| /*============================================================================= |
| * |
| * A PCMCIA client driver for the Raylink wireless LAN card. |
| * The starting point for this module was the skeleton.c in the |
| * PCMCIA 2.9.12 package written by David Hinds, dahinds@users.sourceforge.net |
| * |
| * |
| * Copyright (c) 1998 Corey Thomas (corey@world.std.com) |
| * |
| * This driver is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 only of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * It is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA |
| * |
| * Changes: |
| * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000 |
| * - reorganize kmallocs in ray_attach, checking all for failure |
| * and releasing the previous allocations if one fails |
| * |
| * Daniele Bellucci <bellucda@tiscali.it> - 07/10/2003 |
| * - Audit copy_to_user in ioctl(SIOCGIWESSID) |
| * |
| =============================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/proc_fs.h> |
| #include <linux/ptrace.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/ioport.h> |
| #include <linux/skbuff.h> |
| #include <linux/ethtool.h> |
| #include <linux/ieee80211.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/mem_op.h> |
| |
| #include <linux/wireless.h> |
| #include <net/iw_handler.h> |
| |
| #include <asm/io.h> |
| #include <asm/system.h> |
| #include <asm/byteorder.h> |
| #include <asm/uaccess.h> |
| |
| /* Warning : these stuff will slow down the driver... */ |
| #define WIRELESS_SPY /* Enable spying addresses */ |
| /* Definitions we need for spy */ |
| typedef struct iw_statistics iw_stats; |
| typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */ |
| |
| #include "rayctl.h" |
| #include "ray_cs.h" |
| |
| /* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If |
| you do not define PCMCIA_DEBUG at all, all the debug code will be |
| left out. If you compile with PCMCIA_DEBUG=0, the debug code will |
| be present but disabled -- but it can then be enabled for specific |
| modules at load time with a 'pc_debug=#' option to insmod. |
| */ |
| |
| #ifdef RAYLINK_DEBUG |
| #define PCMCIA_DEBUG RAYLINK_DEBUG |
| #endif |
| #ifdef PCMCIA_DEBUG |
| static int ray_debug; |
| static int pc_debug = PCMCIA_DEBUG; |
| module_param(pc_debug, int, 0); |
| /* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */ |
| #define DEBUG(n, args...) if (pc_debug>(n)) printk(args); |
| #else |
| #define DEBUG(n, args...) |
| #endif |
| /** Prototypes based on PCMCIA skeleton driver *******************************/ |
| static int ray_config(struct pcmcia_device *link); |
| static void ray_release(struct pcmcia_device *link); |
| static void ray_detach(struct pcmcia_device *p_dev); |
| |
| /***** Prototypes indicated by device structure ******************************/ |
| static int ray_dev_close(struct net_device *dev); |
| static int ray_dev_config(struct net_device *dev, struct ifmap *map); |
| static struct net_device_stats *ray_get_stats(struct net_device *dev); |
| static int ray_dev_init(struct net_device *dev); |
| |
| static const struct ethtool_ops netdev_ethtool_ops; |
| |
| static int ray_open(struct net_device *dev); |
| static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| static void set_multicast_list(struct net_device *dev); |
| static void ray_update_multi_list(struct net_device *dev, int all); |
| static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, |
| unsigned char *data, int len); |
| static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type, |
| unsigned char *data); |
| static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len); |
| static iw_stats * ray_get_wireless_stats(struct net_device * dev); |
| static const struct iw_handler_def ray_handler_def; |
| |
| /***** Prototypes for raylink functions **************************************/ |
| static int asc_to_int(char a); |
| static void authenticate(ray_dev_t *local); |
| static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type); |
| static void authenticate_timeout(u_long); |
| static int get_free_ccs(ray_dev_t *local); |
| static int get_free_tx_ccs(ray_dev_t *local); |
| static void init_startup_params(ray_dev_t *local); |
| static int parse_addr(char *in_str, UCHAR *out); |
| static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev, UCHAR type); |
| static int ray_init(struct net_device *dev); |
| static int interrupt_ecf(ray_dev_t *local, int ccs); |
| static void ray_reset(struct net_device *dev); |
| static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len); |
| static void verify_dl_startup(u_long); |
| |
| /* Prototypes for interrpt time functions **********************************/ |
| static irqreturn_t ray_interrupt (int reg, void *dev_id); |
| static void clear_interrupt(ray_dev_t *local); |
| static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs, |
| unsigned int pkt_addr, int rx_len); |
| static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int len); |
| static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs); |
| static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs); |
| static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs, |
| unsigned int pkt_addr, int rx_len); |
| static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr, |
| int rx_len); |
| static void associate(ray_dev_t *local); |
| |
| /* Card command functions */ |
| static int dl_startup_params(struct net_device *dev); |
| static void join_net(u_long local); |
| static void start_net(u_long local); |
| /* void start_net(ray_dev_t *local); */ |
| |
| /*===========================================================================*/ |
| /* Parameters that can be set with 'insmod' */ |
| |
| /* ADHOC=0, Infrastructure=1 */ |
| static int net_type = ADHOC; |
| |
| /* Hop dwell time in Kus (1024 us units defined by 802.11) */ |
| static int hop_dwell = 128; |
| |
| /* Beacon period in Kus */ |
| static int beacon_period = 256; |
| |
| /* power save mode (0 = off, 1 = save power) */ |
| static int psm; |
| |
| /* String for network's Extended Service Set ID. 32 Characters max */ |
| static char *essid; |
| |
| /* Default to encapsulation unless translation requested */ |
| static int translate = 1; |
| |
| static int country = USA; |
| |
| static int sniffer; |
| |
| static int bc; |
| |
| /* 48 bit physical card address if overriding card's real physical |
| * address is required. Since IEEE 802.11 addresses are 48 bits |
| * like ethernet, an int can't be used, so a string is used. To |
| * allow use of addresses starting with a decimal digit, the first |
| * character must be a letter and will be ignored. This letter is |
| * followed by up to 12 hex digits which are the address. If less |
| * than 12 digits are used, the address will be left filled with 0's. |
| * Note that bit 0 of the first byte is the broadcast bit, and evil |
| * things will happen if it is not 0 in a card address. |
| */ |
| static char *phy_addr = NULL; |
| |
| |
| /* A struct pcmcia_device structure has fields for most things that are needed |
| to keep track of a socket, but there will usually be some device |
| specific information that also needs to be kept track of. The |
| 'priv' pointer in a struct pcmcia_device structure can be used to point to |
| a device-specific private data structure, like this. |
| */ |
| static unsigned int ray_mem_speed = 500; |
| |
| /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ |
| static struct pcmcia_device *this_device = NULL; |
| |
| MODULE_AUTHOR("Corey Thomas <corey@world.std.com>"); |
| MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(net_type, int, 0); |
| module_param(hop_dwell, int, 0); |
| module_param(beacon_period, int, 0); |
| module_param(psm, int, 0); |
| module_param(essid, charp, 0); |
| module_param(translate, int, 0); |
| module_param(country, int, 0); |
| module_param(sniffer, int, 0); |
| module_param(bc, int, 0); |
| module_param(phy_addr, charp, 0); |
| module_param(ray_mem_speed, int, 0); |
| |
| static UCHAR b5_default_startup_parms[] = { |
| 0, 0, /* Adhoc station */ |
| 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */ |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 1, 0, /* Active scan, CA Mode */ |
| 0, 0, 0, 0, 0, 0, /* No default MAC addr */ |
| 0x7f, 0xff, /* Frag threshold */ |
| 0x00, 0x80, /* Hop time 128 Kus*/ |
| 0x01, 0x00, /* Beacon period 256 Kus */ |
| 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/ |
| 0x1d, 0x82, 0x4e, /* SIFS, DIFS, PIFS */ |
| 0x7f, 0xff, /* RTS threshold */ |
| 0x04, 0xe2, 0x38, 0xA4, /* scan_dwell, max_scan_dwell */ |
| 0x05, /* assoc resp timeout thresh */ |
| 0x08, 0x02, 0x08, /* adhoc, infra, super cycle max*/ |
| 0, /* Promiscuous mode */ |
| 0x0c, 0x0bd, /* Unique word */ |
| 0x32, /* Slot time */ |
| 0xff, 0xff, /* roam-low snr, low snr count */ |
| 0x05, 0xff, /* Infra, adhoc missed bcn thresh */ |
| 0x01, 0x0b, 0x4f, /* USA, hop pattern, hop pat length */ |
| /* b4 - b5 differences start here */ |
| 0x00, 0x3f, /* CW max */ |
| 0x00, 0x0f, /* CW min */ |
| 0x04, 0x08, /* Noise gain, limit offset */ |
| 0x28, 0x28, /* det rssi, med busy offsets */ |
| 7, /* det sync thresh */ |
| 0, 2, 2, /* test mode, min, max */ |
| 0, /* allow broadcast SSID probe resp */ |
| 0, 0, /* privacy must start, can join */ |
| 2, 0, 0, 0, 0, 0, 0, 0 /* basic rate set */ |
| }; |
| |
| static UCHAR b4_default_startup_parms[] = { |
| 0, 0, /* Adhoc station */ |
| 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */ |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 1, 0, /* Active scan, CA Mode */ |
| 0, 0, 0, 0, 0, 0, /* No default MAC addr */ |
| 0x7f, 0xff, /* Frag threshold */ |
| 0x02, 0x00, /* Hop time */ |
| 0x00, 0x01, /* Beacon period */ |
| 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/ |
| 0x1d, 0x82, 0xce, /* SIFS, DIFS, PIFS */ |
| 0x7f, 0xff, /* RTS threshold */ |
| 0xfb, 0x1e, 0xc7, 0x5c, /* scan_dwell, max_scan_dwell */ |
| 0x05, /* assoc resp timeout thresh */ |
| 0x04, 0x02, 0x4, /* adhoc, infra, super cycle max*/ |
| 0, /* Promiscuous mode */ |
| 0x0c, 0x0bd, /* Unique word */ |
| 0x4e, /* Slot time (TBD seems wrong)*/ |
| 0xff, 0xff, /* roam-low snr, low snr count */ |
| 0x05, 0xff, /* Infra, adhoc missed bcn thresh */ |
| 0x01, 0x0b, 0x4e, /* USA, hop pattern, hop pat length */ |
| /* b4 - b5 differences start here */ |
| 0x3f, 0x0f, /* CW max, min */ |
| 0x04, 0x08, /* Noise gain, limit offset */ |
| 0x28, 0x28, /* det rssi, med busy offsets */ |
| 7, /* det sync thresh */ |
| 0, 2, 2 /* test mode, min, max*/ |
| }; |
| /*===========================================================================*/ |
| static unsigned char eth2_llc[] = {0xaa, 0xaa, 3, 0, 0, 0}; |
| |
| static char hop_pattern_length[] = { 1, |
| USA_HOP_MOD, EUROPE_HOP_MOD, |
| JAPAN_HOP_MOD, KOREA_HOP_MOD, |
| SPAIN_HOP_MOD, FRANCE_HOP_MOD, |
| ISRAEL_HOP_MOD, AUSTRALIA_HOP_MOD, |
| JAPAN_TEST_HOP_MOD |
| }; |
| |
| static char rcsid[] = "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.std.com>"; |
| |
| /*============================================================================= |
| ray_attach() creates an "instance" of the driver, allocating |
| local data structures for one device. The device is registered |
| with Card Services. |
| The dev_link structure is initialized, but we don't actually |
| configure the card at this point -- we wait until we receive a |
| card insertion event. |
| =============================================================================*/ |
| static int ray_probe(struct pcmcia_device *p_dev) |
| { |
| ray_dev_t *local; |
| struct net_device *dev; |
| |
| DEBUG(1, "ray_attach()\n"); |
| |
| /* Allocate space for private device-specific data */ |
| dev = alloc_etherdev(sizeof(ray_dev_t)); |
| if (!dev) |
| goto fail_alloc_dev; |
| |
| local = netdev_priv(dev); |
| local->finder = p_dev; |
| |
| /* The io structure describes IO port mapping. None used here */ |
| p_dev->io.NumPorts1 = 0; |
| p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; |
| p_dev->io.IOAddrLines = 5; |
| |
| /* Interrupt setup. For PCMCIA, driver takes what's given */ |
| p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; |
| p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| p_dev->irq.Handler = &ray_interrupt; |
| |
| /* General socket configuration */ |
| p_dev->conf.Attributes = CONF_ENABLE_IRQ; |
| p_dev->conf.IntType = INT_MEMORY_AND_IO; |
| p_dev->conf.ConfigIndex = 1; |
| |
| p_dev->priv = dev; |
| p_dev->irq.Instance = dev; |
| |
| local->finder = p_dev; |
| local->card_status = CARD_INSERTED; |
| local->authentication_state = UNAUTHENTICATED; |
| local->num_multi = 0; |
| DEBUG(2,"ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n", |
| p_dev,dev,local,&ray_interrupt); |
| |
| /* Raylink entries in the device structure */ |
| dev->hard_start_xmit = &ray_dev_start_xmit; |
| dev->set_config = &ray_dev_config; |
| dev->get_stats = &ray_get_stats; |
| SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); |
| dev->wireless_handlers = &ray_handler_def; |
| #ifdef WIRELESS_SPY |
| local->wireless_data.spy_data = &local->spy_data; |
| dev->wireless_data = &local->wireless_data; |
| #endif /* WIRELESS_SPY */ |
| |
| dev->set_multicast_list = &set_multicast_list; |
| |
| DEBUG(2,"ray_cs ray_attach calling ether_setup.)\n"); |
| dev->init = &ray_dev_init; |
| dev->open = &ray_open; |
| dev->stop = &ray_dev_close; |
| netif_stop_queue(dev); |
| |
| init_timer(&local->timer); |
| |
| this_device = p_dev; |
| return ray_config(p_dev); |
| |
| fail_alloc_dev: |
| return -ENOMEM; |
| } /* ray_attach */ |
| /*============================================================================= |
| This deletes a driver "instance". The device is de-registered |
| with Card Services. If it has been released, all local data |
| structures are freed. Otherwise, the structures will be freed |
| when the device is released. |
| =============================================================================*/ |
| static void ray_detach(struct pcmcia_device *link) |
| { |
| struct net_device *dev; |
| ray_dev_t *local; |
| |
| DEBUG(1, "ray_detach(0x%p)\n", link); |
| |
| this_device = NULL; |
| dev = link->priv; |
| |
| ray_release(link); |
| |
| local = netdev_priv(dev); |
| del_timer(&local->timer); |
| |
| if (link->priv) { |
| if (link->dev_node) unregister_netdev(dev); |
| free_netdev(dev); |
| } |
| DEBUG(2,"ray_cs ray_detach ending\n"); |
| } /* ray_detach */ |
| /*============================================================================= |
| ray_config() is run after a CARD_INSERTION event |
| is received, to configure the PCMCIA socket, and to make the |
| ethernet device available to the system. |
| =============================================================================*/ |
| #define CS_CHECK(fn, ret) \ |
| do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) |
| #define MAX_TUPLE_SIZE 128 |
| static int ray_config(struct pcmcia_device *link) |
| { |
| int last_fn = 0, last_ret = 0; |
| int i; |
| win_req_t req; |
| memreq_t mem; |
| struct net_device *dev = (struct net_device *)link->priv; |
| ray_dev_t *local = netdev_priv(dev); |
| |
| DEBUG(1, "ray_config(0x%p)\n", link); |
| |
| /* Determine card type and firmware version */ |
| printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n", |
| link->prod_id[0] ? link->prod_id[0] : " ", |
| link->prod_id[1] ? link->prod_id[1] : " ", |
| link->prod_id[2] ? link->prod_id[2] : " ", |
| link->prod_id[3] ? link->prod_id[3] : " "); |
| |
| /* Now allocate an interrupt line. Note that this does not |
| actually assign a handler to the interrupt. |
| */ |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
| dev->irq = link->irq.AssignedIRQ; |
| |
| /* This actually configures the PCMCIA socket -- setting up |
| the I/O windows and the interrupt mapping. |
| */ |
| CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
| |
| /*** Set up 32k window for shared memory (transmit and control) ************/ |
| req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; |
| req.Base = 0; |
| req.Size = 0x8000; |
| req.AccessSpeed = ray_mem_speed; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win)); |
| mem.CardOffset = 0x0000; mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); |
| local->sram = ioremap(req.Base,req.Size); |
| |
| /*** Set up 16k window for shared memory (receive buffer) ***************/ |
| req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; |
| req.Base = 0; |
| req.Size = 0x4000; |
| req.AccessSpeed = ray_mem_speed; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &local->rmem_handle)); |
| mem.CardOffset = 0x8000; mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem)); |
| local->rmem = ioremap(req.Base,req.Size); |
| |
| /*** Set up window for attribute memory ***********************************/ |
| req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; |
| req.Base = 0; |
| req.Size = 0x1000; |
| req.AccessSpeed = ray_mem_speed; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &local->amem_handle)); |
| mem.CardOffset = 0x0000; mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem)); |
| local->amem = ioremap(req.Base,req.Size); |
| |
| DEBUG(3,"ray_config sram=%p\n",local->sram); |
| DEBUG(3,"ray_config rmem=%p\n",local->rmem); |
| DEBUG(3,"ray_config amem=%p\n",local->amem); |
| if (ray_init(dev) < 0) { |
| ray_release(link); |
| return -ENODEV; |
| } |
| |
| SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
| i = register_netdev(dev); |
| if (i != 0) { |
| printk("ray_config register_netdev() failed\n"); |
| ray_release(link); |
| return i; |
| } |
| |
| strcpy(local->node.dev_name, dev->name); |
| link->dev_node = &local->node; |
| |
| printk(KERN_INFO "%s: RayLink, irq %d, hw_addr %pM\n", |
| dev->name, dev->irq, dev->dev_addr); |
| |
| return 0; |
| |
| cs_failed: |
| cs_error(link, last_fn, last_ret); |
| |
| ray_release(link); |
| return -ENODEV; |
| } /* ray_config */ |
| |
| static inline struct ccs __iomem *ccs_base(ray_dev_t *dev) |
| { |
| return dev->sram + CCS_BASE; |
| } |
| |
| static inline struct rcs __iomem *rcs_base(ray_dev_t *dev) |
| { |
| /* |
| * This looks nonsensical, since there is a separate |
| * RCS_BASE. But the difference between a "struct rcs" |
| * and a "struct ccs" ends up being in the _index_ off |
| * the base, so the base pointer is the same for both |
| * ccs/rcs. |
| */ |
| return dev->sram + CCS_BASE; |
| } |
| |
| /*===========================================================================*/ |
| static int ray_init(struct net_device *dev) |
| { |
| int i; |
| UCHAR *p; |
| struct ccs __iomem *pccs; |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| DEBUG(1, "ray_init(0x%p)\n", dev); |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(0,"ray_init - device not present\n"); |
| return -1; |
| } |
| |
| local->net_type = net_type; |
| local->sta_type = TYPE_STA; |
| |
| /* Copy the startup results to local memory */ |
| memcpy_fromio(&local->startup_res, local->sram + ECF_TO_HOST_BASE,\ |
| sizeof(struct startup_res_6)); |
| |
| /* Check Power up test status and get mac address from card */ |
| if (local->startup_res.startup_word != 0x80) { |
| printk(KERN_INFO "ray_init ERROR card status = %2x\n", |
| local->startup_res.startup_word); |
| local->card_status = CARD_INIT_ERROR; |
| return -1; |
| } |
| |
| local->fw_ver = local->startup_res.firmware_version[0]; |
| local->fw_bld = local->startup_res.firmware_version[1]; |
| local->fw_var = local->startup_res.firmware_version[2]; |
| DEBUG(1,"ray_init firmware version %d.%d \n",local->fw_ver, local->fw_bld); |
| |
| local->tib_length = 0x20; |
| if ((local->fw_ver == 5) && (local->fw_bld >= 30)) |
| local->tib_length = local->startup_res.tib_length; |
| DEBUG(2,"ray_init tib_length = 0x%02x\n", local->tib_length); |
| /* Initialize CCS's to buffer free state */ |
| pccs = ccs_base(local); |
| for (i=0; i<NUMBER_OF_CCS; i++) { |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| } |
| init_startup_params(local); |
| |
| /* copy mac address to startup parameters */ |
| if (parse_addr(phy_addr, local->sparm.b4.a_mac_addr)) |
| { |
| p = local->sparm.b4.a_mac_addr; |
| } |
| else |
| { |
| memcpy(&local->sparm.b4.a_mac_addr, |
| &local->startup_res.station_addr, ADDRLEN); |
| p = local->sparm.b4.a_mac_addr; |
| } |
| |
| clear_interrupt(local); /* Clear any interrupt from the card */ |
| local->card_status = CARD_AWAITING_PARAM; |
| DEBUG(2,"ray_init ending\n"); |
| return 0; |
| } /* ray_init */ |
| /*===========================================================================*/ |
| /* Download startup parameters to the card and command it to read them */ |
| static int dl_startup_params(struct net_device *dev) |
| { |
| int ccsindex; |
| ray_dev_t *local = netdev_priv(dev); |
| struct ccs __iomem *pccs; |
| struct pcmcia_device *link = local->finder; |
| |
| DEBUG(1,"dl_startup_params entered\n"); |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs dl_startup_params - device not present\n"); |
| return -1; |
| } |
| |
| /* Copy parameters to host to ECF area */ |
| if (local->fw_ver == 0x55) |
| memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b4, |
| sizeof(struct b4_startup_params)); |
| else |
| memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b5, |
| sizeof(struct b5_startup_params)); |
| |
| |
| /* Fill in the CCS fields for the ECF */ |
| if ((ccsindex = get_free_ccs(local)) < 0) return -1; |
| local->dl_param_ccs = ccsindex; |
| pccs = ccs_base(local) + ccsindex; |
| writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd); |
| DEBUG(2,"dl_startup_params start ccsindex = %d\n", local->dl_param_ccs); |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| printk(KERN_INFO "ray dl_startup_params failed - " |
| "ECF not ready for intr\n"); |
| local->card_status = CARD_DL_PARAM_ERROR; |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| return -2; |
| } |
| local->card_status = CARD_DL_PARAM; |
| /* Start kernel timer to wait for dl startup to complete. */ |
| local->timer.expires = jiffies + HZ/2; |
| local->timer.data = (long)local; |
| local->timer.function = &verify_dl_startup; |
| add_timer(&local->timer); |
| DEBUG(2,"ray_cs dl_startup_params started timer for verify_dl_startup\n"); |
| return 0; |
| } /* dl_startup_params */ |
| /*===========================================================================*/ |
| static void init_startup_params(ray_dev_t *local) |
| { |
| int i; |
| |
| if (country > JAPAN_TEST) country = USA; |
| else |
| if (country < USA) country = USA; |
| /* structure for hop time and beacon period is defined here using |
| * New 802.11D6.1 format. Card firmware is still using old format |
| * until version 6. |
| * Before After |
| * a_hop_time ms byte a_hop_time ms byte |
| * a_hop_time 2s byte a_hop_time ls byte |
| * a_hop_time ls byte a_beacon_period ms byte |
| * a_beacon_period a_beacon_period ls byte |
| * |
| * a_hop_time = uS a_hop_time = KuS |
| * a_beacon_period = hops a_beacon_period = KuS |
| */ /* 64ms = 010000 */ |
| if (local->fw_ver == 0x55) { |
| memcpy((UCHAR *)&local->sparm.b4, b4_default_startup_parms, |
| sizeof(struct b4_startup_params)); |
| /* Translate sane kus input values to old build 4/5 format */ |
| /* i = hop time in uS truncated to 3 bytes */ |
| i = (hop_dwell * 1024) & 0xffffff; |
| local->sparm.b4.a_hop_time[0] = (i >> 16) & 0xff; |
| local->sparm.b4.a_hop_time[1] = (i >> 8) & 0xff; |
| local->sparm.b4.a_beacon_period[0] = 0; |
| local->sparm.b4.a_beacon_period[1] = |
| ((beacon_period/hop_dwell) - 1) & 0xff; |
| local->sparm.b4.a_curr_country_code = country; |
| local->sparm.b4.a_hop_pattern_length = |
| hop_pattern_length[(int)country] - 1; |
| if (bc) |
| { |
| local->sparm.b4.a_ack_timeout = 0x50; |
| local->sparm.b4.a_sifs = 0x3f; |
| } |
| } |
| else { /* Version 5 uses real kus values */ |
| memcpy((UCHAR *)&local->sparm.b5, b5_default_startup_parms, |
| sizeof(struct b5_startup_params)); |
| |
| local->sparm.b5.a_hop_time[0] = (hop_dwell >> 8) & 0xff; |
| local->sparm.b5.a_hop_time[1] = hop_dwell & 0xff; |
| local->sparm.b5.a_beacon_period[0] = (beacon_period >> 8) & 0xff; |
| local->sparm.b5.a_beacon_period[1] = beacon_period & 0xff; |
| if (psm) |
| local->sparm.b5.a_power_mgt_state = 1; |
| local->sparm.b5.a_curr_country_code = country; |
| local->sparm.b5.a_hop_pattern_length = |
| hop_pattern_length[(int)country]; |
| } |
| |
| local->sparm.b4.a_network_type = net_type & 0x01; |
| local->sparm.b4.a_acting_as_ap_status = TYPE_STA; |
| |
| if (essid != NULL) |
| strncpy(local->sparm.b4.a_current_ess_id, essid, ESSID_SIZE); |
| } /* init_startup_params */ |
| /*===========================================================================*/ |
| static void verify_dl_startup(u_long data) |
| { |
| ray_dev_t *local = (ray_dev_t *)data; |
| struct ccs __iomem *pccs = ccs_base(local) + local->dl_param_ccs; |
| UCHAR status; |
| struct pcmcia_device *link = local->finder; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs verify_dl_startup - device not present\n"); |
| return; |
| } |
| #ifdef PCMCIA_DEBUG |
| if (pc_debug > 2) { |
| int i; |
| printk(KERN_DEBUG "verify_dl_startup parameters sent via ccs %d:\n", |
| local->dl_param_ccs); |
| for (i=0; i<sizeof(struct b5_startup_params); i++) { |
| printk(" %2x", (unsigned int) readb(local->sram + HOST_TO_ECF_BASE + i)); |
| } |
| printk("\n"); |
| } |
| #endif |
| |
| status = readb(&pccs->buffer_status); |
| if (status!= CCS_BUFFER_FREE) |
| { |
| printk(KERN_INFO "Download startup params failed. Status = %d\n", |
| status); |
| local->card_status = CARD_DL_PARAM_ERROR; |
| return; |
| } |
| if (local->sparm.b4.a_network_type == ADHOC) |
| start_net((u_long)local); |
| else |
| join_net((u_long)local); |
| |
| return; |
| } /* end verify_dl_startup */ |
| /*===========================================================================*/ |
| /* Command card to start a network */ |
| static void start_net(u_long data) |
| { |
| ray_dev_t *local = (ray_dev_t *)data; |
| struct ccs __iomem *pccs; |
| int ccsindex; |
| struct pcmcia_device *link = local->finder; |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs start_net - device not present\n"); |
| return; |
| } |
| /* Fill in the CCS fields for the ECF */ |
| if ((ccsindex = get_free_ccs(local)) < 0) return; |
| pccs = ccs_base(local) + ccsindex; |
| writeb(CCS_START_NETWORK, &pccs->cmd); |
| writeb(0, &pccs->var.start_network.update_param); |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(1,"ray start net failed - card not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| return; |
| } |
| local->card_status = CARD_DOING_ACQ; |
| return; |
| } /* end start_net */ |
| /*===========================================================================*/ |
| /* Command card to join a network */ |
| static void join_net(u_long data) |
| { |
| ray_dev_t *local = (ray_dev_t *)data; |
| |
| struct ccs __iomem *pccs; |
| int ccsindex; |
| struct pcmcia_device *link = local->finder; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs join_net - device not present\n"); |
| return; |
| } |
| /* Fill in the CCS fields for the ECF */ |
| if ((ccsindex = get_free_ccs(local)) < 0) return; |
| pccs = ccs_base(local) + ccsindex; |
| writeb(CCS_JOIN_NETWORK, &pccs->cmd); |
| writeb(0, &pccs->var.join_network.update_param); |
| writeb(0, &pccs->var.join_network.net_initiated); |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(1,"ray join net failed - card not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| return; |
| } |
| local->card_status = CARD_DOING_ACQ; |
| return; |
| } |
| /*============================================================================ |
| After a card is removed, ray_release() will unregister the net |
| device, and release the PCMCIA configuration. If the device is |
| still open, this will be postponed until it is closed. |
| =============================================================================*/ |
| static void ray_release(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| ray_dev_t *local = netdev_priv(dev); |
| int i; |
| |
| DEBUG(1, "ray_release(0x%p)\n", link); |
| |
| del_timer(&local->timer); |
| |
| iounmap(local->sram); |
| iounmap(local->rmem); |
| iounmap(local->amem); |
| /* Do bother checking to see if these succeed or not */ |
| i = pcmcia_release_window(local->amem_handle); |
| if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i); |
| i = pcmcia_release_window(local->rmem_handle); |
| if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i); |
| pcmcia_disable_device(link); |
| |
| DEBUG(2,"ray_release ending\n"); |
| } |
| |
| static int ray_suspend(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| return 0; |
| } |
| |
| static int ray_resume(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) { |
| ray_reset(dev); |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| /*===========================================================================*/ |
| int ray_dev_init(struct net_device *dev) |
| { |
| #ifdef RAY_IMMEDIATE_INIT |
| int i; |
| #endif /* RAY_IMMEDIATE_INIT */ |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| |
| DEBUG(1,"ray_dev_init(dev=%p)\n",dev); |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_dev_init - device not present\n"); |
| return -1; |
| } |
| #ifdef RAY_IMMEDIATE_INIT |
| /* Download startup parameters */ |
| if ( (i = dl_startup_params(dev)) < 0) |
| { |
| printk(KERN_INFO "ray_dev_init dl_startup_params failed - " |
| "returns 0x%x\n",i); |
| return -1; |
| } |
| #else /* RAY_IMMEDIATE_INIT */ |
| /* Postpone the card init so that we can still configure the card, |
| * for example using the Wireless Extensions. The init will happen |
| * in ray_open() - Jean II */ |
| DEBUG(1,"ray_dev_init: postponing card init to ray_open() ; Status = %d\n", |
| local->card_status); |
| #endif /* RAY_IMMEDIATE_INIT */ |
| |
| /* copy mac and broadcast addresses to linux device */ |
| memcpy(&dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN); |
| memset(dev->broadcast, 0xff, ETH_ALEN); |
| |
| DEBUG(2,"ray_dev_init ending\n"); |
| return 0; |
| } |
| /*===========================================================================*/ |
| static int ray_dev_config(struct net_device *dev, struct ifmap *map) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| /* Dummy routine to satisfy device structure */ |
| DEBUG(1,"ray_dev_config(dev=%p,ifmap=%p)\n",dev,map); |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_dev_config - device not present\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| /*===========================================================================*/ |
| static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| short length = skb->len; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_dev_start_xmit - device not present\n"); |
| return -1; |
| } |
| DEBUG(3,"ray_dev_start_xmit(skb=%p, dev=%p)\n",skb,dev); |
| if (local->authentication_state == NEED_TO_AUTH) { |
| DEBUG(0,"ray_cs Sending authentication request.\n"); |
| if (!build_auth_frame (local, local->auth_id, OPEN_AUTH_REQUEST)) { |
| local->authentication_state = AUTHENTICATED; |
| netif_stop_queue(dev); |
| return 1; |
| } |
| } |
| |
| if (length < ETH_ZLEN) |
| { |
| if (skb_padto(skb, ETH_ZLEN)) |
| return 0; |
| length = ETH_ZLEN; |
| } |
| switch (ray_hw_xmit( skb->data, length, dev, DATA_TYPE)) { |
| case XMIT_NO_CCS: |
| case XMIT_NEED_AUTH: |
| netif_stop_queue(dev); |
| return 1; |
| case XMIT_NO_INTR: |
| case XMIT_MSG_BAD: |
| case XMIT_OK: |
| default: |
| dev->trans_start = jiffies; |
| dev_kfree_skb(skb); |
| return 0; |
| } |
| return 0; |
| } /* ray_dev_start_xmit */ |
| /*===========================================================================*/ |
| static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev, |
| UCHAR msg_type) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct ccs __iomem *pccs; |
| int ccsindex; |
| int offset; |
| struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */ |
| short int addr; /* Address of xmit buffer in card space */ |
| |
| DEBUG(3,"ray_hw_xmit(data=%p, len=%d, dev=%p)\n",data,len,dev); |
| if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) |
| { |
| printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",len); |
| return XMIT_MSG_BAD; |
| } |
| switch (ccsindex = get_free_tx_ccs(local)) { |
| case ECCSBUSY: |
| DEBUG(2,"ray_hw_xmit tx_ccs table busy\n"); |
| case ECCSFULL: |
| DEBUG(2,"ray_hw_xmit No free tx ccs\n"); |
| case ECARDGONE: |
| netif_stop_queue(dev); |
| return XMIT_NO_CCS; |
| default: |
| break; |
| } |
| addr = TX_BUF_BASE + (ccsindex << 11); |
| |
| if (msg_type == DATA_TYPE) { |
| local->stats.tx_bytes += len; |
| local->stats.tx_packets++; |
| } |
| |
| ptx = local->sram + addr; |
| |
| ray_build_header(local, ptx, msg_type, data); |
| if (translate) { |
| offset = translate_frame(local, ptx, data, len); |
| } |
| else { /* Encapsulate frame */ |
| /* TBD TIB length will move address of ptx->var */ |
| memcpy_toio(&ptx->var, data, len); |
| offset = 0; |
| } |
| |
| /* fill in the CCS */ |
| pccs = ccs_base(local) + ccsindex; |
| len += TX_HEADER_LENGTH + offset; |
| writeb(CCS_TX_REQUEST, &pccs->cmd); |
| writeb(addr >> 8, &pccs->var.tx_request.tx_data_ptr[0]); |
| writeb(local->tib_length, &pccs->var.tx_request.tx_data_ptr[1]); |
| writeb(len >> 8, &pccs->var.tx_request.tx_data_length[0]); |
| writeb(len & 0xff, &pccs->var.tx_request.tx_data_length[1]); |
| /* TBD still need psm_cam? */ |
| writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode); |
| writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate); |
| writeb(0, &pccs->var.tx_request.antenna); |
| DEBUG(3,"ray_hw_xmit default_tx_rate = 0x%x\n",\ |
| local->net_default_tx_rate); |
| |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(2,"ray_hw_xmit failed - ECF not ready for intr\n"); |
| /* TBD very inefficient to copy packet to buffer, and then not |
| send it, but the alternative is to queue the messages and that |
| won't be done for a while. Maybe set tbusy until a CCS is free? |
| */ |
| writeb(CCS_BUFFER_FREE, &pccs->buffer_status); |
| return XMIT_NO_INTR; |
| } |
| return XMIT_OK; |
| } /* end ray_hw_xmit */ |
| /*===========================================================================*/ |
| static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, unsigned char *data, |
| int len) |
| { |
| __be16 proto = ((struct ethhdr *)data)->h_proto; |
| if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */ |
| DEBUG(3,"ray_cs translate_frame DIX II\n"); |
| /* Copy LLC header to card buffer */ |
| memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc)); |
| memcpy_toio( ((void __iomem *)&ptx->var) + sizeof(eth2_llc), (UCHAR *)&proto, 2); |
| if (proto == htons(ETH_P_AARP) || proto == htons(ETH_P_IPX)) { |
| /* This is the selective translation table, only 2 entries */ |
| writeb(0xf8, &((struct snaphdr_t __iomem *)ptx->var)->org[3]); |
| } |
| /* Copy body of ethernet packet without ethernet header */ |
| memcpy_toio((void __iomem *)&ptx->var + sizeof(struct snaphdr_t), \ |
| data + ETH_HLEN, len - ETH_HLEN); |
| return (int) sizeof(struct snaphdr_t) - ETH_HLEN; |
| } |
| else { /* already 802 type, and proto is length */ |
| DEBUG(3,"ray_cs translate_frame 802\n"); |
| if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */ |
| DEBUG(3,"ray_cs translate_frame evil IPX\n"); |
| memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN); |
| return 0 - ETH_HLEN; |
| } |
| memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN); |
| return 0 - ETH_HLEN; |
| } |
| /* TBD do other frame types */ |
| } /* end translate_frame */ |
| /*===========================================================================*/ |
| static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type, |
| unsigned char *data) |
| { |
| writeb(PROTOCOL_VER | msg_type, &ptx->mac.frame_ctl_1); |
| /*** IEEE 802.11 Address field assignments ************* |
| TODS FROMDS addr_1 addr_2 addr_3 addr_4 |
| Adhoc 0 0 dest src (terminal) BSSID N/A |
| AP to Terminal 0 1 dest AP(BSSID) source N/A |
| Terminal to AP 1 0 AP(BSSID) src (terminal) dest N/A |
| AP to AP 1 1 dest AP src AP dest source |
| *******************************************************/ |
| if (local->net_type == ADHOC) { |
| writeb(0, &ptx->mac.frame_ctl_2); |
| memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, 2 * ADDRLEN); |
| memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN); |
| } |
| else /* infrastructure */ |
| { |
| if (local->sparm.b4.a_acting_as_ap_status) |
| { |
| writeb(FC2_FROM_DS, &ptx->mac.frame_ctl_2); |
| memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, ADDRLEN); |
| memcpy_toio(ptx->mac.addr_2, local->bss_id, 6); |
| memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_source, ADDRLEN); |
| } |
| else /* Terminal */ |
| { |
| writeb(FC2_TO_DS, &ptx->mac.frame_ctl_2); |
| memcpy_toio(ptx->mac.addr_1, local->bss_id, ADDRLEN); |
| memcpy_toio(ptx->mac.addr_2, ((struct ethhdr *)data)->h_source, ADDRLEN); |
| memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_dest, ADDRLEN); |
| } |
| } |
| } /* end encapsulate_frame */ |
| |
| |
| /*===========================================================================*/ |
| |
| static void netdev_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strcpy(info->driver, "ray_cs"); |
| } |
| |
| static const struct ethtool_ops netdev_ethtool_ops = { |
| .get_drvinfo = netdev_get_drvinfo, |
| }; |
| |
| /*====================================================================*/ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get protocol name |
| */ |
| static int ray_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| char *cwrq, |
| char *extra) |
| { |
| strcpy(cwrq, "IEEE 802.11-FH"); |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set frequency |
| */ |
| static int ray_set_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *fwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| /* Setting by channel number */ |
| if ((fwrq->m > USA_HOP_MOD) || (fwrq->e > 0)) |
| err = -EOPNOTSUPP; |
| else |
| local->sparm.b5.a_hop_pattern = fwrq->m; |
| |
| return err; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get frequency |
| */ |
| static int ray_get_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *fwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| fwrq->m = local->sparm.b5.a_hop_pattern; |
| fwrq->e = 0; |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set ESSID |
| */ |
| static int ray_set_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *dwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| /* Check if we asked for `any' */ |
| if(dwrq->flags == 0) { |
| /* Corey : can you do that ? */ |
| return -EOPNOTSUPP; |
| } else { |
| /* Check the size of the string */ |
| if(dwrq->length > IW_ESSID_MAX_SIZE) { |
| return -E2BIG; |
| } |
| |
| /* Set the ESSID in the card */ |
| memset(local->sparm.b5.a_current_ess_id, 0, IW_ESSID_MAX_SIZE); |
| memcpy(local->sparm.b5.a_current_ess_id, extra, dwrq->length); |
| } |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get ESSID |
| */ |
| static int ray_get_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *dwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| /* Get the essid that was set */ |
| memcpy(extra, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); |
| |
| /* Push it out ! */ |
| dwrq->length = strlen(extra); |
| dwrq->flags = 1; /* active */ |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get AP address |
| */ |
| static int ray_get_wap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *awrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| memcpy(awrq->sa_data, local->bss_id, ETH_ALEN); |
| awrq->sa_family = ARPHRD_ETHER; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set Bit-Rate |
| */ |
| static int ray_set_rate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| /* Check if rate is in range */ |
| if((vwrq->value != 1000000) && (vwrq->value != 2000000)) |
| return -EINVAL; |
| |
| /* Hack for 1.5 Mb/s instead of 2 Mb/s */ |
| if((local->fw_ver == 0x55) && /* Please check */ |
| (vwrq->value == 2000000)) |
| local->net_default_tx_rate = 3; |
| else |
| local->net_default_tx_rate = vwrq->value/500000; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get Bit-Rate |
| */ |
| static int ray_get_rate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| if(local->net_default_tx_rate == 3) |
| vwrq->value = 2000000; /* Hum... */ |
| else |
| vwrq->value = local->net_default_tx_rate * 500000; |
| vwrq->fixed = 0; /* We are in auto mode */ |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set RTS threshold |
| */ |
| static int ray_set_rts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| int rthr = vwrq->value; |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| /* if(wrq->u.rts.fixed == 0) we should complain */ |
| if(vwrq->disabled) |
| rthr = 32767; |
| else { |
| if((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */ |
| return -EINVAL; |
| } |
| local->sparm.b5.a_rts_threshold[0] = (rthr >> 8) & 0xFF; |
| local->sparm.b5.a_rts_threshold[1] = rthr & 0xFF; |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get RTS threshold |
| */ |
| static int ray_get_rts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| vwrq->value = (local->sparm.b5.a_rts_threshold[0] << 8) |
| + local->sparm.b5.a_rts_threshold[1]; |
| vwrq->disabled = (vwrq->value == 32767); |
| vwrq->fixed = 1; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set Fragmentation threshold |
| */ |
| static int ray_set_frag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| int fthr = vwrq->value; |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| /* if(wrq->u.frag.fixed == 0) should complain */ |
| if(vwrq->disabled) |
| fthr = 32767; |
| else { |
| if((fthr < 256) || (fthr > 2347)) /* To check out ! */ |
| return -EINVAL; |
| } |
| local->sparm.b5.a_frag_threshold[0] = (fthr >> 8) & 0xFF; |
| local->sparm.b5.a_frag_threshold[1] = fthr & 0xFF; |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get Fragmentation threshold |
| */ |
| static int ray_get_frag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *vwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| vwrq->value = (local->sparm.b5.a_frag_threshold[0] << 8) |
| + local->sparm.b5.a_frag_threshold[1]; |
| vwrq->disabled = (vwrq->value == 32767); |
| vwrq->fixed = 1; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set Mode of Operation |
| */ |
| static int ray_set_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| __u32 *uwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| char card_mode = 1; |
| |
| /* Reject if card is already initialised */ |
| if(local->card_status != CARD_AWAITING_PARAM) |
| return -EBUSY; |
| |
| switch (*uwrq) |
| { |
| case IW_MODE_ADHOC: |
| card_mode = 0; |
| // Fall through |
| case IW_MODE_INFRA: |
| local->sparm.b5.a_network_type = card_mode; |
| break; |
| default: |
| err = -EINVAL; |
| } |
| |
| return err; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get Mode of Operation |
| */ |
| static int ray_get_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| __u32 *uwrq, |
| char *extra) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| |
| if(local->sparm.b5.a_network_type) |
| *uwrq = IW_MODE_INFRA; |
| else |
| *uwrq = IW_MODE_ADHOC; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get range info |
| */ |
| static int ray_get_range(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *dwrq, |
| char *extra) |
| { |
| struct iw_range *range = (struct iw_range *) extra; |
| |
| memset((char *) range, 0, sizeof(struct iw_range)); |
| |
| /* Set the length (very important for backward compatibility) */ |
| dwrq->length = sizeof(struct iw_range); |
| |
| /* Set the Wireless Extension versions */ |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 9; |
| |
| /* Set information in the range struct */ |
| range->throughput = 1.1 * 1000 * 1000; /* Put the right number here */ |
| range->num_channels = hop_pattern_length[(int)country]; |
| range->num_frequency = 0; |
| range->max_qual.qual = 0; |
| range->max_qual.level = 255; /* What's the correct value ? */ |
| range->max_qual.noise = 255; /* Idem */ |
| range->num_bitrates = 2; |
| range->bitrate[0] = 1000000; /* 1 Mb/s */ |
| range->bitrate[1] = 2000000; /* 2 Mb/s */ |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : set framing mode |
| */ |
| static int ray_set_framing(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| translate = *(extra); /* Set framing mode */ |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : get framing mode |
| */ |
| static int ray_get_framing(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| *(extra) = translate; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : get country |
| */ |
| static int ray_get_country(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| *(extra) = country; |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Commit handler : called after a bunch of SET operations |
| */ |
| static int ray_commit(struct net_device *dev, |
| struct iw_request_info *info, /* NULL */ |
| void *zwrq, /* NULL */ |
| char *extra) /* NULL */ |
| { |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Stats handler : return Wireless Stats |
| */ |
| static iw_stats * ray_get_wireless_stats(struct net_device * dev) |
| { |
| ray_dev_t * local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| struct status __iomem *p = local->sram + STATUS_BASE; |
| |
| if(local == (ray_dev_t *) NULL) |
| return (iw_stats *) NULL; |
| |
| local->wstats.status = local->card_status; |
| #ifdef WIRELESS_SPY |
| if((local->spy_data.spy_number > 0) && (local->sparm.b5.a_network_type == 0)) |
| { |
| /* Get it from the first node in spy list */ |
| local->wstats.qual.qual = local->spy_data.spy_stat[0].qual; |
| local->wstats.qual.level = local->spy_data.spy_stat[0].level; |
| local->wstats.qual.noise = local->spy_data.spy_stat[0].noise; |
| local->wstats.qual.updated = local->spy_data.spy_stat[0].updated; |
| } |
| #endif /* WIRELESS_SPY */ |
| |
| if(pcmcia_dev_present(link)) { |
| local->wstats.qual.noise = readb(&p->rxnoise); |
| local->wstats.qual.updated |= 4; |
| } |
| |
| return &local->wstats; |
| } /* end ray_get_wireless_stats */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Structures to export the Wireless Handlers |
| */ |
| |
| static const iw_handler ray_handler[] = { |
| [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) ray_commit, |
| [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) ray_get_name, |
| [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) ray_set_freq, |
| [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) ray_get_freq, |
| [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) ray_set_mode, |
| [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) ray_get_mode, |
| [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) ray_get_range, |
| #ifdef WIRELESS_SPY |
| [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, |
| [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, |
| [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, |
| [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, |
| #endif /* WIRELESS_SPY */ |
| [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) ray_get_wap, |
| [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) ray_set_essid, |
| [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) ray_get_essid, |
| [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) ray_set_rate, |
| [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) ray_get_rate, |
| [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) ray_set_rts, |
| [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) ray_get_rts, |
| [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) ray_set_frag, |
| [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) ray_get_frag, |
| }; |
| |
| #define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ |
| #define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */ |
| #define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ |
| |
| static const iw_handler ray_private_handler[] = { |
| [0] = (iw_handler) ray_set_framing, |
| [1] = (iw_handler) ray_get_framing, |
| [3] = (iw_handler) ray_get_country, |
| }; |
| |
| static const struct iw_priv_args ray_private_args[] = { |
| /* cmd, set_args, get_args, name */ |
| { SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "set_framing" }, |
| { SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_framing" }, |
| { SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_country" }, |
| }; |
| |
| static const struct iw_handler_def ray_handler_def = |
| { |
| .num_standard = ARRAY_SIZE(ray_handler), |
| .num_private = ARRAY_SIZE(ray_private_handler), |
| .num_private_args = ARRAY_SIZE(ray_private_args), |
| .standard = ray_handler, |
| .private = ray_private_handler, |
| .private_args = ray_private_args, |
| .get_wireless_stats = ray_get_wireless_stats, |
| }; |
| |
| /*===========================================================================*/ |
| static int ray_open(struct net_device *dev) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link; |
| link = local->finder; |
| |
| DEBUG(1, "ray_open('%s')\n", dev->name); |
| |
| if (link->open == 0) |
| local->num_multi = 0; |
| link->open++; |
| |
| /* If the card is not started, time to start it ! - Jean II */ |
| if(local->card_status == CARD_AWAITING_PARAM) { |
| int i; |
| |
| DEBUG(1,"ray_open: doing init now !\n"); |
| |
| /* Download startup parameters */ |
| if ( (i = dl_startup_params(dev)) < 0) |
| { |
| printk(KERN_INFO "ray_dev_init dl_startup_params failed - " |
| "returns 0x%x\n",i); |
| return -1; |
| } |
| } |
| |
| if (sniffer) netif_stop_queue(dev); |
| else netif_start_queue(dev); |
| |
| DEBUG(2,"ray_open ending\n"); |
| return 0; |
| } /* end ray_open */ |
| /*===========================================================================*/ |
| static int ray_dev_close(struct net_device *dev) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link; |
| link = local->finder; |
| |
| DEBUG(1, "ray_dev_close('%s')\n", dev->name); |
| |
| link->open--; |
| netif_stop_queue(dev); |
| |
| /* In here, we should stop the hardware (stop card from beeing active) |
| * and set local->card_status to CARD_AWAITING_PARAM, so that while the |
| * card is closed we can chage its configuration. |
| * Probably also need a COR reset to get sane state - Jean II */ |
| |
| return 0; |
| } /* end ray_dev_close */ |
| /*===========================================================================*/ |
| static void ray_reset(struct net_device *dev) { |
| DEBUG(1,"ray_reset entered\n"); |
| return; |
| } |
| /*===========================================================================*/ |
| /* Cause a firmware interrupt if it is ready for one */ |
| /* Return nonzero if not ready */ |
| static int interrupt_ecf(ray_dev_t *local, int ccs) |
| { |
| int i = 50; |
| struct pcmcia_device *link = local->finder; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs interrupt_ecf - device not present\n"); |
| return -1; |
| } |
| DEBUG(2,"interrupt_ecf(local=%p, ccs = 0x%x\n",local,ccs); |
| |
| while ( i && |
| (readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) & ECF_INTR_SET)) |
| i--; |
| if (i == 0) { |
| DEBUG(2,"ray_cs interrupt_ecf card not ready for interrupt\n"); |
| return -1; |
| } |
| /* Fill the mailbox, then kick the card */ |
| writeb(ccs, local->sram + SCB_BASE); |
| writeb(ECF_INTR_SET, local->amem + CIS_OFFSET + ECF_INTR_OFFSET); |
| return 0; |
| } /* interrupt_ecf */ |
| /*===========================================================================*/ |
| /* Get next free transmit CCS */ |
| /* Return - index of current tx ccs */ |
| static int get_free_tx_ccs(ray_dev_t *local) |
| { |
| int i; |
| struct ccs __iomem *pccs = ccs_base(local); |
| struct pcmcia_device *link = local->finder; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs get_free_tx_ccs - device not present\n"); |
| return ECARDGONE; |
| } |
| |
| if (test_and_set_bit(0,&local->tx_ccs_lock)) { |
| DEBUG(1,"ray_cs tx_ccs_lock busy\n"); |
| return ECCSBUSY; |
| } |
| |
| for (i=0; i < NUMBER_OF_TX_CCS; i++) { |
| if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) { |
| writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status); |
| writeb(CCS_END_LIST, &(pccs+i)->link); |
| local->tx_ccs_lock = 0; |
| return i; |
| } |
| } |
| local->tx_ccs_lock = 0; |
| DEBUG(2,"ray_cs ERROR no free tx CCS for raylink card\n"); |
| return ECCSFULL; |
| } /* get_free_tx_ccs */ |
| /*===========================================================================*/ |
| /* Get next free CCS */ |
| /* Return - index of current ccs */ |
| static int get_free_ccs(ray_dev_t *local) |
| { |
| int i; |
| struct ccs __iomem *pccs = ccs_base(local); |
| struct pcmcia_device *link = local->finder; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs get_free_ccs - device not present\n"); |
| return ECARDGONE; |
| } |
| if (test_and_set_bit(0,&local->ccs_lock)) { |
| DEBUG(1,"ray_cs ccs_lock busy\n"); |
| return ECCSBUSY; |
| } |
| |
| for (i = NUMBER_OF_TX_CCS; i < NUMBER_OF_CCS; i++) { |
| if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) { |
| writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status); |
| writeb(CCS_END_LIST, &(pccs+i)->link); |
| local->ccs_lock = 0; |
| return i; |
| } |
| } |
| local->ccs_lock = 0; |
| DEBUG(1,"ray_cs ERROR no free CCS for raylink card\n"); |
| return ECCSFULL; |
| } /* get_free_ccs */ |
| /*===========================================================================*/ |
| static void authenticate_timeout(u_long data) |
| { |
| ray_dev_t *local = (ray_dev_t *)data; |
| del_timer(&local->timer); |
| printk(KERN_INFO "ray_cs Authentication with access point failed" |
| " - timeout\n"); |
| join_net((u_long)local); |
| } |
| /*===========================================================================*/ |
| static int asc_to_int(char a) |
| { |
| if (a < '0') return -1; |
| if (a <= '9') return (a - '0'); |
| if (a < 'A') return -1; |
| if (a <= 'F') return (10 + a - 'A'); |
| if (a < 'a') return -1; |
| if (a <= 'f') return (10 + a - 'a'); |
| return -1; |
| } |
| /*===========================================================================*/ |
| static int parse_addr(char *in_str, UCHAR *out) |
| { |
| int len; |
| int i,j,k; |
| int status; |
| |
| if (in_str == NULL) return 0; |
| if ((len = strlen(in_str)) < 2) return 0; |
| memset(out, 0, ADDRLEN); |
| |
| status = 1; |
| j = len - 1; |
| if (j > 12) j = 12; |
| i = 5; |
| |
| while (j > 0) |
| { |
| if ((k = asc_to_int(in_str[j--])) != -1) out[i] = k; |
| else return 0; |
| |
| if (j == 0) break; |
| if ((k = asc_to_int(in_str[j--])) != -1) out[i] += k << 4; |
| else return 0; |
| if (!i--) break; |
| } |
| return status; |
| } |
| /*===========================================================================*/ |
| static struct net_device_stats *ray_get_stats(struct net_device *dev) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| struct status __iomem *p = local->sram + STATUS_BASE; |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs net_device_stats - device not present\n"); |
| return &local->stats; |
| } |
| if (readb(&p->mrx_overflow_for_host)) |
| { |
| local->stats.rx_over_errors += swab16(readw(&p->mrx_overflow)); |
| writeb(0,&p->mrx_overflow); |
| writeb(0,&p->mrx_overflow_for_host); |
| } |
| if (readb(&p->mrx_checksum_error_for_host)) |
| { |
| local->stats.rx_crc_errors += swab16(readw(&p->mrx_checksum_error)); |
| writeb(0,&p->mrx_checksum_error); |
| writeb(0,&p->mrx_checksum_error_for_host); |
| } |
| if (readb(&p->rx_hec_error_for_host)) |
| { |
| local->stats.rx_frame_errors += swab16(readw(&p->rx_hec_error)); |
| writeb(0,&p->rx_hec_error); |
| writeb(0,&p->rx_hec_error_for_host); |
| } |
| return &local->stats; |
| } |
| /*===========================================================================*/ |
| static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| int ccsindex; |
| int i; |
| struct ccs __iomem *pccs; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_update_parm - device not present\n"); |
| return; |
| } |
| |
| if ((ccsindex = get_free_ccs(local)) < 0) |
| { |
| DEBUG(0,"ray_update_parm - No free ccs\n"); |
| return; |
| } |
| pccs = ccs_base(local) + ccsindex; |
| writeb(CCS_UPDATE_PARAMS, &pccs->cmd); |
| writeb(objid, &pccs->var.update_param.object_id); |
| writeb(1, &pccs->var.update_param.number_objects); |
| writeb(0, &pccs->var.update_param.failure_cause); |
| for (i=0; i<len; i++) { |
| writeb(value[i], local->sram + HOST_TO_ECF_BASE); |
| } |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(0,"ray_cs associate failed - ECF not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| } |
| } |
| /*===========================================================================*/ |
| static void ray_update_multi_list(struct net_device *dev, int all) |
| { |
| struct dev_mc_list *dmi, **dmip; |
| int ccsindex; |
| struct ccs __iomem *pccs; |
| int i = 0; |
| ray_dev_t *local = netdev_priv(dev); |
| struct pcmcia_device *link = local->finder; |
| void __iomem *p = local->sram + HOST_TO_ECF_BASE; |
| |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_update_multi_list - device not present\n"); |
| return; |
| } |
| else |
| DEBUG(2,"ray_update_multi_list(%p)\n",dev); |
| if ((ccsindex = get_free_ccs(local)) < 0) |
| { |
| DEBUG(1,"ray_update_multi - No free ccs\n"); |
| return; |
| } |
| pccs = ccs_base(local) + ccsindex; |
| writeb(CCS_UPDATE_MULTICAST_LIST, &pccs->cmd); |
| |
| if (all) { |
| writeb(0xff, &pccs->var); |
| local->num_multi = 0xff; |
| } |
| else { |
| /* Copy the kernel's list of MC addresses to card */ |
| for (dmip=&dev->mc_list; (dmi=*dmip)!=NULL; dmip=&dmi->next) { |
| memcpy_toio(p, dmi->dmi_addr, ETH_ALEN); |
| DEBUG(1,"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",dmi->dmi_addr[0],dmi->dmi_addr[1],dmi->dmi_addr[2],dmi->dmi_addr[3],dmi->dmi_addr[4],dmi->dmi_addr[5]); |
| p += ETH_ALEN; |
| i++; |
| } |
| if (i > 256/ADDRLEN) i = 256/ADDRLEN; |
| writeb((UCHAR)i, &pccs->var); |
| DEBUG(1,"ray_cs update_multi %d addresses in list\n", i); |
| /* Interrupt the firmware to process the command */ |
| local->num_multi = i; |
| } |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(1,"ray_cs update_multi failed - ECF not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| } |
| } /* end ray_update_multi_list */ |
| /*===========================================================================*/ |
| static void set_multicast_list(struct net_device *dev) |
| { |
| ray_dev_t *local = netdev_priv(dev); |
| UCHAR promisc; |
| |
| DEBUG(2,"ray_cs set_multicast_list(%p)\n",dev); |
| |
| if (dev->flags & IFF_PROMISC) |
| { |
| if (local->sparm.b5.a_promiscuous_mode == 0) { |
| DEBUG(1,"ray_cs set_multicast_list promisc on\n"); |
| local->sparm.b5.a_promiscuous_mode = 1; |
| promisc = 1; |
| ray_update_parm(dev, OBJID_promiscuous_mode, \ |
| &promisc, sizeof(promisc)); |
| } |
| } |
| else { |
| if (local->sparm.b5.a_promiscuous_mode == 1) { |
| DEBUG(1,"ray_cs set_multicast_list promisc off\n"); |
| local->sparm.b5.a_promiscuous_mode = 0; |
| promisc = 0; |
| ray_update_parm(dev, OBJID_promiscuous_mode, \ |
| &promisc, sizeof(promisc)); |
| } |
| } |
| |
| if (dev->flags & IFF_ALLMULTI) ray_update_multi_list(dev, 1); |
| else |
| { |
| if (local->num_multi != dev->mc_count) ray_update_multi_list(dev, 0); |
| } |
| } /* end set_multicast_list */ |
| /*============================================================================= |
| * All routines below here are run at interrupt time. |
| =============================================================================*/ |
| static irqreturn_t ray_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct pcmcia_device *link; |
| ray_dev_t *local; |
| struct ccs __iomem *pccs; |
| struct rcs __iomem *prcs; |
| UCHAR rcsindex; |
| UCHAR tmp; |
| UCHAR cmd; |
| UCHAR status; |
| |
| if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */ |
| return IRQ_NONE; |
| |
| DEBUG(4,"ray_cs: interrupt for *dev=%p\n",dev); |
| |
| local = netdev_priv(dev); |
| link = (struct pcmcia_device *)local->finder; |
| if (!pcmcia_dev_present(link)) { |
| DEBUG(2,"ray_cs interrupt from device not present or suspended.\n"); |
| return IRQ_NONE; |
| } |
| rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index); |
| |
| if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) |
| { |
| DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex); |
| clear_interrupt(local); |
| return IRQ_HANDLED; |
| } |
| if (rcsindex < NUMBER_OF_CCS) /* If it's a returned CCS */ |
| { |
| pccs = ccs_base(local) + rcsindex; |
| cmd = readb(&pccs->cmd); |
| status = readb(&pccs->buffer_status); |
| switch (cmd) |
| { |
| case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */ |
| del_timer(&local->timer); |
| if (status == CCS_COMMAND_COMPLETE) { |
| DEBUG(1,"ray_cs interrupt download_startup_parameters OK\n"); |
| } |
| else { |
| DEBUG(1,"ray_cs interrupt download_startup_parameters fail\n"); |
| } |
| break; |
| case CCS_UPDATE_PARAMS: |
| DEBUG(1,"ray_cs interrupt update params done\n"); |
| if (status != CCS_COMMAND_COMPLETE) { |
| tmp = readb(&pccs->var.update_param.failure_cause); |
| DEBUG(0,"ray_cs interrupt update params failed - reason %d\n",tmp); |
| } |
| break; |
| case CCS_REPORT_PARAMS: |
| DEBUG(1,"ray_cs interrupt report params done\n"); |
| break; |
| case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */ |
| DEBUG(1,"ray_cs interrupt CCS Update Multicast List done\n"); |
| break; |
| case CCS_UPDATE_POWER_SAVINGS_MODE: |
| DEBUG(1,"ray_cs interrupt update power save mode done\n"); |
| break; |
| case CCS_START_NETWORK: |
| case CCS_JOIN_NETWORK: |
| if (status == CCS_COMMAND_COMPLETE) { |
| if (readb(&pccs->var.start_network.net_initiated) == 1) { |
| DEBUG(0,"ray_cs interrupt network \"%s\" started\n",\ |
| local->sparm.b4.a_current_ess_id); |
| } |
| else { |
| DEBUG(0,"ray_cs interrupt network \"%s\" joined\n",\ |
| local->sparm.b4.a_current_ess_id); |
| } |
| memcpy_fromio(&local->bss_id,pccs->var.start_network.bssid,ADDRLEN); |
| |
| if (local->fw_ver == 0x55) local->net_default_tx_rate = 3; |
| else local->net_default_tx_rate = |
| readb(&pccs->var.start_network.net_default_tx_rate); |
| local->encryption = readb(&pccs->var.start_network.encryption); |
| if (!sniffer && (local->net_type == INFRA) |
| && !(local->sparm.b4.a_acting_as_ap_status)) { |
| authenticate(local); |
| } |
| local->card_status = CARD_ACQ_COMPLETE; |
| } |
| else { |
| local->card_status = CARD_ACQ_FAILED; |
| |
| del_timer(&local->timer); |
| local->timer.expires = jiffies + HZ*5; |
| local->timer.data = (long)local; |
| if (status == CCS_START_NETWORK) { |
| DEBUG(0,"ray_cs interrupt network \"%s\" start failed\n",\ |
| local->sparm.b4.a_current_ess_id); |
| local->timer.function = &start_net; |
| } |
| else { |
| DEBUG(0,"ray_cs interrupt network \"%s\" join failed\n",\ |
| local->sparm.b4.a_current_ess_id); |
| local->timer.function = &join_net; |
| } |
| add_timer(&local->timer); |
| } |
| break; |
| case CCS_START_ASSOCIATION: |
| if (status == CCS_COMMAND_COMPLETE) { |
| local->card_status = CARD_ASSOC_COMPLETE; |
| DEBUG(0,"ray_cs association successful\n"); |
| } |
| else |
| { |
| DEBUG(0,"ray_cs association failed,\n"); |
| local->card_status = CARD_ASSOC_FAILED; |
| join_net((u_long)local); |
| } |
| break; |
| case CCS_TX_REQUEST: |
| if (status == CCS_COMMAND_COMPLETE) { |
| DEBUG(3,"ray_cs interrupt tx request complete\n"); |
| } |
| else { |
| DEBUG(1,"ray_cs interrupt tx request failed\n"); |
| } |
| if (!sniffer) netif_start_queue(dev); |
| netif_wake_queue(dev); |
| break; |
| case CCS_TEST_MEMORY: |
| DEBUG(1,"ray_cs interrupt mem test done\n"); |
| break; |
| case CCS_SHUTDOWN: |
| DEBUG(1,"ray_cs interrupt Unexpected CCS returned - Shutdown\n"); |
| break; |
| case CCS_DUMP_MEMORY: |
| DEBUG(1,"ray_cs interrupt dump memory done\n"); |
| break; |
| case CCS_START_TIMER: |
| DEBUG(2,"ray_cs interrupt DING - raylink timer expired\n"); |
| break; |
| default: |
| DEBUG(1,"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",\ |
| rcsindex, cmd); |
| } |
| writeb(CCS_BUFFER_FREE, &pccs->buffer_status); |
| } |
| else /* It's an RCS */ |
| { |
| prcs = rcs_base(local) + rcsindex; |
| |
| switch (readb(&prcs->interrupt_id)) |
| { |
| case PROCESS_RX_PACKET: |
| ray_rx(dev, local, prcs); |
| break; |
| case REJOIN_NET_COMPLETE: |
| DEBUG(1,"ray_cs interrupt rejoin net complete\n"); |
| local->card_status = CARD_ACQ_COMPLETE; |
| /* do we need to clear tx buffers CCS's? */ |
| if (local->sparm.b4.a_network_type == ADHOC) { |
| if (!sniffer) netif_start_queue(dev); |
| } |
| else { |
| memcpy_fromio(&local->bss_id, prcs->var.rejoin_net_complete.bssid, ADDRLEN); |
| DEBUG(1,"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",\ |
| local->bss_id[0], local->bss_id[1], local->bss_id[2],\ |
| local->bss_id[3], local->bss_id[4], local->bss_id[5]); |
| if (!sniffer) authenticate(local); |
| } |
| break; |
| case ROAMING_INITIATED: |
| DEBUG(1,"ray_cs interrupt roaming initiated\n"); |
| netif_stop_queue(dev); |
| local->card_status = CARD_DOING_ACQ; |
| break; |
| case JAPAN_CALL_SIGN_RXD: |
| DEBUG(1,"ray_cs interrupt japan call sign rx\n"); |
| break; |
| default: |
| DEBUG(1,"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",\ |
| rcsindex, (unsigned int) readb(&prcs->interrupt_id)); |
| break; |
| } |
| writeb(CCS_BUFFER_FREE, &prcs->buffer_status); |
| } |
| clear_interrupt(local); |
| return IRQ_HANDLED; |
| } /* ray_interrupt */ |
| /*===========================================================================*/ |
| static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs) |
| { |
| int rx_len; |
| unsigned int pkt_addr; |
| void __iomem *pmsg; |
| DEBUG(4,"ray_rx process rx packet\n"); |
| |
| /* Calculate address of packet within Rx buffer */ |
| pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8) |
| + readb(&prcs->var.rx_packet.rx_data_ptr[1])) & RX_BUFF_END; |
| /* Length of first packet fragment */ |
| rx_len = (readb(&prcs->var.rx_packet.rx_data_length[0]) << 8) |
| + readb(&prcs->var.rx_packet.rx_data_length[1]); |
| |
| local->last_rsl = readb(&prcs->var.rx_packet.rx_sig_lev); |
| pmsg = local->rmem + pkt_addr; |
| switch(readb(pmsg)) |
| { |
| case DATA_TYPE: |
| DEBUG(4,"ray_rx data type\n"); |
| rx_data(dev, prcs, pkt_addr, rx_len); |
| break; |
| case AUTHENTIC_TYPE: |
| DEBUG(4,"ray_rx authentic type\n"); |
| if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); |
| else rx_authenticate(local, prcs, pkt_addr, rx_len); |
| break; |
| case DEAUTHENTIC_TYPE: |
| DEBUG(4,"ray_rx deauth type\n"); |
| if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); |
| else rx_deauthenticate(local, prcs, pkt_addr, rx_len); |
| break; |
| case NULL_MSG_TYPE: |
| DEBUG(3,"ray_cs rx NULL msg\n"); |
| break; |
| case BEACON_TYPE: |
| DEBUG(4,"ray_rx beacon type\n"); |
| if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); |
| |
| copy_from_rx_buff(local, (UCHAR *)&local->last_bcn, pkt_addr, |
| rx_len < sizeof(struct beacon_rx) ? |
| rx_len : sizeof(struct beacon_rx)); |
| |
| local->beacon_rxed = 1; |
| /* Get the statistics so the card counters never overflow */ |
| ray_get_stats(dev); |
| break; |
| default: |
| DEBUG(0,"ray_cs unknown pkt type %2x\n", (unsigned int) readb(pmsg)); |
| break; |
| } |
| |
| } /* end ray_rx */ |
| /*===========================================================================*/ |
| static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr, |
| int rx_len) |
| { |
| struct sk_buff *skb = NULL; |
| struct rcs __iomem *prcslink = prcs; |
| ray_dev_t *local = netdev_priv(dev); |
| UCHAR *rx_ptr; |
| int total_len; |
| int tmp; |
| #ifdef WIRELESS_SPY |
| int siglev = local->last_rsl; |
| u_char linksrcaddr[ETH_ALEN]; /* Other end of the wireless link */ |
| #endif |
| |
| if (!sniffer) { |
| if (translate) { |
| /* TBD length needs fixing for translated header */ |
| if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) || |
| rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN)) |
| { |
| DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len); |
| return; |
| } |
| } |
| else /* encapsulated ethernet */ { |
| if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) || |
| rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN)) |
| { |
| DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len); |
| return; |
| } |
| } |
| } |
| DEBUG(4,"ray_cs rx_data packet\n"); |
| /* If fragmented packet, verify sizes of fragments add up */ |
| if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) { |
| DEBUG(1,"ray_cs rx'ed fragment\n"); |
| tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8) |
| + readb(&prcs->var.rx_packet.totalpacketlength[1]); |
| total_len = tmp; |
| prcslink = prcs; |
| do { |
| tmp -= (readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8) |
| + readb(&prcslink->var.rx_packet.rx_data_length[1]); |
| if (readb(&prcslink->var.rx_packet.next_frag_rcs_index) == 0xFF |
| || tmp < 0) break; |
| prcslink = rcs_base(local) |
| + readb(&prcslink->link_field); |
| } while (1); |
| |
| if (tmp < 0) |
| { |
| DEBUG(0,"ray_cs rx_data fragment lengths don't add up\n"); |
| local->stats.rx_dropped++; |
| release_frag_chain(local, prcs); |
| return; |
| } |
| } |
| else { /* Single unfragmented packet */ |
| total_len = rx_len; |
| } |
| |
| skb = dev_alloc_skb( total_len+5 ); |
| if (skb == NULL) |
| { |
| DEBUG(0,"ray_cs rx_data could not allocate skb\n"); |
| local->stats.rx_dropped++; |
| if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) |
| release_frag_chain(local, prcs); |
| return; |
| } |
| skb_reserve( skb, 2); /* Align IP on 16 byte (TBD check this)*/ |
| |
| DEBUG(4,"ray_cs rx_data total_len = %x, rx_len = %x\n",total_len,rx_len); |
| |
| /************************/ |
| /* Reserve enough room for the whole damn packet. */ |
| rx_ptr = skb_put( skb, total_len); |
| /* Copy the whole packet to sk_buff */ |
| rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr & RX_BUFF_END, rx_len); |
| /* Get source address */ |
| #ifdef WIRELESS_SPY |
| skb_copy_from_linear_data_offset(skb, offsetof(struct mac_header, addr_2), |
| linksrcaddr, ETH_ALEN); |
| #endif |
| /* Now, deal with encapsulation/translation/sniffer */ |
| if (!sniffer) { |
| if (!translate) { |
| /* Encapsulated ethernet, so just lop off 802.11 MAC header */ |
| /* TBD reserve skb_reserve( skb, RX_MAC_HEADER_LENGTH); */ |
| skb_pull( skb, RX_MAC_HEADER_LENGTH); |
| } |
| else { |
| /* Do translation */ |
| untranslate(local, skb, total_len); |
| } |
| } |
| else |
| { /* sniffer mode, so just pass whole packet */ }; |
| |
| /************************/ |
| /* Now pick up the rest of the fragments if any */ |
| tmp = 17; |
| if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) { |
| prcslink = prcs; |
| DEBUG(1,"ray_cs rx_data in fragment loop\n"); |
| do { |
| prcslink = rcs_base(local) |
| + readb(&prcslink->var.rx_packet.next_frag_rcs_index); |
| rx_len = (( readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8) |
| + readb(&prcslink->var.rx_packet.rx_data_length[1])) |
| & RX_BUFF_END; |
| pkt_addr = (( readb(&prcslink->var.rx_packet.rx_data_ptr[0]) << 8) |
| + readb(&prcslink->var.rx_packet.rx_data_ptr[1])) |
| & RX_BUFF_END; |
| |
| rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr, rx_len); |
| |
| } while (tmp-- && |
| readb(&prcslink->var.rx_packet.next_frag_rcs_index) != 0xFF); |
| release_frag_chain(local, prcs); |
| } |
| |
| skb->protocol = eth_type_trans(skb,dev); |
| netif_rx(skb); |
| dev->last_rx = jiffies; |
| local->stats.rx_packets++; |
| local->stats.rx_bytes += total_len; |
| |
| /* Gather signal strength per address */ |
| #ifdef WIRELESS_SPY |
| /* For the Access Point or the node having started the ad-hoc net |
| * note : ad-hoc work only in some specific configurations, but we |
| * kludge in ray_get_wireless_stats... */ |
| if(!memcmp(linksrcaddr, local->bss_id, ETH_ALEN)) |
| { |
| /* Update statistics */ |
| /*local->wstats.qual.qual = none ? */ |
| local->wstats.qual.level = siglev; |
| /*local->wstats.qual.noise = none ? */ |
| local->wstats.qual.updated = 0x2; |
| } |
| /* Now, update the spy stuff */ |
| { |
| struct iw_quality wstats; |
| wstats.level = siglev; |
| /* wstats.noise = none ? */ |
| /* wstats.qual = none ? */ |
| wstats.updated = 0x2; |
| /* Update spy records */ |
| wireless_spy_update(dev, linksrcaddr, &wstats); |
| } |
| #endif /* WIRELESS_SPY */ |
| } /* end rx_data */ |
| /*===========================================================================*/ |
| static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len) |
| { |
| snaphdr_t *psnap = (snaphdr_t *)(skb->data + RX_MAC_HEADER_LENGTH); |
| struct ieee80211_hdr *pmac = (struct ieee80211_hdr *)skb->data; |
| __be16 type = *(__be16 *)psnap->ethertype; |
| int delta; |
| struct ethhdr *peth; |
| UCHAR srcaddr[ADDRLEN]; |
| UCHAR destaddr[ADDRLEN]; |
| static UCHAR org_bridge[3] = {0, 0, 0xf8}; |
| static UCHAR org_1042[3] = {0, 0, 0}; |
| |
| memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN); |
| memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN); |
| |
| #ifdef PCMCIA_DEBUG |
| if (pc_debug > 3) { |
| int i; |
| printk(KERN_DEBUG "skb->data before untranslate"); |
| for (i=0;i<64;i++) |
| printk("%02x ",skb->data[i]); |
| printk("\n" KERN_DEBUG "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n", |
| ntohs(type), |
| psnap->dsap, psnap->ssap, psnap->ctrl, |
| psnap->org[0], psnap->org[1], psnap->org[2]); |
| printk(KERN_DEBUG "untranslate skb->data = %p\n",skb->data); |
| } |
| #endif |
| |
| if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) { |
| /* not a snap type so leave it alone */ |
| DEBUG(3,"ray_cs untranslate NOT SNAP %02x %02x %02x\n", |
| psnap->dsap, psnap->ssap, psnap->ctrl); |
| |
| delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; |
| peth = (struct ethhdr *)(skb->data + delta); |
| peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH); |
| } |
| else { /* Its a SNAP */ |
| if (memcmp(psnap->org, org_bridge, 3) == 0) { /* EtherII and nuke the LLC */ |
| DEBUG(3,"ray_cs untranslate Bridge encap\n"); |
| delta = RX_MAC_HEADER_LENGTH |
| + sizeof(struct snaphdr_t) - ETH_HLEN; |
| peth = (struct ethhdr *)(skb->data + delta); |
| peth->h_proto = type; |
| } else if (memcmp(psnap->org, org_1042, 3) == 0) { |
| switch (ntohs(type)) { |
| case ETH_P_IPX: |
| case ETH_P_AARP: |
| DEBUG(3,"ray_cs untranslate RFC IPX/AARP\n"); |
| delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; |
| peth = (struct ethhdr *)(skb->data + delta); |
| peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH); |
| break; |
| default: |
| DEBUG(3,"ray_cs untranslate RFC default\n"); |
| delta = RX_MAC_HEADER_LENGTH + |
| sizeof(struct snaphdr_t) - ETH_HLEN; |
| peth = (struct ethhdr *)(skb->data + delta); |
| peth->h_proto = type; |
| break; |
| } |
| } else { |
| printk("ray_cs untranslate very confused by packet\n"); |
| delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; |
| peth = (struct ethhdr *)(skb->data + delta); |
| peth->h_proto = type; |
| } |
| } |
| /* TBD reserve skb_reserve(skb, delta); */ |
| skb_pull(skb, delta); |
| DEBUG(3,"untranslate after skb_pull(%d), skb->data = %p\n",delta,skb->data); |
| memcpy(peth->h_dest, destaddr, ADDRLEN); |
| memcpy(peth->h_source, srcaddr, ADDRLEN); |
| #ifdef PCMCIA_DEBUG |
| if (pc_debug > 3) { |
| int i; |
| printk(KERN_DEBUG "skb->data after untranslate:"); |
| for (i=0;i<64;i++) |
| printk("%02x ",skb->data[i]); |
| printk("\n"); |
| } |
| #endif |
| } /* end untranslate */ |
| /*===========================================================================*/ |
| /* Copy data from circular receive buffer to PC memory. |
| * dest = destination address in PC memory |
| * pkt_addr = source address in receive buffer |
| * len = length of packet to copy |
| */ |
| static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int length) |
| { |
| int wrap_bytes = (pkt_addr + length) - (RX_BUFF_END + 1); |
| if (wrap_bytes <= 0) |
| { |
| memcpy_fromio(dest,local->rmem + pkt_addr,length); |
| } |
| else /* Packet wrapped in circular buffer */ |
| { |
| memcpy_fromio(dest,local->rmem+pkt_addr,length - wrap_bytes); |
| memcpy_fromio(dest + length - wrap_bytes, local->rmem, wrap_bytes); |
| } |
| return length; |
| } |
| /*===========================================================================*/ |
| static void release_frag_chain(ray_dev_t *local, struct rcs __iomem * prcs) |
| { |
| struct rcs __iomem *prcslink = prcs; |
| int tmp = 17; |
| unsigned rcsindex = readb(&prcs->var.rx_packet.next_frag_rcs_index); |
| |
| while (tmp--) { |
| writeb(CCS_BUFFER_FREE, &prcslink->buffer_status); |
| if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) { |
| DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex); |
| break; |
| } |
| prcslink = rcs_base(local) + rcsindex; |
| rcsindex = readb(&prcslink->var.rx_packet.next_frag_rcs_index); |
| } |
| writeb(CCS_BUFFER_FREE, &prcslink->buffer_status); |
| } |
| /*===========================================================================*/ |
| static void authenticate(ray_dev_t *local) |
| { |
| struct pcmcia_device *link = local->finder; |
| DEBUG(0,"ray_cs Starting authentication.\n"); |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs authenticate - device not present\n"); |
| return; |
| } |
| |
| del_timer(&local->timer); |
| if (build_auth_frame(local, local->bss_id, OPEN_AUTH_REQUEST)) { |
| local->timer.function = &join_net; |
| } |
| else { |
| local->timer.function = &authenticate_timeout; |
| } |
| local->timer.expires = jiffies + HZ*2; |
| local->timer.data = (long)local; |
| add_timer(&local->timer); |
| local->authentication_state = AWAITING_RESPONSE; |
| } /* end authenticate */ |
| /*===========================================================================*/ |
| static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs, |
| unsigned int pkt_addr, int rx_len) |
| { |
| UCHAR buff[256]; |
| struct rx_msg *msg = (struct rx_msg *)buff; |
| |
| del_timer(&local->timer); |
| |
| copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff); |
| /* if we are trying to get authenticated */ |
| if (local->sparm.b4.a_network_type == ADHOC) { |
| DEBUG(1,"ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n", msg->var[0],msg->var[1],msg->var[2],msg->var[3],msg->var[4],msg->var[5]); |
| if (msg->var[2] == 1) { |
| DEBUG(0,"ray_cs Sending authentication response.\n"); |
| if (!build_auth_frame (local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) { |
| local->authentication_state = NEED_TO_AUTH; |
| memcpy(local->auth_id, msg->mac.addr_2, ADDRLEN); |
| } |
| } |
| } |
| else /* Infrastructure network */ |
| { |
| if (local->authentication_state == AWAITING_RESPONSE) { |
| /* Verify authentication sequence #2 and success */ |
| if (msg->var[2] == 2) { |
| if ((msg->var[3] | msg->var[4]) == 0) { |
| DEBUG(1,"Authentication successful\n"); |
| local->card_status = CARD_AUTH_COMPLETE; |
| associate(local); |
| local->authentication_state = AUTHENTICATED; |
| } |
| else { |
| DEBUG(0,"Authentication refused\n"); |
| local->card_status = CARD_AUTH_REFUSED; |
| join_net((u_long)local); |
| local->authentication_state = UNAUTHENTICATED; |
| } |
| } |
| } |
| } |
| |
| } /* end rx_authenticate */ |
| /*===========================================================================*/ |
| static void associate(ray_dev_t *local) |
| { |
| struct ccs __iomem *pccs; |
| struct pcmcia_device *link = local->finder; |
| struct net_device *dev = link->priv; |
| int ccsindex; |
| if (!(pcmcia_dev_present(link))) { |
| DEBUG(2,"ray_cs associate - device not present\n"); |
| return; |
| } |
| /* If no tx buffers available, return*/ |
| if ((ccsindex = get_free_ccs(local)) < 0) |
| { |
| /* TBD should never be here but... what if we are? */ |
| DEBUG(1,"ray_cs associate - No free ccs\n"); |
| return; |
| } |
| DEBUG(1,"ray_cs Starting association with access point\n"); |
| pccs = ccs_base(local) + ccsindex; |
| /* fill in the CCS */ |
| writeb(CCS_START_ASSOCIATION, &pccs->cmd); |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(1,"ray_cs associate failed - ECF not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| |
| del_timer(&local->timer); |
| local->timer.expires = jiffies + HZ*2; |
| local->timer.data = (long)local; |
| local->timer.function = &join_net; |
| add_timer(&local->timer); |
| local->card_status = CARD_ASSOC_FAILED; |
| return; |
| } |
| if (!sniffer) netif_start_queue(dev); |
| |
| } /* end associate */ |
| /*===========================================================================*/ |
| static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs, |
| unsigned int pkt_addr, int rx_len) |
| { |
| /* UCHAR buff[256]; |
| struct rx_msg *msg = (struct rx_msg *)buff; |
| */ |
| DEBUG(0,"Deauthentication frame received\n"); |
| local->authentication_state = UNAUTHENTICATED; |
| /* Need to reauthenticate or rejoin depending on reason code */ |
| /* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff); |
| */ |
| } |
| /*===========================================================================*/ |
| static void clear_interrupt(ray_dev_t *local) |
| { |
| writeb(0, local->amem + CIS_OFFSET + HCS_INTR_OFFSET); |
| } |
| /*===========================================================================*/ |
| #ifdef CONFIG_PROC_FS |
| #define MAXDATA (PAGE_SIZE - 80) |
| |
| static char *card_status[] = { |
| "Card inserted - uninitialized", /* 0 */ |
| "Card not downloaded", /* 1 */ |
| "Waiting for download parameters", /* 2 */ |
| "Card doing acquisition", /* 3 */ |
| "Acquisition complete", /* 4 */ |
| "Authentication complete", /* 5 */ |
| "Association complete", /* 6 */ |
| "???", "???", "???", "???", /* 7 8 9 10 undefined */ |
| "Card init error", /* 11 */ |
| "Download parameters error", /* 12 */ |
| "???", /* 13 */ |
| "Acquisition failed", /* 14 */ |
| "Authentication refused", /* 15 */ |
| "Association failed" /* 16 */ |
| }; |
| |
| static char *nettype[] = {"Adhoc", "Infra "}; |
| static char *framing[] = {"Encapsulation", "Translation"} |
| ; |
| /*===========================================================================*/ |
| static int ray_cs_proc_show(struct seq_file *m, void *v) |
| { |
| /* Print current values which are not available via other means |
| * eg ifconfig |
| */ |
| int i; |
| struct pcmcia_device *link; |
| struct net_device *dev; |
| ray_dev_t *local; |
| UCHAR *p; |
| struct freq_hop_element *pfh; |
| UCHAR c[33]; |
| |
| link = this_device; |
| if (!link) |
| return 0; |
| dev = (struct net_device *)link->priv; |
| if (!dev) |
| return 0; |
| local = netdev_priv(dev); |
| if (!local) |
| return 0; |
| |
| seq_puts(m, "Raylink Wireless LAN driver status\n"); |
| seq_printf(m, "%s\n", rcsid); |
| /* build 4 does not report version, and field is 0x55 after memtest */ |
| seq_puts(m, "Firmware version = "); |
| if (local->fw_ver == 0x55) |
| seq_puts(m, "4 - Use dump_cis for more details\n"); |
| else |
| seq_printf(m, "%2d.%02d.%02d\n", |
| local->fw_ver, local->fw_bld, local->fw_var); |
| |
| for (i=0; i<32; i++) c[i] = local->sparm.b5.a_current_ess_id[i]; |
| c[32] = 0; |
| seq_printf(m, "%s network ESSID = \"%s\"\n", |
| nettype[local->sparm.b5.a_network_type], c); |
| |
| p = local->bss_id; |
| seq_printf(m, "BSSID = %pM\n", p); |
| |
| seq_printf(m, "Country code = %d\n", |
| local->sparm.b5.a_curr_country_code); |
| |
| i = local->card_status; |
| if (i < 0) i = 10; |
| if (i > 16) i = 10; |
| seq_printf(m, "Card status = %s\n", card_status[i]); |
| |
| seq_printf(m, "Framing mode = %s\n",framing[translate]); |
| |
| seq_printf(m, "Last pkt signal lvl = %d\n", local->last_rsl); |
| |
| if (local->beacon_rxed) { |
| /* Pull some fields out of last beacon received */ |
| seq_printf(m, "Beacon Interval = %d Kus\n", |
| local->last_bcn.beacon_intvl[0] |
| + 256 * local->last_bcn.beacon_intvl[1]); |
| |
| p = local->last_bcn.elements; |
| if (p[0] == C_ESSID_ELEMENT_ID) p += p[1] + 2; |
| else { |
| seq_printf(m, "Parse beacon failed at essid element id = %d\n",p[0]); |
| return 0; |
| } |
| |
| if (p[0] == C_SUPPORTED_RATES_ELEMENT_ID) { |
| seq_puts(m, "Supported rate codes = "); |
| for (i=2; i<p[1] + 2; i++) |
| seq_printf(m, "0x%02x ", p[i]); |
| seq_putc(m, '\n'); |
| p += p[1] + 2; |
| } |
| else { |
| seq_puts(m, "Parse beacon failed at rates element\n"); |
| return 0; |
| } |
| |
| if (p[0] == C_FH_PARAM_SET_ELEMENT_ID) { |
| pfh = (struct freq_hop_element *)p; |
| seq_printf(m, "Hop dwell = %d Kus\n", |
| pfh->dwell_time[0] + 256 * pfh->dwell_time[1]); |
| seq_printf(m, "Hop set = %d \n", pfh->hop_set); |
| seq_printf(m, "Hop pattern = %d \n", pfh->hop_pattern); |
| seq_printf(m, "Hop index = %d \n", pfh->hop_index); |
| p += p[1] + 2; |
| } |
| else { |
| seq_puts(m, "Parse beacon failed at FH param element\n"); |
| return 0; |
| } |
| } else { |
| seq_puts(m, "No beacons received\n"); |
| } |
| return 0; |
| } |
| |
| static int ray_cs_proc_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ray_cs_proc_show, NULL); |
| } |
| |
| static const struct file_operations ray_cs_proc_fops = { |
| .owner = THIS_MODULE, |
| .open = ray_cs_proc_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| #endif |
| /*===========================================================================*/ |
| static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type) |
| { |
| int addr; |
| struct ccs __iomem *pccs; |
| struct tx_msg __iomem *ptx; |
| int ccsindex; |
| |
| /* If no tx buffers available, return */ |
| if ((ccsindex = get_free_tx_ccs(local)) < 0) |
| { |
| DEBUG(1,"ray_cs send authenticate - No free tx ccs\n"); |
| return -1; |
| } |
| |
| pccs = ccs_base(local) + ccsindex; |
| |
| /* Address in card space */ |
| addr = TX_BUF_BASE + (ccsindex << 11); |
| /* fill in the CCS */ |
| writeb(CCS_TX_REQUEST, &pccs->cmd); |
| writeb(addr >> 8, pccs->var.tx_request.tx_data_ptr); |
| writeb(0x20, pccs->var.tx_request.tx_data_ptr + 1); |
| writeb(TX_AUTHENTICATE_LENGTH_MSB, pccs->var.tx_request.tx_data_length); |
| writeb(TX_AUTHENTICATE_LENGTH_LSB,pccs->var.tx_request.tx_data_length + 1); |
| writeb(0, &pccs->var.tx_request.pow_sav_mode); |
| |
| ptx = local->sram + addr; |
| /* fill in the mac header */ |
| writeb(PROTOCOL_VER | AUTHENTIC_TYPE, &ptx->mac.frame_ctl_1); |
| writeb(0, &ptx->mac.frame_ctl_2); |
| |
| memcpy_toio(ptx->mac.addr_1, dest, ADDRLEN); |
| memcpy_toio(ptx->mac.addr_2, local->sparm.b4.a_mac_addr, ADDRLEN); |
| memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN); |
| |
| /* Fill in msg body with protocol 00 00, sequence 01 00 ,status 00 00 */ |
| memset_io(ptx->var, 0, 6); |
| writeb(auth_type & 0xff, ptx->var + 2); |
| |
| /* Interrupt the firmware to process the command */ |
| if (interrupt_ecf(local, ccsindex)) { |
| DEBUG(1,"ray_cs send authentication request failed - ECF not ready for intr\n"); |
| writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); |
| return -1; |
| } |
| return 0; |
| } /* End build_auth_frame */ |
| |
| /*===========================================================================*/ |
| #ifdef CONFIG_PROC_FS |
| static void raycs_write(const char *name, write_proc_t *w, void *data) |
| { |
| struct proc_dir_entry * entry = create_proc_entry(name, S_IFREG | S_IWUSR, NULL); |
| if (entry) { |
| entry->write_proc = w; |
| entry->data = data; |
| } |
| } |
| |
| static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data) |
| { |
| static char proc_essid[33]; |
| int len = count; |
| |
| if (len > 32) |
| len = 32; |
| memset(proc_essid, 0, 33); |
| if (copy_from_user(proc_essid, buffer, len)) |
| return -EFAULT; |
| essid = proc_essid; |
| return count; |
| } |
| |
| static int write_int(struct file *file, const char __user *buffer, unsigned long count, void *data) |
| { |
| static char proc_number[10]; |
| char *p; |
| int nr, len; |
| |
| if (!count) |
| return 0; |
| |
| if (count > 9) |
| return -EINVAL; |
| if (copy_from_user(proc_number, buffer, count)) |
| return -EFAULT; |
| p = proc_number; |
| nr = 0; |
| len = count; |
| do { |
| unsigned int c = *p - '0'; |
| if (c > 9) |
| return -EINVAL; |
| nr = nr*10 + c; |
| p++; |
| } while (--len); |
| *(int *)data = nr; |
| return count; |
| } |
| #endif |
| |
| static struct pcmcia_device_id ray_ids[] = { |
| PCMCIA_DEVICE_MANF_CARD(0x01a6, 0x0000), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, ray_ids); |
| |
| static struct pcmcia_driver ray_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "ray_cs", |
| }, |
| .probe = ray_probe, |
| .remove = ray_detach, |
| .id_table = ray_ids, |
| .suspend = ray_suspend, |
| .resume = ray_resume, |
| }; |
| |
| static int __init init_ray_cs(void) |
| { |
| int rc; |
| |
| DEBUG(1, "%s\n", rcsid); |
| rc = pcmcia_register_driver(&ray_driver); |
| DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",rc); |
| |
| #ifdef CONFIG_PROC_FS |
| proc_mkdir("driver/ray_cs", NULL); |
| |
| proc_create("driver/ray_cs/ray_cs", 0, NULL, &ray_cs_proc_fops); |
| raycs_write("driver/ray_cs/essid", write_essid, NULL); |
| raycs_write("driver/ray_cs/net_type", write_int, &net_type); |
| raycs_write("driver/ray_cs/translate", write_int, &translate); |
| #endif |
| if (translate != 0) translate = 1; |
| return 0; |
| } /* init_ray_cs */ |
| |
| /*===========================================================================*/ |
| |
| static void __exit exit_ray_cs(void) |
| { |
| DEBUG(0, "ray_cs: cleanup_module\n"); |
| |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry("driver/ray_cs/ray_cs", NULL); |
| remove_proc_entry("driver/ray_cs/essid", NULL); |
| remove_proc_entry("driver/ray_cs/net_type", NULL); |
| remove_proc_entry("driver/ray_cs/translate", NULL); |
| remove_proc_entry("driver/ray_cs", NULL); |
| #endif |
| |
| pcmcia_unregister_driver(&ray_driver); |
| } /* exit_ray_cs */ |
| |
| module_init(init_ray_cs); |
| module_exit(exit_ray_cs); |
| |
| /*===========================================================================*/ |