drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*******************************************************************************
   This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
   DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
   developing this code.

   This contains the functions to handle the dma.

   Copyright (C) 2007-2009  STMicroelectronics Ltd


   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/

 #include <asm/io.h>
 #include "dwmac1000.h"
 #include "dwmac_dma.h"

 static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 {
 	u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
 	int i;

 	pr_info("dwmac1000: Master AXI performs %s burst length\n",
 		!(value & DMA_AXI_UNDEF) ? "fixed" : "any");

 	if (axi->axi_lpi_en)
 		value |= DMA_AXI_EN_LPI;
 	if (axi->axi_xit_frm)
 		value |= DMA_AXI_LPI_XIT_FRM;

 	value &= ~DMA_AXI_WR_OSR_LMT;
 	value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
 		 DMA_AXI_WR_OSR_LMT_SHIFT;

 	value &= ~DMA_AXI_RD_OSR_LMT;
 	value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
 		 DMA_AXI_RD_OSR_LMT_SHIFT;

 	/* Depending on the UNDEF bit the Master AXI will perform any burst
 	 * length according to the BLEN programmed (by default all BLEN are
 	 * set).
 	 */
 	for (i = 0; i < AXI_BLEN; i++) {
 		switch (axi->axi_blen[i]) {
 		case 256:
 			value |= DMA_AXI_BLEN256;
 			break;
 		case 128:
 			value |= DMA_AXI_BLEN128;
 			break;
 		case 64:
 			value |= DMA_AXI_BLEN64;
 			break;
 		case 32:
 			value |= DMA_AXI_BLEN32;
 			break;
 		case 16:
 			value |= DMA_AXI_BLEN16;
 			break;
 		case 8:
 			value |= DMA_AXI_BLEN8;
 			break;
 		case 4:
 			value |= DMA_AXI_BLEN4;
 			break;
 		}
 	}

 	writel(value, ioaddr + DMA_AXI_BUS_MODE);
 }

 static void dwmac1000_dma_init(void __iomem *ioaddr,
 			       struct stmmac_dma_cfg *dma_cfg, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
 	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
 	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;

 	/*
 	 * Set the DMA PBL (Programmable Burst Length) mode.
 	 *
 	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
 	 * post 3.5 mode bit acts as 8*PBL.
 	 */
 	if (dma_cfg->pblx8)
 		value |= DMA_BUS_MODE_MAXPBL;
 	value |= DMA_BUS_MODE_USP;
 	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
 	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
 	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);

 	/* Set the Fixed burst mode */
 	if (dma_cfg->fixed_burst)
 		value |= DMA_BUS_MODE_FB;

 	/* Mixed Burst has no effect when fb is set */
 	if (dma_cfg->mixed_burst)
 		value |= DMA_BUS_MODE_MB;

 	if (atds)
 		value |= DMA_BUS_MODE_ATDS;

 	if (dma_cfg->aal)
 		value |= DMA_BUS_MODE_AAL;

 	writel(value, ioaddr + DMA_BUS_MODE);

 	/* Mask interrupts by writing to CSR7 */
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
 }

 static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
 				  dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base address list must be written into DMA CSR3 */
 	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }

 static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
 				  dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base address list must be written into DMA CSR4 */
 	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }

 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
 {
 	csr6 &= ~DMA_CONTROL_RFA_MASK;
 	csr6 &= ~DMA_CONTROL_RFD_MASK;

 	/* Leave flow control disabled if receive fifo size is less than
 	 * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
 	 * and send XON when 2K less than full.
 	 */
 	if (rxfifosz < 4096) {
 		csr6 &= ~DMA_CONTROL_EFC;
 		pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
 			 rxfifosz);
 	} else {
 		csr6 |= DMA_CONTROL_EFC;
 		csr6 |= RFA_FULL_MINUS_1K;
 		csr6 |= RFD_FULL_MINUS_2K;
 	}
 	return csr6;
 }

 static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
 					    u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);

 	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable RX store and forward mode\n");
 		csr6 |= DMA_CONTROL_RSF;
 	} else {
 		pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
 		csr6 &= ~DMA_CONTROL_RSF;
 		csr6 &= DMA_CONTROL_TC_RX_MASK;
 		if (mode <= 32)
 			csr6 |= DMA_CONTROL_RTC_32;
 		else if (mode <= 64)
 			csr6 |= DMA_CONTROL_RTC_64;
 		else if (mode <= 96)
 			csr6 |= DMA_CONTROL_RTC_96;
 		else
 			csr6 |= DMA_CONTROL_RTC_128;
 	}

 	/* Configure flow control based on rx fifo size */
 	csr6 = dwmac1000_configure_fc(csr6, fifosz);

 	writel(csr6, ioaddr + DMA_CONTROL);
 }

 static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
 					    u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);

 	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable TX store and forward mode\n");
 		/* Transmit COE type 2 cannot be done in cut-through mode. */
 		csr6 |= DMA_CONTROL_TSF;
 		/* Operating on second frame increase the performance
 		 * especially when transmit store-and-forward is used.
 		 */
 		csr6 |= DMA_CONTROL_OSF;
 	} else {
 		pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
 		csr6 &= ~DMA_CONTROL_TSF;
 		csr6 &= DMA_CONTROL_TC_TX_MASK;
 		/* Set the transmit threshold */
 		if (mode <= 32)
 			csr6 |= DMA_CONTROL_TTC_32;
 		else if (mode <= 64)
 			csr6 |= DMA_CONTROL_TTC_64;
 		else if (mode <= 128)
 			csr6 |= DMA_CONTROL_TTC_128;
 		else if (mode <= 192)
 			csr6 |= DMA_CONTROL_TTC_192;
 		else
 			csr6 |= DMA_CONTROL_TTC_256;
 	}

 	writel(csr6, ioaddr + DMA_CONTROL);
 }

 static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
 {
 	int i;

 	for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
 		if ((i < 12) || (i > 17))
 			reg_space[DMA_BUS_MODE / 4 + i] =
 				readl(ioaddr + DMA_BUS_MODE + i * 4);
 }

 static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
 				     struct dma_features *dma_cap)
 {
 	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);

 	dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
 	dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
 	dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
 	dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
 	dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
 	dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
 	dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
 	dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
 	dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
 	/* MMC */
 	dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
 	/* IEEE 1588-2002 */
 	dma_cap->time_stamp =
 	    (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
 	/* IEEE 1588-2008 */
 	dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
 	/* 802.3az - Energy-Efficient Ethernet (EEE) */
 	dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
 	dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
 	/* TX and RX csum */
 	dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
 	dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
 	dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
 	dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
 	/* TX and RX number of channels */
 	dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
 	dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
 	/* Alternate (enhanced) DESC mode */
 	dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
 }

 static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
 				  u32 number_chan)
 {
 	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
 }

 const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.reset = dwmac_dma_reset,
 	.init = dwmac1000_dma_init,
 	.init_rx_chan = dwmac1000_dma_init_rx,
 	.init_tx_chan = dwmac1000_dma_init_tx,
 	.axi = dwmac1000_dma_axi,
 	.dump_regs = dwmac1000_dump_dma_regs,
 	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
 	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
 	.enable_dma_transmission = dwmac_enable_dma_transmission,
 	.enable_dma_irq = dwmac_enable_dma_irq,
 	.disable_dma_irq = dwmac_disable_dma_irq,
 	.start_tx = dwmac_dma_start_tx,
 	.stop_tx = dwmac_dma_stop_tx,
 	.start_rx = dwmac_dma_start_rx,
 	.stop_rx = dwmac_dma_stop_rx,
 	.dma_interrupt = dwmac_dma_interrupt,
 	.get_hw_feature = dwmac1000_get_hw_feature,
 	.rx_watchdog = dwmac1000_rx_watchdog,
 };
	// SPDX-License-Identifier: GPL-2.0-only
	/*******************************************************************************
	This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
	DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
	developing this code.

	This contains the functions to handle the dma.

	Copyright (C) 2007-2009 STMicroelectronics Ltd


	Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
	*******************************************************************************/

	#include <asm/io.h>
	#include "dwmac1000.h"
	#include "dwmac_dma.h"

	static void dwmac1000_dma_axi(void __iomem ioaddr, struct stmmac_axi axi)
	{
	u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
	int i;

	pr_info("dwmac1000: Master AXI performs %s burst length\n",
	!(value & DMA_AXI_UNDEF) ? "fixed" : "any");

	if (axi->axi_lpi_en)
	value \|= DMA_AXI_EN_LPI;
	if (axi->axi_xit_frm)
	value \|= DMA_AXI_LPI_XIT_FRM;

	value &= ~DMA_AXI_WR_OSR_LMT;
	value \|= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
	DMA_AXI_WR_OSR_LMT_SHIFT;

	value &= ~DMA_AXI_RD_OSR_LMT;
	value \|= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
	DMA_AXI_RD_OSR_LMT_SHIFT;

	/* Depending on the UNDEF bit the Master AXI will perform any burst
	* length according to the BLEN programmed (by default all BLEN are
	* set).
	*/
	for (i = 0; i < AXI_BLEN; i++) {
	switch (axi->axi_blen[i]) {
	case 256:
	value \|= DMA_AXI_BLEN256;
	break;
	case 128:
	value \|= DMA_AXI_BLEN128;
	break;
	case 64:
	value \|= DMA_AXI_BLEN64;
	break;
	case 32:
	value \|= DMA_AXI_BLEN32;
	break;
	case 16:
	value \|= DMA_AXI_BLEN16;
	break;
	case 8:
	value \|= DMA_AXI_BLEN8;
	break;
	case 4:
	value \|= DMA_AXI_BLEN4;
	break;
	}
	}

	writel(value, ioaddr + DMA_AXI_BUS_MODE);
	}

	static void dwmac1000_dma_init(void __iomem *ioaddr,
	struct stmmac_dma_cfg *dma_cfg, int atds)
	{
	u32 value = readl(ioaddr + DMA_BUS_MODE);
	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;

	/*
	* Set the DMA PBL (Programmable Burst Length) mode.
	*
	* Note: before stmmac core 3.50 this mode bit was 4xPBL, and
	* post 3.5 mode bit acts as 8*PBL.
	*/
	if (dma_cfg->pblx8)
	value \|= DMA_BUS_MODE_MAXPBL;
	value \|= DMA_BUS_MODE_USP;
	value &= ~(DMA_BUS_MODE_PBL_MASK \| DMA_BUS_MODE_RPBL_MASK);
	value \|= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
	value \|= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);

	/* Set the Fixed burst mode */
	if (dma_cfg->fixed_burst)
	value \|= DMA_BUS_MODE_FB;

	/* Mixed Burst has no effect when fb is set */
	if (dma_cfg->mixed_burst)
	value \|= DMA_BUS_MODE_MB;

	if (atds)
	value \|= DMA_BUS_MODE_ATDS;

	if (dma_cfg->aal)
	value \|= DMA_BUS_MODE_AAL;

	writel(value, ioaddr + DMA_BUS_MODE);

	/* Mask interrupts by writing to CSR7 */
	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
	}

	static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
	struct stmmac_dma_cfg *dma_cfg,
	dma_addr_t dma_rx_phy, u32 chan)
	{
	/* RX descriptor base address list must be written into DMA CSR3 */
	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
	}

	static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
	struct stmmac_dma_cfg *dma_cfg,
	dma_addr_t dma_tx_phy, u32 chan)
	{
	/* TX descriptor base address list must be written into DMA CSR4 */
	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
	}

	static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
	{
	csr6 &= ~DMA_CONTROL_RFA_MASK;
	csr6 &= ~DMA_CONTROL_RFD_MASK;

	/* Leave flow control disabled if receive fifo size is less than
	* 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
	* and send XON when 2K less than full.
	*/
	if (rxfifosz < 4096) {
	csr6 &= ~DMA_CONTROL_EFC;
	pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
	rxfifosz);
	} else {
	csr6 \|= DMA_CONTROL_EFC;
	csr6 \|= RFA_FULL_MINUS_1K;
	csr6 \|= RFD_FULL_MINUS_2K;
	}
	return csr6;
	}

	static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
	u32 channel, int fifosz, u8 qmode)
	{
	u32 csr6 = readl(ioaddr + DMA_CONTROL);

	if (mode == SF_DMA_MODE) {
	pr_debug("GMAC: enable RX store and forward mode\n");
	csr6 \|= DMA_CONTROL_RSF;
	} else {
	pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
	csr6 &= ~DMA_CONTROL_RSF;
	csr6 &= DMA_CONTROL_TC_RX_MASK;
	if (mode <= 32)
	csr6 \|= DMA_CONTROL_RTC_32;
	else if (mode <= 64)
	csr6 \|= DMA_CONTROL_RTC_64;
	else if (mode <= 96)
	csr6 \|= DMA_CONTROL_RTC_96;
	else
	csr6 \|= DMA_CONTROL_RTC_128;
	}

	/* Configure flow control based on rx fifo size */
	csr6 = dwmac1000_configure_fc(csr6, fifosz);

	writel(csr6, ioaddr + DMA_CONTROL);
	}

	static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
	u32 channel, int fifosz, u8 qmode)
	{
	u32 csr6 = readl(ioaddr + DMA_CONTROL);

	if (mode == SF_DMA_MODE) {
	pr_debug("GMAC: enable TX store and forward mode\n");
	/* Transmit COE type 2 cannot be done in cut-through mode. */
	csr6 \|= DMA_CONTROL_TSF;
	/* Operating on second frame increase the performance
	* especially when transmit store-and-forward is used.
	*/
	csr6 \|= DMA_CONTROL_OSF;
	} else {
	pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
	csr6 &= ~DMA_CONTROL_TSF;
	csr6 &= DMA_CONTROL_TC_TX_MASK;
	/* Set the transmit threshold */
	if (mode <= 32)
	csr6 \|= DMA_CONTROL_TTC_32;
	else if (mode <= 64)
	csr6 \|= DMA_CONTROL_TTC_64;
	else if (mode <= 128)
	csr6 \|= DMA_CONTROL_TTC_128;
	else if (mode <= 192)
	csr6 \|= DMA_CONTROL_TTC_192;
	else
	csr6 \|= DMA_CONTROL_TTC_256;
	}

	writel(csr6, ioaddr + DMA_CONTROL);
	}

	static void dwmac1000_dump_dma_regs(void __iomem ioaddr, u32 reg_space)
	{
	int i;

	for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
	if ((i < 12) \|\| (i > 17))
	reg_space[DMA_BUS_MODE / 4 + i] =
	readl(ioaddr + DMA_BUS_MODE + i * 4);
	}

	static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
	struct dma_features *dma_cap)
	{
	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);

	dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
	dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
	dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
	dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
	dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
	dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
	dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
	dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
	dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
	/* MMC */
	dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
	/* IEEE 1588-2002 */
	dma_cap->time_stamp =
	(hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
	/* IEEE 1588-2008 */
	dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
	/* 802.3az - Energy-Efficient Ethernet (EEE) */
	dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
	dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
	/* TX and RX csum */
	dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
	dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
	dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
	dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
	/* TX and RX number of channels */
	dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
	dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
	/* Alternate (enhanced) DESC mode */
	dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
	}

	static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
	u32 number_chan)
	{
	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
	}

	const struct stmmac_dma_ops dwmac1000_dma_ops = {
	.reset = dwmac_dma_reset,
	.init = dwmac1000_dma_init,
	.init_rx_chan = dwmac1000_dma_init_rx,
	.init_tx_chan = dwmac1000_dma_init_tx,
	.axi = dwmac1000_dma_axi,
	.dump_regs = dwmac1000_dump_dma_regs,
	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
	.enable_dma_transmission = dwmac_enable_dma_transmission,
	.enable_dma_irq = dwmac_enable_dma_irq,
	.disable_dma_irq = dwmac_disable_dma_irq,
	.start_tx = dwmac_dma_start_tx,
	.stop_tx = dwmac_dma_stop_tx,
	.start_rx = dwmac_dma_start_rx,
	.stop_rx = dwmac_dma_stop_rx,
	.dma_interrupt = dwmac_dma_interrupt,
	.get_hw_feature = dwmac1000_get_hw_feature,
	.rx_watchdog = dwmac1000_rx_watchdog,
	};