR_4B_OPCODES) },
	{ "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ) },
	{ "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
	SECT_4K \| USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ \| SPI_NOR_4B_OPCODES) },
	{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB \|
	SPI_NOR_4BIT_BP \| SPI_NOR_BP3_SR_BIT6) },
	{ "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
	SECT_4K \| USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ \| SPI_NOR_4B_OPCODES) },
	{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB \|
	SPI_NOR_4BIT_BP \| SPI_NOR_BP3_SR_BIT6) },
	{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB \|
	SPI_NOR_4BIT_BP \| SPI_NOR_BP3_SR_BIT6 \|
	NO_CHIP_ERASE) },
	{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	NO_CHIP_ERASE) },
	{ "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
	SECT_4K \| USE_FSR \| SPI_NOR_QUAD_READ \|
	NO_CHIP_ERASE) },
	{ "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096,
	SECT_4K \| USE_FSR \| SPI_NOR_DUAL_READ \|
	SPI_NOR_QUAD_READ \| NO_CHIP_ERASE) },

	{ "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
	{ "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
	{ "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
	{ "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
	{ "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
	{ "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
	{ "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
	{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
	{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },

	{ "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
	{ "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
	{ "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
	{ "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
	{ "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
	{ "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
	{ "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
	{ "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },

	{ "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
	{ "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
	{ "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },

	{ "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
	{ "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
	{ "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },

	{ "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
	{ "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
	{ "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
	{ "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
	{ "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
	{ "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
	};

	/**
	* st_micron_set_4byte_addr_mode() - Set 4-byte address mode for ST and Micron
	* flashes.
	* @nor: pointer to 'struct spi_nor'.
	* @enable: true to enter the 4-byte address mode, false to exit the 4-byte
	* address mode.
	*
	* Return: 0 on success, -errno otherwise.
	*/
	static int st_micron_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
	{
	int ret;

	ret = spi_nor_write_enable(nor);
	if (ret)
	return ret;

	ret = spi_nor_set_4byte_addr_mode(nor, enable);
	if (ret)
	return ret;

	return spi_nor_write_disable(nor);
	}

	static void micron_st_default_init(struct spi_nor *nor)
	{
	nor->flags \|= SNOR_F_HAS_LOCK;
	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
	nor->params->quad_enable = NULL;
	nor->params->set_4byte_addr_mode = st_micron_set_4byte_addr_mode;
	}

	static const struct spi_nor_fixups micron_st_fixups = {
	.default_init = micron_st_default_init,
	};

	const struct spi_nor_manufacturer spi_nor_micron = {
	.name = "micron",
	.parts = micron_parts,
	.nparts = ARRAY_SIZE(micron_parts),
	.fixups = &micron_st_fixups,
	};

	const struct spi_nor_manufacturer spi_nor_st = {
	.name = "st",
	.parts = st_parts,
	.nparts = ARRAY_SIZE(st_parts),
	.fixups = &micron_st_fixups,
	};