drivers/rtc/rtc-zynqmp.c - linux - Git at Google

 /*
  * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
  *
  * Copyright (C) 2015 Xilinx, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program. If not, see <http://www.gnu.org/licenses/>.
  *
  */

 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>

 /* RTC Registers */
 #define RTC_SET_TM_WR		0x00
 #define RTC_SET_TM_RD		0x04
 #define RTC_CALIB_WR		0x08
 #define RTC_CALIB_RD		0x0C
 #define RTC_CUR_TM		0x10
 #define RTC_CUR_TICK		0x14
 #define RTC_ALRM		0x18
 #define RTC_INT_STS		0x20
 #define RTC_INT_MASK		0x24
 #define RTC_INT_EN		0x28
 #define RTC_INT_DIS		0x2C
 #define RTC_CTRL		0x40

 #define RTC_FR_EN		BIT(20)
 #define RTC_FR_DATSHIFT		16
 #define RTC_TICK_MASK		0xFFFF
 #define RTC_INT_SEC		BIT(0)
 #define RTC_INT_ALRM		BIT(1)
 #define RTC_OSC_EN		BIT(24)
 #define RTC_BATT_EN		BIT(31)

 #define RTC_CALIB_DEF		0x198233
 #define RTC_CALIB_MASK		0x1FFFFF
 #define RTC_SEC_MAX_VAL		0xFFFFFFFF

 struct xlnx_rtc_dev {
 	struct rtc_device	*rtc;
 	void __iomem		*reg_base;
 	int			alarm_irq;
 	int			sec_irq;
 	int			calibval;
 };

 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 	unsigned long new_time;

 	/*
 	 * The value written will be updated after 1 sec into the
 	 * seconds read register, so we need to program time +1 sec
 	 * to get the correct time on read.
 	 */
 	new_time = rtc_tm_to_time64(tm) + 1;

 	if (new_time > RTC_SEC_MAX_VAL)
 		return -EINVAL;

 	/*
 	 * Writing into calibration register will clear the Tick Counter and
 	 * force the next second to be signaled exactly in 1 second period
 	 */
 	xrtcdev->calibval &= RTC_CALIB_MASK;
 	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));

 	writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);

 	/*
 	 * Clear the rtc interrupt status register after setting the
 	 * time. During a read_time function, the code should read the
 	 * RTC_INT_STATUS register and if bit 0 is still 0, it means
 	 * that one second has not elapsed yet since RTC was set and
 	 * the current time should be read from SET_TIME_READ register;
 	 * otherwise, CURRENT_TIME register is read to report the time
 	 */
 	writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);

 	return 0;
 }

 static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	u32 status;
 	unsigned long read_time;
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

 	status = readl(xrtcdev->reg_base + RTC_INT_STS);

 	if (status & RTC_INT_SEC) {
 		/*
 		 * RTC has updated the CURRENT_TIME with the time written into
 		 * SET_TIME_WRITE register.
 		 */
 		rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
 	} else {
 		/*
 		 * Time written in SET_TIME_WRITE has not yet updated into
 		 * the seconds read register, so read the time from the
 		 * SET_TIME_WRITE instead of CURRENT_TIME register.
 		 * Since we add +1 sec while writing, we need to -1 sec while
 		 * reading.
 		 */
 		read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
 		rtc_time64_to_tm(read_time, tm);
 	}

 	return 0;
 }

 static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

 	rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
 	alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;

 	return 0;
 }

 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
 {
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

 	if (enabled)
 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
 	else
 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);

 	return 0;
 }

 static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 	unsigned long alarm_time;

 	alarm_time = rtc_tm_to_time64(&alrm->time);

 	if (alarm_time > RTC_SEC_MAX_VAL)
 		return -EINVAL;

 	writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));

 	xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);

 	return 0;
 }

 static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
 {
 	u32 rtc_ctrl;

 	/* Enable RTC switch to battery when VCC_PSAUX is not available */
 	rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
 	rtc_ctrl |= RTC_BATT_EN;
 	writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);

 	/*
 	 * Based on crystal freq of 33.330 KHz
 	 * set the seconds counter and enable, set fractions counter
 	 * to default value suggested as per design spec
 	 * to correct RTC delay in frequency over period of time.
 	 */
 	xrtcdev->calibval &= RTC_CALIB_MASK;
 	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
 }

 static const struct rtc_class_ops xlnx_rtc_ops = {
 	.set_time	  = xlnx_rtc_set_time,
 	.read_time	  = xlnx_rtc_read_time,
 	.read_alarm	  = xlnx_rtc_read_alarm,
 	.set_alarm	  = xlnx_rtc_set_alarm,
 	.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
 };

 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
 {
 	struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
 	unsigned int status;

 	status = readl(xrtcdev->reg_base + RTC_INT_STS);
 	/* Check if interrupt asserted */
 	if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
 		return IRQ_NONE;

 	/* Clear RTC_INT_ALRM interrupt only */
 	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);

 	if (status & RTC_INT_ALRM)
 		rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);

 	return IRQ_HANDLED;
 }

 static int xlnx_rtc_probe(struct platform_device *pdev)
 {
 	struct xlnx_rtc_dev *xrtcdev;
 	struct resource *res;
 	int ret;

 	xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
 	if (!xrtcdev)
 		return -ENOMEM;

 	platform_set_drvdata(pdev, xrtcdev);

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

 	xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(xrtcdev->reg_base))
 		return PTR_ERR(xrtcdev->reg_base);

 	xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
 	if (xrtcdev->alarm_irq < 0) {
 		dev_err(&pdev->dev, "no irq resource\n");
 		return xrtcdev->alarm_irq;
 	}
 	ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
 			       xlnx_rtc_interrupt, 0,
 			       dev_name(&pdev->dev), xrtcdev);
 	if (ret) {
 		dev_err(&pdev->dev, "request irq failed\n");
 		return ret;
 	}

 	xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
 	if (xrtcdev->sec_irq < 0) {
 		dev_err(&pdev->dev, "no irq resource\n");
 		return xrtcdev->sec_irq;
 	}
 	ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
 			       xlnx_rtc_interrupt, 0,
 			       dev_name(&pdev->dev), xrtcdev);
 	if (ret) {
 		dev_err(&pdev->dev, "request irq failed\n");
 		return ret;
 	}

 	ret = of_property_read_u32(pdev->dev.of_node, "calibration",
 				   &xrtcdev->calibval);
 	if (ret)
 		xrtcdev->calibval = RTC_CALIB_DEF;

 	xlnx_init_rtc(xrtcdev);

 	device_init_wakeup(&pdev->dev, 1);

 	xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
 					 &xlnx_rtc_ops, THIS_MODULE);
 	return PTR_ERR_OR_ZERO(xrtcdev->rtc);
 }

 static int xlnx_rtc_remove(struct platform_device *pdev)
 {
 	xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
 	device_init_wakeup(&pdev->dev, 0);

 	return 0;
 }

 static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);

 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(xrtcdev->alarm_irq);
 	else
 		xlnx_rtc_alarm_irq_enable(dev, 0);

 	return 0;
 }

 static int __maybe_unused xlnx_rtc_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);

 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(xrtcdev->alarm_irq);
 	else
 		xlnx_rtc_alarm_irq_enable(dev, 1);

 	return 0;
 }

 static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);

 static const struct of_device_id xlnx_rtc_of_match[] = {
 	{.compatible = "xlnx,zynqmp-rtc" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);

 static struct platform_driver xlnx_rtc_driver = {
 	.probe		= xlnx_rtc_probe,
 	.remove		= xlnx_rtc_remove,
 	.driver		= {
 		.name	= KBUILD_MODNAME,
 		.pm	= &xlnx_rtc_pm_ops,
 		.of_match_table	= xlnx_rtc_of_match,
 	},
 };

 module_platform_driver(xlnx_rtc_driver);

 MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
 MODULE_AUTHOR("Xilinx Inc.");
 MODULE_LICENSE("GPL v2");
	/*
	* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
	*
	* Copyright (C) 2015 Xilinx, Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program. If not, see <http://www.gnu.org/licenses/>.
	*
	*/

	#include <linux/delay.h>
	#include <linux/init.h>
	#include <linux/io.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/rtc.h>

	/* RTC Registers */
	#define RTC_SET_TM_WR 0x00
	#define RTC_SET_TM_RD 0x04
	#define RTC_CALIB_WR 0x08
	#define RTC_CALIB_RD 0x0C
	#define RTC_CUR_TM 0x10
	#define RTC_CUR_TICK 0x14
	#define RTC_ALRM 0x18
	#define RTC_INT_STS 0x20
	#define RTC_INT_MASK 0x24
	#define RTC_INT_EN 0x28
	#define RTC_INT_DIS 0x2C
	#define RTC_CTRL 0x40

	#define RTC_FR_EN BIT(20)
	#define RTC_FR_DATSHIFT 16
	#define RTC_TICK_MASK 0xFFFF
	#define RTC_INT_SEC BIT(0)
	#define RTC_INT_ALRM BIT(1)
	#define RTC_OSC_EN BIT(24)
	#define RTC_BATT_EN BIT(31)

	#define RTC_CALIB_DEF 0x198233
	#define RTC_CALIB_MASK 0x1FFFFF
	#define RTC_SEC_MAX_VAL 0xFFFFFFFF

	struct xlnx_rtc_dev {
	struct rtc_device *rtc;
	void __iomem *reg_base;
	int alarm_irq;
	int sec_irq;
	int calibval;
	};

	static int xlnx_rtc_set_time(struct device dev, struct rtc_time tm)
	{
	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
	unsigned long new_time;

	/*
	* The value written will be updated after 1 sec into the
	* seconds read register, so we need to program time +1 sec
	* to get the correct time on read.
	*/
	new_time = rtc_tm_to_time64(tm) + 1;

	if (new_time > RTC_SEC_MAX_VAL)
	return -EINVAL;

	/*
	* Writing into calibration register will clear the Tick Counter and
	* force the next second to be signaled exactly in 1 second period
	*/
	xrtcdev->calibval &= RTC_CALIB_MASK;
	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));

	writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);

	/*
	* Clear the rtc interrupt status register after setting the
	* time. During a read_time function, the code should read the
	* RTC_INT_STATUS register and if bit 0 is still 0, it means
	* that one second has not elapsed yet since RTC was set and
	* the current time should be read from SET_TIME_READ register;
	* otherwise, CURRENT_TIME register is read to report the time
	*/
	writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);

	return 0;
	}

	static int xlnx_rtc_read_time(struct device dev, struct rtc_time tm)
	{
	u32 status;
	unsigned long read_time;
	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

	status = readl(xrtcdev->reg_base + RTC_INT_STS);

	if (status & RTC_INT_SEC) {
	/*
	* RTC has updated the CURRENT_TIME with the time written into
	* SET_TIME_WRITE register.
	*/
	rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
	} else {
	/*
	* Time written in SET_TIME_WRITE has not yet updated into
	* the seconds read register, so read the time from the
	* SET_TIME_WRITE instead of CURRENT_TIME register.
	* Since we add +1 sec while writing, we need to -1 sec while
	* reading.
	*/
	read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
	rtc_time64_to_tm(read_time, tm);
	}

	return 0;
	}

	static int xlnx_rtc_read_alarm(struct device dev, struct rtc_wkalrm alrm)
	{
	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

	rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
	alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;

	return 0;
	}

	static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
	{
	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);

	if (enabled)
	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
	else
	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);

	return 0;
	}

	static int xlnx_rtc_set_alarm(struct device dev, struct rtc_wkalrm alrm)
	{
	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
	unsigned long alarm_time;

	alarm_time = rtc_tm_to_time64(&alrm->time);

	if (alarm_time > RTC_SEC_MAX_VAL)
	return -EINVAL;

	writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));

	xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);

	return 0;
	}

	static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
	{
	u32 rtc_ctrl;

	/* Enable RTC switch to battery when VCC_PSAUX is not available */
	rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
	rtc_ctrl \|= RTC_BATT_EN;
	writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);

	/*
	* Based on crystal freq of 33.330 KHz
	* set the seconds counter and enable, set fractions counter
	* to default value suggested as per design spec
	* to correct RTC delay in frequency over period of time.
	*/
	xrtcdev->calibval &= RTC_CALIB_MASK;
	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
	}

	static const struct rtc_class_ops xlnx_rtc_ops = {
	.set_time = xlnx_rtc_set_time,
	.read_time = xlnx_rtc_read_time,
	.read_alarm = xlnx_rtc_read_alarm,
	.set_alarm = xlnx_rtc_set_alarm,
	.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
	};

	static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
	{
	struct xlnx_rtc_dev xrtcdev = (struct xlnx_rtc_dev )id;
	unsigned int status;

	status = readl(xrtcdev->reg_base + RTC_INT_STS);
	/* Check if interrupt asserted */
	if (!(status & (RTC_INT_SEC \| RTC_INT_ALRM)))
	return IRQ_NONE;

	/* Clear RTC_INT_ALRM interrupt only */
	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);

	if (status & RTC_INT_ALRM)
	rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF \| RTC_AF);

	return IRQ_HANDLED;
	}

	static int xlnx_rtc_probe(struct platform_device *pdev)
	{
	struct xlnx_rtc_dev *xrtcdev;
	struct resource *res;
	int ret;

	xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
	if (!xrtcdev)
	return -ENOMEM;

	platform_set_drvdata(pdev, xrtcdev);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(xrtcdev->reg_base))
	return PTR_ERR(xrtcdev->reg_base);

	xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
	if (xrtcdev->alarm_irq < 0) {
	dev_err(&pdev->dev, "no irq resource\n");
	return xrtcdev->alarm_irq;
	}
	ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
	xlnx_rtc_interrupt, 0,
	dev_name(&pdev->dev), xrtcdev);
	if (ret) {
	dev_err(&pdev->dev, "request irq failed\n");
	return ret;
	}

	xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
	if (xrtcdev->sec_irq < 0) {
	dev_err(&pdev->dev, "no irq resource\n");
	return xrtcdev->sec_irq;
	}
	ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
	xlnx_rtc_interrupt, 0,
	dev_name(&pdev->dev), xrtcdev);
	if (ret) {
	dev_err(&pdev->dev, "request irq failed\n");
	return ret;
	}

	ret = of_property_read_u32(pdev->dev.of_node, "calibration",
	&xrtcdev->calibval);
	if (ret)
	xrtcdev->calibval = RTC_CALIB_DEF;

	xlnx_init_rtc(xrtcdev);

	device_init_wakeup(&pdev->dev, 1);

	xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
	&xlnx_rtc_ops, THIS_MODULE);
	return PTR_ERR_OR_ZERO(xrtcdev->rtc);
	}

	static int xlnx_rtc_remove(struct platform_device *pdev)
	{
	xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
	device_init_wakeup(&pdev->dev, 0);

	return 0;
	}

	static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);

	if (device_may_wakeup(&pdev->dev))
	enable_irq_wake(xrtcdev->alarm_irq);
	else
	xlnx_rtc_alarm_irq_enable(dev, 0);

	return 0;
	}

	static int __maybe_unused xlnx_rtc_resume(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);

	if (device_may_wakeup(&pdev->dev))
	disable_irq_wake(xrtcdev->alarm_irq);
	else
	xlnx_rtc_alarm_irq_enable(dev, 1);

	return 0;
	}

	static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);

	static const struct of_device_id xlnx_rtc_of_match[] = {
	{.compatible = "xlnx,zynqmp-rtc" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);

	static struct platform_driver xlnx_rtc_driver = {
	.probe = xlnx_rtc_probe,
	.remove = xlnx_rtc_remove,
	.driver = {
	.name = KBUILD_MODNAME,
	.pm = &xlnx_rtc_pm_ops,
	.of_match_table = xlnx_rtc_of_match,
	},
	};

	module_platform_driver(xlnx_rtc_driver);

	MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
	MODULE_AUTHOR("Xilinx Inc.");
	MODULE_LICENSE("GPL v2");