| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Memory subsystem support |
| * |
| * Written by Matt Tolentino <matthew.e.tolentino@intel.com> |
| * Dave Hansen <haveblue@us.ibm.com> |
| * |
| * This file provides the necessary infrastructure to represent |
| * a SPARSEMEM-memory-model system's physical memory in /sysfs. |
| * All arch-independent code that assumes MEMORY_HOTPLUG requires |
| * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/topology.h> |
| #include <linux/capability.h> |
| #include <linux/device.h> |
| #include <linux/memory.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/mm.h> |
| #include <linux/stat.h> |
| #include <linux/slab.h> |
| #include <linux/xarray.h> |
| |
| #include <linux/atomic.h> |
| #include <linux/uaccess.h> |
| |
| #define MEMORY_CLASS_NAME "memory" |
| |
| static const char *const online_type_to_str[] = { |
| [MMOP_OFFLINE] = "offline", |
| [MMOP_ONLINE] = "online", |
| [MMOP_ONLINE_KERNEL] = "online_kernel", |
| [MMOP_ONLINE_MOVABLE] = "online_movable", |
| }; |
| |
| int mhp_online_type_from_str(const char *str) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(online_type_to_str); i++) { |
| if (sysfs_streq(str, online_type_to_str[i])) |
| return i; |
| } |
| return -EINVAL; |
| } |
| |
| #define to_memory_block(dev) container_of(dev, struct memory_block, dev) |
| |
| static int sections_per_block; |
| |
| static inline unsigned long memory_block_id(unsigned long section_nr) |
| { |
| return section_nr / sections_per_block; |
| } |
| |
| static inline unsigned long pfn_to_block_id(unsigned long pfn) |
| { |
| return memory_block_id(pfn_to_section_nr(pfn)); |
| } |
| |
| static inline unsigned long phys_to_block_id(unsigned long phys) |
| { |
| return pfn_to_block_id(PFN_DOWN(phys)); |
| } |
| |
| static int memory_subsys_online(struct device *dev); |
| static int memory_subsys_offline(struct device *dev); |
| |
| static struct bus_type memory_subsys = { |
| .name = MEMORY_CLASS_NAME, |
| .dev_name = MEMORY_CLASS_NAME, |
| .online = memory_subsys_online, |
| .offline = memory_subsys_offline, |
| }; |
| |
| /* |
| * Memory blocks are cached in a local radix tree to avoid |
| * a costly linear search for the corresponding device on |
| * the subsystem bus. |
| */ |
| static DEFINE_XARRAY(memory_blocks); |
| |
| /* |
| * Memory groups, indexed by memory group id (mgid). |
| */ |
| static DEFINE_XARRAY_FLAGS(memory_groups, XA_FLAGS_ALLOC); |
| #define MEMORY_GROUP_MARK_DYNAMIC XA_MARK_1 |
| |
| static BLOCKING_NOTIFIER_HEAD(memory_chain); |
| |
| int register_memory_notifier(struct notifier_block *nb) |
| { |
| return blocking_notifier_chain_register(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_notifier); |
| |
| void unregister_memory_notifier(struct notifier_block *nb) |
| { |
| blocking_notifier_chain_unregister(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_notifier); |
| |
| static void memory_block_release(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| kfree(mem); |
| } |
| |
| unsigned long __weak memory_block_size_bytes(void) |
| { |
| return MIN_MEMORY_BLOCK_SIZE; |
| } |
| EXPORT_SYMBOL_GPL(memory_block_size_bytes); |
| |
| /* |
| * Show the first physical section index (number) of this memory block. |
| */ |
| static ssize_t phys_index_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long phys_index; |
| |
| phys_index = mem->start_section_nr / sections_per_block; |
| |
| return sysfs_emit(buf, "%08lx\n", phys_index); |
| } |
| |
| /* |
| * Legacy interface that we cannot remove. Always indicate "removable" |
| * with CONFIG_MEMORY_HOTREMOVE - bad heuristic. |
| */ |
| static ssize_t removable_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sysfs_emit(buf, "%d\n", (int)IS_ENABLED(CONFIG_MEMORY_HOTREMOVE)); |
| } |
| |
| /* |
| * online, offline, going offline, etc. |
| */ |
| static ssize_t state_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| const char *output; |
| |
| /* |
| * We can probably put these states in a nice little array |
| * so that they're not open-coded |
| */ |
| switch (mem->state) { |
| case MEM_ONLINE: |
| output = "online"; |
| break; |
| case MEM_OFFLINE: |
| output = "offline"; |
| break; |
| case MEM_GOING_OFFLINE: |
| output = "going-offline"; |
| break; |
| default: |
| WARN_ON(1); |
| return sysfs_emit(buf, "ERROR-UNKNOWN-%ld\n", mem->state); |
| } |
| |
| return sysfs_emit(buf, "%s\n", output); |
| } |
| |
| int memory_notify(unsigned long val, void *v) |
| { |
| return blocking_notifier_call_chain(&memory_chain, val, v); |
| } |
| |
| static int memory_block_online(struct memory_block *mem) |
| { |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| unsigned long nr_vmemmap_pages = mem->nr_vmemmap_pages; |
| struct zone *zone; |
| int ret; |
| |
| zone = zone_for_pfn_range(mem->online_type, mem->nid, mem->group, |
| start_pfn, nr_pages); |
| |
| /* |
| * Although vmemmap pages have a different lifecycle than the pages |
| * they describe (they remain until the memory is unplugged), doing |
| * their initialization and accounting at memory onlining/offlining |
| * stage helps to keep accounting easier to follow - e.g vmemmaps |
| * belong to the same zone as the memory they backed. |
| */ |
| if (nr_vmemmap_pages) { |
| ret = mhp_init_memmap_on_memory(start_pfn, nr_vmemmap_pages, zone); |
| if (ret) |
| return ret; |
| } |
| |
| ret = online_pages(start_pfn + nr_vmemmap_pages, |
| nr_pages - nr_vmemmap_pages, zone, mem->group); |
| if (ret) { |
| if (nr_vmemmap_pages) |
| mhp_deinit_memmap_on_memory(start_pfn, nr_vmemmap_pages); |
| return ret; |
| } |
| |
| /* |
| * Account once onlining succeeded. If the zone was unpopulated, it is |
| * now already properly populated. |
| */ |
| if (nr_vmemmap_pages) |
| adjust_present_page_count(pfn_to_page(start_pfn), mem->group, |
| nr_vmemmap_pages); |
| |
| mem->zone = zone; |
| return ret; |
| } |
| |
| static int memory_block_offline(struct memory_block *mem) |
| { |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| unsigned long nr_vmemmap_pages = mem->nr_vmemmap_pages; |
| int ret; |
| |
| if (!mem->zone) |
| return -EINVAL; |
| |
| /* |
| * Unaccount before offlining, such that unpopulated zone and kthreads |
| * can properly be torn down in offline_pages(). |
| */ |
| if (nr_vmemmap_pages) |
| adjust_present_page_count(pfn_to_page(start_pfn), mem->group, |
| -nr_vmemmap_pages); |
| |
| ret = offline_pages(start_pfn + nr_vmemmap_pages, |
| nr_pages - nr_vmemmap_pages, mem->zone, mem->group); |
| if (ret) { |
| /* offline_pages() failed. Account back. */ |
| if (nr_vmemmap_pages) |
| adjust_present_page_count(pfn_to_page(start_pfn), |
| mem->group, nr_vmemmap_pages); |
| return ret; |
| } |
| |
| if (nr_vmemmap_pages) |
| mhp_deinit_memmap_on_memory(start_pfn, nr_vmemmap_pages); |
| |
| mem->zone = NULL; |
| return ret; |
| } |
| |
| /* |
| * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is |
| * OK to have direct references to sparsemem variables in here. |
| */ |
| static int |
| memory_block_action(struct memory_block *mem, unsigned long action) |
| { |
| int ret; |
| |
| switch (action) { |
| case MEM_ONLINE: |
| ret = memory_block_online(mem); |
| break; |
| case MEM_OFFLINE: |
| ret = memory_block_offline(mem); |
| break; |
| default: |
| WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: " |
| "%ld\n", __func__, mem->start_section_nr, action, action); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int memory_block_change_state(struct memory_block *mem, |
| unsigned long to_state, unsigned long from_state_req) |
| { |
| int ret = 0; |
| |
| if (mem->state != from_state_req) |
| return -EINVAL; |
| |
| if (to_state == MEM_OFFLINE) |
| mem->state = MEM_GOING_OFFLINE; |
| |
| ret = memory_block_action(mem, to_state); |
| mem->state = ret ? from_state_req : to_state; |
| |
| return ret; |
| } |
| |
| /* The device lock serializes operations on memory_subsys_[online|offline] */ |
| static int memory_subsys_online(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| int ret; |
| |
| if (mem->state == MEM_ONLINE) |
| return 0; |
| |
| /* |
| * When called via device_online() without configuring the online_type, |
| * we want to default to MMOP_ONLINE. |
| */ |
| if (mem->online_type == MMOP_OFFLINE) |
| mem->online_type = MMOP_ONLINE; |
| |
| ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); |
| mem->online_type = MMOP_OFFLINE; |
| |
| return ret; |
| } |
| |
| static int memory_subsys_offline(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| if (mem->state == MEM_OFFLINE) |
| return 0; |
| |
| return memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); |
| } |
| |
| static ssize_t state_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| const int online_type = mhp_online_type_from_str(buf); |
| struct memory_block *mem = to_memory_block(dev); |
| int ret; |
| |
| if (online_type < 0) |
| return -EINVAL; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| switch (online_type) { |
| case MMOP_ONLINE_KERNEL: |
| case MMOP_ONLINE_MOVABLE: |
| case MMOP_ONLINE: |
| /* mem->online_type is protected by device_hotplug_lock */ |
| mem->online_type = online_type; |
| ret = device_online(&mem->dev); |
| break; |
| case MMOP_OFFLINE: |
| ret = device_offline(&mem->dev); |
| break; |
| default: |
| ret = -EINVAL; /* should never happen */ |
| } |
| |
| unlock_device_hotplug(); |
| |
| if (ret < 0) |
| return ret; |
| if (ret) |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| /* |
| * Legacy interface that we cannot remove: s390x exposes the storage increment |
| * covered by a memory block, allowing for identifying which memory blocks |
| * comprise a storage increment. Since a memory block spans complete |
| * storage increments nowadays, this interface is basically unused. Other |
| * archs never exposed != 0. |
| */ |
| static ssize_t phys_device_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| |
| return sysfs_emit(buf, "%d\n", |
| arch_get_memory_phys_device(start_pfn)); |
| } |
| |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| static int print_allowed_zone(char *buf, int len, int nid, |
| struct memory_group *group, |
| unsigned long start_pfn, unsigned long nr_pages, |
| int online_type, struct zone *default_zone) |
| { |
| struct zone *zone; |
| |
| zone = zone_for_pfn_range(online_type, nid, group, start_pfn, nr_pages); |
| if (zone == default_zone) |
| return 0; |
| |
| return sysfs_emit_at(buf, len, " %s", zone->name); |
| } |
| |
| static ssize_t valid_zones_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| struct memory_group *group = mem->group; |
| struct zone *default_zone; |
| int nid = mem->nid; |
| int len = 0; |
| |
| /* |
| * Check the existing zone. Make sure that we do that only on the |
| * online nodes otherwise the page_zone is not reliable |
| */ |
| if (mem->state == MEM_ONLINE) { |
| /* |
| * If !mem->zone, the memory block spans multiple zones and |
| * cannot get offlined. |
| */ |
| default_zone = mem->zone; |
| if (!default_zone) |
| return sysfs_emit(buf, "%s\n", "none"); |
| len += sysfs_emit_at(buf, len, "%s", default_zone->name); |
| goto out; |
| } |
| |
| default_zone = zone_for_pfn_range(MMOP_ONLINE, nid, group, |
| start_pfn, nr_pages); |
| |
| len += sysfs_emit_at(buf, len, "%s", default_zone->name); |
| len += print_allowed_zone(buf, len, nid, group, start_pfn, nr_pages, |
| MMOP_ONLINE_KERNEL, default_zone); |
| len += print_allowed_zone(buf, len, nid, group, start_pfn, nr_pages, |
| MMOP_ONLINE_MOVABLE, default_zone); |
| out: |
| len += sysfs_emit_at(buf, len, "\n"); |
| return len; |
| } |
| static DEVICE_ATTR_RO(valid_zones); |
| #endif |
| |
| static DEVICE_ATTR_RO(phys_index); |
| static DEVICE_ATTR_RW(state); |
| static DEVICE_ATTR_RO(phys_device); |
| static DEVICE_ATTR_RO(removable); |
| |
| /* |
| * Show the memory block size (shared by all memory blocks). |
| */ |
| static ssize_t block_size_bytes_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sysfs_emit(buf, "%lx\n", memory_block_size_bytes()); |
| } |
| |
| static DEVICE_ATTR_RO(block_size_bytes); |
| |
| /* |
| * Memory auto online policy. |
| */ |
| |
| static ssize_t auto_online_blocks_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sysfs_emit(buf, "%s\n", |
| online_type_to_str[mhp_default_online_type]); |
| } |
| |
| static ssize_t auto_online_blocks_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| const int online_type = mhp_online_type_from_str(buf); |
| |
| if (online_type < 0) |
| return -EINVAL; |
| |
| mhp_default_online_type = online_type; |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(auto_online_blocks); |
| |
| /* |
| * Some architectures will have custom drivers to do this, and |
| * will not need to do it from userspace. The fake hot-add code |
| * as well as ppc64 will do all of their discovery in userspace |
| * and will require this interface. |
| */ |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| static ssize_t probe_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| u64 phys_addr; |
| int nid, ret; |
| unsigned long pages_per_block = PAGES_PER_SECTION * sections_per_block; |
| |
| ret = kstrtoull(buf, 0, &phys_addr); |
| if (ret) |
| return ret; |
| |
| if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1)) |
| return -EINVAL; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| nid = memory_add_physaddr_to_nid(phys_addr); |
| ret = __add_memory(nid, phys_addr, |
| MIN_MEMORY_BLOCK_SIZE * sections_per_block, |
| MHP_NONE); |
| |
| if (ret) |
| goto out; |
| |
| ret = count; |
| out: |
| unlock_device_hotplug(); |
| return ret; |
| } |
| |
| static DEVICE_ATTR_WO(probe); |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| /* |
| * Support for offlining pages of memory |
| */ |
| |
| /* Soft offline a page */ |
| static ssize_t soft_offline_page_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = soft_offline_page(pfn, 0); |
| return ret == 0 ? count : ret; |
| } |
| |
| /* Forcibly offline a page, including killing processes. */ |
| static ssize_t hard_offline_page_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = memory_failure(pfn, MF_SW_SIMULATED); |
| if (ret == -EOPNOTSUPP) |
| ret = 0; |
| return ret ? ret : count; |
| } |
| |
| static DEVICE_ATTR_WO(soft_offline_page); |
| static DEVICE_ATTR_WO(hard_offline_page); |
| #endif |
| |
| /* See phys_device_show(). */ |
| int __weak arch_get_memory_phys_device(unsigned long start_pfn) |
| { |
| return 0; |
| } |
| |
| /* |
| * A reference for the returned memory block device is acquired. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| static struct memory_block *find_memory_block_by_id(unsigned long block_id) |
| { |
| struct memory_block *mem; |
| |
| mem = xa_load(&memory_blocks, block_id); |
| if (mem) |
| get_device(&mem->dev); |
| return mem; |
| } |
| |
| /* |
| * Called under device_hotplug_lock. |
| */ |
| struct memory_block *find_memory_block(unsigned long section_nr) |
| { |
| unsigned long block_id = memory_block_id(section_nr); |
| |
| return find_memory_block_by_id(block_id); |
| } |
| |
| static struct attribute *memory_memblk_attrs[] = { |
| &dev_attr_phys_index.attr, |
| &dev_attr_state.attr, |
| &dev_attr_phys_device.attr, |
| &dev_attr_removable.attr, |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| &dev_attr_valid_zones.attr, |
| #endif |
| NULL |
| }; |
| |
| static const struct attribute_group memory_memblk_attr_group = { |
| .attrs = memory_memblk_attrs, |
| }; |
| |
| static const struct attribute_group *memory_memblk_attr_groups[] = { |
| &memory_memblk_attr_group, |
| NULL, |
| }; |
| |
| static int __add_memory_block(struct memory_block *memory) |
| { |
| int ret; |
| |
| memory->dev.bus = &memory_subsys; |
| memory->dev.id = memory->start_section_nr / sections_per_block; |
| memory->dev.release = memory_block_release; |
| memory->dev.groups = memory_memblk_attr_groups; |
| memory->dev.offline = memory->state == MEM_OFFLINE; |
| |
| ret = device_register(&memory->dev); |
| if (ret) { |
| put_device(&memory->dev); |
| return ret; |
| } |
| ret = xa_err(xa_store(&memory_blocks, memory->dev.id, memory, |
| GFP_KERNEL)); |
| if (ret) |
| device_unregister(&memory->dev); |
| |
| return ret; |
| } |
| |
| static struct zone *early_node_zone_for_memory_block(struct memory_block *mem, |
| int nid) |
| { |
| const unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| const unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| struct zone *zone, *matching_zone = NULL; |
| pg_data_t *pgdat = NODE_DATA(nid); |
| int i; |
| |
| /* |
| * This logic only works for early memory, when the applicable zones |
| * already span the memory block. We don't expect overlapping zones on |
| * a single node for early memory. So if we're told that some PFNs |
| * of a node fall into this memory block, we can assume that all node |
| * zones that intersect with the memory block are actually applicable. |
| * No need to look at the memmap. |
| */ |
| for (i = 0; i < MAX_NR_ZONES; i++) { |
| zone = pgdat->node_zones + i; |
| if (!populated_zone(zone)) |
| continue; |
| if (!zone_intersects(zone, start_pfn, nr_pages)) |
| continue; |
| if (!matching_zone) { |
| matching_zone = zone; |
| continue; |
| } |
| /* Spans multiple zones ... */ |
| matching_zone = NULL; |
| break; |
| } |
| return matching_zone; |
| } |
| |
| #ifdef CONFIG_NUMA |
| /** |
| * memory_block_add_nid() - Indicate that system RAM falling into this memory |
| * block device (partially) belongs to the given node. |
| * @mem: The memory block device. |
| * @nid: The node id. |
| * @context: The memory initialization context. |
| * |
| * Indicate that system RAM falling into this memory block (partially) belongs |
| * to the given node. If the context indicates ("early") that we are adding the |
| * node during node device subsystem initialization, this will also properly |
| * set/adjust mem->zone based on the zone ranges of the given node. |
| */ |
| void memory_block_add_nid(struct memory_block *mem, int nid, |
| enum meminit_context context) |
| { |
| if (context == MEMINIT_EARLY && mem->nid != nid) { |
| /* |
| * For early memory we have to determine the zone when setting |
| * the node id and handle multiple nodes spanning a single |
| * memory block by indicate via zone == NULL that we're not |
| * dealing with a single zone. So if we're setting the node id |
| * the first time, determine if there is a single zone. If we're |
| * setting the node id a second time to a different node, |
| * invalidate the single detected zone. |
| */ |
| if (mem->nid == NUMA_NO_NODE) |
| mem->zone = early_node_zone_for_memory_block(mem, nid); |
| else |
| mem->zone = NULL; |
| } |
| |
| /* |
| * If this memory block spans multiple nodes, we only indicate |
| * the last processed node. If we span multiple nodes (not applicable |
| * to hotplugged memory), zone == NULL will prohibit memory offlining |
| * and consequently unplug. |
| */ |
| mem->nid = nid; |
| } |
| #endif |
| |
| static int add_memory_block(unsigned long block_id, unsigned long state, |
| unsigned long nr_vmemmap_pages, |
| struct memory_group *group) |
| { |
| struct memory_block *mem; |
| int ret = 0; |
| |
| mem = find_memory_block_by_id(block_id); |
| if (mem) { |
| put_device(&mem->dev); |
| return -EEXIST; |
| } |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| |
| mem->start_section_nr = block_id * sections_per_block; |
| mem->state = state; |
| mem->nid = NUMA_NO_NODE; |
| mem->nr_vmemmap_pages = nr_vmemmap_pages; |
| INIT_LIST_HEAD(&mem->group_next); |
| |
| #ifndef CONFIG_NUMA |
| if (state == MEM_ONLINE) |
| /* |
| * MEM_ONLINE at this point implies early memory. With NUMA, |
| * we'll determine the zone when setting the node id via |
| * memory_block_add_nid(). Memory hotplug updated the zone |
| * manually when memory onlining/offlining succeeds. |
| */ |
| mem->zone = early_node_zone_for_memory_block(mem, NUMA_NO_NODE); |
| #endif /* CONFIG_NUMA */ |
| |
| ret = __add_memory_block(mem); |
| if (ret) |
| return ret; |
| |
| if (group) { |
| mem->group = group; |
| list_add(&mem->group_next, &group->memory_blocks); |
| } |
| |
| return 0; |
| } |
| |
| static int __init add_boot_memory_block(unsigned long base_section_nr) |
| { |
| int section_count = 0; |
| unsigned long nr; |
| |
| for (nr = base_section_nr; nr < base_section_nr + sections_per_block; |
| nr++) |
| if (present_section_nr(nr)) |
| section_count++; |
| |
| if (section_count == 0) |
| return 0; |
| return add_memory_block(memory_block_id(base_section_nr), |
| MEM_ONLINE, 0, NULL); |
| } |
| |
| static int add_hotplug_memory_block(unsigned long block_id, |
| unsigned long nr_vmemmap_pages, |
| struct memory_group *group) |
| { |
| return add_memory_block(block_id, MEM_OFFLINE, nr_vmemmap_pages, group); |
| } |
| |
| static void remove_memory_block(struct memory_block *memory) |
| { |
| if (WARN_ON_ONCE(memory->dev.bus != &memory_subsys)) |
| return; |
| |
| WARN_ON(xa_erase(&memory_blocks, memory->dev.id) == NULL); |
| |
| if (memory->group) { |
| list_del(&memory->group_next); |
| memory->group = NULL; |
| } |
| |
| /* drop the ref. we got via find_memory_block() */ |
| put_device(&memory->dev); |
| device_unregister(&memory->dev); |
| } |
| |
| /* |
| * Create memory block devices for the given memory area. Start and size |
| * have to be aligned to memory block granularity. Memory block devices |
| * will be initialized as offline. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| int create_memory_block_devices(unsigned long start, unsigned long size, |
| unsigned long vmemmap_pages, |
| struct memory_group *group) |
| { |
| const unsigned long start_block_id = pfn_to_block_id(PFN_DOWN(start)); |
| unsigned long end_block_id = pfn_to_block_id(PFN_DOWN(start + size)); |
| struct memory_block *mem; |
| unsigned long block_id; |
| int ret = 0; |
| |
| if (WARN_ON_ONCE(!IS_ALIGNED(start, memory_block_size_bytes()) || |
| !IS_ALIGNED(size, memory_block_size_bytes()))) |
| return -EINVAL; |
| |
| for (block_id = start_block_id; block_id != end_block_id; block_id++) { |
| ret = add_hotplug_memory_block(block_id, vmemmap_pages, group); |
| if (ret) |
| break; |
| } |
| if (ret) { |
| end_block_id = block_id; |
| for (block_id = start_block_id; block_id != end_block_id; |
| block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (WARN_ON_ONCE(!mem)) |
| continue; |
| remove_memory_block(mem); |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * Remove memory block devices for the given memory area. Start and size |
| * have to be aligned to memory block granularity. Memory block devices |
| * have to be offline. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| void remove_memory_block_devices(unsigned long start, unsigned long size) |
| { |
| const unsigned long start_block_id = pfn_to_block_id(PFN_DOWN(start)); |
| const unsigned long end_block_id = pfn_to_block_id(PFN_DOWN(start + size)); |
| struct memory_block *mem; |
| unsigned long block_id; |
| |
| if (WARN_ON_ONCE(!IS_ALIGNED(start, memory_block_size_bytes()) || |
| !IS_ALIGNED(size, memory_block_size_bytes()))) |
| return; |
| |
| for (block_id = start_block_id; block_id != end_block_id; block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (WARN_ON_ONCE(!mem)) |
| continue; |
| unregister_memory_block_under_nodes(mem); |
| remove_memory_block(mem); |
| } |
| } |
| |
| /* return true if the memory block is offlined, otherwise, return false */ |
| bool is_memblock_offlined(struct memory_block *mem) |
| { |
| return mem->state == MEM_OFFLINE; |
| } |
| |
| static struct attribute *memory_root_attrs[] = { |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| &dev_attr_probe.attr, |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| &dev_attr_soft_offline_page.attr, |
| &dev_attr_hard_offline_page.attr, |
| #endif |
| |
| &dev_attr_block_size_bytes.attr, |
| &dev_attr_auto_online_blocks.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group memory_root_attr_group = { |
| .attrs = memory_root_attrs, |
| }; |
| |
| static const struct attribute_group *memory_root_attr_groups[] = { |
| &memory_root_attr_group, |
| NULL, |
| }; |
| |
| /* |
| * Initialize the sysfs support for memory devices. At the time this function |
| * is called, we cannot have concurrent creation/deletion of memory block |
| * devices, the device_hotplug_lock is not needed. |
| */ |
| void __init memory_dev_init(void) |
| { |
| int ret; |
| unsigned long block_sz, nr; |
| |
| /* Validate the configured memory block size */ |
| block_sz = memory_block_size_bytes(); |
| if (!is_power_of_2(block_sz) || block_sz < MIN_MEMORY_BLOCK_SIZE) |
| panic("Memory block size not suitable: 0x%lx\n", block_sz); |
| sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE; |
| |
| ret = subsys_system_register(&memory_subsys, memory_root_attr_groups); |
| if (ret) |
| panic("%s() failed to register subsystem: %d\n", __func__, ret); |
| |
| /* |
| * Create entries for memory sections that were found |
| * during boot and have been initialized |
| */ |
| for (nr = 0; nr <= __highest_present_section_nr; |
| nr += sections_per_block) { |
| ret = add_boot_memory_block(nr); |
| if (ret) |
| panic("%s() failed to add memory block: %d\n", __func__, |
| ret); |
| } |
| } |
| |
| /** |
| * walk_memory_blocks - walk through all present memory blocks overlapped |
| * by the range [start, start + size) |
| * |
| * @start: start address of the memory range |
| * @size: size of the memory range |
| * @arg: argument passed to func |
| * @func: callback for each memory section walked |
| * |
| * This function walks through all present memory blocks overlapped by the |
| * range [start, start + size), calling func on each memory block. |
| * |
| * In case func() returns an error, walking is aborted and the error is |
| * returned. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| int walk_memory_blocks(unsigned long start, unsigned long size, |
| void *arg, walk_memory_blocks_func_t func) |
| { |
| const unsigned long start_block_id = phys_to_block_id(start); |
| const unsigned long end_block_id = phys_to_block_id(start + size - 1); |
| struct memory_block *mem; |
| unsigned long block_id; |
| int ret = 0; |
| |
| if (!size) |
| return 0; |
| |
| for (block_id = start_block_id; block_id <= end_block_id; block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (!mem) |
| continue; |
| |
| ret = func(mem, arg); |
| put_device(&mem->dev); |
| if (ret) |
| break; |
| } |
| return ret; |
| } |
| |
| struct for_each_memory_block_cb_data { |
| walk_memory_blocks_func_t func; |
| void *arg; |
| }; |
| |
| static int for_each_memory_block_cb(struct device *dev, void *data) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| struct for_each_memory_block_cb_data *cb_data = data; |
| |
| return cb_data->func(mem, cb_data->arg); |
| } |
| |
| /** |
| * for_each_memory_block - walk through all present memory blocks |
| * |
| * @arg: argument passed to func |
| * @func: callback for each memory block walked |
| * |
| * This function walks through all present memory blocks, calling func on |
| * each memory block. |
| * |
| * In case func() returns an error, walking is aborted and the error is |
| * returned. |
| */ |
| int for_each_memory_block(void *arg, walk_memory_blocks_func_t func) |
| { |
| struct for_each_memory_block_cb_data cb_data = { |
| .func = func, |
| .arg = arg, |
| }; |
| |
| return bus_for_each_dev(&memory_subsys, NULL, &cb_data, |
| for_each_memory_block_cb); |
| } |
| |
| /* |
| * This is an internal helper to unify allocation and initialization of |
| * memory groups. Note that the passed memory group will be copied to a |
| * dynamically allocated memory group. After this call, the passed |
| * memory group should no longer be used. |
| */ |
| static int memory_group_register(struct memory_group group) |
| { |
| struct memory_group *new_group; |
| uint32_t mgid; |
| int ret; |
| |
| if (!node_possible(group.nid)) |
| return -EINVAL; |
| |
| new_group = kzalloc(sizeof(group), GFP_KERNEL); |
| if (!new_group) |
| return -ENOMEM; |
| *new_group = group; |
| INIT_LIST_HEAD(&new_group->memory_blocks); |
| |
| ret = xa_alloc(&memory_groups, &mgid, new_group, xa_limit_31b, |
| GFP_KERNEL); |
| if (ret) { |
| kfree(new_group); |
| return ret; |
| } else if (group.is_dynamic) { |
| xa_set_mark(&memory_groups, mgid, MEMORY_GROUP_MARK_DYNAMIC); |
| } |
| return mgid; |
| } |
| |
| /** |
| * memory_group_register_static() - Register a static memory group. |
| * @nid: The node id. |
| * @max_pages: The maximum number of pages we'll have in this static memory |
| * group. |
| * |
| * Register a new static memory group and return the memory group id. |
| * All memory in the group belongs to a single unit, such as a DIMM. All |
| * memory belonging to a static memory group is added in one go to be removed |
| * in one go -- it's static. |
| * |
| * Returns an error if out of memory, if the node id is invalid, if no new |
| * memory groups can be registered, or if max_pages is invalid (0). Otherwise, |
| * returns the new memory group id. |
| */ |
| int memory_group_register_static(int nid, unsigned long max_pages) |
| { |
| struct memory_group group = { |
| .nid = nid, |
| .s = { |
| .max_pages = max_pages, |
| }, |
| }; |
| |
| if (!max_pages) |
| return -EINVAL; |
| return memory_group_register(group); |
| } |
| EXPORT_SYMBOL_GPL(memory_group_register_static); |
| |
| /** |
| * memory_group_register_dynamic() - Register a dynamic memory group. |
| * @nid: The node id. |
| * @unit_pages: Unit in pages in which is memory added/removed in this dynamic |
| * memory group. |
| * |
| * Register a new dynamic memory group and return the memory group id. |
| * Memory within a dynamic memory group is added/removed dynamically |
| * in unit_pages. |
| * |
| * Returns an error if out of memory, if the node id is invalid, if no new |
| * memory groups can be registered, or if unit_pages is invalid (0, not a |
| * power of two, smaller than a single memory block). Otherwise, returns the |
| * new memory group id. |
| */ |
| int memory_group_register_dynamic(int nid, unsigned long unit_pages) |
| { |
| struct memory_group group = { |
| .nid = nid, |
| .is_dynamic = true, |
| .d = { |
| .unit_pages = unit_pages, |
| }, |
| }; |
| |
| if (!unit_pages || !is_power_of_2(unit_pages) || |
| unit_pages < PHYS_PFN(memory_block_size_bytes())) |
| return -EINVAL; |
| return memory_group_register(group); |
| } |
| EXPORT_SYMBOL_GPL(memory_group_register_dynamic); |
| |
| /** |
| * memory_group_unregister() - Unregister a memory group. |
| * @mgid: the memory group id |
| * |
| * Unregister a memory group. If any memory block still belongs to this |
| * memory group, unregistering will fail. |
| * |
| * Returns -EINVAL if the memory group id is invalid, returns -EBUSY if some |
| * memory blocks still belong to this memory group and returns 0 if |
| * unregistering succeeded. |
| */ |
| int memory_group_unregister(int mgid) |
| { |
| struct memory_group *group; |
| |
| if (mgid < 0) |
| return -EINVAL; |
| |
| group = xa_load(&memory_groups, mgid); |
| if (!group) |
| return -EINVAL; |
| if (!list_empty(&group->memory_blocks)) |
| return -EBUSY; |
| xa_erase(&memory_groups, mgid); |
| kfree(group); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(memory_group_unregister); |
| |
| /* |
| * This is an internal helper only to be used in core memory hotplug code to |
| * lookup a memory group. We don't care about locking, as we don't expect a |
| * memory group to get unregistered while adding memory to it -- because |
| * the group and the memory is managed by the same driver. |
| */ |
| struct memory_group *memory_group_find_by_id(int mgid) |
| { |
| return xa_load(&memory_groups, mgid); |
| } |
| |
| /* |
| * This is an internal helper only to be used in core memory hotplug code to |
| * walk all dynamic memory groups excluding a given memory group, either |
| * belonging to a specific node, or belonging to any node. |
| */ |
| int walk_dynamic_memory_groups(int nid, walk_memory_groups_func_t func, |
| struct memory_group *excluded, void *arg) |
| { |
| struct memory_group *group; |
| unsigned long index; |
| int ret = 0; |
| |
| xa_for_each_marked(&memory_groups, index, group, |
| MEMORY_GROUP_MARK_DYNAMIC) { |
| if (group == excluded) |
| continue; |
| #ifdef CONFIG_NUMA |
| if (nid != NUMA_NO_NODE && group->nid != nid) |
| continue; |
| #endif /* CONFIG_NUMA */ |
| ret = func(group, arg); |
| if (ret) |
| break; |
| } |
| return ret; |
| } |