| /* |
| * linux/arch/arm/plat-omap/dma.c |
| * |
| * Copyright (C) 2003 - 2008 Nokia Corporation |
| * Author: Juha Yrjölä <juha.yrjola@nokia.com> |
| * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> |
| * Graphics DMA and LCD DMA graphics tranformations |
| * by Imre Deak <imre.deak@nokia.com> |
| * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. |
| * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> |
| * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. |
| * |
| * Copyright (C) 2009 Texas Instruments |
| * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * |
| * Support functions for the OMAP internal DMA channels. |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ |
| * Converted DMA library into DMA platform driver. |
| * - G, Manjunath Kondaiah <manjugk@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| #include <linux/omap-dma.h> |
| |
| /* |
| * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA |
| * channels that an instance of the SDMA IP block can support. Used |
| * to size arrays. (The actual maximum on a particular SoC may be less |
| * than this -- for example, OMAP1 SDMA instances only support 17 logical |
| * DMA channels.) |
| */ |
| #define MAX_LOGICAL_DMA_CH_COUNT 32 |
| |
| #undef DEBUG |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, |
| DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED |
| }; |
| |
| enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; |
| #endif |
| |
| #define OMAP_DMA_ACTIVE 0x01 |
| #define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff |
| |
| #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) |
| |
| static struct omap_system_dma_plat_info *p; |
| static struct omap_dma_dev_attr *d; |
| |
| static int enable_1510_mode; |
| static u32 errata; |
| |
| static struct omap_dma_global_context_registers { |
| u32 dma_irqenable_l0; |
| u32 dma_ocp_sysconfig; |
| u32 dma_gcr; |
| } omap_dma_global_context; |
| |
| struct dma_link_info { |
| int *linked_dmach_q; |
| int no_of_lchs_linked; |
| |
| int q_count; |
| int q_tail; |
| int q_head; |
| |
| int chain_state; |
| int chain_mode; |
| |
| }; |
| |
| static struct dma_link_info *dma_linked_lch; |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| |
| /* Chain handling macros */ |
| #define OMAP_DMA_CHAIN_QINIT(chain_id) \ |
| do { \ |
| dma_linked_lch[chain_id].q_head = \ |
| dma_linked_lch[chain_id].q_tail = \ |
| dma_linked_lch[chain_id].q_count = 0; \ |
| } while (0) |
| #define OMAP_DMA_CHAIN_QFULL(chain_id) \ |
| (dma_linked_lch[chain_id].no_of_lchs_linked == \ |
| dma_linked_lch[chain_id].q_count) |
| #define OMAP_DMA_CHAIN_QLAST(chain_id) \ |
| do { \ |
| ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \ |
| dma_linked_lch[chain_id].q_count) \ |
| } while (0) |
| #define OMAP_DMA_CHAIN_QEMPTY(chain_id) \ |
| (0 == dma_linked_lch[chain_id].q_count) |
| #define __OMAP_DMA_CHAIN_INCQ(end) \ |
| ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked) |
| #define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \ |
| do { \ |
| __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \ |
| dma_linked_lch[chain_id].q_count--; \ |
| } while (0) |
| |
| #define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \ |
| do { \ |
| __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \ |
| dma_linked_lch[chain_id].q_count++; \ |
| } while (0) |
| #endif |
| |
| static int dma_lch_count; |
| static int dma_chan_count; |
| static int omap_dma_reserve_channels; |
| |
| static spinlock_t dma_chan_lock; |
| static struct omap_dma_lch *dma_chan; |
| |
| static inline void disable_lnk(int lch); |
| static void omap_disable_channel_irq(int lch); |
| static inline void omap_enable_channel_irq(int lch); |
| |
| #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ |
| __func__); |
| |
| #ifdef CONFIG_ARCH_OMAP15XX |
| /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ |
| static int omap_dma_in_1510_mode(void) |
| { |
| return enable_1510_mode; |
| } |
| #else |
| #define omap_dma_in_1510_mode() 0 |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| static inline int get_gdma_dev(int req) |
| { |
| u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; |
| int shift = ((req - 1) % 5) * 6; |
| |
| return ((omap_readl(reg) >> shift) & 0x3f) + 1; |
| } |
| |
| static inline void set_gdma_dev(int req, int dev) |
| { |
| u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; |
| int shift = ((req - 1) % 5) * 6; |
| u32 l; |
| |
| l = omap_readl(reg); |
| l &= ~(0x3f << shift); |
| l |= (dev - 1) << shift; |
| omap_writel(l, reg); |
| } |
| #else |
| #define set_gdma_dev(req, dev) do {} while (0) |
| #define omap_readl(reg) 0 |
| #define omap_writel(val, reg) do {} while (0) |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| void omap_set_dma_priority(int lch, int dst_port, int priority) |
| { |
| unsigned long reg; |
| u32 l; |
| |
| if (dma_omap1()) { |
| switch (dst_port) { |
| case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ |
| reg = OMAP_TC_OCPT1_PRIOR; |
| break; |
| case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ |
| reg = OMAP_TC_OCPT2_PRIOR; |
| break; |
| case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ |
| reg = OMAP_TC_EMIFF_PRIOR; |
| break; |
| case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ |
| reg = OMAP_TC_EMIFS_PRIOR; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| l = omap_readl(reg); |
| l &= ~(0xf << 8); |
| l |= (priority & 0xf) << 8; |
| omap_writel(l, reg); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP2PLUS |
| void omap_set_dma_priority(int lch, int dst_port, int priority) |
| { |
| u32 ccr; |
| |
| ccr = p->dma_read(CCR, lch); |
| if (priority) |
| ccr |= (1 << 6); |
| else |
| ccr &= ~(1 << 6); |
| p->dma_write(ccr, CCR, lch); |
| } |
| #endif |
| EXPORT_SYMBOL(omap_set_dma_priority); |
| |
| void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, |
| int frame_count, int sync_mode, |
| int dma_trigger, int src_or_dst_synch) |
| { |
| u32 l; |
| |
| l = p->dma_read(CSDP, lch); |
| l &= ~0x03; |
| l |= data_type; |
| p->dma_write(l, CSDP, lch); |
| |
| if (dma_omap1()) { |
| u16 ccr; |
| |
| ccr = p->dma_read(CCR, lch); |
| ccr &= ~(1 << 5); |
| if (sync_mode == OMAP_DMA_SYNC_FRAME) |
| ccr |= 1 << 5; |
| p->dma_write(ccr, CCR, lch); |
| |
| ccr = p->dma_read(CCR2, lch); |
| ccr &= ~(1 << 2); |
| if (sync_mode == OMAP_DMA_SYNC_BLOCK) |
| ccr |= 1 << 2; |
| p->dma_write(ccr, CCR2, lch); |
| } |
| |
| if (dma_omap2plus() && dma_trigger) { |
| u32 val; |
| |
| val = p->dma_read(CCR, lch); |
| |
| /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ |
| val &= ~((1 << 23) | (3 << 19) | 0x1f); |
| val |= (dma_trigger & ~0x1f) << 14; |
| val |= dma_trigger & 0x1f; |
| |
| if (sync_mode & OMAP_DMA_SYNC_FRAME) |
| val |= 1 << 5; |
| else |
| val &= ~(1 << 5); |
| |
| if (sync_mode & OMAP_DMA_SYNC_BLOCK) |
| val |= 1 << 18; |
| else |
| val &= ~(1 << 18); |
| |
| if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) { |
| val &= ~(1 << 24); /* dest synch */ |
| val |= (1 << 23); /* Prefetch */ |
| } else if (src_or_dst_synch) { |
| val |= 1 << 24; /* source synch */ |
| } else { |
| val &= ~(1 << 24); /* dest synch */ |
| } |
| p->dma_write(val, CCR, lch); |
| } |
| |
| p->dma_write(elem_count, CEN, lch); |
| p->dma_write(frame_count, CFN, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_transfer_params); |
| |
| void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) |
| { |
| BUG_ON(omap_dma_in_1510_mode()); |
| |
| if (dma_omap1()) { |
| u16 w; |
| |
| w = p->dma_read(CCR2, lch); |
| w &= ~0x03; |
| |
| switch (mode) { |
| case OMAP_DMA_CONSTANT_FILL: |
| w |= 0x01; |
| break; |
| case OMAP_DMA_TRANSPARENT_COPY: |
| w |= 0x02; |
| break; |
| case OMAP_DMA_COLOR_DIS: |
| break; |
| default: |
| BUG(); |
| } |
| p->dma_write(w, CCR2, lch); |
| |
| w = p->dma_read(LCH_CTRL, lch); |
| w &= ~0x0f; |
| /* Default is channel type 2D */ |
| if (mode) { |
| p->dma_write(color, COLOR, lch); |
| w |= 1; /* Channel type G */ |
| } |
| p->dma_write(w, LCH_CTRL, lch); |
| } |
| |
| if (dma_omap2plus()) { |
| u32 val; |
| |
| val = p->dma_read(CCR, lch); |
| val &= ~((1 << 17) | (1 << 16)); |
| |
| switch (mode) { |
| case OMAP_DMA_CONSTANT_FILL: |
| val |= 1 << 16; |
| break; |
| case OMAP_DMA_TRANSPARENT_COPY: |
| val |= 1 << 17; |
| break; |
| case OMAP_DMA_COLOR_DIS: |
| break; |
| default: |
| BUG(); |
| } |
| p->dma_write(val, CCR, lch); |
| |
| color &= 0xffffff; |
| p->dma_write(color, COLOR, lch); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_color_mode); |
| |
| void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) |
| { |
| if (dma_omap2plus()) { |
| u32 csdp; |
| |
| csdp = p->dma_read(CSDP, lch); |
| csdp &= ~(0x3 << 16); |
| csdp |= (mode << 16); |
| p->dma_write(csdp, CSDP, lch); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_write_mode); |
| |
| void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) |
| { |
| if (dma_omap1() && !dma_omap15xx()) { |
| u32 l; |
| |
| l = p->dma_read(LCH_CTRL, lch); |
| l &= ~0x7; |
| l |= mode; |
| p->dma_write(l, LCH_CTRL, lch); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_channel_mode); |
| |
| /* Note that src_port is only for omap1 */ |
| void omap_set_dma_src_params(int lch, int src_port, int src_amode, |
| unsigned long src_start, |
| int src_ei, int src_fi) |
| { |
| u32 l; |
| |
| if (dma_omap1()) { |
| u16 w; |
| |
| w = p->dma_read(CSDP, lch); |
| w &= ~(0x1f << 2); |
| w |= src_port << 2; |
| p->dma_write(w, CSDP, lch); |
| } |
| |
| l = p->dma_read(CCR, lch); |
| l &= ~(0x03 << 12); |
| l |= src_amode << 12; |
| p->dma_write(l, CCR, lch); |
| |
| p->dma_write(src_start, CSSA, lch); |
| |
| p->dma_write(src_ei, CSEI, lch); |
| p->dma_write(src_fi, CSFI, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_params); |
| |
| void omap_set_dma_params(int lch, struct omap_dma_channel_params *params) |
| { |
| omap_set_dma_transfer_params(lch, params->data_type, |
| params->elem_count, params->frame_count, |
| params->sync_mode, params->trigger, |
| params->src_or_dst_synch); |
| omap_set_dma_src_params(lch, params->src_port, |
| params->src_amode, params->src_start, |
| params->src_ei, params->src_fi); |
| |
| omap_set_dma_dest_params(lch, params->dst_port, |
| params->dst_amode, params->dst_start, |
| params->dst_ei, params->dst_fi); |
| if (params->read_prio || params->write_prio) |
| omap_dma_set_prio_lch(lch, params->read_prio, |
| params->write_prio); |
| } |
| EXPORT_SYMBOL(omap_set_dma_params); |
| |
| void omap_set_dma_src_index(int lch, int eidx, int fidx) |
| { |
| if (dma_omap2plus()) |
| return; |
| |
| p->dma_write(eidx, CSEI, lch); |
| p->dma_write(fidx, CSFI, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_index); |
| |
| void omap_set_dma_src_data_pack(int lch, int enable) |
| { |
| u32 l; |
| |
| l = p->dma_read(CSDP, lch); |
| l &= ~(1 << 6); |
| if (enable) |
| l |= (1 << 6); |
| p->dma_write(l, CSDP, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_data_pack); |
| |
| void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) |
| { |
| unsigned int burst = 0; |
| u32 l; |
| |
| l = p->dma_read(CSDP, lch); |
| l &= ~(0x03 << 7); |
| |
| switch (burst_mode) { |
| case OMAP_DMA_DATA_BURST_DIS: |
| break; |
| case OMAP_DMA_DATA_BURST_4: |
| if (dma_omap2plus()) |
| burst = 0x1; |
| else |
| burst = 0x2; |
| break; |
| case OMAP_DMA_DATA_BURST_8: |
| if (dma_omap2plus()) { |
| burst = 0x2; |
| break; |
| } |
| /* |
| * not supported by current hardware on OMAP1 |
| * w |= (0x03 << 7); |
| * fall through |
| */ |
| case OMAP_DMA_DATA_BURST_16: |
| if (dma_omap2plus()) { |
| burst = 0x3; |
| break; |
| } |
| /* |
| * OMAP1 don't support burst 16 |
| * fall through |
| */ |
| default: |
| BUG(); |
| } |
| |
| l |= (burst << 7); |
| p->dma_write(l, CSDP, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_burst_mode); |
| |
| /* Note that dest_port is only for OMAP1 */ |
| void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, |
| unsigned long dest_start, |
| int dst_ei, int dst_fi) |
| { |
| u32 l; |
| |
| if (dma_omap1()) { |
| l = p->dma_read(CSDP, lch); |
| l &= ~(0x1f << 9); |
| l |= dest_port << 9; |
| p->dma_write(l, CSDP, lch); |
| } |
| |
| l = p->dma_read(CCR, lch); |
| l &= ~(0x03 << 14); |
| l |= dest_amode << 14; |
| p->dma_write(l, CCR, lch); |
| |
| p->dma_write(dest_start, CDSA, lch); |
| |
| p->dma_write(dst_ei, CDEI, lch); |
| p->dma_write(dst_fi, CDFI, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_params); |
| |
| void omap_set_dma_dest_index(int lch, int eidx, int fidx) |
| { |
| if (dma_omap2plus()) |
| return; |
| |
| p->dma_write(eidx, CDEI, lch); |
| p->dma_write(fidx, CDFI, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_index); |
| |
| void omap_set_dma_dest_data_pack(int lch, int enable) |
| { |
| u32 l; |
| |
| l = p->dma_read(CSDP, lch); |
| l &= ~(1 << 13); |
| if (enable) |
| l |= 1 << 13; |
| p->dma_write(l, CSDP, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_data_pack); |
| |
| void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) |
| { |
| unsigned int burst = 0; |
| u32 l; |
| |
| l = p->dma_read(CSDP, lch); |
| l &= ~(0x03 << 14); |
| |
| switch (burst_mode) { |
| case OMAP_DMA_DATA_BURST_DIS: |
| break; |
| case OMAP_DMA_DATA_BURST_4: |
| if (dma_omap2plus()) |
| burst = 0x1; |
| else |
| burst = 0x2; |
| break; |
| case OMAP_DMA_DATA_BURST_8: |
| if (dma_omap2plus()) |
| burst = 0x2; |
| else |
| burst = 0x3; |
| break; |
| case OMAP_DMA_DATA_BURST_16: |
| if (dma_omap2plus()) { |
| burst = 0x3; |
| break; |
| } |
| /* |
| * OMAP1 don't support burst 16 |
| * fall through |
| */ |
| default: |
| printk(KERN_ERR "Invalid DMA burst mode\n"); |
| BUG(); |
| return; |
| } |
| l |= (burst << 14); |
| p->dma_write(l, CSDP, lch); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); |
| |
| static inline void omap_enable_channel_irq(int lch) |
| { |
| /* Clear CSR */ |
| if (dma_omap1()) |
| p->dma_read(CSR, lch); |
| else |
| p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); |
| |
| /* Enable some nice interrupts. */ |
| p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); |
| } |
| |
| static inline void omap_disable_channel_irq(int lch) |
| { |
| /* disable channel interrupts */ |
| p->dma_write(0, CICR, lch); |
| /* Clear CSR */ |
| if (dma_omap1()) |
| p->dma_read(CSR, lch); |
| else |
| p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); |
| } |
| |
| void omap_enable_dma_irq(int lch, u16 bits) |
| { |
| dma_chan[lch].enabled_irqs |= bits; |
| } |
| EXPORT_SYMBOL(omap_enable_dma_irq); |
| |
| void omap_disable_dma_irq(int lch, u16 bits) |
| { |
| dma_chan[lch].enabled_irqs &= ~bits; |
| } |
| EXPORT_SYMBOL(omap_disable_dma_irq); |
| |
| static inline void enable_lnk(int lch) |
| { |
| u32 l; |
| |
| l = p->dma_read(CLNK_CTRL, lch); |
| |
| if (dma_omap1()) |
| l &= ~(1 << 14); |
| |
| /* Set the ENABLE_LNK bits */ |
| if (dma_chan[lch].next_lch != -1) |
| l = dma_chan[lch].next_lch | (1 << 15); |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| if (dma_omap2plus()) |
| if (dma_chan[lch].next_linked_ch != -1) |
| l = dma_chan[lch].next_linked_ch | (1 << 15); |
| #endif |
| |
| p->dma_write(l, CLNK_CTRL, lch); |
| } |
| |
| static inline void disable_lnk(int lch) |
| { |
| u32 l; |
| |
| l = p->dma_read(CLNK_CTRL, lch); |
| |
| /* Disable interrupts */ |
| omap_disable_channel_irq(lch); |
| |
| if (dma_omap1()) { |
| /* Set the STOP_LNK bit */ |
| l |= 1 << 14; |
| } |
| |
| if (dma_omap2plus()) { |
| /* Clear the ENABLE_LNK bit */ |
| l &= ~(1 << 15); |
| } |
| |
| p->dma_write(l, CLNK_CTRL, lch); |
| dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| |
| static inline void omap2_enable_irq_lch(int lch) |
| { |
| u32 val; |
| unsigned long flags; |
| |
| if (dma_omap1()) |
| return; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| /* clear IRQ STATUS */ |
| p->dma_write(1 << lch, IRQSTATUS_L0, lch); |
| /* Enable interrupt */ |
| val = p->dma_read(IRQENABLE_L0, lch); |
| val |= 1 << lch; |
| p->dma_write(val, IRQENABLE_L0, lch); |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| } |
| |
| static inline void omap2_disable_irq_lch(int lch) |
| { |
| u32 val; |
| unsigned long flags; |
| |
| if (dma_omap1()) |
| return; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| /* Disable interrupt */ |
| val = p->dma_read(IRQENABLE_L0, lch); |
| val &= ~(1 << lch); |
| p->dma_write(val, IRQENABLE_L0, lch); |
| /* clear IRQ STATUS */ |
| p->dma_write(1 << lch, IRQSTATUS_L0, lch); |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| } |
| |
| int omap_request_dma(int dev_id, const char *dev_name, |
| void (*callback)(int lch, u16 ch_status, void *data), |
| void *data, int *dma_ch_out) |
| { |
| int ch, free_ch = -1; |
| unsigned long flags; |
| struct omap_dma_lch *chan; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| for (ch = 0; ch < dma_chan_count; ch++) { |
| if (free_ch == -1 && dma_chan[ch].dev_id == -1) { |
| free_ch = ch; |
| /* Exit after first free channel found */ |
| break; |
| } |
| } |
| if (free_ch == -1) { |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| return -EBUSY; |
| } |
| chan = dma_chan + free_ch; |
| chan->dev_id = dev_id; |
| |
| if (p->clear_lch_regs) |
| p->clear_lch_regs(free_ch); |
| |
| if (dma_omap2plus()) |
| omap_clear_dma(free_ch); |
| |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| |
| chan->dev_name = dev_name; |
| chan->callback = callback; |
| chan->data = data; |
| chan->flags = 0; |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| if (dma_omap2plus()) { |
| chan->chain_id = -1; |
| chan->next_linked_ch = -1; |
| } |
| #endif |
| |
| chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; |
| |
| if (dma_omap1()) |
| chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; |
| else if (dma_omap2plus()) |
| chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | |
| OMAP2_DMA_TRANS_ERR_IRQ; |
| |
| if (dma_omap16xx()) { |
| /* If the sync device is set, configure it dynamically. */ |
| if (dev_id != 0) { |
| set_gdma_dev(free_ch + 1, dev_id); |
| dev_id = free_ch + 1; |
| } |
| /* |
| * Disable the 1510 compatibility mode and set the sync device |
| * id. |
| */ |
| p->dma_write(dev_id | (1 << 10), CCR, free_ch); |
| } else if (dma_omap1()) { |
| p->dma_write(dev_id, CCR, free_ch); |
| } |
| |
| if (dma_omap2plus()) { |
| omap_enable_channel_irq(free_ch); |
| omap2_enable_irq_lch(free_ch); |
| } |
| |
| *dma_ch_out = free_ch; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_request_dma); |
| |
| void omap_free_dma(int lch) |
| { |
| unsigned long flags; |
| |
| if (dma_chan[lch].dev_id == -1) { |
| pr_err("omap_dma: trying to free unallocated DMA channel %d\n", |
| lch); |
| return; |
| } |
| |
| /* Disable interrupt for logical channel */ |
| if (dma_omap2plus()) |
| omap2_disable_irq_lch(lch); |
| |
| /* Disable all DMA interrupts for the channel. */ |
| omap_disable_channel_irq(lch); |
| |
| /* Make sure the DMA transfer is stopped. */ |
| p->dma_write(0, CCR, lch); |
| |
| /* Clear registers */ |
| if (dma_omap2plus()) |
| omap_clear_dma(lch); |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| dma_chan[lch].dev_id = -1; |
| dma_chan[lch].next_lch = -1; |
| dma_chan[lch].callback = NULL; |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| } |
| EXPORT_SYMBOL(omap_free_dma); |
| |
| /** |
| * @brief omap_dma_set_global_params : Set global priority settings for dma |
| * |
| * @param arb_rate |
| * @param max_fifo_depth |
| * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM |
| * DMA_THREAD_RESERVE_ONET |
| * DMA_THREAD_RESERVE_TWOT |
| * DMA_THREAD_RESERVE_THREET |
| */ |
| void |
| omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) |
| { |
| u32 reg; |
| |
| if (dma_omap1()) { |
| printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); |
| return; |
| } |
| |
| if (max_fifo_depth == 0) |
| max_fifo_depth = 1; |
| if (arb_rate == 0) |
| arb_rate = 1; |
| |
| reg = 0xff & max_fifo_depth; |
| reg |= (0x3 & tparams) << 12; |
| reg |= (arb_rate & 0xff) << 16; |
| |
| p->dma_write(reg, GCR, 0); |
| } |
| EXPORT_SYMBOL(omap_dma_set_global_params); |
| |
| /** |
| * @brief omap_dma_set_prio_lch : Set channel wise priority settings |
| * |
| * @param lch |
| * @param read_prio - Read priority |
| * @param write_prio - Write priority |
| * Both of the above can be set with one of the following values : |
| * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW |
| */ |
| int |
| omap_dma_set_prio_lch(int lch, unsigned char read_prio, |
| unsigned char write_prio) |
| { |
| u32 l; |
| |
| if (unlikely((lch < 0 || lch >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid channel id\n"); |
| return -EINVAL; |
| } |
| l = p->dma_read(CCR, lch); |
| l &= ~((1 << 6) | (1 << 26)); |
| if (d->dev_caps & IS_RW_PRIORITY) |
| l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); |
| else |
| l |= ((read_prio & 0x1) << 6); |
| |
| p->dma_write(l, CCR, lch); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dma_set_prio_lch); |
| |
| /* |
| * Clears any DMA state so the DMA engine is ready to restart with new buffers |
| * through omap_start_dma(). Any buffers in flight are discarded. |
| */ |
| void omap_clear_dma(int lch) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| p->clear_dma(lch); |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(omap_clear_dma); |
| |
| void omap_start_dma(int lch) |
| { |
| u32 l; |
| |
| /* |
| * The CPC/CDAC register needs to be initialized to zero |
| * before starting dma transfer. |
| */ |
| if (dma_omap15xx()) |
| p->dma_write(0, CPC, lch); |
| else |
| p->dma_write(0, CDAC, lch); |
| |
| if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { |
| int next_lch, cur_lch; |
| char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; |
| |
| /* Set the link register of the first channel */ |
| enable_lnk(lch); |
| |
| memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); |
| dma_chan_link_map[lch] = 1; |
| |
| cur_lch = dma_chan[lch].next_lch; |
| do { |
| next_lch = dma_chan[cur_lch].next_lch; |
| |
| /* The loop case: we've been here already */ |
| if (dma_chan_link_map[cur_lch]) |
| break; |
| /* Mark the current channel */ |
| dma_chan_link_map[cur_lch] = 1; |
| |
| enable_lnk(cur_lch); |
| omap_enable_channel_irq(cur_lch); |
| |
| cur_lch = next_lch; |
| } while (next_lch != -1); |
| } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS)) |
| p->dma_write(lch, CLNK_CTRL, lch); |
| |
| omap_enable_channel_irq(lch); |
| |
| l = p->dma_read(CCR, lch); |
| |
| if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING)) |
| l |= OMAP_DMA_CCR_BUFFERING_DISABLE; |
| l |= OMAP_DMA_CCR_EN; |
| |
| /* |
| * As dma_write() uses IO accessors which are weakly ordered, there |
| * is no guarantee that data in coherent DMA memory will be visible |
| * to the DMA device. Add a memory barrier here to ensure that any |
| * such data is visible prior to enabling DMA. |
| */ |
| mb(); |
| p->dma_write(l, CCR, lch); |
| |
| dma_chan[lch].flags |= OMAP_DMA_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_start_dma); |
| |
| void omap_stop_dma(int lch) |
| { |
| u32 l; |
| |
| /* Disable all interrupts on the channel */ |
| omap_disable_channel_irq(lch); |
| |
| l = p->dma_read(CCR, lch); |
| if (IS_DMA_ERRATA(DMA_ERRATA_i541) && |
| (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) { |
| int i = 0; |
| u32 sys_cf; |
| |
| /* Configure No-Standby */ |
| l = p->dma_read(OCP_SYSCONFIG, lch); |
| sys_cf = l; |
| l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK; |
| l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE); |
| p->dma_write(l , OCP_SYSCONFIG, 0); |
| |
| l = p->dma_read(CCR, lch); |
| l &= ~OMAP_DMA_CCR_EN; |
| p->dma_write(l, CCR, lch); |
| |
| /* Wait for sDMA FIFO drain */ |
| l = p->dma_read(CCR, lch); |
| while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE | |
| OMAP_DMA_CCR_WR_ACTIVE))) { |
| udelay(5); |
| i++; |
| l = p->dma_read(CCR, lch); |
| } |
| if (i >= 100) |
| pr_err("DMA drain did not complete on lch %d\n", lch); |
| /* Restore OCP_SYSCONFIG */ |
| p->dma_write(sys_cf, OCP_SYSCONFIG, lch); |
| } else { |
| l &= ~OMAP_DMA_CCR_EN; |
| p->dma_write(l, CCR, lch); |
| } |
| |
| /* |
| * Ensure that data transferred by DMA is visible to any access |
| * after DMA has been disabled. This is important for coherent |
| * DMA regions. |
| */ |
| mb(); |
| |
| if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { |
| int next_lch, cur_lch = lch; |
| char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; |
| |
| memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); |
| do { |
| /* The loop case: we've been here already */ |
| if (dma_chan_link_map[cur_lch]) |
| break; |
| /* Mark the current channel */ |
| dma_chan_link_map[cur_lch] = 1; |
| |
| disable_lnk(cur_lch); |
| |
| next_lch = dma_chan[cur_lch].next_lch; |
| cur_lch = next_lch; |
| } while (next_lch != -1); |
| } |
| |
| dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_stop_dma); |
| |
| /* |
| * Allows changing the DMA callback function or data. This may be needed if |
| * the driver shares a single DMA channel for multiple dma triggers. |
| */ |
| int omap_set_dma_callback(int lch, |
| void (*callback)(int lch, u16 ch_status, void *data), |
| void *data) |
| { |
| unsigned long flags; |
| |
| if (lch < 0) |
| return -ENODEV; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| if (dma_chan[lch].dev_id == -1) { |
| printk(KERN_ERR "DMA callback for not set for free channel\n"); |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| return -EINVAL; |
| } |
| dma_chan[lch].callback = callback; |
| dma_chan[lch].data = data; |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_set_dma_callback); |
| |
| /* |
| * Returns current physical source address for the given DMA channel. |
| * If the channel is running the caller must disable interrupts prior calling |
| * this function and process the returned value before re-enabling interrupt to |
| * prevent races with the interrupt handler. Note that in continuous mode there |
| * is a chance for CSSA_L register overflow between the two reads resulting |
| * in incorrect return value. |
| */ |
| dma_addr_t omap_get_dma_src_pos(int lch) |
| { |
| dma_addr_t offset = 0; |
| |
| if (dma_omap15xx()) |
| offset = p->dma_read(CPC, lch); |
| else |
| offset = p->dma_read(CSAC, lch); |
| |
| if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) |
| offset = p->dma_read(CSAC, lch); |
| |
| if (!dma_omap15xx()) { |
| /* |
| * CDAC == 0 indicates that the DMA transfer on the channel has |
| * not been started (no data has been transferred so far). |
| * Return the programmed source start address in this case. |
| */ |
| if (likely(p->dma_read(CDAC, lch))) |
| offset = p->dma_read(CSAC, lch); |
| else |
| offset = p->dma_read(CSSA, lch); |
| } |
| |
| if (dma_omap1()) |
| offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); |
| |
| return offset; |
| } |
| EXPORT_SYMBOL(omap_get_dma_src_pos); |
| |
| /* |
| * Returns current physical destination address for the given DMA channel. |
| * If the channel is running the caller must disable interrupts prior calling |
| * this function and process the returned value before re-enabling interrupt to |
| * prevent races with the interrupt handler. Note that in continuous mode there |
| * is a chance for CDSA_L register overflow between the two reads resulting |
| * in incorrect return value. |
| */ |
| dma_addr_t omap_get_dma_dst_pos(int lch) |
| { |
| dma_addr_t offset = 0; |
| |
| if (dma_omap15xx()) |
| offset = p->dma_read(CPC, lch); |
| else |
| offset = p->dma_read(CDAC, lch); |
| |
| /* |
| * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is |
| * read before the DMA controller finished disabling the channel. |
| */ |
| if (!dma_omap15xx() && offset == 0) { |
| offset = p->dma_read(CDAC, lch); |
| /* |
| * CDAC == 0 indicates that the DMA transfer on the channel has |
| * not been started (no data has been transferred so far). |
| * Return the programmed destination start address in this case. |
| */ |
| if (unlikely(!offset)) |
| offset = p->dma_read(CDSA, lch); |
| } |
| |
| if (dma_omap1()) |
| offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); |
| |
| return offset; |
| } |
| EXPORT_SYMBOL(omap_get_dma_dst_pos); |
| |
| int omap_get_dma_active_status(int lch) |
| { |
| return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0; |
| } |
| EXPORT_SYMBOL(omap_get_dma_active_status); |
| |
| int omap_dma_running(void) |
| { |
| int lch; |
| |
| if (dma_omap1()) |
| if (omap_lcd_dma_running()) |
| return 1; |
| |
| for (lch = 0; lch < dma_chan_count; lch++) |
| if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * lch_queue DMA will start right after lch_head one is finished. |
| * For this DMA link to start, you still need to start (see omap_start_dma) |
| * the first one. That will fire up the entire queue. |
| */ |
| void omap_dma_link_lch(int lch_head, int lch_queue) |
| { |
| if (omap_dma_in_1510_mode()) { |
| if (lch_head == lch_queue) { |
| p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8), |
| CCR, lch_head); |
| return; |
| } |
| printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); |
| BUG(); |
| return; |
| } |
| |
| if ((dma_chan[lch_head].dev_id == -1) || |
| (dma_chan[lch_queue].dev_id == -1)) { |
| pr_err("omap_dma: trying to link non requested channels\n"); |
| dump_stack(); |
| } |
| |
| dma_chan[lch_head].next_lch = lch_queue; |
| } |
| EXPORT_SYMBOL(omap_dma_link_lch); |
| |
| /* |
| * Once the DMA queue is stopped, we can destroy it. |
| */ |
| void omap_dma_unlink_lch(int lch_head, int lch_queue) |
| { |
| if (omap_dma_in_1510_mode()) { |
| if (lch_head == lch_queue) { |
| p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8), |
| CCR, lch_head); |
| return; |
| } |
| printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); |
| BUG(); |
| return; |
| } |
| |
| if (dma_chan[lch_head].next_lch != lch_queue || |
| dma_chan[lch_head].next_lch == -1) { |
| pr_err("omap_dma: trying to unlink non linked channels\n"); |
| dump_stack(); |
| } |
| |
| if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || |
| (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) { |
| pr_err("omap_dma: You need to stop the DMA channels before unlinking\n"); |
| dump_stack(); |
| } |
| |
| dma_chan[lch_head].next_lch = -1; |
| } |
| EXPORT_SYMBOL(omap_dma_unlink_lch); |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| /* Create chain of DMA channesls */ |
| static void create_dma_lch_chain(int lch_head, int lch_queue) |
| { |
| u32 l; |
| |
| /* Check if this is the first link in chain */ |
| if (dma_chan[lch_head].next_linked_ch == -1) { |
| dma_chan[lch_head].next_linked_ch = lch_queue; |
| dma_chan[lch_head].prev_linked_ch = lch_queue; |
| dma_chan[lch_queue].next_linked_ch = lch_head; |
| dma_chan[lch_queue].prev_linked_ch = lch_head; |
| } |
| |
| /* a link exists, link the new channel in circular chain */ |
| else { |
| dma_chan[lch_queue].next_linked_ch = |
| dma_chan[lch_head].next_linked_ch; |
| dma_chan[lch_queue].prev_linked_ch = lch_head; |
| dma_chan[lch_head].next_linked_ch = lch_queue; |
| dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = |
| lch_queue; |
| } |
| |
| l = p->dma_read(CLNK_CTRL, lch_head); |
| l &= ~(0x1f); |
| l |= lch_queue; |
| p->dma_write(l, CLNK_CTRL, lch_head); |
| |
| l = p->dma_read(CLNK_CTRL, lch_queue); |
| l &= ~(0x1f); |
| l |= (dma_chan[lch_queue].next_linked_ch); |
| p->dma_write(l, CLNK_CTRL, lch_queue); |
| } |
| |
| /** |
| * @brief omap_request_dma_chain : Request a chain of DMA channels |
| * |
| * @param dev_id - Device id using the dma channel |
| * @param dev_name - Device name |
| * @param callback - Call back function |
| * @chain_id - |
| * @no_of_chans - Number of channels requested |
| * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN |
| * OMAP_DMA_DYNAMIC_CHAIN |
| * @params - Channel parameters |
| * |
| * @return - Success : 0 |
| * Failure: -EINVAL/-ENOMEM |
| */ |
| int omap_request_dma_chain(int dev_id, const char *dev_name, |
| void (*callback) (int lch, u16 ch_status, |
| void *data), |
| int *chain_id, int no_of_chans, int chain_mode, |
| struct omap_dma_channel_params params) |
| { |
| int *channels; |
| int i, err; |
| |
| /* Is the chain mode valid ? */ |
| if (chain_mode != OMAP_DMA_STATIC_CHAIN |
| && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { |
| printk(KERN_ERR "Invalid chain mode requested\n"); |
| return -EINVAL; |
| } |
| |
| if (unlikely((no_of_chans < 1 |
| || no_of_chans > dma_lch_count))) { |
| printk(KERN_ERR "Invalid Number of channels requested\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Allocate a queue to maintain the status of the channels |
| * in the chain |
| */ |
| channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); |
| if (channels == NULL) { |
| printk(KERN_ERR "omap_dma: No memory for channel queue\n"); |
| return -ENOMEM; |
| } |
| |
| /* request and reserve DMA channels for the chain */ |
| for (i = 0; i < no_of_chans; i++) { |
| err = omap_request_dma(dev_id, dev_name, |
| callback, NULL, &channels[i]); |
| if (err < 0) { |
| int j; |
| for (j = 0; j < i; j++) |
| omap_free_dma(channels[j]); |
| kfree(channels); |
| printk(KERN_ERR "omap_dma: Request failed %d\n", err); |
| return err; |
| } |
| dma_chan[channels[i]].prev_linked_ch = -1; |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| |
| /* |
| * Allowing client drivers to set common parameters now, |
| * so that later only relevant (src_start, dest_start |
| * and element count) can be set |
| */ |
| omap_set_dma_params(channels[i], ¶ms); |
| } |
| |
| *chain_id = channels[0]; |
| dma_linked_lch[*chain_id].linked_dmach_q = channels; |
| dma_linked_lch[*chain_id].chain_mode = chain_mode; |
| dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; |
| dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; |
| |
| for (i = 0; i < no_of_chans; i++) |
| dma_chan[channels[i]].chain_id = *chain_id; |
| |
| /* Reset the Queue pointers */ |
| OMAP_DMA_CHAIN_QINIT(*chain_id); |
| |
| /* Set up the chain */ |
| if (no_of_chans == 1) |
| create_dma_lch_chain(channels[0], channels[0]); |
| else { |
| for (i = 0; i < (no_of_chans - 1); i++) |
| create_dma_lch_chain(channels[i], channels[i + 1]); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_request_dma_chain); |
| |
| /** |
| * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the |
| * params after setting it. Dont do this while dma is running!! |
| * |
| * @param chain_id - Chained logical channel id. |
| * @param params |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_modify_dma_chain_params(int chain_id, |
| struct omap_dma_channel_params params) |
| { |
| int *channels; |
| u32 i; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 |
| || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| /* |
| * Allowing client drivers to set common parameters now, |
| * so that later only relevant (src_start, dest_start |
| * and element count) can be set |
| */ |
| omap_set_dma_params(channels[i], ¶ms); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_modify_dma_chain_params); |
| |
| /** |
| * @brief omap_free_dma_chain - Free all the logical channels in a chain. |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_free_dma_chain(int chain_id) |
| { |
| int *channels; |
| u32 i; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| dma_chan[channels[i]].next_linked_ch = -1; |
| dma_chan[channels[i]].prev_linked_ch = -1; |
| dma_chan[channels[i]].chain_id = -1; |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| omap_free_dma(channels[i]); |
| } |
| |
| kfree(channels); |
| |
| dma_linked_lch[chain_id].linked_dmach_q = NULL; |
| dma_linked_lch[chain_id].chain_mode = -1; |
| dma_linked_lch[chain_id].chain_state = -1; |
| |
| return (0); |
| } |
| EXPORT_SYMBOL(omap_free_dma_chain); |
| |
| /** |
| * @brief omap_dma_chain_status - Check if the chain is in |
| * active / inactive state. |
| * @param chain_id |
| * |
| * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE |
| * Failure : -EINVAL |
| */ |
| int omap_dma_chain_status(int chain_id) |
| { |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, |
| dma_linked_lch[chain_id].q_count); |
| |
| if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) |
| return OMAP_DMA_CHAIN_INACTIVE; |
| |
| return OMAP_DMA_CHAIN_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_dma_chain_status); |
| |
| /** |
| * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, |
| * set the params and start the transfer. |
| * |
| * @param chain_id |
| * @param src_start - buffer start address |
| * @param dest_start - Dest address |
| * @param elem_count |
| * @param frame_count |
| * @param callbk_data - channel callback parameter data. |
| * |
| * @return - Success : 0 |
| * Failure: -EINVAL/-EBUSY |
| */ |
| int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, |
| int elem_count, int frame_count, void *callbk_data) |
| { |
| int *channels; |
| u32 l, lch; |
| int start_dma = 0; |
| |
| /* |
| * if buffer size is less than 1 then there is |
| * no use of starting the chain |
| */ |
| if (elem_count < 1) { |
| printk(KERN_ERR "Invalid buffer size\n"); |
| return -EINVAL; |
| } |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 |
| || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exist\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if all the channels in chain are in use */ |
| if (OMAP_DMA_CHAIN_QFULL(chain_id)) |
| return -EBUSY; |
| |
| /* Frame count may be negative in case of indexed transfers */ |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get a free channel */ |
| lch = channels[dma_linked_lch[chain_id].q_tail]; |
| |
| /* Store the callback data */ |
| dma_chan[lch].data = callbk_data; |
| |
| /* Increment the q_tail */ |
| OMAP_DMA_CHAIN_INCQTAIL(chain_id); |
| |
| /* Set the params to the free channel */ |
| if (src_start != 0) |
| p->dma_write(src_start, CSSA, lch); |
| if (dest_start != 0) |
| p->dma_write(dest_start, CDSA, lch); |
| |
| /* Write the buffer size */ |
| p->dma_write(elem_count, CEN, lch); |
| p->dma_write(frame_count, CFN, lch); |
| |
| /* |
| * If the chain is dynamically linked, |
| * then we may have to start the chain if its not active |
| */ |
| if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { |
| |
| /* |
| * In Dynamic chain, if the chain is not started, |
| * queue the channel |
| */ |
| if (dma_linked_lch[chain_id].chain_state == |
| DMA_CHAIN_NOTSTARTED) { |
| /* Enable the link in previous channel */ |
| if (dma_chan[dma_chan[lch].prev_linked_ch].state == |
| DMA_CH_QUEUED) |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| } |
| |
| /* |
| * Chain is already started, make sure its active, |
| * if not then start the chain |
| */ |
| else { |
| start_dma = 1; |
| |
| if (dma_chan[dma_chan[lch].prev_linked_ch].state == |
| DMA_CH_STARTED) { |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| start_dma = 0; |
| if (0 == ((1 << 7) & p->dma_read( |
| CCR, dma_chan[lch].prev_linked_ch))) { |
| disable_lnk(dma_chan[lch]. |
| prev_linked_ch); |
| pr_debug("\n prev ch is stopped\n"); |
| start_dma = 1; |
| } |
| } |
| |
| else if (dma_chan[dma_chan[lch].prev_linked_ch].state |
| == DMA_CH_QUEUED) { |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| start_dma = 0; |
| } |
| omap_enable_channel_irq(lch); |
| |
| l = p->dma_read(CCR, lch); |
| |
| if ((0 == (l & (1 << 24)))) |
| l &= ~(1 << 25); |
| else |
| l |= (1 << 25); |
| if (start_dma == 1) { |
| if (0 == (l & (1 << 7))) { |
| l |= (1 << 7); |
| dma_chan[lch].state = DMA_CH_STARTED; |
| pr_debug("starting %d\n", lch); |
| p->dma_write(l, CCR, lch); |
| } else |
| start_dma = 0; |
| } else { |
| if (0 == (l & (1 << 7))) |
| p->dma_write(l, CCR, lch); |
| } |
| dma_chan[lch].flags |= OMAP_DMA_ACTIVE; |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dma_chain_a_transfer); |
| |
| /** |
| * @brief omap_start_dma_chain_transfers - Start the chain |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL/-EBUSY |
| */ |
| int omap_start_dma_chain_transfers(int chain_id) |
| { |
| int *channels; |
| u32 l, i; |
| |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { |
| printk(KERN_ERR "Chain is already started\n"); |
| return -EBUSY; |
| } |
| |
| if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; |
| i++) { |
| enable_lnk(channels[i]); |
| omap_enable_channel_irq(channels[i]); |
| } |
| } else { |
| omap_enable_channel_irq(channels[0]); |
| } |
| |
| l = p->dma_read(CCR, channels[0]); |
| l |= (1 << 7); |
| dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; |
| dma_chan[channels[0]].state = DMA_CH_STARTED; |
| |
| if ((0 == (l & (1 << 24)))) |
| l &= ~(1 << 25); |
| else |
| l |= (1 << 25); |
| p->dma_write(l, CCR, channels[0]); |
| |
| dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_start_dma_chain_transfers); |
| |
| /** |
| * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : EINVAL |
| */ |
| int omap_stop_dma_chain_transfers(int chain_id) |
| { |
| int *channels; |
| u32 l, i; |
| u32 sys_cf = 0; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| if (IS_DMA_ERRATA(DMA_ERRATA_i88)) { |
| sys_cf = p->dma_read(OCP_SYSCONFIG, 0); |
| l = sys_cf; |
| /* Middle mode reg set no Standby */ |
| l &= ~((1 << 12)|(1 << 13)); |
| p->dma_write(l, OCP_SYSCONFIG, 0); |
| } |
| |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| |
| /* Stop the Channel transmission */ |
| l = p->dma_read(CCR, channels[i]); |
| l &= ~(1 << 7); |
| p->dma_write(l, CCR, channels[i]); |
| |
| /* Disable the link in all the channels */ |
| disable_lnk(channels[i]); |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| |
| } |
| dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; |
| |
| /* Reset the Queue pointers */ |
| OMAP_DMA_CHAIN_QINIT(chain_id); |
| |
| if (IS_DMA_ERRATA(DMA_ERRATA_i88)) |
| p->dma_write(sys_cf, OCP_SYSCONFIG, 0); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_stop_dma_chain_transfers); |
| |
| /* Get the index of the ongoing DMA in chain */ |
| /** |
| * @brief omap_get_dma_chain_index - Get the element and frame index |
| * of the ongoing DMA in chain |
| * |
| * @param chain_id |
| * @param ei - Element index |
| * @param fi - Frame index |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| if ((!ei) || (!fi)) |
| return -EINVAL; |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| *ei = p->dma_read(CCEN, lch); |
| *fi = p->dma_read(CCFN, lch); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_index); |
| |
| /** |
| * @brief omap_get_dma_chain_dst_pos - Get the destination position of the |
| * ongoing DMA in chain |
| * |
| * @param chain_id |
| * |
| * @return - Success : Destination position |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_dst_pos(int chain_id) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| return p->dma_read(CDAC, lch); |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); |
| |
| /** |
| * @brief omap_get_dma_chain_src_pos - Get the source position |
| * of the ongoing DMA in chain |
| * @param chain_id |
| * |
| * @return - Success : Destination position |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_src_pos(int chain_id) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| return p->dma_read(CSAC, lch); |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_src_pos); |
| #endif /* ifndef CONFIG_ARCH_OMAP1 */ |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| |
| static int omap1_dma_handle_ch(int ch) |
| { |
| u32 csr; |
| |
| if (enable_1510_mode && ch >= 6) { |
| csr = dma_chan[ch].saved_csr; |
| dma_chan[ch].saved_csr = 0; |
| } else |
| csr = p->dma_read(CSR, ch); |
| if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { |
| dma_chan[ch + 6].saved_csr = csr >> 7; |
| csr &= 0x7f; |
| } |
| if ((csr & 0x3f) == 0) |
| return 0; |
| if (unlikely(dma_chan[ch].dev_id == -1)) { |
| pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n", |
| ch, csr); |
| return 0; |
| } |
| if (unlikely(csr & OMAP1_DMA_TOUT_IRQ)) |
| pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id); |
| if (unlikely(csr & OMAP_DMA_DROP_IRQ)) |
| pr_warn("DMA synchronization event drop occurred with device %d\n", |
| dma_chan[ch].dev_id); |
| if (likely(csr & OMAP_DMA_BLOCK_IRQ)) |
| dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; |
| if (likely(dma_chan[ch].callback != NULL)) |
| dma_chan[ch].callback(ch, csr, dma_chan[ch].data); |
| |
| return 1; |
| } |
| |
| static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) |
| { |
| int ch = ((int) dev_id) - 1; |
| int handled = 0; |
| |
| for (;;) { |
| int handled_now = 0; |
| |
| handled_now += omap1_dma_handle_ch(ch); |
| if (enable_1510_mode && dma_chan[ch + 6].saved_csr) |
| handled_now += omap1_dma_handle_ch(ch + 6); |
| if (!handled_now) |
| break; |
| handled += handled_now; |
| } |
| |
| return handled ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| #else |
| #define omap1_dma_irq_handler NULL |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP2PLUS |
| |
| static int omap2_dma_handle_ch(int ch) |
| { |
| u32 status = p->dma_read(CSR, ch); |
| |
| if (!status) { |
| if (printk_ratelimit()) |
| pr_warn("Spurious DMA IRQ for lch %d\n", ch); |
| p->dma_write(1 << ch, IRQSTATUS_L0, ch); |
| return 0; |
| } |
| if (unlikely(dma_chan[ch].dev_id == -1)) { |
| if (printk_ratelimit()) |
| pr_warn("IRQ %04x for non-allocated DMA channel %d\n", |
| status, ch); |
| return 0; |
| } |
| if (unlikely(status & OMAP_DMA_DROP_IRQ)) |
| pr_info("DMA synchronization event drop occurred with device %d\n", |
| dma_chan[ch].dev_id); |
| if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) { |
| printk(KERN_INFO "DMA transaction error with device %d\n", |
| dma_chan[ch].dev_id); |
| if (IS_DMA_ERRATA(DMA_ERRATA_i378)) { |
| u32 ccr; |
| |
| ccr = p->dma_read(CCR, ch); |
| ccr &= ~OMAP_DMA_CCR_EN; |
| p->dma_write(ccr, CCR, ch); |
| dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| } |
| if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ)) |
| printk(KERN_INFO "DMA secure error with device %d\n", |
| dma_chan[ch].dev_id); |
| if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ)) |
| printk(KERN_INFO "DMA misaligned error with device %d\n", |
| dma_chan[ch].dev_id); |
| |
| p->dma_write(status, CSR, ch); |
| p->dma_write(1 << ch, IRQSTATUS_L0, ch); |
| /* read back the register to flush the write */ |
| p->dma_read(IRQSTATUS_L0, ch); |
| |
| /* If the ch is not chained then chain_id will be -1 */ |
| if (dma_chan[ch].chain_id != -1) { |
| int chain_id = dma_chan[ch].chain_id; |
| dma_chan[ch].state = DMA_CH_NOTSTARTED; |
| if (p->dma_read(CLNK_CTRL, ch) & (1 << 15)) |
| dma_chan[dma_chan[ch].next_linked_ch].state = |
| DMA_CH_STARTED; |
| if (dma_linked_lch[chain_id].chain_mode == |
| OMAP_DMA_DYNAMIC_CHAIN) |
| disable_lnk(ch); |
| |
| if (!OMAP_DMA_CHAIN_QEMPTY(chain_id)) |
| OMAP_DMA_CHAIN_INCQHEAD(chain_id); |
| |
| status = p->dma_read(CSR, ch); |
| p->dma_write(status, CSR, ch); |
| } |
| |
| if (likely(dma_chan[ch].callback != NULL)) |
| dma_chan[ch].callback(ch, status, dma_chan[ch].data); |
| |
| return 0; |
| } |
| |
| /* STATUS register count is from 1-32 while our is 0-31 */ |
| static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) |
| { |
| u32 val, enable_reg; |
| int i; |
| |
| val = p->dma_read(IRQSTATUS_L0, 0); |
| if (val == 0) { |
| if (printk_ratelimit()) |
| printk(KERN_WARNING "Spurious DMA IRQ\n"); |
| return IRQ_HANDLED; |
| } |
| enable_reg = p->dma_read(IRQENABLE_L0, 0); |
| val &= enable_reg; /* Dispatch only relevant interrupts */ |
| for (i = 0; i < dma_lch_count && val != 0; i++) { |
| if (val & 1) |
| omap2_dma_handle_ch(i); |
| val >>= 1; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction omap24xx_dma_irq = { |
| .name = "DMA", |
| .handler = omap2_dma_irq_handler, |
| .flags = IRQF_DISABLED |
| }; |
| |
| #else |
| static struct irqaction omap24xx_dma_irq; |
| #endif |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| void omap_dma_global_context_save(void) |
| { |
| omap_dma_global_context.dma_irqenable_l0 = |
| p->dma_read(IRQENABLE_L0, 0); |
| omap_dma_global_context.dma_ocp_sysconfig = |
| p->dma_read(OCP_SYSCONFIG, 0); |
| omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0); |
| } |
| |
| void omap_dma_global_context_restore(void) |
| { |
| int ch; |
| |
| p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0); |
| p->dma_write(omap_dma_global_context.dma_ocp_sysconfig, |
| OCP_SYSCONFIG, 0); |
| p->dma_write(omap_dma_global_context.dma_irqenable_l0, |
| IRQENABLE_L0, 0); |
| |
| if (IS_DMA_ERRATA(DMA_ROMCODE_BUG)) |
| p->dma_write(0x3 , IRQSTATUS_L0, 0); |
| |
| for (ch = 0; ch < dma_chan_count; ch++) |
| if (dma_chan[ch].dev_id != -1) |
| omap_clear_dma(ch); |
| } |
| |
| static int omap_system_dma_probe(struct platform_device *pdev) |
| { |
| int ch, ret = 0; |
| int dma_irq; |
| char irq_name[4]; |
| int irq_rel; |
| |
| p = pdev->dev.platform_data; |
| if (!p) { |
| dev_err(&pdev->dev, |
| "%s: System DMA initialized without platform data\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| d = p->dma_attr; |
| errata = p->errata; |
| |
| if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels |
| && (omap_dma_reserve_channels < d->lch_count)) |
| d->lch_count = omap_dma_reserve_channels; |
| |
| dma_lch_count = d->lch_count; |
| dma_chan_count = dma_lch_count; |
| dma_chan = d->chan; |
| enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; |
| |
| if (dma_omap2plus()) { |
| dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * |
| dma_lch_count, GFP_KERNEL); |
| if (!dma_linked_lch) { |
| ret = -ENOMEM; |
| goto exit_dma_lch_fail; |
| } |
| } |
| |
| spin_lock_init(&dma_chan_lock); |
| for (ch = 0; ch < dma_chan_count; ch++) { |
| omap_clear_dma(ch); |
| if (dma_omap2plus()) |
| omap2_disable_irq_lch(ch); |
| |
| dma_chan[ch].dev_id = -1; |
| dma_chan[ch].next_lch = -1; |
| |
| if (ch >= 6 && enable_1510_mode) |
| continue; |
| |
| if (dma_omap1()) { |
| /* |
| * request_irq() doesn't like dev_id (ie. ch) being |
| * zero, so we have to kludge around this. |
| */ |
| sprintf(&irq_name[0], "%d", ch); |
| dma_irq = platform_get_irq_byname(pdev, irq_name); |
| |
| if (dma_irq < 0) { |
| ret = dma_irq; |
| goto exit_dma_irq_fail; |
| } |
| |
| /* INT_DMA_LCD is handled in lcd_dma.c */ |
| if (dma_irq == INT_DMA_LCD) |
| continue; |
| |
| ret = request_irq(dma_irq, |
| omap1_dma_irq_handler, 0, "DMA", |
| (void *) (ch + 1)); |
| if (ret != 0) |
| goto exit_dma_irq_fail; |
| } |
| } |
| |
| if (d->dev_caps & IS_RW_PRIORITY) |
| omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, |
| DMA_DEFAULT_FIFO_DEPTH, 0); |
| |
| if (dma_omap2plus()) { |
| strcpy(irq_name, "0"); |
| dma_irq = platform_get_irq_byname(pdev, irq_name); |
| if (dma_irq < 0) { |
| dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq); |
| ret = dma_irq; |
| goto exit_dma_lch_fail; |
| } |
| ret = setup_irq(dma_irq, &omap24xx_dma_irq); |
| if (ret) { |
| dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n", |
| dma_irq, ret); |
| goto exit_dma_lch_fail; |
| } |
| } |
| |
| /* reserve dma channels 0 and 1 in high security devices on 34xx */ |
| if (d->dev_caps & HS_CHANNELS_RESERVED) { |
| pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); |
| dma_chan[0].dev_id = 0; |
| dma_chan[1].dev_id = 1; |
| } |
| p->show_dma_caps(); |
| return 0; |
| |
| exit_dma_irq_fail: |
| dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n", |
| dma_irq, ret); |
| for (irq_rel = 0; irq_rel < ch; irq_rel++) { |
| dma_irq = platform_get_irq(pdev, irq_rel); |
| free_irq(dma_irq, (void *)(irq_rel + 1)); |
| } |
| |
| exit_dma_lch_fail: |
| kfree(dma_chan); |
| return ret; |
| } |
| |
| static int omap_system_dma_remove(struct platform_device *pdev) |
| { |
| int dma_irq; |
| |
| if (dma_omap2plus()) { |
| char irq_name[4]; |
| strcpy(irq_name, "0"); |
| dma_irq = platform_get_irq_byname(pdev, irq_name); |
| remove_irq(dma_irq, &omap24xx_dma_irq); |
| } else { |
| int irq_rel = 0; |
| for ( ; irq_rel < dma_chan_count; irq_rel++) { |
| dma_irq = platform_get_irq(pdev, irq_rel); |
| free_irq(dma_irq, (void *)(irq_rel + 1)); |
| } |
| } |
| kfree(dma_chan); |
| return 0; |
| } |
| |
| static struct platform_driver omap_system_dma_driver = { |
| .probe = omap_system_dma_probe, |
| .remove = omap_system_dma_remove, |
| .driver = { |
| .name = "omap_dma_system" |
| }, |
| }; |
| |
| static int __init omap_system_dma_init(void) |
| { |
| return platform_driver_register(&omap_system_dma_driver); |
| } |
| arch_initcall(omap_system_dma_init); |
| |
| static void __exit omap_system_dma_exit(void) |
| { |
| platform_driver_unregister(&omap_system_dma_driver); |
| } |
| |
| MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_AUTHOR("Texas Instruments Inc"); |
| |
| /* |
| * Reserve the omap SDMA channels using cmdline bootarg |
| * "omap_dma_reserve_ch=". The valid range is 1 to 32 |
| */ |
| static int __init omap_dma_cmdline_reserve_ch(char *str) |
| { |
| if (get_option(&str, &omap_dma_reserve_channels) != 1) |
| omap_dma_reserve_channels = 0; |
| return 1; |
| } |
| |
| __setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch); |
| |
| |