arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2017 Luxul Inc.
 */

/dts-v1/;

#include "bcm47081.dtsi"
#include "bcm5301x-nand-cs0-bch4.dtsi"

/ {
	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
	model = "Luxul XWR-1200 V1";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x00000000 0x08000000>;
	};

	nvram@1eff0000 {
		compatible = "brcm,nvram";
		reg = <0x1eff0000 0x10000>;
	};

	leds {
		compatible = "gpio-leds";

		power {
			label = "bcm53xx:green:power";
			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "default-on";
		};

		lan3 {
			label = "bcm53xx:green:lan3";
			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		lan4 {
			label = "bcm53xx:green:lan4";
			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		wan {
			label = "bcm53xx:green:wan";
			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		lan2 {
			label = "bcm53xx:green:lan2";
			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		usb {
			label = "bcm53xx:green:usb";
			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
			trigger-sources = <&ohci_port2>, <&ehci_port2>;
			linux,default-trigger = "usbport";
		};

		status {
			label = "bcm53xx:green:status";
			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "timer";
		};

		2ghz {
			label = "bcm53xx:green:2ghz";
			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		5ghz {
			label = "bcm53xx:green:5ghz";
			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		lan1 {
			label = "bcm53xx:green:lan1";
			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		restart {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
		};
	};
};

&usb2 {
	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};

&spi_nor {
	status = "okay";
};

&srab {
	status = "okay";

	ports {
		port@0 {
			reg = <0>;
			label = "lan4";
		};

		port@1 {
			reg = <1>;
			label = "lan3";
		};

		port@2 {
			reg = <2>;
			label = "lan2";
		};

		port@3 {
			reg = <3>;
			label = "lan1";
		};

		port@4 {
			reg = <4>;
			label = "wan";
		};

		port@5 {
			reg = <5>;
			label = "cpu";
			ethernet = <&gmac0>;
		};
	};
};