| config VIDEO_DAVINCI_VPIF_DISPLAY |
| tristate "TI DaVinci VPIF V4L2-Display driver" |
| depends on VIDEO_V4L2 |
| depends on ARCH_DAVINCI || COMPILE_TEST |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT |
| select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT |
| help |
| Enables Davinci VPIF module used for display devices. |
| This module is used for display on TI DM6467/DA850/OMAPL138 |
| SoCs. |
| |
| To compile this driver as a module, choose M here. There will |
| be two modules called vpif.ko and vpif_display.ko |
| |
| config VIDEO_DAVINCI_VPIF_CAPTURE |
| tristate "TI DaVinci VPIF video capture driver" |
| depends on VIDEO_V4L2 |
| depends on ARCH_DAVINCI || COMPILE_TEST |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| Enables Davinci VPIF module used for capture devices. |
| This module is used for capture on TI DM6467/DA850/OMAPL138 |
| SoCs. |
| |
| To compile this driver as a module, choose M here. There will |
| be two modules called vpif.ko and vpif_capture.ko |
| |
| config VIDEO_DM6446_CCDC |
| tristate "TI DM6446 CCDC video capture driver" |
| depends on VIDEO_V4L2 |
| depends on ARCH_DAVINCI || COMPILE_TEST |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF_DMA_CONTIG |
| help |
| Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces |
| with decoder modules such as TVP5146 over BT656 or |
| sensor module such as MT9T001 over a raw interface. This |
| module configures the interface and CCDC/ISIF to do |
| video frame capture from slave decoders. |
| |
| To compile this driver as a module, choose M here. There will |
| be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko |
| |
| config VIDEO_DM355_CCDC |
| tristate "TI DM355 CCDC video capture driver" |
| depends on VIDEO_V4L2 |
| depends on ARCH_DAVINCI || COMPILE_TEST |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF_DMA_CONTIG |
| help |
| Enables DM355 CCD hw module. DM355 CCDC hw interfaces |
| with decoder modules such as TVP5146 over BT656 or |
| sensor module such as MT9T001 over a raw interface. This |
| module configures the interface and CCDC/ISIF to do |
| video frame capture from a slave decoders |
| |
| To compile this driver as a module, choose M here. There will |
| be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko |
| |
| config VIDEO_DM365_ISIF |
| tristate "TI DM365 ISIF video capture driver" |
| depends on VIDEO_V4L2 && ARCH_DAVINCI |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF_DMA_CONTIG |
| help |
| Enables ISIF hw module. This is the hardware module for |
| configuring ISIF in VPFE to capture Raw Bayer RGB data from |
| a image sensor or YUV data from a YUV source. |
| |
| To compile this driver as a module, choose M here. There will |
| be three modules called vpfe_capture.ko, vpss.ko and isif.ko |
| |
| config VIDEO_DAVINCI_VPBE_DISPLAY |
| tristate "TI DaVinci VPBE V4L2-Display driver" |
| depends on VIDEO_V4L2 && ARCH_DAVINCI |
| depends on HAS_DMA |
| depends on I2C |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| Enables Davinci VPBE module used for display devices. |
| This module is used for display on TI DM644x/DM365/DM355 |
| based display devices. |
| |
| To compile this driver as a module, choose M here. There will |
| be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko, |
| vpbe_venc.ko and vpbe_display.ko |
