blob: b748d140b52e9578b7c66dd7f9518145d5739af4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "GPLUS FL8005A";
compatible = "gplus,fl8005a", "qcom,msm8916";
chassis-type = "tablet";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
chosen {
stdout-path = "serial0";
};
flash-led-controller {
/* Actually qcom,leds-gpio-flash */
compatible = "sgmicro,sgm3140";
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&camera_flash_default>;
pinctrl-names = "default";
flash_led: led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
flash-max-timeout-us = <250000>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_keys_default>;
pinctrl-names = "default";
button-volume-up {
label = "Volume Up";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&gpio_leds_default>;
pinctrl-names = "default";
led-red {
function = LED_FUNCTION_CHARGING;
color = <LED_COLOR_ID_RED>;
gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
};
led-green {
function = LED_FUNCTION_CHARGING;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&usb_id_default>;
pinctrl-names = "default";
};
};
&blsp_i2c5 {
status = "okay";
touchscreen@38 {
/* Actually ft5402 */
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
vcc-supply = <&pm8916_l17>;
iovcc-supply = <&pm8916_l6>;
touchscreen-size-x = <800>;
touchscreen-size-y = <500>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
pinctrl-0 = <&touchscreen_default>;
pinctrl-names = "default";
};
};
&blsp_uart2 {
status = "okay";
};
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
};
&pm8916_vib {
status = "okay";
};
&sdhc_1 {
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usb {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&venus {
status = "okay";
};
&venus_mem {
status = "okay";
};
&wcnss {
status = "okay";
};
&wcnss_iris {
compatible = "qcom,wcn3620";
};
&wcnss_mem {
status = "okay";
};
&tlmm {
camera_flash_default: camera-flash-default-state {
pins = "gpio31", "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
gpio_leds_default: gpio-led-default-state {
pins = "gpio117", "gpio118";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
touchscreen_default: touchscreen-default-state {
reset-pins {
pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
touchscreen-pins {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
usb_id_default: usb-id-default-state {
pins = "gpio110";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};