| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/pfuze100.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: PFUZE100 family of regulators |
| |
| maintainers: |
| - Robin Gong <yibin.gong@nxp.com> |
| |
| description: | |
| The valid names for regulators are: |
| --PFUZE100 |
| sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 |
| --PFUZE200 |
| sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin |
| --PFUZE3000 |
| sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 |
| --PFUZE3001 |
| sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 |
| |
| Each regulator is defined using the standard binding for regulators. |
| |
| properties: |
| $nodename: |
| pattern: "^pmic@[0-9]$" |
| |
| compatible: |
| enum: |
| - fsl,pfuze100 |
| - fsl,pfuze200 |
| - fsl,pfuze3000 |
| - fsl,pfuze3001 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| fsl,pfuze-support-disable-sw: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: | |
| Boolean, if present disable all unused switch regulators to save power |
| consumption. Attention, ensure that all important regulators |
| (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property. |
| If not present, the switched regulators are always on and can't be |
| disabled. This binding is a workaround to keep backward compatibility |
| with old dtb's which rely on the fact that the switched regulators are |
| always on and don't mark them explicit as "regulator-always-on". |
| |
| fsl,pmic-stby-poweroff: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: | |
| if present, configure the PMIC to shutdown all |
| power rails when PMIC_STBY_REQ line is asserted during the power off sequence. |
| Use this option if the SoC should be powered off by external power management |
| IC (PMIC) on PMIC_STBY_REQ signal. |
| As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. |
| |
| regulators: |
| type: object |
| description: | |
| list of regulators provided by this controller. |
| |
| patternProperties: |
| "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": |
| $ref: regulator.yaml# |
| type: object |
| unevaluatedProperties: false |
| |
| "^vgen[1-6]$": |
| $ref: regulator.yaml# |
| type: object |
| unevaluatedProperties: false |
| |
| "^vldo[1-4]$": |
| $ref: regulator.yaml# |
| type: object |
| unevaluatedProperties: false |
| |
| "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": |
| $ref: regulator.yaml# |
| type: object |
| unevaluatedProperties: false |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmic@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
