| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Ingenic JZ47xx KMS driver |
| // |
| // Copyright (C) 2019, Paul Cercueil <paul@crapouillou.net> |
| |
| #include "ingenic-drm.h" |
| |
| #include <linux/component.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_device.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_color_mgmt.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_irq.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_plane.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_simple_kms_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| struct ingenic_dma_hwdesc { |
| u32 next; |
| u32 addr; |
| u32 id; |
| u32 cmd; |
| } __aligned(16); |
| |
| struct ingenic_dma_hwdescs { |
| struct ingenic_dma_hwdesc hwdesc_f0; |
| struct ingenic_dma_hwdesc hwdesc_f1; |
| struct ingenic_dma_hwdesc hwdesc_pal; |
| u16 palette[256] __aligned(16); |
| }; |
| |
| struct jz_soc_info { |
| bool needs_dev_clk; |
| bool has_osd; |
| unsigned int max_width, max_height; |
| const u32 *formats_f0, *formats_f1; |
| unsigned int num_formats_f0, num_formats_f1; |
| }; |
| |
| struct ingenic_drm { |
| struct drm_device drm; |
| /* |
| * f1 (aka. foreground1) is our primary plane, on top of which |
| * f0 (aka. foreground0) can be overlayed. Z-order is fixed in |
| * hardware and cannot be changed. |
| */ |
| struct drm_plane f0, f1, *ipu_plane; |
| struct drm_crtc crtc; |
| |
| struct device *dev; |
| struct regmap *map; |
| struct clk *lcd_clk, *pix_clk; |
| const struct jz_soc_info *soc_info; |
| |
| struct ingenic_dma_hwdescs *dma_hwdescs; |
| dma_addr_t dma_hwdescs_phys; |
| |
| bool panel_is_sharp; |
| bool no_vblank; |
| |
| /* |
| * clk_mutex is used to synchronize the pixel clock rate update with |
| * the VBLANK. When the pixel clock's parent clock needs to be updated, |
| * clock_nb's notifier function will lock the mutex, then wait until the |
| * next VBLANK. At that point, the parent clock's rate can be updated, |
| * and the mutex is then unlocked. If an atomic commit happens in the |
| * meantime, it will lock on the mutex, effectively waiting until the |
| * clock update process finishes. Finally, the pixel clock's rate will |
| * be recomputed when the mutex has been released, in the pending atomic |
| * commit, or a future one. |
| */ |
| struct mutex clk_mutex; |
| bool update_clk_rate; |
| struct notifier_block clock_nb; |
| }; |
| |
| static bool ingenic_drm_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case JZ_REG_LCD_IID: |
| case JZ_REG_LCD_SA0: |
| case JZ_REG_LCD_FID0: |
| case JZ_REG_LCD_CMD0: |
| case JZ_REG_LCD_SA1: |
| case JZ_REG_LCD_FID1: |
| case JZ_REG_LCD_CMD1: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static const struct regmap_config ingenic_drm_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| |
| .max_register = JZ_REG_LCD_SIZE1, |
| .writeable_reg = ingenic_drm_writeable_reg, |
| }; |
| |
| static inline struct ingenic_drm *drm_device_get_priv(struct drm_device *drm) |
| { |
| return container_of(drm, struct ingenic_drm, drm); |
| } |
| |
| static inline struct ingenic_drm *drm_crtc_get_priv(struct drm_crtc *crtc) |
| { |
| return container_of(crtc, struct ingenic_drm, crtc); |
| } |
| |
| static inline struct ingenic_drm *drm_nb_get_priv(struct notifier_block *nb) |
| { |
| return container_of(nb, struct ingenic_drm, clock_nb); |
| } |
| |
| static int ingenic_drm_update_pixclk(struct notifier_block *nb, |
| unsigned long action, |
| void *data) |
| { |
| struct ingenic_drm *priv = drm_nb_get_priv(nb); |
| |
| switch (action) { |
| case PRE_RATE_CHANGE: |
| mutex_lock(&priv->clk_mutex); |
| priv->update_clk_rate = true; |
| drm_crtc_wait_one_vblank(&priv->crtc); |
| return NOTIFY_OK; |
| default: |
| mutex_unlock(&priv->clk_mutex); |
| return NOTIFY_OK; |
| } |
| } |
| |
| static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| |
| regmap_write(priv->map, JZ_REG_LCD_STATE, 0); |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, |
| JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE, |
| JZ_LCD_CTRL_ENABLE); |
| |
| drm_crtc_vblank_on(crtc); |
| } |
| |
| static void ingenic_drm_crtc_atomic_disable(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| unsigned int var; |
| |
| drm_crtc_vblank_off(crtc); |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, |
| JZ_LCD_CTRL_DISABLE, JZ_LCD_CTRL_DISABLE); |
| |
| regmap_read_poll_timeout(priv->map, JZ_REG_LCD_STATE, var, |
| var & JZ_LCD_STATE_DISABLED, |
| 1000, 0); |
| } |
| |
| static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv, |
| struct drm_display_mode *mode) |
| { |
| unsigned int vpe, vds, vde, vt, hpe, hds, hde, ht; |
| |
| vpe = mode->vsync_end - mode->vsync_start; |
| vds = mode->vtotal - mode->vsync_start; |
| vde = vds + mode->vdisplay; |
| vt = vde + mode->vsync_start - mode->vdisplay; |
| |
| hpe = mode->hsync_end - mode->hsync_start; |
| hds = mode->htotal - mode->hsync_start; |
| hde = hds + mode->hdisplay; |
| ht = hde + mode->hsync_start - mode->hdisplay; |
| |
| regmap_write(priv->map, JZ_REG_LCD_VSYNC, |
| 0 << JZ_LCD_VSYNC_VPS_OFFSET | |
| vpe << JZ_LCD_VSYNC_VPE_OFFSET); |
| |
| regmap_write(priv->map, JZ_REG_LCD_HSYNC, |
| 0 << JZ_LCD_HSYNC_HPS_OFFSET | |
| hpe << JZ_LCD_HSYNC_HPE_OFFSET); |
| |
| regmap_write(priv->map, JZ_REG_LCD_VAT, |
| ht << JZ_LCD_VAT_HT_OFFSET | |
| vt << JZ_LCD_VAT_VT_OFFSET); |
| |
| regmap_write(priv->map, JZ_REG_LCD_DAH, |
| hds << JZ_LCD_DAH_HDS_OFFSET | |
| hde << JZ_LCD_DAH_HDE_OFFSET); |
| regmap_write(priv->map, JZ_REG_LCD_DAV, |
| vds << JZ_LCD_DAV_VDS_OFFSET | |
| vde << JZ_LCD_DAV_VDE_OFFSET); |
| |
| if (priv->panel_is_sharp) { |
| regmap_write(priv->map, JZ_REG_LCD_PS, hde << 16 | (hde + 1)); |
| regmap_write(priv->map, JZ_REG_LCD_CLS, hde << 16 | (hde + 1)); |
| regmap_write(priv->map, JZ_REG_LCD_SPL, hpe << 16 | (hpe + 1)); |
| regmap_write(priv->map, JZ_REG_LCD_REV, mode->htotal << 16); |
| } |
| |
| regmap_set_bits(priv->map, JZ_REG_LCD_CTRL, |
| JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16); |
| |
| /* |
| * IPU restart - specify how much time the LCDC will wait before |
| * transferring a new frame from the IPU. The value is the one |
| * suggested in the programming manual. |
| */ |
| regmap_write(priv->map, JZ_REG_LCD_IPUR, JZ_LCD_IPUR_IPUREN | |
| (ht * vpe / 3) << JZ_LCD_IPUR_IPUR_LSB); |
| } |
| |
| static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, |
| crtc); |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| struct drm_plane_state *f1_state, *f0_state, *ipu_state = NULL; |
| |
| if (crtc_state->gamma_lut && |
| drm_color_lut_size(crtc_state->gamma_lut) != ARRAY_SIZE(priv->dma_hwdescs->palette)) { |
| dev_dbg(priv->dev, "Invalid palette size\n"); |
| return -EINVAL; |
| } |
| |
| if (drm_atomic_crtc_needs_modeset(crtc_state) && priv->soc_info->has_osd) { |
| f1_state = drm_atomic_get_plane_state(crtc_state->state, |
| &priv->f1); |
| if (IS_ERR(f1_state)) |
| return PTR_ERR(f1_state); |
| |
| f0_state = drm_atomic_get_plane_state(crtc_state->state, |
| &priv->f0); |
| if (IS_ERR(f0_state)) |
| return PTR_ERR(f0_state); |
| |
| if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU) && priv->ipu_plane) { |
| ipu_state = drm_atomic_get_plane_state(crtc_state->state, |
| priv->ipu_plane); |
| if (IS_ERR(ipu_state)) |
| return PTR_ERR(ipu_state); |
| |
| /* IPU and F1 planes cannot be enabled at the same time. */ |
| if (f1_state->fb && ipu_state->fb) { |
| dev_dbg(priv->dev, "Cannot enable both F1 and IPU\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* If all the planes are disabled, we won't get a VBLANK IRQ */ |
| priv->no_vblank = !f1_state->fb && !f0_state->fb && |
| !(ipu_state && ipu_state->fb); |
| } |
| |
| return 0; |
| } |
| |
| static enum drm_mode_status |
| ingenic_drm_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| long rate; |
| |
| if (mode->hdisplay > priv->soc_info->max_width) |
| return MODE_BAD_HVALUE; |
| if (mode->vdisplay > priv->soc_info->max_height) |
| return MODE_BAD_VVALUE; |
| |
| rate = clk_round_rate(priv->pix_clk, mode->clock * 1000); |
| if (rate < 0) |
| return MODE_CLOCK_RANGE; |
| |
| return MODE_OK; |
| } |
| |
| static void ingenic_drm_crtc_atomic_begin(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, |
| crtc); |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| u32 ctrl = 0; |
| |
| if (priv->soc_info->has_osd && |
| drm_atomic_crtc_needs_modeset(crtc_state)) { |
| /* |
| * If IPU plane is enabled, enable IPU as source for the F1 |
| * plane; otherwise use regular DMA. |
| */ |
| if (priv->ipu_plane && priv->ipu_plane->state->fb) |
| ctrl |= JZ_LCD_OSDCTRL_IPU; |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_OSDCTRL, |
| JZ_LCD_OSDCTRL_IPU, ctrl); |
| } |
| } |
| |
| static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, |
| crtc); |
| struct drm_pending_vblank_event *event = crtc_state->event; |
| |
| if (drm_atomic_crtc_needs_modeset(crtc_state)) { |
| ingenic_drm_crtc_update_timings(priv, &crtc_state->mode); |
| priv->update_clk_rate = true; |
| } |
| |
| if (priv->update_clk_rate) { |
| mutex_lock(&priv->clk_mutex); |
| clk_set_rate(priv->pix_clk, |
| crtc_state->adjusted_mode.clock * 1000); |
| priv->update_clk_rate = false; |
| mutex_unlock(&priv->clk_mutex); |
| } |
| |
| if (event) { |
| crtc_state->event = NULL; |
| |
| spin_lock_irq(&crtc->dev->event_lock); |
| if (drm_crtc_vblank_get(crtc) == 0) |
| drm_crtc_arm_vblank_event(crtc, event); |
| else |
| drm_crtc_send_vblank_event(crtc, event); |
| spin_unlock_irq(&crtc->dev->event_lock); |
| } |
| } |
| |
| static int ingenic_drm_plane_atomic_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct ingenic_drm *priv = drm_device_get_priv(plane->dev); |
| struct drm_crtc_state *crtc_state; |
| struct drm_crtc *crtc = state->crtc ?: plane->state->crtc; |
| int ret; |
| |
| if (!crtc) |
| return 0; |
| |
| crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| ret = drm_atomic_helper_check_plane_state(state, crtc_state, |
| DRM_PLANE_HELPER_NO_SCALING, |
| DRM_PLANE_HELPER_NO_SCALING, |
| priv->soc_info->has_osd, |
| true); |
| if (ret) |
| return ret; |
| |
| /* |
| * If OSD is not available, check that the width/height match. |
| * Note that state->src_* are in 16.16 fixed-point format. |
| */ |
| if (!priv->soc_info->has_osd && |
| (state->src_x != 0 || |
| (state->src_w >> 16) != state->crtc_w || |
| (state->src_h >> 16) != state->crtc_h)) |
| return -EINVAL; |
| |
| /* |
| * Require full modeset if enabling or disabling a plane, or changing |
| * its position, size or depth. |
| */ |
| if (priv->soc_info->has_osd && |
| (!plane->state->fb || !state->fb || |
| plane->state->crtc_x != state->crtc_x || |
| plane->state->crtc_y != state->crtc_y || |
| plane->state->crtc_w != state->crtc_w || |
| plane->state->crtc_h != state->crtc_h || |
| plane->state->fb->format->format != state->fb->format->format)) |
| crtc_state->mode_changed = true; |
| |
| return 0; |
| } |
| |
| static void ingenic_drm_plane_enable(struct ingenic_drm *priv, |
| struct drm_plane *plane) |
| { |
| unsigned int en_bit; |
| |
| if (priv->soc_info->has_osd) { |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) |
| en_bit = JZ_LCD_OSDC_F1EN; |
| else |
| en_bit = JZ_LCD_OSDC_F0EN; |
| |
| regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, en_bit); |
| } |
| } |
| |
| void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane) |
| { |
| struct ingenic_drm *priv = dev_get_drvdata(dev); |
| unsigned int en_bit; |
| |
| if (priv->soc_info->has_osd) { |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) |
| en_bit = JZ_LCD_OSDC_F1EN; |
| else |
| en_bit = JZ_LCD_OSDC_F0EN; |
| |
| regmap_clear_bits(priv->map, JZ_REG_LCD_OSDC, en_bit); |
| } |
| } |
| |
| static void ingenic_drm_plane_atomic_disable(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct ingenic_drm *priv = drm_device_get_priv(plane->dev); |
| |
| ingenic_drm_plane_disable(priv->dev, plane); |
| } |
| |
| void ingenic_drm_plane_config(struct device *dev, |
| struct drm_plane *plane, u32 fourcc) |
| { |
| struct ingenic_drm *priv = dev_get_drvdata(dev); |
| struct drm_plane_state *state = plane->state; |
| unsigned int xy_reg, size_reg; |
| unsigned int ctrl = 0; |
| |
| ingenic_drm_plane_enable(priv, plane); |
| |
| if (priv->soc_info->has_osd && |
| plane->type == DRM_PLANE_TYPE_PRIMARY) { |
| switch (fourcc) { |
| case DRM_FORMAT_XRGB1555: |
| ctrl |= JZ_LCD_OSDCTRL_RGB555; |
| fallthrough; |
| case DRM_FORMAT_RGB565: |
| ctrl |= JZ_LCD_OSDCTRL_BPP_15_16; |
| break; |
| case DRM_FORMAT_RGB888: |
| ctrl |= JZ_LCD_OSDCTRL_BPP_24_COMP; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| ctrl |= JZ_LCD_OSDCTRL_BPP_18_24; |
| break; |
| case DRM_FORMAT_XRGB2101010: |
| ctrl |= JZ_LCD_OSDCTRL_BPP_30; |
| break; |
| } |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_OSDCTRL, |
| JZ_LCD_OSDCTRL_BPP_MASK, ctrl); |
| } else { |
| switch (fourcc) { |
| case DRM_FORMAT_C8: |
| ctrl |= JZ_LCD_CTRL_BPP_8; |
| break; |
| case DRM_FORMAT_XRGB1555: |
| ctrl |= JZ_LCD_CTRL_RGB555; |
| fallthrough; |
| case DRM_FORMAT_RGB565: |
| ctrl |= JZ_LCD_CTRL_BPP_15_16; |
| break; |
| case DRM_FORMAT_RGB888: |
| ctrl |= JZ_LCD_CTRL_BPP_24_COMP; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| ctrl |= JZ_LCD_CTRL_BPP_18_24; |
| break; |
| case DRM_FORMAT_XRGB2101010: |
| ctrl |= JZ_LCD_CTRL_BPP_30; |
| break; |
| } |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, |
| JZ_LCD_CTRL_BPP_MASK, ctrl); |
| } |
| |
| if (priv->soc_info->has_osd) { |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) { |
| xy_reg = JZ_REG_LCD_XYP1; |
| size_reg = JZ_REG_LCD_SIZE1; |
| } else { |
| xy_reg = JZ_REG_LCD_XYP0; |
| size_reg = JZ_REG_LCD_SIZE0; |
| } |
| |
| regmap_write(priv->map, xy_reg, |
| state->crtc_x << JZ_LCD_XYP01_XPOS_LSB | |
| state->crtc_y << JZ_LCD_XYP01_YPOS_LSB); |
| regmap_write(priv->map, size_reg, |
| state->crtc_w << JZ_LCD_SIZE01_WIDTH_LSB | |
| state->crtc_h << JZ_LCD_SIZE01_HEIGHT_LSB); |
| } |
| } |
| |
| static void ingenic_drm_update_palette(struct ingenic_drm *priv, |
| const struct drm_color_lut *lut) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(priv->dma_hwdescs->palette); i++) { |
| u16 color = drm_color_lut_extract(lut[i].red, 5) << 11 |
| | drm_color_lut_extract(lut[i].green, 6) << 5 |
| | drm_color_lut_extract(lut[i].blue, 5); |
| |
| priv->dma_hwdescs->palette[i] = color; |
| } |
| } |
| |
| static void ingenic_drm_plane_atomic_update(struct drm_plane *plane, |
| struct drm_plane_state *oldstate) |
| { |
| struct ingenic_drm *priv = drm_device_get_priv(plane->dev); |
| struct drm_plane_state *state = plane->state; |
| struct drm_crtc_state *crtc_state; |
| struct ingenic_dma_hwdesc *hwdesc; |
| unsigned int width, height, cpp, offset; |
| dma_addr_t addr; |
| u32 fourcc; |
| |
| if (state && state->fb) { |
| crtc_state = state->crtc->state; |
| |
| addr = drm_fb_cma_get_gem_addr(state->fb, state, 0); |
| width = state->src_w >> 16; |
| height = state->src_h >> 16; |
| cpp = state->fb->format->cpp[0]; |
| |
| if (priv->soc_info->has_osd && plane->type == DRM_PLANE_TYPE_OVERLAY) |
| hwdesc = &priv->dma_hwdescs->hwdesc_f0; |
| else |
| hwdesc = &priv->dma_hwdescs->hwdesc_f1; |
| |
| hwdesc->addr = addr; |
| hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4); |
| |
| if (drm_atomic_crtc_needs_modeset(crtc_state)) { |
| fourcc = state->fb->format->format; |
| |
| ingenic_drm_plane_config(priv->dev, plane, fourcc); |
| |
| if (fourcc == DRM_FORMAT_C8) |
| offset = offsetof(struct ingenic_dma_hwdescs, hwdesc_pal); |
| else |
| offset = offsetof(struct ingenic_dma_hwdescs, hwdesc_f0); |
| |
| priv->dma_hwdescs->hwdesc_f0.next = priv->dma_hwdescs_phys + offset; |
| |
| crtc_state->color_mgmt_changed = fourcc == DRM_FORMAT_C8; |
| } |
| |
| if (crtc_state->color_mgmt_changed) |
| ingenic_drm_update_palette(priv, crtc_state->gamma_lut->data); |
| } |
| } |
| |
| static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct ingenic_drm *priv = drm_device_get_priv(encoder->dev); |
| struct drm_display_mode *mode = &crtc_state->adjusted_mode; |
| struct drm_connector *conn = conn_state->connector; |
| struct drm_display_info *info = &conn->display_info; |
| unsigned int cfg; |
| |
| priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS; |
| |
| if (priv->panel_is_sharp) { |
| cfg = JZ_LCD_CFG_MODE_SPECIAL_TFT_1 | JZ_LCD_CFG_REV_POLARITY; |
| } else { |
| cfg = JZ_LCD_CFG_PS_DISABLE | JZ_LCD_CFG_CLS_DISABLE |
| | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE; |
| } |
| |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW; |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| cfg |= JZ_LCD_CFG_VSYNC_ACTIVE_LOW; |
| if (info->bus_flags & DRM_BUS_FLAG_DE_LOW) |
| cfg |= JZ_LCD_CFG_DE_ACTIVE_LOW; |
| if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) |
| cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE; |
| |
| if (!priv->panel_is_sharp) { |
| if (conn->connector_type == DRM_MODE_CONNECTOR_TV) { |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| cfg |= JZ_LCD_CFG_MODE_TV_OUT_I; |
| else |
| cfg |= JZ_LCD_CFG_MODE_TV_OUT_P; |
| } else { |
| switch (*info->bus_formats) { |
| case MEDIA_BUS_FMT_RGB565_1X16: |
| cfg |= JZ_LCD_CFG_MODE_GENERIC_16BIT; |
| break; |
| case MEDIA_BUS_FMT_RGB666_1X18: |
| cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT; |
| break; |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT; |
| break; |
| case MEDIA_BUS_FMT_RGB888_3X8: |
| cfg |= JZ_LCD_CFG_MODE_8BIT_SERIAL; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| regmap_write(priv->map, JZ_REG_LCD_CFG, cfg); |
| } |
| |
| static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_display_info *info = &conn_state->connector->display_info; |
| |
| if (info->num_bus_formats != 1) |
| return -EINVAL; |
| |
| if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV) |
| return 0; |
| |
| switch (*info->bus_formats) { |
| case MEDIA_BUS_FMT_RGB565_1X16: |
| case MEDIA_BUS_FMT_RGB666_1X18: |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| case MEDIA_BUS_FMT_RGB888_3X8: |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void ingenic_drm_atomic_helper_commit_tail(struct drm_atomic_state *old_state) |
| { |
| /* |
| * Just your regular drm_atomic_helper_commit_tail(), but only calls |
| * drm_atomic_helper_wait_for_vblanks() if priv->no_vblank. |
| */ |
| struct drm_device *dev = old_state->dev; |
| struct ingenic_drm *priv = drm_device_get_priv(dev); |
| |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| |
| drm_atomic_helper_commit_planes(dev, old_state, 0); |
| |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| |
| drm_atomic_helper_commit_hw_done(old_state); |
| |
| if (!priv->no_vblank) |
| drm_atomic_helper_wait_for_vblanks(dev, old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| } |
| |
| static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg) |
| { |
| struct ingenic_drm *priv = drm_device_get_priv(arg); |
| unsigned int state; |
| |
| regmap_read(priv->map, JZ_REG_LCD_STATE, &state); |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_STATE, |
| JZ_LCD_STATE_EOF_IRQ, 0); |
| |
| if (state & JZ_LCD_STATE_EOF_IRQ) |
| drm_crtc_handle_vblank(&priv->crtc); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ingenic_drm_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, |
| JZ_LCD_CTRL_EOF_IRQ, JZ_LCD_CTRL_EOF_IRQ); |
| |
| return 0; |
| } |
| |
| static void ingenic_drm_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct ingenic_drm *priv = drm_crtc_get_priv(crtc); |
| |
| regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, JZ_LCD_CTRL_EOF_IRQ, 0); |
| } |
| |
| DEFINE_DRM_GEM_CMA_FOPS(ingenic_drm_fops); |
| |
| static const struct drm_driver ingenic_drm_driver_data = { |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, |
| .name = "ingenic-drm", |
| .desc = "DRM module for Ingenic SoCs", |
| .date = "20200716", |
| .major = 1, |
| .minor = 1, |
| .patchlevel = 0, |
| |
| .fops = &ingenic_drm_fops, |
| DRM_GEM_CMA_DRIVER_OPS, |
| |
| .irq_handler = ingenic_drm_irq_handler, |
| }; |
| |
| static const struct drm_plane_funcs ingenic_drm_primary_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .reset = drm_atomic_helper_plane_reset, |
| .destroy = drm_plane_cleanup, |
| |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| }; |
| |
| static const struct drm_crtc_funcs ingenic_drm_crtc_funcs = { |
| .set_config = drm_atomic_helper_set_config, |
| .page_flip = drm_atomic_helper_page_flip, |
| .reset = drm_atomic_helper_crtc_reset, |
| .destroy = drm_crtc_cleanup, |
| |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| |
| .enable_vblank = ingenic_drm_enable_vblank, |
| .disable_vblank = ingenic_drm_disable_vblank, |
| |
| .gamma_set = drm_atomic_helper_legacy_gamma_set, |
| }; |
| |
| static const struct drm_plane_helper_funcs ingenic_drm_plane_helper_funcs = { |
| .atomic_update = ingenic_drm_plane_atomic_update, |
| .atomic_check = ingenic_drm_plane_atomic_check, |
| .atomic_disable = ingenic_drm_plane_atomic_disable, |
| .prepare_fb = drm_gem_fb_prepare_fb, |
| }; |
| |
| static const struct drm_crtc_helper_funcs ingenic_drm_crtc_helper_funcs = { |
| .atomic_enable = ingenic_drm_crtc_atomic_enable, |
| .atomic_disable = ingenic_drm_crtc_atomic_disable, |
| .atomic_begin = ingenic_drm_crtc_atomic_begin, |
| .atomic_flush = ingenic_drm_crtc_atomic_flush, |
| .atomic_check = ingenic_drm_crtc_atomic_check, |
| .mode_valid = ingenic_drm_crtc_mode_valid, |
| }; |
| |
| static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs = { |
| .atomic_mode_set = ingenic_drm_encoder_atomic_mode_set, |
| .atomic_check = ingenic_drm_encoder_atomic_check, |
| }; |
| |
| static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = { |
| .fb_create = drm_gem_fb_create, |
| .output_poll_changed = drm_fb_helper_output_poll_changed, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static struct drm_mode_config_helper_funcs ingenic_drm_mode_config_helpers = { |
| .atomic_commit_tail = ingenic_drm_atomic_helper_commit_tail, |
| }; |
| |
| static void ingenic_drm_unbind_all(void *d) |
| { |
| struct ingenic_drm *priv = d; |
| |
| component_unbind_all(priv->dev, &priv->drm); |
| } |
| |
| static void __maybe_unused ingenic_drm_release_rmem(void *d) |
| { |
| of_reserved_mem_device_release(d); |
| } |
| |
| static int ingenic_drm_bind(struct device *dev, bool has_components) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| const struct jz_soc_info *soc_info; |
| struct ingenic_drm *priv; |
| struct clk *parent_clk; |
| struct drm_bridge *bridge; |
| struct drm_panel *panel; |
| struct drm_encoder *encoder; |
| struct drm_device *drm; |
| void __iomem *base; |
| long parent_rate; |
| unsigned int i, clone_mask = 0; |
| dma_addr_t dma_hwdesc_phys_f0, dma_hwdesc_phys_f1; |
| int ret, irq; |
| |
| soc_info = of_device_get_match_data(dev); |
| if (!soc_info) { |
| dev_err(dev, "Missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_OF_RESERVED_MEM)) { |
| ret = of_reserved_mem_device_init(dev); |
| |
| if (ret && ret != -ENODEV) |
| dev_warn(dev, "Failed to get reserved memory: %d\n", ret); |
| |
| if (!ret) { |
| ret = devm_add_action_or_reset(dev, ingenic_drm_release_rmem, dev); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| priv = devm_drm_dev_alloc(dev, &ingenic_drm_driver_data, |
| struct ingenic_drm, drm); |
| if (IS_ERR(priv)) |
| return PTR_ERR(priv); |
| |
| priv->soc_info = soc_info; |
| priv->dev = dev; |
| drm = &priv->drm; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| ret = drmm_mode_config_init(drm); |
| if (ret) |
| return ret; |
| |
| drm->mode_config.min_width = 0; |
| drm->mode_config.min_height = 0; |
| drm->mode_config.max_width = soc_info->max_width; |
| drm->mode_config.max_height = 4095; |
| drm->mode_config.funcs = &ingenic_drm_mode_config_funcs; |
| drm->mode_config.helper_private = &ingenic_drm_mode_config_helpers; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) { |
| dev_err(dev, "Failed to get memory resource\n"); |
| return PTR_ERR(base); |
| } |
| |
| priv->map = devm_regmap_init_mmio(dev, base, |
| &ingenic_drm_regmap_config); |
| if (IS_ERR(priv->map)) { |
| dev_err(dev, "Failed to create regmap\n"); |
| return PTR_ERR(priv->map); |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| if (soc_info->needs_dev_clk) { |
| priv->lcd_clk = devm_clk_get(dev, "lcd"); |
| if (IS_ERR(priv->lcd_clk)) { |
| dev_err(dev, "Failed to get lcd clock\n"); |
| return PTR_ERR(priv->lcd_clk); |
| } |
| } |
| |
| priv->pix_clk = devm_clk_get(dev, "lcd_pclk"); |
| if (IS_ERR(priv->pix_clk)) { |
| dev_err(dev, "Failed to get pixel clock\n"); |
| return PTR_ERR(priv->pix_clk); |
| } |
| |
| priv->dma_hwdescs = dmam_alloc_coherent(dev, |
| sizeof(*priv->dma_hwdescs), |
| &priv->dma_hwdescs_phys, |
| GFP_KERNEL); |
| if (!priv->dma_hwdescs) |
| return -ENOMEM; |
| |
| |
| /* Configure DMA hwdesc for foreground0 plane */ |
| dma_hwdesc_phys_f0 = priv->dma_hwdescs_phys |
| + offsetof(struct ingenic_dma_hwdescs, hwdesc_f0); |
| priv->dma_hwdescs->hwdesc_f0.next = dma_hwdesc_phys_f0; |
| priv->dma_hwdescs->hwdesc_f0.id = 0xf0; |
| |
| /* Configure DMA hwdesc for foreground1 plane */ |
| dma_hwdesc_phys_f1 = priv->dma_hwdescs_phys |
| + offsetof(struct ingenic_dma_hwdescs, hwdesc_f1); |
| priv->dma_hwdescs->hwdesc_f1.next = dma_hwdesc_phys_f1; |
| priv->dma_hwdescs->hwdesc_f1.id = 0xf1; |
| |
| /* Configure DMA hwdesc for palette */ |
| priv->dma_hwdescs->hwdesc_pal.next = priv->dma_hwdescs_phys |
| + offsetof(struct ingenic_dma_hwdescs, hwdesc_f0); |
| priv->dma_hwdescs->hwdesc_pal.id = 0xc0; |
| priv->dma_hwdescs->hwdesc_pal.addr = priv->dma_hwdescs_phys |
| + offsetof(struct ingenic_dma_hwdescs, palette); |
| priv->dma_hwdescs->hwdesc_pal.cmd = JZ_LCD_CMD_ENABLE_PAL |
| | (sizeof(priv->dma_hwdescs->palette) / 4); |
| |
| if (soc_info->has_osd) |
| priv->ipu_plane = drm_plane_from_index(drm, 0); |
| |
| drm_plane_helper_add(&priv->f1, &ingenic_drm_plane_helper_funcs); |
| |
| ret = drm_universal_plane_init(drm, &priv->f1, 1, |
| &ingenic_drm_primary_plane_funcs, |
| priv->soc_info->formats_f1, |
| priv->soc_info->num_formats_f1, |
| NULL, DRM_PLANE_TYPE_PRIMARY, NULL); |
| if (ret) { |
| dev_err(dev, "Failed to register plane: %i\n", ret); |
| return ret; |
| } |
| |
| drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs); |
| |
| ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->f1, |
| NULL, &ingenic_drm_crtc_funcs, NULL); |
| if (ret) { |
| dev_err(dev, "Failed to init CRTC: %i\n", ret); |
| return ret; |
| } |
| |
| drm_crtc_enable_color_mgmt(&priv->crtc, 0, false, |
| ARRAY_SIZE(priv->dma_hwdescs->palette)); |
| |
| if (soc_info->has_osd) { |
| drm_plane_helper_add(&priv->f0, |
| &ingenic_drm_plane_helper_funcs); |
| |
| ret = drm_universal_plane_init(drm, &priv->f0, 1, |
| &ingenic_drm_primary_plane_funcs, |
| priv->soc_info->formats_f0, |
| priv->soc_info->num_formats_f0, |
| NULL, DRM_PLANE_TYPE_OVERLAY, |
| NULL); |
| if (ret) { |
| dev_err(dev, "Failed to register overlay plane: %i\n", |
| ret); |
| return ret; |
| } |
| |
| if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU) && has_components) { |
| ret = component_bind_all(dev, drm); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Failed to bind components: %i\n", ret); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(dev, ingenic_drm_unbind_all, priv); |
| if (ret) |
| return ret; |
| |
| priv->ipu_plane = drm_plane_from_index(drm, 2); |
| if (!priv->ipu_plane) { |
| dev_err(dev, "Failed to retrieve IPU plane\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| for (i = 0; ; i++) { |
| ret = drm_of_find_panel_or_bridge(dev->of_node, 0, i, &panel, &bridge); |
| if (ret) { |
| if (ret == -ENODEV) |
| break; /* we're done */ |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Failed to get bridge handle\n"); |
| return ret; |
| } |
| |
| if (panel) |
| bridge = devm_drm_panel_bridge_add_typed(dev, panel, |
| DRM_MODE_CONNECTOR_DPI); |
| |
| encoder = devm_kzalloc(dev, sizeof(*encoder), GFP_KERNEL); |
| if (!encoder) |
| return -ENOMEM; |
| |
| encoder->possible_crtcs = 1; |
| |
| drm_encoder_helper_add(encoder, &ingenic_drm_encoder_helper_funcs); |
| |
| ret = drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_DPI); |
| if (ret) { |
| dev_err(dev, "Failed to init encoder: %d\n", ret); |
| return ret; |
| } |
| |
| ret = drm_bridge_attach(encoder, bridge, NULL, 0); |
| if (ret) { |
| dev_err(dev, "Unable to attach bridge\n"); |
| return ret; |
| } |
| } |
| |
| drm_for_each_encoder(encoder, drm) { |
| clone_mask |= BIT(drm_encoder_index(encoder)); |
| } |
| |
| drm_for_each_encoder(encoder, drm) { |
| encoder->possible_clones = clone_mask; |
| } |
| |
| ret = drm_irq_install(drm, irq); |
| if (ret) { |
| dev_err(dev, "Unable to install IRQ handler\n"); |
| return ret; |
| } |
| |
| ret = drm_vblank_init(drm, 1); |
| if (ret) { |
| dev_err(dev, "Failed calling drm_vblank_init()\n"); |
| return ret; |
| } |
| |
| drm_mode_config_reset(drm); |
| |
| ret = clk_prepare_enable(priv->pix_clk); |
| if (ret) { |
| dev_err(dev, "Unable to start pixel clock\n"); |
| return ret; |
| } |
| |
| if (priv->lcd_clk) { |
| parent_clk = clk_get_parent(priv->lcd_clk); |
| parent_rate = clk_get_rate(parent_clk); |
| |
| /* LCD Device clock must be 3x the pixel clock for STN panels, |
| * or 1.5x the pixel clock for TFT panels. To avoid having to |
| * check for the LCD device clock everytime we do a mode change, |
| * we set the LCD device clock to the highest rate possible. |
| */ |
| ret = clk_set_rate(priv->lcd_clk, parent_rate); |
| if (ret) { |
| dev_err(dev, "Unable to set LCD clock rate\n"); |
| goto err_pixclk_disable; |
| } |
| |
| ret = clk_prepare_enable(priv->lcd_clk); |
| if (ret) { |
| dev_err(dev, "Unable to start lcd clock\n"); |
| goto err_pixclk_disable; |
| } |
| } |
| |
| /* Set address of our DMA descriptor chain */ |
| regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_phys_f0); |
| regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_phys_f1); |
| |
| /* Enable OSD if available */ |
| if (soc_info->has_osd) |
| regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN); |
| |
| mutex_init(&priv->clk_mutex); |
| priv->clock_nb.notifier_call = ingenic_drm_update_pixclk; |
| |
| parent_clk = clk_get_parent(priv->pix_clk); |
| ret = clk_notifier_register(parent_clk, &priv->clock_nb); |
| if (ret) { |
| dev_err(dev, "Unable to register clock notifier\n"); |
| goto err_devclk_disable; |
| } |
| |
| ret = drm_dev_register(drm, 0); |
| if (ret) { |
| dev_err(dev, "Failed to register DRM driver\n"); |
| goto err_clk_notifier_unregister; |
| } |
| |
| drm_fbdev_generic_setup(drm, 32); |
| |
| return 0; |
| |
| err_clk_notifier_unregister: |
| clk_notifier_unregister(parent_clk, &priv->clock_nb); |
| err_devclk_disable: |
| if (priv->lcd_clk) |
| clk_disable_unprepare(priv->lcd_clk); |
| err_pixclk_disable: |
| clk_disable_unprepare(priv->pix_clk); |
| return ret; |
| } |
| |
| static int ingenic_drm_bind_with_components(struct device *dev) |
| { |
| return ingenic_drm_bind(dev, true); |
| } |
| |
| static int compare_of(struct device *dev, void *data) |
| { |
| return dev->of_node == data; |
| } |
| |
| static void ingenic_drm_unbind(struct device *dev) |
| { |
| struct ingenic_drm *priv = dev_get_drvdata(dev); |
| struct clk *parent_clk = clk_get_parent(priv->pix_clk); |
| |
| clk_notifier_unregister(parent_clk, &priv->clock_nb); |
| if (priv->lcd_clk) |
| clk_disable_unprepare(priv->lcd_clk); |
| clk_disable_unprepare(priv->pix_clk); |
| |
| drm_dev_unregister(&priv->drm); |
| drm_atomic_helper_shutdown(&priv->drm); |
| } |
| |
| static const struct component_master_ops ingenic_master_ops = { |
| .bind = ingenic_drm_bind_with_components, |
| .unbind = ingenic_drm_unbind, |
| }; |
| |
| static int ingenic_drm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct component_match *match = NULL; |
| struct device_node *np; |
| |
| if (!IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) |
| return ingenic_drm_bind(dev, false); |
| |
| /* IPU is at port address 8 */ |
| np = of_graph_get_remote_node(dev->of_node, 8, 0); |
| if (!np) |
| return ingenic_drm_bind(dev, false); |
| |
| drm_of_component_match_add(dev, &match, compare_of, np); |
| of_node_put(np); |
| |
| return component_master_add_with_match(dev, &ingenic_master_ops, match); |
| } |
| |
| static int ingenic_drm_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| |
| if (!IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) |
| ingenic_drm_unbind(dev); |
| else |
| component_master_del(dev, &ingenic_master_ops); |
| |
| return 0; |
| } |
| |
| static const u32 jz4740_formats[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| }; |
| |
| static const u32 jz4725b_formats_f1[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| }; |
| |
| static const u32 jz4725b_formats_f0[] = { |
| DRM_FORMAT_C8, |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| }; |
| |
| static const u32 jz4770_formats_f1[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_RGB888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_XRGB2101010, |
| }; |
| |
| static const u32 jz4770_formats_f0[] = { |
| DRM_FORMAT_C8, |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_RGB888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_XRGB2101010, |
| }; |
| |
| static const struct jz_soc_info jz4740_soc_info = { |
| .needs_dev_clk = true, |
| .has_osd = false, |
| .max_width = 800, |
| .max_height = 600, |
| .formats_f1 = jz4740_formats, |
| .num_formats_f1 = ARRAY_SIZE(jz4740_formats), |
| /* JZ4740 has only one plane */ |
| }; |
| |
| static const struct jz_soc_info jz4725b_soc_info = { |
| .needs_dev_clk = false, |
| .has_osd = true, |
| .max_width = 800, |
| .max_height = 600, |
| .formats_f1 = jz4725b_formats_f1, |
| .num_formats_f1 = ARRAY_SIZE(jz4725b_formats_f1), |
| .formats_f0 = jz4725b_formats_f0, |
| .num_formats_f0 = ARRAY_SIZE(jz4725b_formats_f0), |
| }; |
| |
| static const struct jz_soc_info jz4770_soc_info = { |
| .needs_dev_clk = false, |
| .has_osd = true, |
| .max_width = 1280, |
| .max_height = 720, |
| .formats_f1 = jz4770_formats_f1, |
| .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1), |
| .formats_f0 = jz4770_formats_f0, |
| .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0), |
| }; |
| |
| static const struct of_device_id ingenic_drm_of_match[] = { |
| { .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info }, |
| { .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info }, |
| { .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, ingenic_drm_of_match); |
| |
| static struct platform_driver ingenic_drm_driver = { |
| .driver = { |
| .name = "ingenic-drm", |
| .of_match_table = of_match_ptr(ingenic_drm_of_match), |
| }, |
| .probe = ingenic_drm_probe, |
| .remove = ingenic_drm_remove, |
| }; |
| |
| static int ingenic_drm_init(void) |
| { |
| int err; |
| |
| if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) { |
| err = platform_driver_register(ingenic_ipu_driver_ptr); |
| if (err) |
| return err; |
| } |
| |
| return platform_driver_register(&ingenic_drm_driver); |
| } |
| module_init(ingenic_drm_init); |
| |
| static void ingenic_drm_exit(void) |
| { |
| platform_driver_unregister(&ingenic_drm_driver); |
| |
| if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) |
| platform_driver_unregister(ingenic_ipu_driver_ptr); |
| } |
| module_exit(ingenic_drm_exit); |
| |
| MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); |
| MODULE_DESCRIPTION("DRM driver for the Ingenic SoCs\n"); |
| MODULE_LICENSE("GPL v2"); |