| /* |
| * Test functionality of BPF filters with SO_REUSEPORT. This program creates |
| * an SO_REUSEPORT receiver group containing one socket per CPU core. It then |
| * creates a BPF program that will select a socket from this group based |
| * on the core id that receives the packet. The sending code artificially |
| * moves itself to run on different core ids and sends one message from |
| * each core. Since these packets are delivered over loopback, they should |
| * arrive on the same core that sent them. The receiving code then ensures |
| * that the packet was received on the socket for the corresponding core id. |
| * This entire process is done for several different core id permutations |
| * and for each IPv4/IPv6 and TCP/UDP combination. |
| */ |
| |
| #define _GNU_SOURCE |
| |
| #include <arpa/inet.h> |
| #include <errno.h> |
| #include <error.h> |
| #include <linux/filter.h> |
| #include <linux/in.h> |
| #include <linux/unistd.h> |
| #include <sched.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/epoll.h> |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <unistd.h> |
| |
| static const int PORT = 8888; |
| |
| static void build_rcv_group(int *rcv_fd, size_t len, int family, int proto) |
| { |
| struct sockaddr_storage addr; |
| struct sockaddr_in *addr4; |
| struct sockaddr_in6 *addr6; |
| size_t i; |
| int opt; |
| |
| switch (family) { |
| case AF_INET: |
| addr4 = (struct sockaddr_in *)&addr; |
| addr4->sin_family = AF_INET; |
| addr4->sin_addr.s_addr = htonl(INADDR_ANY); |
| addr4->sin_port = htons(PORT); |
| break; |
| case AF_INET6: |
| addr6 = (struct sockaddr_in6 *)&addr; |
| addr6->sin6_family = AF_INET6; |
| addr6->sin6_addr = in6addr_any; |
| addr6->sin6_port = htons(PORT); |
| break; |
| default: |
| error(1, 0, "Unsupported family %d", family); |
| } |
| |
| for (i = 0; i < len; ++i) { |
| rcv_fd[i] = socket(family, proto, 0); |
| if (rcv_fd[i] < 0) |
| error(1, errno, "failed to create receive socket"); |
| |
| opt = 1; |
| if (setsockopt(rcv_fd[i], SOL_SOCKET, SO_REUSEPORT, &opt, |
| sizeof(opt))) |
| error(1, errno, "failed to set SO_REUSEPORT"); |
| |
| if (bind(rcv_fd[i], (struct sockaddr *)&addr, sizeof(addr))) |
| error(1, errno, "failed to bind receive socket"); |
| |
| if (proto == SOCK_STREAM && listen(rcv_fd[i], len * 10)) |
| error(1, errno, "failed to listen on receive port"); |
| } |
| } |
| |
| static void attach_bpf(int fd) |
| { |
| struct sock_filter code[] = { |
| /* A = raw_smp_processor_id() */ |
| { BPF_LD | BPF_W | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_CPU }, |
| /* return A */ |
| { BPF_RET | BPF_A, 0, 0, 0 }, |
| }; |
| struct sock_fprog p = { |
| .len = 2, |
| .filter = code, |
| }; |
| |
| if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p))) |
| error(1, errno, "failed to set SO_ATTACH_REUSEPORT_CBPF"); |
| } |
| |
| static void send_from_cpu(int cpu_id, int family, int proto) |
| { |
| struct sockaddr_storage saddr, daddr; |
| struct sockaddr_in *saddr4, *daddr4; |
| struct sockaddr_in6 *saddr6, *daddr6; |
| cpu_set_t cpu_set; |
| int fd; |
| |
| switch (family) { |
| case AF_INET: |
| saddr4 = (struct sockaddr_in *)&saddr; |
| saddr4->sin_family = AF_INET; |
| saddr4->sin_addr.s_addr = htonl(INADDR_ANY); |
| saddr4->sin_port = 0; |
| |
| daddr4 = (struct sockaddr_in *)&daddr; |
| daddr4->sin_family = AF_INET; |
| daddr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK); |
| daddr4->sin_port = htons(PORT); |
| break; |
| case AF_INET6: |
| saddr6 = (struct sockaddr_in6 *)&saddr; |
| saddr6->sin6_family = AF_INET6; |
| saddr6->sin6_addr = in6addr_any; |
| saddr6->sin6_port = 0; |
| |
| daddr6 = (struct sockaddr_in6 *)&daddr; |
| daddr6->sin6_family = AF_INET6; |
| daddr6->sin6_addr = in6addr_loopback; |
| daddr6->sin6_port = htons(PORT); |
| break; |
| default: |
| error(1, 0, "Unsupported family %d", family); |
| } |
| |
| memset(&cpu_set, 0, sizeof(cpu_set)); |
| CPU_SET(cpu_id, &cpu_set); |
| if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) |
| error(1, errno, "failed to pin to cpu"); |
| |
| fd = socket(family, proto, 0); |
| if (fd < 0) |
| error(1, errno, "failed to create send socket"); |
| |
| if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr))) |
| error(1, errno, "failed to bind send socket"); |
| |
| if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr))) |
| error(1, errno, "failed to connect send socket"); |
| |
| if (send(fd, "a", 1, 0) < 0) |
| error(1, errno, "failed to send message"); |
| |
| close(fd); |
| } |
| |
| static |
| void receive_on_cpu(int *rcv_fd, int len, int epfd, int cpu_id, int proto) |
| { |
| struct epoll_event ev; |
| int i, fd; |
| char buf[8]; |
| |
| i = epoll_wait(epfd, &ev, 1, -1); |
| if (i < 0) |
| error(1, errno, "epoll_wait failed"); |
| |
| if (proto == SOCK_STREAM) { |
| fd = accept(ev.data.fd, NULL, NULL); |
| if (fd < 0) |
| error(1, errno, "failed to accept"); |
| i = recv(fd, buf, sizeof(buf), 0); |
| close(fd); |
| } else { |
| i = recv(ev.data.fd, buf, sizeof(buf), 0); |
| } |
| |
| if (i < 0) |
| error(1, errno, "failed to recv"); |
| |
| for (i = 0; i < len; ++i) |
| if (ev.data.fd == rcv_fd[i]) |
| break; |
| if (i == len) |
| error(1, 0, "failed to find socket"); |
| fprintf(stderr, "send cpu %d, receive socket %d\n", cpu_id, i); |
| if (cpu_id != i) |
| error(1, 0, "cpu id/receive socket mismatch"); |
| } |
| |
| static void test(int *rcv_fd, int len, int family, int proto) |
| { |
| struct epoll_event ev; |
| int epfd, cpu; |
| |
| build_rcv_group(rcv_fd, len, family, proto); |
| attach_bpf(rcv_fd[0]); |
| |
| epfd = epoll_create(1); |
| if (epfd < 0) |
| error(1, errno, "failed to create epoll"); |
| for (cpu = 0; cpu < len; ++cpu) { |
| ev.events = EPOLLIN; |
| ev.data.fd = rcv_fd[cpu]; |
| if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fd[cpu], &ev)) |
| error(1, errno, "failed to register sock epoll"); |
| } |
| |
| /* Forward iterate */ |
| for (cpu = 0; cpu < len; ++cpu) { |
| send_from_cpu(cpu, family, proto); |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); |
| } |
| |
| /* Reverse iterate */ |
| for (cpu = len - 1; cpu >= 0; --cpu) { |
| send_from_cpu(cpu, family, proto); |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); |
| } |
| |
| /* Even cores */ |
| for (cpu = 0; cpu < len; cpu += 2) { |
| send_from_cpu(cpu, family, proto); |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); |
| } |
| |
| /* Odd cores */ |
| for (cpu = 1; cpu < len; cpu += 2) { |
| send_from_cpu(cpu, family, proto); |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); |
| } |
| |
| close(epfd); |
| for (cpu = 0; cpu < len; ++cpu) |
| close(rcv_fd[cpu]); |
| } |
| |
| int main(void) |
| { |
| int *rcv_fd, cpus; |
| |
| cpus = sysconf(_SC_NPROCESSORS_ONLN); |
| if (cpus <= 0) |
| error(1, errno, "failed counting cpus"); |
| |
| rcv_fd = calloc(cpus, sizeof(int)); |
| if (!rcv_fd) |
| error(1, 0, "failed to allocate array"); |
| |
| fprintf(stderr, "---- IPv4 UDP ----\n"); |
| test(rcv_fd, cpus, AF_INET, SOCK_DGRAM); |
| |
| fprintf(stderr, "---- IPv6 UDP ----\n"); |
| test(rcv_fd, cpus, AF_INET6, SOCK_DGRAM); |
| |
| fprintf(stderr, "---- IPv4 TCP ----\n"); |
| test(rcv_fd, cpus, AF_INET, SOCK_STREAM); |
| |
| fprintf(stderr, "---- IPv6 TCP ----\n"); |
| test(rcv_fd, cpus, AF_INET6, SOCK_STREAM); |
| |
| free(rcv_fd); |
| |
| fprintf(stderr, "SUCCESS\n"); |
| return 0; |
| } |