| /* |
| * |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] |
| * |
| * Extended 3 / 2005 by Hartmut Hackmann to support various |
| * cards with the tda10046 DVB-T channel decoder |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include <linux/suspend.h> |
| |
| #include "saa7134-reg.h" |
| #include "saa7134.h" |
| #include <media/v4l2-common.h> |
| #include "dvb-pll.h" |
| |
| #include "mt352.h" |
| #include "mt352_priv.h" /* FIXME */ |
| #include "tda1004x.h" |
| #include "nxt200x.h" |
| |
| #include "tda10086.h" |
| #include "tda826x.h" |
| #include "tda827x.h" |
| #include "isl6421.h" |
| |
| MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int antenna_pwr = 0; |
| |
| module_param(antenna_pwr, int, 0444); |
| MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); |
| |
| static int use_frontend = 0; |
| module_param(use_frontend, int, 0644); |
| MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); |
| |
| static int debug = 0; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); |
| |
| #define dprintk(fmt, arg...) do { if (debug) \ |
| printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) |
| |
| /* Print a warning */ |
| #define wprintk(fmt, arg...) \ |
| printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) |
| |
| /* ------------------------------------------------------------------ |
| * mt352 based DVB-T cards |
| */ |
| |
| static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) |
| { |
| u32 ok; |
| |
| if (!on) { |
| saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); |
| saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
| return 0; |
| } |
| |
| saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); |
| saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
| udelay(10); |
| |
| saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); |
| saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); |
| udelay(10); |
| saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); |
| udelay(10); |
| ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); |
| dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off"); |
| |
| if (!ok) |
| saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
| return ok; |
| } |
| |
| static int mt352_pinnacle_init(struct dvb_frontend* fe) |
| { |
| static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; |
| static u8 reset [] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; |
| static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; |
| static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; |
| static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; |
| static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; |
| struct saa7134_dev *dev= fe->dvb->priv; |
| |
| dprintk("%s called\n", __FUNCTION__); |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| |
| mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); |
| mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); |
| mt352_write(fe, irq_cfg, sizeof(irq_cfg)); |
| |
| return 0; |
| } |
| |
| static int mt352_aver777_init(struct dvb_frontend* fe) |
| { |
| static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; |
| static u8 reset [] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters* params) |
| { |
| u8 off[] = { 0x00, 0xf1}; |
| u8 on[] = { 0x00, 0x71}; |
| struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; |
| |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct v4l2_frequency f; |
| |
| /* set frequency (mt2050) */ |
| f.tuner = 0; |
| f.type = V4L2_TUNER_DIGITAL_TV; |
| f.frequency = params->frequency / 1000 * 16 / 1000; |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| i2c_transfer(&dev->i2c_adap, &msg, 1); |
| saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); |
| msg.buf = on; |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| i2c_transfer(&dev->i2c_adap, &msg, 1); |
| |
| pinnacle_antenna_pwr(dev, antenna_pwr); |
| |
| /* mt352 setup */ |
| return mt352_pinnacle_init(fe); |
| } |
| |
| static int mt352_aver777_tuner_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) |
| { |
| if (buf_len < 5) |
| return -EINVAL; |
| |
| pllbuf[0] = 0x61; |
| dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1, |
| params->frequency, |
| params->u.ofdm.bandwidth); |
| return 5; |
| } |
| |
| static struct mt352_config pinnacle_300i = { |
| .demod_address = 0x3c >> 1, |
| .adc_clock = 20333, |
| .if2 = 36150, |
| .no_tuner = 1, |
| .demod_init = mt352_pinnacle_init, |
| }; |
| |
| static struct mt352_config avermedia_777 = { |
| .demod_address = 0xf, |
| .demod_init = mt352_aver777_init, |
| }; |
| |
| /* ================================================================== |
| * tda1004x based DVB-T cards, helper functions |
| */ |
| |
| static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, |
| const struct firmware **fw, char *name) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| return request_firmware(fw, name, &dev->pci->dev); |
| } |
| |
| /* ------------------------------------------------------------------ |
| * these tuners are tu1216, td1316(a) |
| */ |
| |
| static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| u8 tuner_buf[4]; |
| struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = |
| sizeof(tuner_buf) }; |
| int tuner_frequency = 0; |
| u8 band, cp, filter; |
| |
| /* determine charge pump */ |
| tuner_frequency = params->frequency + 36166000; |
| if (tuner_frequency < 87000000) |
| return -EINVAL; |
| else if (tuner_frequency < 130000000) |
| cp = 3; |
| else if (tuner_frequency < 160000000) |
| cp = 5; |
| else if (tuner_frequency < 200000000) |
| cp = 6; |
| else if (tuner_frequency < 290000000) |
| cp = 3; |
| else if (tuner_frequency < 420000000) |
| cp = 5; |
| else if (tuner_frequency < 480000000) |
| cp = 6; |
| else if (tuner_frequency < 620000000) |
| cp = 3; |
| else if (tuner_frequency < 830000000) |
| cp = 5; |
| else if (tuner_frequency < 895000000) |
| cp = 7; |
| else |
| return -EINVAL; |
| |
| /* determine band */ |
| if (params->frequency < 49000000) |
| return -EINVAL; |
| else if (params->frequency < 161000000) |
| band = 1; |
| else if (params->frequency < 444000000) |
| band = 2; |
| else if (params->frequency < 861000000) |
| band = 4; |
| else |
| return -EINVAL; |
| |
| /* setup PLL filter */ |
| switch (params->u.ofdm.bandwidth) { |
| case BANDWIDTH_6_MHZ: |
| filter = 0; |
| break; |
| |
| case BANDWIDTH_7_MHZ: |
| filter = 0; |
| break; |
| |
| case BANDWIDTH_8_MHZ: |
| filter = 1; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* calculate divisor |
| * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) |
| */ |
| tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000; |
| |
| /* setup tuner buffer */ |
| tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; |
| tuner_buf[1] = tuner_frequency & 0xff; |
| tuner_buf[2] = 0xca; |
| tuner_buf[3] = (cp << 5) | (filter << 3) | band; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { |
| wprintk("could not write to tuner at addr: 0x%02x\n", |
| addr << 1); |
| return -EIO; |
| } |
| msleep(1); |
| return 0; |
| } |
| |
| static int philips_tu1216_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; |
| struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; |
| |
| /* setup PLL configuration */ |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) |
| return -EIO; |
| msleep(1); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static struct tda1004x_config philips_tu1216_60_config = { |
| .demod_address = 0x8, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_4M, |
| .agc_config = TDA10046_AGC_DEFAULT, |
| .if_freq = TDA10046_FREQ_3617, |
| .tuner_address = 0x60, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config philips_tu1216_61_config = { |
| |
| .demod_address = 0x8, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_4M, |
| .agc_config = TDA10046_AGC_DEFAULT, |
| .if_freq = TDA10046_FREQ_3617, |
| .tuner_address = 0x61, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int philips_td1316_tuner_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; |
| struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
| |
| /* setup PLL configuration */ |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) |
| return -EIO; |
| return 0; |
| } |
| |
| static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
| { |
| return philips_tda6651_pll_set(fe, params); |
| } |
| |
| static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; |
| struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
| |
| /* switch the tuner to analog mode */ |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) |
| return -EIO; |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int philips_europa_tuner_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| static u8 msg[] = { 0x00, 0x40}; |
| struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
| |
| |
| if (philips_td1316_tuner_init(fe)) |
| return -EIO; |
| msleep(1); |
| if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int philips_europa_tuner_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| |
| static u8 msg[] = { 0x00, 0x14 }; |
| struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
| |
| if (philips_td1316_tuner_sleep(fe)) |
| return -EIO; |
| |
| /* switch the board to analog mode */ |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| i2c_transfer(&dev->i2c_adap, &analog_msg, 1); |
| return 0; |
| } |
| |
| static int philips_europa_demod_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| |
| if (dev->original_demod_sleep) |
| dev->original_demod_sleep(fe); |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| return 0; |
| } |
| |
| static struct tda1004x_config philips_europa_config = { |
| |
| .demod_address = 0x8, |
| .invert = 0, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_4M, |
| .agc_config = TDA10046_AGC_IFO_AUTO_POS, |
| .if_freq = TDA10046_FREQ_052, |
| .tuner_address = 0x61, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int philips_fmd1216_tuner_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| /* this message is to set up ATC and ALC */ |
| static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 }; |
| struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) }; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) |
| return -EIO; |
| msleep(1); |
| |
| return 0; |
| } |
| |
| static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| /* this message actually turns the tuner back to analog mode */ |
| u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 }; |
| struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) }; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); |
| msleep(1); |
| fmd1216_init[2] = 0x86; |
| fmd1216_init[3] = 0x54; |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); |
| msleep(1); |
| return 0; |
| } |
| |
| static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->tuner_address; |
| u8 tuner_buf[4]; |
| struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = |
| sizeof(tuner_buf) }; |
| int tuner_frequency = 0; |
| int divider = 0; |
| u8 band, mode, cp; |
| |
| /* determine charge pump */ |
| tuner_frequency = params->frequency + 36130000; |
| if (tuner_frequency < 87000000) |
| return -EINVAL; |
| /* low band */ |
| else if (tuner_frequency < 180000000) { |
| band = 1; |
| mode = 7; |
| cp = 0; |
| } else if (tuner_frequency < 195000000) { |
| band = 1; |
| mode = 6; |
| cp = 1; |
| /* mid band */ |
| } else if (tuner_frequency < 366000000) { |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { |
| band = 10; |
| } else { |
| band = 2; |
| } |
| mode = 7; |
| cp = 0; |
| } else if (tuner_frequency < 478000000) { |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { |
| band = 10; |
| } else { |
| band = 2; |
| } |
| mode = 6; |
| cp = 1; |
| /* high band */ |
| } else if (tuner_frequency < 662000000) { |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { |
| band = 12; |
| } else { |
| band = 4; |
| } |
| mode = 7; |
| cp = 0; |
| } else if (tuner_frequency < 840000000) { |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { |
| band = 12; |
| } else { |
| band = 4; |
| } |
| mode = 6; |
| cp = 1; |
| } else { |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { |
| band = 12; |
| } else { |
| band = 4; |
| } |
| mode = 7; |
| cp = 1; |
| |
| } |
| /* calculate divisor */ |
| /* ((36166000 + Finput) / 166666) rounded! */ |
| divider = (tuner_frequency + 83333) / 166667; |
| |
| /* setup tuner buffer */ |
| tuner_buf[0] = (divider >> 8) & 0x7f; |
| tuner_buf[1] = divider & 0xff; |
| tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4; |
| tuner_buf[3] = 0x40 | band; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { |
| wprintk("could not write to tuner at addr: 0x%02x\n", |
| addr << 1); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static struct tda1004x_config medion_cardbus = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_IFO_AUTO_NEG, |
| .if_freq = TDA10046_FREQ_3613, |
| .tuner_address = 0x61, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| /* ------------------------------------------------------------------ |
| * tda 1004x based cards with philips silicon tuner |
| */ |
| |
| static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| u8 addr = state->config->i2c_gate; |
| u8 config = state->config->tuner_config; |
| u8 GP00_CF[] = {0x20, 0x01}; |
| u8 GP00_LEV[] = {0x22, 0x00}; |
| |
| struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2}; |
| if (config) { |
| if (high) { |
| dprintk("setting LNA to high gain\n"); |
| } else { |
| dprintk("setting LNA to low gain\n"); |
| } |
| } |
| switch (config) { |
| case 0: /* no LNA */ |
| break; |
| case 1: /* switch is GPIO 0 of tda8290 */ |
| case 2: |
| /* turn Vsync off */ |
| saa7134_set_gpio(dev, 22, 0); |
| GP00_LEV[1] = high ? 0 : 1; |
| if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { |
| wprintk("could not access tda8290 at addr: 0x%02x\n", |
| addr << 1); |
| return; |
| } |
| msg.buf = GP00_LEV; |
| if (config == 2) |
| GP00_LEV[1] = high ? 1 : 0; |
| i2c_transfer(&dev->i2c_adap, &msg, 1); |
| break; |
| case 3: /* switch with GPIO of saa713x */ |
| saa7134_set_gpio(dev, 22, high); |
| break; |
| } |
| } |
| |
| static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) |
| { |
| struct tda1004x_state *state = fe->demodulator_priv; |
| |
| u8 addr = state->config->i2c_gate; |
| static u8 tda8290_close[] = { 0x21, 0xc0}; |
| static u8 tda8290_open[] = { 0x21, 0x80}; |
| struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; |
| if (enable) { |
| tda8290_msg.buf = tda8290_close; |
| } else { |
| tda8290_msg.buf = tda8290_open; |
| } |
| if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| wprintk("could not access tda8290 I2C gate\n"); |
| return -EIO; |
| } |
| msleep(20); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int philips_tda827x_tuner_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| |
| switch (state->config->antenna_switch) { |
| case 0: break; |
| case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); |
| saa7134_set_gpio(dev, 21, 0); |
| break; |
| case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); |
| saa7134_set_gpio(dev, 21, 1); |
| break; |
| } |
| return 0; |
| } |
| |
| static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| struct tda1004x_state *state = fe->demodulator_priv; |
| |
| switch (state->config->antenna_switch) { |
| case 0: break; |
| case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); |
| saa7134_set_gpio(dev, 21, 1); |
| break; |
| case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); |
| saa7134_set_gpio(dev, 21, 0); |
| break; |
| } |
| return 0; |
| } |
| |
| static struct tda827x_config tda827x_cfg = { |
| .lna_gain = philips_tda827x_lna_gain, |
| .init = philips_tda827x_tuner_init, |
| .sleep = philips_tda827x_tuner_sleep |
| }; |
| |
| static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf) |
| { |
| dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| if (tda_conf->i2c_gate) |
| dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; |
| if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address, |
| &dev->i2c_adap,&tda827x_cfg) == NULL) { |
| wprintk("no tda827x tuner found at addr: %02x\n", |
| tda_conf->tuner_address); |
| } |
| } |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| static struct tda1004x_config tda827x_lifeview_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .tuner_address = 0x60, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config philips_tiger_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 0, |
| .antenna_switch= 1, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config cinergy_ht_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP01_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 0, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config cinergy_ht_pci_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP01_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x60, |
| .tuner_config = 0, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config philips_tiger_s_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP01_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 2, |
| .antenna_switch= 1, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config pinnacle_pctv_310i_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 1, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config hauppauge_hvr_1110_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config asus_p7131_dual_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 0, |
| .antenna_switch= 2, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config lifeview_trio_config = { |
| .demod_address = 0x09, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP00_I, |
| .if_freq = TDA10046_FREQ_045, |
| .tuner_address = 0x60, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config tevion_dvbt220rf_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .tuner_address = 0x60, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config md8800_dvbt_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP01_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x60, |
| .tuner_config = 0, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config asus_p7131_4871_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP01_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 2, |
| .antenna_switch= 2, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| static struct tda1004x_config asus_p7131_dual_lna_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP11_I, |
| .if_freq = TDA10046_FREQ_045, |
| .i2c_gate = 0x4b, |
| .tuner_address = 0x61, |
| .tuner_config = 2, |
| .antenna_switch= 2, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| /* ------------------------------------------------------------------ |
| * special case: this card uses saa713x GPIO22 for the mode switch |
| */ |
| |
| static int ads_duo_tuner_init(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| philips_tda827x_tuner_init(fe); |
| /* route TDA8275a AGC input to the channel decoder */ |
| saa7134_set_gpio(dev, 22, 1); |
| return 0; |
| } |
| |
| static int ads_duo_tuner_sleep(struct dvb_frontend *fe) |
| { |
| struct saa7134_dev *dev = fe->dvb->priv; |
| /* route TDA8275a AGC input to the analog IF chip*/ |
| saa7134_set_gpio(dev, 22, 0); |
| philips_tda827x_tuner_sleep(fe); |
| return 0; |
| } |
| |
| static struct tda827x_config ads_duo_cfg = { |
| .lna_gain = philips_tda827x_lna_gain, |
| .init = ads_duo_tuner_init, |
| .sleep = ads_duo_tuner_sleep |
| }; |
| |
| static struct tda1004x_config ads_tech_duo_config = { |
| .demod_address = 0x08, |
| .invert = 1, |
| .invert_oclk = 0, |
| .xtal_freq = TDA10046_XTAL_16M, |
| .agc_config = TDA10046_AGC_TDA827X, |
| .gpio_config = TDA10046_GP00_I, |
| .if_freq = TDA10046_FREQ_045, |
| .tuner_address = 0x61, |
| .request_firmware = philips_tda1004x_request_firmware |
| }; |
| |
| /* ================================================================== |
| * tda10086 based DVB-S cards, helper functions |
| */ |
| |
| static struct tda10086_config flydvbs = { |
| .demod_address = 0x0e, |
| .invert = 0, |
| }; |
| |
| /* ================================================================== |
| * nxt200x based ATSC cards, helper functions |
| */ |
| |
| static struct nxt200x_config avertvhda180 = { |
| .demod_address = 0x0a, |
| }; |
| |
| static int nxt200x_set_pll_input(u8 *buf, int input) |
| { |
| if (input) |
| buf[3] |= 0x08; |
| else |
| buf[3] &= ~0x08; |
| return 0; |
| } |
| |
| static struct nxt200x_config kworldatsc110 = { |
| .demod_address = 0x0a, |
| .set_pll_input = nxt200x_set_pll_input, |
| }; |
| |
| /* ================================================================== |
| * Core code |
| */ |
| |
| static int dvb_init(struct saa7134_dev *dev) |
| { |
| int ret; |
| /* init struct videobuf_dvb */ |
| dev->ts.nr_bufs = 32; |
| dev->ts.nr_packets = 32*4; |
| dev->dvb.name = dev->name; |
| videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops, |
| dev->pci, &dev->slock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_ALTERNATE, |
| sizeof(struct saa7134_buf), |
| dev); |
| |
| switch (dev->board) { |
| case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: |
| dprintk("pinnacle 300i dvb setup\n"); |
| dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; |
| } |
| break; |
| case SAA7134_BOARD_AVERMEDIA_777: |
| case SAA7134_BOARD_AVERMEDIA_A16AR: |
| dprintk("avertv 777 dvb setup\n"); |
| dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.calc_regs = mt352_aver777_tuner_calc_regs; |
| } |
| break; |
| case SAA7134_BOARD_MD7134: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &medion_cardbus, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init; |
| dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params; |
| } |
| break; |
| case SAA7134_BOARD_PHILIPS_TOUGH: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &philips_tu1216_60_config, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; |
| } |
| break; |
| case SAA7134_BOARD_FLYDVBTDUO: |
| case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: |
| configure_tda827x_fe(dev, &tda827x_lifeview_config); |
| break; |
| case SAA7134_BOARD_PHILIPS_EUROPA: |
| case SAA7134_BOARD_VIDEOMATE_DVBT_300: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &philips_europa_config, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; |
| dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; |
| dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; |
| dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; |
| } |
| break; |
| case SAA7134_BOARD_VIDEOMATE_DVBT_200: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &philips_tu1216_61_config, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; |
| } |
| break; |
| case SAA7134_BOARD_PHILIPS_TIGER: |
| configure_tda827x_fe(dev, &philips_tiger_config); |
| break; |
| case SAA7134_BOARD_PINNACLE_PCTV_310i: |
| configure_tda827x_fe(dev, &pinnacle_pctv_310i_config); |
| break; |
| case SAA7134_BOARD_HAUPPAUGE_HVR1110: |
| configure_tda827x_fe(dev, &hauppauge_hvr_1110_config); |
| break; |
| case SAA7134_BOARD_ASUSTeK_P7131_DUAL: |
| configure_tda827x_fe(dev, &asus_p7131_dual_config); |
| break; |
| case SAA7134_BOARD_FLYDVBT_LR301: |
| configure_tda827x_fe(dev, &tda827x_lifeview_config); |
| break; |
| case SAA7134_BOARD_FLYDVB_TRIO: |
| if(! use_frontend) { //terrestrial |
| configure_tda827x_fe(dev, &lifeview_trio_config); |
| } else { //satellite |
| dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, |
| &dev->i2c_adap, 0) == NULL) { |
| wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); |
| } |
| if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, |
| 0x08, 0, 0) == NULL) { |
| wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); |
| } |
| } |
| } |
| break; |
| case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: |
| case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &ads_tech_duo_config, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| if (dvb_attach(tda827x_attach,dev->dvb.frontend, |
| ads_tech_duo_config.tuner_address, |
| &dev->i2c_adap,&ads_duo_cfg) == NULL) { |
| wprintk("no tda827x tuner found at addr: %02x\n", |
| ads_tech_duo_config.tuner_address); |
| } |
| } |
| break; |
| case SAA7134_BOARD_TEVION_DVBT_220RF: |
| configure_tda827x_fe(dev, &tevion_dvbt220rf_config); |
| break; |
| case SAA7134_BOARD_MEDION_MD8800_QUADRO: |
| configure_tda827x_fe(dev, &md8800_dvbt_config); |
| break; |
| case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: |
| dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, |
| NULL, &dvb_pll_tdhu2); |
| } |
| break; |
| case SAA7134_BOARD_KWORLD_ATSC110: |
| dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, |
| NULL, &dvb_pll_tuv1236d); |
| } |
| break; |
| case SAA7134_BOARD_FLYDVBS_LR300: |
| dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, |
| &dev->i2c_adap, 0) == NULL) { |
| wprintk("%s: No tda826x found!\n", __FUNCTION__); |
| } |
| if (dvb_attach(isl6421_attach, dev->dvb.frontend, |
| &dev->i2c_adap, 0x08, 0, 0) == NULL) { |
| wprintk("%s: No ISL6421 found!\n", __FUNCTION__); |
| } |
| } |
| break; |
| case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: |
| dev->dvb.frontend = tda10046_attach(&medion_cardbus, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; |
| dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; |
| dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init; |
| dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params; |
| } |
| break; |
| case SAA7134_BOARD_VIDEOMATE_DVBT_200A: |
| dev->dvb.frontend = dvb_attach(tda10046_attach, |
| &philips_europa_config, |
| &dev->i2c_adap); |
| if (dev->dvb.frontend) { |
| dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; |
| dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; |
| } |
| break; |
| case SAA7134_BOARD_CINERGY_HT_PCMCIA: |
| configure_tda827x_fe(dev, &cinergy_ht_config); |
| break; |
| case SAA7134_BOARD_CINERGY_HT_PCI: |
| configure_tda827x_fe(dev, &cinergy_ht_pci_config); |
| break; |
| case SAA7134_BOARD_PHILIPS_TIGER_S: |
| configure_tda827x_fe(dev, &philips_tiger_s_config); |
| break; |
| case SAA7134_BOARD_ASUS_P7131_4871: |
| configure_tda827x_fe(dev, &asus_p7131_4871_config); |
| break; |
| case SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA: |
| configure_tda827x_fe(dev, &asus_p7131_dual_lna_config); |
| break; |
| default: |
| wprintk("Huh? unknown DVB card?\n"); |
| break; |
| } |
| |
| if (NULL == dev->dvb.frontend) { |
| printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); |
| return -1; |
| } |
| |
| /* register everything else */ |
| ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev); |
| |
| /* this sequence is necessary to make the tda1004x load its firmware |
| * and to enter analog mode of hybrid boards |
| */ |
| if (!ret) { |
| if (dev->dvb.frontend->ops.init) |
| dev->dvb.frontend->ops.init(dev->dvb.frontend); |
| if (dev->dvb.frontend->ops.sleep) |
| dev->dvb.frontend->ops.sleep(dev->dvb.frontend); |
| } |
| return ret; |
| } |
| |
| static int dvb_fini(struct saa7134_dev *dev) |
| { |
| static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; |
| |
| switch (dev->board) { |
| case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: |
| /* otherwise we don't detect the tuner on next insmod */ |
| saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on); |
| break; |
| }; |
| videobuf_dvb_unregister(&dev->dvb); |
| return 0; |
| } |
| |
| static struct saa7134_mpeg_ops dvb_ops = { |
| .type = SAA7134_MPEG_DVB, |
| .init = dvb_init, |
| .fini = dvb_fini, |
| }; |
| |
| static int __init dvb_register(void) |
| { |
| return saa7134_ts_register(&dvb_ops); |
| } |
| |
| static void __exit dvb_unregister(void) |
| { |
| saa7134_ts_unregister(&dvb_ops); |
| } |
| |
| module_init(dvb_register); |
| module_exit(dvb_unregister); |
| |
| /* ------------------------------------------------------------------ */ |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |