| .. SPDX-License-Identifier: GPL-2.0 |
| |
| Introduction |
| ------------ |
| |
| The V4L2 drivers tend to be very complex due to the complexity of the |
| hardware: most devices have multiple ICs, export multiple device nodes in |
| /dev, and create also non-V4L2 devices such as DVB, ALSA, FB, I2C and input |
| (IR) devices. |
| |
| Especially the fact that V4L2 drivers have to setup supporting ICs to |
| do audio/video muxing/encoding/decoding makes it more complex than most. |
| Usually these ICs are connected to the main bridge driver through one or |
| more I2C busses, but other busses can also be used. Such devices are |
| called 'sub-devices'. |
| |
| For a long time the framework was limited to the video_device struct for |
| creating V4L device nodes and video_buf for handling the video buffers |
| (note that this document does not discuss the video_buf framework). |
| |
| This meant that all drivers had to do the setup of device instances and |
| connecting to sub-devices themselves. Some of this is quite complicated |
| to do right and many drivers never did do it correctly. |
| |
| There is also a lot of common code that could never be refactored due to |
| the lack of a framework. |
| |
| So this framework sets up the basic building blocks that all drivers |
| need and this same framework should make it much easier to refactor |
| common code into utility functions shared by all drivers. |
| |
| A good example to look at as a reference is the v4l2-pci-skeleton.c |
| source that is available in samples/v4l/. It is a skeleton driver for |
| a PCI capture card, and demonstrates how to use the V4L2 driver |
| framework. It can be used as a template for real PCI video capture driver. |
| |
| Structure of a V4L driver |
| ------------------------- |
| |
| All drivers have the following structure: |
| |
| 1) A struct for each device instance containing the device state. |
| |
| 2) A way of initializing and commanding sub-devices (if any). |
| |
| 3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX) |
| and keeping track of device-node specific data. |
| |
| 4) Filehandle-specific structs containing per-filehandle data; |
| |
| 5) video buffer handling. |
| |
| This is a rough schematic of how it all relates: |
| |
| .. code-block:: none |
| |
| device instances |
| | |
| +-sub-device instances |
| | |
| \-V4L2 device nodes |
| | |
| \-filehandle instances |
| |
| |
| Structure of the V4L2 framework |
| ------------------------------- |
| |
| The framework closely resembles the driver structure: it has a v4l2_device |
| struct for the device instance data, a v4l2_subdev struct to refer to |
| sub-device instances, the video_device struct stores V4L2 device node data |
| and the v4l2_fh struct keeps track of filehandle instances. |
| |
| The V4L2 framework also optionally integrates with the media framework. If a |
| driver sets the struct v4l2_device mdev field, sub-devices and video nodes |
| will automatically appear in the media framework as entities. |