| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer |
| * |
| * Copyright (C) 2013 Chen-Yu Tsai |
| * |
| * Chen-Yu Tsai <wens@csie.org> |
| */ |
| |
| #include <linux/stmmac.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_net.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "stmmac_platform.h" |
| |
| struct sunxi_priv_data { |
| int interface; |
| int clk_enabled; |
| struct clk *tx_clk; |
| struct regulator *regulator; |
| }; |
| |
| #define SUN7I_GMAC_GMII_RGMII_RATE 125000000 |
| #define SUN7I_GMAC_MII_RATE 25000000 |
| |
| static int sun7i_gmac_init(struct platform_device *pdev, void *priv) |
| { |
| struct sunxi_priv_data *gmac = priv; |
| int ret; |
| |
| if (gmac->regulator) { |
| ret = regulator_enable(gmac->regulator); |
| if (ret) |
| return ret; |
| } |
| |
| /* Set GMAC interface port mode |
| * |
| * The GMAC TX clock lines are configured by setting the clock |
| * rate, which then uses the auto-reparenting feature of the |
| * clock driver, and enabling/disabling the clock. |
| */ |
| if (gmac->interface == PHY_INTERFACE_MODE_RGMII) { |
| clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); |
| clk_prepare_enable(gmac->tx_clk); |
| gmac->clk_enabled = 1; |
| } else { |
| clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); |
| ret = clk_prepare(gmac->tx_clk); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void sun7i_gmac_exit(struct platform_device *pdev, void *priv) |
| { |
| struct sunxi_priv_data *gmac = priv; |
| |
| if (gmac->clk_enabled) { |
| clk_disable(gmac->tx_clk); |
| gmac->clk_enabled = 0; |
| } |
| clk_unprepare(gmac->tx_clk); |
| |
| if (gmac->regulator) |
| regulator_disable(gmac->regulator); |
| } |
| |
| static void sun7i_fix_speed(void *priv, unsigned int speed) |
| { |
| struct sunxi_priv_data *gmac = priv; |
| |
| /* only GMII mode requires us to reconfigure the clock lines */ |
| if (gmac->interface != PHY_INTERFACE_MODE_GMII) |
| return; |
| |
| if (gmac->clk_enabled) { |
| clk_disable(gmac->tx_clk); |
| gmac->clk_enabled = 0; |
| } |
| clk_unprepare(gmac->tx_clk); |
| |
| if (speed == 1000) { |
| clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); |
| clk_prepare_enable(gmac->tx_clk); |
| gmac->clk_enabled = 1; |
| } else { |
| clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); |
| clk_prepare(gmac->tx_clk); |
| } |
| } |
| |
| static int sun7i_gmac_probe(struct platform_device *pdev) |
| { |
| struct plat_stmmacenet_data *plat_dat; |
| struct stmmac_resources stmmac_res; |
| struct sunxi_priv_data *gmac; |
| struct device *dev = &pdev->dev; |
| int ret; |
| |
| ret = stmmac_get_platform_resources(pdev, &stmmac_res); |
| if (ret) |
| return ret; |
| |
| plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); |
| if (IS_ERR(plat_dat)) |
| return PTR_ERR(plat_dat); |
| |
| gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); |
| if (!gmac) { |
| ret = -ENOMEM; |
| goto err_remove_config_dt; |
| } |
| |
| gmac->interface = of_get_phy_mode(dev->of_node); |
| |
| gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx"); |
| if (IS_ERR(gmac->tx_clk)) { |
| dev_err(dev, "could not get tx clock\n"); |
| ret = PTR_ERR(gmac->tx_clk); |
| goto err_remove_config_dt; |
| } |
| |
| /* Optional regulator for PHY */ |
| gmac->regulator = devm_regulator_get_optional(dev, "phy"); |
| if (IS_ERR(gmac->regulator)) { |
| if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) { |
| ret = -EPROBE_DEFER; |
| goto err_remove_config_dt; |
| } |
| dev_info(dev, "no regulator found\n"); |
| gmac->regulator = NULL; |
| } |
| |
| /* platform data specifying hardware features and callbacks. |
| * hardware features were copied from Allwinner drivers. */ |
| plat_dat->tx_coe = 1; |
| plat_dat->has_gmac = true; |
| plat_dat->bsp_priv = gmac; |
| plat_dat->init = sun7i_gmac_init; |
| plat_dat->exit = sun7i_gmac_exit; |
| plat_dat->fix_mac_speed = sun7i_fix_speed; |
| |
| ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv); |
| if (ret) |
| goto err_remove_config_dt; |
| |
| ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); |
| if (ret) |
| goto err_gmac_exit; |
| |
| return 0; |
| |
| err_gmac_exit: |
| sun7i_gmac_exit(pdev, plat_dat->bsp_priv); |
| err_remove_config_dt: |
| stmmac_remove_config_dt(pdev, plat_dat); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id sun7i_dwmac_match[] = { |
| { .compatible = "allwinner,sun7i-a20-gmac" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sun7i_dwmac_match); |
| |
| static struct platform_driver sun7i_dwmac_driver = { |
| .probe = sun7i_gmac_probe, |
| .remove = stmmac_pltfr_remove, |
| .driver = { |
| .name = "sun7i-dwmac", |
| .pm = &stmmac_pltfr_pm_ops, |
| .of_match_table = sun7i_dwmac_match, |
| }, |
| }; |
| module_platform_driver(sun7i_dwmac_driver); |
| |
| MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); |
| MODULE_DESCRIPTION("Allwinner sunxi DWMAC specific glue layer"); |
| MODULE_LICENSE("GPL"); |