| /* |
| * VMI paravirtual timer support routines. |
| * |
| * Copyright (C) 2005, VMware, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to dhecht@vmware.com |
| * |
| */ |
| |
| /* |
| * Portions of this code from arch/i386/kernel/timers/timer_tsc.c. |
| * Portions of the CONFIG_NO_IDLE_HZ code from arch/s390/kernel/time.c. |
| * See comments there for proper credits. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/jiffies.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/rcupdate.h> |
| #include <linux/clocksource.h> |
| |
| #include <asm/timer.h> |
| #include <asm/io.h> |
| #include <asm/apic.h> |
| #include <asm/div64.h> |
| #include <asm/timer.h> |
| #include <asm/desc.h> |
| |
| #include <asm/vmi.h> |
| #include <asm/vmi_time.h> |
| |
| #include <mach_timer.h> |
| #include <io_ports.h> |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| #define VMI_ALARM_WIRING VMI_ALARM_WIRED_LVTT |
| #else |
| #define VMI_ALARM_WIRING VMI_ALARM_WIRED_IRQ0 |
| #endif |
| |
| /* Cached VMI operations */ |
| struct vmi_timer_ops vmi_timer_ops; |
| |
| #ifdef CONFIG_NO_IDLE_HZ |
| |
| /* /proc/sys/kernel/hz_timer state. */ |
| int sysctl_hz_timer; |
| |
| /* Some stats */ |
| static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_irqs); |
| static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_jiffies); |
| static DEFINE_PER_CPU(unsigned long, idle_start_jiffies); |
| |
| #endif /* CONFIG_NO_IDLE_HZ */ |
| |
| /* Number of alarms per second. By default this is CONFIG_VMI_ALARM_HZ. */ |
| static int alarm_hz = CONFIG_VMI_ALARM_HZ; |
| |
| /* Cache of the value get_cycle_frequency / HZ. */ |
| static signed long long cycles_per_jiffy; |
| |
| /* Cache of the value get_cycle_frequency / alarm_hz. */ |
| static signed long long cycles_per_alarm; |
| |
| /* The number of cycles accounted for by the 'jiffies'/'xtime' count. |
| * Protected by xtime_lock. */ |
| static unsigned long long real_cycles_accounted_system; |
| |
| /* The number of cycles accounted for by update_process_times(), per cpu. */ |
| static DEFINE_PER_CPU(unsigned long long, process_times_cycles_accounted_cpu); |
| |
| /* The number of stolen cycles accounted, per cpu. */ |
| static DEFINE_PER_CPU(unsigned long long, stolen_cycles_accounted_cpu); |
| |
| /* Clock source. */ |
| static cycle_t read_real_cycles(void) |
| { |
| return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); |
| } |
| |
| static cycle_t read_available_cycles(void) |
| { |
| return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE); |
| } |
| |
| #if 0 |
| static cycle_t read_stolen_cycles(void) |
| { |
| return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_STOLEN); |
| } |
| #endif /* 0 */ |
| |
| static struct clocksource clocksource_vmi = { |
| .name = "vmi-timer", |
| .rating = 450, |
| .read = read_real_cycles, |
| .mask = CLOCKSOURCE_MASK(64), |
| .mult = 0, /* to be set */ |
| .shift = 22, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| |
| /* Timer interrupt handler. */ |
| static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id); |
| |
| static struct irqaction vmi_timer_irq = { |
| .handler = vmi_timer_interrupt, |
| .flags = IRQF_DISABLED, |
| .mask = CPU_MASK_NONE, |
| .name = "VMI-alarm", |
| }; |
| |
| /* Alarm rate */ |
| static int __init vmi_timer_alarm_rate_setup(char* str) |
| { |
| int alarm_rate; |
| if (get_option(&str, &alarm_rate) == 1 && alarm_rate > 0) { |
| alarm_hz = alarm_rate; |
| printk(KERN_WARNING "VMI timer alarm HZ set to %d\n", alarm_hz); |
| } |
| return 1; |
| } |
| __setup("vmi_timer_alarm_hz=", vmi_timer_alarm_rate_setup); |
| |
| |
| /* Initialization */ |
| static void vmi_get_wallclock_ts(struct timespec *ts) |
| { |
| unsigned long long wallclock; |
| wallclock = vmi_timer_ops.get_wallclock(); // nsec units |
| ts->tv_nsec = do_div(wallclock, 1000000000); |
| ts->tv_sec = wallclock; |
| } |
| |
| unsigned long vmi_get_wallclock(void) |
| { |
| struct timespec ts; |
| vmi_get_wallclock_ts(&ts); |
| return ts.tv_sec; |
| } |
| |
| int vmi_set_wallclock(unsigned long now) |
| { |
| return -1; |
| } |
| |
| unsigned long long vmi_get_sched_cycles(void) |
| { |
| return read_available_cycles(); |
| } |
| |
| unsigned long vmi_cpu_khz(void) |
| { |
| unsigned long long khz; |
| |
| khz = vmi_timer_ops.get_cycle_frequency(); |
| (void)do_div(khz, 1000); |
| return khz; |
| } |
| |
| void __init vmi_time_init(void) |
| { |
| unsigned long long cycles_per_sec, cycles_per_msec; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| setup_irq(0, &vmi_timer_irq); |
| #ifdef CONFIG_X86_LOCAL_APIC |
| set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); |
| #endif |
| |
| real_cycles_accounted_system = read_real_cycles(); |
| per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles(); |
| |
| cycles_per_sec = vmi_timer_ops.get_cycle_frequency(); |
| cycles_per_jiffy = cycles_per_sec; |
| (void)do_div(cycles_per_jiffy, HZ); |
| cycles_per_alarm = cycles_per_sec; |
| (void)do_div(cycles_per_alarm, alarm_hz); |
| cycles_per_msec = cycles_per_sec; |
| (void)do_div(cycles_per_msec, 1000); |
| |
| printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;" |
| "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy, |
| cycles_per_alarm); |
| |
| clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec, |
| clocksource_vmi.shift); |
| if (clocksource_register(&clocksource_vmi)) |
| printk(KERN_WARNING "Error registering VMITIME clocksource."); |
| |
| /* Disable PIT. */ |
| outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ |
| |
| /* schedule the alarm. do this in phase with process_times_cycles_accounted_cpu |
| * reduce the latency calling update_process_times. */ |
| vmi_timer_ops.set_alarm( |
| VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, |
| per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, |
| cycles_per_alarm); |
| |
| local_irq_restore(flags); |
| } |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| |
| void __init vmi_timer_setup_boot_alarm(void) |
| { |
| local_irq_disable(); |
| |
| /* Route the interrupt to the correct vector. */ |
| apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); |
| |
| /* Cancel the IRQ0 wired alarm, and setup the LVTT alarm. */ |
| vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); |
| vmi_timer_ops.set_alarm( |
| VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, |
| per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, |
| cycles_per_alarm); |
| local_irq_enable(); |
| } |
| |
| /* Initialize the time accounting variables for an AP on an SMP system. |
| * Also, set the local alarm for the AP. */ |
| void __devinit vmi_timer_setup_secondary_alarm(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| /* Route the interrupt to the correct vector. */ |
| apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); |
| |
| per_cpu(process_times_cycles_accounted_cpu, cpu) = read_available_cycles(); |
| |
| vmi_timer_ops.set_alarm( |
| VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, |
| per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, |
| cycles_per_alarm); |
| } |
| |
| #endif |
| |
| /* Update system wide (real) time accounting (e.g. jiffies, xtime). */ |
| static void vmi_account_real_cycles(unsigned long long cur_real_cycles) |
| { |
| long long cycles_not_accounted; |
| |
| write_seqlock(&xtime_lock); |
| |
| cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system; |
| while (cycles_not_accounted >= cycles_per_jiffy) { |
| /* systems wide jiffies. */ |
| do_timer(1); |
| |
| cycles_not_accounted -= cycles_per_jiffy; |
| real_cycles_accounted_system += cycles_per_jiffy; |
| } |
| |
| write_sequnlock(&xtime_lock); |
| } |
| |
| /* Update per-cpu process times. */ |
| static void vmi_account_process_times_cycles(struct pt_regs *regs, int cpu, |
| unsigned long long cur_process_times_cycles) |
| { |
| long long cycles_not_accounted; |
| cycles_not_accounted = cur_process_times_cycles - |
| per_cpu(process_times_cycles_accounted_cpu, cpu); |
| |
| while (cycles_not_accounted >= cycles_per_jiffy) { |
| /* Account time to the current process. This includes |
| * calling into the scheduler to decrement the timeslice |
| * and possibly reschedule.*/ |
| update_process_times(user_mode(regs)); |
| /* XXX handle /proc/profile multiplier. */ |
| profile_tick(CPU_PROFILING); |
| |
| cycles_not_accounted -= cycles_per_jiffy; |
| per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; |
| } |
| } |
| |
| #ifdef CONFIG_NO_IDLE_HZ |
| /* Update per-cpu idle times. Used when a no-hz halt is ended. */ |
| static void vmi_account_no_hz_idle_cycles(int cpu, |
| unsigned long long cur_process_times_cycles) |
| { |
| long long cycles_not_accounted; |
| unsigned long no_idle_hz_jiffies = 0; |
| |
| cycles_not_accounted = cur_process_times_cycles - |
| per_cpu(process_times_cycles_accounted_cpu, cpu); |
| |
| while (cycles_not_accounted >= cycles_per_jiffy) { |
| no_idle_hz_jiffies++; |
| cycles_not_accounted -= cycles_per_jiffy; |
| per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; |
| } |
| /* Account time to the idle process. */ |
| account_steal_time(idle_task(cpu), jiffies_to_cputime(no_idle_hz_jiffies)); |
| } |
| #endif |
| |
| /* Update per-cpu stolen time. */ |
| static void vmi_account_stolen_cycles(int cpu, |
| unsigned long long cur_real_cycles, |
| unsigned long long cur_avail_cycles) |
| { |
| long long stolen_cycles_not_accounted; |
| unsigned long stolen_jiffies = 0; |
| |
| if (cur_real_cycles < cur_avail_cycles) |
| return; |
| |
| stolen_cycles_not_accounted = cur_real_cycles - cur_avail_cycles - |
| per_cpu(stolen_cycles_accounted_cpu, cpu); |
| |
| while (stolen_cycles_not_accounted >= cycles_per_jiffy) { |
| stolen_jiffies++; |
| stolen_cycles_not_accounted -= cycles_per_jiffy; |
| per_cpu(stolen_cycles_accounted_cpu, cpu) += cycles_per_jiffy; |
| } |
| /* HACK: pass NULL to force time onto cpustat->steal. */ |
| account_steal_time(NULL, jiffies_to_cputime(stolen_jiffies)); |
| } |
| |
| /* Body of either IRQ0 interrupt handler (UP no local-APIC) or |
| * local-APIC LVTT interrupt handler (UP & local-APIC or SMP). */ |
| static void vmi_local_timer_interrupt(int cpu) |
| { |
| unsigned long long cur_real_cycles, cur_process_times_cycles; |
| |
| cur_real_cycles = read_real_cycles(); |
| cur_process_times_cycles = read_available_cycles(); |
| /* Update system wide (real) time state (xtime, jiffies). */ |
| vmi_account_real_cycles(cur_real_cycles); |
| /* Update per-cpu process times. */ |
| vmi_account_process_times_cycles(get_irq_regs(), cpu, cur_process_times_cycles); |
| /* Update time stolen from this cpu by the hypervisor. */ |
| vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); |
| } |
| |
| #ifdef CONFIG_NO_IDLE_HZ |
| |
| /* Must be called only from idle loop, with interrupts disabled. */ |
| int vmi_stop_hz_timer(void) |
| { |
| /* Note that cpu_set, cpu_clear are (SMP safe) atomic on x86. */ |
| |
| unsigned long seq, next; |
| unsigned long long real_cycles_expiry; |
| int cpu = smp_processor_id(); |
| |
| BUG_ON(!irqs_disabled()); |
| if (sysctl_hz_timer != 0) |
| return 0; |
| |
| cpu_set(cpu, nohz_cpu_mask); |
| smp_mb(); |
| |
| if (rcu_needs_cpu(cpu) || local_softirq_pending() || |
| (next = next_timer_interrupt(), |
| time_before_eq(next, jiffies + HZ/CONFIG_VMI_ALARM_HZ))) { |
| cpu_clear(cpu, nohz_cpu_mask); |
| return 0; |
| } |
| |
| /* Convert jiffies to the real cycle counter. */ |
| do { |
| seq = read_seqbegin(&xtime_lock); |
| real_cycles_expiry = real_cycles_accounted_system + |
| (long)(next - jiffies) * cycles_per_jiffy; |
| } while (read_seqretry(&xtime_lock, seq)); |
| |
| /* This cpu is going idle. Disable the periodic alarm. */ |
| vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); |
| per_cpu(idle_start_jiffies, cpu) = jiffies; |
| /* Set the real time alarm to expire at the next event. */ |
| vmi_timer_ops.set_alarm( |
| VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL, |
| real_cycles_expiry, 0); |
| return 1; |
| } |
| |
| static void vmi_reenable_hz_timer(int cpu) |
| { |
| /* For /proc/vmi/info idle_hz stat. */ |
| per_cpu(vmi_idle_no_hz_jiffies, cpu) += jiffies - per_cpu(idle_start_jiffies, cpu); |
| per_cpu(vmi_idle_no_hz_irqs, cpu)++; |
| |
| /* Don't bother explicitly cancelling the one-shot alarm -- at |
| * worse we will receive a spurious timer interrupt. */ |
| vmi_timer_ops.set_alarm( |
| VMI_ALARM_WIRING | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, |
| per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, |
| cycles_per_alarm); |
| /* Indicate this cpu is no longer nohz idle. */ |
| cpu_clear(cpu, nohz_cpu_mask); |
| } |
| |
| /* Called from interrupt handlers when (local) HZ timer is disabled. */ |
| void vmi_account_time_restart_hz_timer(void) |
| { |
| unsigned long long cur_real_cycles, cur_process_times_cycles; |
| int cpu = smp_processor_id(); |
| |
| BUG_ON(!irqs_disabled()); |
| /* Account the time during which the HZ timer was disabled. */ |
| cur_real_cycles = read_real_cycles(); |
| cur_process_times_cycles = read_available_cycles(); |
| /* Update system wide (real) time state (xtime, jiffies). */ |
| vmi_account_real_cycles(cur_real_cycles); |
| /* Update per-cpu idle times. */ |
| vmi_account_no_hz_idle_cycles(cpu, cur_process_times_cycles); |
| /* Update time stolen from this cpu by the hypervisor. */ |
| vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); |
| /* Reenable the hz timer. */ |
| vmi_reenable_hz_timer(cpu); |
| } |
| |
| #endif /* CONFIG_NO_IDLE_HZ */ |
| |
| /* UP (and no local-APIC) VMI-timer alarm interrupt handler. |
| * Handler for IRQ0. Not used when SMP or X86_LOCAL_APIC after |
| * APIC setup and setup_boot_vmi_alarm() is called. */ |
| static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id) |
| { |
| vmi_local_timer_interrupt(smp_processor_id()); |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| |
| /* SMP VMI-timer alarm interrupt handler. Handler for LVTT vector. |
| * Also used in UP when CONFIG_X86_LOCAL_APIC. |
| * The wrapper code is from arch/i386/kernel/apic.c#smp_apic_timer_interrupt. */ |
| void smp_apic_vmi_timer_interrupt(struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| int cpu = smp_processor_id(); |
| |
| /* |
| * the NMI deadlock-detector uses this. |
| */ |
| per_cpu(irq_stat,cpu).apic_timer_irqs++; |
| |
| /* |
| * NOTE! We'd better ACK the irq immediately, |
| * because timer handling can be slow. |
| */ |
| ack_APIC_irq(); |
| |
| /* |
| * update_process_times() expects us to have done irq_enter(). |
| * Besides, if we don't timer interrupts ignore the global |
| * interrupt lock, which is the WrongThing (tm) to do. |
| */ |
| irq_enter(); |
| vmi_local_timer_interrupt(cpu); |
| irq_exit(); |
| set_irq_regs(old_regs); |
| } |
| |
| #endif /* CONFIG_X86_LOCAL_APIC */ |