| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NVIDIA Tegra234 Pinmux Controller |
| |
| maintainers: |
| - Thierry Reding <thierry.reding@gmail.com> |
| - Jon Hunter <jonathanh@nvidia.com> |
| |
| $ref: nvidia,tegra-pinmux-common.yaml |
| |
| properties: |
| nvidia,function: |
| enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, |
| eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, |
| pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, |
| sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, |
| usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, |
| i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, |
| dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, |
| ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, |
| displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, |
| tsc_alt, istctrl, vi1_alt, dspk1, igpu ] |
| |
| # out of the common properties, only these are allowed for Tegra234 |
| nvidia,pins: true |
| nvidia,pull: true |
| nvidia,tristate: true |
| nvidia,schmitt: true |
| nvidia,enable-input: true |
| nvidia,open-drain: true |
| nvidia,lock: true |
| nvidia,drive-type: true |
| nvidia,io-hv: true |
| |
| required: |
| - nvidia,pins |
| |
| # We would typically use unevaluatedProperties here but that has the |
| # downside that all the properties in the common bindings become valid |
| # for all chip generations. In this case, however, we want the per-SoC |
| # bindings to be able to override which of the common properties are |
| # allowed, since not all pinmux generations support the same sets of |
| # properties. This way, the common bindings define the format of the |
| # properties but the per-SoC bindings define which of them apply to a |
| # given chip. |
| additionalProperties: false |
| |
| ... |