| /* |
| * usbvision-core.c - driver for NT100x USB video capture devices |
| * |
| * |
| * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> |
| * Dwaine Garden <dwainegarden@rogers.com> |
| * |
| * This module is part of usbvision driver project. |
| * Updates to driver completed by Dwaine P. Garden |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/timer.h> |
| #include <linux/gfp.h> |
| #include <linux/mm.h> |
| #include <linux/highmem.h> |
| #include <linux/vmalloc.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <linux/videodev2.h> |
| #include <linux/i2c.h> |
| |
| #include <media/i2c/saa7115.h> |
| #include <media/v4l2-common.h> |
| #include <media/tuner.h> |
| |
| #include <linux/workqueue.h> |
| |
| #include "usbvision.h" |
| |
| static unsigned int core_debug; |
| module_param(core_debug, int, 0644); |
| MODULE_PARM_DESC(core_debug, "enable debug messages [core]"); |
| |
| static int adjust_compression = 1; /* Set the compression to be adaptive */ |
| module_param(adjust_compression, int, 0444); |
| MODULE_PARM_DESC(adjust_compression, " Set the ADPCM compression for the device. Default: 1 (On)"); |
| |
| /* To help people with Black and White output with using s-video input. |
| * Some cables and input device are wired differently. */ |
| static int switch_svideo_input; |
| module_param(switch_svideo_input, int, 0444); |
| MODULE_PARM_DESC(switch_svideo_input, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)"); |
| |
| static unsigned int adjust_x_offset = -1; |
| module_param(adjust_x_offset, int, 0644); |
| MODULE_PARM_DESC(adjust_x_offset, "adjust X offset display [core]"); |
| |
| static unsigned int adjust_y_offset = -1; |
| module_param(adjust_y_offset, int, 0644); |
| MODULE_PARM_DESC(adjust_y_offset, "adjust Y offset display [core]"); |
| |
| |
| #define ENABLE_HEXDUMP 0 /* Enable if you need it */ |
| |
| |
| #ifdef USBVISION_DEBUG |
| #define PDEBUG(level, fmt, args...) { \ |
| if (core_debug & (level)) \ |
| printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ |
| __func__, __LINE__ , ## args); \ |
| } |
| #else |
| #define PDEBUG(level, fmt, args...) do {} while (0) |
| #endif |
| |
| #define DBG_HEADER (1 << 0) |
| #define DBG_IRQ (1 << 1) |
| #define DBG_ISOC (1 << 2) |
| #define DBG_PARSE (1 << 3) |
| #define DBG_SCRATCH (1 << 4) |
| #define DBG_FUNC (1 << 5) |
| |
| /* The value of 'scratch_buf_size' affects quality of the picture |
| * in many ways. Shorter buffers may cause loss of data when client |
| * is too slow. Larger buffers are memory-consuming and take longer |
| * to work with. This setting can be adjusted, but the default value |
| * should be OK for most desktop users. |
| */ |
| #define DEFAULT_SCRATCH_BUF_SIZE (0x20000) /* 128kB memory scratch buffer */ |
| static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE; |
| |
| /* Function prototypes */ |
| static int usbvision_request_intra(struct usb_usbvision *usbvision); |
| static int usbvision_unrequest_intra(struct usb_usbvision *usbvision); |
| static int usbvision_adjust_compression(struct usb_usbvision *usbvision); |
| static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision); |
| |
| /*******************************/ |
| /* Memory management functions */ |
| /*******************************/ |
| |
| /* |
| * Here we want the physical address of the memory. |
| * This is used when initializing the contents of the area. |
| */ |
| |
| static void *usbvision_rvmalloc(unsigned long size) |
| { |
| void *mem; |
| unsigned long adr; |
| |
| size = PAGE_ALIGN(size); |
| mem = vmalloc_32(size); |
| if (!mem) |
| return NULL; |
| |
| memset(mem, 0, size); /* Clear the ram out, no junk to the user */ |
| adr = (unsigned long) mem; |
| while (size > 0) { |
| SetPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| |
| return mem; |
| } |
| |
| static void usbvision_rvfree(void *mem, unsigned long size) |
| { |
| unsigned long adr; |
| |
| if (!mem) |
| return; |
| |
| size = PAGE_ALIGN(size); |
| |
| adr = (unsigned long) mem; |
| while ((long) size > 0) { |
| ClearPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| |
| vfree(mem); |
| } |
| |
| |
| #if ENABLE_HEXDUMP |
| static void usbvision_hexdump(const unsigned char *data, int len) |
| { |
| char tmp[80]; |
| int i, k; |
| |
| for (i = k = 0; len > 0; i++, len--) { |
| if (i > 0 && (i % 16 == 0)) { |
| printk("%s\n", tmp); |
| k = 0; |
| } |
| k += sprintf(&tmp[k], "%02x ", data[i]); |
| } |
| if (k > 0) |
| printk(KERN_CONT "%s\n", tmp); |
| } |
| #endif |
| |
| /******************************** |
| * scratch ring buffer handling |
| ********************************/ |
| static int scratch_len(struct usb_usbvision *usbvision) /* This returns the amount of data actually in the buffer */ |
| { |
| int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr; |
| |
| if (len < 0) |
| len += scratch_buf_size; |
| PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len); |
| |
| return len; |
| } |
| |
| |
| /* This returns the free space left in the buffer */ |
| static int scratch_free(struct usb_usbvision *usbvision) |
| { |
| int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr; |
| if (free <= 0) |
| free += scratch_buf_size; |
| if (free) { |
| free -= 1; /* at least one byte in the buffer must */ |
| /* left blank, otherwise there is no chance to differ between full and empty */ |
| } |
| PDEBUG(DBG_SCRATCH, "return %d\n", free); |
| |
| return free; |
| } |
| |
| |
| /* This puts data into the buffer */ |
| static int scratch_put(struct usb_usbvision *usbvision, unsigned char *data, |
| int len) |
| { |
| int len_part; |
| |
| if (usbvision->scratch_write_ptr + len < scratch_buf_size) { |
| memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len); |
| usbvision->scratch_write_ptr += len; |
| } else { |
| len_part = scratch_buf_size - usbvision->scratch_write_ptr; |
| memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part); |
| if (len == len_part) { |
| usbvision->scratch_write_ptr = 0; /* just set write_ptr to zero */ |
| } else { |
| memcpy(usbvision->scratch, data + len_part, len - len_part); |
| usbvision->scratch_write_ptr = len - len_part; |
| } |
| } |
| |
| PDEBUG(DBG_SCRATCH, "len=%d, new write_ptr=%d\n", len, usbvision->scratch_write_ptr); |
| |
| return len; |
| } |
| |
| /* This marks the write_ptr as position of new frame header */ |
| static void scratch_mark_header(struct usb_usbvision *usbvision) |
| { |
| PDEBUG(DBG_SCRATCH, "header at write_ptr=%d\n", usbvision->scratch_headermarker_write_ptr); |
| |
| usbvision->scratch_headermarker[usbvision->scratch_headermarker_write_ptr] = |
| usbvision->scratch_write_ptr; |
| usbvision->scratch_headermarker_write_ptr += 1; |
| usbvision->scratch_headermarker_write_ptr %= USBVISION_NUM_HEADERMARKER; |
| } |
| |
| /* This gets data from the buffer at the given "ptr" position */ |
| static int scratch_get_extra(struct usb_usbvision *usbvision, |
| unsigned char *data, int *ptr, int len) |
| { |
| int len_part; |
| |
| if (*ptr + len < scratch_buf_size) { |
| memcpy(data, usbvision->scratch + *ptr, len); |
| *ptr += len; |
| } else { |
| len_part = scratch_buf_size - *ptr; |
| memcpy(data, usbvision->scratch + *ptr, len_part); |
| if (len == len_part) { |
| *ptr = 0; /* just set the y_ptr to zero */ |
| } else { |
| memcpy(data + len_part, usbvision->scratch, len - len_part); |
| *ptr = len - len_part; |
| } |
| } |
| |
| PDEBUG(DBG_SCRATCH, "len=%d, new ptr=%d\n", len, *ptr); |
| |
| return len; |
| } |
| |
| |
| /* This sets the scratch extra read pointer */ |
| static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr, |
| int len) |
| { |
| *ptr = (usbvision->scratch_read_ptr + len) % scratch_buf_size; |
| |
| PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); |
| } |
| |
| |
| /* This increments the scratch extra read pointer */ |
| static void scratch_inc_extra_ptr(int *ptr, int len) |
| { |
| *ptr = (*ptr + len) % scratch_buf_size; |
| |
| PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); |
| } |
| |
| |
| /* This gets data from the buffer */ |
| static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data, |
| int len) |
| { |
| int len_part; |
| |
| if (usbvision->scratch_read_ptr + len < scratch_buf_size) { |
| memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len); |
| usbvision->scratch_read_ptr += len; |
| } else { |
| len_part = scratch_buf_size - usbvision->scratch_read_ptr; |
| memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part); |
| if (len == len_part) { |
| usbvision->scratch_read_ptr = 0; /* just set the read_ptr to zero */ |
| } else { |
| memcpy(data + len_part, usbvision->scratch, len - len_part); |
| usbvision->scratch_read_ptr = len - len_part; |
| } |
| } |
| |
| PDEBUG(DBG_SCRATCH, "len=%d, new read_ptr=%d\n", len, usbvision->scratch_read_ptr); |
| |
| return len; |
| } |
| |
| |
| /* This sets read pointer to next header and returns it */ |
| static int scratch_get_header(struct usb_usbvision *usbvision, |
| struct usbvision_frame_header *header) |
| { |
| int err_code = 0; |
| |
| PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr); |
| |
| while (usbvision->scratch_headermarker_write_ptr - |
| usbvision->scratch_headermarker_read_ptr != 0) { |
| usbvision->scratch_read_ptr = |
| usbvision->scratch_headermarker[usbvision->scratch_headermarker_read_ptr]; |
| usbvision->scratch_headermarker_read_ptr += 1; |
| usbvision->scratch_headermarker_read_ptr %= USBVISION_NUM_HEADERMARKER; |
| scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH); |
| if ((header->magic_1 == USBVISION_MAGIC_1) |
| && (header->magic_2 == USBVISION_MAGIC_2) |
| && (header->header_length == USBVISION_HEADER_LENGTH)) { |
| err_code = USBVISION_HEADER_LENGTH; |
| header->frame_width = header->frame_width_lo + (header->frame_width_hi << 8); |
| header->frame_height = header->frame_height_lo + (header->frame_height_hi << 8); |
| break; |
| } |
| } |
| |
| return err_code; |
| } |
| |
| |
| /* This removes len bytes of old data from the buffer */ |
| static void scratch_rm_old(struct usb_usbvision *usbvision, int len) |
| { |
| usbvision->scratch_read_ptr += len; |
| usbvision->scratch_read_ptr %= scratch_buf_size; |
| PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr); |
| } |
| |
| |
| /* This resets the buffer - kills all data in it too */ |
| static void scratch_reset(struct usb_usbvision *usbvision) |
| { |
| PDEBUG(DBG_SCRATCH, "\n"); |
| |
| usbvision->scratch_read_ptr = 0; |
| usbvision->scratch_write_ptr = 0; |
| usbvision->scratch_headermarker_read_ptr = 0; |
| usbvision->scratch_headermarker_write_ptr = 0; |
| usbvision->isocstate = isoc_state_no_frame; |
| } |
| |
| int usbvision_scratch_alloc(struct usb_usbvision *usbvision) |
| { |
| usbvision->scratch = vmalloc_32(scratch_buf_size); |
| scratch_reset(usbvision); |
| if (usbvision->scratch == NULL) { |
| dev_err(&usbvision->dev->dev, |
| "%s: unable to allocate %d bytes for scratch\n", |
| __func__, scratch_buf_size); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| void usbvision_scratch_free(struct usb_usbvision *usbvision) |
| { |
| vfree(usbvision->scratch); |
| usbvision->scratch = NULL; |
| } |
| |
| /* |
| * usbvision_decompress_alloc() |
| * |
| * allocates intermediate buffer for decompression |
| */ |
| int usbvision_decompress_alloc(struct usb_usbvision *usbvision) |
| { |
| int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2; |
| |
| usbvision->intra_frame_buffer = vmalloc_32(IFB_size); |
| if (usbvision->intra_frame_buffer == NULL) { |
| dev_err(&usbvision->dev->dev, |
| "%s: unable to allocate %d for compr. frame buffer\n", |
| __func__, IFB_size); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /* |
| * usbvision_decompress_free() |
| * |
| * frees intermediate buffer for decompression |
| */ |
| void usbvision_decompress_free(struct usb_usbvision *usbvision) |
| { |
| vfree(usbvision->intra_frame_buffer); |
| usbvision->intra_frame_buffer = NULL; |
| |
| } |
| |
| /************************************************************ |
| * Here comes the data parsing stuff that is run as interrupt |
| ************************************************************/ |
| /* |
| * usbvision_find_header() |
| * |
| * Locate one of supported header markers in the scratch buffer. |
| */ |
| static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision) |
| { |
| struct usbvision_frame *frame; |
| int found_header = 0; |
| |
| frame = usbvision->cur_frame; |
| |
| while (scratch_get_header(usbvision, &frame->isoc_header) == USBVISION_HEADER_LENGTH) { |
| /* found header in scratch */ |
| PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u", |
| frame->isoc_header.magic_2, |
| frame->isoc_header.magic_1, |
| frame->isoc_header.header_length, |
| frame->isoc_header.frame_num, |
| frame->isoc_header.frame_phase, |
| frame->isoc_header.frame_latency, |
| frame->isoc_header.data_format, |
| frame->isoc_header.format_param, |
| frame->isoc_header.frame_width, |
| frame->isoc_header.frame_height); |
| |
| if (usbvision->request_intra) { |
| if (frame->isoc_header.format_param & 0x80) { |
| found_header = 1; |
| usbvision->last_isoc_frame_num = -1; /* do not check for lost frames this time */ |
| usbvision_unrequest_intra(usbvision); |
| break; |
| } |
| } else { |
| found_header = 1; |
| break; |
| } |
| } |
| |
| if (found_header) { |
| frame->frmwidth = frame->isoc_header.frame_width * usbvision->stretch_width; |
| frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height; |
| frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth) >> 3; |
| } else { /* no header found */ |
| PDEBUG(DBG_HEADER, "skipping scratch data, no header"); |
| scratch_reset(usbvision); |
| return parse_state_end_parse; |
| } |
| |
| /* found header */ |
| if (frame->isoc_header.data_format == ISOC_MODE_COMPRESS) { |
| /* check isoc_header.frame_num for lost frames */ |
| if (usbvision->last_isoc_frame_num >= 0) { |
| if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) { |
| /* unexpected frame drop: need to request new intra frame */ |
| PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isoc_header.frame_num); |
| usbvision_request_intra(usbvision); |
| return parse_state_next_frame; |
| } |
| } |
| usbvision->last_isoc_frame_num = frame->isoc_header.frame_num; |
| } |
| usbvision->header_count++; |
| frame->scanstate = scan_state_lines; |
| frame->curline = 0; |
| |
| return parse_state_continue; |
| } |
| |
| static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvision, |
| long *pcopylen) |
| { |
| volatile struct usbvision_frame *frame; |
| unsigned char *f; |
| int len; |
| int i; |
| unsigned char yuyv[4] = { 180, 128, 10, 128 }; /* YUV components */ |
| unsigned char rv, gv, bv; /* RGB components */ |
| int clipmask_index, bytes_per_pixel; |
| int stretch_bytes, clipmask_add; |
| |
| frame = usbvision->cur_frame; |
| f = frame->data + (frame->v4l2_linesize * frame->curline); |
| |
| /* Make sure there's enough data for the entire line */ |
| len = (frame->isoc_header.frame_width * 2) + 5; |
| if (scratch_len(usbvision) < len) { |
| PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len); |
| return parse_state_out; |
| } |
| |
| if ((frame->curline + 1) >= frame->frmheight) |
| return parse_state_next_frame; |
| |
| bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; |
| stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; |
| clipmask_index = frame->curline * MAX_FRAME_WIDTH; |
| clipmask_add = usbvision->stretch_width; |
| |
| for (i = 0; i < frame->frmwidth; i += (2 * usbvision->stretch_width)) { |
| scratch_get(usbvision, &yuyv[0], 4); |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f++ = yuyv[0]; /* Y */ |
| *f++ = yuyv[3]; /* U */ |
| } else { |
| YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv); |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x07 & (gv >> 3)) | |
| (0xF8 & bv); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| f++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x03 & (gv >> 3)) | |
| (0x7C & (bv << 2)); |
| break; |
| } |
| } |
| clipmask_index += clipmask_add; |
| f += stretch_bytes; |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f++ = yuyv[2]; /* Y */ |
| *f++ = yuyv[1]; /* V */ |
| } else { |
| YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv); |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x07 & (gv >> 3)) | |
| (0xF8 & bv); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| f++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x03 & (gv >> 3)) | |
| (0x7C & (bv << 2)); |
| break; |
| } |
| } |
| clipmask_index += clipmask_add; |
| f += stretch_bytes; |
| } |
| |
| frame->curline += usbvision->stretch_height; |
| *pcopylen += frame->v4l2_linesize * usbvision->stretch_height; |
| |
| if (frame->curline >= frame->frmheight) |
| return parse_state_next_frame; |
| return parse_state_continue; |
| } |
| |
| /* The decompression routine */ |
| static int usbvision_decompress(struct usb_usbvision *usbvision, unsigned char *compressed, |
| unsigned char *decompressed, int *start_pos, |
| int *block_typestart_pos, int len) |
| { |
| int rest_pixel, idx, pos, extra_pos, block_len, block_type_pos, block_type_len; |
| unsigned char block_byte, block_code, block_type, block_type_byte, integrator; |
| |
| integrator = 0; |
| pos = *start_pos; |
| block_type_pos = *block_typestart_pos; |
| extra_pos = pos; |
| block_len = 0; |
| block_byte = 0; |
| block_code = 0; |
| block_type = 0; |
| block_type_byte = 0; |
| block_type_len = 0; |
| rest_pixel = len; |
| |
| for (idx = 0; idx < len; idx++) { |
| if (block_len == 0) { |
| if (block_type_len == 0) { |
| block_type_byte = compressed[block_type_pos]; |
| block_type_pos++; |
| block_type_len = 4; |
| } |
| block_type = (block_type_byte & 0xC0) >> 6; |
| |
| /* statistic: */ |
| usbvision->compr_block_types[block_type]++; |
| |
| pos = extra_pos; |
| if (block_type == 0) { |
| if (rest_pixel >= 24) { |
| idx += 23; |
| rest_pixel -= 24; |
| integrator = decompressed[idx]; |
| } else { |
| idx += rest_pixel - 1; |
| rest_pixel = 0; |
| } |
| } else { |
| block_code = compressed[pos]; |
| pos++; |
| if (rest_pixel >= 24) |
| block_len = 24; |
| else |
| block_len = rest_pixel; |
| rest_pixel -= block_len; |
| extra_pos = pos + (block_len / 4); |
| } |
| block_type_byte <<= 2; |
| block_type_len -= 1; |
| } |
| if (block_len > 0) { |
| if ((block_len % 4) == 0) { |
| block_byte = compressed[pos]; |
| pos++; |
| } |
| if (block_type == 1) /* inter Block */ |
| integrator = decompressed[idx]; |
| switch (block_byte & 0xC0) { |
| case 0x03 << 6: |
| integrator += compressed[extra_pos]; |
| extra_pos++; |
| break; |
| case 0x02 << 6: |
| integrator += block_code; |
| break; |
| case 0x00: |
| integrator -= block_code; |
| break; |
| } |
| decompressed[idx] = integrator; |
| block_byte <<= 2; |
| block_len -= 1; |
| } |
| } |
| *start_pos = extra_pos; |
| *block_typestart_pos = block_type_pos; |
| return idx; |
| } |
| |
| |
| /* |
| * usbvision_parse_compress() |
| * |
| * Parse compressed frame from the scratch buffer, put |
| * decoded RGB value into the current frame buffer and add the written |
| * number of bytes (RGB) to the *pcopylen. |
| * |
| */ |
| static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision, |
| long *pcopylen) |
| { |
| #define USBVISION_STRIP_MAGIC 0x5A |
| #define USBVISION_STRIP_LEN_MAX 400 |
| #define USBVISION_STRIP_HEADER_LEN 3 |
| |
| struct usbvision_frame *frame; |
| unsigned char *f, *u = NULL, *v = NULL; |
| unsigned char strip_data[USBVISION_STRIP_LEN_MAX]; |
| unsigned char strip_header[USBVISION_STRIP_HEADER_LEN]; |
| int idx, idx_end, strip_len, strip_ptr, startblock_pos, block_pos, block_type_pos; |
| int clipmask_index; |
| int image_size; |
| unsigned char rv, gv, bv; |
| static unsigned char *Y, *U, *V; |
| |
| frame = usbvision->cur_frame; |
| image_size = frame->frmwidth * frame->frmheight; |
| if ((frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) || |
| (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)) { /* this is a planar format */ |
| /* ... v4l2_linesize not used here. */ |
| f = frame->data + (frame->width * frame->curline); |
| } else |
| f = frame->data + (frame->v4l2_linesize * frame->curline); |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { /* initialise u and v pointers */ |
| /* get base of u and b planes add halfoffset */ |
| u = frame->data |
| + image_size |
| + (frame->frmwidth >> 1) * frame->curline; |
| v = u + (image_size >> 1); |
| } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) { |
| v = frame->data + image_size + ((frame->curline * (frame->width)) >> 2); |
| u = v + (image_size >> 2); |
| } |
| |
| if (frame->curline == 0) |
| usbvision_adjust_compression(usbvision); |
| |
| if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) |
| return parse_state_out; |
| |
| /* get strip header without changing the scratch_read_ptr */ |
| scratch_set_extra_ptr(usbvision, &strip_ptr, 0); |
| scratch_get_extra(usbvision, &strip_header[0], &strip_ptr, |
| USBVISION_STRIP_HEADER_LEN); |
| |
| if (strip_header[0] != USBVISION_STRIP_MAGIC) { |
| /* wrong strip magic */ |
| usbvision->strip_magic_errors++; |
| return parse_state_next_frame; |
| } |
| |
| if (frame->curline != (int)strip_header[2]) { |
| /* line number mismatch error */ |
| usbvision->strip_line_number_errors++; |
| } |
| |
| strip_len = 2 * (unsigned int)strip_header[1]; |
| if (strip_len > USBVISION_STRIP_LEN_MAX) { |
| /* strip overrun */ |
| /* I think this never happens */ |
| usbvision_request_intra(usbvision); |
| } |
| |
| if (scratch_len(usbvision) < strip_len) { |
| /* there is not enough data for the strip */ |
| return parse_state_out; |
| } |
| |
| if (usbvision->intra_frame_buffer) { |
| Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline; |
| U = usbvision->intra_frame_buffer + image_size + (frame->frmwidth / 2) * (frame->curline / 2); |
| V = usbvision->intra_frame_buffer + image_size / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2); |
| } else { |
| return parse_state_next_frame; |
| } |
| |
| clipmask_index = frame->curline * MAX_FRAME_WIDTH; |
| |
| scratch_get(usbvision, strip_data, strip_len); |
| |
| idx_end = frame->frmwidth; |
| block_type_pos = USBVISION_STRIP_HEADER_LEN; |
| startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2; |
| block_pos = startblock_pos; |
| |
| usbvision->block_pos = block_pos; |
| |
| usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end); |
| if (strip_len > usbvision->max_strip_len) |
| usbvision->max_strip_len = strip_len; |
| |
| if (frame->curline % 2) |
| usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end / 2); |
| else |
| usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end / 2); |
| |
| if (block_pos > usbvision->comprblock_pos) |
| usbvision->comprblock_pos = block_pos; |
| if (block_pos > strip_len) |
| usbvision->strip_len_errors++; |
| |
| for (idx = 0; idx < idx_end; idx++) { |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f++ = Y[idx]; |
| *f++ = idx & 0x01 ? U[idx / 2] : V[idx / 2]; |
| } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) { |
| *f++ = Y[idx]; |
| if (idx & 0x01) |
| *u++ = U[idx >> 1]; |
| else |
| *v++ = V[idx >> 1]; |
| } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) { |
| *f++ = Y[idx]; |
| if (!((idx & 0x01) | (frame->curline & 0x01))) { |
| /* only need do this for 1 in 4 pixels */ |
| /* intraframe buffer is YUV420 format */ |
| *u++ = U[idx >> 1]; |
| *v++ = V[idx >> 1]; |
| } |
| } else { |
| YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx / 2], V[idx / 2], rv, gv, bv); |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_GREY: |
| *f++ = Y[idx]; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x03 & (gv >> 3)) | |
| (0x7C & (bv << 2)); |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| *f++ = (0x1F & rv) | |
| (0xE0 & (gv << 5)); |
| *f++ = (0x07 & (gv >> 3)) | |
| (0xF8 & bv); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f++ = rv; |
| *f++ = gv; |
| *f++ = bv; |
| f++; |
| break; |
| } |
| } |
| clipmask_index++; |
| } |
| /* Deal with non-integer no. of bytes for YUV420P */ |
| if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420) |
| *pcopylen += frame->v4l2_linesize; |
| else |
| *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1; |
| |
| frame->curline += 1; |
| |
| if (frame->curline >= frame->frmheight) |
| return parse_state_next_frame; |
| return parse_state_continue; |
| |
| } |
| |
| |
| /* |
| * usbvision_parse_lines_420() |
| * |
| * Parse two lines from the scratch buffer, put |
| * decoded RGB value into the current frame buffer and add the written |
| * number of bytes (RGB) to the *pcopylen. |
| * |
| */ |
| static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvision, |
| long *pcopylen) |
| { |
| struct usbvision_frame *frame; |
| unsigned char *f_even = NULL, *f_odd = NULL; |
| unsigned int pixel_per_line, block; |
| int pixel, block_split; |
| int y_ptr, u_ptr, v_ptr, y_odd_offset; |
| const int y_block_size = 128; |
| const int uv_block_size = 64; |
| const int sub_block_size = 32; |
| const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4; |
| const int uv_step[] = { 0, 0, 0, 4 }, uv_step_size = 4; |
| unsigned char y[2], u, v; /* YUV components */ |
| int y_, u_, v_, vb, uvg, ur; |
| int r_, g_, b_; /* RGB components */ |
| unsigned char g; |
| int clipmask_even_index, clipmask_odd_index, bytes_per_pixel; |
| int clipmask_add, stretch_bytes; |
| |
| frame = usbvision->cur_frame; |
| f_even = frame->data + (frame->v4l2_linesize * frame->curline); |
| f_odd = f_even + frame->v4l2_linesize * usbvision->stretch_height; |
| |
| /* Make sure there's enough data for the entire line */ |
| /* In this mode usbvision transfer 3 bytes for every 2 pixels */ |
| /* I need two lines to decode the color */ |
| bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; |
| stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; |
| clipmask_even_index = frame->curline * MAX_FRAME_WIDTH; |
| clipmask_odd_index = clipmask_even_index + MAX_FRAME_WIDTH; |
| clipmask_add = usbvision->stretch_width; |
| pixel_per_line = frame->isoc_header.frame_width; |
| |
| if (scratch_len(usbvision) < (int)pixel_per_line * 3) { |
| /* printk(KERN_DEBUG "out of data, need %d\n", len); */ |
| return parse_state_out; |
| } |
| |
| if ((frame->curline + 1) >= frame->frmheight) |
| return parse_state_next_frame; |
| |
| block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks splitted into different lines? */ |
| |
| y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size) |
| + block_split * uv_block_size; |
| |
| scratch_set_extra_ptr(usbvision, &y_ptr, y_odd_offset); |
| scratch_set_extra_ptr(usbvision, &u_ptr, y_block_size); |
| scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset |
| + (4 - block_split) * sub_block_size); |
| |
| for (block = 0; block < (pixel_per_line / sub_block_size); block++) { |
| for (pixel = 0; pixel < sub_block_size; pixel += 2) { |
| scratch_get(usbvision, &y[0], 2); |
| scratch_get_extra(usbvision, &u, &u_ptr, 1); |
| scratch_get_extra(usbvision, &v, &v_ptr, 1); |
| |
| /* I don't use the YUV_TO_RGB macro for better performance */ |
| v_ = v - 128; |
| u_ = u - 128; |
| vb = 132252 * v_; |
| uvg = -53281 * u_ - 25625 * v_; |
| ur = 104595 * u_; |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f_even++ = y[0]; |
| *f_even++ = v; |
| } else { |
| y_ = 76284 * (y[0] - 16); |
| |
| b_ = (y_ + vb) >> 16; |
| g_ = (y_ + uvg) >> 16; |
| r_ = (y_ + ur) >> 16; |
| |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| g = LIMIT_RGB(g_); |
| *f_even++ = |
| (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_even++ = |
| (0x07 & (g >> 3)) | |
| (0xF8 & LIMIT_RGB(b_)); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f_even++ = LIMIT_RGB(r_); |
| *f_even++ = LIMIT_RGB(g_); |
| *f_even++ = LIMIT_RGB(b_); |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f_even++ = LIMIT_RGB(r_); |
| *f_even++ = LIMIT_RGB(g_); |
| *f_even++ = LIMIT_RGB(b_); |
| f_even++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| g = LIMIT_RGB(g_); |
| *f_even++ = (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_even++ = (0x03 & (g >> 3)) | |
| (0x7C & (LIMIT_RGB(b_) << 2)); |
| break; |
| } |
| } |
| clipmask_even_index += clipmask_add; |
| f_even += stretch_bytes; |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f_even++ = y[1]; |
| *f_even++ = u; |
| } else { |
| y_ = 76284 * (y[1] - 16); |
| |
| b_ = (y_ + vb) >> 16; |
| g_ = (y_ + uvg) >> 16; |
| r_ = (y_ + ur) >> 16; |
| |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| g = LIMIT_RGB(g_); |
| *f_even++ = |
| (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_even++ = |
| (0x07 & (g >> 3)) | |
| (0xF8 & LIMIT_RGB(b_)); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f_even++ = LIMIT_RGB(r_); |
| *f_even++ = LIMIT_RGB(g_); |
| *f_even++ = LIMIT_RGB(b_); |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f_even++ = LIMIT_RGB(r_); |
| *f_even++ = LIMIT_RGB(g_); |
| *f_even++ = LIMIT_RGB(b_); |
| f_even++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| g = LIMIT_RGB(g_); |
| *f_even++ = (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_even++ = (0x03 & (g >> 3)) | |
| (0x7C & (LIMIT_RGB(b_) << 2)); |
| break; |
| } |
| } |
| clipmask_even_index += clipmask_add; |
| f_even += stretch_bytes; |
| |
| scratch_get_extra(usbvision, &y[0], &y_ptr, 2); |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f_odd++ = y[0]; |
| *f_odd++ = v; |
| } else { |
| y_ = 76284 * (y[0] - 16); |
| |
| b_ = (y_ + vb) >> 16; |
| g_ = (y_ + uvg) >> 16; |
| r_ = (y_ + ur) >> 16; |
| |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| g = LIMIT_RGB(g_); |
| *f_odd++ = |
| (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_odd++ = |
| (0x07 & (g >> 3)) | |
| (0xF8 & LIMIT_RGB(b_)); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f_odd++ = LIMIT_RGB(r_); |
| *f_odd++ = LIMIT_RGB(g_); |
| *f_odd++ = LIMIT_RGB(b_); |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f_odd++ = LIMIT_RGB(r_); |
| *f_odd++ = LIMIT_RGB(g_); |
| *f_odd++ = LIMIT_RGB(b_); |
| f_odd++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| g = LIMIT_RGB(g_); |
| *f_odd++ = (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_odd++ = (0x03 & (g >> 3)) | |
| (0x7C & (LIMIT_RGB(b_) << 2)); |
| break; |
| } |
| } |
| clipmask_odd_index += clipmask_add; |
| f_odd += stretch_bytes; |
| |
| if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { |
| *f_odd++ = y[1]; |
| *f_odd++ = u; |
| } else { |
| y_ = 76284 * (y[1] - 16); |
| |
| b_ = (y_ + vb) >> 16; |
| g_ = (y_ + uvg) >> 16; |
| r_ = (y_ + ur) >> 16; |
| |
| switch (frame->v4l2_format.format) { |
| case V4L2_PIX_FMT_RGB565: |
| g = LIMIT_RGB(g_); |
| *f_odd++ = |
| (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_odd++ = |
| (0x07 & (g >> 3)) | |
| (0xF8 & LIMIT_RGB(b_)); |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| *f_odd++ = LIMIT_RGB(r_); |
| *f_odd++ = LIMIT_RGB(g_); |
| *f_odd++ = LIMIT_RGB(b_); |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| *f_odd++ = LIMIT_RGB(r_); |
| *f_odd++ = LIMIT_RGB(g_); |
| *f_odd++ = LIMIT_RGB(b_); |
| f_odd++; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| g = LIMIT_RGB(g_); |
| *f_odd++ = (0x1F & LIMIT_RGB(r_)) | |
| (0xE0 & (g << 5)); |
| *f_odd++ = (0x03 & (g >> 3)) | |
| (0x7C & (LIMIT_RGB(b_) << 2)); |
| break; |
| } |
| } |
| clipmask_odd_index += clipmask_add; |
| f_odd += stretch_bytes; |
| } |
| |
| scratch_rm_old(usbvision, y_step[block % y_step_size] * sub_block_size); |
| scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size] |
| * sub_block_size); |
| scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size] |
| * sub_block_size); |
| scratch_inc_extra_ptr(&v_ptr, uv_step[(block + 2 * block_split) % uv_step_size] |
| * sub_block_size); |
| } |
| |
| scratch_rm_old(usbvision, pixel_per_line * 3 / 2 |
| + block_split * sub_block_size); |
| |
| frame->curline += 2 * usbvision->stretch_height; |
| *pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height; |
| |
| if (frame->curline >= frame->frmheight) |
| return parse_state_next_frame; |
| return parse_state_continue; |
| } |
| |
| /* |
| * usbvision_parse_data() |
| * |
| * Generic routine to parse the scratch buffer. It employs either |
| * usbvision_find_header() or usbvision_parse_lines() to do most |
| * of work. |
| * |
| */ |
| static void usbvision_parse_data(struct usb_usbvision *usbvision) |
| { |
| struct usbvision_frame *frame; |
| enum parse_state newstate; |
| long copylen = 0; |
| unsigned long lock_flags; |
| |
| frame = usbvision->cur_frame; |
| |
| PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision)); |
| |
| while (1) { |
| newstate = parse_state_out; |
| if (scratch_len(usbvision)) { |
| if (frame->scanstate == scan_state_scanning) { |
| newstate = usbvision_find_header(usbvision); |
| } else if (frame->scanstate == scan_state_lines) { |
| if (usbvision->isoc_mode == ISOC_MODE_YUV420) |
| newstate = usbvision_parse_lines_420(usbvision, ©len); |
| else if (usbvision->isoc_mode == ISOC_MODE_YUV422) |
| newstate = usbvision_parse_lines_422(usbvision, ©len); |
| else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) |
| newstate = usbvision_parse_compress(usbvision, ©len); |
| } |
| } |
| if (newstate == parse_state_continue) |
| continue; |
| if ((newstate == parse_state_next_frame) || (newstate == parse_state_out)) |
| break; |
| return; /* parse_state_end_parse */ |
| } |
| |
| if (newstate == parse_state_next_frame) { |
| frame->grabstate = frame_state_done; |
| v4l2_get_timestamp(&(frame->timestamp)); |
| frame->sequence = usbvision->frame_num; |
| |
| spin_lock_irqsave(&usbvision->queue_lock, lock_flags); |
| list_move_tail(&(frame->frame), &usbvision->outqueue); |
| usbvision->cur_frame = NULL; |
| spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); |
| |
| usbvision->frame_num++; |
| |
| /* This will cause the process to request another frame. */ |
| if (waitqueue_active(&usbvision->wait_frame)) { |
| PDEBUG(DBG_PARSE, "Wake up !"); |
| wake_up_interruptible(&usbvision->wait_frame); |
| } |
| } else { |
| frame->grabstate = frame_state_grabbing; |
| } |
| |
| /* Update the frame's uncompressed length. */ |
| frame->scanlength += copylen; |
| } |
| |
| |
| /* |
| * Make all of the blocks of data contiguous |
| */ |
| static int usbvision_compress_isochronous(struct usb_usbvision *usbvision, |
| struct urb *urb) |
| { |
| unsigned char *packet_data; |
| int i, totlen = 0; |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| int packet_len = urb->iso_frame_desc[i].actual_length; |
| int packet_stat = urb->iso_frame_desc[i].status; |
| |
| packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset; |
| |
| /* Detect and ignore errored packets */ |
| if (packet_stat) { /* packet_stat != 0 ????????????? */ |
| PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat); |
| usbvision->isoc_err_count++; |
| continue; |
| } |
| |
| /* Detect and ignore empty packets */ |
| if (packet_len < 0) { |
| PDEBUG(DBG_ISOC, "error packet [%d]", i); |
| usbvision->isoc_skip_count++; |
| continue; |
| } else if (packet_len == 0) { /* Frame end ????? */ |
| PDEBUG(DBG_ISOC, "null packet [%d]", i); |
| usbvision->isocstate = isoc_state_no_frame; |
| usbvision->isoc_skip_count++; |
| continue; |
| } else if (packet_len > usbvision->isoc_packet_size) { |
| PDEBUG(DBG_ISOC, "packet[%d] > isoc_packet_size", i); |
| usbvision->isoc_skip_count++; |
| continue; |
| } |
| |
| PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len); |
| |
| if (usbvision->isocstate == isoc_state_no_frame) { /* new frame begins */ |
| usbvision->isocstate = isoc_state_in_frame; |
| scratch_mark_header(usbvision); |
| usbvision_measure_bandwidth(usbvision); |
| PDEBUG(DBG_ISOC, "packet with header"); |
| } |
| |
| /* |
| * If usbvision continues to feed us with data but there is no |
| * consumption (if, for example, V4L client fell asleep) we |
| * may overflow the buffer. We have to move old data over to |
| * free room for new data. This is bad for old data. If we |
| * just drop new data then it's bad for new data... choose |
| * your favorite evil here. |
| */ |
| if (scratch_free(usbvision) < packet_len) { |
| usbvision->scratch_ovf_count++; |
| PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d", |
| scratch_len(usbvision), packet_len); |
| scratch_rm_old(usbvision, packet_len - scratch_free(usbvision)); |
| } |
| |
| /* Now we know that there is enough room in scratch buffer */ |
| scratch_put(usbvision, packet_data, packet_len); |
| totlen += packet_len; |
| usbvision->isoc_data_count += packet_len; |
| usbvision->isoc_packet_count++; |
| } |
| #if ENABLE_HEXDUMP |
| if (totlen > 0) { |
| static int foo; |
| |
| if (foo < 1) { |
| printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen); |
| usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen); |
| ++foo; |
| } |
| } |
| #endif |
| return totlen; |
| } |
| |
| static void usbvision_isoc_irq(struct urb *urb) |
| { |
| int err_code = 0; |
| int len; |
| struct usb_usbvision *usbvision = urb->context; |
| int i; |
| unsigned long start_time = jiffies; |
| struct usbvision_frame **f; |
| |
| /* We don't want to do anything if we are about to be removed! */ |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return; |
| |
| /* any urb with wrong status is ignored without acknowledgement */ |
| if (urb->status == -ENOENT) |
| return; |
| |
| f = &usbvision->cur_frame; |
| |
| /* Manage streaming interruption */ |
| if (usbvision->streaming == stream_interrupt) { |
| usbvision->streaming = stream_idle; |
| if ((*f)) { |
| (*f)->grabstate = frame_state_ready; |
| (*f)->scanstate = scan_state_scanning; |
| } |
| PDEBUG(DBG_IRQ, "stream interrupted"); |
| wake_up_interruptible(&usbvision->wait_stream); |
| } |
| |
| /* Copy the data received into our scratch buffer */ |
| len = usbvision_compress_isochronous(usbvision, urb); |
| |
| usbvision->isoc_urb_count++; |
| usbvision->urb_length = len; |
| |
| if (usbvision->streaming == stream_on) { |
| /* If we collected enough data let's parse! */ |
| if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH && |
| !list_empty(&(usbvision->inqueue))) { |
| if (!(*f)) { |
| (*f) = list_entry(usbvision->inqueue.next, |
| struct usbvision_frame, |
| frame); |
| } |
| usbvision_parse_data(usbvision); |
| } else { |
| /* If we don't have a frame |
| we're current working on, complain */ |
| PDEBUG(DBG_IRQ, |
| "received data, but no one needs it"); |
| scratch_reset(usbvision); |
| } |
| } else { |
| PDEBUG(DBG_IRQ, "received data, but no one needs it"); |
| scratch_reset(usbvision); |
| } |
| |
| usbvision->time_in_irq += jiffies - start_time; |
| |
| for (i = 0; i < USBVISION_URB_FRAMES; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| urb->iso_frame_desc[i].actual_length = 0; |
| } |
| |
| urb->status = 0; |
| urb->dev = usbvision->dev; |
| err_code = usb_submit_urb(urb, GFP_ATOMIC); |
| |
| if (err_code) { |
| dev_err(&usbvision->dev->dev, |
| "%s: usb_submit_urb failed: error %d\n", |
| __func__, err_code); |
| } |
| |
| return; |
| } |
| |
| /*************************************/ |
| /* Low level usbvision access functions */ |
| /*************************************/ |
| |
| /* |
| * usbvision_read_reg() |
| * |
| * return < 0 -> Error |
| * >= 0 -> Data |
| */ |
| |
| int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg) |
| { |
| int err_code = 0; |
| unsigned char *buffer = usbvision->ctrl_urb_buffer; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return -1; |
| |
| err_code = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, |
| 0, (__u16) reg, buffer, 1, HZ); |
| |
| if (err_code < 0) { |
| dev_err(&usbvision->dev->dev, |
| "%s: failed: error %d\n", __func__, err_code); |
| return err_code; |
| } |
| return buffer[0]; |
| } |
| |
| /* |
| * usbvision_write_reg() |
| * |
| * return 1 -> Reg written |
| * 0 -> usbvision is not yet ready |
| * -1 -> Something went wrong |
| */ |
| |
| int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, |
| unsigned char value) |
| { |
| int err_code = 0; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| usbvision->ctrl_urb_buffer[0] = value; |
| err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, (__u16) reg, |
| usbvision->ctrl_urb_buffer, 1, HZ); |
| |
| if (err_code < 0) { |
| dev_err(&usbvision->dev->dev, |
| "%s: failed: error %d\n", __func__, err_code); |
| } |
| return err_code; |
| } |
| |
| |
| static void usbvision_ctrl_urb_complete(struct urb *urb) |
| { |
| struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context; |
| |
| PDEBUG(DBG_IRQ, ""); |
| usbvision->ctrl_urb_busy = 0; |
| if (waitqueue_active(&usbvision->ctrl_urb_wq)) |
| wake_up_interruptible(&usbvision->ctrl_urb_wq); |
| } |
| |
| |
| static int usbvision_write_reg_irq(struct usb_usbvision *usbvision, int address, |
| unsigned char *data, int len) |
| { |
| int err_code = 0; |
| |
| PDEBUG(DBG_IRQ, ""); |
| if (len > 8) |
| return -EFAULT; |
| if (usbvision->ctrl_urb_busy) |
| return -EBUSY; |
| usbvision->ctrl_urb_busy = 1; |
| |
| usbvision->ctrl_urb_setup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT; |
| usbvision->ctrl_urb_setup.bRequest = USBVISION_OP_CODE; |
| usbvision->ctrl_urb_setup.wValue = 0; |
| usbvision->ctrl_urb_setup.wIndex = cpu_to_le16(address); |
| usbvision->ctrl_urb_setup.wLength = cpu_to_le16(len); |
| usb_fill_control_urb(usbvision->ctrl_urb, usbvision->dev, |
| usb_sndctrlpipe(usbvision->dev, 1), |
| (unsigned char *)&usbvision->ctrl_urb_setup, |
| (void *)usbvision->ctrl_urb_buffer, len, |
| usbvision_ctrl_urb_complete, |
| (void *)usbvision); |
| |
| memcpy(usbvision->ctrl_urb_buffer, data, len); |
| |
| err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC); |
| if (err_code < 0) { |
| /* error in usb_submit_urb() */ |
| usbvision->ctrl_urb_busy = 0; |
| } |
| PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code); |
| return err_code; |
| } |
| |
| |
| static int usbvision_init_compression(struct usb_usbvision *usbvision) |
| { |
| usbvision->last_isoc_frame_num = -1; |
| usbvision->isoc_data_count = 0; |
| usbvision->isoc_packet_count = 0; |
| usbvision->isoc_skip_count = 0; |
| usbvision->compr_level = 50; |
| usbvision->last_compr_level = -1; |
| usbvision->isoc_urb_count = 0; |
| usbvision->request_intra = 1; |
| usbvision->isoc_measure_bandwidth_count = 0; |
| |
| return 0; |
| } |
| |
| /* this function measures the used bandwidth since last call |
| * return: 0 : no error |
| * sets used_bandwidth to 1-100 : 1-100% of full bandwidth resp. to isoc_packet_size |
| */ |
| static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision) |
| { |
| if (usbvision->isoc_measure_bandwidth_count < 2) { /* this gives an average bandwidth of 3 frames */ |
| usbvision->isoc_measure_bandwidth_count++; |
| return 0; |
| } |
| if ((usbvision->isoc_packet_size > 0) && (usbvision->isoc_packet_count > 0)) { |
| usbvision->used_bandwidth = usbvision->isoc_data_count / |
| (usbvision->isoc_packet_count + usbvision->isoc_skip_count) * |
| 100 / usbvision->isoc_packet_size; |
| } |
| usbvision->isoc_measure_bandwidth_count = 0; |
| usbvision->isoc_data_count = 0; |
| usbvision->isoc_packet_count = 0; |
| usbvision->isoc_skip_count = 0; |
| return 0; |
| } |
| |
| static int usbvision_adjust_compression(struct usb_usbvision *usbvision) |
| { |
| int err_code = 0; |
| unsigned char buffer[6]; |
| |
| PDEBUG(DBG_IRQ, ""); |
| if ((adjust_compression) && (usbvision->used_bandwidth > 0)) { |
| usbvision->compr_level += (usbvision->used_bandwidth - 90) / 2; |
| RESTRICT_TO_RANGE(usbvision->compr_level, 0, 100); |
| if (usbvision->compr_level != usbvision->last_compr_level) { |
| int distortion; |
| |
| if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) { |
| buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100); /* PCM Threshold 1 */ |
| buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100); /* PCM Threshold 2 */ |
| distortion = 7 + 248 * usbvision->compr_level / 100; |
| buffer[2] = (unsigned char)(distortion & 0xFF); /* Average distortion Threshold (inter) */ |
| buffer[3] = (unsigned char)(distortion & 0xFF); /* Average distortion Threshold (intra) */ |
| distortion = 1 + 42 * usbvision->compr_level / 100; |
| buffer[4] = (unsigned char)(distortion & 0xFF); /* Maximum distortion Threshold (inter) */ |
| buffer[5] = (unsigned char)(distortion & 0xFF); /* Maximum distortion Threshold (intra) */ |
| } else { /* BRIDGE_NT1003 */ |
| buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100); /* PCM threshold 1 */ |
| buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100); /* PCM threshold 2 */ |
| distortion = 2 + 253 * usbvision->compr_level / 100; |
| buffer[2] = (unsigned char)(distortion & 0xFF); /* distortion threshold bit0-7 */ |
| buffer[3] = 0; /* (unsigned char)((distortion >> 8) & 0x0F); distortion threshold bit 8-11 */ |
| distortion = 0 + 43 * usbvision->compr_level / 100; |
| buffer[4] = (unsigned char)(distortion & 0xFF); /* maximum distortion bit0-7 */ |
| buffer[5] = 0; /* (unsigned char)((distortion >> 8) & 0x01); maximum distortion bit 8 */ |
| } |
| err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6); |
| if (err_code == 0) { |
| PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0], |
| buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]); |
| usbvision->last_compr_level = usbvision->compr_level; |
| } |
| } |
| } |
| return err_code; |
| } |
| |
| static int usbvision_request_intra(struct usb_usbvision *usbvision) |
| { |
| unsigned char buffer[1]; |
| |
| PDEBUG(DBG_IRQ, ""); |
| usbvision->request_intra = 1; |
| buffer[0] = 1; |
| usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); |
| return 0; |
| } |
| |
| static int usbvision_unrequest_intra(struct usb_usbvision *usbvision) |
| { |
| unsigned char buffer[1]; |
| |
| PDEBUG(DBG_IRQ, ""); |
| usbvision->request_intra = 0; |
| buffer[0] = 0; |
| usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); |
| return 0; |
| } |
| |
| /******************************* |
| * usbvision utility functions |
| *******************************/ |
| |
| int usbvision_power_off(struct usb_usbvision *usbvision) |
| { |
| int err_code = 0; |
| |
| PDEBUG(DBG_FUNC, ""); |
| |
| err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); |
| if (err_code == 1) |
| usbvision->power = 0; |
| PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code != 1) ? "ERROR" : "power is off", err_code); |
| return err_code; |
| } |
| |
| /* configure webcam image sensor using the serial port */ |
| static int usbvision_init_webcam(struct usb_usbvision *usbvision) |
| { |
| int rc; |
| int i; |
| static char init_values[38][3] = { |
| { 0x04, 0x12, 0x08 }, { 0x05, 0xff, 0xc8 }, { 0x06, 0x18, 0x07 }, { 0x07, 0x90, 0x00 }, |
| { 0x09, 0x00, 0x00 }, { 0x0a, 0x00, 0x00 }, { 0x0b, 0x08, 0x00 }, { 0x0d, 0xcc, 0xcc }, |
| { 0x0e, 0x13, 0x14 }, { 0x10, 0x9b, 0x83 }, { 0x11, 0x5a, 0x3f }, { 0x12, 0xe4, 0x73 }, |
| { 0x13, 0x88, 0x84 }, { 0x14, 0x89, 0x80 }, { 0x15, 0x00, 0x20 }, { 0x16, 0x00, 0x00 }, |
| { 0x17, 0xff, 0xa0 }, { 0x18, 0x6b, 0x20 }, { 0x19, 0x22, 0x40 }, { 0x1a, 0x10, 0x07 }, |
| { 0x1b, 0x00, 0x47 }, { 0x1c, 0x03, 0xe0 }, { 0x1d, 0x00, 0x00 }, { 0x1e, 0x00, 0x00 }, |
| { 0x1f, 0x00, 0x00 }, { 0x20, 0x00, 0x00 }, { 0x21, 0x00, 0x00 }, { 0x22, 0x00, 0x00 }, |
| { 0x23, 0x00, 0x00 }, { 0x24, 0x00, 0x00 }, { 0x25, 0x00, 0x00 }, { 0x26, 0x00, 0x00 }, |
| { 0x27, 0x00, 0x00 }, { 0x28, 0x00, 0x00 }, { 0x29, 0x00, 0x00 }, { 0x08, 0x80, 0x60 }, |
| { 0x0f, 0x2d, 0x24 }, { 0x0c, 0x80, 0x80 } |
| }; |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| |
| /* the only difference between PAL and NTSC init_values */ |
| if (usbvision_device_data[usbvision->dev_model].video_norm == V4L2_STD_NTSC) |
| init_values[4][1] = 0x34; |
| |
| for (i = 0; i < sizeof(init_values) / 3; i++) { |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT); |
| memcpy(value, init_values[i], 3); |
| rc = usb_control_msg(usbvision->dev, |
| usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_SER_DAT1, value, |
| 3, HZ); |
| if (rc < 0) |
| return rc; |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SIO); |
| /* write 3 bytes to the serial port using SIO mode */ |
| usbvision_write_reg(usbvision, USBVISION_SER_CONT, 3 | 0x10); |
| usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, 0); |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT); |
| usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_IO_2); |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_CLK_OUT); |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_DAT_IO); |
| usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_CLK_OUT | USBVISION_DAT_IO); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * usbvision_set_video_format() |
| * |
| */ |
| static int usbvision_set_video_format(struct usb_usbvision *usbvision, int format) |
| { |
| static const char proc[] = "usbvision_set_video_format"; |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| int rc; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| PDEBUG(DBG_FUNC, "isoc_mode %#02x", format); |
| |
| if ((format != ISOC_MODE_YUV422) |
| && (format != ISOC_MODE_YUV420) |
| && (format != ISOC_MODE_COMPRESS)) { |
| printk(KERN_ERR "usbvision: unknown video format %02x, using default YUV420", |
| format); |
| format = ISOC_MODE_YUV420; |
| } |
| value[0] = 0x0A; /* TODO: See the effect of the filter */ |
| value[1] = format; /* Sets the VO_MODE register which follows FILT_CONT */ |
| rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_FILT_CONT, value, 2, HZ); |
| |
| if (rc < 0) { |
| printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - " |
| "reconnect or reload driver.\n", proc, rc); |
| } |
| usbvision->isoc_mode = format; |
| return rc; |
| } |
| |
| /* |
| * usbvision_set_output() |
| * |
| */ |
| |
| int usbvision_set_output(struct usb_usbvision *usbvision, int width, |
| int height) |
| { |
| int err_code = 0; |
| int usb_width, usb_height; |
| unsigned int frame_rate = 0, frame_drop = 0; |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| if (width > MAX_USB_WIDTH) { |
| usb_width = width / 2; |
| usbvision->stretch_width = 2; |
| } else { |
| usb_width = width; |
| usbvision->stretch_width = 1; |
| } |
| |
| if (height > MAX_USB_HEIGHT) { |
| usb_height = height / 2; |
| usbvision->stretch_height = 2; |
| } else { |
| usb_height = height; |
| usbvision->stretch_height = 1; |
| } |
| |
| RESTRICT_TO_RANGE(usb_width, MIN_FRAME_WIDTH, MAX_USB_WIDTH); |
| usb_width &= ~(MIN_FRAME_WIDTH-1); |
| RESTRICT_TO_RANGE(usb_height, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT); |
| usb_height &= ~(1); |
| |
| PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d", |
| usb_width, usb_height, width, height, |
| usbvision->stretch_width, usbvision->stretch_height); |
| |
| /* I'll not rewrite the same values */ |
| if ((usb_width != usbvision->curwidth) || (usb_height != usbvision->curheight)) { |
| value[0] = usb_width & 0xff; /* LSB */ |
| value[1] = (usb_width >> 8) & 0x03; /* MSB */ |
| value[2] = usb_height & 0xff; /* LSB */ |
| value[3] = (usb_height >> 8) & 0x03; /* MSB */ |
| |
| err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, |
| 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ); |
| |
| if (err_code < 0) { |
| dev_err(&usbvision->dev->dev, |
| "%s failed: error %d\n", __func__, err_code); |
| return err_code; |
| } |
| usbvision->curwidth = usbvision->stretch_width * usb_width; |
| usbvision->curheight = usbvision->stretch_height * usb_height; |
| } |
| |
| if (usbvision->isoc_mode == ISOC_MODE_YUV422) |
| frame_rate = (usbvision->isoc_packet_size * 1000) / (usb_width * usb_height * 2); |
| else if (usbvision->isoc_mode == ISOC_MODE_YUV420) |
| frame_rate = (usbvision->isoc_packet_size * 1000) / ((usb_width * usb_height * 12) / 8); |
| else |
| frame_rate = FRAMERATE_MAX; |
| |
| if (usbvision->tvnorm_id & V4L2_STD_625_50) |
| frame_drop = frame_rate * 32 / 25 - 1; |
| else if (usbvision->tvnorm_id & V4L2_STD_525_60) |
| frame_drop = frame_rate * 32 / 30 - 1; |
| |
| RESTRICT_TO_RANGE(frame_drop, FRAMERATE_MIN, FRAMERATE_MAX); |
| |
| PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop); |
| |
| frame_drop = FRAMERATE_MAX; /* We can allow the maximum here, because dropping is controlled */ |
| |
| if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { |
| if (usbvision_device_data[usbvision->dev_model].video_norm == V4L2_STD_PAL) |
| frame_drop = 25; |
| else |
| frame_drop = 30; |
| } |
| |
| /* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ... |
| => frame_skip = 4; |
| => frame_rate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25; |
| |
| frame_drop = 9; => frame_phase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ... |
| => frame_skip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ... |
| => frame_rate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125; |
| */ |
| err_code = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frame_drop); |
| return err_code; |
| } |
| |
| |
| /* |
| * usbvision_frames_alloc |
| * allocate the required frames |
| */ |
| int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames) |
| { |
| int i; |
| |
| /* needs to be page aligned cause the buffers can be mapped individually! */ |
| usbvision->max_frame_size = PAGE_ALIGN(usbvision->curwidth * |
| usbvision->curheight * |
| usbvision->palette.bytes_per_pixel); |
| |
| /* Try to do my best to allocate the frames the user want in the remaining memory */ |
| usbvision->num_frames = number_of_frames; |
| while (usbvision->num_frames > 0) { |
| usbvision->fbuf_size = usbvision->num_frames * usbvision->max_frame_size; |
| usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size); |
| if (usbvision->fbuf) |
| break; |
| usbvision->num_frames--; |
| } |
| |
| /* Allocate all buffers */ |
| for (i = 0; i < usbvision->num_frames; i++) { |
| usbvision->frame[i].index = i; |
| usbvision->frame[i].grabstate = frame_state_unused; |
| usbvision->frame[i].data = usbvision->fbuf + |
| i * usbvision->max_frame_size; |
| /* |
| * Set default sizes for read operation. |
| */ |
| usbvision->stretch_width = 1; |
| usbvision->stretch_height = 1; |
| usbvision->frame[i].width = usbvision->curwidth; |
| usbvision->frame[i].height = usbvision->curheight; |
| usbvision->frame[i].bytes_read = 0; |
| } |
| PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)", |
| usbvision->num_frames, usbvision->max_frame_size); |
| return usbvision->num_frames; |
| } |
| |
| /* |
| * usbvision_frames_free |
| * frees memory allocated for the frames |
| */ |
| void usbvision_frames_free(struct usb_usbvision *usbvision) |
| { |
| /* Have to free all that memory */ |
| PDEBUG(DBG_FUNC, "free %d frames", usbvision->num_frames); |
| |
| if (usbvision->fbuf != NULL) { |
| usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size); |
| usbvision->fbuf = NULL; |
| |
| usbvision->num_frames = 0; |
| } |
| } |
| /* |
| * usbvision_empty_framequeues() |
| * prepare queues for incoming and outgoing frames |
| */ |
| void usbvision_empty_framequeues(struct usb_usbvision *usbvision) |
| { |
| u32 i; |
| |
| INIT_LIST_HEAD(&(usbvision->inqueue)); |
| INIT_LIST_HEAD(&(usbvision->outqueue)); |
| |
| for (i = 0; i < USBVISION_NUMFRAMES; i++) { |
| usbvision->frame[i].grabstate = frame_state_unused; |
| usbvision->frame[i].bytes_read = 0; |
| } |
| } |
| |
| /* |
| * usbvision_stream_interrupt() |
| * stops streaming |
| */ |
| int usbvision_stream_interrupt(struct usb_usbvision *usbvision) |
| { |
| int ret = 0; |
| |
| /* stop reading from the device */ |
| |
| usbvision->streaming = stream_interrupt; |
| ret = wait_event_timeout(usbvision->wait_stream, |
| (usbvision->streaming == stream_idle), |
| msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES)); |
| return ret; |
| } |
| |
| /* |
| * usbvision_set_compress_params() |
| * |
| */ |
| |
| static int usbvision_set_compress_params(struct usb_usbvision *usbvision) |
| { |
| static const char proc[] = "usbvision_set_compresion_params: "; |
| int rc; |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| |
| value[0] = 0x0F; /* Intra-Compression cycle */ |
| value[1] = 0x01; /* Reg.45 one line per strip */ |
| value[2] = 0x00; /* Reg.46 Force intra mode on all new frames */ |
| value[3] = 0x00; /* Reg.47 FORCE_UP <- 0 normal operation (not force) */ |
| value[4] = 0xA2; /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */ |
| value[5] = 0x00; /* Reg.49 DVI_YUV This has nothing to do with compression */ |
| |
| /* catched values for NT1004 */ |
| /* value[0] = 0xFF; Never apply intra mode automatically */ |
| /* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */ |
| /* value[2] = 0x01; Force intra mode on all new frames */ |
| /* value[3] = 0x00; Strip size 400 Bytes; do not force up */ |
| /* value[4] = 0xA2; */ |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_INTRA_CYC, value, 5, HZ); |
| |
| if (rc < 0) { |
| printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " |
| "reconnect or reload driver.\n", proc, rc); |
| return rc; |
| } |
| |
| if (usbvision->bridge_type == BRIDGE_NT1004) { |
| value[0] = 20; /* PCM Threshold 1 */ |
| value[1] = 12; /* PCM Threshold 2 */ |
| value[2] = 255; /* Distortion Threshold inter */ |
| value[3] = 255; /* Distortion Threshold intra */ |
| value[4] = 43; /* Max Distortion inter */ |
| value[5] = 43; /* Max Distortion intra */ |
| } else { |
| value[0] = 20; /* PCM Threshold 1 */ |
| value[1] = 12; /* PCM Threshold 2 */ |
| value[2] = 255; /* Distortion Threshold d7-d0 */ |
| value[3] = 0; /* Distortion Threshold d11-d8 */ |
| value[4] = 43; /* Max Distortion d7-d0 */ |
| value[5] = 0; /* Max Distortion d8 */ |
| } |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_PCM_THR1, value, 6, HZ); |
| |
| if (rc < 0) { |
| printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " |
| "reconnect or reload driver.\n", proc, rc); |
| } |
| return rc; |
| } |
| |
| |
| /* |
| * usbvision_set_input() |
| * |
| * Set the input (saa711x, ...) size x y and other misc input params |
| * I've no idea if this parameters are right |
| * |
| */ |
| int usbvision_set_input(struct usb_usbvision *usbvision) |
| { |
| static const char proc[] = "usbvision_set_input: "; |
| int rc; |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| unsigned char dvi_yuv_value; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| /* Set input format expected from decoder*/ |
| if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) { |
| value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1; |
| } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) { |
| /* SAA7113 uses 8 bit output */ |
| value[0] = USBVISION_8_422_SYNC; |
| } else { |
| /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses |
| * as that is how saa7111 is configured */ |
| value[0] = USBVISION_16_422_SYNC; |
| /* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/ |
| } |
| |
| rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]); |
| if (rc < 0) { |
| printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " |
| "reconnect or reload driver.\n", proc, rc); |
| return rc; |
| } |
| |
| |
| if (usbvision->tvnorm_id & V4L2_STD_PAL) { |
| value[0] = 0xC0; |
| value[1] = 0x02; /* 0x02C0 -> 704 Input video line length */ |
| value[2] = 0x20; |
| value[3] = 0x01; /* 0x0120 -> 288 Input video n. of lines */ |
| value[4] = 0x60; |
| value[5] = 0x00; /* 0x0060 -> 96 Input video h offset */ |
| value[6] = 0x16; |
| value[7] = 0x00; /* 0x0016 -> 22 Input video v offset */ |
| } else if (usbvision->tvnorm_id & V4L2_STD_SECAM) { |
| value[0] = 0xC0; |
| value[1] = 0x02; /* 0x02C0 -> 704 Input video line length */ |
| value[2] = 0x20; |
| value[3] = 0x01; /* 0x0120 -> 288 Input video n. of lines */ |
| value[4] = 0x01; |
| value[5] = 0x00; /* 0x0001 -> 01 Input video h offset */ |
| value[6] = 0x01; |
| value[7] = 0x00; /* 0x0001 -> 01 Input video v offset */ |
| } else { /* V4L2_STD_NTSC */ |
| value[0] = 0xD0; |
| value[1] = 0x02; /* 0x02D0 -> 720 Input video line length */ |
| value[2] = 0xF0; |
| value[3] = 0x00; /* 0x00F0 -> 240 Input video number of lines */ |
| value[4] = 0x50; |
| value[5] = 0x00; /* 0x0050 -> 80 Input video h offset */ |
| value[6] = 0x10; |
| value[7] = 0x00; /* 0x0010 -> 16 Input video v offset */ |
| } |
| |
| /* webcam is only 480 pixels wide, both PAL and NTSC version */ |
| if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { |
| value[0] = 0xe0; |
| value[1] = 0x01; /* 0x01E0 -> 480 Input video line length */ |
| } |
| |
| if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) { |
| value[4] = usbvision_device_data[usbvision->dev_model].x_offset & 0xff; |
| value[5] = (usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8; |
| } |
| |
| if (adjust_x_offset != -1) { |
| value[4] = adjust_x_offset & 0xff; |
| value[5] = (adjust_x_offset & 0x0300) >> 8; |
| } |
| |
| if (usbvision_device_data[usbvision->dev_model].y_offset >= 0) { |
| value[6] = usbvision_device_data[usbvision->dev_model].y_offset & 0xff; |
| value[7] = (usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8; |
| } |
| |
| if (adjust_y_offset != -1) { |
| value[6] = adjust_y_offset & 0xff; |
| value[7] = (adjust_y_offset & 0x0300) >> 8; |
| } |
| |
| rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, /* USBVISION specific code */ |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_LXSIZE_I, value, 8, HZ); |
| if (rc < 0) { |
| printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " |
| "reconnect or reload driver.\n", proc, rc); |
| return rc; |
| } |
| |
| |
| dvi_yuv_value = 0x00; /* U comes after V, Ya comes after U/V, Yb comes after Yb */ |
| |
| if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override) { |
| dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv; |
| } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) { |
| /* This changes as the fine sync control changes. Further investigation necessary */ |
| dvi_yuv_value = 0x06; |
| } |
| |
| return usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value); |
| } |
| |
| |
| /* |
| * usbvision_set_dram_settings() |
| * |
| * Set the buffer address needed by the usbvision dram to operate |
| * This values has been taken with usbsnoop. |
| * |
| */ |
| |
| static int usbvision_set_dram_settings(struct usb_usbvision *usbvision) |
| { |
| unsigned char *value = usbvision->ctrl_urb_buffer; |
| int rc; |
| |
| if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) { |
| value[0] = 0x42; |
| value[1] = 0x71; |
| value[2] = 0xff; |
| value[3] = 0x00; |
| value[4] = 0x98; |
| value[5] = 0xe0; |
| value[6] = 0x71; |
| value[7] = 0xff; |
| /* UR: 0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) */ |
| /* FDL: 0x00000-0x0E099 = 57498 Words */ |
| /* VDW: 0x0E3FF-0x3FFFF */ |
| } else { |
| value[0] = 0x42; |
| value[1] = 0x00; |
| value[2] = 0xff; |
| value[3] = 0x00; |
| value[4] = 0x00; |
| value[5] = 0x00; |
| value[6] = 0x00; |
| value[7] = 0xff; |
| } |
| /* These are the values of the address of the video buffer, |
| * they have to be loaded into the USBVISION_DRM_PRM1-8 |
| * |
| * Start address of video output buffer for read: drm_prm1-2 -> 0x00000 |
| * End address of video output buffer for read: drm_prm1-3 -> 0x1ffff |
| * Start address of video frame delay buffer: drm_prm1-4 -> 0x20000 |
| * Only used in compressed mode |
| * End address of video frame delay buffer: drm_prm1-5-6 -> 0x3ffff |
| * Only used in compressed mode |
| * Start address of video output buffer for write: drm_prm1-7 -> 0x00000 |
| * End address of video output buffer for write: drm_prm1-8 -> 0x1ffff |
| */ |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return 0; |
| |
| rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), |
| USBVISION_OP_CODE, /* USBVISION specific code */ |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_ENDPOINT, 0, |
| (__u16) USBVISION_DRM_PRM1, value, 8, HZ); |
| |
| if (rc < 0) { |
| dev_err(&usbvision->dev->dev, "%s: ERROR=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| /* Restart the video buffer logic */ |
| rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR | |
| USBVISION_RES_FDL | USBVISION_RES_VDW); |
| if (rc < 0) |
| return rc; |
| rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00); |
| |
| return rc; |
| } |
| |
| /* |
| * () |
| * |
| * Power on the device, enables suspend-resume logic |
| * & reset the isoc End-Point |
| * |
| */ |
| |
| int usbvision_power_on(struct usb_usbvision *usbvision) |
| { |
| int err_code = 0; |
| |
| PDEBUG(DBG_FUNC, ""); |
| |
| usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); |
| usbvision_write_reg(usbvision, USBVISION_PWR_REG, |
| USBVISION_SSPND_EN | USBVISION_RES2); |
| |
| if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { |
| usbvision_write_reg(usbvision, USBVISION_VIN_REG1, |
| USBVISION_16_422_SYNC | USBVISION_HVALID_PO); |
| usbvision_write_reg(usbvision, USBVISION_VIN_REG2, |
| USBVISION_NOHVALID | USBVISION_KEEP_BLANK); |
| } |
| usbvision_write_reg(usbvision, USBVISION_PWR_REG, |
| USBVISION_SSPND_EN | USBVISION_PWR_VID); |
| mdelay(10); |
| err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, |
| USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2); |
| if (err_code == 1) |
| usbvision->power = 1; |
| PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code < 0) ? "ERROR" : "power is on", err_code); |
| return err_code; |
| } |
| |
| |
| /* |
| * usbvision_begin_streaming() |
| * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no |
| * idea about the rest |
| */ |
| int usbvision_begin_streaming(struct usb_usbvision *usbvision) |
| { |
| if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) |
| usbvision_init_compression(usbvision); |
| return usbvision_write_reg(usbvision, USBVISION_VIN_REG2, |
| USBVISION_NOHVALID | usbvision->vin_reg2_preset); |
| } |
| |
| /* |
| * usbvision_restart_isoc() |
| * Not sure yet if touching here PWR_REG make loose the config |
| */ |
| |
| int usbvision_restart_isoc(struct usb_usbvision *usbvision) |
| { |
| int ret; |
| |
| ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG, |
| USBVISION_SSPND_EN | USBVISION_PWR_VID); |
| if (ret < 0) |
| return ret; |
| ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG, |
| USBVISION_SSPND_EN | USBVISION_PWR_VID | |
| USBVISION_RES2); |
| if (ret < 0) |
| return ret; |
| ret = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, |
| USBVISION_KEEP_BLANK | USBVISION_NOHVALID | |
| usbvision->vin_reg2_preset); |
| if (ret < 0) |
| return ret; |
| |
| /* TODO: schedule timeout */ |
| while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1) |
| ; |
| |
| return 0; |
| } |
| |
| int usbvision_audio_off(struct usb_usbvision *usbvision) |
| { |
| if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) { |
| printk(KERN_ERR "usbvision_audio_off: can't write reg\n"); |
| return -1; |
| } |
| usbvision->audio_mute = 0; |
| usbvision->audio_channel = USBVISION_AUDIO_MUTE; |
| return 0; |
| } |
| |
| int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel) |
| { |
| if (!usbvision->audio_mute) { |
| if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, audio_channel) < 0) { |
| printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n"); |
| return -1; |
| } |
| } |
| usbvision->audio_channel = audio_channel; |
| return 0; |
| } |
| |
| int usbvision_setup(struct usb_usbvision *usbvision, int format) |
| { |
| if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) |
| usbvision_init_webcam(usbvision); |
| usbvision_set_video_format(usbvision, format); |
| usbvision_set_dram_settings(usbvision); |
| usbvision_set_compress_params(usbvision); |
| usbvision_set_input(usbvision); |
| usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT); |
| usbvision_restart_isoc(usbvision); |
| |
| /* cosas del PCM */ |
| return USBVISION_IS_OPERATIONAL(usbvision); |
| } |
| |
| int usbvision_set_alternate(struct usb_usbvision *dev) |
| { |
| int err_code, prev_alt = dev->iface_alt; |
| int i; |
| |
| dev->iface_alt = 0; |
| for (i = 0; i < dev->num_alt; i++) |
| if (dev->alt_max_pkt_size[i] > dev->alt_max_pkt_size[dev->iface_alt]) |
| dev->iface_alt = i; |
| |
| if (dev->iface_alt != prev_alt) { |
| dev->isoc_packet_size = dev->alt_max_pkt_size[dev->iface_alt]; |
| PDEBUG(DBG_FUNC, "setting alternate %d with max_packet_size=%u", |
| dev->iface_alt, dev->isoc_packet_size); |
| err_code = usb_set_interface(dev->dev, dev->iface, dev->iface_alt); |
| if (err_code < 0) { |
| dev_err(&dev->dev->dev, |
| "cannot change alternate number to %d (error=%i)\n", |
| dev->iface_alt, err_code); |
| return err_code; |
| } |
| } |
| |
| PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isoc_packet_size); |
| |
| return 0; |
| } |
| |
| /* |
| * usbvision_init_isoc() |
| * |
| */ |
| int usbvision_init_isoc(struct usb_usbvision *usbvision) |
| { |
| struct usb_device *dev = usbvision->dev; |
| int buf_idx, err_code, reg_value; |
| int sb_size; |
| |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) |
| return -EFAULT; |
| |
| usbvision->cur_frame = NULL; |
| scratch_reset(usbvision); |
| |
| /* Alternate interface 1 is is the biggest frame size */ |
| err_code = usbvision_set_alternate(usbvision); |
| if (err_code < 0) { |
| usbvision->last_error = err_code; |
| return -EBUSY; |
| } |
| sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size; |
| |
| reg_value = (16 - usbvision_read_reg(usbvision, |
| USBVISION_ALTER_REG)) & 0x0F; |
| |
| usbvision->usb_bandwidth = reg_value >> 1; |
| PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", |
| usbvision->usb_bandwidth); |
| |
| |
| |
| /* We double buffer the Iso lists */ |
| |
| for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { |
| int j, k; |
| struct urb *urb; |
| |
| urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); |
| if (urb == NULL) { |
| dev_err(&usbvision->dev->dev, |
| "%s: usb_alloc_urb() failed\n", __func__); |
| return -ENOMEM; |
| } |
| usbvision->sbuf[buf_idx].urb = urb; |
| usbvision->sbuf[buf_idx].data = |
| usb_alloc_coherent(usbvision->dev, |
| sb_size, |
| GFP_KERNEL, |
| &urb->transfer_dma); |
| urb->dev = dev; |
| urb->context = usbvision; |
| urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp); |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| urb->interval = 1; |
| urb->transfer_buffer = usbvision->sbuf[buf_idx].data; |
| urb->complete = usbvision_isoc_irq; |
| urb->number_of_packets = USBVISION_URB_FRAMES; |
| urb->transfer_buffer_length = |
| usbvision->isoc_packet_size * USBVISION_URB_FRAMES; |
| for (j = k = 0; j < USBVISION_URB_FRAMES; j++, |
| k += usbvision->isoc_packet_size) { |
| urb->iso_frame_desc[j].offset = k; |
| urb->iso_frame_desc[j].length = |
| usbvision->isoc_packet_size; |
| } |
| } |
| |
| /* Submit all URBs */ |
| for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { |
| err_code = usb_submit_urb(usbvision->sbuf[buf_idx].urb, |
| GFP_KERNEL); |
| if (err_code) { |
| dev_err(&usbvision->dev->dev, |
| "%s: usb_submit_urb(%d) failed: error %d\n", |
| __func__, buf_idx, err_code); |
| } |
| } |
| |
| usbvision->streaming = stream_idle; |
| PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x", |
| __func__, |
| usbvision->video_endp); |
| return 0; |
| } |
| |
| /* |
| * usbvision_stop_isoc() |
| * |
| * This procedure stops streaming and deallocates URBs. Then it |
| * activates zero-bandwidth alt. setting of the video interface. |
| * |
| */ |
| void usbvision_stop_isoc(struct usb_usbvision *usbvision) |
| { |
| int buf_idx, err_code, reg_value; |
| int sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size; |
| |
| if ((usbvision->streaming == stream_off) || (usbvision->dev == NULL)) |
| return; |
| |
| /* Unschedule all of the iso td's */ |
| for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { |
| usb_kill_urb(usbvision->sbuf[buf_idx].urb); |
| if (usbvision->sbuf[buf_idx].data) { |
| usb_free_coherent(usbvision->dev, |
| sb_size, |
| usbvision->sbuf[buf_idx].data, |
| usbvision->sbuf[buf_idx].urb->transfer_dma); |
| } |
| usb_free_urb(usbvision->sbuf[buf_idx].urb); |
| usbvision->sbuf[buf_idx].urb = NULL; |
| } |
| |
| PDEBUG(DBG_ISOC, "%s: streaming=stream_off\n", __func__); |
| usbvision->streaming = stream_off; |
| |
| if (!usbvision->remove_pending) { |
| /* Set packet size to 0 */ |
| usbvision->iface_alt = 0; |
| err_code = usb_set_interface(usbvision->dev, usbvision->iface, |
| usbvision->iface_alt); |
| if (err_code < 0) { |
| dev_err(&usbvision->dev->dev, |
| "%s: usb_set_interface() failed: error %d\n", |
| __func__, err_code); |
| usbvision->last_error = err_code; |
| } |
| reg_value = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; |
| usbvision->isoc_packet_size = |
| (reg_value == 0) ? 0 : (reg_value * 64) - 1; |
| PDEBUG(DBG_ISOC, "ISO Packet Length:%d", |
| usbvision->isoc_packet_size); |
| |
| usbvision->usb_bandwidth = reg_value >> 1; |
| PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", |
| usbvision->usb_bandwidth); |
| } |
| } |
| |
| int usbvision_muxsel(struct usb_usbvision *usbvision, int channel) |
| { |
| /* inputs #0 and #3 are constant for every SAA711x. */ |
| /* inputs #1 and #2 are variable for SAA7111 and SAA7113 */ |
| int mode[4] = { SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3 }; |
| int audio[] = { 1, 0, 0, 0 }; |
| /* channel 0 is TV with audiochannel 1 (tuner mono) */ |
| /* channel 1 is Composite with audio channel 0 (line in) */ |
| /* channel 2 is S-Video with audio channel 0 (line in) */ |
| /* channel 3 is additional video inputs to the device with audio channel 0 (line in) */ |
| |
| RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs); |
| usbvision->ctl_input = channel; |
| |
| /* set the new channel */ |
| /* Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video */ |
| /* Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red */ |
| |
| switch (usbvision_device_data[usbvision->dev_model].codec) { |
| case CODEC_SAA7113: |
| mode[1] = SAA7115_COMPOSITE2; |
| if (switch_svideo_input) { |
| /* To handle problems with S-Video Input for |
| * some devices. Use switch_svideo_input |
| * parameter when loading the module.*/ |
| mode[2] = SAA7115_COMPOSITE1; |
| } else { |
| mode[2] = SAA7115_SVIDEO1; |
| } |
| break; |
| case CODEC_SAA7111: |
| default: |
| /* modes for saa7111 */ |
| mode[1] = SAA7115_COMPOSITE1; |
| mode[2] = SAA7115_SVIDEO1; |
| break; |
| } |
| call_all(usbvision, video, s_routing, mode[channel], 0, 0); |
| usbvision_set_audio(usbvision, audio[channel]); |
| return 0; |
| } |