blob: cedff4166bfb9f1f3af68404cad606425d56ce2b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/arm/coresight-cti-dt.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0x80000000 0 0>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tz-apps@86000000 {
reg = <0x0 0x86000000 0x0 0x300000>;
no-map;
};
smem@86300000 {
compatible = "qcom,smem";
reg = <0x0 0x86300000 0x0 0x100000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
};
hypervisor@86400000 {
reg = <0x0 0x86400000 0x0 0x100000>;
no-map;
};
tz@86500000 {
reg = <0x0 0x86500000 0x0 0x180000>;
no-map;
};
reserved@86680000 {
reg = <0x0 0x86680000 0x0 0x80000>;
no-map;
};
rmtfs@86700000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x86700000 0x0 0xe0000>;
no-map;
qcom,client-id = <1>;
};
rfsa@867e0000 {
reg = <0x0 0x867e0000 0x0 0x20000>;
no-map;
};
mpss_mem: mpss@86800000 {
/*
* The memory region for the mpss firmware is generally
* relocatable and could be allocated dynamically.
* However, many firmware versions tend to fail when
* loaded to some special addresses, so it is hard to
* define reliable alloc-ranges.
*
* alignment = <0x0 0x400000>;
* alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
*/
reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
no-map;
status = "disabled";
};
wcnss_mem: wcnss {
size = <0x0 0x600000>;
alignment = <0x0 0x100000>;
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
no-map;
status = "disabled";
};
venus_mem: venus {
size = <0x0 0x500000>;
alignment = <0x0 0x100000>;
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
no-map;
status = "disabled";
};
mba_mem: mba {
size = <0x0 0x100000>;
alignment = <0x0 0x100000>;
alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
no-map;
status = "disabled";
};
};
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
qcom,acc = <&cpu0_acc>;
qcom,saw = <&cpu0_saw>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
next-level-cache = <&L2_0>;
enable-method = "psci";
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
qcom,acc = <&cpu1_acc>;
qcom,saw = <&cpu1_saw>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
next-level-cache = <&L2_0>;
enable-method = "psci";
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
qcom,acc = <&cpu2_acc>;
qcom,saw = <&cpu2_saw>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
next-level-cache = <&L2_0>;
enable-method = "psci";
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
qcom,acc = <&cpu3_acc>;
qcom,saw = <&cpu3_saw>;
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
idle-states {
entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
idle-state-name = "standalone-power-collapse";
arm,psci-suspend-param = <0x40000002>;
entry-latency-us = <130>;
exit-latency-us = <150>;
min-residency-us = <2000>;
local-timer-stop;
};
};
domain-idle-states {
CLUSTER_RET: cluster-retention {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000012>;
entry-latency-us = <500>;
exit-latency-us = <500>;
min-residency-us = <2000>;
};
CLUSTER_PWRDN: cluster-gdhs {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000032>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
};
};
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
};
opp-998400000 {
opp-hz = /bits/ 64 <998400000>;
};
};
firmware {
scm: scm {
compatible = "qcom,scm-msm8916", "qcom,scm";
clocks = <&gcc GCC_CRYPTO_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
#reset-cells = <1>;
qcom,dload-mode = <&tcsr 0x6100>;
};
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP_0>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP_0>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP_0>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&CPU_SLEEP_0>;
};
CLUSTER_PD: power-domain-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
};
};
rpm: remoteproc {
compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8916";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,msm8916-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <1>;
};
rpmpd_opp_svs_krait: opp2 {
opp-level = <2>;
};
rpmpd_opp_svs_soc: opp3 {
opp-level = <3>;
};
rpmpd_opp_nom: opp4 {
opp-level = <4>;
};
rpmpd_opp_turbo: opp5 {
opp-level = <5>;
};
rpmpd_opp_super_turbo: opp6 {
opp-level = <6>;
};
};
};
};
};
};
smp2p-hexagon {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
hexagon_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
hexagon_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-wcnss {
compatible = "qcom,smp2p";
qcom,smem = <451>, <431>;
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
qcom,local-pid = <0>;
qcom,remote-pid = <4>;
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smsm {
compatible = "qcom,smsm";
#address-cells = <1>;
#size-cells = <0>;
qcom,ipc-1 = <&apcs 8 13>;
qcom,ipc-3 = <&apcs 8 19>;
apps_smsm: apps@0 {
reg = <0>;
#qcom,smem-state-cells = <1>;
};
hexagon_smsm: hexagon@1 {
reg = <1>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
wcnss_smsm: wcnss@6 {
reg = <6>;
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
rng@22000 {
compatible = "qcom,prng";
reg = <0x00022000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x004ab000 0x4>;
};
qfprom: qfprom@5c000 {
compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
reg = <0x0005c000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
tsens_base1: base1@d0 {
reg = <0xd0 0x1>;
bits = <0 7>;
};
tsens_s0_p1: s0-p1@d0 {
reg = <0xd0 0x2>;
bits = <7 5>;
};
tsens_s0_p2: s0-p2@d1 {
reg = <0xd1 0x2>;
bits = <4 5>;
};
tsens_s1_p1: s1-p1@d2 {
reg = <0xd2 0x1>;
bits = <1 5>;
};
tsens_s1_p2: s1-p2@d2 {
reg = <0xd2 0x2>;
bits = <6 5>;
};
tsens_s2_p1: s2-p1@d3 {
reg = <0xd3 0x1>;
bits = <3 5>;
};
tsens_s2_p2: s2-p2@d4 {
reg = <0xd4 0x1>;
bits = <0 5>;
};
// no tsens with hw_id 3
tsens_s4_p1: s4-p1@d4 {
reg = <0xd4 0x2>;
bits = <5 5>;
};
tsens_s4_p2: s4-p2@d5 {
reg = <0xd5 0x1>;
bits = <2 5>;
};
tsens_s5_p1: s5-p1@d5 {
reg = <0xd5 0x2>;
bits = <7 5>;
};
tsens_s5_p2: s5-p2@d6 {
reg = <0xd6 0x2>;
bits = <4 5>;
};
tsens_base2: base2@d7 {
reg = <0xd7 0x1>;
bits = <1 7>;
};
tsens_mode: mode@ef {
reg = <0xef 0x1>;
bits = <5 3>;
};
};
rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x8000>;
};
sram@290000 {
compatible = "qcom,msm8916-rpm-stats";
reg = <0x00290000 0x10000>;
};
bimc: interconnect@400000 {
compatible = "qcom,msm8916-bimc";
reg = <0x00400000 0x62000>;
#interconnect-cells = <1>;
};
tsens: thermal-sensor@4a9000 {
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
reg = <0x004a9000 0x1000>, /* TM */
<0x004a8000 0x1000>; /* SROT */
// no hw_id 3
nvmem-cells = <&tsens_mode>,
<&tsens_base1>, <&tsens_base2>,
<&tsens_s0_p1>, <&tsens_s0_p2>,
<&tsens_s1_p1>, <&tsens_s1_p2>,
<&tsens_s2_p1>, <&tsens_s2_p2>,
<&tsens_s4_p1>, <&tsens_s4_p2>,
<&tsens_s5_p1>, <&tsens_s5_p2>;
nvmem-cell-names = "mode",
"base1", "base2",
"s0_p1", "s0_p2",
"s1_p1", "s1_p2",
"s2_p1", "s2_p2",
"s4_p1", "s4_p2",
"s5_p1", "s5_p2";
#qcom,sensors = <5>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
pcnoc: interconnect@500000 {
compatible = "qcom,msm8916-pcnoc";
reg = <0x00500000 0x11000>;
#interconnect-cells = <1>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8916-snoc";
reg = <0x00580000 0x14000>;
#interconnect-cells = <1>;
};
stm: stm@802000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x00802000 0x1000>,
<0x09280000 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
out-ports {
port {
stm_out: endpoint {
remote-endpoint = <&funnel0_in7>;
};
};
};
};
/* System CTIs */
/* CTI 0 - TMC connections */
cti0: cti@810000 {
compatible = "arm,coresight-cti", "arm,primecell";
reg = <0x00810000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
status = "disabled";
};
/* CTI 1 - TPIU connections */
cti1: cti@811000 {
compatible = "arm,coresight-cti", "arm,primecell";
reg = <0x00811000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
status = "disabled";
};
/* CTIs 2-11 - no information - not instantiated */
tpiu: tpiu@820000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0x00820000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
in-ports {
port {
tpiu_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
};
};
};
funnel0: funnel@821000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x00821000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Not described input ports:
* 0 - connected to Resource and Power Manger CPU ETM
* 1 - not-connected
* 2 - connected to Modem CPU ETM
* 3 - not-connected
* 5 - not-connected
* 6 - connected trought funnel to Wireless CPU ETM
* 7 - connected to STM component
*/
port@4 {
reg = <4>;
funnel0_in4: endpoint {
remote-endpoint = <&funnel1_out>;
};
};
port@7 {
reg = <7>;
funnel0_in7: endpoint {
remote-endpoint = <&stm_out>;
};
};
};
out-ports {
port {
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
};
};
};
};
replicator: replicator@824000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0x00824000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
out-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint = <&etr_in>;
};
};
port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint = <&tpiu_in>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
etf: etf@825000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x00825000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
in-ports {
port {
etf_in: endpoint {
remote-endpoint = <&funnel0_out>;
};
};
};
out-ports {
port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
};
};
etr: etr@826000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x00826000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
in-ports {
port {
etr_in: endpoint {
remote-endpoint = <&replicator_out0>;
};
};
};
};
funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x00841000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
status = "disabled";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
};
out-ports {
port {
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
};
};
};
};
debug0: debug@850000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x00850000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
status = "disabled";
};
debug1: debug@852000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x00852000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
status = "disabled";
};
debug2: debug@854000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x00854000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
status = "disabled";
};
debug3: debug@856000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x00856000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
status = "disabled";
};
/* Core CTIs; CTIs 12-15 */
/* CTI - CPU-0 */
cti12: cti@858000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x00858000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
arm,cs-dev-assoc = <&etm0>;
status = "disabled";
};
/* CTI - CPU-1 */
cti13: cti@859000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x00859000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
arm,cs-dev-assoc = <&etm1>;
status = "disabled";
};
/* CTI - CPU-2 */
cti14: cti@85a000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x0085a000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
arm,cs-dev-assoc = <&etm2>;
status = "disabled";
};
/* CTI - CPU-3 */
cti15: cti@85b000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
reg = <0x0085b000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
arm,cs-dev-assoc = <&etm3>;
status = "disabled";
};
etm0: etm@85c000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x0085c000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
arm,coresight-loses-context-with-cpu;
cpu = <&CPU0>;
status = "disabled";
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&funnel1_in0>;
};
};
};
};
etm1: etm@85d000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x0085d000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
arm,coresight-loses-context-with-cpu;
cpu = <&CPU1>;
status = "disabled";
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&funnel1_in1>;
};
};
};
};
etm2: etm@85e000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x0085e000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
arm,coresight-loses-context-with-cpu;
cpu = <&CPU2>;
status = "disabled";
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&funnel1_in2>;
};
};
};
};
etm3: etm@85f000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x0085f000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
arm,coresight-loses-context-with-cpu;
cpu = <&CPU3>;
status = "disabled";
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&funnel1_in3>;
};
};
};
};
tlmm: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 122>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp_i2c1_default: blsp-i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp_i2c1_sleep: blsp-i2c1-sleep-state {
pins = "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_i2c2_default: blsp-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp_i2c2_sleep: blsp-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_i2c3_default: blsp-i2c3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp_i2c3_sleep: blsp-i2c3-sleep-state {
pins = "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_i2c4_default: blsp-i2c4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
blsp_i2c4_sleep: blsp-i2c4-sleep-state {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_i2c5_default: blsp-i2c5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
blsp_i2c5_sleep: blsp-i2c5-sleep-state {
pins = "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_i2c6_default: blsp-i2c6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
blsp_i2c6_sleep: blsp-i2c6-sleep-state {
pins = "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp_spi1_default: blsp-spi1-default-state {
spi-pins {
pins = "gpio0", "gpio1", "gpio3";
function = "blsp_spi1";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio2";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi1_sleep: blsp-spi1-sleep-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_spi2_default: blsp-spi2-default-state {
spi-pins {
pins = "gpio4", "gpio5", "gpio7";
function = "blsp_spi2";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio6";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi2_sleep: blsp-spi2-sleep-state {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_spi3_default: blsp-spi3-default-state {
spi-pins {
pins = "gpio8", "gpio9", "gpio11";
function = "blsp_spi3";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio10";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi3_sleep: blsp-spi3-sleep-state {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_spi4_default: blsp-spi4-default-state {
spi-pins {
pins = "gpio12", "gpio13", "gpio15";
function = "blsp_spi4";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio14";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi4_sleep: blsp-spi4-sleep-state {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_spi5_default: blsp-spi5-default-state {
spi-pins {
pins = "gpio16", "gpio17", "gpio19";
function = "blsp_spi5";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio18";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi5_sleep: blsp-spi5-sleep-state {
pins = "gpio16", "gpio17", "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_spi6_default: blsp-spi6-default-state {
spi-pins {
pins = "gpio20", "gpio21", "gpio23";
function = "blsp_spi6";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio22";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-high;
};
};
blsp_spi6_sleep: blsp-spi6-sleep-state {
pins = "gpio20", "gpio21", "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_uart1_default: blsp-uart1-default-state {
/* TX, RX, CTS_N, RTS_N */
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "blsp_uart1";
drive-strength = <16>;
bias-disable;
};
blsp_uart1_sleep: blsp-uart1-sleep-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
blsp_uart2_default: blsp-uart2-default-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <16>;
bias-disable;
};
blsp_uart2_sleep: blsp-uart2-sleep-state {
pins = "gpio4", "gpio5";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
camera_front_default: camera-front-default-state {
pwdn-pins {
pins = "gpio33";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
rst-pins {
pins = "gpio28";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
mclk1-pins {
pins = "gpio27";
function = "cam_mclk1";
drive-strength = <16>;
bias-disable;
};
};
camera_rear_default: camera-rear-default-state {
pwdn-pins {
pins = "gpio34";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
rst-pins {
pins = "gpio35";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
mclk0-pins {
pins = "gpio26";
function = "cam_mclk0";
drive-strength = <16>;
bias-disable;
};
};
cci0_default: cci0-default-state {
pins = "gpio29", "gpio30";
function = "cci_i2c";
drive-strength = <16>;
bias-disable;
};
cdc_dmic_default: cdc-dmic-default-state {
clk-pins {
pins = "gpio0";
function = "dmic0_clk";
drive-strength = <8>;
};
data-pins {
pins = "gpio1";
function = "dmic0_data";
drive-strength = <8>;
};
};
cdc_dmic_sleep: cdc-dmic-sleep-state {
clk-pins {
pins = "gpio0";
function = "dmic0_clk";
drive-strength = <2>;
bias-disable;
};
data-pins {
pins = "gpio1";
function = "dmic0_data";
drive-strength = <2>;
bias-disable;
};
};
cdc_pdm_default: cdc-pdm-default-state {
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
function = "cdc_pdm0";
drive-strength = <8>;
bias-disable;
};
cdc_pdm_sleep: cdc-pdm-sleep-state {
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
function = "cdc_pdm0";
drive-strength = <2>;
bias-pull-down;
};
pri_mi2s_default: mi2s-pri-default-state {
pins = "gpio113", "gpio114", "gpio115", "gpio116";
function = "pri_mi2s";
drive-strength = <8>;
bias-disable;
};
pri_mi2s_sleep: mi2s-pri-sleep-state {
pins = "gpio113", "gpio114", "gpio115", "gpio116";
function = "pri_mi2s";
drive-strength = <2>;
bias-disable;
};
pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
pins = "gpio116";
function = "pri_mi2s";
drive-strength = <8>;
bias-disable;
};
pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
pins = "gpio116";
function = "pri_mi2s";
drive-strength = <2>;
bias-disable;
};
pri_mi2s_ws_default: mi2s-pri-ws-default-state {
pins = "gpio110";
function = "pri_mi2s_ws";
drive-strength = <8>;
bias-disable;
};
pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
pins = "gpio110";
function = "pri_mi2s_ws";
drive-strength = <2>;
bias-disable;
};
sec_mi2s_default: mi2s-sec-default-state {
pins = "gpio112", "gpio117", "gpio118", "gpio119";
function = "sec_mi2s";
drive-strength = <8>;
bias-disable;
};
sec_mi2s_sleep: mi2s-sec-sleep-state {
pins = "gpio112", "gpio117", "gpio118", "gpio119";
function = "sec_mi2s";
drive-strength = <2>;
bias-disable;
};
sdc1_default: sdc1-default-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
};
sdc1_sleep: sdc1-sleep-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_default: sdc2-default-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
sdc2_sleep: sdc2-sleep-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
};
wcss_wlan_default: wcss-wlan-default-state {
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
function = "wcss_wlan";
drive-strength = <6>;
bias-pull-up;
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x01800000 0x80000>;
clocks = <&xo_board>,
<&sleep_clk>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi0_phy 0>,
<0>,
<0>,
<0>;
clock-names = "xo",
"sleep_clk",
"dsi0pll",
"dsi0pllbyte",
"ext_mclk",
"ext_pri_i2s",
"ext_sec_i2s";
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-msm8916", "syscon";
reg = <0x01937000 0x30000>;
};
mdss: display-subsystem@1a00000 {
status = "disabled";
compatible = "qcom,mdss";
reg = <0x01a00000 0x1000>,
<0x01ac8000 0x3000>;
reg-names = "mdss_phys", "vbif_phys";
power-domains = <&gcc MDSS_GDSC>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"vsync";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
mdss_mdp: display-controller@1a01000 {
compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"core",
"vsync";
iommus = <&apps_iommu 4>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_mdp_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
};
};
mdss_dsi0: dsi@1a98000 {
compatible = "qcom,msm8916-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x01a98000 0x25c>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_BYTE0_CLK>,
<&gcc GCC_MDSS_PCLK0_CLK>,
<&gcc GCC_MDSS_ESC0_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core";
phys = <&mdss_dsi0_phy>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&mdss_mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
};
mdss_dsi0_phy: phy@1a98300 {
compatible = "qcom,dsi-phy-28nm-lp";
reg = <0x01a98300 0xd4>,
<0x01a98500 0x280>,
<0x01a98780 0x30>;
reg-names = "dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&xo_board>;
clock-names = "iface", "ref";
};
};
camss: camss@1b0ac00 {
compatible = "qcom,msm8916-camss";
reg = <0x01b0ac00 0x200>,
<0x01b00030 0x4>,
<0x01b0b000 0x200>,
<0x01b00038 0x4>,
<0x01b08000 0x100>,
<0x01b08400 0x100>,
<0x01b0a000 0x500>,
<0x01b00020 0x10>,
<0x01b10000 0x1000>;
reg-names = "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
"csiphy1_clk_mux",
"csid0",
"csid1",
"ispif",
"csi_clk_mux",
"vfe0";
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "csiphy0",
"csiphy1",
"csid0",
"csid1",
"ispif",
"vfe0";
power-domains = <&gcc VFE_GDSC>;
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
<&gcc GCC_CAMSS_CSI0_CLK>,
<&gcc GCC_CAMSS_CSI0PHY_CLK>,
<&gcc GCC_CAMSS_CSI0PIX_CLK>,
<&gcc GCC_CAMSS_CSI0RDI_CLK>,
<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
<&gcc GCC_CAMSS_CSI1_CLK>,
<&gcc GCC_CAMSS_CSI1PHY_CLK>,
<&gcc GCC_CAMSS_CSI1PIX_CLK>,
<&gcc GCC_CAMSS_CSI1RDI_CLK>,
<&gcc GCC_CAMSS_AHB_CLK>,
<&gcc GCC_CAMSS_VFE0_CLK>,
<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
<&gcc GCC_CAMSS_VFE_AHB_CLK>,
<&gcc GCC_CAMSS_VFE_AXI_CLK>;
clock-names = "top_ahb",
"ispif_ahb",
"csiphy0_timer",
"csiphy1_timer",
"csi0_ahb",
"csi0",
"csi0_phy",
"csi0_pix",
"csi0_rdi",
"csi1_ahb",
"csi1",
"csi1_phy",
"csi1_pix",
"csi1_rdi",
"ahb",
"vfe0",
"csi_vfe0",
"vfe_ahb",
"vfe_axi";
iommus = <&apps_iommu 3>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
};
};
};
cci: cci@1b0c000 {
compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x01b0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
<&gcc GCC_CAMSS_CCI_AHB_CLK>,
<&gcc GCC_CAMSS_CCI_CLK>,
<&gcc GCC_CAMSS_AHB_CLK>;
clock-names = "camss_top_ahb", "cci_ahb",
"cci", "camss_ahb";
assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
<&gcc GCC_CAMSS_CCI_CLK>;
assigned-clock-rates = <80000000>, <19200000>;
pinctrl-names = "default";
pinctrl-0 = <&cci0_default>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
gpu: gpu@1c00000 {
compatible = "qcom,adreno-306.0", "qcom,adreno";
reg = <0x01c00000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
"core",
"iface",
"mem",
"mem_iface",
"alt_mem_iface",
"gfx3d";
clocks =
<&gcc GCC_OXILI_GFX3D_CLK>,
<&gcc GCC_OXILI_AHB_CLK>,
<&gcc GCC_OXILI_GMEM_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_BIMC_GPU_CLK>,
<&gcc GFX3D_CLK_SRC>;
power-domains = <&gcc OXILI_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
#cooling-cells = <2>;
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
};
};
};
venus: video-codec@1d00000 {
compatible = "qcom,msm8916-venus";
reg = <0x01d00000 0xff000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&gcc VENUS_GDSC>;
clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
<&gcc GCC_VENUS0_AHB_CLK>,
<&gcc GCC_VENUS0_AXI_CLK>;
clock-names = "core", "iface", "bus";
iommus = <&apps_iommu 5>;
memory-region = <&venus_mem>;
status = "disabled";
video-decoder {
compatible = "venus-decoder";
};
video-encoder {
compatible = "venus-encoder";
};
};
apps_iommu: iommu@1ef0000 {
#address-cells = <1>;
#size-cells = <1>;
#iommu-cells = <1>;
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
ranges = <0 0x01e20000 0x20000>;
reg = <0x01ef0000 0x3000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_APSS_TCU_CLK>;
clock-names = "iface", "bus";
qcom,iommu-secure-id = <17>;
/* VFE */
iommu-ctx@3000 {
compatible = "qcom,msm-iommu-v1-sec";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
};
/* MDP_0 */
iommu-ctx@4000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x4000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
};
/* VENUS_NS */
iommu-ctx@5000 {
compatible = "qcom,msm-iommu-v1-sec";
reg = <0x5000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpu_iommu: iommu@1f08000 {
#address-cells = <1>;
#size-cells = <1>;
#iommu-cells = <1>;
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
ranges = <0 0x01f08000 0x10000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_GFX_TCU_CLK>;
clock-names = "iface", "bus";
qcom,iommu-secure-id = <18>;
/* GFX3D_USER */
iommu-ctx@1000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
};
/* GFX3D_PRIV */
iommu-ctx@2000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
<0x02400000 0x400000>,
<0x02c00000 0x400000>,
<0x03800000 0x200000>,
<0x0200a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
bam_dmux_dma: dma-controller@4044000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x04044000 0x19000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
num-channels = <6>;
qcom,num-ees = <1>;
qcom,powered-remotely;
status = "disabled";
};
mpss: remoteproc@4080000 {
compatible = "qcom,msm8916-mss-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
<&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
power-domains = <&rpmpd MSM8916_VDDCX>,
<&rpmpd MSM8916_VDDMX>;
power-domain-names = "cx", "mx";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>,
<&xo_board>;
clock-names = "iface", "bus", "mem", "xo";
qcom,smem-states = <&hexagon_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&scm 0>;
reset-names = "mss_restart";
qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
status = "disabled";
mba {
memory-region = <&mba_mem>;
};
mpss {
memory-region = <&mpss_mem>;
};
bam_dmux: bam-dmux {
compatible = "qcom,bam-dmux";
interrupt-parent = <&hexagon_smsm>;
interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "pc", "pc-ack";
qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
qcom,smem-state-names = "pc", "pc-ack";
dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
dma-names = "tx", "rx";
status = "disabled";
};
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,smd-edge = <0>;
qcom,ipc = <&apcs 8 12>;
qcom,remote-pid = <1>;
label = "hexagon";
apr: apr {
compatible = "qcom,apr-v2";
qcom,smd-channels = "apr_audio_svc";
qcom,domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
q6core: service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
q6afe: service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
q6afedai: dais {
compatible = "qcom,q6afe-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
};
};
q6asm: service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
};
};
q6adm: service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};
};
fastrpc {
compatible = "qcom,fastrpc";
qcom,smd-channels = "fastrpcsmd-apps-dsp";
label = "adsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
};
};
};
};
sound: sound@7702000 {
status = "disabled";
compatible = "qcom,apq8016-sbc-sndcard";
reg = <0x07702000 0x4>, <0x07702004 0x4>;
reg-names = "mic-iomux", "spkr-iomux";
};
lpass: audio-controller@7708000 {
status = "disabled";
compatible = "qcom,apq8016-lpass-cpu";
/*
* Note: Unlike the name would suggest, the SEC_I2S_CLK
* is actually only used by Tertiary MI2S while
* Primary/Secondary MI2S both use the PRI_I2S_CLK.
*/
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
clock-names = "ahbix-clk",
"mi2s-bit-clk0",
"mi2s-bit-clk1",
"mi2s-bit-clk2",
"mi2s-bit-clk3",
"pcnoc-mport-clk",
"pcnoc-sway-clk";
#sound-dai-cells = <1>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "lpass-irq-lpaif";
reg = <0x07708000 0x10000>;
reg-names = "lpass-lpaif";
#address-cells = <1>;
#size-cells = <0>;
};
lpass_codec: audio-codec@771c000 {
compatible = "qcom,msm8916-wcd-digital-codec";
reg = <0x0771c000 0x400>;
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
<&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "ahbix-clk", "mclk";
#sound-dai-cells = <1>;
status = "disabled";
};
sdhc_1: mmc@7824900 {
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
pinctrl-0 = <&sdc1_default>;
pinctrl-1 = <&sdc1_sleep>;
pinctrl-names = "default", "sleep";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
status = "disabled";
};
sdhc_2: mmc@7864900 {
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
pinctrl-0 = <&sdc2_default>;
pinctrl-1 = <&sdc2_sleep>;
pinctrl-names = "default", "sleep";
bus-width = <4>;
status = "disabled";
};
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
};
blsp_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 0>, <&blsp_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_uart1_default>;
pinctrl-1 = <&blsp_uart1_sleep>;
status = "disabled";
};
blsp_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 2>, <&blsp_dma 3>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_uart2_default>;
pinctrl-1 = <&blsp_uart2_sleep>;
status = "disabled";
};
blsp_i2c1: i2c@78b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b5000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c1_default>;
pinctrl-1 = <&blsp_i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi1_default>;
pinctrl-1 = <&blsp_spi1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 6>, <&blsp_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c2_default>;
pinctrl-1 = <&blsp_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi2: spi@78b6000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b6000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 6>, <&blsp_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi2_default>;
pinctrl-1 = <&blsp_spi2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c3: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x500>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 8>, <&blsp_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c3_default>;
pinctrl-1 = <&blsp_i2c3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi3: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x500>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 8>, <&blsp_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi3_default>;
pinctrl-1 = <&blsp_spi3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 10>, <&blsp_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c4_default>;
pinctrl-1 = <&blsp_i2c4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi4: spi@78b8000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b8000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 10>, <&blsp_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi4_default>;
pinctrl-1 = <&blsp_spi4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c5: i2c@78b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b9000 0x500>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c5_default>;
pinctrl-1 = <&blsp_i2c5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi5: spi@78b9000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b9000 0x500>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi5_default>;
pinctrl-1 = <&blsp_spi5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078ba000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_i2c6_default>;
pinctrl-1 = <&blsp_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi6: spi@78ba000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078ba000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp_spi6_default>;
pinctrl-1 = <&blsp_spi6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usb: usb@78d9000 {
compatible = "qcom,ci-hdrc";
reg = <0x078d9000 0x200>,
<0x078d9200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <80000000>;
resets = <&gcc GCC_USB_HS_BCR>;
reset-names = "core";
phy_type = "ulpi";
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
ahb-burst-config = <0>;
phy-names = "usb-phy";
phys = <&usb_hs_phy>;
status = "disabled";
#reset-cells = <1>;
ulpi {
usb_hs_phy: phy {
compatible = "qcom,usb-hs-phy-msm8916",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
qcom,init-seq = /bits/ 8 <0x0 0x44>,
<0x1 0x6b>,
<0x2 0x24>,
<0x3 0x13>;
};
};
};
wcnss: remoteproc@a204000 {
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
memory-region = <&wcnss_mem>;
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
power-domains = <&rpmpd MSM8916_VDDCX>,
<&rpmpd MSM8916_VDDMX>;
power-domain-names = "cx", "mx";
qcom,smem-states = <&wcnss_smp2p_out 0>;
qcom,smem-state-names = "stop";
pinctrl-names = "default";
pinctrl-0 = <&wcss_wlan_default>;
status = "disabled";
wcnss_iris: iris {
/* Separate chip, compatible is board-specific */
clocks = <&rpmcc RPM_SMD_RF_CLK2>;
clock-names = "xo";
};
smd-edge {
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 17>;
qcom,smd-edge = <6>;
qcom,remote-pid = <4>;
label = "pronto";
wcnss_ctrl: wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";
qcom,mmio = <&wcnss>;
wcnss_bt: bluetooth {
compatible = "qcom,wcnss-bt";
};
wcnss_wifi: wifi {
compatible = "qcom,wcnss-wlan";
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
qcom,smem-state-names = "tx-enable", "tx-rings-empty";
};
};
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
<0x0b001000 0x1000>, <0x0b004000 0x2000>;
interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
apcs: mailbox@b011000 {
compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
clock-names = "pll", "aux";
#clock-cells = <0>;
};
a53pll: clock@b016000 {
compatible = "qcom,msm8916-a53pll";
reg = <0x0b016000 0x40>;
#clock-cells = <0>;
clocks = <&xo_board>;
clock-names = "xo";
};
timer@b020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x0b020000 0x1000>;
clock-frequency = <19200000>;
frame@b021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b021000 0x1000>,
<0x0b022000 0x1000>;
};
frame@b023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b023000 0x1000>;
status = "disabled";
};
frame@b024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b024000 0x1000>;
status = "disabled";
};
frame@b025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b025000 0x1000>;
status = "disabled";
};
frame@b026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b026000 0x1000>;
status = "disabled";
};
frame@b027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b027000 0x1000>;
status = "disabled";
};
frame@b028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b028000 0x1000>;
status = "disabled";
};
};
cpu0_acc: power-manager@b088000 {
compatible = "qcom,msm8916-acc";
reg = <0x0b088000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu0_saw: power-manager@b089000 {
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
reg = <0x0b089000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu1_acc: power-manager@b098000 {
compatible = "qcom,msm8916-acc";
reg = <0x0b098000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu1_saw: power-manager@b099000 {
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
reg = <0x0b099000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu2_acc: power-manager@b0a8000 {
compatible = "qcom,msm8916-acc";
reg = <0x0b0a8000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu2_saw: power-manager@b0a9000 {
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
reg = <0x0b0a9000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu3_acc: power-manager@b0b8000 {
compatible = "qcom,msm8916-acc";
reg = <0x0b0b8000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
cpu3_saw: power-manager@b0b9000 {
compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
reg = <0x0b0b9000 0x1000>;
status = "reserved"; /* Controlled by PSCI firmware */
};
};
thermal-zones {
cpu0-1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu0_1_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
cpu2_3_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
cooling-maps {
map0 {
trip = <&gpu_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
gpu_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
gpu_crit: gpu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 1>;
trips {
cam_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 0>;
trips {
modem_alert0: trip-point0 {
temperature = <85000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};