drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer
  *
  * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
  */

 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/device.h>
 #include <linux/ethtool.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>

 #include "stmmac_platform.h"

 #define PRG_ETH0			0x0

 #define PRG_ETH0_RGMII_MODE		BIT(0)

 #define PRG_ETH0_EXT_PHY_MODE_MASK	GENMASK(2, 0)
 #define PRG_ETH0_EXT_RGMII_MODE		1
 #define PRG_ETH0_EXT_RMII_MODE		4

 /* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
 #define PRG_ETH0_CLK_M250_SEL_SHIFT	4
 #define PRG_ETH0_CLK_M250_SEL_MASK	GENMASK(4, 4)

 #define PRG_ETH0_TXDLY_SHIFT		5
 #define PRG_ETH0_TXDLY_MASK		GENMASK(6, 5)

 /* divider for the result of m250_sel */
 #define PRG_ETH0_CLK_M250_DIV_SHIFT	7
 #define PRG_ETH0_CLK_M250_DIV_WIDTH	3

 #define PRG_ETH0_RGMII_TX_CLK_EN	10

 #define PRG_ETH0_INVERTED_RMII_CLK	BIT(11)
 #define PRG_ETH0_TX_AND_PHY_REF_CLK	BIT(12)

 #define MUX_CLK_NUM_PARENTS		2

 struct meson8b_dwmac;

 struct meson8b_dwmac_data {
 	int (*set_phy_mode)(struct meson8b_dwmac *dwmac);
 };

 struct meson8b_dwmac {
 	struct device			*dev;
 	void __iomem			*regs;

 	const struct meson8b_dwmac_data	*data;
 	phy_interface_t			phy_mode;
 	struct clk			*rgmii_tx_clk;
 	u32				tx_delay_ns;
 };

 struct meson8b_dwmac_clk_configs {
 	struct clk_mux		m250_mux;
 	struct clk_divider	m250_div;
 	struct clk_fixed_factor	fixed_div2;
 	struct clk_gate		rgmii_tx_en;
 };

 static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
 				    u32 mask, u32 value)
 {
 	u32 data;

 	data = readl(dwmac->regs + reg);
 	data &= ~mask;
 	data |= (value & mask);

 	writel(data, dwmac->regs + reg);
 }

 static struct clk *meson8b_dwmac_register_clk(struct meson8b_dwmac *dwmac,
 					      const char *name_suffix,
 					      const char **parent_names,
 					      int num_parents,
 					      const struct clk_ops *ops,
 					      struct clk_hw *hw)
 {
 	struct clk_init_data init;
 	char clk_name[32];

 	snprintf(clk_name, sizeof(clk_name), "%s#%s", dev_name(dwmac->dev),
 		 name_suffix);

 	init.name = clk_name;
 	init.ops = ops;
 	init.flags = CLK_SET_RATE_PARENT;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;

 	hw->init = &init;

 	return devm_clk_register(dwmac->dev, hw);
 }

 static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
 {
 	int i, ret;
 	struct clk *clk;
 	struct device *dev = dwmac->dev;
 	const char *parent_name, *mux_parent_names[MUX_CLK_NUM_PARENTS];
 	struct meson8b_dwmac_clk_configs *clk_configs;

 	clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
 	if (!clk_configs)
 		return -ENOMEM;

 	/* get the mux parents from DT */
 	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
 		char name[16];

 		snprintf(name, sizeof(name), "clkin%d", i);
 		clk = devm_clk_get(dev, name);
 		if (IS_ERR(clk)) {
 			ret = PTR_ERR(clk);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Missing clock %s\n", name);
 			return ret;
 		}

 		mux_parent_names[i] = __clk_get_name(clk);
 	}

 	clk_configs->m250_mux.reg = dwmac->regs + PRG_ETH0;
 	clk_configs->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
 	clk_configs->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
 	clk = meson8b_dwmac_register_clk(dwmac, "m250_sel", mux_parent_names,
 					 MUX_CLK_NUM_PARENTS, &clk_mux_ops,
 					 &clk_configs->m250_mux.hw);
 	if (WARN_ON(IS_ERR(clk)))
 		return PTR_ERR(clk);

 	parent_name = __clk_get_name(clk);
 	clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0;
 	clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
 	clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
 	clk_configs->m250_div.flags = CLK_DIVIDER_ONE_BASED |
 				CLK_DIVIDER_ALLOW_ZERO |
 				CLK_DIVIDER_ROUND_CLOSEST;
 	clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1,
 					 &clk_divider_ops,
 					 &clk_configs->m250_div.hw);
 	if (WARN_ON(IS_ERR(clk)))
 		return PTR_ERR(clk);

 	parent_name = __clk_get_name(clk);
 	clk_configs->fixed_div2.mult = 1;
 	clk_configs->fixed_div2.div = 2;
 	clk = meson8b_dwmac_register_clk(dwmac, "fixed_div2", &parent_name, 1,
 					 &clk_fixed_factor_ops,
 					 &clk_configs->fixed_div2.hw);
 	if (WARN_ON(IS_ERR(clk)))
 		return PTR_ERR(clk);

 	parent_name = __clk_get_name(clk);
 	clk_configs->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0;
 	clk_configs->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN;
 	clk = meson8b_dwmac_register_clk(dwmac, "rgmii_tx_en", &parent_name, 1,
 					 &clk_gate_ops,
 					 &clk_configs->rgmii_tx_en.hw);
 	if (WARN_ON(IS_ERR(clk)))
 		return PTR_ERR(clk);

 	dwmac->rgmii_tx_clk = clk;

 	return 0;
 }

 static int meson8b_set_phy_mode(struct meson8b_dwmac *dwmac)
 {
 	switch (dwmac->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		/* enable RGMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_RGMII_MODE,
 					PRG_ETH0_RGMII_MODE);
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		/* disable RGMII mode -> enables RMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_RGMII_MODE, 0);
 		break;
 	default:
 		dev_err(dwmac->dev, "fail to set phy-mode %s\n",
 			phy_modes(dwmac->phy_mode));
 		return -EINVAL;
 	}

 	return 0;
 }

 static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
 {
 	switch (dwmac->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		/* enable RGMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_EXT_PHY_MODE_MASK,
 					PRG_ETH0_EXT_RGMII_MODE);
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		/* disable RGMII mode -> enables RMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_EXT_PHY_MODE_MASK,
 					PRG_ETH0_EXT_RMII_MODE);
 		break;
 	default:
 		dev_err(dwmac->dev, "fail to set phy-mode %s\n",
 			phy_modes(dwmac->phy_mode));
 		return -EINVAL;
 	}

 	return 0;
 }

 static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
 {
 	int ret;
 	u8 tx_dly_val = 0;

 	switch (dwmac->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 		/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
 		 * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
 		 * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
 		 */
 		tx_dly_val = dwmac->tx_delay_ns >> 1;
 		/* fall through */

 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		/* only relevant for RMII mode -> disable in RGMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_INVERTED_RMII_CLK, 0);

 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
 					tx_dly_val << PRG_ETH0_TXDLY_SHIFT);

 		/* Configure the 125MHz RGMII TX clock, the IP block changes
 		 * the output automatically (= without us having to configure
 		 * a register) based on the line-speed (125MHz for Gbit speeds,
 		 * 25MHz for 100Mbit/s and 2.5MHz for 10Mbit/s).
 		 */
 		ret = clk_set_rate(dwmac->rgmii_tx_clk, 125 * 1000 * 1000);
 		if (ret) {
 			dev_err(dwmac->dev,
 				"failed to set RGMII TX clock\n");
 			return ret;
 		}

 		ret = clk_prepare_enable(dwmac->rgmii_tx_clk);
 		if (ret) {
 			dev_err(dwmac->dev,
 				"failed to enable the RGMII TX clock\n");
 			return ret;
 		}

 		devm_add_action_or_reset(dwmac->dev,
 					(void(*)(void *))clk_disable_unprepare,
 					dwmac->rgmii_tx_clk);
 		break;

 	case PHY_INTERFACE_MODE_RMII:
 		/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_INVERTED_RMII_CLK,
 					PRG_ETH0_INVERTED_RMII_CLK);

 		/* TX clock delay cannot be configured in RMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
 					0);

 		break;

 	default:
 		dev_err(dwmac->dev, "unsupported phy-mode %s\n",
 			phy_modes(dwmac->phy_mode));
 		return -EINVAL;
 	}

 	/* enable TX_CLK and PHY_REF_CLK generator */
 	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
 				PRG_ETH0_TX_AND_PHY_REF_CLK);

 	return 0;
 }

 static int meson8b_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct resource *res;
 	struct meson8b_dwmac *dwmac;
 	int ret;

 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
 		return ret;

 	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);

 	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
 	if (!dwmac) {
 		ret = -ENOMEM;
 		goto err_remove_config_dt;
 	}

 	dwmac->data = (const struct meson8b_dwmac_data *)
 		of_device_get_match_data(&pdev->dev);
 	if (!dwmac->data) {
 		ret = -EINVAL;
 		goto err_remove_config_dt;
 	}
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(dwmac->regs)) {
 		ret = PTR_ERR(dwmac->regs);
 		goto err_remove_config_dt;
 	}

 	dwmac->dev = &pdev->dev;
 	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
 	if (dwmac->phy_mode < 0) {
 		dev_err(&pdev->dev, "missing phy-mode property\n");
 		ret = -EINVAL;
 		goto err_remove_config_dt;
 	}

 	/* use 2ns as fallback since this value was previously hardcoded */
 	if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
 				 &dwmac->tx_delay_ns))
 		dwmac->tx_delay_ns = 2;

 	ret = meson8b_init_rgmii_tx_clk(dwmac);
 	if (ret)
 		goto err_remove_config_dt;

 	ret = dwmac->data->set_phy_mode(dwmac);
 	if (ret)
 		goto err_remove_config_dt;

 	ret = meson8b_init_prg_eth(dwmac);
 	if (ret)
 		goto err_remove_config_dt;

 	plat_dat->bsp_priv = dwmac;

 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
 		goto err_remove_config_dt;

 	return 0;

 err_remove_config_dt:
 	stmmac_remove_config_dt(pdev, plat_dat);

 	return ret;
 }

 static const struct meson8b_dwmac_data meson8b_dwmac_data = {
 	.set_phy_mode = meson8b_set_phy_mode,
 };

 static const struct meson8b_dwmac_data meson_axg_dwmac_data = {
 	.set_phy_mode = meson_axg_set_phy_mode,
 };

 static const struct of_device_id meson8b_dwmac_match[] = {
 	{
 		.compatible = "amlogic,meson8b-dwmac",
 		.data = &meson8b_dwmac_data,
 	},
 	{
 		.compatible = "amlogic,meson8m2-dwmac",
 		.data = &meson8b_dwmac_data,
 	},
 	{
 		.compatible = "amlogic,meson-gxbb-dwmac",
 		.data = &meson8b_dwmac_data,
 	},
 	{
 		.compatible = "amlogic,meson-axg-dwmac",
 		.data = &meson_axg_dwmac_data,
 	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);

 static struct platform_driver meson8b_dwmac_driver = {
 	.probe  = meson8b_dwmac_probe,
 	.remove = stmmac_pltfr_remove,
 	.driver = {
 		.name           = "meson8b-dwmac",
 		.pm		= &stmmac_pltfr_pm_ops,
 		.of_match_table = meson8b_dwmac_match,
 	},
 };
 module_platform_driver(meson8b_dwmac_driver);

 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
 MODULE_DESCRIPTION("Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer
	*
	* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
	*/

	#include <linux/clk.h>
	#include <linux/clk-provider.h>
	#include <linux/device.h>
	#include <linux/ethtool.h>
	#include <linux/io.h>
	#include <linux/ioport.h>
	#include <linux/module.h>
	#include <linux/of_device.h>
	#include <linux/of_net.h>
	#include <linux/mfd/syscon.h>
	#include <linux/platform_device.h>
	#include <linux/stmmac.h>

	#include "stmmac_platform.h"

	#define PRG_ETH0 0x0

	#define PRG_ETH0_RGMII_MODE BIT(0)

	#define PRG_ETH0_EXT_PHY_MODE_MASK GENMASK(2, 0)
	#define PRG_ETH0_EXT_RGMII_MODE 1
	#define PRG_ETH0_EXT_RMII_MODE 4

	/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
	#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
	#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)

	#define PRG_ETH0_TXDLY_SHIFT 5
	#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)

	/* divider for the result of m250_sel */
	#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
	#define PRG_ETH0_CLK_M250_DIV_WIDTH 3

	#define PRG_ETH0_RGMII_TX_CLK_EN 10

	#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
	#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)

	#define MUX_CLK_NUM_PARENTS 2

	struct meson8b_dwmac;

	struct meson8b_dwmac_data {
	int (set_phy_mode)(struct meson8b_dwmac dwmac);
	};

	struct meson8b_dwmac {
	struct device *dev;
	void __iomem *regs;

	const struct meson8b_dwmac_data *data;
	phy_interface_t phy_mode;
	struct clk *rgmii_tx_clk;
	u32 tx_delay_ns;
	};

	struct meson8b_dwmac_clk_configs {
	struct clk_mux m250_mux;
	struct clk_divider m250_div;
	struct clk_fixed_factor fixed_div2;
	struct clk_gate rgmii_tx_en;
	};

	static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
	u32 mask, u32 value)
	{
	u32 data;

	data = readl(dwmac->regs + reg);
	data &= ~mask;
	data \|= (value & mask);

	writel(data, dwmac->regs + reg);
	}

	static struct clk meson8b_dwmac_register_clk(struct meson8b_dwmac dwmac,
	const char *name_suffix,
	const char **parent_names,
	int num_parents,
	const struct clk_ops *ops,
	struct clk_hw *hw)
	{
	struct clk_init_data init;
	char clk_name[32];

	snprintf(clk_name, sizeof(clk_name), "%s#%s", dev_name(dwmac->dev),
	name_suffix);

	init.name = clk_name;
	init.ops = ops;
	init.flags = CLK_SET_RATE_PARENT;
	init.parent_names = parent_names;
	init.num_parents = num_parents;

	hw->init = &init;

	return devm_clk_register(dwmac->dev, hw);
	}

	static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
	{
	int i, ret;
	struct clk *clk;
	struct device *dev = dwmac->dev;
	const char parent_name, mux_parent_names[MUX_CLK_NUM_PARENTS];
	struct meson8b_dwmac_clk_configs *clk_configs;

	clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
	if (!clk_configs)
	return -ENOMEM;

	/* get the mux parents from DT */
	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
	char name[16];

	snprintf(name, sizeof(name), "clkin%d", i);
	clk = devm_clk_get(dev, name);
	if (IS_ERR(clk)) {
	ret = PTR_ERR(clk);
	if (ret != -EPROBE_DEFER)
	dev_err(dev, "Missing clock %s\n", name);
	return ret;
	}

	mux_parent_names[i] = __clk_get_name(clk);
	}

	clk_configs->m250_mux.reg = dwmac->regs + PRG_ETH0;
	clk_configs->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
	clk_configs->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
	clk = meson8b_dwmac_register_clk(dwmac, "m250_sel", mux_parent_names,
	MUX_CLK_NUM_PARENTS, &clk_mux_ops,
	&clk_configs->m250_mux.hw);
	if (WARN_ON(IS_ERR(clk)))
	return PTR_ERR(clk);

	parent_name = __clk_get_name(clk);
	clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0;
	clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
	clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
	clk_configs->m250_div.flags = CLK_DIVIDER_ONE_BASED \|
	CLK_DIVIDER_ALLOW_ZERO \|
	CLK_DIVIDER_ROUND_CLOSEST;
	clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1,
	&clk_divider_ops,
	&clk_configs->m250_div.hw);
	if (WARN_ON(IS_ERR(clk)))
	return PTR_ERR(clk);

	parent_name = __clk_get_name(clk);
	clk_configs->fixed_div2.mult = 1;
	clk_configs->fixed_div2.div = 2;
	clk = meson8b_dwmac_register_clk(dwmac, "fixed_div2", &parent_name, 1,
	&clk_fixed_factor_ops,
	&clk_configs->fixed_div2.hw);
	if (WARN_ON(IS_ERR(clk)))
	return PTR_ERR(clk);

	parent_name = __clk_get_name(clk);
	clk_configs->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0;
	clk_configs->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN;
	clk = meson8b_dwmac_register_clk(dwmac, "rgmii_tx_en", &parent_name, 1,
	&clk_gate_ops,
	&clk_configs->rgmii_tx_en.hw);
	if (WARN_ON(IS_ERR(clk)))
	return PTR_ERR(clk);

	dwmac->rgmii_tx_clk = clk;

	return 0;
	}

	static int meson8b_set_phy_mode(struct meson8b_dwmac *dwmac)
	{
	switch (dwmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
	case PHY_INTERFACE_MODE_RGMII_RXID:
	case PHY_INTERFACE_MODE_RGMII_ID:
	case PHY_INTERFACE_MODE_RGMII_TXID:
	/* enable RGMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_RGMII_MODE,
	PRG_ETH0_RGMII_MODE);
	break;
	case PHY_INTERFACE_MODE_RMII:
	/* disable RGMII mode -> enables RMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_RGMII_MODE, 0);
	break;
	default:
	dev_err(dwmac->dev, "fail to set phy-mode %s\n",
	phy_modes(dwmac->phy_mode));
	return -EINVAL;
	}

	return 0;
	}

	static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
	{
	switch (dwmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
	case PHY_INTERFACE_MODE_RGMII_RXID:
	case PHY_INTERFACE_MODE_RGMII_ID:
	case PHY_INTERFACE_MODE_RGMII_TXID:
	/* enable RGMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_EXT_PHY_MODE_MASK,
	PRG_ETH0_EXT_RGMII_MODE);
	break;
	case PHY_INTERFACE_MODE_RMII:
	/* disable RGMII mode -> enables RMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_EXT_PHY_MODE_MASK,
	PRG_ETH0_EXT_RMII_MODE);
	break;
	default:
	dev_err(dwmac->dev, "fail to set phy-mode %s\n",
	phy_modes(dwmac->phy_mode));
	return -EINVAL;
	}

	return 0;
	}

	static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
	{
	int ret;
	u8 tx_dly_val = 0;

	switch (dwmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
	case PHY_INTERFACE_MODE_RGMII_RXID:
	/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
	* 8ns are exactly one cycle of the 125MHz RGMII TX clock):
	* 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
	*/
	tx_dly_val = dwmac->tx_delay_ns >> 1;
	/* fall through */

	case PHY_INTERFACE_MODE_RGMII_ID:
	case PHY_INTERFACE_MODE_RGMII_TXID:
	/* only relevant for RMII mode -> disable in RGMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_INVERTED_RMII_CLK, 0);

	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
	tx_dly_val << PRG_ETH0_TXDLY_SHIFT);

	/* Configure the 125MHz RGMII TX clock, the IP block changes
	* the output automatically (= without us having to configure
	* a register) based on the line-speed (125MHz for Gbit speeds,
	* 25MHz for 100Mbit/s and 2.5MHz for 10Mbit/s).
	*/
	ret = clk_set_rate(dwmac->rgmii_tx_clk, 125 * 1000 * 1000);
	if (ret) {
	dev_err(dwmac->dev,
	"failed to set RGMII TX clock\n");
	return ret;
	}

	ret = clk_prepare_enable(dwmac->rgmii_tx_clk);
	if (ret) {
	dev_err(dwmac->dev,
	"failed to enable the RGMII TX clock\n");
	return ret;
	}

	devm_add_action_or_reset(dwmac->dev,
	(void()(void ))clk_disable_unprepare,
	dwmac->rgmii_tx_clk);
	break;

	case PHY_INTERFACE_MODE_RMII:
	/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_INVERTED_RMII_CLK,
	PRG_ETH0_INVERTED_RMII_CLK);

	/* TX clock delay cannot be configured in RMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
	0);

	break;

	default:
	dev_err(dwmac->dev, "unsupported phy-mode %s\n",
	phy_modes(dwmac->phy_mode));
	return -EINVAL;
	}

	/* enable TX_CLK and PHY_REF_CLK generator */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
	PRG_ETH0_TX_AND_PHY_REF_CLK);

	return 0;
	}

	static int meson8b_dwmac_probe(struct platform_device *pdev)
	{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct resource *res;
	struct meson8b_dwmac *dwmac;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
	return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
	return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac) {
	ret = -ENOMEM;
	goto err_remove_config_dt;
	}

	dwmac->data = (const struct meson8b_dwmac_data *)
	of_device_get_match_data(&pdev->dev);
	if (!dwmac->data) {
	ret = -EINVAL;
	goto err_remove_config_dt;
	}
	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(dwmac->regs)) {
	ret = PTR_ERR(dwmac->regs);
	goto err_remove_config_dt;
	}

	dwmac->dev = &pdev->dev;
	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
	if (dwmac->phy_mode < 0) {
	dev_err(&pdev->dev, "missing phy-mode property\n");
	ret = -EINVAL;
	goto err_remove_config_dt;
	}

	/* use 2ns as fallback since this value was previously hardcoded */
	if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
	&dwmac->tx_delay_ns))
	dwmac->tx_delay_ns = 2;

	ret = meson8b_init_rgmii_tx_clk(dwmac);
	if (ret)
	goto err_remove_config_dt;

	ret = dwmac->data->set_phy_mode(dwmac);
	if (ret)
	goto err_remove_config_dt;

	ret = meson8b_init_prg_eth(dwmac);
	if (ret)
	goto err_remove_config_dt;

	plat_dat->bsp_priv = dwmac;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
	goto err_remove_config_dt;

	return 0;

	err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
	}

	static const struct meson8b_dwmac_data meson8b_dwmac_data = {
	.set_phy_mode = meson8b_set_phy_mode,
	};

	static const struct meson8b_dwmac_data meson_axg_dwmac_data = {
	.set_phy_mode = meson_axg_set_phy_mode,
	};

	static const struct of_device_id meson8b_dwmac_match[] = {
	{
	.compatible = "amlogic,meson8b-dwmac",
	.data = &meson8b_dwmac_data,
	},
	{
	.compatible = "amlogic,meson8m2-dwmac",
	.data = &meson8b_dwmac_data,
	},
	{
	.compatible = "amlogic,meson-gxbb-dwmac",
	.data = &meson8b_dwmac_data,
	},
	{
	.compatible = "amlogic,meson-axg-dwmac",
	.data = &meson_axg_dwmac_data,
	},
	{ }
	};
	MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);

	static struct platform_driver meson8b_dwmac_driver = {
	.probe = meson8b_dwmac_probe,
	.remove = stmmac_pltfr_remove,
	.driver = {
	.name = "meson8b-dwmac",
	.pm = &stmmac_pltfr_pm_ops,
	.of_match_table = meson8b_dwmac_match,
	},
	};
	module_platform_driver(meson8b_dwmac_driver);

	MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
	MODULE_DESCRIPTION("Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer");
	MODULE_LICENSE("GPL v2");