blob: bf8894a0257e9d051b605c3b015f453f5280f37b [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence MACB/GEM Ethernet controller
maintainers:
- Nicolas Ferre <nicolas.ferre@microchip.com>
- Claudiu Beznea <claudiu.beznea@microchip.com>
properties:
compatible:
oneOf:
- items:
- enum:
- cdns,at91rm9200-emac # Atmel at91rm9200 SoC
- const: cdns,emac # Generic
- items:
- enum:
- cdns,zynq-gem # Xilinx Zynq-7xxx SoC
- cdns,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC
- const: cdns,gem # Generic
deprecated: true
- items:
- enum:
- xlnx,versal-gem # Xilinx Versal
- xlnx,zynq-gem # Xilinx Zynq-7xxx SoC
- xlnx,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC
- const: cdns,gem # Generic
- items:
- enum:
- cdns,at91sam9260-macb # Atmel at91sam9 SoCs
- cdns,sam9x60-macb # Microchip sam9x60 SoC
- microchip,mpfs-macb # Microchip PolarFire SoC
- const: cdns,macb # Generic
- items:
- enum:
- atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs
- enum:
- cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
- const: cdns,macb # Generic
- enum:
- atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs
- atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs
- atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs
- atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs
- cdns,np4-macb # NP4 SoC devices
- microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface
- microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
- sifive,fu540-c000-gem # SiFive FU540-C000 SoC
- cdns,emac # Generic
- cdns,gem # Generic
- cdns,macb # Generic
reg:
minItems: 1
items:
- description: Basic register set
- description: GEMGXL Management block registers on SiFive FU540-C000 SoC
interrupts:
minItems: 1
maxItems: 8
description: One interrupt per available hardware queue
clocks:
minItems: 1
maxItems: 5
clock-names:
minItems: 1
items:
- enum: [ ether_clk, hclk, pclk ]
- enum: [ hclk, pclk ]
- const: tx_clk
- enum: [ rx_clk, tsu_clk ]
- const: tsu_clk
local-mac-address: true
phy-mode: true
phy-handle: true
phys:
maxItems: 1
resets:
maxItems: 1
description:
Recommended with ZynqMP, specify reset control for this
controller instance with zynqmp-reset driver.
reset-names:
maxItems: 1
fixed-link: true
iommus:
maxItems: 1
power-domains:
maxItems: 1
cdns,rx-watermark:
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the receive partial store and forward mode is activated,
the receiver will only begin to forward the packet to the external
AHB or AXI slave when enough packet data is stored in the SRAM packet buffer.
rx-watermark corresponds to the number of SRAM buffer locations,
that need to be filled, before the forwarding process is activated.
Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
'#address-cells':
const: 1
'#size-cells':
const: 0
mdio:
type: object
description:
Node containing PHY children. If this node is not present, then PHYs will
be direct children.
patternProperties:
"^ethernet-phy@[0-9a-f]$":
type: object
$ref: ethernet-phy.yaml#
properties:
reset-gpios: true
magic-packet:
type: boolean
description:
Indicates that the hardware supports waking up via magic packet.
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- phy-mode
allOf:
- $ref: ethernet-controller.yaml#
- if:
not:
properties:
compatible:
contains:
const: sifive,fu540-c000-gem
then:
properties:
reg:
maxItems: 1
unevaluatedProperties: false
examples:
- |
macb0: ethernet@fffc4000 {
compatible = "cdns,macb";
reg = <0xfffc4000 0x4000>;
interrupts = <21>;
cdns,rx-watermark = <0x44>;
phy-mode = "rmii";
local-mac-address = [3a 0e 03 04 05 06];
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@1 {
reg = <0x1>;
reset-gpios = <&pioE 6 1>;
};
};
- |
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
#include <dt-bindings/phy/phy.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
gem1: ethernet@ff0c0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
<&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
<&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
reset-names = "gem1_rst";
phy-mode = "sgmii";
phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};