| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /dts-v1/; |
| |
| #include "msm8916-pm8916.dtsi" |
| #include "msm8916-modem-qdsp6.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| model = "Alcatel OneTouch Idol 3 (4.7)"; |
| compatible = "alcatel,idol347", "qcom,msm8916"; |
| chassis-type = "handset"; |
| |
| aliases { |
| mmc0 = &sdhc_1; /* eMMC */ |
| mmc1 = &sdhc_2; /* SD card */ |
| serial0 = &blsp_uart2; |
| }; |
| |
| chosen { |
| stdout-path = "serial0"; |
| }; |
| |
| reserved-memory { |
| /delete-node/ reserved@86680000; |
| /delete-node/ rmtfs@86700000; |
| |
| rmtfs: rmtfs@86680000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0x86680000 0x0 0x160000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_default>; |
| |
| label = "GPIO Buttons"; |
| |
| button-volume-up { |
| label = "Volume Up"; |
| gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_leds_default>; |
| |
| led-0 { |
| gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "torch"; |
| function = LED_FUNCTION_TORCH; |
| }; |
| }; |
| |
| reg_headphones_avdd: regulator-headphones-avdd { |
| compatible = "regulator-fixed"; |
| regulator-name = "headphones_avdd"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| pinctrl-0 = <&headphones_avdd_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| usb_id: usb-id { |
| compatible = "linux,extcon-usb-gpio"; |
| id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_id_default>; |
| }; |
| }; |
| |
| &blsp_i2c3 { |
| status = "okay"; |
| |
| headphones: audio-codec@10 { |
| compatible = "asahi-kasei,ak4375"; |
| reg = <0x10>; |
| avdd-supply = <®_headphones_avdd>; |
| tvdd-supply = <&pm8916_l6>; |
| pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; |
| pinctrl-0 = <&headphones_pdn_default>; |
| pinctrl-names = "default"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| speaker_codec_top: audio-codec@34 { |
| compatible = "nxp,tfa9897"; |
| reg = <0x34>; |
| vddd-supply = <&pm8916_l6>; |
| rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; |
| pinctrl-0 = <&speaker_top_default>; |
| pinctrl-names = "default"; |
| sound-name-prefix = "Speaker Top"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| speaker_codec_bottom: audio-codec@36 { |
| compatible = "nxp,tfa9897"; |
| reg = <0x36>; |
| vddd-supply = <&pm8916_l6>; |
| rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>; |
| pinctrl-0 = <&speaker_bottom_default>; |
| pinctrl-names = "default"; |
| sound-name-prefix = "Speaker Bottom"; |
| #sound-dai-cells = <0>; |
| }; |
| }; |
| |
| &blsp_i2c4 { |
| status = "okay"; |
| |
| touchscreen@26 { |
| compatible = "mstar,msg2638"; |
| reg = <0x26>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ts_int_reset_default>; |
| vdd-supply = <&pm8916_l17>; |
| vddio-supply = <&pm8916_l5>; |
| touchscreen-size-x = <2048>; |
| touchscreen-size-y = <2048>; |
| }; |
| }; |
| |
| &blsp_i2c5 { |
| status = "okay"; |
| |
| magnetometer@c { |
| compatible = "asahi-kasei,ak09911"; |
| reg = <0x0c>; |
| vdd-supply = <&pm8916_l17>; |
| vid-supply = <&pm8916_l6>; |
| reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mag_reset_default>; |
| mount-matrix = "0", "1", "0", |
| "-1", "0", "0", |
| "0", "0", "1"; |
| }; |
| |
| accelerometer@f { |
| compatible = "kionix,kxtj21009"; |
| reg = <0x0f>; |
| vdd-supply = <&pm8916_l17>; |
| vddio-supply = <&pm8916_l6>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <31 IRQ_TYPE_EDGE_RISING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&accel_int_default>; |
| mount-matrix = "-1", "0", "0", |
| "0", "1", "0", |
| "0", "0", "-1"; |
| }; |
| |
| proximity@48 { |
| compatible = "sensortek,stk3310"; |
| reg = <0x48>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <12 IRQ_TYPE_EDGE_FALLING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&proximity_int_default>; |
| }; |
| |
| gyroscope@68 { |
| compatible = "bosch,bmg160"; |
| reg = <0x68>; |
| vdd-supply = <&pm8916_l17>; |
| vddio-supply = <&pm8916_l6>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <97 IRQ_TYPE_EDGE_RISING>, |
| <98 IRQ_TYPE_EDGE_RISING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gyro_int_default>; |
| }; |
| }; |
| |
| &blsp_i2c6 { |
| status = "okay"; |
| |
| led-controller@68 { |
| compatible = "si-en,sn3190"; |
| reg = <0x68>; |
| shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&led_enable_default &led_shutdown_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@1 { |
| reg = <1>; |
| led-max-microamp = <5000>; |
| function = LED_FUNCTION_INDICATOR; |
| color = <LED_COLOR_ID_WHITE>; |
| }; |
| }; |
| }; |
| |
| &blsp_uart2 { |
| status = "okay"; |
| }; |
| |
| &mpss_mem { |
| reg = <0x0 0x86800000 0x0 0x5000000>; |
| }; |
| |
| &pm8916_codec { |
| qcom,micbias1-ext-cap; |
| qcom,micbias-lvl = <2800>; |
| qcom,mbhc-vthreshold-low = <75 100 120 180 500>; |
| qcom,mbhc-vthreshold-high = <75 100 120 180 500>; |
| qcom,hphl-jack-type-normally-open; |
| }; |
| |
| &pm8916_resin { |
| status = "okay"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| &pm8916_rpm_regulators { |
| pm8916_l17: l17 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| }; |
| }; |
| |
| &pm8916_vib { |
| status = "okay"; |
| }; |
| |
| &q6afedai { |
| dai@18 { |
| reg = <SECONDARY_MI2S_RX>; |
| qcom,sd-lines = <0>; |
| }; |
| dai@22 { |
| reg = <QUATERNARY_MI2S_RX>; |
| qcom,sd-lines = <0>; |
| }; |
| }; |
| |
| &sdhc_1 { |
| status = "okay"; |
| }; |
| |
| &sdhc_2 { |
| status = "okay"; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| |
| cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &sound { |
| /* Add pin switches for speakers to allow disabling them individually */ |
| model = "alcatel-idol3"; |
| widgets = |
| "Speaker", "Speaker Top", |
| "Speaker", "Speaker Bottom"; |
| pin-switches = "Speaker Top", "Speaker Bottom"; |
| audio-routing = |
| "Speaker Top", "Speaker Top OUT", |
| "Speaker Bottom", "Speaker Bottom OUT", |
| "AMIC1", "MIC BIAS External1", |
| "AMIC2", "MIC BIAS Internal2", |
| "AMIC3", "MIC BIAS External1"; |
| |
| pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>; |
| pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>; |
| pinctrl-names = "default", "sleep"; |
| |
| sound_link_backend2: backend2-dai-link { |
| link-name = "Quaternary MI2S"; |
| |
| cpu { |
| sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; |
| }; |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| codec { |
| sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>; |
| }; |
| }; |
| }; |
| |
| &sound_link_backend0 { |
| /* Primary MI2S is not used, replace with Secondary MI2S for headphones */ |
| link-name = "Secondary MI2S"; |
| |
| cpu { |
| sound-dai = <&q6afedai SECONDARY_MI2S_RX>; |
| }; |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| codec { |
| sound-dai = <&headphones>; |
| }; |
| }; |
| |
| &usb { |
| status = "okay"; |
| extcon = <&usb_id>, <&usb_id>; |
| }; |
| |
| &usb_hs_phy { |
| extcon = <&usb_id>; |
| }; |
| |
| &venus { |
| status = "okay"; |
| }; |
| |
| &venus_mem { |
| status = "okay"; |
| }; |
| |
| &wcnss { |
| status = "okay"; |
| }; |
| |
| &wcnss_iris { |
| compatible = "qcom,wcn3620"; |
| }; |
| |
| &wcnss_mem { |
| status = "okay"; |
| }; |
| |
| /* Only some of the pins are used */ |
| &pri_mi2s_default { |
| pins = "gpio113", "gpio115"; |
| }; |
| |
| &pri_mi2s_sleep { |
| pins = "gpio113", "gpio115"; |
| }; |
| |
| &tlmm { |
| accel_int_default: accel-int-default-state { |
| pins = "gpio31"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| gpio_keys_default: gpio-keys-default-state { |
| pins = "gpio107"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| gpio_leds_default: gpio-leds-default-state { |
| pins = "gpio32"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| gyro_int_default: gyro-int-default-state { |
| pins = "gpio97", "gpio98"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| headphones_avdd_default: headphones-avdd-default-state { |
| pins = "gpio121"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| headphones_pdn_default: headphones-pdn-default-state { |
| pins = "gpio114"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| /* |
| * The OEM wired an additional GPIO to be asserted so that |
| * the si-en,sn3190 LED IC works. Since this GPIO is not |
| * part of the IC datasheet nor supported by the driver, |
| * force it asserted here. |
| */ |
| led_enable_default: led-enable-default-state { |
| pins = "gpio102"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| output-high; |
| }; |
| |
| led_shutdown_default: led-shutdown-default-state { |
| pins = "gpio89"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| mag_reset_default: mag-reset-default-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| proximity_int_default: proximity-int-default-state { |
| pins = "gpio12"; |
| function = "gpio"; |
| |
| drive-strength = <6>; |
| bias-pull-up; |
| }; |
| |
| sdc2_cd_default: sdc2-cd-default-state { |
| pins = "gpio38"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| speaker_bottom_default: speaker-bottom-default-state { |
| pins = "gpio111"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| speaker_top_default: speaker-top-default-state { |
| pins = "gpio50"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| ts_int_reset_default: ts-int-reset-default-state { |
| pins = "gpio13", "gpio100"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| usb_id_default: usb-id-default-state { |
| pins = "gpio69"; |
| function = "gpio"; |
| |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| }; |
